/// <summary>
/// 替换电极图纸
/// </summary>
/// <param name="oldParenInfo"></param>
/// <param name="newParenInfo"></param>
/// <returns></returns>
public List <string> AlterEleDra(ParentAssmblieInfo oldParenInfo, ParentAssmblieInfo newParenInfo)
{
List <string> err = new List <string>();
UFSession theUFSession = UFSession.GetUFSession();
Part workPart = Session.GetSession().Parts.Work;
string oldDra = directoryPath + oldNameInfo.EleName + "_dwg.prt";
if (!File.Exists(oldDra))
{
return(err);
}
string newDra = directoryPath + newNameInfo.EleName + "_dwg.prt";
if (File.Exists(newDra))
{
err.Add(newNameInfo.EleName + " 替换失败，替换后有同名工件！ ");
return(err);
}
else
{
foreach (Part pt in Session.GetSession().Parts)
{
if (pt.Name.Equals(oldNameInfo.EleName + "_dwg", StringComparison.CurrentCultureIgnoreCase))
{
pt.Close(NXOpen.BasePart.CloseWholeTree.False, NXOpen.BasePart.CloseModified.UseResponses, null);
}
}
File.Move(oldDra, newDra);
Tag partTag;
UFPart.LoadStatus error_status;
theUFSession.Part.Open(newDra, out partTag, out error_status);
Part newPart = NXObjectManager.Get(partTag) as Part;
PartUtils.SetPartDisplay(newPart);
NXOpen.Assemblies.Component comp = newPart.ComponentAssembly.RootComponent.GetChildren()[0];
string workName = comp.Name.Replace(oldParenInfo.MoldInfo.MoldNumber + "-" + oldParenInfo.MoldInfo.WorkpieceNumber, newParenInfo.MoldInfo.MoldNumber + "-" + newParenInfo.MoldInfo.WorkpieceNumber);
try
{
Basic.AssmbliesUtils.ReplaceComp(comp, this.directoryPath + workName + ".prt", workName);
}
catch
{
}
if (newPart != null)
{
newNameInfo.SetAttribute(newPart);
ParentAssmblieInfo info = ParentAssmblieInfo.GetAttribute(newPart);
info.MoldInfo = newParenInfo.MoldInfo;
info.UserModel = newParenInfo.UserModel;
info.SetAttribute(newPart);
foreach (DrawingSheet st in newPart.DrawingSheets)
{
Basic.DrawingUtils.UpdateViews(st);
}
}
PartUtils.SetPartDisplay(workPart);
err.Add(newNameInfo.EleName + " 图纸替换成功！ ");
return(err);
}
}
//------------------------------------------------------------------------------
//Callback Name: filter_cb
//------------------------------------------------------------------------------
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
TaggedObject[] obj = this.selePart.GetSelectedObjects();
if (selectedObject is NXOpen.Assemblies.Component)
{
Part part = (selectedObject as NXOpen.Assemblies.Component).Prototype as Part;
ParentAssmblieInfo info = ParentAssmblieInfo.GetAttribute(part);
if (info.Type == PartType.Workpiece || info.Type == PartType.Work)
{
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
}
if (obj.Length > 0)
{
// Part part = (obj[0] as NXOpen.Assemblies.Component).Prototype as Part;
if (selectedObject is Face)
{
Face seleFace = selectedObject as Face;
Part selePart = (seleFace.Prototype as Face).OwningPart as Part;
if (selePart.Tag == this.selectPart.Tag)
{
return(UFConstants.UF_UI_SEL_ACCEPT);
}
}
else if (selectedObject is Point)
{
return(UFConstants.UF_UI_SEL_ACCEPT);
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_REJECT);
}
public int filter_cb(NXOpen.BlockStyler.UIBlock block, NXOpen.TaggedObject selectedObject)
{
if (selectedObject is NXOpen.Assemblies.Component)
{
Part part = (selectedObject as NXOpen.Assemblies.Component).Prototype as Part;
ParentAssmblieInfo info = ParentAssmblieInfo.GetAttribute(part);
if (info.Type == PartType.Electrode)
{
return(NXOpen.UF.UFConstants.UF_UI_SEL_ACCEPT);
}
}
return(NXOpen.UF.UFConstants.UF_UI_SEL_REJECT);
}
private void GetAllModel()
{
foreach (Part pt in Session.GetSession().Parts)
{
string name = pt.Name;
if (ParentAssmblieInfo.IsParent(pt))
{
ParentAssmblieInfo parent = ParentAssmblieInfo.GetAttribute(pt);
switch (parent.Type)
{
case PartType.ASM:
Asm.Add(new ASMModel(pt));
break;
case PartType.EDM:
Edm.Add(new EDMModel(pt));
break;
case PartType.Electrode:
ElectrodeModel eleModel = new ElectrodeModel(pt);
Electrode.Add(eleModel);
break;
case PartType.Work:
Work.Add(new WorkModel(pt));
break;
default:
Other.Add(pt);
break;
}
}
else
{
Other.Add(pt);
}
}
}
public List <string> AlterEle(ParentAssmblieInfo parenInfo)
{
Part newElePart;
string newEleName = elePt.Name.Replace(oldNameInfo.EleName, newNameInfo.EleName);
string newPath = directoryPath + newEleName + ".prt";
List <string> err = new List <string>();
if (File.Exists(newPath))
{
err.Add(newEleName + " 替换失败，替换后有同名工件！ ");
return(err);
}
ParentAssmblieInfo info = ParentAssmblieInfo.GetAttribute(elePt);
err.AddRange(ReplacePart.Replace(elePt, newPath, newEleName, out newElePart));
if (newElePart != null)
{
info.MoldInfo = parenInfo.MoldInfo;
info.UserModel = parenInfo.UserModel;
newNameInfo.SetAttribute(newElePart);
info.SetAttribute(newElePart);
}
return(err);
}
/// <summary>
/// 复制work
/// </summary>
/// <param name="ct"></param>
/// <param name="work"></param>
/// <param name="workpieceNumber"></param>
/// <param name="user"></param>
/// <returns></returns>
private List <string> CopyWork(NXOpen.Assemblies.Component ct, WorkModel work, string workpieceNumber, UserModel user)
{
List <string> err = new List <string>();
Matrix4 mat = new Matrix4();
mat.Identity();
MoldInfo mold = work.Info.MoldInfo.Clone() as MoldInfo;
NXOpen.Assemblies.Component moveCt = null;
try
{
moveCt = AssmbliesUtils.MoveCompCopyPart(ct, new Vector3d(), mat);
}
catch (NXException ex)
{
err.Add("无法移动工件！" + ex.Message);
return(err);
}
mold.WorkpieceNumber = workpieceNumber;
string name = work.WorkpieceDirectoryPath + mold.MoldNumber + "-" + mold.WorkpieceNumber + "-";
if (moveCt != null)
{
foreach (NXOpen.Assemblies.Component com in moveCt.GetChildren())
{
if (ParentAssmblieInfo.IsParent(com))
{
ParentAssmblieInfo info1 = ParentAssmblieInfo.GetAttribute(com);
if (info1.Type == PartType.EDM)
{
string edmName = name + "EDM";
if (File.Exists(edmName + ".prt"))
{
edmName = edmName + "5";
}
EDMInfo edm = new EDMInfo(mold, user);
try
{
NXObject make = AssmbliesUtils.MakeUnique(com, edmName + ".prt");
edm.SetAttribute(com.Prototype as Part);
break;
}
catch (NXException ex)
{
err.Add(name + "EDM.prt" + ex.Message + "无法创建唯一");
}
}
}
}
try
{
NXObject make1 = AssmbliesUtils.MakeUnique(moveCt, name + "WORK" + work.Info.WorkNumber.ToString() + ".prt");
WorkInfo wk = new WorkInfo(mold, user, work.Info.WorkNumber, work.Info.Matr);
wk.SetAttribute(moveCt.Prototype as Part);
}
catch (NXException ex)
{
err.Add(name + "WORK" + work.Info.WorkNumber.ToString() + ".prt" + ex.Message + "无法创建唯一");
}
}
return(err);
}