static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgeFrameworkSupport.Relations2d relations2d = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to the top RefPlane using extension method. refPlane = refPlanes.GetTopPlane(); // Get a reference to the ProfileSets collection. profileSets = partDocument.ProfileSets; // Add a new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Add a new Profile. profile = profiles.Add(refPlane); // Get a reference to the Relations2d collection. relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d; // Get a reference to the Lines2d collection. lines2d = profile.Lines2d; int sides = 8; double angle = 360 / sides; angle = (angle * Math.PI) / 180; double radius = .05; double lineLength = 2 * radius * (Math.Tan(angle) / 2); // x1, y1, x2, y2 double[] points = { 0.0, 0.0, 0.0, 0.0 }; double x = 0.0; double y = 0.0; points[2] = -((Math.Cos(angle / 2) * radius) - x); points[3] = -((lineLength / 2) - y); // Draw each line. for (int i = 0; i < sides; i++) { points[0] = points[2]; points[1] = points[3]; points[2] = points[0] + (Math.Sin(angle * i) * lineLength); points[3] = points[1] + (Math.Cos(angle * i) * lineLength); lines2d.AddBy2Points(points[0], points[1], points[2], points[3]); } // Create endpoint relationships. for (int i = 1; i <= lines2d.Count; i++) { if (i == lines2d.Count) { relations2d.AddKeypoint(lines2d.Item(i), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); } else { relations2d.AddKeypoint(lines2d.Item(i), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(i + 1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddEqual(lines2d.Item(i), lines2d.Item(i + 1)); } } // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add all lines to ActiveSelectSet. for (int i = 1; i <= lines2d.Count; i++) { selectSet.Add(lines2d.Item(i)); } // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgeFramework.SelectSet selectSet = null; Array features = Array.CreateInstance(typeof(object), 0); SolidEdgePart.ExtrudedProtrusion extrudedProtrustion = null; SolidEdgePart.UserDefinedPattern userDefinedPattern = null; SolidEdgePart.MirrorCopy mirrorCopy = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new sheet metal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = sheetMetalDocument.RefPlanes; // Get a reference to the top RefPlane using extension method. refPlane = refPlanes.GetTopPlane(); // Get path to Solid Edge training directory. Typically, 'C:\Program Files\Solid Edge XXX\Training'. var trainingDirectory = new System.IO.DirectoryInfo(SolidEdgeCommunity.SolidEdgeUtils.GetTrainingFolderPath()); // Build path to source part document. //string LibName = System.IO.Path.Combine(trainingDirectory.FullName, "Foot1.psm"); string LibName = System.IO.Path.Combine(trainingDirectory.FullName, "base.par"); // This method will take all features from block.par and place them into the new part document. sheetMetalDocument.PlaceFeatureLibrary(LibName, refPlane, 0.0, 0.0, 0.0, out features); // Optionally, iterate through all of the added features. foreach (var feature in features.OfType <object>()) { // Use helper class to get the feature type. var featureType = SolidEdgeCommunity.Runtime.InteropServices.ComObject.GetPropertyValue <SolidEdgePart.FeatureTypeConstants>(feature, "Type", (SolidEdgePart.FeatureTypeConstants) 0); // Depending on the feature type, we can cast the weakly typed feature to a strongly typed feature. switch (featureType) { case SolidEdgePart.FeatureTypeConstants.igExtrudedProtrusionFeatureObject: extrudedProtrustion = (SolidEdgePart.ExtrudedProtrusion)feature; break; case SolidEdgePart.FeatureTypeConstants.igUserDefinedPatternFeatureObject: userDefinedPattern = (SolidEdgePart.UserDefinedPattern)feature; break; case SolidEdgePart.FeatureTypeConstants.igMirrorCopyFeatureObject: mirrorCopy = (SolidEdgePart.MirrorCopy)feature; break; } } // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add all features to ActiveSelectSet. foreach (object feature in features) { selectSet.Add(feature); } // Switch to ISO view. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; List <SolidEdgePart.Profile> crossSectionProfiles = new List <SolidEdgePart.Profile>(); SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgeFrameworkSupport.Circles2d circles2d = null; SolidEdgeFrameworkSupport.Relations2d relations2d = null; List <object> OriginArray = new List <object>(); SolidEdgePart.LoftedCutouts loftedCutouts = null; SolidEdgePart.LoftedCutout loftedCutout = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); // Get a reference to the RefPlanes collection. refPlanes = partDocument.RefPlanes; // Get a reference to top RefPlane. refPlane = refPlanes.GetTopPlane(); // Get a reference to the ProfileSets collection. profileSets = partDocument.ProfileSets; // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; // Get a reference to the Models collection. models = partDocument.Models; #region Base Profile List <double[]> linesArray = new List <double[]>(); linesArray.Add(new double[] { 0, 0, 0.1, 0 }); linesArray.Add(new double[] { 0.1, 0, 0.1, 0.1 }); linesArray.Add(new double[] { 0.1, 0.1, 0, 0.1 }); linesArray.Add(new double[] { 0, 0.1, 0, 0 }); // Call helper method to create the actual geometry. model = PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.1); #endregion #region CrossSection Profile #1 refPlane = refPlanes.AddParallelByDistance( ParentPlane: refPlanes.GetRightPlane(), Distance: 0.1, NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide, Local: true); // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; crossSectionProfiles.Add(profiles.Add(refPlane)); OriginArray.Add(new double[] { 0.03, 0.03 }); lines2d = crossSectionProfiles[0].Lines2d; lines2d.AddBy2Points(0.03, 0.03, 0.07, 0.03); lines2d.AddBy2Points(0.07, 0.03, 0.07, 0.07); lines2d.AddBy2Points(0.07, 0.07, 0.03, 0.07); lines2d.AddBy2Points(0.03, 0.07, 0.03, 0.03); relations2d = (SolidEdgeFrameworkSupport.Relations2d)crossSectionProfiles[0].Relations2d; relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); crossSectionProfiles[0].End(SolidEdgePart.ProfileValidationType.igProfileClosed); crossSectionProfiles[0].Visible = false; #endregion #region CrossSection Profile #2 refPlane = refPlanes.AddParallelByDistance( ParentPlane: refPlanes.GetRightPlane(), Distance: 0.05, NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide, Local: true); // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; crossSectionProfiles.Add(profiles.Add(refPlane)); OriginArray.Add(new double[] { 0.0, 0.0 }); circles2d = crossSectionProfiles[1].Circles2d; circles2d.AddByCenterRadius(0.05, 0.05, 0.015); crossSectionProfiles[1].End(SolidEdgePart.ProfileValidationType.igProfileClosed); crossSectionProfiles[1].Visible = false; #endregion #region CrossSection Profile #3 refPlane = refPlanes.AddParallelByDistance( ParentPlane: refPlanes.GetRightPlane(), Distance: 0, NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide, Local: true); // Add new ProfileSet. profileSet = profileSets.Add(); // Get a reference to the Profiles collection. profiles = profileSet.Profiles; crossSectionProfiles.Add(profiles.Add(refPlane)); OriginArray.Add(new double[] { 0.03, 0.03 }); lines2d = crossSectionProfiles[2].Lines2d; lines2d.AddBy2Points(0.03, 0.03, 0.07, 0.03); lines2d.AddBy2Points(0.07, 0.03, 0.07, 0.07); lines2d.AddBy2Points(0.07, 0.07, 0.03, 0.07); lines2d.AddBy2Points(0.03, 0.07, 0.03, 0.03); relations2d = (SolidEdgeFrameworkSupport.Relations2d)crossSectionProfiles[2].Relations2d; relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); crossSectionProfiles[2].End(SolidEdgePart.ProfileValidationType.igProfileClosed); crossSectionProfiles[2].Visible = false; #endregion // Get a reference to the LoftedCutouts collection. loftedCutouts = model.LoftedCutouts; // Build cross section type array. List <object> crossSectionTypes = new List <object>(); crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); // Create the lofted cutout. loftedCutout = loftedCutouts.AddSimple(crossSectionProfiles.Count, crossSectionProfiles.ToArray(), crossSectionTypes.ToArray(), OriginArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igLeft, SolidEdgePart.FeaturePropertyConstants.igNone, SolidEdgePart.FeaturePropertyConstants.igNone); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new LoftedCutout to ActiveSelectSet. selectSet.Add(loftedCutout); // Switch to ISO view. application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.PartDocument partDocument = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.ProfileSets profileSets = null; SolidEdgePart.ProfileSet profileSet = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgeFrameworkSupport.Line2d line2d = null; SolidEdgeFrameworkSupport.Relations2d relations2d = null; SolidEdgeFrameworkSupport.Relation2d relation2d = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>(); int status = 0; SolidEdgePart.ExtrudedProtrusions extrudedProtrusions = null; SolidEdgePart.ExtrudedProtrusion extrudedProtrusion = null; SolidEdgeGeometry.Edges edges = null; List <object> edgeList = new List <object>(); SolidEdgeGeometry.Faces faces = null; SolidEdgePart.Chamfers chamfers = null; SolidEdgePart.Chamfer chamfer = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Bring Solid Edge to the foreground. application.Activate(); // Get a reference to the documents collection. documents = application.Documents; // Create a new part document. partDocument = documents.AddPartDocument(); // Always a good idea to give SE a chance to breathe. application.DoIdle(); refPlanes = partDocument.RefPlanes; refPlane = refPlanes.GetTopPlane(); profileSets = partDocument.ProfileSets; profileSet = profileSets.Add(); profiles = profileSet.Profiles; profile = profiles.Add(refPlane); profileList.Add(profile); lines2d = profile.Lines2d; line2d = lines2d.AddBy2Points(0, 0, 0.06, 0); line2d = lines2d.AddBy2Points(0.06, 0, 0.06, 0.06); line2d = lines2d.AddBy2Points(0.06, 0.06, 0, 0.06); line2d = lines2d.AddBy2Points(0, 0.06, 0, 0); relations2d = (SolidEdgeFrameworkSupport.Relations2d)profile.Relations2d; relation2d = relations2d.AddKeypoint( Object1: lines2d.Item(1), Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, Object2: lines2d.Item(2), Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relation2d = relations2d.AddKeypoint( Object1: lines2d.Item(2), Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, Object2: lines2d.Item(3), Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relation2d = relations2d.AddKeypoint( Object1: lines2d.Item(3), Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, Object2: lines2d.Item(4), Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); relation2d = relations2d.AddKeypoint( Object1: lines2d.Item(4), Index1: (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, Object2: lines2d.Item(1), Index2: (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart); // Make sure profile is closed. status = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed); if (status != 0) { throw new System.Exception("Profile not closed."); } models = partDocument.Models; model = models.AddFiniteExtrudedProtrusion( NumberOfProfiles: profileList.Count, ProfileArray: profileList.ToArray(), ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight, ExtrusionDistance: 0.02); profile.Visible = false; extrudedProtrusions = model.ExtrudedProtrusions; extrudedProtrusion = extrudedProtrusions.Item(1); //edges = (SolidEdgeGeometry.Edges)extrudedProtrusion.get_Edges( // SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll); //edgeList.Add(edges.Item(5)); //edgeList.Add(edges.Item(8)); faces = (SolidEdgeGeometry.Faces) extrudedProtrusion.get_Faces(SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll);// SolidEdgeGeometry.FeatureTopologyQueryTypeConstants.igQueryAll); SolidEdgeGeometry.Face face = (SolidEdgeGeometry.Face)faces.Item(1); edges = (SolidEdgeGeometry.Edges)face.Edges; edgeList.Add(edges.Item(1)); edgeList.Add(edges.Item(2)); chamfers = model.Chamfers; double setbackDistance = 0.005; chamfer = chamfers.AddEqualSetback( NumberOfEdgeSets: edgeList.Count, EdgeSetArray: edgeList.ToArray(), SetbackDistance: setbackDistance); // Switch to ISO view. //application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile1 = null; SolidEdgePart.Profile profile2 = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; List <object> crossSections = new List <object>(); List <object> crossSectionTypes = new List <object>(); List <object> origins = new List <object>(); List <object> originRefs = new List <object>(); double bendRadius = 0.001; double neutralFactor = 0.33; SolidEdgeFramework.SelectSet selectSet = null; SolidEdgePart.LoftedFlanges loftedFlanges = null; SolidEdgePart.LoftedFlange loftedFlange = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to Solid Edge, application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new sheetmetal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Get a reference to the Sketches collection. sketches = sheetMetalDocument.Sketches; // Get a reference to the RefPlanes collection. refPlanes = sheetMetalDocument.RefPlanes; // Get a reference to top RefPlane. refPlane = refPlanes.GetTopPlane(); // Create new sketch. sketch = sketches.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Create new profile. profile1 = profiles.Add(refPlanes.Item(1)); // Get a reference to the Lines2d collection. lines2d = profile1.Lines2d; // Multidimensional array double[,] points = new double[, ] { { 0.0, 0.0, 0.1, 0.2 }, { 0.1, 0.2, 0.3, 0.2 }, { 0.3, 0.2, 0.4, 0.0 } }; for (int i = 0; i <= points.GetUpperBound(0); i++) { lines2d.AddBy2Points(points[i, 0], points[i, 1], points[i, 2], points[i, 3]); } origins.Add(lines2d.Item(1)); // Create Reference Plane Parallel to "XY" Plane at 1Meter distance. refPlane = refPlanes.AddParallelByDistance( ParentPlane: refPlanes.Item(1), Distance: 1, NormalSide: SolidEdgePart.ReferenceElementConstants.igReverseNormalSide); // Create new sketch. sketch = sketches.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Create new profile. profile2 = profiles.Add(refPlane); // Get a reference to the Lines2d collection. lines2d = profile2.Lines2d; for (int i = 0; i <= points.GetUpperBound(0); i++) { lines2d.AddBy2Points(points[i, 0], points[i, 1], points[i, 2], points[i, 3]); } origins.Add(lines2d.Item(1)); crossSections.Add(profile1); crossSections.Add(profile2); crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection); originRefs.Add(SolidEdgePart.FeaturePropertyConstants.igStart); originRefs.Add(SolidEdgePart.FeaturePropertyConstants.igStart); // Get a reference to the Models collection. models = sheetMetalDocument.Models; // Create a new lofted flange. model = models.AddLoftedFlange(crossSections.Count, crossSections.ToArray(), crossSectionTypes.ToArray(), origins.ToArray(), originRefs.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, bendRadius, neutralFactor, SolidEdgePart.FeaturePropertyConstants.igNFType); // Get a reference to the LoftedFlanges collection. loftedFlanges = model.LoftedFlanges; // Get a reference to the new LoftedFlange. loftedFlange = loftedFlanges.Item(1); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new protrusion to ActiveSelectSet. selectSet.Add(loftedFlange); profile1.Visible = false; profile2.Visible = false; // Switch to ISO view. application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }
static void Main(string[] args) { SolidEdgeFramework.Application application = null; SolidEdgeFramework.Documents documents = null; SolidEdgePart.SheetMetalDocument sheetMetalDocument = null; SolidEdgePart.Models models = null; SolidEdgePart.Model model = null; SolidEdgePart.RefPlanes refPlanes = null; SolidEdgePart.RefPlane refPlane = null; SolidEdgePart.Sketchs sketches = null; SolidEdgePart.Sketch sketch = null; SolidEdgePart.Profiles profiles = null; SolidEdgePart.Profile profile = null; SolidEdgeFrameworkSupport.Lines2d lines2d = null; SolidEdgeFrameworkSupport.Line2d line2d = null; SolidEdgePart.Slots slots = null; SolidEdgePart.Slot slot = null; SolidEdgeFramework.SelectSet selectSet = null; try { // Register with OLE to handle concurrency issues on the current thread. SolidEdgeCommunity.OleMessageFilter.Register(); // Connect to or start Solid Edge. application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true); // Get a reference to the documents collection. documents = application.Documents; // Create a new sheetmetal document. sheetMetalDocument = documents.AddSheetMetalDocument(); // Invoke existing sample to create geometry. SheetMetalHelper.CreateBaseTab(sheetMetalDocument); // Get a reference to the Models collection. models = sheetMetalDocument.Models; // Get a reference to the 1st model. model = models.Item(1); // Get a reference to the RefPlanes collection. refPlanes = sheetMetalDocument.RefPlanes; refPlane = refPlanes.GetTopPlane(); // Get a reference to the Sketches collection. sketches = sheetMetalDocument.Sketches; // Create a new sketch. sketch = sketches.Add(); // Get a reference to the Profiles collection. profiles = sketch.Profiles; // Create a new profile. profile = profiles.Add(refPlane); // Get a reference to the Lines2d collection. lines2d = profile.Lines2d; // Add a new line. line2d = lines2d.AddBy2Points(-0.01, 0.0, -0.01, 0.01); // Get a reference to the Slots collection. slots = model.Slots; // Add a new slot. slot = slots.Add(profile, SolidEdgePart.FeaturePropertyConstants.igRegularSlot, SolidEdgePart.FeaturePropertyConstants.igFormedEnd, 0.01, 0.0, 0.0, SolidEdgePart.FeaturePropertyConstants.igFinite, SolidEdgePart.FeaturePropertyConstants.igRight, 0.0005, SolidEdgePart.KeyPointExtentConstants.igTangentNormal, null, SolidEdgePart.FeaturePropertyConstants.igNone, SolidEdgePart.FeaturePropertyConstants.igNone, 0.0, SolidEdgePart.KeyPointExtentConstants.igTangentNormal, null, null, SolidEdgePart.OffsetSideConstants.seOffsetNone, 0.0, null, SolidEdgePart.OffsetSideConstants.seOffsetNone, 0.0); // Get a reference to the ActiveSelectSet. selectSet = application.ActiveSelectSet; // Empty ActiveSelectSet. selectSet.RemoveAll(); // Add new Slot to ActiveSelectSet. selectSet.Add(slot); } catch (System.Exception ex) { Console.WriteLine(ex.Message); } finally { SolidEdgeCommunity.OleMessageFilter.Unregister(); } }