//---- end of spin_exhibition_group stuff
private void on_button_exhibition_select_clicked(object o, EventArgs args)
{
//select session
string newSessionName = string.Format("{0}-{1}", spin_exhibition_school.Value, spin_exhibition_group.Value);
if (currentSession == null || currentSession.Name != newSessionName)
{
currentSession = SqliteSession.SelectByName(newSessionName);
on_load_session_accepted();
sensitiveGuiYesSession();
}
//select person
int rowToSelect = myTreeViewPersons.FindRow(Convert.ToInt32(spin_exhibition_id.Value));
if (rowToSelect != -1)
{
selectRowTreeView_persons(treeview_persons, rowToSelect);
sensitiveGuiYesPerson();
}
}
private void configInit()
{
//trying new Config class
Config config = new Config();
config.Read();
LogB.Information("Config:\n" + config.ToString());
/*
* TODO: do an else to any option
* is good to do the else here because user can import a configuration at any time
* and things need to be restored to default position in glade
*
* But note this has to be executed only if it has changed!!
*/
if (config.Maximized)
{
app1.Maximize();
}
if (config.CustomButtons)
{
//---- capture tab ----
hbox_encoder_capture_extra_mass_no_raspberry.Visible = false;
hbox_encoder_capture_extra_mass_raspberry.Visible = true;
button_encoder_select.HeightRequest = 40;
//this will make all encoder capture controls taller
//88 then buttons will be the same height than button_encoder_select. The 8 extra is for the vertical space
button_encoder_capture.SetSizeRequest(125, 88);
//button_encoder_capture.HeightRequest = 88;
spin_encoder_im_weights_n.Visible = false;
hbox_encoder_im_weights_n.Visible = true;
//---- analyze tab ----
hbox_encoder_analyze_signal_or_curves.HeightRequest = 40;
button_encoder_analyze.SetSizeRequest(120, 40);
}
if (!config.UseVideo)
{
useVideo = false;
alignment_video_encoder.Visible = false;
}
//Auto-detect stuff
configAutodetectPort = config.AutodetectPort;
autodetectSignalEnabled = false; //do not raise signals that could rewrite the config file (loop)
if (configAutodetectPort == Config.AutodetectPortEnum.ACTIVE)
{
radio_autodetect_active.Active = true;
}
else if (configAutodetectPort == Config.AutodetectPortEnum.INACTIVE)
{
radio_autodetect_inactive.Active = true;
}
else // (configAutodetectPort == Config.AutodetectPortEnum.DISCARDFIRST)
{
radio_autodetect_discard_first.Active = true;
}
autodetectSignalEnabled = true; //activate signals again
//show only power
if (config.OnlyEncoderGravitatory)
{
select_menuitem_mode_toggled(menuitem_modes.POWERGRAVITATORY);
}
else if (config.OnlyEncoderInertial)
{
select_menuitem_mode_toggled(menuitem_modes.POWERINERTIAL);
}
if (config.EncoderCaptureShowOnlyBars)
{
vpaned_encoder_capture_video_and_set_graph.Visible = false;
vpaned_encoder_main.Remove(alignment_treeview_encoder_capture_curves);
vbox_treeview_encoder_at_second_page.PackStart(alignment_treeview_encoder_capture_curves);
notebook_encoder_capture_main.ShowTabs = true;
}
else
{
/*
* is good to do the else here because user can import a configuration at any time
* and things need to be restored to default position in glade
*
* But note this has to be executed only if it has changed!!
*/
/*
* notebook_encoder_capture_main.ShowTabs = false;
* vbox_treeview_encoder_at_second_page.Remove(alignment_treeview_encoder_capture_curves);
* vpaned_encoder_main.PackStart(alignment_treeview_encoder_capture_curves);
*/
}
encoderUpdateTreeViewWhileCapturing = config.EncoderUpdateTreeViewWhileCapturing;
if (config.PersonWinHide)
{
//vbox_persons.Visible = false;
notebook_session_person.Visible = false;
hbox_encoder_person.Visible = true;
}
if (config.EncoderAnalyzeHide)
{
hbox_encoder_sup_capture_analyze_two_buttons.Visible = false;
}
if (config.Econf != null)
{
encoderConfigurationDefinedFromFile = true;
encoderConfigurationCurrent = config.Econf;
encoderConfigurationGUIUpdate();
//TODO: allow to see full data, but don't allow to change it (Open window content as unsensitive)
}
if (config.SessionMode == Config.SessionModeEnum.UNIQUE)
{
main_menu.Visible = false;
button_preferences_not_menu.Visible = true;
if (!Sqlite.Exists(false, Constants.SessionTable, "session"))
{
//this creates the session and inserts at DB
currentSession = new Session(
"session", "", DateTime.Today, //name, place, dateTime
Constants.SportUndefinedID, Constants.SpeciallityUndefinedID, Constants.LevelUndefinedID,
"", Constants.ServerUndefinedID); //comments, serverID
}
else
{
currentSession = SqliteSession.SelectByName("session");
}
on_load_session_accepted();
}
//TODO
//RunScriptOnExit
/*
* if(linuxType == linuxTypeEnum.NETWORKS) {
* //mostrar directament el power
* select_menuitem_mode_toggled(menuitem_modes.POWER);
*
* //no mostrar menu
* main_menu.Visible = false;
*
* //no mostrar persones
* //vbox_persons.Visible = false;
* //TODO: rfid can be here, also machine, maybe weight, other features
* //time, gym, ...
*
* //show rfid
* hbox_rfid.Visible = true;
*
* //to test display, just make sensitive the top controls, but beware there's no session yet and no person
* notebook_sup.Sensitive = true;
* hbox_encoder_sup_capture_analyze.Sensitive = true;
* notebook_encoder_sup.Sensitive = false;
* }
*/
}
private void configInit()
{
//trying new Config class
configChronojump = new Config();
configChronojump.Read();
LogB.Information("Config:\n" + configChronojump.ToString());
/*
* TODO: do an else to any option
* is good to do the else here because user can import a configuration at any time
* and things need to be restored to default position in glade
*
* But note this has to be executed only if it has changed!!
*/
if (configChronojump.Maximized)
{
app1.Maximize();
}
if (configChronojump.CustomButtons)
{
//---- capture tab ----
hbox_encoder_capture_extra_mass_no_raspberry.Visible = false;
hbox_encoder_capture_extra_mass_raspberry.Visible = true;
button_encoder_select.HeightRequest = 40;
//this will make all encoder capture controls taller
button_encoder_capture.SetSizeRequest(125, 60);
spin_encoder_im_weights_n.Visible = false;
hbox_encoder_im_weights_n.Visible = true;
//---- analyze tab ----
hbox_encoder_analyze_signal_or_curves.HeightRequest = 40;
button_encoder_analyze.SetSizeRequest(120, 40);
}
if (!configChronojump.UseVideo)
{
alignment_video_encoder.Visible = false;
}
//show only power
if (configChronojump.OnlyEncoderGravitatory)
{
select_menuitem_mode_toggled(Constants.Menuitem_modes.POWERGRAVITATORY);
}
else if (configChronojump.OnlyEncoderInertial)
{
select_menuitem_mode_toggled(Constants.Menuitem_modes.POWERINERTIAL);
}
if (configChronojump.EncoderCaptureShowOnlyBars)
{
//attention: this makes encoder_capture_signal_drawingarea == null
vpaned_encoder_capture_video_and_set_graph.Visible = false;
vpaned_encoder_main.Remove(alignment_treeview_encoder_capture_curves);
vbox_treeview_encoder_at_second_page.PackStart(alignment_treeview_encoder_capture_curves);
notebook_encoder_capture_main.ShowTabs = true;
}
else
{
/*
* is good to do the else here because user can import a configuration at any time
* and things need to be restored to default position in glade
*
* But note this has to be executed only if it has changed!!
*/
/*
* notebook_encoder_capture_main.ShowTabs = false;
* vbox_treeview_encoder_at_second_page.Remove(alignment_treeview_encoder_capture_curves);
* vpaned_encoder_main.PackStart(alignment_treeview_encoder_capture_curves);
*/
}
encoderUpdateTreeViewWhileCapturing = configChronojump.EncoderUpdateTreeViewWhileCapturing;
if (configChronojump.PersonWinHide)
{
//vbox_persons.Visible = false;
notebook_session_person.Visible = false;
hbox_encoder_person.Visible = true;
}
if (configChronojump.EncoderAnalyzeHide)
{
hbox_encoder_sup_capture_analyze_two_buttons.Visible = false;
}
if (configChronojump.SessionMode == Config.SessionModeEnum.UNIQUE || configChronojump.SessionMode == Config.SessionModeEnum.MONTHLY)
{
main_menu.Visible = false;
app1.Decorated = false;
hbox_menu_and_preferences_outside_menu.Visible = true;
if (configChronojump.SessionMode == Config.SessionModeEnum.UNIQUE)
{
if (!Sqlite.Exists(false, Constants.SessionTable, "session"))
{
//this creates the session and inserts at DB
currentSession = new Session(
"session", "", DateTime.Today, //name, place, dateTime
Constants.SportUndefinedID, Constants.SpeciallityUndefinedID, Constants.LevelUndefinedID,
"", Constants.ServerUndefinedID); //comments, serverID
}
else
{
currentSession = SqliteSession.SelectByName("session");
}
}
else
{
//configChronojump.SessionMode == Config.SessionModeEnum.MONTHLY
string yearMonthStr = UtilDate.GetCurrentYearMonthStr();
LogB.Information("yearMonthStr: " + yearMonthStr);
if (!Sqlite.Exists(false, Constants.SessionTable, yearMonthStr))
{
//this creates the session and inserts at DB
currentSession = new Session(
yearMonthStr, "", DateTime.Today, //name, place, dateTime
Constants.SportUndefinedID, Constants.SpeciallityUndefinedID, Constants.LevelUndefinedID,
"", Constants.ServerUndefinedID); //comments, serverID
//insert personSessions from last month
string yearLastMonthStr = UtilDate.GetCurrentYearLastMonthStr();
if (Sqlite.Exists(false, Constants.SessionTable, yearLastMonthStr))
{
Session s = SqliteSession.SelectByName(yearLastMonthStr);
//import all persons from last session
List <PersonSession> personSessions = SqlitePersonSession.SelectPersonSessionList(s.UniqueID);
//convert all personSessions to currentSession
//and nullify UniqueID in order to be inserted incrementally by SQL
foreach (PersonSession ps in personSessions)
{
ps.UniqueID = -1;
ps.SessionID = currentSession.UniqueID;
}
//insert personSessions using a transaction
new SqlitePersonSessionTransaction(personSessions);
}
}
else
{
currentSession = SqliteSession.SelectByName(yearMonthStr);
}
}
on_load_session_accepted();
}
//TODO
//RunScriptOnExit
/*
* if(linuxType == linuxTypeEnum.NETWORKS) {
* //mostrar directament el power
* select_menuitem_mode_toggled(Constants.Menuitem_modes.POWER);
*
* //no mostrar menu
* main_menu.Visible = false;
*
* //no mostrar persones
* //vbox_persons.Visible = false;
* //TODO: rfid can be here, also machine, maybe weight, other features
* //time, gym, ...
*
* //show rfid
* hbox_rfid.Visible = true;
*
* //to test display, just make sensitive the top controls, but beware there's no session yet and no person
* notebook_sup.Sensitive = true;
* hbox_encoder_sup_capture_analyze.Sensitive = true;
* notebook_encoder_sup.Sensitive = false;
* }
*/
hbox_rfid.Visible = (UtilAll.GetOSEnum() == UtilAll.OperatingSystems.LINUX);
}