/// <summary> /// Exports an element as an IFC assembly with its members. /// </summary> /// <param name="exporterIFC">The exporter.</param> /// <param name="assemblyElem">The element to be exported as IFC assembly.</param> /// <param name="memberIds">The member element ids.</param> /// <param name="assemblyType">The IFC assembly type.</param> /// <param name="productWrapper">The ProductWrapper.</param> static void ExportAssemblyInstanceWithMembers(ExporterIFC exporterIFC, Element assemblyElem, ICollection <ElementId> memberIds, IFCElementAssemblyType assemblyType, ProductWrapper productWrapper) { HashSet <IFCAnyHandle> memberHnds = new HashSet <IFCAnyHandle>(); foreach (ElementId memberId in memberIds) { IFCAnyHandle memberHnd = ExporterCacheManager.ElementToHandleCache.Find(memberId); if (!IFCAnyHandleUtil.IsNullOrHasNoValue(memberHnd)) { memberHnds.Add(memberHnd); } } if (memberHnds.Count == 0) { return; } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcElementAssembly; if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, assemblyElem)) { IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; IFCAnyHandle localPlacement = placementSetter.LocalPlacement; string guid = GUIDUtil.CreateGUID(assemblyElem); IFCAnyHandle assemblyInstanceHnd = IFCInstanceExporter.CreateElementAssembly(exporterIFC, assemblyElem, guid, ownerHistory, localPlacement, null, IFCAssemblyPlace.NotDefined, assemblyType); productWrapper.AddElement(assemblyElem, assemblyInstanceHnd, placementSetter.LevelInfo, null, true); string aggregateGuid = GUIDUtil.CreateSubElementGUID(assemblyElem, (int)IFCAssemblyInstanceSubElements.RelAggregates); IFCInstanceExporter.CreateRelAggregates(file, aggregateGuid, ownerHistory, null, null, assemblyInstanceHnd, memberHnds); ExporterCacheManager.ElementsInAssembliesCache.UnionWith(memberHnds); // Update member local placements to be relative to the assembly. SetLocalPlacementsRelativeToAssembly(exporterIFC, localPlacement, memberHnds); } tr.Commit(); } }
/// <summary> /// Exports an element as a covering of type insulation. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> /// <returns>True if exported successfully, false otherwise.</returns> protected static bool ExportInsulation(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper) { if (element == null || geometryElement == null) { return(false); } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ecData.SetLocalPlacement(placementSetter.LocalPlacement); ElementId categoryId = CategoryUtil.GetSafeCategoryId(element); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true); IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element, categoryId, geometryElement, bodyExporterOptions, null, ecData, true); if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation)) { ecData.ClearOpenings(); return(false); } string guid = GUIDUtil.CreateGUID(element); IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle(); string revitObjectType = exporterIFC.GetFamilyName(); string name = NamingUtil.GetNameOverride(element, revitObjectType); string description = NamingUtil.GetDescriptionOverride(element, null); string objectType = NamingUtil.GetObjectTypeOverride(element, revitObjectType); IFCAnyHandle localPlacement = ecData.GetLocalPlacement(); string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element)); IFCAnyHandle insulation = IFCInstanceExporter.CreateCovering(file, guid, ownerHistory, name, description, objectType, localPlacement, representation, elementTag, "Insulation"); ExporterCacheManager.ElementToHandleCache.Register(element.Id, insulation); productWrapper.AddElement(element, insulation, placementSetter.LevelInfo, ecData, true); ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element); CategoryUtil.CreateMaterialAssociation(exporterIFC, insulation, matId); } } tr.Commit(); return(true); } }
/// <summary> /// Exports an element as building element proxy. /// </summary> /// <remarks> /// This function is called from the Export function, but can also be called directly if you do not /// want CreateInternalPropertySets to be called. /// </remarks> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> /// <returns>The handle if created, null otherwise.</returns> public static IFCAnyHandle ExportBuildingElementProxy(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper) { if (element == null || geometryElement == null) { return(null); } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcBuildingElementProxy; if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return(null); } IFCFile file = exporterIFC.GetFile(); IFCAnyHandle buildingElementProxy = null; using (IFCTransaction tr = new IFCTransaction(file)) { using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ecData.SetLocalPlacement(placementSetter.LocalPlacement); ElementId categoryId = CategoryUtil.GetSafeCategoryId(element); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element, categoryId, geometryElement, bodyExporterOptions, null, ecData, true); if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation)) { ecData.ClearOpenings(); return(null); } string guid = GUIDUtil.CreateGUID(element); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; IFCAnyHandle localPlacement = ecData.GetLocalPlacement(); buildingElementProxy = IFCInstanceExporter.CreateBuildingElementProxy(exporterIFC, element, guid, ownerHistory, localPlacement, representation, null); productWrapper.AddElement(element, buildingElementProxy, placementSetter.LevelInfo, ecData, true); } tr.Commit(); } } return(buildingElementProxy); }
/// <summary> /// Exports an element as building element proxy. /// </summary> /// <remarks> /// This function is called from the Export function, but can also be called directly if you do not /// want CreateInternalPropertySets to be called. /// </remarks> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> /// <returns>The handle if created, null otherwise.</returns> public static IFCAnyHandle ExportBuildingElementProxy(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper) { if (element == null || geometryElement == null) { return(null); } IFCFile file = exporterIFC.GetFile(); IFCAnyHandle buildingElementProxy = null; using (IFCTransaction tr = new IFCTransaction(file)) { using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ecData.SetLocalPlacement(placementSetter.LocalPlacement); ElementId categoryId = CategoryUtil.GetSafeCategoryId(element); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true); IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element, categoryId, geometryElement, bodyExporterOptions, null, ecData, true); if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation)) { ecData.ClearOpenings(); return(null); } string guid = GUIDUtil.CreateGUID(element); IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle(); string revitObjectType = exporterIFC.GetFamilyName(); string name = NamingUtil.GetNameOverride(element, revitObjectType); string description = NamingUtil.GetDescriptionOverride(element, null); string objectType = NamingUtil.GetObjectTypeOverride(element, revitObjectType); IFCAnyHandle localPlacement = ecData.GetLocalPlacement(); string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element)); buildingElementProxy = IFCInstanceExporter.CreateBuildingElementProxy(file, guid, ownerHistory, name, description, objectType, localPlacement, representation, elementTag, null); productWrapper.AddElement(element, buildingElementProxy, placementSetter.LevelInfo, ecData, true); } tr.Commit(); } } return(buildingElementProxy); }
/// <summary> /// Exports an element as an IFC assembly with its members. /// </summary> /// <param name="exporterIFC">The exporter.</param> /// <param name="assemblyElem">The element to be exported as IFC assembly.</param> /// <param name="memberIds">The member element ids.</param> /// <param name="assemblyType">The IFC assembly type.</param> /// <param name="productWrapper">The ProductWrapper.</param> static void ExportAssemblyInstanceWithMembers(ExporterIFC exporterIFC, Element assemblyElem, ICollection <ElementId> memberIds, IFCElementAssemblyType assemblyType, ProductWrapper productWrapper) { HashSet <IFCAnyHandle> memberHnds = new HashSet <IFCAnyHandle>(); foreach (ElementId memberId in memberIds) { IFCAnyHandle memberHnd = ExporterCacheManager.ElementToHandleCache.Find(memberId); if (!IFCAnyHandleUtil.IsNullOrHasNoValue(memberHnd)) { memberHnds.Add(memberHnd); } } if (memberHnds.Count == 0) { return; } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, assemblyElem)) { IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; IFCAnyHandle localPlacement = placementSetter.LocalPlacement; string guid = GUIDUtil.CreateGUID(assemblyElem); string name = NamingUtil.GetIFCName(assemblyElem); string description = NamingUtil.GetDescriptionOverride(assemblyElem, null); string objectType = NamingUtil.GetObjectTypeOverride(assemblyElem, exporterIFC.GetFamilyName()); string elementTag = NamingUtil.CreateIFCElementId(assemblyElem); IFCAnyHandle assemblyInstanceHnd = IFCInstanceExporter.CreateElementAssembly(file, guid, ownerHistory, name, description, objectType, localPlacement, null, elementTag, IFCAssemblyPlace.NotDefined, assemblyType); productWrapper.AddElement(assemblyElem, assemblyInstanceHnd, placementSetter.LevelInfo, null, true); string aggregateGuid = GUIDUtil.CreateSubElementGUID(assemblyElem, (int)IFCAssemblyInstanceSubElements.RelAggregates); IFCInstanceExporter.CreateRelAggregates(file, aggregateGuid, ownerHistory, null, null, assemblyInstanceHnd, memberHnds); ExporterCacheManager.ElementsInAssembliesCache.UnionWith(memberHnds); // Update member local placements to be relative to the assembly. SetLocalPlacementsRelativeToAssembly(exporterIFC, localPlacement, memberHnds); } tr.Commit(); } }
/// <summary> /// Export the roof to IfcRoof containing its parts. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The roof element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void ExportRoofAsParts(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper) { string ifcEnumType; IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, element, out ifcEnumType); if (exportType.IsUnKnown) { exportType = new IFCExportInfoPair(IFCEntityType.IfcRoof); } // Check the intended IFC entity or type name is in the exclude list specified in the UI if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(exportType.ExportType)) { return; } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction transaction = new IFCTransaction(file)) { // Check for containment override IFCAnyHandle overrideContainerHnd = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd); using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd)) { IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; IFCAnyHandle localPlacement = setter.LocalPlacement; IFCAnyHandle prodRepHnd = null; string elementGUID = GUIDUtil.CreateGUID(element); IFCAnyHandle roofHandle = IFCInstanceExporter.CreateGenericIFCEntity( exportType, exporterIFC, element, elementGUID, ownerHistory, localPlacement, prodRepHnd); // Export the parts PartExporter.ExportHostPart(exporterIFC, element, roofHandle, productWrapper, setter, localPlacement, null); productWrapper.AddElement(element, roofHandle, setter, null, true, exportType); transaction.Commit(); } } }
/// <summary> /// Export the roof to IfcRoof containing its parts. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The roof element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void ExportRoofAsParts(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper) { // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum; if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcRoof", out elementClassTypeEnum)) { if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction transaction = new IFCTransaction(file)) { using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element)) { IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; IFCAnyHandle localPlacement = setter.LocalPlacement; IFCAnyHandle prodRepHnd = null; string elementGUID = GUIDUtil.CreateGUID(element); string elementName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element)); string elementDescription = NamingUtil.GetDescriptionOverride(element, null); string elementObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName()); string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element)); //need to convert the string to enum string ifcEnumType = ExporterUtil.GetIFCTypeFromExportTable(exporterIFC, element); ifcEnumType = IFCValidateEntry.GetValidIFCType(element, ifcEnumType); IFCAnyHandle roofHandle = IFCInstanceExporter.CreateRoof(file, elementGUID, ownerHistory, elementName, elementDescription, elementObjectType, localPlacement, prodRepHnd, elementTag, ifcEnumType); // Export the parts PartExporter.ExportHostPart(exporterIFC, element, roofHandle, productWrapper, setter, localPlacement, null); productWrapper.AddElement(element, roofHandle, setter, null, true); transaction.Commit(); } } }
/// <summary> /// Export the roof to IfcRoof containing its parts. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The roof element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void ExportRoofAsParts(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper) { // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRoof; if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction transaction = new IFCTransaction(file)) { // Check for containment override IFCAnyHandle overrideContainerHnd = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd); using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd)) { IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; IFCAnyHandle localPlacement = setter.LocalPlacement; IFCAnyHandle prodRepHnd = null; string elementGUID = GUIDUtil.CreateGUID(element); //need to convert the string to enum string ifcEnumType = ExporterUtil.GetIFCTypeFromExportTable(exporterIFC, element); //ifcEnumType = IFCValidateEntry.GetValidIFCPredefinedType(element, ifcEnumType); IFCAnyHandle roofHandle = IFCInstanceExporter.CreateRoof(exporterIFC, element, elementGUID, ownerHistory, localPlacement, prodRepHnd, ifcEnumType); // Export the parts PartExporter.ExportHostPart(exporterIFC, element, roofHandle, productWrapper, setter, localPlacement, null); productWrapper.AddElement(element, roofHandle, setter, null, true); transaction.Commit(); } } }
/// <summary> /// Exports a Group as an IfcGroup. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element.</param> /// <param name="productWrapper">The ProductWrapper.</param> /// <returns>True if exported successfully, false otherwise.</returns> public static bool ExportGroupElement(ExporterIFC exporterIFC, Group element, ProductWrapper productWrapper) { if (element == null) { return(false); } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcGroup; if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return(false); } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { IFCAnyHandle groupHnd = null; string guid = GUIDUtil.CreateGUID(element); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; string name = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element)); string description = NamingUtil.GetDescriptionOverride(element, null); string objectType = NamingUtil.GetObjectTypeOverride(element, NamingUtil.GetFamilyAndTypeName(element)); string longName = NamingUtil.GetLongNameOverride(element, null); string ifcEnumType; IFCExportInfoPair exportAs = ExporterUtil.GetObjectExportType(exporterIFC, element, out ifcEnumType); if (exportAs.ExportInstance == IFCEntityType.IfcGroup) { groupHnd = IFCInstanceExporter.CreateGroup(file, guid, ownerHistory, name, description, objectType); } else if (!ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4) { if (exportAs.ExportInstance == IFCEntityType.IfcBuildingSystem) { groupHnd = IFCInstanceExporter.CreateBuildingSystem(file, exportAs, guid, ownerHistory, name, description, objectType, longName); } else if (exportAs.ExportInstance == IFCEntityType.IfcFurniture) { groupHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportAs, exporterIFC, element, guid, ownerHistory, null, null); } } if (groupHnd == null) { return(false); } GroupInfo groupInfo = ExporterCacheManager.GroupCache.RegisterGroup(element.Id, groupHnd); if (IFCAnyHandleUtil.IsSubTypeOf(groupHnd, IFCEntityType.IfcProduct)) { IFCAnyHandle overrideContainerHnd = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd); using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd)) { IFCAnyHandle localPlacementToUse; ElementId roomId = setter.UpdateRoomRelativeCoordinates(element, out localPlacementToUse); bool containedInSpace = (roomId != ElementId.InvalidElementId); productWrapper.AddElement(element, groupHnd, setter.LevelInfo, null, !containedInSpace, exportAs); if (containedInSpace) { ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomId, groupHnd); } } } else { productWrapper.AddElement(element, groupHnd, exportAs); } // Check or set the cached Group's export type if (groupInfo.GroupType.ExportInstance == IFCEntityType.UnKnown) { ExporterCacheManager.GroupCache.RegisterOrUpdateGroupType(element.Id, exportAs); } else if (groupInfo.GroupType.ExportInstance != exportAs.ExportInstance) { throw new InvalidOperationException("Inconsistent Group export entity type"); } tr.Commit(); return(true); } }
/// <summary> /// Exports a CeilingAndFloor element to IFC. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="floor">The floor element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement, ProductWrapper productWrapper) { if (geometryElement == null) { return; } // export parts or not bool exportParts = PartExporter.CanExportParts(floorElement); if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false)) { return; } IFCFile file = exporterIFC.GetFile(); string ifcEnumType; IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType); using (IFCTransaction tr = new IFCTransaction(file)) { bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor)); IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>(); IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>(); IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>(); using (IFCTransformSetter transformSetter = IFCTransformSetter.Create()) { using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement)) { IFCAnyHandle localPlacement = placementSetter.LocalPlacement; IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; // The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association. // Disable calling ExportSlabAsExtrusion if we can't handle potential openings. bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null; bool exportedAsInternalExtrusion = false; ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement); IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>(); IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>(); IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >(); IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>(); Plane floorPlane = GeometryUtil.CreateDefaultPlane(); IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>(); if (canExportAsContainerOrWithExtrusionAnalyzer) { Floor floor = floorElement as Floor; // First, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only. // Also limited to cases with line and arc boundaries. // SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement); IList <Solid> solids = solidMeshInfo.GetSolids(); IList <Mesh> meshes = solidMeshInfo.GetMeshes(); if (solids.Count == 1 && meshes.Count == 0) { bool completelyClipped; // floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor XYZ floorExtrusionDirection = new XYZ(0, 0, -1); XYZ modelOrigin = XYZ.Zero; XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top); if (floorOrigin == null) { // GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't // go thruough te Revit model orgigin. We'll try the midpoint of the bounding box instead. BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null); modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0; floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top); } if (floorOrigin != null) { XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top); Plane extrusionAnalyzerFloorPlane = new Plane(floorDir, floorOrigin); HandleAndData floorAndProperties = ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement, catId, solids[0], extrusionAnalyzerFloorPlane, floorExtrusionDirection, null, out completelyClipped); if (completelyClipped) { return; } if (floorAndProperties.Handle != null) { IList <IFCAnyHandle> representations = new List <IFCAnyHandle>(); representations.Add(floorAndProperties.Handle); IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations); prodReps.Add(prodRep); repTypes.Add(ShapeRepresentationType.SweptSolid); if (floorAndProperties.Data != null) { loopExtraParams.Add(floorAndProperties.Data); } } } } } // Use internal routine as backup that handles openings. if (prodReps.Count == 0 && canExportAsInternalExtrusion) { exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement, geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps, out extrusionLoops, out loopExtraParams, floorPlane); for (int ii = 0; ii < prodReps.Count; ii++) { // all are extrusions repTypes.Add(ShapeRepresentationType.SweptSolid); } } if (prodReps.Count == 0) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium); BodyData bodyData; IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData); if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd)) { ecData.ClearOpenings(); return; } prodReps.Add(prodDefHnd); repTypes.Add(bodyData.ShapeRepresentationType); } } // Create the slab from either the extrusion or the BRep information. string ifcGUID = GUIDUtil.CreateGUID(floorElement); int numReps = exportParts ? 1 : prodReps.Count; string entityType = null; switch (exportType) { case IFCExportType.IfcFooting: if (ExporterCacheManager.ExportOptionsCache.ExportAs4) { entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCFootingType>(floorElement, ifcEnumType, null); } else { entityType = IFCValidateEntry.GetValidIFCType <IFCFootingType>(floorElement, ifcEnumType, null); } break; case IFCExportType.IfcCovering: entityType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING"); break; case IFCExportType.IfcRamp: if (ExporterCacheManager.ExportOptionsCache.ExportAs4) { entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCRampType>(floorElement, ifcEnumType, null); } else { entityType = IFCValidateEntry.GetValidIFCType <IFCRampType>(floorElement, ifcEnumType, null); } break; default: bool isBaseSlab = false; AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel(); if (analyticalModel != null) { AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs(); isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat); } entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR"); break; } for (int ii = 0; ii < numReps; ii++) { string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1)); string ifcDescription = NamingUtil.GetDescriptionOverride(floorElement, null); string ifcObjectType = NamingUtil.GetObjectTypeOverride(floorElement, exporterIFC.GetFamilyName()); string ifcTag = NamingUtil.GetTagOverride(floorElement, NamingUtil.CreateIFCElementId(floorElement)); string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID(); IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement; IFCAnyHandle slabHnd = null; // TODO: replace with CreateGenericBuildingElement. switch (exportType) { case IFCExportType.IfcFooting: slabHnd = IFCInstanceExporter.CreateFooting(file, currentGUID, ownerHistory, ifcName, ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii], ifcTag, entityType); break; case IFCExportType.IfcCovering: slabHnd = IFCInstanceExporter.CreateCovering(file, currentGUID, ownerHistory, ifcName, ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii], ifcTag, entityType); break; case IFCExportType.IfcRamp: slabHnd = IFCInstanceExporter.CreateRamp(file, currentGUID, ownerHistory, ifcName, ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii], ifcTag, entityType); break; default: slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName, ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii], ifcTag, entityType); break; } if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd)) { return; } if (exportParts) { PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null); } slabHnds.Add(slabHnd); if (!exportParts) { if (repTypes[ii] == ShapeRepresentationType.Brep) { brepSlabHnds.Add(slabHnd); } else { nonBrepSlabHnds.Add(slabHnd); } } } for (int ii = 0; ii < numReps; ii++) { IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null; productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true); } // This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not // controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View if (exportedAsInternalExtrusion) { ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo, localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative()); } } if (!exportParts) { if (nonBrepSlabHnds.Count > 0) { HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds, geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false); } if (brepSlabHnds.Count > 0) { HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds, geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true); } } } tr.Commit(); return; } }
/// <summary> /// Exports an element to IFC footing. /// </summary> /// <param name="exporterIFC"> /// The ExporterIFC object. /// </param> /// <param name="element"> /// The element. /// </param> /// <param name="geometryElement"> /// The geometry element. /// </param> /// <param name="ifcEnumType"> /// The string value represents the IFC type. /// </param> /// <param name="productWrapper"> /// The ProductWrapper. /// </param> public static void ExportFooting(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, string ifcEnumType, ProductWrapper productWrapper) { // export parts or not bool exportParts = PartExporter.CanExportParts(element); if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false)) { return; } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ecData.SetLocalPlacement(setter.LocalPlacement); IFCAnyHandle prodRep = null; ElementId matId = ElementId.InvalidElementId; if (!exportParts) { ElementId catId = CategoryUtil.GetSafeCategoryId(element); matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true); prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element, catId, geometryElement, bodyExporterOptions, null, ecData, true); if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep)) { ecData.ClearOpenings(); return; } } string instanceGUID = GUIDUtil.CreateGUID(element); string instanceName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element)); string instanceDescription = NamingUtil.GetDescriptionOverride(element, null); string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName()); string instanceTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element)); string footingType = GetIFCFootingType(ifcEnumType); // need to keep it for legacy support when original data follows slightly diff naming footingType = IFCValidateEntry.GetValidIFCType(element, footingType); IFCAnyHandle footing = IFCInstanceExporter.CreateFooting(file, instanceGUID, exporterIFC.GetOwnerHistoryHandle(), instanceName, instanceDescription, instanceObjectType, ecData.GetLocalPlacement(), prodRep, instanceTag, footingType); if (exportParts) { PartExporter.ExportHostPart(exporterIFC, element, footing, productWrapper, setter, setter.LocalPlacement, null); } else { if (matId != ElementId.InvalidElementId) { CategoryUtil.CreateMaterialAssociation(exporterIFC, footing, matId); } } productWrapper.AddElement(element, footing, setter, ecData, true); OpeningUtil.CreateOpeningsIfNecessary(footing, element, ecData, null, exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper); } } tr.Commit(); } }
/// <summary> /// Exports a CeilingAndFloor element to IFC. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="floor">The floor element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement, ProductWrapper productWrapper) { if (geometryElement == null) { return; } // export parts or not bool exportParts = PartExporter.CanExportParts(floorElement); if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false)) { return; } IFCFile file = exporterIFC.GetFile(); string ifcEnumType; IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType); IFCAnyHandle type = null; MaterialLayerSetInfo layersetInfo = null; if (!ElementFilteringUtil.IsElementVisible(floorElement)) { return; } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum; if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportInstance.ToString(), out elementClassTypeEnum) || Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportType.ToString(), out elementClassTypeEnum)) { if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } } Document doc = floorElement.Document; using (SubTransaction tempPartTransaction = new SubTransaction(doc)) { // For IFC4RV export, Floor will be split into its parts(temporarily) in order to export the floor by its parts bool exportByComponents = ExporterUtil.ShouldExportByComponents(floorElement, exportParts); using (IFCTransaction tr = new IFCTransaction(file)) { bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor)); if (canExportAsContainerOrWithExtrusionAnalyzer) { // Try to export the Floor slab as a container. If that succeeds, we are done. // If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave // this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms. IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, floorElement, geometryElement, productWrapper); if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd)) { tr.Commit(); return; } } IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>(); IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>(); IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>(); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; using (IFCTransformSetter transformSetter = IFCTransformSetter.Create()) { // Check for containment override IFCAnyHandle overrideContainerHnd = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, floorElement, out overrideContainerHnd); using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement, null, null, overrideContainerId, overrideContainerHnd)) { IFCAnyHandle localPlacement = placementSetter.LocalPlacement; // The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association. // Disable calling ExportSlabAsExtrusion if we can't handle potential openings. bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null; bool exportedAsInternalExtrusion = false; ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement); IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>(); IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>(); IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >(); IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>(); Plane floorPlane = GeometryUtil.CreateDefaultPlane(); IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>(); if (canExportAsContainerOrWithExtrusionAnalyzer) { Floor floor = floorElement as Floor; // Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only. // Also limited to cases with line and arc boundaries. // SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement); IList <Solid> solids = solidMeshInfo.GetSolids(); IList <Mesh> meshes = solidMeshInfo.GetMeshes(); IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(floorElement.Document, exporterIFC, ref solids, ref meshes); if (solids.Count == 1 && meshes.Count == 0) { bool completelyClipped; // floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor XYZ floorExtrusionDirection = new XYZ(0, 0, -1); XYZ modelOrigin = XYZ.Zero; XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top); if (floorOrigin == null) { // GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't // go through the Revit model origin. We'll try the midpoint of the bounding box instead. BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null); modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0; floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top); } if (floorOrigin != null) { XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top); Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir); GenerateAdditionalInfo additionalInfo = GenerateAdditionalInfo.GenerateBody; additionalInfo |= ExporterCacheManager.ExportOptionsCache.ExportAs4 ? GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None; // Skip generate body item for IFC4RV. It will be handled later in PartExporter.ExportHostPartAsShapeAspects() if (exportByComponents) { additionalInfo &= ~GenerateAdditionalInfo.GenerateBody; } HandleAndData floorAndProperties = ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement, catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null, out completelyClipped, addInfo: additionalInfo); if (completelyClipped) { return; } IList <IFCAnyHandle> representations = new List <IFCAnyHandle>(); if (floorAndProperties.Handle != null) { representations.Add(floorAndProperties.Handle); repTypes.Add(ShapeRepresentationType.SweptSolid); } // Footprint representation will only be exported in export to IFC4 if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null)) { IFCAnyHandle footprintShapeRep = floorAndProperties.FootprintInfo.CreateFootprintShapeRepresentation(exporterIFC); representations.Add(footprintShapeRep); } if (exportByComponents) { IFCAnyHandle prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, representations); prodReps.Add(prodRep); } else if (representations.Count > 0 && floorAndProperties.Handle != null) // Only when at least the body rep exists will come here { IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations); prodReps.Add(prodRep); } if (floorAndProperties.Data != null) { loopExtraParams.Add(floorAndProperties.Data); } } } } // Use internal routine as backup that handles openings. if (prodReps.Count == 0 && canExportAsInternalExtrusion && !exportByComponents) { exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement, geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps, out extrusionLoops, out loopExtraParams, floorPlane); PotentiallyFixPresentationLayerAssignment(floorElement, prodReps); for (int ii = 0; ii < prodReps.Count; ii++) { // all are extrusions repTypes.Add(ShapeRepresentationType.SweptSolid); // Footprint representation will only be exported in export to IFC4 if (ExporterCacheManager.ExportOptionsCache.ExportAs4) { if (extrusionLoops.Count > ii) { if (extrusionLoops[ii].Count > 0) { // Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]); IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal); IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint"); ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>(); repItem.Add(footprintGeomRepItem); IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem); IList <IFCAnyHandle> reps = new List <IFCAnyHandle>(); reps.Add(footprintShapeRepresentation); IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps); } } } } } IFCAnyHandle prodDefHnd; if (prodReps.Count == 0) { if (exportByComponents) { prodDefHnd = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, null); prodReps.Add(prodDefHnd); } else { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { // Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium); BodyData bodyData; prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData); if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd)) { ecData.ClearOpenings(); return; } prodReps.Add(prodDefHnd); repTypes.Add(bodyData.ShapeRepresentationType); } } } // Create the slab from either the extrusion or the BRep information. string ifcGUID = GUIDUtil.CreateGUID(floorElement); int numReps = exportParts ? 1 : prodReps.Count; // Deal with a couple of cases that have non-standard defaults. switch (exportType.ExportInstance) { case IFCEntityType.IfcCovering: exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING"); break; case IFCEntityType.IfcSlab: bool isBaseSlab = false; AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel(); if (analyticalModel != null) { AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs(); isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat); } exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR"); break; } for (int ii = 0; ii < numReps; ii++) { string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1)); string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID(); IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement; IFCAnyHandle slabHnd = null; slabHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, floorElement, currentGUID, ownerHistory, localPlacementHnd, exportParts ? null : prodReps[ii]); if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd)) { return; } if (!string.IsNullOrEmpty(ifcName)) { IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, ifcName); } // Pre IFC4 Slab does not have PredefinedType if (!string.IsNullOrEmpty(exportType.ValidatedPredefinedType) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4) { IFCAnyHandleUtil.SetAttribute(slabHnd, "PredefinedType", exportType.ValidatedPredefinedType, true); } if (exportParts && !ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView) { PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null); } else if (exportByComponents) { IFCExtrusionCreationData partECData = new IFCExtrusionCreationData(); IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, floorElement, prodReps[ii], productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, out layersetInfo, partECData); loopExtraParams.Add(partECData); } slabHnds.Add(slabHnd); // For IFC4RV, export of the geometry is already handled in PartExporter.ExportHostPartAsShapeAspects() if (!exportParts && !exportByComponents) { if (repTypes[ii] == ShapeRepresentationType.Brep || repTypes[ii] == ShapeRepresentationType.Tessellation) { brepSlabHnds.Add(slabHnd); } else { nonBrepSlabHnds.Add(slabHnd); } } } for (int ii = 0; ii < numReps; ii++) { IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null; productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true, exportType); type = ExporterUtil.CreateGenericTypeFromElement(floorElement, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper); ExporterCacheManager.TypeRelationsCache.Add(type, slabHnds[ii]); ExporterUtil.AddIntoComplexPropertyCache(slabHnds[ii], layersetInfo); } // This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not // controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View if (exportedAsInternalExtrusion) { ISet <IFCAnyHandle> oldCreatedObjects = productWrapper.GetAllObjects(); ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo, localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative()); ISet <IFCAnyHandle> newCreatedObjects = productWrapper.GetAllObjects(); newCreatedObjects.ExceptWith(oldCreatedObjects); PotentiallyFixPresentationLayerAssignment(floorElement, newCreatedObjects); } } if (!exportParts) { if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView) { HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, productWrapper.GetAnElement(), geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type); } else { if (nonBrepSlabHnds.Count > 0) { HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds, geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type); } if (brepSlabHnds.Count > 0) { HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds, geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true, type); } } } } tr.Commit(); return; } } }
/// <summary> /// Exports an element as a covering of type insulation. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> /// <returns>True if exported successfully, false otherwise.</returns> public static bool ExportDuctLining(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper) { if (element == null || geometryElement == null) { return(false); } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum; if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcCovering", out elementClassTypeEnum)) { if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return(false); } } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ecData.SetLocalPlacement(placementSetter.LocalPlacement); ElementId categoryId = CategoryUtil.GetSafeCategoryId(element); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element, categoryId, geometryElement, bodyExporterOptions, null, ecData, true); if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation)) { ecData.ClearOpenings(); return(false); } string guid = GUIDUtil.CreateGUID(element); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; string revitObjectType = exporterIFC.GetFamilyName(); string name = NamingUtil.GetNameOverride(element, revitObjectType); string description = NamingUtil.GetDescriptionOverride(element, null); string objectType = NamingUtil.GetObjectTypeOverride(element, revitObjectType); IFCAnyHandle localPlacement = ecData.GetLocalPlacement(); string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element)); IFCAnyHandle ductLining = IFCInstanceExporter.CreateCovering(file, guid, ownerHistory, name, description, objectType, localPlacement, representation, elementTag, "Wrapping"); ExporterCacheManager.ElementToHandleCache.Register(element.Id, ductLining); productWrapper.AddElement(element, ductLining, placementSetter.LevelInfo, ecData, true); ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element); CategoryUtil.CreateMaterialAssociation(exporterIFC, ductLining, matId); } } tr.Commit(); return(true); } }
/// <summary> /// Exports a roof to IfcRoof. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="ifcEnumType">The roof type.</param> /// <param name="roof">The roof element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void ExportRoof(ExporterIFC exporterIFC, string ifcEnumType, Element roof, GeometryElement geometryElement, ProductWrapper productWrapper) { if (roof == null || geometryElement == null) { return; } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, roof)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { // If the roof is an in-place family, we will allow any arbitrary orientation. While this may result in some // in-place "cubes" exporting with the wrong direction, it is unlikely that an in-place family would be // used for this reason in the first place. ecData.PossibleExtrusionAxes = (roof is FamilyInstance) ? IFCExtrusionAxes.TryXYZ : IFCExtrusionAxes.TryZ; ecData.AreInnerRegionsOpenings = true; ecData.SetLocalPlacement(placementSetter.LocalPlacement); ElementId categoryId = CategoryUtil.GetSafeCategoryId(roof); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); BodyData bodyData; IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, roof, categoryId, geometryElement, bodyExporterOptions, null, ecData, out bodyData); if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation)) { ecData.ClearOpenings(); return; } bool exportSlab = ecData.ScaledLength > MathUtil.Eps(); string guid = GUIDUtil.CreateGUID(roof); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; string roofName = NamingUtil.GetNameOverride(roof, NamingUtil.GetIFCName(roof)); string roofDescription = NamingUtil.GetDescriptionOverride(roof, null); string roofObjectType = NamingUtil.GetObjectTypeOverride(roof, NamingUtil.CreateIFCObjectName(exporterIFC, roof)); IFCAnyHandle localPlacement = ecData.GetLocalPlacement(); string elementTag = NamingUtil.GetTagOverride(roof, NamingUtil.CreateIFCElementId(roof)); string roofType = GetIFCRoofType(ifcEnumType); roofType = IFCValidateEntry.GetValidIFCType(roof, ifcEnumType); IFCAnyHandle roofHnd = IFCInstanceExporter.CreateRoof(file, guid, ownerHistory, roofName, roofDescription, roofObjectType, localPlacement, exportSlab ? null : representation, elementTag, roofType); productWrapper.AddElement(roof, roofHnd, placementSetter.LevelInfo, ecData, true); // will export its host object materials later if it is a roof if (!(roof is RoofBase)) { CategoryUtil.CreateMaterialAssociations(exporterIFC, roofHnd, bodyData.MaterialIds); } if (exportSlab) { string slabGUID = GUIDUtil.CreateSubElementGUID(roof, (int)IFCRoofSubElements.RoofSlabStart); string slabName = roofName + ":1"; IFCAnyHandle slabLocalPlacementHnd = ExporterUtil.CopyLocalPlacement(file, localPlacement); IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, slabGUID, ownerHistory, slabName, roofDescription, roofObjectType, slabLocalPlacementHnd, representation, elementTag, "ROOF"); Transform offsetTransform = (bodyData != null) ? bodyData.OffsetTransform : Transform.Identity; OpeningUtil.CreateOpeningsIfNecessary(slabHnd, roof, ecData, offsetTransform, exporterIFC, slabLocalPlacementHnd, placementSetter, productWrapper); ExporterUtil.RelateObject(exporterIFC, roofHnd, slabHnd); productWrapper.AddElement(null, slabHnd, placementSetter.LevelInfo, ecData, false); CategoryUtil.CreateMaterialAssociations(exporterIFC, slabHnd, bodyData.MaterialIds); } } tr.Commit(); } } }
/// <summary> /// Exports an element as an annotation. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="filledRegion">The filled region element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void Export(ExporterIFC exporterIFC, FilledRegion filledRegion, GeometryElement geometryElement, ProductWrapper productWrapper) { if (filledRegion == null || geometryElement == null) { return; } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcAnnotation; if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction transaction = new IFCTransaction(file)) { IList <CurveLoop> boundaries = filledRegion.GetBoundaries(); if (boundaries.Count == 0) { return; } Plane plane = null; try { plane = boundaries[0].GetPlane(); } catch { return; } Transform orientTrf = GeometryUtil.CreateTransformFromPlane(plane); XYZ projectionDirection = plane.Normal; IList <IList <CurveLoop> > sortedLoops = ExporterIFCUtils.SortCurveLoops(boundaries); if (sortedLoops.Count == 0) { return; } FilledRegionType filledRegionType = filledRegion.Document.GetElement(filledRegion.GetTypeId()) as FilledRegionType; Color color = filledRegionType != null?CategoryUtil.GetSafeColor(filledRegionType.ForegroundPatternColor) : new Color(0, 0, 0); ElementId foregroundPatternId = filledRegionType != null ? filledRegionType.ForegroundPatternId : ElementId.InvalidElementId; ElementId categoryId = CategoryUtil.GetSafeCategoryId(filledRegion); using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, filledRegion, null, orientTrf)) { foreach (IList <CurveLoop> curveLoopList in sortedLoops) { IFCAnyHandle outerCurve = null; HashSet <IFCAnyHandle> innerCurves = null; for (int ii = 0; ii < curveLoopList.Count; ii++) { IFCAnyHandle ifcCurve = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, curveLoopList[ii], orientTrf, projectionDirection); if (ii == 0) { outerCurve = ifcCurve; } else { if (innerCurves == null) { innerCurves = new HashSet <IFCAnyHandle>(); } innerCurves.Add(ifcCurve); } } IFCAnyHandle representItem = IFCInstanceExporter.CreateAnnotationFillArea(file, outerCurve, innerCurves); file.CreateStyle(exporterIFC, representItem, color, foregroundPatternId); HashSet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>(); bodyItems.Add(representItem); IFCAnyHandle bodyRepHnd = RepresentationUtil.CreateAnnotationSetRep(exporterIFC, filledRegion, categoryId, exporterIFC.Get2DContextHandle(), bodyItems); if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRepHnd)) { return; } List <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>(); shapeReps.Add(bodyRepHnd); IFCAnyHandle productShape = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps); IFCAnyHandle annotation = IFCInstanceExporter.CreateAnnotation(exporterIFC, filledRegion, GUIDUtil.CreateGUID(), ExporterCacheManager.OwnerHistoryHandle, setter.LocalPlacement, productShape); productWrapper.AddAnnotation(annotation, setter.LevelInfo, true); } } transaction.Commit(); } }
/// <summary> /// Exports an element as an IFC assembly. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element.</param> /// <param name="productWrapper">The ProductWrapper.</param> /// <returns>True if exported successfully, false otherwise.</returns> public static bool ExportAssemblyInstanceElement(ExporterIFC exporterIFC, AssemblyInstance element, ProductWrapper productWrapper) { if (element == null) { return(false); } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { IFCAnyHandle assemblyInstanceHnd = null; string guid = GUIDUtil.CreateGUID(element); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; IFCAnyHandle localPlacement = null; PlacementSetter placementSetter = null; IFCLevelInfo levelInfo = null; bool relateToLevel = true; string ifcEnumType; IFCExportInfoPair exportAs = ExporterUtil.GetExportType(exporterIFC, element, out ifcEnumType); if (exportAs.ExportInstance == IFCEntityType.IfcSystem) { string name = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element)); string description = NamingUtil.GetDescriptionOverride(element, null); string objectType = NamingUtil.GetObjectTypeOverride(element, NamingUtil.GetFamilyAndTypeName(element)); assemblyInstanceHnd = IFCInstanceExporter.CreateSystem(file, guid, ownerHistory, name, description, objectType); // Create classification reference when System has classification filed name assigned to it ClassificationUtil.CreateClassification(exporterIFC, file, element, assemblyInstanceHnd); HashSet <IFCAnyHandle> relatedBuildings = new HashSet <IFCAnyHandle>(); relatedBuildings.Add(ExporterCacheManager.BuildingHandle); IFCAnyHandle relServicesBuildings = IFCInstanceExporter.CreateRelServicesBuildings(file, GUIDUtil.CreateGUID(), ExporterCacheManager.OwnerHistoryHandle, null, null, assemblyInstanceHnd, relatedBuildings); relateToLevel = false; // Already related to the building via IfcRelServicesBuildings. } else { // Check for containment override IFCAnyHandle overrideContainerHnd = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd); using (placementSetter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd)) { IFCAnyHandle representation = null; // We have limited support for exporting assemblies as other container types. localPlacement = placementSetter.LocalPlacement; levelInfo = placementSetter.LevelInfo; switch (exportAs.ExportInstance) { case IFCEntityType.IfcCurtainWall: //case IFCExportType.IfcCurtainWallType: //string cwPredefinedType = IFCValidateEntry.GetValidIFCPredefinedType(element, ifcEnumType, "IfcCurtainWallType"); assemblyInstanceHnd = IFCInstanceExporter.CreateCurtainWall(exporterIFC, element, guid, ownerHistory, localPlacement, representation, ifcEnumType); break; case IFCEntityType.IfcRamp: string rampPredefinedType = RampExporter.GetIFCRampType(ifcEnumType); //rampPredefinedType = IFCValidateEntry.GetValidIFCPredefinedType(element, rampPredefinedType, "IfcRampType"); assemblyInstanceHnd = IFCInstanceExporter.CreateRamp(exporterIFC, element, guid, ownerHistory, localPlacement, representation, rampPredefinedType); break; case IFCEntityType.IfcRoof: //string roofPredefinedType = IFCValidateEntry.GetValidIFCPredefinedType(element, ifcEnumType, "IfcRoofType"); assemblyInstanceHnd = IFCInstanceExporter.CreateRoof(exporterIFC, element, guid, ownerHistory, localPlacement, representation, ifcEnumType); break; case IFCEntityType.IfcStair: string stairPredefinedType = StairsExporter.GetIFCStairType(ifcEnumType); //stairPredefinedType = IFCValidateEntry.GetValidIFCPredefinedType(element, stairPredefinedType, "IfcStairType"); assemblyInstanceHnd = IFCInstanceExporter.CreateStair(exporterIFC, element, guid, ownerHistory, localPlacement, representation, stairPredefinedType); break; case IFCEntityType.IfcWall: //string wallPredefinedType = IFCValidateEntry.GetValidIFCPredefinedType(element, ifcEnumType, "IfcWallType"); assemblyInstanceHnd = IFCInstanceExporter.CreateWall(exporterIFC, element, guid, ownerHistory, localPlacement, representation, ifcEnumType); break; default: string objectType = NamingUtil.GetObjectTypeOverride(element, NamingUtil.GetFamilyAndTypeName(element)); IFCElementAssemblyType assemblyPredefinedType = GetPredefinedTypeFromObjectType(objectType); assemblyInstanceHnd = IFCInstanceExporter.CreateElementAssembly(exporterIFC, element, guid, ownerHistory, localPlacement, representation, IFCAssemblyPlace.NotDefined, assemblyPredefinedType); break; } } } if (assemblyInstanceHnd == null) { return(false); } // relateToLevel depends on how the AssemblyInstance is being mapped to IFC, above. productWrapper.AddElement(element, assemblyInstanceHnd, levelInfo, null, relateToLevel, exportAs); ExporterCacheManager.AssemblyInstanceCache.RegisterAssemblyInstance(element.Id, assemblyInstanceHnd); tr.Commit(); return(true); } }
/// <summary> /// Exports a roof or floor as a container of multiple roof slabs. Returns the handle, if successful. /// </summary> /// <param name="exporterIFC">The exporter.</param> /// <param name="ifcEnumType">The roof type.</param> /// <param name="element">The roof or floor element.</param> /// <param name="geometry">The geometry of the element.</param> /// <param name="productWrapper">The product wrapper.</param> /// <returns>The roof handle.</returns> /// <remarks>For floors, if there is only one component, return null, as we do not want to create a container.</remarks> public static IFCAnyHandle ExportRoofOrFloorAsContainer(ExporterIFC exporterIFC, string ifcEnumType, Element element, GeometryElement geometry, ProductWrapper productWrapper) { IFCFile file = exporterIFC.GetFile(); // We support ExtrusionRoofs, FootPrintRoofs, and Floors only. bool elementIsRoof = (element is ExtrusionRoof) || (element is FootPrintRoof); bool elementIsFloor = (element is Floor); if (!elementIsRoof && !elementIsFloor) { return(null); } using (IFCTransaction transaction = new IFCTransaction(file)) { using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element)) { IFCAnyHandle localPlacement = setter.LocalPlacement; IList <HostObjectSubcomponentInfo> hostObjectSubcomponents = null; try { hostObjectSubcomponents = ExporterIFCUtils.ComputeSubcomponents(element as HostObject); } catch { return(null); } if (hostObjectSubcomponents == null) { return(null); } int numSubcomponents = hostObjectSubcomponents.Count; if (numSubcomponents == 0 || (elementIsFloor && numSubcomponents == 1)) { return(null); } try { using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData()) { IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; extrusionCreationData.SetLocalPlacement(localPlacement); extrusionCreationData.ReuseLocalPlacement = true; using (TransformSetter trfSetter = TransformSetter.Create()) { IList <GeometryObject> geometryList = new List <GeometryObject>(); geometryList.Add(geometry); trfSetter.InitializeFromBoundingBox(exporterIFC, geometryList, extrusionCreationData); IFCAnyHandle prodRepHnd = null; string elementGUID = GUIDUtil.CreateGUID(element); string elementName = NamingUtil.GetIFCName(element); string elementDescription = NamingUtil.GetDescriptionOverride(element, null); string elementObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName()); string elementId = NamingUtil.CreateIFCElementId(element); string hostObjectType = IFCValidateEntry.GetValidIFCType(element, ifcEnumType); IFCAnyHandle hostObjectHandle = null; if (elementIsRoof) { hostObjectHandle = IFCInstanceExporter.CreateRoof(file, elementGUID, ownerHistory, elementName, elementDescription, elementObjectType, localPlacement, prodRepHnd, elementId, hostObjectType); } else { hostObjectHandle = IFCInstanceExporter.CreateSlab(file, elementGUID, ownerHistory, elementName, elementDescription, elementObjectType, localPlacement, prodRepHnd, elementId, hostObjectType); } if (IFCAnyHandleUtil.IsNullOrHasNoValue(hostObjectHandle)) { return(null); } IList <IFCAnyHandle> elementHandles = new List <IFCAnyHandle>(); elementHandles.Add(hostObjectHandle); // If element is floor, then the profile curve loop of hostObjectSubComponent is computed from the top face of the floor // else if element is roof, then the profile curve loop is taken from the bottom face of the roof instead XYZ extrusionDir = elementIsFloor ? new XYZ(0, 0, -1) : new XYZ(0, 0, 1); ElementId catId = CategoryUtil.GetSafeCategoryId(element); IList <IFCAnyHandle> slabHandles = new List <IFCAnyHandle>(); IList <CurveLoop> hostObjectOpeningLoops = new List <CurveLoop>(); double maximumScaledDepth = 0.0; using (IFCExtrusionCreationData slabExtrusionCreationData = new IFCExtrusionCreationData()) { slabExtrusionCreationData.SetLocalPlacement(extrusionCreationData.GetLocalPlacement()); slabExtrusionCreationData.ReuseLocalPlacement = false; slabExtrusionCreationData.ForceOffset = true; int loopNum = 0; int subElementStart = elementIsRoof ? (int)IFCRoofSubElements.RoofSlabStart : (int)IFCSlabSubElements.SubSlabStart; string subSlabType = elementIsRoof ? "ROOF" : hostObjectType; foreach (HostObjectSubcomponentInfo hostObjectSubcomponent in hostObjectSubcomponents) { trfSetter.InitializeFromBoundingBox(exporterIFC, geometryList, slabExtrusionCreationData); Plane plane = hostObjectSubcomponent.GetPlane(); Transform lcs = GeometryUtil.CreateTransformFromPlane(plane); IList <CurveLoop> curveLoops = new List <CurveLoop>(); CurveLoop slabCurveLoop = hostObjectSubcomponent.GetCurveLoop(); curveLoops.Add(slabCurveLoop); double slope = Math.Abs(plane.Normal.Z); double scaledDepth = UnitUtil.ScaleLength(hostObjectSubcomponent.Depth); double scaledExtrusionDepth = scaledDepth * slope; IFCAnyHandle shapeRep = ExtrusionExporter.CreateExtrudedSolidFromCurveLoop(exporterIFC, null, curveLoops, lcs, extrusionDir, scaledExtrusionDepth, false); if (IFCAnyHandleUtil.IsNullOrHasNoValue(shapeRep)) { return(null); } ElementId matId = HostObjectExporter.GetFirstLayerMaterialId(element as HostObject); BodyExporter.CreateSurfaceStyleForRepItem(exporterIFC, element.Document, shapeRep, matId); HashSet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>(); bodyItems.Add(shapeRep); shapeRep = RepresentationUtil.CreateSweptSolidRep(exporterIFC, element, catId, exporterIFC.Get3DContextHandle("Body"), bodyItems, null); IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>(); shapeReps.Add(shapeRep); IFCAnyHandle repHnd = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps); // Allow support for up to 256 named IfcSlab components, as defined in IFCSubElementEnums.cs. string slabGUID = (loopNum < 256) ? GUIDUtil.CreateSubElementGUID(element, subElementStart + loopNum) : GUIDUtil.CreateGUID(); IFCAnyHandle slabPlacement = ExporterUtil.CreateLocalPlacement(file, slabExtrusionCreationData.GetLocalPlacement(), null); IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, slabGUID, ownerHistory, elementName, elementDescription, elementObjectType, slabPlacement, repHnd, elementId, subSlabType); //slab quantities slabExtrusionCreationData.ScaledLength = scaledExtrusionDepth; slabExtrusionCreationData.ScaledArea = UnitUtil.ScaleArea(UnitUtil.ScaleArea(hostObjectSubcomponent.AreaOfCurveLoop)); slabExtrusionCreationData.ScaledOuterPerimeter = UnitUtil.ScaleLength(curveLoops[0].GetExactLength()); slabExtrusionCreationData.Slope = UnitUtil.ScaleAngle(MathUtil.SafeAcos(Math.Abs(slope))); productWrapper.AddElement(null, slabHnd, setter, slabExtrusionCreationData, false); elementHandles.Add(slabHnd); slabHandles.Add(slabHnd); hostObjectOpeningLoops.Add(slabCurveLoop); maximumScaledDepth = Math.Max(maximumScaledDepth, scaledDepth); loopNum++; } } productWrapper.AddElement(element, hostObjectHandle, setter, extrusionCreationData, true); ExporterUtil.RelateObjects(exporterIFC, null, hostObjectHandle, slabHandles); OpeningUtil.AddOpeningsToElement(exporterIFC, elementHandles, hostObjectOpeningLoops, element, null, maximumScaledDepth, null, setter, localPlacement, productWrapper); transaction.Commit(); return(hostObjectHandle); } } } finally { exporterIFC.ClearFaceWithElementHandleMap(); } } } }
/// <summary> /// Exports an element as building element proxy. /// </summary> /// <remarks> /// This function is called from the Export function, but can also be called directly if you do not /// want CreateInternalPropertySets to be called. /// </remarks> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> /// <returns>The handle if created, null otherwise.</returns> public static IFCAnyHandle ExportGenericElement(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper, IFCExportInfoPair exportType) { if (element == null || geometryElement == null) { return(null); } // Check the intended IFC entity or type name is in the exclude list specified in the UI if (exportType.ExportInstance == IFCEntityType.UnKnown) { exportType.SetValueWithPair(IFCEntityType.IfcBuildingElementProxy, exportType.ValidatedPredefinedType); } if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(exportType.ExportInstance)) { return(null); } // Check for containment override IFCAnyHandle overrideContainerHnd = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd); IFCFile file = exporterIFC.GetFile(); IFCAnyHandle instanceHandle = null; using (IFCTransaction tr = new IFCTransaction(file)) { using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ecData.SetLocalPlacement(placementSetter.LocalPlacement); ElementId categoryId = CategoryUtil.GetSafeCategoryId(element); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element, categoryId, geometryElement, bodyExporterOptions, null, ecData, true); if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation)) { ecData.ClearOpenings(); return(null); } string guid = GUIDUtil.CreateGUID(element); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; IFCAnyHandle localPlacement = ecData.GetLocalPlacement(); IFCAnyHandle styleHandle = null; instanceHandle = FamilyExporterUtil.ExportGenericInstance(exportType, exporterIFC, element, productWrapper, placementSetter, ecData, guid, ownerHistory, representation, exportType.ValidatedPredefinedType, null); if (exportType.ExportType != IFCEntityType.UnKnown) { if (element is FamilyInstance) { FamilySymbol familySymbol = (element as FamilyInstance).Symbol; if (familySymbol != null) { HashSet <IFCAnyHandle> propertySetsOpt = new HashSet <IFCAnyHandle>(); IList <IFCAnyHandle> repMapListOpt = new List <IFCAnyHandle>(); styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType, exportType.ValidatedPredefinedType, propertySetsOpt, repMapListOpt, element, familySymbol); } } if (IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle)) { styleHandle = ExporterUtil.CreateGenericTypeFromElement(element, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper); } } if (!IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle)) { productWrapper.AddElement(element, instanceHandle, placementSetter.LevelInfo, ecData, true, exportType); if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle)) { ExporterCacheManager.TypeRelationsCache.Add(styleHandle, instanceHandle); } } } tr.Commit(); } } return(instanceHandle); }
/// <summary> /// Exports a Rebar Coupler, /// </summary> /// <param name="exporterIFC">The exporter.</param> /// <param name="coupler">The RebarCoupler element.</param> /// <param name="productWrapper">The product wrapper.</param> public static void ExportCoupler(ExporterIFC exporterIFC, RebarCoupler coupler, ProductWrapper productWrapper) { if (coupler == null) { return; } FamilySymbol familySymbol = ExporterCacheManager.Document.GetElement(coupler.GetTypeId()) as FamilySymbol; if (familySymbol == null) { return; } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum; if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcMechanicalFastener", out elementClassTypeEnum)) { if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } } ElementId categoryId = CategoryUtil.GetSafeCategoryId(coupler); IFCFile file = exporterIFC.GetFile(); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; Options options = GeometryUtil.GetIFCExportGeometryOptions();; string ifcEnumType; IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, coupler, out ifcEnumType); using (IFCTransaction tr = new IFCTransaction(file)) { FamilyTypeInfo currentTypeInfo = ExporterCacheManager.FamilySymbolToTypeInfoCache.Find(coupler.GetTypeId(), false, exportType.ExportType); bool found = currentTypeInfo.IsValid(); if (!found) { string typeObjectType = NamingUtil.CreateIFCObjectName(exporterIFC, familySymbol); HashSet <IFCAnyHandle> propertySetsOpt = new HashSet <IFCAnyHandle>(); GeometryElement exportGeometry = familySymbol.get_Geometry(options); BodyData bodyData = null; BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); bodyData = BodyExporter.ExportBody(exporterIFC, coupler, categoryId, ElementId.InvalidElementId, exportGeometry, bodyExporterOptions, null); List <IFCAnyHandle> repMap = new List <IFCAnyHandle>(); IFCAnyHandle origin = ExporterUtil.CreateAxis2Placement3D(file);; repMap.Add(IFCInstanceExporter.CreateRepresentationMap(file, origin, bodyData.RepresentationHnd)); IFCAnyHandle styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType, ifcEnumType, propertySetsOpt, repMap, coupler, familySymbol); if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle)) { string applicableOccurrence = NamingUtil.GetObjectTypeOverride(familySymbol, typeObjectType); if (!string.IsNullOrEmpty(applicableOccurrence)) { IFCAnyHandleUtil.SetAttribute(styleHandle, "ApplicableOccurrence", applicableOccurrence); } currentTypeInfo.Style = styleHandle; ExporterCacheManager.FamilySymbolToTypeInfoCache.Register(coupler.GetTypeId(), false, exportType.ExportType, currentTypeInfo); } } int nCouplerQuantity = coupler.GetCouplerQuantity(); if (nCouplerQuantity <= 0) { return; } ISet <IFCAnyHandle> createdRebarCouplerHandles = new HashSet <IFCAnyHandle>(); string origInstanceName = NamingUtil.GetNameOverride(coupler, NamingUtil.GetIFCName(coupler)); for (int idx = 0; idx < nCouplerQuantity; idx++) { string instanceGUID = GUIDUtil.CreateSubElementGUID(coupler, idx); IFCAnyHandle style = currentTypeInfo.Style; if (IFCAnyHandleUtil.IsNullOrHasNoValue(style)) { return; } IList <IFCAnyHandle> repMapList = GeometryUtil.GetRepresentationMaps(style); if (repMapList == null) { return; } if (repMapList.Count == 0) { return; } IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>(); IFCAnyHandle contextOfItems3d = exporterIFC.Get3DContextHandle("Body"); ISet <IFCAnyHandle> representations = new HashSet <IFCAnyHandle>(); representations.Add(ExporterUtil.CreateDefaultMappedItem(file, repMapList[0], XYZ.Zero)); IFCAnyHandle shapeRep = RepresentationUtil.CreateBodyMappedItemRep(exporterIFC, coupler, categoryId, contextOfItems3d, representations); shapeReps.Add(shapeRep); IFCAnyHandle productRepresentation = IFCInstanceExporter.CreateProductDefinitionShape(exporterIFC.GetFile(), null, null, shapeReps); Transform trf = coupler.GetCouplerPositionTransform(idx); using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, coupler, trf, null)) { IFCAnyHandle instanceHandle = null; IFCExportInfoPair exportMechFastener = new IFCExportInfoPair(); exportMechFastener.SetValueWithPair(IFCEntityType.IfcMechanicalFastener); instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(exportMechFastener, exporterIFC, coupler, instanceGUID, ownerHistory, setter.LocalPlacement, productRepresentation); string instanceName = NamingUtil.GetNameOverride(instanceHandle, coupler, origInstanceName + ": " + idx); IFCAnyHandleUtil.SetAttribute(instanceHandle, "Name", instanceName); if (ExporterCacheManager.ExportOptionsCache.ExportAs4) { // In IFC4 NominalDiameter and NominalLength attributes have been deprecated. PredefinedType attribute was added. IFCAnyHandleUtil.SetAttribute(instanceHandle, "PredefinedType", Revit.IFC.Export.Toolkit.IFC4.IFCMechanicalFastenerType.USERDEFINED); } else { IFCAnyHandleUtil.SetAttribute(instanceHandle, "NominalDiameter", familySymbol.get_Parameter(BuiltInParameter.COUPLER_WIDTH).AsDouble()); IFCAnyHandleUtil.SetAttribute(instanceHandle, "NominalLength", familySymbol.get_Parameter(BuiltInParameter.COUPLER_LENGTH).AsDouble()); } createdRebarCouplerHandles.Add(instanceHandle); productWrapper.AddElement(coupler, instanceHandle, setter, null, true); } } string couplerGUID = GUIDUtil.CreateGUID(coupler); if (nCouplerQuantity > 1) { // Create a group to hold all of the created IFC entities, if the coupler aren't already in an assembly. // We want to avoid nested groups of groups of couplers. if (coupler.AssemblyInstanceId == ElementId.InvalidElementId) { string revitObjectType = exporterIFC.GetFamilyName(); string name = NamingUtil.GetNameOverride(coupler, revitObjectType); string description = NamingUtil.GetDescriptionOverride(coupler, null); string objectType = NamingUtil.GetObjectTypeOverride(coupler, revitObjectType); IFCAnyHandle rebarGroup = IFCInstanceExporter.CreateGroup(file, couplerGUID, ownerHistory, name, description, objectType); productWrapper.AddElement(coupler, rebarGroup); IFCInstanceExporter.CreateRelAssignsToGroup(file, GUIDUtil.CreateGUID(), ownerHistory, null, null, createdRebarCouplerHandles, null, rebarGroup); } } else { // We will update the GUID of the one created element to be the element GUID. // This will allow the IfcGUID parameter to be use/set if appropriate. ExporterUtil.SetGlobalId(createdRebarCouplerHandles.ElementAt(0), couplerGUID); } tr.Commit(); } }
/// <summary> /// Exports a gutter element. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void ExportGutter(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper) { // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcPipeSegmentType; if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { // Check for containment override IFCAnyHandle overrideContainerHnd = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd); using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ecData.SetLocalPlacement(setter.LocalPlacement); ElementId categoryId = CategoryUtil.GetSafeCategoryId(element); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); IFCAnyHandle bodyRep = BodyExporter.ExportBody(exporterIFC, element, categoryId, ElementId.InvalidElementId, geometryElement, bodyExporterOptions, ecData).RepresentationHnd; if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep)) { if (ecData != null) { ecData.ClearOpenings(); } return; } string originalTag = NamingUtil.CreateIFCElementId(element); // In Revit, we don't have a corresponding type, so we create one for every gutter. IFCAnyHandle origin = ExporterUtil.CreateAxis2Placement3D(file); IFCAnyHandle repMap3dHnd = IFCInstanceExporter.CreateRepresentationMap(file, origin, bodyRep); List <IFCAnyHandle> repMapList = new List <IFCAnyHandle>(); repMapList.Add(repMap3dHnd); string elementTypeName = NamingUtil.CreateIFCObjectName(exporterIFC, element); string typeGuid = GUIDUtil.CreateSubElementGUID(element, (int)IFCHostedSweepSubElements.PipeSegmentType); IFCAnyHandle style = IFCInstanceExporter.CreatePipeSegmentType(file, null, null, repMapList, IFCPipeSegmentType.Gutter); IFCAnyHandleUtil.OverrideNameAttribute(style, elementTypeName); IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcPipeSegmentType, IFCPipeSegmentType.Gutter.ToString()); IFCAnyHandleUtil.SetAttribute(style, "Tag", originalTag); ExporterUtil.SetGlobalId(style, typeGuid); IFCAnyHandleUtil.SetAttribute(style, "ElementType", elementTypeName); List <IFCAnyHandle> representationMaps = GeometryUtil.GetRepresentationMaps(style); IFCAnyHandle mappedItem = ExporterUtil.CreateDefaultMappedItem(file, representationMaps[0]); ISet <IFCAnyHandle> representations = new HashSet <IFCAnyHandle>(); representations.Add(mappedItem); IFCAnyHandle bodyMappedItemRep = RepresentationUtil.CreateBodyMappedItemRep(exporterIFC, element, categoryId, exporterIFC.Get3DContextHandle("Body"), representations); if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyMappedItemRep)) { return; } List <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>(); shapeReps.Add(bodyMappedItemRep); IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity); if (boundingBoxRep != null) { shapeReps.Add(boundingBoxRep); } IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps); IFCAnyHandle localPlacementToUse; ElementId roomId = setter.UpdateRoomRelativeCoordinates(element, out localPlacementToUse); if (roomId == ElementId.InvalidElementId) { localPlacementToUse = ecData.GetLocalPlacement(); } string guid = GUIDUtil.CreateGUID(element); IFCAnyHandle elemHnd = IFCInstanceExporter.CreateFlowSegment(exporterIFC, element, guid, ExporterCacheManager.OwnerHistoryHandle, localPlacementToUse, prodRep); bool containedInSpace = (roomId != ElementId.InvalidElementId); productWrapper.AddElement(element, elemHnd, setter.LevelInfo, ecData, !containedInSpace, exportInfo); if (containedInSpace) { ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomId, elemHnd); } // Associate segment with type. ExporterCacheManager.TypeRelationsCache.Add(style, elemHnd); OpeningUtil.CreateOpeningsIfNecessary(elemHnd, element, ecData, null, exporterIFC, localPlacementToUse, setter, productWrapper); } tr.Commit(); } } }
/// <summary> /// Export Curtain Walls and Roofs. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="allSubElements">Collection of elements contained in the host curtain element.</param> /// <param name="element">The element to be exported.</param> /// <param name="productWrapper">The ProductWrapper.</param> private static void ExportBase(ExporterIFC exporterIFC, ICollection <ElementId> allSubElements, Element element, ProductWrapper wrapper) { Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRoof; if (element is Wall || element is CurtainSystem || IsLegacyCurtainElement(element)) { elementClassTypeEnum = Common.Enums.IFCEntityType.IfcCurtainWall; } else if (element is RoofBase) { elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRoof; } if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } IFCFile file = exporterIFC.GetFile(); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; PlacementSetter setter = null; using (ProductWrapper curtainWallSubWrapper = ProductWrapper.Create(wrapper, false)) { try { Transform orientationTrf = Transform.Identity; IFCAnyHandle localPlacement = null; setter = PlacementSetter.Create(exporterIFC, element, null, orientationTrf); localPlacement = setter.LocalPlacement; string objectType = NamingUtil.CreateIFCObjectName(exporterIFC, element); IFCAnyHandle prodRepHnd = null; IFCAnyHandle elemHnd = null; string elemGUID = GUIDUtil.CreateGUID(element); if (element is Wall || element is CurtainSystem || IsLegacyCurtainElement(element)) { elemHnd = IFCInstanceExporter.CreateCurtainWall(exporterIFC, element, elemGUID, ownerHistory, localPlacement, prodRepHnd, null); } else if (element is RoofBase) { //need to convert the string to enum string ifcEnumType = ExporterUtil.GetIFCTypeFromExportTable(exporterIFC, element); //ifcEnumType = IFCValidateEntry.GetValidIFCPredefinedType(element, ifcEnumType); elemHnd = IFCInstanceExporter.CreateRoof(exporterIFC, element, elemGUID, ownerHistory, localPlacement, prodRepHnd, ifcEnumType); } else { return; } if (IFCAnyHandleUtil.IsNullOrHasNoValue(elemHnd)) { return; } wrapper.AddElement(element, elemHnd, setter, null, true); bool canExportCurtainWallAsContainer = CanExportCurtainWallAsContainer(allSubElements, element.Document); IFCAnyHandle rep = null; if (!canExportCurtainWallAsContainer) { rep = ExportCurtainObjectCommonAsOneBRep(allSubElements, element, exporterIFC, setter, localPlacement); if (IFCAnyHandleUtil.IsNullOrHasNoValue(rep)) { return; } } else { ExportCurtainObjectCommonAsContainer(allSubElements, element, exporterIFC, curtainWallSubWrapper, setter); } ICollection <IFCAnyHandle> relatedElementIds = curtainWallSubWrapper.GetAllObjects(); if (relatedElementIds.Count > 0) { string guid = GUIDUtil.CreateSubElementGUID(element, (int)IFCCurtainWallSubElements.RelAggregates); HashSet <IFCAnyHandle> relatedElementIdSet = new HashSet <IFCAnyHandle>(relatedElementIds); IFCInstanceExporter.CreateRelAggregates(file, guid, ownerHistory, null, null, elemHnd, relatedElementIdSet); } ExportCurtainWallType(exporterIFC, wrapper, elemHnd, element); SpaceBoundingElementUtil.RegisterSpaceBoundingElementHandle(exporterIFC, elemHnd, element.Id, ElementId.InvalidElementId); } finally { if (setter != null) { setter.Dispose(); } } } }
/// <summary> /// Exports an element as an IfcReinforcingMesh. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> /// <returns>True if exported successfully, false otherwise.</returns> public static bool ExportFabricSheet(ExporterIFC exporterIFC, FabricSheet sheet, GeometryElement geometryElement, ProductWrapper productWrapper) { if (sheet == null || geometryElement == null) { return(false); } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcReinforcingMesh; if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return(false); } Document doc = sheet.Document; IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { // Check for containment override IFCAnyHandle overrideContainerHnd = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, sheet, out overrideContainerHnd); using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, sheet, null, null, overrideContainerId, overrideContainerHnd)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ecData.SetLocalPlacement(placementSetter.LocalPlacement); ElementId categoryId = CategoryUtil.GetSafeCategoryId(sheet); ElementId materialId = ElementId.InvalidElementId; ParameterUtil.GetElementIdValueFromElementOrSymbol(sheet, BuiltInParameter.MATERIAL_ID_PARAM, out materialId); string guid = GUIDUtil.CreateGUID(sheet); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; string revitObjectType = NamingUtil.GetFamilyAndTypeName(sheet); IFCAnyHandle localPlacement = ecData.GetLocalPlacement(); string steelGrade = NamingUtil.GetOverrideStringValue(sheet, "SteelGrade", null); double?meshLength = sheet.CutOverallLength; double?meshWidth = sheet.CutOverallWidth; Element fabricSheetTypeElem = doc.GetElement(sheet.GetTypeId()); FabricSheetType fabricSheetType = (fabricSheetTypeElem == null) ? null : (fabricSheetTypeElem as FabricSheetType); double longitudinalBarNominalDiameter = 0.0; double transverseBarNominalDiameter = 0.0; double longitudinalBarCrossSectionArea = 0.0; double transverseBarCrossSectionArea = 0.0; double longitudinalBarSpacing = 0.0; double transverseBarSpacing = 0.0; if (fabricSheetType != null) { Element majorFabricWireTypeElem = doc.GetElement(fabricSheetType.MajorDirectionWireType); FabricWireType majorFabricWireType = (majorFabricWireTypeElem == null) ? null : (majorFabricWireTypeElem as FabricWireType); if (majorFabricWireType != null) { longitudinalBarNominalDiameter = UnitUtil.ScaleLength(majorFabricWireType.WireDiameter); double localRadius = longitudinalBarNominalDiameter / 2.0; longitudinalBarCrossSectionArea = localRadius * localRadius * Math.PI; } Element minorFabricWireTypeElem = doc.GetElement(fabricSheetType.MinorDirectionWireType); FabricWireType minorFabricWireType = (minorFabricWireTypeElem == null) ? null : (minorFabricWireTypeElem as FabricWireType); if (minorFabricWireType != null) { transverseBarNominalDiameter = UnitUtil.ScaleLength(minorFabricWireType.WireDiameter); double localRadius = transverseBarNominalDiameter / 2.0; transverseBarCrossSectionArea = localRadius * localRadius * Math.PI; } longitudinalBarSpacing = UnitUtil.ScaleLength(fabricSheetType.MajorSpacing); transverseBarSpacing = UnitUtil.ScaleLength(fabricSheetType.MinorSpacing); } ISet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>(); IList <Curve> wireCenterlines = sheet.GetWireCenterlines(WireDistributionDirection.Major); foreach (Curve wireCenterline in wireCenterlines) { IFCAnyHandle bodyItem = GeometryUtil.CreateSweptDiskSolid(exporterIFC, file, wireCenterline, longitudinalBarNominalDiameter, null); if (!IFCAnyHandleUtil.IsNullOrHasNoValue(bodyItem)) { bodyItems.Add(bodyItem); } } wireCenterlines = sheet.GetWireCenterlines(WireDistributionDirection.Minor); foreach (Curve wireCenterline in wireCenterlines) { IFCAnyHandle bodyItem = GeometryUtil.CreateSweptDiskSolid(exporterIFC, file, wireCenterline, transverseBarNominalDiameter, null); if (!IFCAnyHandleUtil.IsNullOrHasNoValue(bodyItem)) { bodyItems.Add(bodyItem); } } IFCAnyHandle shapeRep = (bodyItems.Count > 0) ? RepresentationUtil.CreateAdvancedSweptSolidRep(exporterIFC, sheet, categoryId, exporterIFC.Get3DContextHandle("Body"), bodyItems, null) : null; IList <IFCAnyHandle> shapeReps = null; if (shapeRep != null) { shapeReps = new List <IFCAnyHandle>(); shapeReps.Add(shapeRep); } IFCAnyHandle prodRep = (shapeReps != null) ? IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps) : null; IFCAnyHandle fabricSheet = IFCInstanceExporter.CreateReinforcingMesh(exporterIFC, sheet, guid, ownerHistory, localPlacement, prodRep, steelGrade, meshLength, meshWidth, longitudinalBarNominalDiameter, transverseBarNominalDiameter, longitudinalBarCrossSectionArea, transverseBarCrossSectionArea, longitudinalBarSpacing, transverseBarSpacing); IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcReinforcingMesh); ElementId fabricAreaId = sheet.FabricAreaOwnerId; if (fabricAreaId != ElementId.InvalidElementId) { HashSet <IFCAnyHandle> fabricSheets = null; if (!ExporterCacheManager.FabricAreaHandleCache.TryGetValue(fabricAreaId, out fabricSheets)) { fabricSheets = new HashSet <IFCAnyHandle>(); ExporterCacheManager.FabricAreaHandleCache[fabricAreaId] = fabricSheets; } fabricSheets.Add(fabricSheet); } productWrapper.AddElement(sheet, fabricSheet, placementSetter.LevelInfo, ecData, true, exportInfo); CategoryUtil.CreateMaterialAssociation(exporterIFC, fabricSheet, materialId); } } tr.Commit(); return(true); } }
/// <summary> /// Export the individual part (IfcBuildingElementPart). /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="partElement">The part element to export.</param> /// <param name="geometryElement">The geometry of part.</param> /// <param name="productWrapper">The ProductWrapper object.</param> public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper, PlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes, Element hostElement, ElementId overrideLevelId, bool asBuildingElement) { if (!ElementFilteringUtil.IsElementVisible(partElement)) { return; } Part part = partElement as Part; if (part == null) { return; } if (!asBuildingElement) { // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum; if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcBuildingElementPart", out elementClassTypeEnum)) { if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } } } else { string ifcEnumType = null; IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType); // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum; if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum)) { if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } } } PlacementSetter standalonePlacementSetter = null; bool standaloneExport = hostElement == null && !asBuildingElement; ElementId partExportLevel = null; if (standaloneExport || asBuildingElement) { partExportLevel = partElement.LevelId; } else { if (part.OriginalCategoryId != hostElement.Category.Id) { return; } partExportLevel = hostElement.LevelId; } if (overrideLevelId != null) { partExportLevel = overrideLevelId; } if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevel)) { return; } Options options = GeometryUtil.GetIFCExportGeometryOptions(); View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View; if (ownerView != null) { options.View = ownerView; } GeometryElement geometryElement = partElement.get_Geometry(options); if (geometryElement == null) { return; } try { IFCFile file = exporterIFC.GetFile(); using (IFCTransaction transaction = new IFCTransaction(file)) { IFCAnyHandle partPlacement = null; if (standaloneExport || asBuildingElement) { Transform orientationTrf = Transform.Identity; standalonePlacementSetter = PlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevel); partPlacement = standalonePlacementSetter.LocalPlacement; } else { partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null); } bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End)); SolidMeshGeometryInfo solidMeshInfo; if (validRange) { solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range); if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0) { return; } } else { solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement); } using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData()) { extrusionCreationData.SetLocalPlacement(partPlacement); extrusionCreationData.ReuseLocalPlacement = false; extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes; IList <Solid> solids = solidMeshInfo.GetSolids(); IList <Mesh> meshes = solidMeshInfo.GetMeshes(); ElementId catId = CategoryUtil.GetSafeCategoryId(partElement); ElementId hostCatId = CategoryUtil.GetSafeCategoryId(hostElement); BodyData bodyData = null; BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); if (solids.Count > 0 || meshes.Count > 0) { bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes, bodyExporterOptions, extrusionCreationData); } else { IList <GeometryObject> geomlist = new List <GeometryObject>(); geomlist.Add(geometryElement); bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist, bodyExporterOptions, extrusionCreationData); } IFCAnyHandle bodyRep = bodyData.RepresentationHnd; if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep)) { extrusionCreationData.ClearOpenings(); return; } IList <IFCAnyHandle> representations = new List <IFCAnyHandle>(); representations.Add(bodyRep); IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity); if (boundingBoxRep != null) { representations.Add(boundingBoxRep); } IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; string partGUID = GUIDUtil.CreateGUID(partElement); string partName = NamingUtil.GetNameOverride(partElement, NamingUtil.GetIFCName(partElement)); string partDescription = NamingUtil.GetDescriptionOverride(partElement, null); string partObjectType = NamingUtil.GetObjectTypeOverride(partElement, NamingUtil.CreateIFCObjectName(exporterIFC, partElement)); string partTag = NamingUtil.GetTagOverride(partElement, NamingUtil.CreateIFCElementId(partElement)); IFCAnyHandle ifcPart = null; if (!asBuildingElement) { ifcPart = IFCInstanceExporter.CreateBuildingElementPart(file, partGUID, ownerHistory, partName, partDescription, partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag); } else { string ifcEnumType = null; IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType); string defaultValue = null; // This replicates old functionality before IFC4 addition, where the default for slab was "FLOOR". // Really the export layer table should be fixed for this case. if (string.IsNullOrWhiteSpace(ifcEnumType) && hostCatId == new ElementId(BuiltInCategory.OST_Floors)) { ifcEnumType = "FLOOR"; } ifcEnumType = IFCValidateEntry.GetValidIFCType(hostElement, ifcEnumType, defaultValue); switch (exportType) { case IFCExportType.IfcColumnType: ifcPart = IFCInstanceExporter.CreateColumn(file, partGUID, ownerHistory, partName, partDescription, partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType); break; case IFCExportType.IfcCovering: ifcPart = IFCInstanceExporter.CreateCovering(file, partGUID, ownerHistory, partName, partDescription, partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType); break; case IFCExportType.IfcFooting: ifcPart = IFCInstanceExporter.CreateFooting(file, partGUID, ownerHistory, partName, partDescription, partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType); break; case IFCExportType.IfcPile: ifcPart = IFCInstanceExporter.CreatePile(file, partGUID, ownerHistory, partName, partDescription, partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType, null); break; case IFCExportType.IfcRoof: ifcPart = IFCInstanceExporter.CreateRoof(file, partGUID, ownerHistory, partName, partDescription, partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType); break; case IFCExportType.IfcSlab: ifcPart = IFCInstanceExporter.CreateSlab(file, partGUID, ownerHistory, partName, partDescription, partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType); break; case IFCExportType.IfcWall: ifcPart = IFCInstanceExporter.CreateWall(file, partGUID, ownerHistory, partName, partDescription, partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType); break; default: ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(file, partGUID, ownerHistory, partName, partDescription, partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, null); break; } } bool containedInLevel = (standaloneExport || asBuildingElement); PlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter; productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel); OpeningUtil.CreateOpeningsIfNecessary(ifcPart, partElement, extrusionCreationData, bodyData.OffsetTransform, exporterIFC, extrusionCreationData.GetLocalPlacement(), whichPlacementSetter, productWrapper); //Add the exported part to exported cache. TraceExportedParts(partElement, partExportLevel, standaloneExport || asBuildingElement ? ElementId.InvalidElementId : hostElement.Id); CategoryUtil.CreateMaterialAssociation(exporterIFC, ifcPart, bodyData.MaterialIds); transaction.Commit(); } } } finally { if (standalonePlacementSetter != null) { standalonePlacementSetter.Dispose(); } } }
/// <summary> /// Exports an element to IFC footing. /// </summary> /// <param name="exporterIFC"> /// The ExporterIFC object. /// </param> /// <param name="element"> /// The element. /// </param> /// <param name="geometryElement"> /// The geometry element. /// </param> /// <param name="ifcEnumType"> /// The string value represents the IFC type. /// </param> /// <param name="productWrapper"> /// The ProductWrapper. /// </param> public static void ExportFooting(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, string ifcEnumType, ProductWrapper productWrapper) { // export parts or not bool exportParts = PartExporter.CanExportParts(element); if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false)) { return; } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum; if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcFooting", out elementClassTypeEnum)) { if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ecData.SetLocalPlacement(setter.LocalPlacement); IFCAnyHandle prodRep = null; ElementId matId = ElementId.InvalidElementId; if (!exportParts) { ElementId catId = CategoryUtil.GetSafeCategoryId(element); matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element, catId, geometryElement, bodyExporterOptions, null, ecData, true); if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep)) { ecData.ClearOpenings(); return; } } string instanceGUID = GUIDUtil.CreateGUID(element); string footingType = GetIFCFootingType(ifcEnumType); // need to keep it for legacy support when original data follows slightly diff naming footingType = IFCValidateEntry.GetValidIFCType(element, footingType); IFCAnyHandle footing = IFCInstanceExporter.CreateFooting(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle, ecData.GetLocalPlacement(), prodRep, footingType); if (exportParts) { PartExporter.ExportHostPart(exporterIFC, element, footing, productWrapper, setter, setter.LocalPlacement, null); } else { if (matId != ElementId.InvalidElementId) { CategoryUtil.CreateMaterialAssociation(exporterIFC, footing, matId); } } productWrapper.AddElement(element, footing, setter, ecData, true); OpeningUtil.CreateOpeningsIfNecessary(footing, element, ecData, null, exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper); } } tr.Commit(); } }
/// <summary> /// Exports text note elements. /// </summary> /// <param name="exporterIFC"> /// The ExporterIFC object. /// </param> /// <param name="textNote"> /// The text note element. /// </param> /// <param name="productWrapper"> /// The ProductWrapper. /// </param> public static void Export(ExporterIFC exporterIFC, TextNote textNote, ProductWrapper productWrapper) { // Check the intended IFC entity or type name is in the exclude list specified in the UI string predefinedType = null; IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, textNote, out predefinedType); if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(exportType.ExportInstance)) { return; } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { string textString = textNote.Text; if (String.IsNullOrEmpty(textString)) { throw new Exception("TextNote does not have test string."); } ElementId symId = textNote.GetTypeId(); if (symId == ElementId.InvalidElementId) { throw new Exception("TextNote does not have valid type id."); } PresentationStyleAssignmentCache cache = ExporterCacheManager.PresentationStyleAssignmentCache; IFCAnyHandle presHnd = cache.Find(symId); if (IFCAnyHandleUtil.IsNullOrHasNoValue(presHnd)) { TextElementType textElemType = textNote.Symbol; CreatePresentationStyleAssignmentForTextElementType(exporterIFC, textElemType, cache); presHnd = cache.Find(symId); if (IFCAnyHandleUtil.IsNullOrHasNoValue(presHnd)) { throw new Exception("Failed to create presentation style assignment for TextElementType."); } } HashSet <IFCAnyHandle> presHndSet = new HashSet <IFCAnyHandle>(); presHndSet.Add(presHnd); using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, textNote)) { const double planScale = 100.0; // currently hardwired. XYZ orig = UnitUtil.ScaleLength(textNote.Coord); XYZ yDir = textNote.UpDirection; XYZ xDir = textNote.BaseDirection; XYZ zDir = xDir.CrossProduct(yDir); double sizeX = UnitUtil.ScaleLength(textNote.Width * planScale); double sizeY = UnitUtil.ScaleLength(textNote.Height * planScale); // When we display text on screen, we "flip" it if the xDir is negative with relation to // the X-axis. So if it is, we'll flip x and y. bool flipOrig = false; if (xDir.X < 0) { xDir = xDir.Multiply(-1.0); yDir = yDir.Multiply(-1.0); flipOrig = true; } // xFactor, yFactor only used if flipOrig. double xFactor = 0.0, yFactor = 0.0; string boxAlignment = ConvertTextNoteAlignToBoxAlign(textNote, out xFactor, out yFactor); // modify the origin to match the alignment. In Revit, the origin is at the top-left (unless flipped, // then bottom-right). if (flipOrig) { orig = orig.Add(xDir.Multiply(sizeX * xFactor)); orig = orig.Add(yDir.Multiply(sizeY * yFactor)); } IFCAnyHandle origin = ExporterUtil.CreateAxis(file, orig, zDir, xDir); IFCAnyHandle extent = IFCInstanceExporter.CreatePlanarExtent(file, sizeX, sizeY); IFCAnyHandle repItemHnd = IFCInstanceExporter.CreateTextLiteralWithExtent(file, textString, origin, Toolkit.IFCTextPath.Left, extent, boxAlignment); IFCAnyHandle annoTextOccHnd = IFCInstanceExporter.CreateStyledItem(file, repItemHnd, presHndSet, null); ElementId catId = textNote.Category != null ? textNote.Category.Id : ElementId.InvalidElementId; HashSet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>(); bodyItems.Add(repItemHnd); IFCAnyHandle bodyRepHnd = RepresentationUtil.CreateAnnotationSetRep(exporterIFC, textNote, catId, exporterIFC.Get2DContextHandle(), bodyItems); if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRepHnd)) { throw new Exception("Failed to create shape representation."); } IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>(); shapeReps.Add(bodyRepHnd); IFCAnyHandle prodShapeHnd = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps); IFCAnyHandle instHnd; if (exportType.ExportInstance == Common.Enums.IFCEntityType.IfcAnnotation) { instHnd = IFCInstanceExporter.CreateAnnotation(exporterIFC, textNote, GUIDUtil.CreateGUID(), ExporterCacheManager.OwnerHistoryHandle, setter.LocalPlacement, prodShapeHnd); } else { instHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, textNote, GUIDUtil.CreateGUID(), ExporterCacheManager.OwnerHistoryHandle, setter.LocalPlacement, prodShapeHnd); } productWrapper.AddAnnotation(instHnd, setter.LevelInfo, true); } tr.Commit(); } }
/// <summary> /// Exports a Rebar to IFC ReinforcingBar. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="rebarItem">The rebar to be exported. This might be an element or a sub-element.</param> /// <param name="rebarElement">The element that contains the rebar to be exported. This may be the same as rebarItem.</param> /// <param name="itemIndex">If greater than 0, the index of the first rebar in the rebarItem in the rebarElement, used for naming and GUID creation.</param> /// <param name="productWrapper">The ProductWrapper object.</param> /// <returns>The set of handles created, to add to the ProductWrapper in the calling function.</returns> private static ISet <DelayedProductWrapper> ExportRebar(ExporterIFC exporterIFC, object rebarItem, Element rebarElement, int itemIndex, ProductWrapper productWrapper) { // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum; if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcReinforcingBar", out elementClassTypeEnum)) { if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return(null); } } IFCFile file = exporterIFC.GetFile(); HashSet <DelayedProductWrapper> createdRebars = new HashSet <DelayedProductWrapper>(); int rebarQuantity = GetRebarQuantity(rebarItem); if (rebarQuantity == 0) { return(null); } using (IFCTransaction transaction = new IFCTransaction(file)) { using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, rebarElement)) { bool cannotExportRebar = false; IFCAnyHandle rebarHandle = ExportRebarAsProxyElementInView(exporterIFC, rebarElement, productWrapper, out cannotExportRebar); if (!IFCAnyHandleUtil.IsNullOrHasNoValue(rebarHandle) || cannotExportRebar) { if (!cannotExportRebar) { transaction.Commit(); } return(null); // Rebar doesn't create a group. } IFCAnyHandle prodRep = null; double totalBarLengthUnscale = GetRebarTotalLength(rebarItem); double volumeUnscale = GetRebarVolume(rebarItem); double totalBarLength = UnitUtil.ScaleLength(totalBarLengthUnscale); if (MathUtil.IsAlmostZero(totalBarLength)) { return(null); } ElementId materialId = ElementId.InvalidElementId; ParameterUtil.GetElementIdValueFromElementOrSymbol(rebarElement, BuiltInParameter.MATERIAL_ID_PARAM, out materialId); double diameter = GetBarDiameter(rebarItem); double radius = diameter / 2.0; double longitudinalBarNominalDiameter = diameter; double longitudinalBarCrossSectionArea = UnitUtil.ScaleArea(volumeUnscale / totalBarLengthUnscale); int numberOfBarPositions = GetNumberOfBarPositions(rebarItem); string steelGrade = NamingUtil.GetOverrideStringValue(rebarElement, "SteelGrade", null); // Allow use of IFC2x3 or IFC4 naming. string predefinedType = NamingUtil.GetOverrideStringValue(rebarElement, "BarRole", null); if (string.IsNullOrWhiteSpace(predefinedType)) { predefinedType = NamingUtil.GetOverrideStringValue(rebarElement, "PredefinedType", null); } IFCReinforcingBarRole role = GetReinforcingBarRole(predefinedType); string origRebarName = NamingUtil.GetNameOverride(rebarElement, NamingUtil.GetIFCName(rebarElement)); const int maxBarGUIDS = IFCReinforcingBarSubElements.BarEnd - IFCReinforcingBarSubElements.BarStart + 1; ElementId categoryId = CategoryUtil.GetSafeCategoryId(rebarElement); IFCAnyHandle originalPlacement = setter.LocalPlacement; // Potential issue : totalBarLength has a rounded value but individual lengths (from centerlines) do not have rounded values. // Also dividing a rounded totalBarLength does not result in barLength rounded by the same round value. double barLength = totalBarLength / rebarQuantity; IList <Curve> baseCurves = GetRebarCenterlineCurves(rebarItem, true, false, false); ElementId barLengthParamId = new ElementId(BuiltInParameter.REBAR_ELEM_LENGTH); ParameterSet rebarElementParams = rebarElement.Parameters; for (int ii = 0; ii < numberOfBarPositions; ii++) { if (!DoesBarExistAtPosition(rebarItem, ii)) { continue; } Rebar rebar = rebarElement as Rebar; if ((rebar != null) && (rebar.DistributionType == DistributionType.VaryingLength || rebar.IsRebarFreeForm())) { baseCurves = GetRebarCenterlineCurves(rebar, true, false, false, MultiplanarOption.IncludeOnlyPlanarCurves, ii); DoubleParameterValue barLengthParamVal = rebar.GetParameterValueAtIndex(barLengthParamId, ii) as DoubleParameterValue; if (barLengthParamVal != null) { barLength = barLengthParamVal.Value; } } int indexForNamingAndGUID = (itemIndex > 0) ? ii + itemIndex : ii + 1; string rebarName = NamingUtil.GetNameOverride(rebarElement, origRebarName + ": " + indexForNamingAndGUID); Transform barTrf = GetBarPositionTransform(rebarItem, ii); IList <Curve> curves = new List <Curve>(); double endParam = 0.0; foreach (Curve baseCurve in baseCurves) { if (baseCurve is Arc || baseCurve is Ellipse) { if (baseCurve.IsBound) { endParam += UnitUtil.ScaleAngle(baseCurve.GetEndParameter(1) - baseCurve.GetEndParameter(0)); } else { endParam += UnitUtil.ScaleAngle(2 * Math.PI); } } else { endParam += 1.0; } curves.Add(baseCurve.CreateTransformed(barTrf)); } IFCAnyHandle compositeCurve = GeometryUtil.CreateCompositeCurve(exporterIFC, curves); IFCAnyHandle sweptDiskSolid = IFCInstanceExporter.CreateSweptDiskSolid(file, compositeCurve, radius, null, 0, endParam); HashSet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>(); bodyItems.Add(sweptDiskSolid); IFCAnyHandle shapeRep = RepresentationUtil.CreateAdvancedSweptSolidRep(exporterIFC, rebarElement, categoryId, exporterIFC.Get3DContextHandle("Body"), bodyItems, null); IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>(); shapeReps.Add(shapeRep); prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps); IFCAnyHandle copyLevelPlacement = (ii == 0) ? originalPlacement : ExporterUtil.CopyLocalPlacement(file, originalPlacement); string rebarGUID = (indexForNamingAndGUID < maxBarGUIDS) ? GUIDUtil.CreateSubElementGUID(rebarElement, indexForNamingAndGUID + (int)IFCReinforcingBarSubElements.BarStart - 1) : GUIDUtil.CreateGUID(); IFCAnyHandle elemHnd = IFCInstanceExporter.CreateReinforcingBar(exporterIFC, rebarElement, rebarGUID, ExporterCacheManager.OwnerHistoryHandle, copyLevelPlacement, prodRep, steelGrade, longitudinalBarNominalDiameter, longitudinalBarCrossSectionArea, barLength, role, null); IFCAnyHandleUtil.SetAttribute(elemHnd, "Name", rebarName); // We will not add the element ot the productWrapper here, but instead in the function that calls // ExportRebar. The reason for this is that we don't currently know if the handles such be associated // to the level or not, depending on whether they will or won't be grouped. createdRebars.Add(new DelayedProductWrapper(rebarElement, elemHnd, setter.LevelInfo)); CacheSubelementParameterValues(rebarElement, rebarElementParams, ii, elemHnd); ExporterCacheManager.HandleToElementCache.Register(elemHnd, rebarElement.Id); CategoryUtil.CreateMaterialAssociation(exporterIFC, elemHnd, materialId); } } transaction.Commit(); } return(createdRebars); }
/// <summary> /// Exports a generic element as an IfcSlab.</summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="floor">The floor element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="ifcEnumType">The string value represents the IFC type.</param> /// <param name="productWrapper">The ProductWrapper.</param> /// <returns>True if the floor is exported successfully, false otherwise.</returns> public static void ExportGenericSlab(ExporterIFC exporterIFC, Element slabElement, GeometryElement geometryElement, string ifcEnumType, ProductWrapper productWrapper) { if (geometryElement == null) { return; } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { using (IFCTransformSetter transformSetter = IFCTransformSetter.Create()) { using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, slabElement)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { bool exportParts = PartExporter.CanExportParts(slabElement); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; IFCAnyHandle localPlacement = placementSetter.LocalPlacement; IFCAnyHandle prodDefHnd = null; bool isBRepSlabHnd = false; if (!exportParts) { ecData.SetLocalPlacement(localPlacement); ElementId catId = CategoryUtil.GetSafeCategoryId(slabElement); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium); BodyData bodyData; prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, slabElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData); if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd)) { ecData.ClearOpenings(); return; } isBRepSlabHnd = (bodyData.ShapeRepresentationType == ShapeRepresentationType.Brep); } // Create the slab from either the extrusion or the BRep information. string ifcGUID = GUIDUtil.CreateGUID(slabElement); string entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(slabElement, ifcEnumType, "FLOOR"); string ifcName = NamingUtil.GetNameOverride(slabElement, NamingUtil.GetIFCName(slabElement)); string ifcDescription = NamingUtil.GetDescriptionOverride(slabElement, null); string ifcObjectType = NamingUtil.GetObjectTypeOverride(slabElement, exporterIFC.GetFamilyName()); string ifcTag = NamingUtil.GetTagOverride(slabElement, NamingUtil.CreateIFCElementId(slabElement)); IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, ifcGUID, ownerHistory, ifcName, ifcDescription, ifcObjectType, localPlacement, exportParts ? null : prodDefHnd, ifcTag, entityType); if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd)) { return; } if (exportParts) { PartExporter.ExportHostPart(exporterIFC, slabElement, slabHnd, productWrapper, placementSetter, localPlacement, null); } productWrapper.AddElement(slabElement, slabHnd, placementSetter, ecData, true); if (!exportParts) { if (slabElement is HostObject) { HostObject hostObject = slabElement as HostObject; HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, slabHnd, geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, isBRepSlabHnd); } else if (slabElement is FamilyInstance) { ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, slabElement); Document doc = slabElement.Document; CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, matId); } OpeningUtil.CreateOpeningsIfNecessary(slabHnd, slabElement, ecData, null, exporterIFC, ecData.GetLocalPlacement(), placementSetter, productWrapper); } } } tr.Commit(); return; } } }
/// <summary> /// Exports an element as a covering of type insulation. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> /// <returns>True if exported successfully, false otherwise.</returns> public static bool ExportDuctLining(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper) { if (element == null || geometryElement == null) { return(false); } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcCovering; if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return(false); } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { // Check for containment override IFCAnyHandle overrideContainer = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainer); using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainer)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ecData.SetLocalPlacement(placementSetter.LocalPlacement); ElementId categoryId = CategoryUtil.GetSafeCategoryId(element); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element, categoryId, geometryElement, bodyExporterOptions, null, ecData, true); if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation)) { ecData.ClearOpenings(); return(false); } string guid = GUIDUtil.CreateGUID(element); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; IFCAnyHandle localPlacement = ecData.GetLocalPlacement(); string ifcType = "Wrapping"; IFCAnyHandle ductLining = IFCInstanceExporter.CreateCovering(exporterIFC, element, guid, ownerHistory, localPlacement, representation, ifcType); ExporterCacheManager.ElementToHandleCache.Register(element.Id, ductLining); IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcCovering, ifcType); productWrapper.AddElement(element, ductLining, placementSetter.LevelInfo, ecData, true, exportInfo); ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, element); CategoryUtil.CreateMaterialAssociation(exporterIFC, ductLining, matId); } } tr.Commit(); return(true); } }
/// <summary> /// Exports a ramp to IfcRamp, without decomposing into separate runs and landings. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="ifcEnumType">The ramp type.</param> /// <param name="ramp">The ramp element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="numFlights">The number of flights for a multistory ramp.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void ExportRamp(ExporterIFC exporterIFC, string ifcEnumType, Element ramp, GeometryElement geometryElement, int numFlights, ProductWrapper productWrapper) { if (ramp == null || geometryElement == null) { return; } IFCFile file = exporterIFC.GetFile(); using (IFCTransaction tr = new IFCTransaction(file)) { using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, ramp)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ecData.SetLocalPlacement(placementSetter.LocalPlacement); ecData.ReuseLocalPlacement = false; GeometryElement rampGeom = GeometryUtil.GetOneLevelGeometryElement(geometryElement, numFlights); BodyData bodyData; ElementId categoryId = CategoryUtil.GetSafeCategoryId(ramp); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(); IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, ramp, categoryId, rampGeom, bodyExporterOptions, null, ecData, out bodyData); if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation)) { ecData.ClearOpenings(); return; } string containedRampGuid = GUIDUtil.CreateSubElementGUID(ramp, (int)IFCRampSubElements.ContainedRamp); IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle(); string rampName = NamingUtil.GetNameOverride(ramp, NamingUtil.GetIFCName(ramp)); string rampDescription = NamingUtil.GetDescriptionOverride(ramp, null); string rampObjectType = NamingUtil.GetObjectTypeOverride(ramp, NamingUtil.CreateIFCObjectName(exporterIFC, ramp)); IFCAnyHandle containedRampLocalPlacement = ExporterUtil.CreateLocalPlacement(file, ecData.GetLocalPlacement(), null); string elementTag = NamingUtil.GetTagOverride(ramp, NamingUtil.CreateIFCElementId(ramp)); string rampType = GetIFCRampType(ifcEnumType); List <IFCAnyHandle> components = new List <IFCAnyHandle>(); IList <IFCExtrusionCreationData> componentExtrusionData = new List <IFCExtrusionCreationData>(); IFCAnyHandle containedRampHnd = IFCInstanceExporter.CreateRamp(file, containedRampGuid, ownerHistory, rampName, rampDescription, rampObjectType, containedRampLocalPlacement, representation, elementTag, rampType); components.Add(containedRampHnd); componentExtrusionData.Add(ecData); //productWrapper.AddElement(containedRampHnd, placementSetter.LevelInfo, ecData, false); CategoryUtil.CreateMaterialAssociations(exporterIFC, containedRampHnd, bodyData.MaterialIds); string guid = GUIDUtil.CreateGUID(ramp); IFCAnyHandle localPlacement = ecData.GetLocalPlacement(); IFCAnyHandle rampHnd = IFCInstanceExporter.CreateRamp(file, guid, ownerHistory, rampName, rampDescription, rampObjectType, localPlacement, null, elementTag, rampType); productWrapper.AddElement(ramp, rampHnd, placementSetter.LevelInfo, ecData, true); StairRampContainerInfo stairRampInfo = new StairRampContainerInfo(rampHnd, components, localPlacement); ExporterCacheManager.StairRampContainerInfoCache.AddStairRampContainerInfo(ramp.Id, stairRampInfo); ExportMultistoryRamp(exporterIFC, ramp, numFlights, rampHnd, components, componentExtrusionData, placementSetter, productWrapper); } tr.Commit(); } } }
/// <summary> /// Exports an element as IFC covering. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element to be exported.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void ExportCovering(ExporterIFC exporterIFC, Element element, GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper) { bool exportParts = PartExporter.CanExportParts(element); if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false)) { return; } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum; if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcCovering", out elementClassTypeEnum)) { if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } } ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType; IFCFile file = exporterIFC.GetFile(); using (IFCTransaction transaction = new IFCTransaction(file)) { using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ElementId categoryId = CategoryUtil.GetSafeCategoryId(element); IFCAnyHandle prodRep = null; if (!exportParts) { ecData.SetLocalPlacement(setter.LocalPlacement); ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ; BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element, categoryId, geomElem, bodyExporterOptions, null, ecData, true); if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep)) { ecData.ClearOpenings(); return; } } // We will use the category of the element to set a default value for the covering. string defaultCoveringEnumType = null; if (categoryId == new ElementId(BuiltInCategory.OST_Ceilings)) { defaultCoveringEnumType = "CEILING"; } else if (categoryId == new ElementId(BuiltInCategory.OST_Floors)) { defaultCoveringEnumType = "FLOORING"; } else if (categoryId == new ElementId(BuiltInCategory.OST_Roofs)) { defaultCoveringEnumType = "ROOFING"; } string instanceGUID = GUIDUtil.CreateGUID(element); string instanceName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element)); string instanceDescription = NamingUtil.GetDescriptionOverride(element, null); string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName()); string instanceTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element)); string coveringType = IFCValidateEntry.GetValidIFCType(element, ifcEnumType, defaultCoveringEnumType); IFCAnyHandle covering = IFCInstanceExporter.CreateCovering(file, instanceGUID, ExporterCacheManager.OwnerHistoryHandle, instanceName, instanceDescription, instanceObjectType, setter.LocalPlacement, prodRep, instanceTag, coveringType); if (exportParts) { PartExporter.ExportHostPart(exporterIFC, element, covering, productWrapper, setter, setter.LocalPlacement, null); } bool containInSpace = false; IFCAnyHandle localPlacementToUse = setter.LocalPlacement; // Ceiling containment in Space is generally required and not specific to any view if (ExporterCacheManager.CeilingSpaceRelCache.ContainsKey(element.Id)) { IList <ElementId> roomlist = ExporterCacheManager.CeilingSpaceRelCache[element.Id]; // Process Ceiling to be contained in a Space only when it is exactly bounding one Space if (roomlist.Count == 1) { productWrapper.AddElement(element, covering, setter, null, false); // Modify the Ceiling placement to be relative to the Space that it bounds IFCAnyHandle roomPlacement = IFCAnyHandleUtil.GetObjectPlacement(ExporterCacheManager.SpaceInfoCache.FindSpaceHandle(roomlist[0])); Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(roomPlacement, localPlacementToUse); Transform inverseTrf = relTrf.Inverse; IFCAnyHandle relLocalPlacement = ExporterUtil.CreateAxis2Placement3D(file, inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX); IFCAnyHandleUtil.SetAttribute(localPlacementToUse, "PlacementRelTo", roomPlacement); GeometryUtil.SetRelativePlacement(localPlacementToUse, relLocalPlacement); ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomlist[0], covering); containInSpace = true; } } // if not contained in Space, assign it to default containment in Level if (!containInSpace) { productWrapper.AddElement(element, covering, setter, null, true); } if (!exportParts) { Ceiling ceiling = element as Ceiling; if (ceiling != null) { HostObjectExporter.ExportHostObjectMaterials(exporterIFC, ceiling, covering, geomElem, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, null); } else { ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geomElem, exporterIFC, element); CategoryUtil.CreateMaterialAssociation(exporterIFC, covering, matId); } } OpeningUtil.CreateOpeningsIfNecessary(covering, element, ecData, null, exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper); } } transaction.Commit(); } }