/// <summary>
/// Builds the noise map.
///
/// @pre SetBounds() was previously called.
/// @pre NoiseMap was previously defined.
/// @pre a SourceModule was previously defined.
/// @pre The width and height values specified by SetSize() are
/// positive.
/// @pre The width and height values specified by SetSize() do not
/// exceed the maximum possible width and height for the noise map.
///
/// @post The original contents of the destination noise map is
/// destroyed.
///
/// @throw noise::ArgumentException See the preconditions.
///
/// If this method is successful, the destination noise map contains
/// the coherent-noise values from the noise module specified by
/// the SourceModule.
/// </summary>
public override void Build()
{
if (_lowerXBound >= _upperXBound || _lowerZBound >= _upperZBound)
{
throw new ArgumentException(
"Incoherent bounds : lowerXBound >= upperXBound or lowerZBound >= upperZBound");
}
if (PWidth < 0 || PHeight < 0)
{
throw new ArgumentException("Dimension must be greater or equal 0");
}
if (PSourceModule == null)
{
throw new ArgumentException("A source module must be provided");
}
if (PNoiseMap == null)
{
throw new ArgumentException("A noise map must be provided");
}
// Resize the destination noise map so that it can store the new output
// values from the source model.
PNoiseMap.SetSize(PWidth, PHeight);
// Create the plane model.
var model = new Plane(PSourceModule);
float xExtent = _upperXBound - _lowerXBound;
float zExtent = _upperZBound - _lowerZBound;
float xDelta = xExtent / PWidth;
float zDelta = zExtent / PHeight;
float xCur = _lowerXBound;
float zCur = _lowerZBound;
// Fill every point in the noise map with the output values from the model.
for (int z = 0; z < PHeight; z++)
{
xCur = _lowerXBound;
for (int x = 0; x < PWidth; x++)
{
float finalValue;
var level = FilterLevel.Source;
if (PFilter != null)
{
level = PFilter.IsFiltered(x, z);
}
if (level == FilterLevel.Constant)
{
finalValue = PFilter.ConstantValue;
}
else
{
if (_seamless)
{
float swValue = model.GetValue(xCur, zCur);
float seValue = model.GetValue(xCur + xExtent, zCur);
float nwValue = model.GetValue(xCur, zCur + zExtent);
float neValue = model.GetValue(xCur + xExtent, zCur + zExtent);
float xBlend = 1.0f - ((xCur - _lowerXBound) / xExtent);
float zBlend = 1.0f - ((zCur - _lowerZBound) / zExtent);
float z0 = Libnoise.Lerp(swValue, seValue, xBlend);
float z1 = Libnoise.Lerp(nwValue, neValue, xBlend);
finalValue = Libnoise.Lerp(z0, z1, zBlend);
}
else
{
finalValue = model.GetValue(xCur, zCur);
}
if (level == FilterLevel.Filter && PFilter != null)
{
finalValue = PFilter.FilterValue(x, z, finalValue);
}
}
PNoiseMap.SetValue(x, z, finalValue);
xCur += xDelta;
}
zCur += zDelta;
if (PCallBack != null)
{
PCallBack(z);
}
}
}
/// <summary>
/// Builds the noise map.
///
/// @pre SetBounds() was previously called.
/// @pre NoiseMap was previously defined.
/// @pre a SourceModule was previously defined.
/// @pre The width and height values specified by SetSize() are
/// positive.
/// @pre The width and height values specified by SetSize() do not
/// exceed the maximum possible width and height for the noise map.
///
/// @post The original contents of the destination noise map is
/// destroyed.
///
/// @throw noise::ArgumentException See the preconditions.
///
/// If this method is successful, the destination noise map contains
/// the coherent-noise values from the noise module specified by
/// the SourceModule.
/// </summary>
public override void Build()
{
if (_lowerAngleBound >= _upperAngleBound || _lowerHeightBound >= _upperHeightBound)
{
throw new ArgumentException(
"Incoherent bounds : lowerAngleBound >= upperAngleBound or lowerZBound >= upperHeightBound");
}
if (PWidth < 0 || PHeight < 0)
{
throw new ArgumentException("Dimension must be greater or equal 0");
}
if (PSourceModule == null)
{
throw new ArgumentException("A source module must be provided");
}
if (PNoiseMap == null)
{
throw new ArgumentException("A noise map must be provided");
}
// Resize the destination noise map so that it can store the new output
// values from the source model.
PNoiseMap.SetSize(PWidth, PHeight);
// Create the plane model.
var model = new Cylinder((IModule3D)PSourceModule);
double angleExtent = _upperAngleBound - _lowerAngleBound;
double heightExtent = _upperHeightBound - _lowerHeightBound;
double xDelta = angleExtent / PWidth;
double yDelta = heightExtent / PHeight;
double curAngle = _lowerAngleBound;
double curHeight = _lowerHeightBound;
// Fill every point in the noise map with the output values from the model.
for (int y = 0; y < PHeight; y++)
{
curAngle = _lowerAngleBound;
for (int x = 0; x < PWidth; x++)
{
double finalValue;
var level = FilterLevel.Source;
if (PFilter != null)
{
level = PFilter.IsFiltered(x, y);
}
if (level == FilterLevel.Constant && PFilter != null)
{
finalValue = PFilter.ConstantValue;
}
else
{
finalValue = model.GetValue(curAngle, curHeight);
if (level == FilterLevel.Filter && PFilter != null)
{
finalValue = PFilter.FilterValue(x, y, finalValue);
}
}
PNoiseMap.SetValue(x, y, finalValue);
curAngle += xDelta;
}
curHeight += yDelta;
if (PCallBack != null)
{
PCallBack(y);
}
}
}
/// <summary>
/// Builds the noise map.
///
/// @pre SetBounds() was previously called.
/// @pre NoiseMap was previously defined.
/// @pre a SourceModule was previously defined.
/// @pre The width and height values specified by SetSize() are
/// positive.
/// @pre The width and height values specified by SetSize() do not
/// exceed the maximum possible width and height for the noise map.
///
/// @post The original contents of the destination noise map is
/// destroyed.
///
/// @throw noise::ArgumentException See the preconditions.
///
/// If this method is successful, the destination noise map contains
/// the coherent-noise values from the noise module specified by
/// the SourceModule.
/// </summary>
public override void Build()
{
if (_southLatBound >= _northLatBound || _westLonBound >= _eastLonBound)
{
throw new ArgumentException(
"Incoherent bounds : southLatBound >= northLatBound or westLonBound >= eastLonBound");
}
if (PWidth < 0 || PHeight < 0)
{
throw new ArgumentException("Dimension must be greater or equal 0");
}
if (PSourceModule == null)
{
throw new ArgumentException("A source module must be provided");
}
if (PNoiseMap == null)
{
throw new ArgumentException("A noise map must be provided");
}
// Resize the destination noise map so that it can store the new output
// values from the source model.
PNoiseMap.SetSize(PWidth, PHeight);
// Create the plane model.
var model = new Sphere((IModule3D)PSourceModule);
float lonExtent = _eastLonBound - _westLonBound;
float latExtent = _northLatBound - _southLatBound;
float xDelta = lonExtent / PWidth;
float yDelta = latExtent / PHeight;
float curLon = _westLonBound;
float curLat = _southLatBound;
// Fill every point in the noise map with the output values from the model.
for (int y = 0; y < PHeight; y++)
{
curLon = _westLonBound;
for (int x = 0; x < PWidth; x++)
{
float finalValue;
var level = FilterLevel.Source;
if (PFilter != null)
{
level = PFilter.IsFiltered(x, y);
}
if (level == FilterLevel.Constant)
{
finalValue = PFilter.ConstantValue;
}
else
{
finalValue = model.GetValue(curLat, curLon);
if (level == FilterLevel.Filter)
{
finalValue = PFilter.FilterValue(x, y, finalValue);
}
}
PNoiseMap.SetValue(x, y, finalValue);
curLon += xDelta;
}
curLat += yDelta;
if (PCallBack != null)
{
PCallBack(y);
}
}
}