private void buttonDWGfromArray_Click(object sender, EventArgs e)
{
int error = 0;
// Config the Output Bus selected in pins 0 to 15 of Port selected
moduleDIO.busConfig(SD_DIO_Bus.DIO_OUTPUT_BUS0 + nChannel, nChannel, 0, 15);
//Config all pins of both ports as output
moduleDIO.IOdirectionConfig(-1 /*0XFFFFFFFFFFFFFFFF*/, SD_PinDirections.DIR_OUT);
// Erase all waveforms from module memory
moduleDIO.waveformFlush();
printToConsole("Module configuration successfull. Press any key to start the DWG.");
runPause();
//Load waveforms from Array with prestaler 1 (100MSPS) and infinite cycles
int[] points = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 };
error = moduleDIO.DWG(nChannel, SD_TriggerModes.AUTOTRIG, 0, 0, 1, SD_WaveformTypes.WAVE_DIGITAL, points);
if (error < 0)
{
printToConsole(SD_Error.getErrorMessage(error));
return;
}
printToConsole("Press any key to stop the DWG.");
runPause();
moduleDIO.DWGstop(nChannel);
printToConsole("Press any key to finish.");
runPause();
}
private void stopButton_Click(object sender, EventArgs e)
{
int error;
if ((error = this.HVI.stop()) < 0)
{
MessageBox.Show("Error", SD_Error.getErrorMessage(error), MessageBoxButtons.OK, MessageBoxIcon.Error);
}
}
private void triggerWrite_Click(object sender, EventArgs e)
{
int error;
if (this.module == null)
{
MessageBox.Show("Error", "No module owned.", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
else
{
if ((error = this.module.PXItriggerWrite((int)(this.registerNumber.Value), (int)(this.value2write.Value))) < 0)
{
MessageBox.Show("Error", SD_Error.getErrorMessage(error), MessageBoxButtons.OK, MessageBoxIcon.Error);
}
}
}
private void openButton_Click(object sender, EventArgs e)
{
int error;
if ((error = this.HVI.open(this.HVIpath.Text)) < 0)
{
MessageBox.Show("Error", SD_Error.getErrorMessage(error), MessageBoxButtons.OK, MessageBoxIcon.Error);
}
else
{
this.openButton.Enabled = false;
this.closeButton.Enabled = true;
this.moduleButton.Enabled = true;
this.startButton.Enabled = true;
this.stopButton.Enabled = true;
this.pauseButton.Enabled = true;
this.resumeButton.Enabled = true;
}
}
private void triggerRead_Click(object sender, EventArgs e)
{
int value;
if (this.module == null)
{
MessageBox.Show("Error", "No module owned.", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
else
{
value = this.module.PXItriggerRead((int)(this.registerNumber.Value));
if (value < 0)
{
MessageBox.Show("Error", SD_Error.getErrorMessage(value), MessageBoxButtons.OK, MessageBoxIcon.Error);
}
else
{
this.readTrigger.Text = value.ToString();
}
}
}
private void readButton_Click(object sender, EventArgs e)
{
int error, value;
if (this.module == null)
{
MessageBox.Show("Error", "No module owned.", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
else
{
value = this.module.readVariable((int)(this.registerNumber.Value), out error);
if (error < 0)
{
MessageBox.Show("Error", SD_Error.getErrorMessage(error), MessageBoxButtons.OK, MessageBoxIcon.Error);
}
else
{
this.readValue.Text = value.ToString();
}
}
}
private void buttonBuses_Click(object sender, EventArgs e)
{
int error, dataAux;
// Config the Output Bus selected in pins 0 to 15 of Port selected
moduleDIO.busConfig(SD_DIO_Bus.DIO_OUTPUT_BUS0 + nChannel, nChannel, 0, 15);
// Config the Input Bus selected in pins 0 to 15 of Port selected
moduleDIO.busConfig(SD_DIO_Bus.DIO_INPUT_BUS0 + nChannel, nChannel, 1, 15);
//Config all pins as output
moduleDIO.IOdirectionConfig(-1 /*0xFFFFFFFFFFFFFFFF*/, SD_PinDirections.DIR_OUT);
printToConsole("Module configuration successfull. Press any key to set the trigger.");
runPause();
dataAux = 32768;
while (dataAux > 0)
{
error = moduleDIO.busWrite(SD_DIO_Bus.DIO_OUTPUT_BUS0 + nChannel, dataAux);
if (error < 0)
{
return;
}
printToConsole("Write data in OutputBus 0\n");
dataAux = moduleDIO.busRead(SD_DIO_Bus.DIO_INPUT_BUS0 + nChannel, out error);
if (error < 0)
{
printToConsole(SD_Error.getErrorMessage(error));
return;
}
printToConsole("Read data in InputBus : " + dataAux.ToString());
runPause();
}
}
private void closeButton_Click(object sender, EventArgs e)
{
int error;
if ((error = this.HVI.close()) < 0)
{
MessageBox.Show("Error", SD_Error.getErrorMessage(error), MessageBoxButtons.OK, MessageBoxIcon.Error);
}
else
{
this.openButton.Enabled = true;
this.closeButton.Enabled = false;
this.startButton.Enabled = false;
this.stopButton.Enabled = false;
this.pauseButton.Enabled = false;
this.resumeButton.Enabled = false;
this.moduleButton.Enabled = false;
this.module = null;
this.readButton.Enabled = false;
this.writeButton.Enabled = false;
this.triggerRead.Enabled = false;
this.triggerWrite.Enabled = false;
}
}
private void buttonDAQwithBuffers_Click(object sender, EventArgs e)
{
ulong dataPrev = 0;
ulong[] dataBuffer = new ulong[16];
int totalPointsRead = 0;
int nPointsRead = 0;
int error = 0;
int i = 0;
// Config DAQ Buffers Pool with Callback
moduleTDC.DAQbufferPoolConfig(nChannel, dataBuffer, 1000);
// Add other buffer
dataBuffer = new ulong[16];
moduleTDC.DAQbufferAdd(nChannel, dataBuffer);
// Stop DAQ
moduleTDC.DAQstop(nChannel);
// Flush DAQ
moduleTDC.DAQflush(nChannel);
// Config DAQ with two cycles of 16 points
moduleTDC.DAQconfig(nChannel, 16, 2, 1, SD_TriggerModes.VIHVITRIG);
printToConsole("Module configuration successfull. Press any key to start the DAQ.");
runPause();
// Start DAQ
moduleTDC.DAQstart(nChannel);
printToConsole("DAQ started. Waiting for trigger for first cycles. Press any key to send a VI/HVI trigger.");
runPause();
// Send VI/HVI trigger
moduleTDC.DAQtrigger(nChannel);
// Waiting for 16 points (first cycle)
while (moduleTDC.DAQcounterRead(nChannel) < 16)
{
;
}
printToConsole("DAQ has acquired " + (moduleTDC.DAQcounterRead(nChannel)).ToString() + " points.");
runPause();
printToConsole("Waiting for another trigger for second cycles. Press any key to send a VI/HVI trigger.");
runPause();
// Send VI/HVI trigger
moduleTDC.DAQtrigger(nChannel);
// Waiting for 16 points (second cycle)
while (moduleTDC.DAQcounterRead(nChannel) < 32)
{
;
}
printToConsole("DAQ has acquired " + (moduleTDC.DAQcounterRead(nChannel)).ToString() + " points.");
runPause();
// Read data
while (totalPointsRead < 32)
{
dataBuffer = moduleTDC.DAQbufferGet(nChannel, out nPointsRead, out error);
printToConsole("Points Read : " + nPointsRead.ToString());
printToConsole("error : " + SD_Error.getErrorMessage(error));
printToConsole("Data Buffer: ");
for (i = 0; i < nPointsRead; i++)
{
printToConsole("\tData[" + (i + totalPointsRead).ToString() + "] : " + dataBuffer[i].ToString() + " ps : difference = " + (dataBuffer[i] - dataPrev).ToString() + " ps\n");
dataPrev = dataBuffer[i];
}
totalPointsRead = totalPointsRead + nPointsRead;
printToConsole("Total Points read : " + totalPointsRead.ToString());
}
printToConsole("Press any key to finish.");
runPause();
// Free all buffers
moduleTDC.DAQbufferPoolRelease(nChannel);
while (moduleTDC.DAQbufferRemove(nChannel) != null)
{
;
}
}