static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.Model model = null;
SolidEdgePart.RevolvedProtrusions revolvedProtrusions = null;
SolidEdgePart.RevolvedProtrusion revolvedProtrusion = null;
SolidEdgeFramework.SelectSet selectSet = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new PartDocument.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Call helper method to create the actual geometry.
model = PartHelper.CreateFiniteRevolvedProtrusion(partDocument);
// Get a reference to the RevolvedProtrusions collection.
revolvedProtrusions = model.RevolvedProtrusions;
// Get a reference to the new RevolvedProtrusion.
revolvedProtrusion = revolvedProtrusions.Item(1);
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new RevolvedProtrusion to ActiveSelectSet.
selectSet.Add(revolvedProtrusion);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgeFrameworkSupport.Lines2d lines2d = null;
SolidEdgeFrameworkSupport.Line2d axis = null;
SolidEdgeFrameworkSupport.Arcs2d arcs2d = null;
SolidEdgeFrameworkSupport.Relations2d relations2d = null;
SolidEdgePart.RefAxis refaxis = null;
Array aProfiles = null;
SolidEdgeGeometry.Edges edges = null;
SolidEdgeGeometry.Circle circle = null;
SolidEdgePart.RevolvedProtrusions revolvedProtrusions = null;
SolidEdgePart.RevolvedProtrusion revolvedProtrusion = null;
Array center = null;
SolidEdgePart.Rounds rounds = null;
try
{
Console.WriteLine("Registering OleMessageFilter.");
// Register with OLE to handle concurrency issues on the current thread.
OleMessageFilter.Register();
Console.WriteLine("Connecting to Solid Edge.");
// Connect to or start Solid Edge.
application = SolidEdgeUtils.Connect(true);
// Make sure user can see the GUI.
application.Visible = true;
// Bring Solid Edge to the foreground.
application.Activate();
// Get a reference to the Documents collection.
documents = application.Documents;
Console.WriteLine("Creating a new part document.");
// Create a new PartDocument.
partDocument = (SolidEdgePart.PartDocument)
documents.Add("SolidEdge.PartDocument");
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
Console.WriteLine("Drawing part.");
// Get a reference to the models collection.
models = (SolidEdgePart.Models)partDocument.Models;
// D1 to FA are parameters in a form, introduced by the user.
double D1 = 0.020;
double D2 = 0.026;
double D3 = 0.003;
double D4 = 0.014;
double L1 = 0.040;
double L2 = 0.030;
double L3 = 0.005;
double FA = 0.0005; // round
// Get a reference to the ref planes collection.
refPlanes = partDocument.RefPlanes;
// Front (xz).
refPlane = refPlanes.Item(3);
// Get a reference to the profile sets collection.
profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;
// Create a new profile set.
profileSet = profileSets.Add();
// Get a reference to the profiles collection.
profiles = profileSet.Profiles;
// Create a new profile.
profile = profiles.Add(refPlane);
// Get a reference to the profile lines2d collection.
lines2d = profile.Lines2d;
// Get a reference to the profile arcs2d collection.
arcs2d = profile.Arcs2d;
double H = L1 - L2;
double y = L1 - L3 - (D4 - D3) / (2 * Math.Tan((118 / 2) * (Math.PI / 180)));
lines2d.AddBy2Points(D3 / 2, 0, D2 / 2, 0); // Line1
lines2d.AddBy2Points(D2 / 2, 0, D2 / 2, H); // Line2
lines2d.AddBy2Points(D2 / 2, H, D1 / 2, H); // Line3
lines2d.AddBy2Points(D1 / 2, H, D1 / 2, L1); // Line4
lines2d.AddBy2Points(D1 / 2, L1, D4 / 2, L1); // Line5
lines2d.AddBy2Points(D4 / 2, L1, D4 / 2, L1 - L3); // Line6
lines2d.AddBy2Points(D4 / 2, L1 - L3, D3 / 2, y); // Line7
lines2d.AddBy2Points(D3 / 2, y, D3 / 2, 0); // Line8
axis = lines2d.AddBy2Points(0, 0, 0, L1);
profile.ToggleConstruction(axis);
// relations
relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d;
relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(5), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(6), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(7), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
relations2d.AddKeypoint(lines2d.Item(8), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart, true);
refaxis = (SolidEdgePart.RefAxis)profile.SetAxisOfRevolution(axis);
// Close the profile.
int status = profile.End(SolidEdgePart.ProfileValidationType.igProfileRefAxisRequired);
profile.Visible = false;
// Create a new array of profile objects.
aProfiles = Array.CreateInstance(typeof(SolidEdgePart.Profile), 1);
aProfiles.SetValue(profile, 0);
Console.WriteLine("Creating finite revolved protrusion.");
// add Finite Revolved Protrusion.
model = models.AddFiniteRevolvedProtrusion(1, ref aProfiles, refaxis, SolidEdgePart.FeaturePropertyConstants.igRight, 2 * Math.PI, null, null);
Console.WriteLine("Creating adding rounds.");
SolidEdgeGeometry.Edge[] arrEdges = { null };
double[] arrRadii = { FA };
revolvedProtrusions = model.RevolvedProtrusions;
revolvedProtrusion = revolvedProtrusions.Item(1);
edges = (SolidEdgeGeometry.Edges)revolvedProtrusion.Edges[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll];
foreach (SolidEdgeGeometry.Edge edge in edges)
{
circle = (SolidEdgeGeometry.Circle)edge.Geometry;
if (circle.Radius == D2 / 2)
{
center = Array.CreateInstance(typeof(double), 3);
circle.GetCenterPoint(ref center);
if ((double)center.GetValue(0) == 0 && (double)center.GetValue(1) == 0 && (double)center.GetValue(2) == H)
{
arrEdges[0] = edge;
break;
}
}
}
rounds = model.Rounds;
object optArg = Type.Missing;
rounds.Add(1, arrEdges, arrRadii, optArg, optArg, optArg, optArg);
Console.WriteLine("Switching to ISO view.");
// Switch to ISO view.
application.StartCommand((SolidEdgeFramework.SolidEdgeCommandConstants)SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
#if DEBUG
System.Diagnostics.Debugger.Break();
#endif
Console.WriteLine(ex.Message);
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.Model model = null;
SolidEdgePart.RevolvedProtrusions revolvedProtrusions = null;
SolidEdgePart.RevolvedProtrusion revolvedProtrusion = null;
SolidEdgeGeometry.Edges edges = null;
SolidEdgePart.Rounds rounds = null;
SolidEdgePart.Round round = null;
SolidEdgeFramework.SelectSet selectSet = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new PartDocument.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Call helper method to create the actual geometry.
model = PartHelper.CreateFiniteRevolvedProtrusion(partDocument);
// Get a reference to the RevolvedProtrusions collection.
revolvedProtrusions = model.RevolvedProtrusions;
// Get a reference to the new RevolvedProtrusion.
revolvedProtrusion = revolvedProtrusions.Item(1);
// Get a all Edges.
edges = (SolidEdgeGeometry.Edges)revolvedProtrusion.Edges[SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll];
List <SolidEdgeGeometry.Edge> edgeList = new List <SolidEdgeGeometry.Edge>();
List <double> radiusList = new List <double>();
// Build arrays.
foreach (SolidEdgeGeometry.Edge edge in edges)
{
edgeList.Add(edge);
radiusList.Add(0.002);
}
// Get a reference to the Rounds collection.
rounds = model.Rounds;
// Add single round with multiple Edges.
round = rounds.Add(edgeList.Count, edgeList.ToArray(), radiusList.ToArray());
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new Round to ActiveSelectSet.
selectSet.Add(round);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
