/// <summary>
/// Get the pop3 server information from
/// the configuration file, the host and
/// port of the pop3 server is located in
/// the default section, this data is used
/// to connect to the pop3 server.
/// </summary>
private void GetPop3ServerHost()
{
try
{
// Create a new connection adapter.
_connection = new Pop3ConnectionAdapter();
// If no host name set then
// use the defualt values.
if (String.IsNullOrEmpty(_pop3ServerName))
{
// Create a new default host type
// an load the values from the configuration
// file into the default host type.
ProxyPop3ServerDefaultHost defaultHost =
(ProxyPop3ServerDefaultHost)System.Configuration.ConfigurationManager.GetSection(
"ProxyPop3ServerGroup/ProxyPop3ServerDefaultHost");
// If the port is greater than zero then
// assign the port number.
if (defaultHost.HostSection.PortAttribute > 0)
{
_connection.Port = defaultHost.HostSection.PortAttribute;
}
// Get the pop3 server.
_connection.Server = defaultHost.HostSection.HostAttribute;
}
else
{
// Create a new host type
// an load the values from the configuration
// file into the host type.
ProxyPop3ServerHosts hosts =
(ProxyPop3ServerHosts)System.Configuration.ConfigurationManager.GetSection(
"ProxyPop3ServerGroup/ProxyPop3ServerHosts");
// If the port is greater than zero then
// assign the port number.
if (hosts.HostSection[_pop3ServerName].PortAttribute > 0)
{
_connection.Port = hosts.HostSection[_pop3ServerName].PortAttribute;
}
// Get the pop3 server.
_connection.Server = hosts.HostSection[_pop3ServerName].HostAttribute;
}
}
catch (Exception e)
{
// Detect a thread abort exception.
if (e is ThreadAbortException)
{
Thread.ResetAbort();
}
base.Write("Pop3SslProxyServer", "GetListeningPort", e.Message,
246, WriteTo.EventLog, LogType.Error);
}
}
/// <summary>
/// Default constructor.
/// </summary>
/// <param name="tcpClient">The tcp client channel connection from server to client.</param>
/// <param name="connection">The connection adapter used to connect to the server.</param>
public Pop3TlsProxyConnection(TcpClient tcpClient, Pop3ConnectionAdapter connection)
{
try
{
// The tcp client to server channel.
// Assign the network stream from the client
// channel stream.
_tcpClient = tcpClient;
_connection = connection;
// Create a new state object.
ServerSocketState state = new ServerSocketState();
state.TcpClient = _tcpClient;
// This starts the asynchronous read thread.
// The data will be saved into readBuffer.
_tcpClient.Client.BeginReceive(_readBuffer, 0, READ_BUFFER_SIZE,
SocketFlags.None, new AsyncCallback(InitializingSSLDataReceiver), state);
// Send a welcome message to the client.
SendNonSSLClientCommand("* OK Welcome to Secure Pop3 Proxy Server - Authorized Accounts Only");
}
catch (Exception e)
{
// Detect a thread abort exception.
if (e is ThreadAbortException)
{
Thread.ResetAbort();
}
base.Write("Pop3TlsProxyConnection", "Constructor", e.Message,
65, WriteTo.EventLog, LogType.Error);
}
}
/// <summary>
/// General message constructor.
/// </summary>
/// <param name="contentType">The content type.</param>
/// <param name="data">The body data.</param>
/// <param name="writeAttachmentToFile">Write to file.</param>
/// <param name="connection">The connection object.</param>
public MessageAttachment(string contentType, string data,
bool writeAttachmentToFile, Pop3ConnectionAdapter connection)
{
_data = data;
_connection = connection;
_contentType = contentType;
_writeAttachmentToFile = writeAttachmentToFile;
}
/// <summary>
/// Attachment message constructor.
/// </summary>
/// <param name="contentType">Content type.</param>
/// <param name="name">The attachment name.</param>
/// <param name="filename">The attachment file name.</param>
/// <param name="contentTransferEncoding">The encoding type.</param>
/// <param name="contentDescription">The description.</param>
/// <param name="contentDisposition">The content disposition.</param>
/// <param name="data">The attachment data.</param>
/// <param name="writeAttachmentToFile">Write to file.</param>
/// <param name="connection">The connection object.</param>
public MessageAttachment(string contentType, string name, string filename,
string contentTransferEncoding, string contentDescription,
string contentDisposition, string data, bool writeAttachmentToFile,
Pop3ConnectionAdapter connection)
{
_data = data;
_name = name;
_filename = filename;
_connection = connection;
_contentType = contentType;
_contentDescription = contentDescription;
_contentDisposition = contentDisposition;
_writeAttachmentToFile = writeAttachmentToFile;
_contentTransferEncoding = contentTransferEncoding;
// Decode the attachment data.
DecodeData(writeAttachmentToFile);
}
/// <summary>
/// Default constructor.
/// </summary>
/// <param name="tcpClient">The tcp client channel connection from server to client.</param>
/// <param name="connection">The connection adapter used to connect to the server.</param>
public Pop3SslProxyConnection(TcpClient tcpClient, Pop3ConnectionAdapter connection)
{
try
{
// The tcp client to server channel.
// Assign the network stream from the client
// channel stream.
_tcpClient = tcpClient;
_connection = connection;
_sslStream = new SslStream(tcpClient.GetStream());
// Certificate file containing a public key
// and private key for secure data transfer.
X509Certificate2 certificate = GetServerCredentials();
// Load the certificate into the
// secure stream used for secure communication.
_sslStream.AuthenticateAsServer(certificate, false, SslProtocols.Ssl3, false);
// Create a new state object.
ServerSocketState state = new ServerSocketState();
state.SslStream = _sslStream;
// This starts the asynchronous read thread.
// The data will be saved into readBuffer.
_sslStream.BeginRead(_readBuffer, 0, READ_BUFFER_SIZE,
new AsyncCallback(DataReceiver), state);
// Create a new pop3 client and
// attempt to make a connection
// get the response from the server.
bool ret = GetSocket();
// If return false.
if (!ret)
{
// Write an error response back to
// the pop3 client.
_sslStream.Write(Encoding.ASCII.GetBytes("-ERR" + "\r\n"));
}
else
{
// Create a new state object.
ServerSocketState stateSocket = new ServerSocketState();
stateSocket.EmailMessage = new StringBuilder();
stateSocket.SslStream = _sslStream;
stateSocket.Socket = _socket;
// Start receiving data asynchrounusly.
_socket.BeginReceive(_receiveBuffer, 0, READ_BUFFER_SIZE,
SocketFlags.None, new AsyncCallback(ReceiveCallback), stateSocket);
}
}
catch (Exception e)
{
// Detect a thread abort exception.
if (e is ThreadAbortException)
{
Thread.ResetAbort();
}
base.Write("Pop3SslProxyConnection", "Constructor", e.Message,
65, WriteTo.EventLog, LogType.Error);
}
}
/// <summary>
/// Message body and attachment constructor.
/// </summary>
/// <param name="lines">The array of lines in the message.</param>
/// <param name="startOfBody">The start of the body data.</param>
/// <param name="multipartBoundary">The multipary boundary.</param>
/// <param name="mainContentType">The main content type.</param>
/// <param name="writeAttachmentToFile">Write to file.</param>
/// <param name="connection">The connection object.</param>
public MessageBody(string[] lines, long startOfBody, string multipartBoundary,
string mainContentType, bool writeAttachmentToFile, Pop3ConnectionAdapter connection)
{
// Get the number of message lines.
long stopOfBody = lines.Length;
// If the multipart boudary is null then
// only a body part exists.
if (multipartBoundary == null)
{
// Create a new string builder.
StringBuilder sbText = new StringBuilder();
// For each line in the message
// append the body lines.
for (long i = startOfBody; i < stopOfBody; i++)
{
sbText.Append(lines[i].Replace("\n", "").Replace("\r", ""));
}
// Add a new body to the component
// list store.
_component.Add(new MessageAttachment(mainContentType, sbText.ToString(),
writeAttachmentToFile, connection));
}
// Multipart boundary exists then a body and attachment
// exists in the message.
else
{
// Get the multipart boundary
// string in the message.
string boundary = multipartBoundary;
// Set as first component or body
// of the message to get.
bool firstComponent = true;
// Loop through whole of email message
// get the bodt all attachments.
for (long i = startOfBody; i < stopOfBody;)
{
bool boundaryFound = true;
string contentType = null;
string name = null;
string filename = null;
string contentTransferEncoding = null;
string contentDescription = null;
string contentDisposition = null;
string data = null;
// If the first component is to be added
// this is the body of a multipart message.
if (firstComponent)
{
boundaryFound = false;
firstComponent = false;
// For all the lines in the message.
while (i < stopOfBody)
{
// Get the current line in the message.
string line = lines[i].Replace("\n", "").Replace("\r", "");
// If the end of the body boundary
// has been found then exit the loop
// all body data has been found.
if (EmailMessageParse.GetContentMappingHeaderType(line, boundary)
== Nequeo.Net.Mail.MesssageContentMappingType.MultipartBoundaryFound)
{
boundaryFound = true;
++i;
break;
}
else
{
++i;
}
}
}
// Check to see whether multipart boundary
// was not found. This will indicate that
// the message data is corrupt.
if (!boundaryFound)
{
throw new Exception("Missing multipart boundary: " + boundary);
}
// Initalise the end of header indicator.
bool endOfHeader = false;
// Read all header information.
// For all other lines in the
// messsage.
while ((i < stopOfBody))
{
// Get the current line in the message.
string line = lines[i].Replace("\n", "").Replace("\r", "");
// Get the current content mapping type.
Nequeo.Net.Mail.MesssageContentMappingType lineType
= EmailMessageParse.GetContentMappingHeaderType(line, boundary);
// Get the mapping type.
switch (lineType)
{
case Nequeo.Net.Mail.MesssageContentMappingType.ContentType:
// Mapping type is content type header.
// Get the content type data.
contentType = EmailMessageParse.ContentType(line);
break;
case Nequeo.Net.Mail.MesssageContentMappingType.ContentTransferEncoding:
// Mapping type is content transfer encoding header.
// Get the content transfer encoding data.
contentTransferEncoding = EmailMessageParse.ContentTransferEncoding(line);
break;
case Nequeo.Net.Mail.MesssageContentMappingType.ContentDisposition:
// Mapping type is content disposition header.
// Get the content disposition data.
contentDisposition = EmailMessageParse.ContentDisposition(line);
break;
case Nequeo.Net.Mail.MesssageContentMappingType.ContentDescription:
// Mapping type is content description header.
// Get the content description data.
contentDescription = EmailMessageParse.ContentDescription(line);
break;
case Nequeo.Net.Mail.MesssageContentMappingType.EndOfHeader:
// End of header has been found.
endOfHeader = true;
break;
}
// Increment to the next line after
// find the content mapping type in
// the prevoius line.
++i;
// If end of header found then search
// for the next component starting point
// search for the next attachment. break
// out of the loop and end the process.
if (endOfHeader)
{
break;
}
else
{
// Read all header information.
// For all other lines in the
// messsage.
while (i < stopOfBody)
{
// If more lines to read for this line.
if (line.Substring(line.Length - 1, 1).Equals(";"))
{
// Get the current line in the message.
string nextLine = lines[i].Replace("\r", "").Replace("\n", "");
// Get the current attachment header type.
// interate through each attachment data.
switch (EmailMessageParse.GetAttachmenHeaderType(nextLine))
{
case Nequeo.Net.Mail.MesssageAttachmentType.Name:
// Attachment name header type.
// Get the attachment name in the message.
name = EmailMessageParse.Name(nextLine);
break;
case Nequeo.Net.Mail.MesssageAttachmentType.Filename:
// Attachment file nale header type.
// Get the attachment file name in the message.
filename = EmailMessageParse.Filename(nextLine);
break;
case Nequeo.Net.Mail.MesssageAttachmentType.EndOfHeader:
// End of header has been found.
endOfHeader = true;
break;
}
// If the end of the attachment
// data has not been found
if (!endOfHeader)
{
// Assign the current line to
// the next line
line = nextLine;
++i;
}
else
{
// End the loop.
break;
}
}
else
{
// End the loop.
break;
}
}
}
}
// Boundary found to false.
boundaryFound = false;
// Create a new string builder.
StringBuilder sbText = new StringBuilder();
// Initailise the emial composed indicator.
bool emailComposed = false;
// For each remaining line in
// the message store the body
// and the attachment.
while (i < stopOfBody)
{
// Get the current line in the message.
string line = lines[i].Replace("\n", "");
// If the end of the body boundary
// has been found then exit the loop
// all component data has been found.
if (EmailMessageParse.GetContentMappingHeaderType(line, boundary)
== Nequeo.Net.Mail.MesssageContentMappingType.MultipartBoundaryFound)
{
boundaryFound = true;
++i;
break;
}
// If the component is done then
// the email is composed, this
// component has been completed
// composed.
else if (EmailMessageParse.GetContentMappingHeaderType(line, boundary)
== Nequeo.Net.Mail.MesssageContentMappingType.ComponentDone)
{
emailComposed = true;
break;
}
// Add the current line of component
// data to the string builder.
// Move to the next line in the message.
sbText.Append(lines[i]);
++i;
}
// If data has been built
// then this is the component data
// that is body or attachment data.
if (sbText.Length > 0)
{
data = sbText.ToString();
}
// Add a new message body or attachment to the
// component list store.
_component.Add(new MessageAttachment(contentType, name, filename,
contentTransferEncoding, contentDescription, contentDisposition,
data, writeAttachmentToFile, connection));
// If all multiparts have been
// composed then exit break
// out of the loop.
if (emailComposed)
{
break;
}
}
}
}
/// <summary>
/// Email message constructor.
/// </summary>
/// <param name="position">The position of the message.</param>
/// <param name="size">The size of the complete message.</param>
/// <param name="headersOnly">The should only header data be returned.</param>
/// <param name="headerLineCount">The number of header data lines to return.</param>
/// <param name="client">The current client socket.</param>
/// <param name="sslStream">The current secure socket layer client.</param>
/// <param name="message">The message object that will contain the message data.</param>
/// <param name="writeAttachmentToFile">Write the attachment to file.</param>
/// <param name="rawEmailMessageOnly">Get the complete raw email message only.</param>
/// <param name="connection">The current connection object.</param>
/// <param name="callbackHandler">The progress call back handler.</param>
public EmailMessage(long position, long size, bool headersOnly, long headerLineCount,
Socket client, SslStream sslStream, Message message, bool writeAttachmentToFile,
bool rawEmailMessageOnly, Pop3ConnectionAdapter connection,
Nequeo.Threading.ActionHandler <long> callbackHandler)
{
try
{
_size = size;
_client = client;
_sslStream = sslStream;
_connection = connection;
_inboxPosition = position;
_headersOnly = headersOnly;
_headerLineCount = headerLineCount;
_callbackHandler = callbackHandler;
_rawEmailMessageOnly = rawEmailMessageOnly;
_writeAttachmentToFile = writeAttachmentToFile;
// Load the email asynchronously.
// This point is blocked until the
// receive is complete.
LoadEmail(message);
// If the decoded email message is
// to be returned.
if (!rawEmailMessageOnly)
{
// Get body (if it exists)
IEnumerator multipartEnumerator =
MultipartEnumerator;
// For each multipart content, including
// attachments iterate through the array.
while (multipartEnumerator.MoveNext())
{
// Get the multipart object index.
MessageAttachment multipart = (MessageAttachment)
multipartEnumerator.Current;
// If this multipart object is a body type
// then get the data stored.
if (multipart.IsBody)
{
_body = multipart.Data;
}
// If this multipart object is an attachment type
// then add the file name to the collection.
if (multipart.IsAttachment)
{
// Create a new attachment class
// and add the file data.
Attachment attachment =
new Attachment()
{
FileName = multipart.Filename,
File = multipart.FileData,
FileExtention = multipart.FileExtension,
FileNoExtention = multipart.FileNoExtension,
Name = multipart.Name,
ContentTransferEncoding = multipart.ContentTransferEncoding,
Decoded = multipart.Decoded,
ContentDescription = multipart.ContentDescription,
ContentType = multipart.ContentType
};
// Add the attachment to the list.
message.Attachments.Add(attachment);
}
}
// Load the message data into the
// message class.
message.To = _to;
message.Cc = _cc;
message.Bcc = _bcc;
message.Size = _size;
message.Date = _date;
message.From = _from;
message.Subject = _subject;
message.ReplyTo = _replyTo;
message.Priority = _priority;
message.Received = _received;
message.ReturnPath = _returnPath;
message.Importance = _importance;
message.IsMultipart = _isMultipart;
message.Organization = _organization;
message.InboxPosition = _inboxPosition;
// If the message body is a html message.
if (_body.IndexOf("<html") > -1)
{
// A html message has been sent.
message.MessageType = Nequeo.Net.Mail.MessageType.Html;
// Get the starting index of the string
// and the ending index of the string.
int start = _body.IndexOf("<html");
int end = _body.LastIndexOf("</html>") + 7;
// Extract only the html part of the message body.
message.Body = _body.Substring(start, end - start);
}
else if (_body.IndexOf("<HTML") > -1)
{
// A rich text or html message has been sent.
message.MessageType = Nequeo.Net.Mail.MessageType.RichText;
// Get the starting index of the string
// and the ending index of the string.
int start = _body.IndexOf("<HTML");
int end = _body.LastIndexOf("</HTML>") + 7;
// Extract only the html part of the message body.
message.Body = _body.Substring(start, end - start);
}
else if (_body.ToLower().IndexOf("<xml") > -1)
{
// A xml message has been sent.
message.MessageType = Nequeo.Net.Mail.MessageType.Xml;
// Get the starting index of the string
// and the ending index of the string.
int start = _body.ToLower().IndexOf("<xml");
int end = _body.ToLower().LastIndexOf("</xml>") + 6;
// Extract only the xml part of the message body.
message.Body = _body.Substring(start, end - start);
}
else
{
// A normal text message has been sent.
message.MessageType = Nequeo.Net.Mail.MessageType.Text;
message.Body = _body;
}
}
}
catch (Exception ex)
{
throw new Exception(ex.Message);
}
}
