private bool IsRuleSetToRangeNone(RoutingPreferenceManager routingPreferenceManager, RoutingPreferenceRuleGroupType groupType, int index)
{
if (routingPreferenceManager.GetNumberOfRules(groupType) == 0)
{
return(false);
}
RoutingPreferenceRule rule = routingPreferenceManager.GetRule(groupType, index);
if (rule.NumberOfCriteria == 0)
{
return(false);
}
PrimarySizeCriterion psc = rule.GetCriterion(0) as PrimarySizeCriterion;
if (psc.IsEqual(PrimarySizeCriterion.None()))
{
return(true);
}
else
{
return(false);
}
}
/// <summary>
/// Check to see if the routing preferences specify a preferred junction type but do not have any
/// rules with valid fittings for that type (e.g, "Tee" is the preferred junction type, but only "Tap" fittings
/// are specified in junction rules.)
/// </summary>
/// <param name="routingPreferenceManager"></param>
/// <returns></returns>
private bool IsPreferredJunctionTypeValid(RoutingPreferenceManager routingPreferenceManager)
{
PreferredJunctionType preferredJunctionType = routingPreferenceManager.PreferredJunctionType;
if (routingPreferenceManager.GetNumberOfRules(RoutingPreferenceRuleGroupType.Junctions) == 0)
{
return(false);
}
bool teeDefined = false;
bool tapDefined = false;
for (int index = 0; index != routingPreferenceManager.GetNumberOfRules(RoutingPreferenceRuleGroupType.Junctions); ++index)
{
RoutingPreferenceRule rule = routingPreferenceManager.GetRule(RoutingPreferenceRuleGroupType.Junctions, index);
if (rule.MEPPartId == ElementId.InvalidElementId)
{
continue;
}
FamilySymbol familySymbol = this.m_document.GetElement(rule.MEPPartId) as FamilySymbol;
Parameter paramPartType = familySymbol.Family.get_Parameter(BuiltInParameter.FAMILY_CONTENT_PART_TYPE);
if (paramPartType == null)
{
throw new Exception("Null partType parameter.");
}
PartType partType = (PartType)paramPartType.AsInteger();
if ((partType == PartType.Tee))
{
teeDefined = true;
}
else if (
(partType == PartType.TapAdjustable) ||
(partType == PartType.TapPerpendicular) ||
(partType == PartType.SpudPerpendicular) ||
(partType == PartType.SpudAdjustable)
)
{
tapDefined = true;
}
}
if ((preferredJunctionType == PreferredJunctionType.Tap) && !tapDefined)
{
return(false);
}
if ((preferredJunctionType == PreferredJunctionType.Tee) && !teeDefined)
{
return(false);
}
return(true);
}
/// <summary>
/// Create Xml from a RoutingPreferenceManager
/// </summary>
/// <param name="routingPreferenceManager"></param>
/// <returns></returns>
private XElement CreateXmlFromRoutingPreferenceManager(RoutingPreferenceManager routingPreferenceManager)
{
XElement xRoutingPreferenceManager = new XElement(XName.Get("RoutingPreferenceManager"));
xRoutingPreferenceManager.Add(new XAttribute(XName.Get("pipeTypeName"), GetPipeTypeNameById(routingPreferenceManager.OwnerId)));
xRoutingPreferenceManager.Add(new XAttribute(XName.Get("preferredJunctionType"), routingPreferenceManager.PreferredJunctionType.ToString()));
for (int indexCrosses = 0; indexCrosses != routingPreferenceManager.GetNumberOfRules(RoutingPreferenceRuleGroupType.Crosses); indexCrosses++)
{
xRoutingPreferenceManager.Add(createXmlFromRoutingPreferenceRule(routingPreferenceManager.GetRule(RoutingPreferenceRuleGroupType.Crosses, indexCrosses), RoutingPreferenceRuleGroupType.Crosses));
}
for (int indexElbows = 0; indexElbows != routingPreferenceManager.GetNumberOfRules(RoutingPreferenceRuleGroupType.Elbows); indexElbows++)
{
xRoutingPreferenceManager.Add(createXmlFromRoutingPreferenceRule(routingPreferenceManager.GetRule(RoutingPreferenceRuleGroupType.Elbows, indexElbows), RoutingPreferenceRuleGroupType.Elbows));
}
for (int indexSegments = 0; indexSegments != routingPreferenceManager.GetNumberOfRules(RoutingPreferenceRuleGroupType.Segments); indexSegments++)
{
xRoutingPreferenceManager.Add(createXmlFromRoutingPreferenceRule(routingPreferenceManager.GetRule(RoutingPreferenceRuleGroupType.Segments, indexSegments), RoutingPreferenceRuleGroupType.Segments));
}
for (int indexJunctions = 0; indexJunctions != routingPreferenceManager.GetNumberOfRules(RoutingPreferenceRuleGroupType.Junctions); indexJunctions++)
{
xRoutingPreferenceManager.Add(createXmlFromRoutingPreferenceRule(routingPreferenceManager.GetRule(RoutingPreferenceRuleGroupType.Junctions, indexJunctions), RoutingPreferenceRuleGroupType.Junctions));
}
for (int indexTransitions = 0; indexTransitions != routingPreferenceManager.GetNumberOfRules(RoutingPreferenceRuleGroupType.Transitions); indexTransitions++)
{
xRoutingPreferenceManager.Add(createXmlFromRoutingPreferenceRule(routingPreferenceManager.GetRule(RoutingPreferenceRuleGroupType.Transitions, indexTransitions), RoutingPreferenceRuleGroupType.Transitions));
}
for (int indexUnions = 0; indexUnions != routingPreferenceManager.GetNumberOfRules(RoutingPreferenceRuleGroupType.Unions); indexUnions++)
{
xRoutingPreferenceManager.Add(createXmlFromRoutingPreferenceRule(routingPreferenceManager.GetRule(RoutingPreferenceRuleGroupType.Unions, indexUnions), RoutingPreferenceRuleGroupType.Unions));
}
for (int indexMechanicalJoints = 0; indexMechanicalJoints != routingPreferenceManager.GetNumberOfRules(RoutingPreferenceRuleGroupType.MechanicalJoints); indexMechanicalJoints++)
{
xRoutingPreferenceManager.Add(createXmlFromRoutingPreferenceRule(routingPreferenceManager.GetRule(RoutingPreferenceRuleGroupType.MechanicalJoints, indexMechanicalJoints), RoutingPreferenceRuleGroupType.MechanicalJoints));
}
return(xRoutingPreferenceManager);
}
/// <summary>
/// Checks to see if any segments in the routing preference manager have sizes that cannot be fitted with fittings defined in a rule group type, such as "Elbow."
/// For example, if a segment rule defines a segment be used from sizes 2" to 12", and there are three elbows rules defined to be used from ranges
/// 2"-4", 4"-7", and 9"-14", this method will return warning information specifying the sizes (8", 8.5", etc...) not covered by elbow fittings.
/// </summary>
private XElement GetSegmentRangeNotCoveredWarning(RoutingPreferenceManager routingPreferenceManager, RoutingPreferenceRuleGroupType groupType)
{
for (int index = 0; index != routingPreferenceManager.GetNumberOfRules(RoutingPreferenceRuleGroupType.Segments); ++index)
{
RoutingPreferenceRule rule = routingPreferenceManager.GetRule(RoutingPreferenceRuleGroupType.Segments, index);
if (rule.MEPPartId == ElementId.InvalidElementId)
{
continue;
}
if (rule.NumberOfCriteria == 0) //double check all/none
{
continue;
}
PrimarySizeCriterion psc = rule.GetCriterion(0) as PrimarySizeCriterion;
PipeSegment segment = m_document.GetElement(rule.MEPPartId) as PipeSegment;
List <double> sizesNotCovered = new List <double>();
bool isCovered = CheckSegmentForValidCoverage(routingPreferenceManager, psc.MinimumSize, psc.MaximumSize, rule.MEPPartId, groupType, sizesNotCovered);
if (!isCovered)
{
XElement xSegmentNotCovered = new XElement(XName.Get("SegmentRangeNotCovered"));
xSegmentNotCovered.Add(new XAttribute(XName.Get("name"), segment.Name));
StringBuilder sBuilder = new StringBuilder();
foreach (double size in sizesNotCovered)
{
double roundedSize = Convert.ConvertValueDocumentUnits(size, m_document);
sBuilder.Append(roundedSize.ToString() + " ");
}
sBuilder.Remove(sBuilder.Length - 1, 1);
xSegmentNotCovered.Add(new XAttribute(XName.Get("sizes"), sBuilder.ToString()));
xSegmentNotCovered.Add(new XAttribute(XName.Get("unit"), m_document.GetUnits().GetFormatOptions(UnitType.UT_PipeSize).DisplayUnits.ToString()));
xSegmentNotCovered.Add(new XAttribute(XName.Get("groupType"), groupType.ToString()));
return(xSegmentNotCovered);
}
}
return(null);
}
/// <summary>
/// Get all segments from a the currently selected pipe type, get each size from each segment,
/// collect, sort, and return.
/// </summary>
public static List <double> GetAvailableSegmentSizes(RoutingPreferenceManager routingPreferenceManager, Autodesk.Revit.DB.Document document)
{
System.Collections.Generic.HashSet <double> sizes = new HashSet <double>();
int segmentCount = routingPreferenceManager.GetNumberOfRules(RoutingPreferenceRuleGroupType.Segments);
for (int index = 0; index != segmentCount; ++index)
{
RoutingPreferenceRule segmentRule = routingPreferenceManager.GetRule(RoutingPreferenceRuleGroupType.Segments, index);
Segment segment = document.GetElement(segmentRule.MEPPartId) as Segment;
foreach (MEPSize size in segment.GetSizes())
{
sizes.Add(size.NominalDiameter);
}
}
List <double> sizesSorted = sizes.ToList();
sizesSorted.Sort();
return(sizesSorted);
}