public static void ApplyViewFilter(Document doc, View view, ParameterFilterElement filter, ElementId solidFillPatternId, int colorNumber, bool colorLines, bool colorFill)
{
view.AddFilter(filter.Id);
OverrideGraphicSettings ogs = new OverrideGraphicSettings();
byte red = Convert.ToByte(ColorsCollection.colors[colorNumber].Substring(1, 2), 16);
byte green = Convert.ToByte(ColorsCollection.colors[colorNumber].Substring(3, 2), 16);
byte blue = Convert.ToByte(ColorsCollection.colors[colorNumber].Substring(5, 2), 16);
Color clr = new Color(red, green, blue);
if (colorLines)
{
ogs.SetProjectionLineColor(clr);
ogs.SetCutLineColor(clr);
}
if (colorFill)
{
#if R2017 || R2018
ogs.SetProjectionFillColor(clr);
ogs.SetProjectionFillPatternId(solidFillPatternId);
ogs.SetCutFillColor(clr);
ogs.SetCutFillPatternId(solidFillPatternId);
#else
ogs.SetSurfaceForegroundPatternColor(clr);
ogs.SetSurfaceForegroundPatternId(solidFillPatternId);
ogs.SetCutForegroundPatternColor(clr);
ogs.SetCutForegroundPatternId(solidFillPatternId);
#endif
}
view.SetFilterOverrides(filter.Id, ogs);
}
private void UnHiLighted(ElementId elementId, UIDocument uiDoc, Document doc)
{
OverrideGraphicSettings ogs = new OverrideGraphicSettings();
// Color red = new Color(255, 0, 0);
Element solidFill = new FilteredElementCollector(doc).OfClass(typeof(FillPatternElement)).Where(q => q.Name.Contains("單色填滿")).First();
// ogs.SetProjectionLineColor(red);
// ogs.SetProjectionLineWeight(8);
ogs.SetProjectionFillPatternId(ElementId.InvalidElementId);
ogs.SetProjectionFillColor(Color.InvalidColorValue);
ogs.SetCutFillPatternId(ElementId.InvalidElementId);
ogs.SetCutFillColor(Color.InvalidColorValue);
using (Transaction t = new Transaction(doc, "Highlight element"))
{
t.Start();
try
{
// elementId = Id of element you wish to highlight
uiDoc.ActiveView.SetElementOverrides(elementId, ogs);
}
catch (Exception ex)
{
TaskDialog.Show("Exception", ex.ToString());
}
uiDoc.RefreshActiveView();
t.Commit();
}
}
public static void AddFilterToView(
Document doc, Autodesk.Revit.DB.View view, SelectionFilterElement filterElement,
Color cutFillColor, string[] cutFillPatterns, Color projFillColor, string[] projFillPatterns)
{
using (Transaction t = new Transaction(doc, "Add filter to view and set overrides"))
{
t.Start();
ElementId filterId = filterElement.Id;
view.AddFilter(filterId);
doc.Regenerate();
OverrideGraphicSettings overrideSettings = view.GetFilterOverrides(filterId);
Element cutFill = (from element in new FilteredElementCollector(doc)
.OfClass(typeof(FillPatternElement)).Cast <Element>()
where cutFillPatterns.Any(pattern => pattern.Equals(element.Name))
select element)
.FirstOrDefault();
Element projectFill = (from element in new FilteredElementCollector(doc)
.OfClass(typeof(FillPatternElement)).Cast <Element>()
where projFillPatterns.Any(pattern => pattern.Equals(element.Name))
select element)
.FirstOrDefault();
overrideSettings.SetCutFillColor(cutFillColor);
overrideSettings.SetCutFillPatternId(cutFill.Id);
overrideSettings.SetProjectionFillColor(projFillColor);
overrideSettings.SetProjectionFillPatternId(projectFill.Id);
view.SetFilterOverrides(filterId, overrideSettings);
t.Commit();
}
}
void SetOneFloorColor(Document doc, FillPatternElement fillPatternElement, ElementId floorId, Autodesk.Revit.DB.Color color)
{
OverrideGraphicSettings OverrideGraphicSettings = new OverrideGraphicSettings();
OverrideGraphicSettings = doc.ActiveView.GetElementOverrides(floorId);
OverrideGraphicSettings.SetProjectionFillPatternId(fillPatternElement.Id);
OverrideGraphicSettings.SetProjectionFillColor(color);
doc.ActiveView.SetElementOverrides(floorId, OverrideGraphicSettings);
}
/// <summary>
/// 为面层实体设置颜色、类型等参数
/// </summary>
/// <param name="tran"></param>
/// <param name="ds"></param>
/// <param name="volumn"></param>
/// <param name="area"></param>
/// <param name="faceOptions"></param>
private void SetParameters(Transaction tran, DirectShape ds, double volumn, double area, FaceOptions faceOptions)
{
// 设置实体对象在指定视力中的填充颜色
OverrideGraphicSettings gs = _view.GetElementOverrides(ds.Id);
// 填充颜色
gs.SetProjectionFillColor(faceOptions.Color);
// 填充模式
string fillPatternName = "实体填充";
FillPatternElement fpe = FillPatternElement.GetFillPatternElementByName(_doc, FillPatternTarget.Drafting, fillPatternName);
if (fpe == null)
{
fpe = FillPatternElement.Create(_doc,
new FillPattern(fillPatternName, FillPatternTarget.Drafting, FillPatternHostOrientation.ToHost));
}
gs.SetProjectionFillPatternId(fpe.Id);
gs.SetProjectionFillPatternVisible(true);
_view.SetElementOverrides(ds.Id, gs);
// 设置参数
Parameter p;
// 面层对象标识
p = ds.get_Parameter(FaceWallParameters.sp_FaceIdTag_guid);
if (p != null)
{
p.Set(FaceWallParameters.FaceIdentificaion);
}
// 面积
p = ds.get_Parameter(FaceWallParameters.sp_Area_guid);
if (p != null)
{
p.Set(area);
}
// 体积
p = ds.get_Parameter(FaceWallParameters.sp_Volumn_guid);
if (p != null)
{
p.Set(volumn);
}
// 类型
p = ds.get_Parameter(FaceWallParameters.sp_FaceType_guid);
if (p != null)
{
p.Set(faceOptions.FaceType);
}
}
/// <summary>
/// Save an element on a temporary list and override its color
/// </summary>
public static void AddToSelection(Element ReferenceElem, List <string> ListElemntsStrings, List <Element> completeList, bool checkBox)
{
Category category = ReferenceElem.Category;
BuiltInCategory enumCategory = (BuiltInCategory)category.Id.IntegerValue;
BuiltInCategory builtCategory = (BuiltInCategory)Enum.Parse(typeof(BuiltInCategory), ReferenceElem.Category.Id.ToString());
if (checkBox == true)
{
foreach (Element elem in completeList)
{
Category cat = elem.Category;
BuiltInCategory enumCat = (BuiltInCategory)cat.Id.IntegerValue;
if (enumCat.ToString() == "OST_FabricationDuctwork" &&
getNumber(elem) == "" && elem.get_Parameter(BuiltInParameter.FABRICATION_PART_DEPTH_IN) != null)
{
if (filterParam(ReferenceElem, elem, BuiltInParameter.ELEM_FAMILY_PARAM,
BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_DEPTH_IN,
BuiltInParameter.FABRICATION_PART_WIDTH_IN, BuiltInParameter.FABRICATION_SERVICE_PARAM,
BuiltInParameter.FABRICATION_PART_LENGTH))
{
selectedElements.Add(elem);
}
}
}
if (!selectedElements.Contains(ReferenceElem) && tools.getNumber(ReferenceElem) == "")
{
selectedElements.Add(ReferenceElem);
}
}
else
{
if (getNumber(ReferenceElem) == "")
{
selectedElements.Add(ReferenceElem);
}
}
OverrideGraphicSettings overrideGraphicSettings = new OverrideGraphicSettings();
System.Drawing.Color colorSelect = MainForm.ColorSelected;
byte r = colorSelect.R;
byte b = colorSelect.B;
byte g = colorSelect.G;
overrideGraphicSettings.SetProjectionFillColor(new Autodesk.Revit.DB.Color(r, g, b));
overrideGraphicSettings.SetProjectionLineColor(new Autodesk.Revit.DB.Color(r, g, b));
foreach (Element x in tools.selectedElements)
{
tools.doc.ActiveView.SetElementOverrides(x.Id, overrideGraphicSettings);
}
}
public static void Graphics20172020(Document doc, ref OverrideGraphicSettings overrideGraphicSettings, byte r, byte g, byte b)
{
#if REVIT2019
var patternCollector = new FilteredElementCollector(doc);
patternCollector.OfClass(typeof(FillPatternElement));
FillPatternElement fpe = patternCollector.ToElements()
.Cast <FillPatternElement>().First(x => x.GetFillPattern().Name.Contains("Solid fill"));
overrideGraphicSettings.SetProjectionFillPatternId(fpe.Id);
overrideGraphicSettings.SetProjectionFillPatternVisible(true);
overrideGraphicSettings.SetProjectionFillColor(new Autodesk.Revit.DB.Color(r, g, b));
overrideGraphicSettings.SetProjectionLineColor(new Autodesk.Revit.DB.Color(r, g, b));
#endif
}
public static void SetColor(this Element elem, View view, byte r, byte g, byte b)
{
try
{
Color val = new Color(r, g, b);
OverrideGraphicSettings val2 = new OverrideGraphicSettings();
val2.SetProjectionLineColor(val);
val2.SetProjectionFillColor(val);
view.SetElementOverrides(elem.Id, val2);
}
catch
{
}
}
public static OverrideGraphicSettings GetOverrideGraphicSettings(Color color, ElementId fillPatternId, int transparency)
{
OverrideGraphicSettings settings = new OverrideGraphicSettings();
settings.SetCutFillColor(color);
settings.SetCutFillPatternId(fillPatternId);
settings.SetCutLineColor(color);
settings.SetCutLinePatternId(fillPatternId);
settings.SetProjectionFillColor(color);
settings.SetProjectionFillPatternId(fillPatternId);
settings.SetProjectionLineColor(color);
settings.SetProjectionLinePatternId(fillPatternId);
settings.SetSurfaceTransparency(transparency);
return(settings);
}
public static OverrideGraphicSettings getStandartGraphicSettings(Document doc)
{
OverrideGraphicSettings overrideGraphic = new OverrideGraphicSettings();
#if Revit2018
overrideGraphic.SetProjectionFillPatternId(ElementId.InvalidElementId);
overrideGraphic.SetProjectionFillColor(Color.InvalidColorValue);
#endif
#if Revit2020
overrideGraphic.SetSurfaceForegroundPatternId(ElementId.InvalidElementId);
overrideGraphic.SetSurfaceForegroundPatternColor(Color.InvalidColorValue);
#endif
overrideGraphic.SetProjectionLineColor(Color.InvalidColorValue);
return(overrideGraphic);
}
/// <summary>
/// Override colors in view by prefix
/// </summary>
public static void ColorInView()
{
using (Transaction ResetView = new Transaction(tools.uidoc.Document, "Reset view"))
{
ResetView.Start();
OverrideGraphicSettings overrideGraphicSettings = new OverrideGraphicSettings();
LogicalOrFilter logicalOrFilter = new LogicalOrFilter(filters());
var collector = new FilteredElementCollector(doc, doc.ActiveView.Id).WherePasses(
logicalOrFilter).WhereElementIsNotElementType();
Dictionary <Element, string> elemtNPrefix = new Dictionary <Element, string>();
Dictionary <string, Color> colorNPrefix = new Dictionary <string, Color>();
//Create a Dictionary with Elements and its prefixes
foreach (var item in collector.ToElements())
{
var number = getNumber(item);
var itemNumber = GetNumberAndPrexif(number);
if (itemNumber != null)
{
elemtNPrefix.Add(item, itemNumber.Item1);
}
}
//Create a unique prefixes and an assigned color
foreach (var prefix in elemtNPrefix.Values.Distinct())
{
//Chanchada
System.Threading.Thread.Sleep(50);
Random randonGen = new Random();
Color randomColor = Color.FromArgb(1, randonGen.Next(255), randonGen.Next(255), randonGen.Next(255));
colorNPrefix.Add(prefix, randomColor);
}
//Override colors following the already created schema of colors
foreach (var item in elemtNPrefix)
{
overrideGraphicSettings.SetProjectionFillColor(new Autodesk.Revit.DB.Color(colorNPrefix[item.Value].R, colorNPrefix[item.Value].G, colorNPrefix[item.Value].B));
overrideGraphicSettings.SetProjectionLineColor(new Autodesk.Revit.DB.Color(colorNPrefix[item.Value].R, colorNPrefix[item.Value].G, colorNPrefix[item.Value].B));
doc.ActiveView.SetElementOverrides(item.Key.Id, overrideGraphicSettings);
}
ResetView.Commit();
}
}
/// <summary>
/// Override the element's color in the active view.
/// </summary>
/// <param name="color">The color to apply to a solid fill on the element.</param>
public void OverrideColorInView(Color color)
{
TransactionManager.Instance.EnsureInTransaction(DocumentManager.Instance.CurrentDBDocument);
var view = DocumentManager.Instance.CurrentUIDocument.ActiveView;
var ogs = new OverrideGraphicSettings();
var patternCollector = new FilteredElementCollector(DocumentManager.Instance.CurrentDBDocument);
patternCollector.OfClass(typeof(FillPatternElement));
FillPatternElement solidFill = patternCollector.ToElements().Cast <FillPatternElement>().First(x => x.GetFillPattern().Name == "Solid fill");
ogs.SetProjectionFillColor(new Autodesk.Revit.DB.Color(color.Red, color.Green, color.Blue));
ogs.SetProjectionFillPatternId(solidFill.Id);
view.SetElementOverrides(this.InternalElementId, ogs);
TransactionManager.Instance.TransactionTaskDone();
}
OverrideGraphicSettings GetOverrideGraphicSettings(Document doc)
{
var setting = new OverrideGraphicSettings();
setting.SetHalftone(IsHalftone);
setting.SetProjectionFillPatternVisible(IsSurfaceVisible);
setting.SetProjectionFillColor(new Color(Color.R, Color.G, Color.B));
if (FillerId == -1)
{
setting.SetProjectionFillPatternId(GetDefaultFillPatternId(doc));
}
else
{
setting.SetProjectionFillPatternId(new ElementId(FillerId));
}
setting.SetSurfaceTransparency(SurfaceTransparency);
return(setting);
}
public OverrideCat(Document doc, ElementId pattern, List <string> category_ovr)
{
BuiltInCategory category = Helper.GetCategories(category_ovr[0]);
var r = Convert.ToByte(category_ovr[1]);
var g = Convert.ToByte(category_ovr[2]);
var b = Convert.ToByte(category_ovr[3]);
var color_c = new Color(r, g, b);
foreach (Category elem in doc.Settings.Categories)
{
try
{
if (elem != null)
{
var elemBcCat = (BuiltInCategory)elem.Id.IntegerValue;
string bcCat = elemBcCat.ToString();
if (category_ovr[0] == bcCat)
{
this.categ = elem;
}
}
}
catch (Exception) { }
}
var gSettings = new OverrideGraphicSettings();
gSettings.SetSurfaceTransparency(0);
gSettings.SetCutFillColor(color_c);
gSettings.SetCutLineColor(color_c);
gSettings.SetCutFillPatternVisible(true);
gSettings.SetCutFillPatternId(pattern);
gSettings.SetProjectionFillColor(color_c);
gSettings.SetProjectionLineColor(color_c);
gSettings.SetProjectionFillPatternId(pattern);
this.builtincategory = category;
this.overrides = gSettings;
this.visible = true;
}
void ChangeColor(Document doc, ElementId id)
{
byte _R = (byte)new Random().Next(0, 255);
byte _G = (byte)new Random().Next(0, 255);
byte _B = (byte)new Random().Next(0, 255);
Color color = new Color(255, _G, _B);
//Color color = new Color(255,0,0);
FillPatternElement fp = new FilteredElementCollector(doc).OfClass(typeof(FillPatternElement)).First(m => (m as FillPatternElement).GetFillPattern().IsSolidFill) as FillPatternElement;
OverrideGraphicSettings ogs = new OverrideGraphicSettings();
ogs.SetProjectionFillPatternId(fp.Id);
ogs.SetProjectionFillColor(color);
using (Transaction ts = new Transaction(doc, "change element color"))
{
ts.Start();
doc.ActiveView.SetElementOverrides(id, ogs);
ts.Commit();
}
}
public override Value Evaluate(FSharpList <Value> args)
{
var color = (System.Drawing.Color)((Value.Container)args[0]).Item;
var elem = (Element)((Value.Container)args[1]).Item;
var view = dynRevitSettings.Doc.ActiveView;
var ogs = new OverrideGraphicSettings();
if (solidFill == null)
{
var patternCollector = new FilteredElementCollector(dynRevitSettings.Doc.Document);
patternCollector.OfClass(typeof(FillPatternElement));
solidFill = patternCollector.ToElements().Cast <FillPatternElement>().First(x => x.GetFillPattern().Name == "Solid fill");
}
ogs.SetProjectionFillColor(new Autodesk.Revit.DB.Color(color.R, color.G, color.B));
ogs.SetProjectionFillPatternId(solidFill.Id);
view.SetElementOverrides(elem.Id, ogs);
return(Value.NewNumber(1));
}
private OverrideGraphicSettings getGraphicSettings(Color color)
{
FillPatternElement fillPattern = null;
List <Element> fillPatterns = new FilteredElementCollector(doc)
.OfClass(typeof(FillPatternElement))
.WhereElementIsNotElementType()
.ToElements()
.ToList();
foreach (var fp in fillPatterns)
{
if (fp.Name.ToString().Contains("Сплошная заливка"))
{
fillPattern = (FillPatternElement)fp;
break;
}
}
if (fillPattern == null)
{
Print("Заливка \"Сплошная заливка\" не найдена", KPLN_Loader.Preferences.MessageType.Error);
return(null);
}
OverrideGraphicSettings overrideGraphic = new OverrideGraphicSettings();
#if Revit2018
overrideGraphic.SetProjectionFillPatternId(fillPattern.Id);
overrideGraphic.SetProjectionFillColor(color);
#endif
#if Revit2020
overrideGraphic.SetSurfaceForegroundPatternId(fillPattern.Id);
overrideGraphic.SetSurfaceForegroundPatternColor(color);
#endif
overrideGraphic.SetProjectionLineColor(color);
return(overrideGraphic);
}
/// <summary>
/// Save an element on a temporary list and override its color
/// </summary>
public static void AddToSelection()
{
selectedElements.Clear();
var filterS = new SelectionFilter();
var refElement = uidoc.Selection.PickObject(Autodesk.Revit.UI.Selection.ObjectType.Element, new SelectionFilter());
if (refElement != null)
{
var element = uidoc.Document.GetElement(refElement);
Category category = element.Category;
BuiltInCategory enumCategory = (BuiltInCategory)category.Id.IntegerValue;
//Check for other rectangular ducts with the same parameters
if (enumCategory.ToString() == "OST_DuctCurves" &&
element.get_Parameter(BuiltInParameter.RBS_CURVE_DIAMETER_PARAM)?.AsValueString() == null)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_DuctCurves, BuiltInParameter.RBS_DUCT_SYSTEM_TYPE_PARAM, BuiltInParameter.SYMBOL_FAMILY_NAME_PARAM, BuiltInParameter.CURVE_ELEM_LENGTH,
BuiltInParameter.RBS_CURVE_WIDTH_PARAM, BuiltInParameter.RBS_CURVE_HEIGHT_PARAM);
}
//Check for other ducts fittings with the same parameters
if (enumCategory.ToString() == "OST_DuctFitting" &&
element.get_Parameter(BuiltInParameter.RBS_CURVE_DIAMETER_PARAM)?.AsValueString() == null)
{
string elemParam01 = element.get_Parameter(BuiltInParameter.RBS_SYSTEM_CLASSIFICATION_PARAM).AsValueString();
string elemParam02 = element.get_Parameter(BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM).AsValueString();
string elemParam03 = element.get_Parameter(BuiltInParameter.RBS_REFERENCE_FREESIZE).AsString();
string elemParam04 = element.get_Parameter(BuiltInParameter.RBS_REFERENCE_OVERALLSIZE).AsString();
string elemParam05 = element.get_Parameter(BuiltInParameter.RBS_CALCULATED_SIZE).AsString();
FilteredElementCollector viewCollector = new FilteredElementCollector(doc, uidoc.ActiveView.Id);
List <Element> ducts = new FilteredElementCollector(doc, uidoc.ActiveView.Id)
.OfCategory(Autodesk.Revit.DB.BuiltInCategory.OST_DuctFitting)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_SYSTEM_CLASSIFICATION_PARAM).AsValueString() == elemParam01)
.Where(a => a.get_Parameter(BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM).AsValueString() == elemParam02)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_REFERENCE_FREESIZE).AsString() == elemParam03)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_REFERENCE_OVERALLSIZE).AsString() == elemParam04)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_CALCULATED_SIZE).AsString() == elemParam05)
.ToList();
foreach (Element x in ducts)
{
selectedElements.Add(x);
ListOfElements.Add(x);
}
}
bool boolTest = false;
var familyTypee = element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM).AsValueString();
if (familyTypee.Contains("Bend"))
{
boolTest = true;
}
bool TapTest = false;
var familyTapType = element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM).AsValueString();
if (familyTapType.Contains("Tap"))
{
TapTest = true;
}
//Check for other round ducts with the same parameters
if (enumCategory.ToString() == "OST_DuctCurves" &&
element.get_Parameter(BuiltInParameter.RBS_CURVE_DIAMETER_PARAM)?.AsValueString() != null &&
TapTest != true)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_DuctCurves, BuiltInParameter.RBS_DUCT_SYSTEM_TYPE_PARAM, BuiltInParameter.SYMBOL_FAMILY_NAME_PARAM, BuiltInParameter.CURVE_ELEM_LENGTH,
BuiltInParameter.RBS_CURVE_SURFACE_AREA, BuiltInParameter.RBS_CURVE_DIAMETER_PARAM);
}
//Check for other rectangular fab ducts with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM)?.AsValueString() != "Generic Square Bend" &&
TapTest != true)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.FABRICATION_PART_LENGTH, BuiltInParameter.FABRICATION_PART_DEPTH_IN,
BuiltInParameter.FABRICATION_PART_WIDTH_IN, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
//Check for other rectangular fab ducts fittings of angle 90 with the same parameters
//if (enumCategory.ToString() == "OST_FabricationDuctwork"
// && element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null
// && element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() == null
// && element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM)?.AsValueString() == "Generic Square Bend"
// )
//{
// filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_DEPTH_IN,
// BuiltInParameter.FABRICATION_PART_WIDTH_IN, BuiltInParameter.FABRICATION_SERVICE_PARAM);
//}
//Check for other rectangular fab ducts fittings of angle 90 with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
boolTest == true &&
TapTest != true
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_DEPTH_IN,
BuiltInParameter.FABRICATION_PART_WIDTH_IN, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
//Check for other rectangular fab ducts fittings with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() != null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() == null
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_ANGLE, BuiltInParameter.FABRICATION_SERVICE_PARAM,
BuiltInParameter.FABRICATION_PART_DEPTH_IN, BuiltInParameter.FABRICATION_PART_WIDTH_IN);
}
//Check for other rectangular fab ducts fittings with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() != null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() != null
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_ANGLE, BuiltInParameter.FABRICATION_SERVICE_PARAM,
BuiltInParameter.FABRICATION_PART_DIAMETER_IN, BuiltInParameter.RBS_REFERENCE_OVERALLSIZE);
}
//Check for other round fab ducts with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() != null &&
TapTest != true
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.FABRICATION_PART_LENGTH, BuiltInParameter.FABRICATION_PART_DIAMETER_IN,
BuiltInParameter.FABRICATION_PART_SHEETMETAL_AREA, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
//Check for other round fab ducts with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() != null &&
TapTest == true
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.FABRICATION_PART_LENGTH, BuiltInParameter.FABRICATION_PART_DIAMETER_IN,
BuiltInParameter.RBS_REFERENCE_OVERALLSIZE, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
selectedElements.Add(element);
//TODO: check if element is from the right category
OverrideGraphicSettings overrideGraphicSettings = new OverrideGraphicSettings();
Color colorSelect = MainForm.ColorSelected;
//Split coloSelect in R,G,B to be transformed to a Revit color later
byte r = colorSelect.R;
byte b = colorSelect.B;
byte g = colorSelect.G;
//Set override properties to fill and line colors
overrideGraphicSettings.SetProjectionFillColor(new Autodesk.Revit.DB.Color(r, g, b));
overrideGraphicSettings.SetProjectionLineColor(new Autodesk.Revit.DB.Color(r, g, b));
foreach (Element x in selectedElements)
{
//Override color of element
doc.ActiveView.SetElementOverrides(x.Id, overrideGraphicSettings);
}
selectedElement = element;
//Add element to the temporary list of selected elemenents
ListOfElements.Add(element);
}
}
public static Element Create(this Grevit.Types.Filter filter)
{
List<ElementId> categories = new List<ElementId>();
Dictionary<string,ElementId> parameters = new Dictionary<string,ElementId>();
foreach (Category category in GrevitBuildModel.document.Settings.Categories)
{
if (filter.categories.Contains(category.Name) || filter.categories.Count == 0) categories.Add(category.Id);
FilteredElementCollector collector = new FilteredElementCollector(GrevitBuildModel.document).OfCategoryId(category.Id);
if (collector.Count() > 0)
{
foreach (Autodesk.Revit.DB.Parameter parameter in collector.FirstElement().Parameters)
if (!parameters.ContainsKey(parameter.Definition.Name)) parameters.Add(parameter.Definition.Name, parameter.Id);
}
}
ParameterFilterElement parameterFilter = null;
FilteredElementCollector collect = new FilteredElementCollector(GrevitBuildModel.document).OfClass(typeof(ParameterFilterElement));
foreach (ParameterFilterElement existingFilter in collect.ToElements())
{
if (existingFilter.Name == filter.name)
{
existingFilter.ClearRules();
parameterFilter = existingFilter;
}
}
if (parameterFilter == null) parameterFilter = ParameterFilterElement.Create(GrevitBuildModel.document, filter.name, categories);
View view = (View)Utilities.GetElementByName(GrevitBuildModel.document, typeof(View), filter.view);
view.AddFilter(parameterFilter.Id);
#region Apply Rules
List<FilterRule> filterRules = new List<FilterRule>();
foreach (Grevit.Types.Rule rule in filter.Rules)
{
if (parameters.ContainsKey(rule.name))
{
FilterRule filterRule = rule.ToRevitRule(parameters[rule.name]);
if (filterRule != null) filterRules.Add(filterRule);
}
}
parameterFilter.SetRules(filterRules);
#endregion
#region Apply Overrides
OverrideGraphicSettings filterSettings = new OverrideGraphicSettings();
// Apply Colors
if (filter.CutFillColor != null) filterSettings.SetCutFillColor(filter.CutFillColor.ToRevitColor());
if (filter.ProjectionFillColor != null) filterSettings.SetProjectionFillColor(filter.ProjectionFillColor.ToRevitColor());
if (filter.CutLineColor != null) filterSettings.SetCutLineColor(filter.CutLineColor.ToRevitColor());
if (filter.ProjectionLineColor != null) filterSettings.SetProjectionLineColor(filter.ProjectionLineColor.ToRevitColor());
// Apply Lineweight
if (filter.CutLineWeight != -1) filterSettings.SetCutLineWeight(filter.CutLineWeight);
if (filter.ProjectionLineWeight != -1) filterSettings.SetProjectionLineWeight(filter.ProjectionLineWeight);
// Apply Patterns
if (filter.CutFillPattern != null)
{
FillPatternElement pattern = (FillPatternElement)Utilities.GetElementByName(GrevitBuildModel.document, typeof(FillPatternElement), filter.CutFillPattern);
filterSettings.SetCutFillPatternId(pattern.Id);
}
if (filter.ProjectionFillPattern != null)
{
FillPatternElement pattern = (FillPatternElement)Utilities.GetElementByName(GrevitBuildModel.document, typeof(FillPatternElement), filter.ProjectionFillPattern);
filterSettings.SetProjectionFillPatternId(pattern.Id);
}
if (filter.CutLinePattern != null)
{
LinePatternElement pattern = (LinePatternElement)Utilities.GetElementByName(GrevitBuildModel.document, typeof(LinePatternElement), filter.CutLinePattern);
filterSettings.SetCutLinePatternId(pattern.Id);
}
if (filter.ProjectionLinePattern != null)
{
LinePatternElement pattern = (LinePatternElement)Utilities.GetElementByName(GrevitBuildModel.document, typeof(LinePatternElement), filter.ProjectionLinePattern);
filterSettings.SetProjectionLinePatternId(pattern.Id);
}
view.SetFilterOverrides(parameterFilter.Id, filterSettings);
#endregion
return parameterFilter;
}
public override Value Evaluate(FSharpList<Value> args)
{
var color = (System.Drawing.Color)((Value.Container) args[0]).Item;
var elem = (Element) ((Value.Container) args[1]).Item;
var view = dynRevitSettings.Doc.ActiveView;
var ogs = new OverrideGraphicSettings();
if (solidFill == null)
{
var patternCollector = new FilteredElementCollector(dynRevitSettings.Doc.Document);
patternCollector.OfClass(typeof(FillPatternElement));
solidFill = patternCollector.ToElements().Cast<FillPatternElement>().First(x => x.GetFillPattern().Name == "Solid fill");
}
ogs.SetProjectionFillColor(new Autodesk.Revit.DB.Color(color.R, color.G, color.B));
ogs.SetProjectionFillPatternId(solidFill.Id);
view.SetElementOverrides(elem.Id, ogs);
return Value.NewNumber(1);
}
/// <summary>
/// Override the element's color in the active view.
/// </summary>
/// <param name="color">The color to apply to a solid fill on the element.</param>
public Element OverrideColorInView(Color color)
{
TransactionManager.Instance.EnsureInTransaction(DocumentManager.Instance.CurrentDBDocument);
var view = DocumentManager.Instance.CurrentUIDocument.ActiveView;
var ogs = new OverrideGraphicSettings();
var patternCollector = new FilteredElementCollector(DocumentManager.Instance.CurrentDBDocument);
patternCollector.OfClass(typeof(FillPatternElement));
FillPatternElement solidFill = patternCollector.ToElements().Cast<FillPatternElement>().First(x => x.GetFillPattern().Name == "Solid fill");
ogs.SetProjectionFillColor(new Autodesk.Revit.DB.Color(color.Red, color.Green, color.Blue));
ogs.SetProjectionFillPatternId(solidFill.Id);
view.SetElementOverrides(this.InternalElementId, ogs);
TransactionManager.Instance.TransactionTaskDone();
return this;
}
/// <summary>
/// 查看按完工和未完工标注颜色的视图
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btn_Preview_Click(object sender, System.EventArgs e)
{
//if (Blocking.Blocks.Count == 0 || Blocking.Blocks.Where(c => c.ElementIds.Count() > 0).Count() == 0)
// return;
var doc = m_Doc;
string viewName = "查看完成和未完成的构件";
var view = Revit_Document_Helper.GetElementByNameAs <View3D>(doc, viewName);
if (view == null)
{
using (var transaction = new Transaction(doc, "EarthworkBlocking." + nameof(btn_Preview_Click)))
{
transaction.Start();
try
{
var viewFamilyType = new FilteredElementCollector(doc).OfClass(typeof(ViewFamilyType)).ToElements()
.First(c => c.Name == "三维视图");
view = View3D.CreateIsometric(doc, viewFamilyType.Id);
view.Name = viewName;
transaction.Commit();
}
catch (Exception ex)
{
transaction.RollBack();
ShowMessage("消息", $"视图({viewName})新建失败,错误详情:" + ex.ToString());
}
}
}
// 渲染处理
using (var transaction = new Transaction(doc, "EarthworkBlocking." + nameof(btn_Preview_Click)))
{
transaction.Start();
//var defaultSettings = new OverrideGraphicSettings();
//defaultSettings.SetSurfaceTransparency(50);
//SetAllCategories(view, defaultSettings);
foreach (var block in Blocking.Blocks)
{
OverrideGraphicSettings setting = new OverrideGraphicSettings();
setting.SetProjectionFillPatternId(EarthworkBlockCPSettings.GetDefaultFillPatternId(doc));
if (block.ImplementationInfo.IsSettled)
{
setting.SetSurfaceTransparency(0);
setting.SetProjectionFillColor(new Autodesk.Revit.DB.Color(Blocking.ColorForSettled.R, Blocking.ColorForSettled.G, Blocking.ColorForSettled.B));
}
else
{
setting.SetSurfaceTransparency(0);
setting.SetProjectionFillColor(new Autodesk.Revit.DB.Color(Blocking.ColorForUnsettled.R, Blocking.ColorForUnsettled.G, Blocking.ColorForUnsettled.B));
}
foreach (var elementId in block.ElementIds)
{
//if (view.Document.GetElement(elementId) != null)
view.SetElementOverrides(elementId, setting);
}
}
transaction.Commit();
}
m_UIDoc.ActiveView = view;
ShowDialogType = ShowDialogType.ViewCompletion;
DialogResult = DialogResult.Retry;
//SaveDataGridViewSelection();
this.Close();
//ShowMessage("消息", $"三维视图({viewName})更新成功");
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
FilteredElementCollector elementsInView = new FilteredElementCollector(doc);
FillPatternElement solidFillPattern = elementsInView.OfClass(typeof(FillPatternElement)).Cast <FillPatternElement>().First(a => a.GetFillPattern().IsSolidFill);
List <BuiltInCategory> builtInCats = new List <BuiltInCategory>();
builtInCats.Add(BuiltInCategory.OST_StructuralFraming);
builtInCats.Add(BuiltInCategory.OST_Walls);
builtInCats.Add(BuiltInCategory.OST_Floors);
builtInCats.Add(BuiltInCategory.OST_StructuralColumns);
builtInCats.Add(BuiltInCategory.OST_StructuralFoundation);
ElementMulticategoryFilter filter1 = new ElementMulticategoryFilter(builtInCats);
IList <Element> allElementsInView = new FilteredElementCollector(doc, doc.ActiveView.Id).WherePasses(filter1).WhereElementIsNotElementType().ToElements();
var grouped = allElementsInView.GroupBy(x => x.GetTypeId());
Random pRand = new Random();
//TaskDialog.Show("r", grouped.First().First().Name);
OverrideGraphicSettings ogs = new OverrideGraphicSettings();
#if REVIT2020
ogs.SetSurfaceForegroundPatternId(solidFillPattern.Id);
#else
ogs.SetProjectionFillPatternId(solidFillPattern.Id);
#endif
using (Transaction t = new Transaction(doc, "Override Colors"))
{
t.Start();
foreach (var element in grouped)
{
byte iR, iG, iB;
iR = Convert.ToByte(pRand.Next(0, 255));
iG = Convert.ToByte(pRand.Next(0, 255));
iB = Convert.ToByte(pRand.Next(0, 255));
Autodesk.Revit.DB.Color pcolor = new Autodesk.Revit.DB.Color(iR, iG, iB);
#if REVIT2020
ogs.SetSurfaceForegroundPatternColor(pcolor);
#else
ogs.SetProjectionFillColor(pcolor);
#endif
try
{
foreach (FamilyInstance item in element)
{
doc.ActiveView.SetElementOverrides(item.Id, ogs);
}
}
catch
{
}
}
t.Commit();
}
return(Result.Succeeded);
}
private static void AddOverride2(Document doc, View view, ElementId pattern, List <List <string> > category_colors)
{
try
{
FilteredElementCollector col
= new FilteredElementCollector(doc, view.Id)
.WhereElementIsNotElementType();
StringBuilder sb = new StringBuilder();
using (Transaction tx = new Transaction(doc))
{
var tohide = new List <ElementId>();
tx.Start("SetViewtx");
try
{
foreach (Element elem in col)
{
try
{
// var catid = elem.Category.Id.IntegerValue;
var elemBcCat = (BuiltInCategory)elem.Category.Id.IntegerValue;
string bcCat = elemBcCat.ToString();
var category_ovrs = category_colors.Where(x => x.First() == elemBcCat.ToString()).ToList();
if (category_ovrs.Count > 0)
{
var category_ovr = category_ovrs.First();
var r = Convert.ToByte(category_ovr[1]);
var g = Convert.ToByte(category_ovr[2]);
var b = Convert.ToByte(category_ovr[3]);
var color_c = new Color(r, g, b);
var gSettings = new OverrideGraphicSettings();
//gSettings.
gSettings.SetCutFillColor(color_c);
gSettings.SetCutLineColor(color_c);
gSettings.SetCutFillPatternVisible(true);
gSettings.SetCutFillPatternId(pattern);
gSettings.SetProjectionFillColor(color_c);
gSettings.SetProjectionLineColor(color_c);
gSettings.SetProjectionFillPatternId(pattern);
view.SetElementOverrides(elem.Id, gSettings);
}
else
{
//!elem.Category.HasMaterialQuantities ||
if (elemBcCat.ToString().Contains("Tag") || elemBcCat.ToString().Contains("Arrow") ||
elemBcCat.ToString().Contains("Text") || elemBcCat.ToString().Contains("Annotation") ||
elemBcCat.ToString().Contains("Line"))
{
tohide.Add(elem.Id);
}
}
}
catch (Exception e)
{
sb.AppendLine();
sb.Append("Fail--OVERRIDES:" + view.ViewName + e.ToString());
//File.AppendAllText(FileManager.logfile, sb.ToString() + "\n");
}
}
}
catch (Exception)
{
// TaskDialog.Show("x", e.ToString());
}
SelectionFilterElement filterElement = SelectionFilterElement.Create(doc, "tags filter");
filterElement.SetElementIds(tohide);
// doc.Regenerate();
view.AddFilter(filterElement.Id);
view.SetFilterVisibility(filterElement.Id, false);
// view.
tx.Commit();
}
}
catch (Exception) { }
}