public void ConnectTest4()
{
TECProtocol firstProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol secondProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol thirdProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol fourthProtocol = new TECProtocol(new List <TECConnectionType>());
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>()
{
secondProtocol, firstProtocol, fourthProtocol
}, new TECManufacturer());
TECSubScope subScope1 = new TECSubScope();
subScope1.Devices.Add(compatibleDevice);
TECSubScope subScope2 = new TECSubScope();
subScope2.Devices.Add(compatibleDevice);
TECSubScope subScope3 = new TECSubScope();
subScope3.Devices.Add(compatibleDevice);
TECSubScope subScope4 = new TECSubScope();
subScope4.Devices.Add(compatibleDevice);
List <IConnectable> connectables = new List <IConnectable>
{
subScope1,
subScope2,
subScope3,
subScope4
};
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(firstProtocol));
TECProvidedController controller = new TECProvidedController(type);
foreach (var subScope in connectables)
{
TECNetworkConnection connection = controller.Connect(subScope, firstProtocol) as TECNetworkConnection;
Assert.IsTrue(connection.Children.Contains(subScope));
Assert.IsTrue(controller.ChildrenConnections.Contains(connection));
Assert.IsTrue((subScope as IConnectable).GetParentConnection() == connection);
Assert.IsTrue(connection.Protocol == firstProtocol);
}
}
public void CanChangeTypeTest()
{
TECControllerType cType = new TECControllerType(new TECManufacturer());
TECProtocol protocol = new TECProtocol(new List <TECConnectionType>());
cType.IO.Add(new TECIO(protocol));
cType.IO.Add(new TECIO(IOType.AI));
TECControllerType otherCType = new TECControllerType(new TECManufacturer());
otherCType.IO.Add(new TECIO(protocol));
otherCType.IO.Add(new TECIO(IOType.AI));
TECProvidedController controller = new TECProvidedController(cType);
TECSubScope ss1 = new TECSubScope();
TECSubScope ss2 = new TECSubScope();
TECDevice proDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>()
{
protocol
}, new TECManufacturer());
TECDevice hardDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>(), new TECManufacturer());
ss1.Devices.Add(proDevice);
ss2.Devices.Add(hardDevice);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
ss2.AddPoint(point);
controller.Connect(ss1, protocol);
controller.Connect(ss2, ss2.HardwiredProtocol());
Assert.IsTrue(controller.CanChangeType(otherCType));
}
public void AddConnection()
{
//Arrange
TECControllerType controllerType = new TECControllerType(bid.Catalogs.Manufacturers[0]);
bid.Catalogs.Add(controllerType);
TECTypical typical = new TECTypical();
bid.Systems.Add(typical);
TECController controller = new TECProvidedController(controllerType);
typical.AddController(controller);
TECEquipment typEquip = new TECEquipment();
typical.Equipment.Add(typEquip);
TECSubScope typSS = new TECSubScope();
typEquip.SubScope.Add(typSS);
ObservableCollection <TECConnectionType> connectionTypes = new ObservableCollection <TECConnectionType>();
connectionTypes.Add(bid.Catalogs.ConnectionTypes[0]);
TECDevice dev = new TECDevice(connectionTypes, new List <TECProtocol>(), bid.Catalogs.Manufacturers[0]);
bid.Catalogs.Add(dev);
typSS.Devices.Add(dev);
MaterialSummaryVM matVM = new MaterialSummaryVM(bid, cw);
//Act
IControllerConnection connection = controller.Connect(typSS, (typSS as IConnectable).AvailableProtocols.First());
connection.Length = 50;
connection.ConduitLength = 50;
connection.ConduitType = bid.Catalogs.ConduitTypes[0];
TECSystem instance = typical.AddInstance();
TECSubScope instanceSubScope = instance.GetAllSubScope()[0];
//Assert
AssertMaterialVMMatchesCostBatch(matVM, connection.CostBatch);
}
public void RemoveConnection()
{
//Arrange
TECController controller = new TECProvidedController(bid.Catalogs.ControllerTypes[0]);
bid.AddController(controller);
TECTypical typical = new TECTypical();
bid.Systems.Add(typical);
TECEquipment typEquip = new TECEquipment();
typical.Equipment.Add(typEquip);
TECSubScope ss = new TECSubScope();
ss.Devices.Add(bid.Catalogs.Devices[0]);
typEquip.SubScope.Add(ss);
TECSystem instance = typical.AddInstance();
TECSubScope instanceSubScope = instance.GetAllSubScope().First(sub => sub.AvailableProtocols.Any(prot => prot is TECHardwiredProtocol));
IConnection connection = controller.Connect(instanceSubScope, (instanceSubScope as IConnectable).AvailableProtocols.First(x => x is TECHardwiredProtocol));
connection.Length = 50;
connection.ConduitLength = 50;
connection.ConduitType = bid.Catalogs.ConduitTypes[0];
MaterialSummaryVM matVM = new MaterialSummaryVM(bid, cw);
CostBatch expected = MatVMToCostBatch(matVM) - connection.CostBatch;
//Act
controller.Disconnect(instanceSubScope);
//Assert
AssertMaterialVMMatchesCostBatch(matVM, expected);
}
public void RemoveDeviceFromConnectedHardwired()
{
TECControllerType type = new TECControllerType(new TECManufacturer());
TECProvidedController controller = new TECProvidedController(type);
TECConnectionType connectionType = new TECConnectionType();
TECDevice device = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(device);
TECHardwiredConnection connection = controller.Connect(subScope, subScope.HardwiredProtocol()) as TECHardwiredConnection;
subScope.RemoveDevice(device);
Assert.IsNull((subScope as IConnectable).GetParentConnection());
Assert.IsFalse(controller.ChildrenConnections.Contains(connection));
}
public void AddTypicalSubScopeConnectionToController()
{
//Arrange
TECControllerType controllerType = new TECControllerType(bid.Catalogs.Manufacturers[0]);
bid.Catalogs.Add(controllerType);
TECController controller = new TECProvidedController(controllerType);
bid.AddController(controller);
TECTypical typical = new TECTypical();
TECEquipment equip = new TECEquipment();
typical.Equipment.Add(equip);
TECSubScope ss = new TECSubScope();
equip.SubScope.Add(ss);
TECDevice dev = bid.Catalogs.Devices[0];
ss.Devices.Add(dev);
bid.Systems.Add(typical);
MaterialSummaryVM matVM = new MaterialSummaryVM(bid, cw);
//Act
IControllerConnection connection = controller.Connect(ss, (ss as IConnectable).AvailableProtocols.First(y => y is TECHardwiredProtocol));
connection.Length = 100;
connection.ConduitLength = 100;
connection.ConduitType = bid.Catalogs.ConduitTypes[0];
AssertMaterialVMMatchesCostBatch(matVM, connection.CostBatch);
}
public void RemoveDeviceFromConnectedNetwork()
{
TECControllerType type = new TECControllerType(new TECManufacturer());
TECProtocol protocol = new TECProtocol(new List <TECConnectionType>());
type.IO.Add(new TECIO(protocol));
TECProvidedController controller = new TECProvidedController(type);
TECDevice device = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol> {
protocol
}, new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(device);
IControllerConnection connection = controller.Connect(subScope, protocol);
subScope.RemoveDevice(device);
Assert.IsNull((subScope as IConnectable).GetParentConnection());
Assert.IsTrue(controller.ChildrenConnections.Contains(connection));
}
public void ConnectTest3()
{
TECConnectionType connectionType = new TECConnectionType();
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(compatibleDevice);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
subScope.Points.Add(point);
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(IOType.AO));
TECProvidedController controller = new TECProvidedController(type);
TECHardwiredConnection connection = controller.Connect(subScope, subScope.AvailableProtocols.First(x => x is TECHardwiredProtocol)) as TECHardwiredConnection;
Assert.IsNull(connection);
}
public void RemovePointFromConnectedNetwork()
{
TECControllerType type = new TECControllerType(new TECManufacturer());
TECProtocol protocol = new TECProtocol(new List <TECConnectionType>());
type.IO.Add(new TECIO(IOType.AI));
type.IO.Add(new TECIO(protocol));
TECProvidedController controller = new TECProvidedController(type);
TECDevice device = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol> {
protocol
}, new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(device);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
subScope.AddPoint(point);
TECPoint otherPoint = new TECPoint();
otherPoint.Type = IOType.AI;
controller.Connect(subScope, protocol);
subScope.RemovePoint(point);
Assert.IsFalse(subScope.Points.Contains(point));
Assert.IsTrue(controller.AvailableIO.IONumber(IOType.AI) == 1);
subScope.RemovePoint(otherPoint);
Assert.IsFalse(subScope.Points.Contains(otherPoint));
Assert.IsTrue(controller.AvailableIO.IONumber(IOType.AI) == 1);
}
private void addTypicalExecute()
{
TECTypical typical = new TECTypical();
typical.Name = "test";
TECEquipment equipment = new TECEquipment();
equipment.Name = "test equipment";
TECSubScope ss = new TECSubScope();
ss.Name = "Test Subscope";
ss.AddDevice(bid.Catalogs.Devices[0]);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
point.Quantity = 1;
ss.AddPoint(point);
equipment.SubScope.Add(ss);
typical.Equipment.Add(equipment);
TECSubScope connected = new TECSubScope();
connected.Name = "Connected";
connected.AddDevice(bid.Catalogs.Devices[0]);
TECPoint point2 = new TECPoint();
point2.Type = IOType.AI;
point2.Quantity = 1;
connected.AddPoint(point2);
equipment.SubScope.Add(connected);
TECSubScope toConnect = new TECSubScope();
toConnect.Name = "To Connect";
toConnect.AddDevice(bid.Catalogs.Devices[0]);
TECPoint point3 = new TECPoint();
point3.Type = IOType.AI;
point3.Quantity = 1;
toConnect.AddPoint(point3);
equipment.SubScope.Add(toConnect);
TECControllerType controllerType = new TECControllerType(new TECManufacturer());
controllerType.IOModules.Add(bid.Catalogs.IOModules[0]);
TECIO io = new TECIO(IOType.AI);
io.Quantity = 10;
controllerType.IO.Add(io);
bid.Catalogs.IOModules[0].IO.Add(io);
controllerType.Name = "Test Type";
TECProvidedController controller = new TECProvidedController(controllerType);
controller.IOModules.Add(bid.Catalogs.IOModules[0]);
controller.Name = "Test Controller";
typical.AddController(controller);
TECProvidedController otherController = new TECProvidedController(controllerType);
otherController.Name = "Other Controller";
typical.AddController(otherController);
IControllerConnection connection = controller.Connect(connected, (connected as IConnectable).AvailableProtocols.First());
connection.Length = 10;
connection.ConduitLength = 20;
connection.ConduitType = bid.Catalogs.ConduitTypes[1];
TECPanelType panelType = new TECPanelType(new TECManufacturer());
panelType.Name = "test type";
TECPanel panel = new TECPanel(panelType);
panel.Name = "Test Panel";
typical.Panels.Add(panel);
TECMisc misc = new TECMisc(CostType.TEC);
misc.Name = "test Misc";
typical.MiscCosts.Add(misc);
bid.Systems.Add(typical);
typical.AddInstance();
}
public void RemoveAllChildConnectionsTest()
{
TECConnectionType connectionType = new TECConnectionType();
TECProtocol firstProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol secondProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol thirdProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol fourthProtocol = new TECProtocol(new List <TECConnectionType>());
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>()
{
secondProtocol, firstProtocol, fourthProtocol
}, new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(compatibleDevice);
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(firstProtocol));
type.IO.Add(new TECIO(secondProtocol));
type.IO.Add(new TECIO(thirdProtocol));
TECProvidedController controller = new TECProvidedController(type);
TECNetworkConnection connection = controller.Connect(subScope, firstProtocol) as TECNetworkConnection;
TECDevice compatibleHardDevice = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
TECSubScope hardSubScope = new TECSubScope();
hardSubScope.Devices.Add(compatibleDevice);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
hardSubScope.Points.Add(point);
type.IO.Add(new TECIO(IOType.AI));
TECHardwiredConnection hardConnection = controller.Connect(hardSubScope, hardSubScope.AvailableProtocols.First(x => x is TECHardwiredProtocol)) as TECHardwiredConnection;
TECController parentController = new TECProvidedController(type);
parentController.Connect(controller, secondProtocol);
Assert.IsNotNull(controller.ParentConnection);
controller.RemoveAllChildConnections();
Assert.IsFalse(connection.Children.Contains(subScope));
Assert.IsFalse(controller.ChildrenConnections.Contains(connection));
Assert.IsNull((subScope as IConnectable).GetParentConnection());
Assert.IsFalse(controller.ChildrenConnections.Contains(hardConnection));
Assert.IsNull((hardSubScope as IConnectable).GetParentConnection());
Assert.IsNotNull(controller.ParentConnection);
}
public static TECBid CreateTestBid()
{
TECBid bid = new TECBid();
//Bid Info
bid.Name = "Bid Name";
bid.BidNumber = "1701-117";
bid.DueDate = DateTime.Now;
bid.Salesperson = "Mrs. Test";
bid.Estimator = "Mr. Test";
//Bid Objects
bid.ExtraLabor = CreateTestExtraLabor(bid.Guid);
bid.Parameters = CreateTestParameters(bid.Guid);
bid.Catalogs = CreateTestCatalogs();
//Internal Notes
TECInternalNote internalNote = new TECInternalNote();
internalNote.Label = "Test internal";
internalNote.Body = "Test body";
bid.InternalNotes.Add(internalNote);
//Locations
var cellar = new TECLocation();
cellar.Name = "Cellar";
cellar.Label = "C";
var location1 = new TECLocation();
location1.Name = "1st Floor";
location1.Label = "1";
var location2 = new TECLocation();
location2.Name = "2nd Floor";
location2.Label = "2";
var location3 = new TECLocation();
location3.Name = "3rd Floor";
location3.Label = "3";
bid.Locations.Add(cellar);
bid.Locations.Add(location1);
bid.Locations.Add(location2);
bid.Locations.Add(location3);
//Scope Branches
var branch1 = new TECScopeBranch(false);
branch1.Label = "Branch 1";
var branch2 = new TECScopeBranch(false);
branch2.Label = "Branch 2";
var branch3 = new TECScopeBranch(false);
branch3.Label = "Branch 3";
bid.ScopeTree.Add(branch1);
branch1.Branches.Add(branch2);
branch2.Branches.Add(branch3);
//Notes
var note1 = new TECLabeled();
note1.Label = "Note 1";
bid.Notes.Add(note1);
//Exclusions
var exclusion1 = new TECLabeled();
exclusion1.Label = "Exclusion 1";
bid.Exclusions.Add(exclusion1);
//Controller
TECController expectedController = new TECProvidedController(Guid.NewGuid(), bid.Catalogs.ControllerTypes[0], false);
expectedController.Name = "Test Controller";
expectedController.Description = "Test description";
bid.AddController(expectedController);
//Misc Cost
TECMisc cost = new TECMisc(CostType.TEC, false);
cost.Name = "Test Cost";
cost.Cost = 69.69;
cost.Quantity = 69;
bid.MiscCosts.Add(cost);
//Misc wiring
TECMisc wiring = new TECMisc(CostType.Electrical, false);
wiring.Name = "Test Wiring";
wiring.Cost = 69.69;
wiring.Quantity = 69;
bid.MiscCosts.Add(wiring);
//Panels
TECPanel panel = new TECPanel(bid.Catalogs.PanelTypes[0], false);
panel.Name = "Test Panel";
panel.Controllers.Add(expectedController);
panel.AssociatedCosts.Add(bid.Catalogs.AssociatedCosts[0]);
panel.AssociatedCosts.Add(bid.Catalogs.AssociatedCosts[0]);
bid.Panels.Add(panel);
//Systems
var system1 = CreateTestTypical(bid.Catalogs);
system1.Name = "System 1";
system1.Description = "Locations all the way";
system1.Location = cellar;
var system2 = CreateTestTypical(bid.Catalogs);
system2.Name = "System 2";
system2.Description = "Description 2";
var system3 = CreateTestTypical(bid.Catalogs);
system3.Name = "System 3";
system3.Description = "";
bid.Systems.Add(system1);
bid.Systems.Add(system2);
bid.Systems.Add(system3);
system1.AddInstance(bid);
system2.AddInstance(bid);
system3.AddInstance(bid);
system1.AddInstance(bid);
system2.AddInstance(bid);
system3.AddInstance(bid);
//Equipment
var equipment1 = new TECEquipment(true);
equipment1.Name = "Equipment 1";
equipment1.Description = "Description 1";
var equipment2 = new TECEquipment(true);
equipment2.Name = "Equipment 2";
equipment2.Description = "Description 2";
system1.Equipment.Add(equipment1);
system3.Equipment.Add(equipment2);
//SubScope
var subScope1 = new TECSubScope(true);
subScope1.Name = "SubScope 1";
subScope1.Description = "Description 1";
subScope1.AssociatedCosts.Add(bid.Catalogs.AssociatedCosts[0]);
subScope1.AssociatedCosts.Add(bid.Catalogs.AssociatedCosts[0]);
subScope1.AssociatedCosts.Add(bid.Catalogs.AssociatedCosts[0]);
var subScope2 = new TECSubScope(true);
subScope2.Name = "Empty SubScope";
subScope2.Description = "Description 2";
subScope2.AssociatedCosts.Add(bid.Catalogs.AssociatedCosts[0]);
equipment1.SubScope.Add(subScope1);
equipment2.SubScope.Add(subScope2);
//Points
var point1 = new TECPoint(true);
point1.Label = "Point 1";
point1.Type = IOType.AI;
point1.Quantity = 2;
subScope1.Points.Add(point1);
var point2 = new TECPoint(true);
point2.Label = "Point 2";
point2.Type = IOType.AI;
point2.Quantity = 2;
subScope2.Points.Add(point2);
//Devices
subScope1.Devices.Add(bid.Catalogs.Devices[0]);
//Connections
TECSubScope instanceSubScope = system1.GetInstancesFromTypical(subScope1)[0];
IControllerConnection testConnection = expectedController.Connect(instanceSubScope, (instanceSubScope as IConnectable).AvailableProtocols.First());
testConnection.ConduitType = bid.Catalogs.ConduitTypes[0];
testConnection.Length = 42;
AssignAllSecondaryProperties(bid);
TECTypical noLocation = new TECTypical();
noLocation.Name = "No Location";
noLocation.Equipment.Add(new TECEquipment(true));
noLocation.Equipment[0].SubScope.Add(new TECSubScope(true));
bid.Systems.Add(noLocation);
return(bid);
}
public void ConnectTest6()
{
TECProtocol firstProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol secondProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol thirdProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol fourthProtocol = new TECProtocol(new List <TECConnectionType>());
TECConnectionType connectionType = new TECConnectionType();
TECDevice hardDevice = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
TECSubScope hSubScope1 = new TECSubScope();
hSubScope1.Devices.Add(hardDevice);
hSubScope1.Points.Add(new TECPoint {
Type = IOType.AI
});
TECSubScope hSubScope2 = new TECSubScope();
hSubScope2.Devices.Add(hardDevice);
hSubScope2.Points.Add(new TECPoint {
Type = IOType.AI
});
TECSubScope hSubScope3 = new TECSubScope();
hSubScope3.Devices.Add(hardDevice);
hSubScope3.Points.Add(new TECPoint {
Type = IOType.AI
});
TECSubScope hSubScope4 = new TECSubScope();
hSubScope4.Devices.Add(hardDevice);
hSubScope4.Points.Add(new TECPoint {
Type = IOType.AI
});
TECSubScope hSubScope5 = new TECSubScope();
hSubScope5.Devices.Add(hardDevice);
hSubScope5.Points.Add(new TECPoint {
Type = IOType.AI
});
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>()
{
secondProtocol, firstProtocol, fourthProtocol
}, new TECManufacturer());
TECSubScope subScope1 = new TECSubScope();
subScope1.Devices.Add(compatibleDevice);
TECSubScope subScope2 = new TECSubScope();
subScope2.Devices.Add(compatibleDevice);
TECSubScope subScope3 = new TECSubScope();
subScope3.Devices.Add(compatibleDevice);
TECSubScope subScope4 = new TECSubScope();
subScope4.Devices.Add(compatibleDevice);
List <IConnectable> connectables = new List <IConnectable>
{
subScope1,
subScope2,
subScope3,
subScope4,
hSubScope1,
hSubScope2,
hSubScope3,
hSubScope4,
hSubScope5
};
TECControllerType type = new TECControllerType(new TECManufacturer());
TECIOModule module = new TECIOModule(new TECManufacturer());
module.IO.Add(new TECIO(firstProtocol));
TECIOModule hModule = new TECIOModule(new TECManufacturer());
hModule.IO.Add(new TECIO(IOType.AI)
{
Quantity = 2
});
type.IOModules.Add(module);
type.IOModules.Add(hModule);
type.IOModules.Add(hModule);
type.IOModules.Add(hModule);
TECProvidedController controller = new TECProvidedController(type);
foreach (var subScope in connectables)
{
IProtocol protocol = subScope.HardwiredProtocol() as IProtocol ?? firstProtocol;
IControllerConnection connection = controller.Connect(subScope, protocol);
bool containsChild = connection is TECNetworkConnection netConnect?
netConnect.Children.Contains(subScope) : (connection as TECHardwiredConnection).Child == subScope;
Assert.IsTrue(containsChild);
Assert.IsTrue(controller.ChildrenConnections.Contains(connection));
Assert.IsTrue((subScope as IConnectable).GetParentConnection() == connection);
Assert.AreEqual(connection.Protocol, protocol);
}
}