/// <summary>
/// Load configuration information for a solution
/// </summary>
public void Load (Solution sol, SolutionItem project, SolutionItemRunConfiguration runConfig)
{
currentSolutionConfigurations.Clear ();
currentTargetPartitions.Clear ();
reducedConfigurations.Clear ();
if (sol == null)
return;
// Create a set of configuration partitions. Each partition will contain configurations
// which are implicitly selected when selecting an execution target. For example, in
// an iOS project we would have two partitions:
// 1) Debug|IPhoneSimulator, Release|IPhoneSimulator
// targets: iPhone, iPad
// 2) Debug|IPhone, Release|IPhone
// targets: device
List<TargetPartition> partitions = new List<TargetPartition> ();
if (project != null) {
foreach (var conf in project.Configurations) {
var targets = project.GetExecutionTargets (conf.Selector, runConfig);
if (!targets.Any ()) {
targets = new ExecutionTarget[] { dummyExecutionTarget };
}
var parts = partitions.Where (p => targets.Any (p.Targets.Contains)).ToArray();
if (parts.Length == 0) {
// Create a new partition for this configuration
var p = new TargetPartition ();
p.Configurations.Add (conf.Id);
p.Targets.UnionWith (targets);
partitions.Add (p);
}
else if (parts.Length == 1) {
// Register the configuration into an existing partition
parts[0].Configurations.Add (conf.Id);
parts[0].Targets.UnionWith (targets);
}
else {
// The partitions have to be merged into a single one
for (int n=1; n<parts.Length; n++) {
parts[0].Configurations.UnionWith (parts[n].Configurations);
parts[0].Targets.UnionWith (parts[n].Targets);
partitions.Remove (parts[n]);
}
}
}
// The startup project configuration partitions are used to create solution configuration partitions
foreach (var solConf in sol.Configurations) {
var pconf = solConf.GetEntryForItem (project);
if (pconf != null && pconf.Build) {
var part = partitions.FirstOrDefault (p => p.Configurations.Contains (pconf.ItemConfiguration));
if (part != null) {
part.SolutionConfigurations.Add (solConf.Id);
continue;
}
}
// The solution configuration is not bound to the startup project
// Add it to all partitions so that it can still take part of
// the solution configuration simplification process
foreach (var p in partitions)
p.SolutionConfigurations.Add (solConf.Id);
}
}
if (partitions.Count == 0) {
// There is no startup project, just use all solution configurations in this case
var p = new TargetPartition ();
p.SolutionConfigurations.AddRange (sol.GetConfigurations ());
partitions.Add (p);
}
// There can be several configurations with the same prefix and different platform but which build the same projects.
// If all configurations with the same prefix are identical, all of them can be reduced into a single configuration
// with no platform name. This loop detects such configurations
var notReducibleConfigurations = new HashSet<string> ();
foreach (var p in partitions) {
var groupedConfigs = p.SolutionConfigurations.GroupBy (sc => {
string name, plat;
ItemConfiguration.ParseConfigurationId (sc, out name, out plat);
return name;
}).ToArray ();
foreach (var confGroup in groupedConfigs) {
var configs = confGroup.ToArray ();
var baseConf = sol.Configurations[configs[0]];
if (configs.Skip (1).All (c => ConfigurationEquals (sol, baseConf, sol.Configurations[c])))
p.ReducedConfigurations.Add (confGroup.Key);
else
notReducibleConfigurations.Add (confGroup.Key);
}
}
// To really be able to use reduced configuration names, all partitions must have that reduced configuration
// Find the configurations that have been reduced in all partitions
reducedConfigurations = new HashSet<string> (partitions.SelectMany (p => p.ReducedConfigurations));
reducedConfigurations.ExceptWith (notReducibleConfigurations);
// Final merge of configurations
var result = new HashSet<string> ();
foreach (var p in partitions)
result.UnionWith (p.SolutionConfigurations);
// Replace reduced configurations
foreach (var reducedConf in reducedConfigurations) {
result.RemoveWhere (c => {
string name, plat;
ItemConfiguration.ParseConfigurationId (c, out name, out plat);
return name == reducedConf;
});
result.Add (reducedConf);
}
currentTargetPartitions = partitions;
currentSolutionConfigurations.AddRange (result);
currentSolutionConfigurations.Sort ();
}
/// <summary>
/// Load configuration information for a solution
/// </summary>
public void Load(Solution sol, SolutionItem project, SolutionItemRunConfiguration runConfig)
{
currentSolutionConfigurations.Clear();
currentTargetPartitions.Clear();
reducedConfigurations.Clear();
if (sol == null)
{
return;
}
// Create a set of configuration partitions. Each partition will contain configurations
// which are implicitly selected when selecting an execution target. For example, in
// an iOS project we would have two partitions:
// 1) Debug|IPhoneSimulator, Release|IPhoneSimulator
// targets: iPhone, iPad
// 2) Debug|IPhone, Release|IPhone
// targets: device
List <TargetPartition> partitions = new List <TargetPartition> ();
if (project != null)
{
foreach (var conf in project.Configurations)
{
var targets = project.GetExecutionTargets(conf.Selector, runConfig);
if (!targets.Any())
{
targets = new ExecutionTarget[] { dummyExecutionTarget };
}
var parts = partitions.Where(p => targets.Any(p.Targets.Contains)).ToArray();
if (parts.Length == 0)
{
// Create a new partition for this configuration
var p = new TargetPartition();
p.Configurations.Add(conf.Id);
p.Targets.UnionWith(targets);
partitions.Add(p);
}
else if (parts.Length == 1)
{
// Register the configuration into an existing partition
parts[0].Configurations.Add(conf.Id);
parts[0].Targets.UnionWith(targets);
}
else
{
// The partitions have to be merged into a single one
for (int n = 1; n < parts.Length; n++)
{
parts[0].Configurations.UnionWith(parts[n].Configurations);
parts[0].Targets.UnionWith(parts[n].Targets);
partitions.Remove(parts[n]);
}
}
}
// The startup project configuration partitions are used to create solution configuration partitions
foreach (var solConf in sol.Configurations)
{
var pconf = solConf.GetEntryForItem(project);
if (pconf != null && pconf.Build)
{
var part = partitions.FirstOrDefault(p => p.Configurations.Contains(pconf.ItemConfiguration));
if (part != null)
{
part.SolutionConfigurations.Add(solConf.Id);
continue;
}
}
// The solution configuration is not bound to the startup project
// Add it to all partitions so that it can still take part of
// the solution configuration simplification process
foreach (var p in partitions)
{
p.SolutionConfigurations.Add(solConf.Id);
}
}
}
if (partitions.Count == 0)
{
// There is no startup project, just use all solution configurations in this case
var p = new TargetPartition();
p.SolutionConfigurations.AddRange(sol.GetConfigurations());
partitions.Add(p);
}
// There can be several configurations with the same prefix and different platform but which build the same projects.
// If all configurations with the same prefix are identical, all of them can be reduced into a single configuration
// with no platform name. This loop detects such configurations
var notReducibleConfigurations = new HashSet <string> ();
foreach (var p in partitions)
{
var groupedConfigs = p.SolutionConfigurations.GroupBy(sc => {
string name, plat;
ItemConfiguration.ParseConfigurationId(sc, out name, out plat);
return(name);
}).ToArray();
foreach (var confGroup in groupedConfigs)
{
var configs = confGroup.ToArray();
var baseConf = sol.Configurations[configs[0]];
if (configs.Skip(1).All(c => ConfigurationEquals(sol, baseConf, sol.Configurations[c])))
{
p.ReducedConfigurations.Add(confGroup.Key);
}
else
{
notReducibleConfigurations.Add(confGroup.Key);
}
}
}
// To really be able to use reduced configuration names, all partitions must have that reduced configuration
// Find the configurations that have been reduced in all partitions
reducedConfigurations = new HashSet <string> (partitions.SelectMany(p => p.ReducedConfigurations));
reducedConfigurations.ExceptWith(notReducibleConfigurations);
// Final merge of configurations
var result = new HashSet <string> ();
foreach (var p in partitions)
{
result.UnionWith(p.SolutionConfigurations);
}
// Replace reduced configurations
foreach (var reducedConf in reducedConfigurations)
{
result.RemoveWhere(c => {
string name, plat;
ItemConfiguration.ParseConfigurationId(c, out name, out plat);
return(name == reducedConf);
});
result.Add(reducedConf);
}
currentTargetPartitions = partitions;
currentSolutionConfigurations.AddRange(result);
currentSolutionConfigurations.Sort();
}
public static void GenerateExecutionModeCommands(SolutionItem project, CanExecuteDelegate runCheckDelegate, CommandArrayInfo info)
{
CommandExecutionContext ctx = new CommandExecutionContext(project, runCheckDelegate);
bool supportsParameterization = false;
foreach (List <IExecutionMode> modes in GetExecutionModeCommands(ctx, false, true))
{
foreach (IExecutionMode mode in modes)
{
CommandInfo ci = info.Add(mode.Name, new CommandItem(ctx, mode));
if ((mode.ExecutionHandler is ParameterizedExecutionHandler) || ((mode is CustomExecutionMode) && ((CustomExecutionMode)mode).PromptForParameters))
{
// It will prompt parameters, so we need command to end with '..'.
// However, some commands may end with '...' already and we don't want to break
// already-translated strings by altering them
if (!ci.Text.EndsWith("..."))
{
ci.Text += "...";
}
supportsParameterization = true;
}
else
{
// The parameters window will be shown if ctrl is pressed
ci.Description = GettextCatalog.GetString("Run With: {0}", ci.Text);
if (SupportsParameterization(mode, ctx))
{
ci.Description += " - " + GettextCatalog.GetString("Hold Control key to display the execution parameters dialog.");
supportsParameterization = true;
}
}
}
if (info.Count > 0)
{
info.AddSeparator();
}
}
var targets = new List <ExecutionTarget> ();
if (project != null)
{
FlattenExecutionTargets(targets, project.GetExecutionTargets(IdeApp.Workspace.ActiveConfiguration));
}
if (targets.Count > 1)
{
foreach (var t in targets)
{
var h = new TargetedExecutionHandler(Runtime.ProcessService.DefaultExecutionHandler, t);
CommandInfo ci = info.Add(t.FullName, new CommandItem(ctx, new ExecutionMode(t.Id, t.FullName, h)));
ci.Description = GettextCatalog.GetString("Run With: {0}", ci.Text);
}
info.AddSeparator();
}
if (supportsParameterization)
{
info.AddSeparator();
info.Add(GettextCatalog.GetString("Edit Custom Modes..."), new CommandItem(ctx, null));
}
}
public static void GenerateExecutionModeCommands (SolutionItem project, CanExecuteDelegate runCheckDelegate, CommandArrayInfo info)
{
CommandExecutionContext ctx = new CommandExecutionContext (project, runCheckDelegate);
bool supportsParameterization = false;
foreach (List<IExecutionMode> modes in GetExecutionModeCommands (ctx, false, true)) {
foreach (IExecutionMode mode in modes) {
CommandInfo ci = info.Add (mode.Name, new CommandItem (ctx, mode));
if ((mode.ExecutionHandler is ParameterizedExecutionHandler) || ((mode is CustomExecutionMode) && ((CustomExecutionMode)mode).PromptForParameters)) {
// It will prompt parameters, so we need command to end with '..'.
// However, some commands may end with '...' already and we don't want to break
// already-translated strings by altering them
if (!ci.Text.EndsWith ("..."))
ci.Text += "...";
supportsParameterization = true;
} else {
// The parameters window will be shown if ctrl is pressed
ci.Description = GettextCatalog.GetString ("Run With: {0}", ci.Text);
if (SupportsParameterization (mode, ctx)) {
ci.Description += " - " + GettextCatalog.GetString ("Hold Control key to display the execution parameters dialog.");
supportsParameterization = true;
}
}
}
if (info.Count > 0)
info.AddSeparator ();
}
var targets = new List<ExecutionTarget> ();
if (project != null)
FlattenExecutionTargets (targets, project.GetExecutionTargets (IdeApp.Workspace.ActiveConfiguration));
if (targets.Count > 1) {
foreach (var t in targets) {
var h = new TargetedExecutionHandler (Runtime.ProcessService.DefaultExecutionHandler, t);
CommandInfo ci = info.Add (t.FullName, new CommandItem (ctx, new ExecutionMode (t.Id, t.FullName, h)));
ci.Description = GettextCatalog.GetString ("Run With: {0}", ci.Text);
}
info.AddSeparator ();
}
if (supportsParameterization) {
info.AddSeparator ();
info.Add (GettextCatalog.GetString ("Edit Custom Modes..."), new CommandItem (ctx, null));
}
}
