/// <summary>
/// Calculates directions between locations.\n
/// You can search for directions for several modes of transportation, include transit, driving, walking or cycling. \n
/// Directions may specify origins, destinations as latitude/longitude coordinates.
/// </summary>
/// <param name="origin">The address from which you wish to calculate directions.</param>
/// <param name="destination">The address from which you wish to calculate directions.</param>
/// <param name="mode">Specifies the mode of transport to use when calculating directions.</param>
/// <param name="waypoints">
/// Specifies an array of waypoints. \n
/// Waypoints alter a route by routing it through the specified location(s). \n
/// A waypoint is specified as either a latitude/longitude coordinate or as an address which will be geocoded. \n
/// Waypoints are only supported for driving, walking and bicycling directions.
/// </param>
/// <param name="alternatives">
/// If set to true, specifies that the Directions service may provide more than one route alternative in the response. \n
/// Note that providing route alternatives may increase the response time from the server.
/// </param>
/// <param name="avoid">Indicates that the calculated route(s) should avoid the indicated features.</param>
/// <param name="units">
/// Specifies the unit system to use when displaying results.\n
/// Note: this unit system setting only affects the text displayed within distance fields. The distance fields also contain values which are always expressed in meters.
/// </param>
/// <param name="region">Specifies the region code, specified as a ccTLD ("top-level domain") two-character value.</param>
/// <param name="departure_time">
/// Specifies the desired time of departure. \n
/// You can specify the time as an integer in seconds since midnight, January 1, 1970 UTC. \n
/// Alternatively, you can specify a value of now, which sets the departure time to the current time (correct to the nearest second).\n
/// The departure time may be specified in two cases:\n
/// For transit directions: You can optionally specify one of departure_time or arrival_time. If neither time is specified, the departure_time defaults to now (that is, the departure time defaults to the current time).\n
/// For driving directions: Google Maps API for Work customers can specify the departure_time to receive trip duration considering current traffic conditions. The departure_time must be set to within a few minutes of the current time.
/// </param>
/// <param name="arrival_time">
/// Specifies the desired time of arrival for transit directions, in seconds since midnight, January 1, 1970 UTC. \n
/// You can specify either departure_time or arrival_time, but not both. \n
/// Note that arrival_time must be specified as an integer.
/// </param>
/// <param name="language">
/// Specifies the language in which to return results.\n
/// Note that we often update supported languages so this list may not be exhaustive.\n
/// If language is not supplied, the service will attempt to use the native language of the domain from which the request is sent.
/// </param>
/// <returns>Instance of the search query.</returns>
public static OnlineMapsFindDirectionAdvanced Find(
string origin,
string destination,
OnlineMapsFindDirectionMode mode = OnlineMapsFindDirectionMode.driving,
string[] waypoints = null,
bool alternatives = false,
OnlineMapsFindDirectionAvoid avoid = OnlineMapsFindDirectionAvoid.none,
OnlineMapsFindDirectionUnits units = OnlineMapsFindDirectionUnits.metric,
string region = null,
long departure_time = -1,
long arrival_time = -1,
string language = null)
{
OnlineMapsFindDirectionAdvanced query = new OnlineMapsFindDirectionAdvanced(new Params(origin, destination)
{
mode = mode,
waypoints = waypoints != null? waypoints.Cast <object>().ToArray(): null,
alternatives = alternatives,
avoid = avoid,
units = units,
region = region,
departure_time = departure_time > 0? (object)departure_time: null,
arrival_time = arrival_time > 0? (long?)arrival_time: null,
language = language
});
OnlineMaps.instance.AddGoogleAPIQuery(query);
return(query);
}
private OnlineMapsFindDirectionAdvanced(string origin,
string destination,
OnlineMapsFindDirectionMode mode = OnlineMapsFindDirectionMode.driving,
string[] waypoints = null,
bool alternatives = false,
OnlineMapsFindDirectionAvoid avoid = OnlineMapsFindDirectionAvoid.none,
OnlineMapsFindDirectionUnits units = OnlineMapsFindDirectionUnits.metric,
string region = null,
long departure_time = -1,
long arrival_time = -1,
string language = null)
{
_status = OnlineMapsQueryStatus.downloading;
string url = "https://maps.google.com/maps/api/directions/xml?origin={0}&destination={1}&sensor=false";
url = string.Format(url, origin.Replace(" ", "+"), destination.Replace(" ", "+"));
if (mode != OnlineMapsFindDirectionMode.driving) url += "&mode=" + Enum.GetName(typeof (OnlineMapsFindDirectionMode), mode);
if (waypoints != null) url += "&waypoints=optimize:true|" + String.Join("|", waypoints).Replace(" ", "+");
if (alternatives) url += "&alternatives=true";
if (avoid != OnlineMapsFindDirectionAvoid.none) url += "&avoid=" + Enum.GetName(typeof(OnlineMapsFindDirectionAvoid), avoid);
if (units != OnlineMapsFindDirectionUnits.metric) url += "&units" + Enum.GetName(typeof(OnlineMapsFindDirectionUnits), units);
if (!string.IsNullOrEmpty(region)) url += "®ion=" + region;
if (departure_time != -1) url += "&departure_time=" + departure_time;
if (arrival_time != -1) url += "&arrival_time=" + arrival_time;
if (!string.IsNullOrEmpty(language)) url += "&language=" + language;
www = OnlineMapsUtils.GetWWW(url);
}
private OnlineMapsFindDirectionAdvanced(string origin,
string destination,
OnlineMapsFindDirectionMode mode = OnlineMapsFindDirectionMode.driving,
string[] waypoints = null,
bool alternatives = false,
OnlineMapsFindDirectionAvoid avoid = OnlineMapsFindDirectionAvoid.none,
OnlineMapsFindDirectionUnits units = OnlineMapsFindDirectionUnits.metric,
string region = null,
long departure_time = -1,
long arrival_time = -1,
string language = null)
{
_status = OnlineMapsQueryStatus.downloading;
string url = "https://maps.google.com/maps/api/directions/xml?origin={0}&destination={1}&sensor=false";
url = string.Format(url, origin.Replace(" ", "+"), destination.Replace(" ", "+"));
if (mode != OnlineMapsFindDirectionMode.driving)
{
url += "&mode=" + Enum.GetName(typeof(OnlineMapsFindDirectionMode), mode);
}
if (waypoints != null)
{
url += "&waypoints=optimize:true|" + String.Join("|", waypoints).Replace(" ", "+");
}
if (alternatives)
{
url += "&alternatives=true";
}
if (avoid != OnlineMapsFindDirectionAvoid.none)
{
url += "&avoid=" + Enum.GetName(typeof(OnlineMapsFindDirectionAvoid), avoid);
}
if (units != OnlineMapsFindDirectionUnits.metric)
{
url += "&units" + Enum.GetName(typeof(OnlineMapsFindDirectionUnits), units);
}
if (!string.IsNullOrEmpty(region))
{
url += "®ion=" + region;
}
if (departure_time != -1)
{
url += "&departure_time=" + departure_time;
}
if (arrival_time != -1)
{
url += "&arrival_time=" + arrival_time;
}
if (!string.IsNullOrEmpty(language))
{
url += "&language=" + language;
}
www = OnlineMapsUtils.GetWWW(url);
}
/// <summary>
/// Calculates directions between locations.\n
/// You can search for directions for several modes of transportation, include transit, driving, walking or cycling. \n
/// Directions may specify origins, destinations as latitude/longitude coordinates.
/// </summary>
/// <param name="origin">The address from which you wish to calculate directions.</param>
/// <param name="destination">Latitude/longitude value from which you wish to calculate directions.</param>
/// <param name="mode">Specifies the mode of transport to use when calculating directions.</param>
/// <param name="waypoints">
/// Specifies an array of waypoints. \n
/// Waypoints alter a route by routing it through the specified location(s). \n
/// A waypoint is specified as either a latitude/longitude coordinate or as an address which will be geocoded. \n
/// Waypoints are only supported for driving, walking and bicycling directions.
/// </param>
/// <param name="alternatives">
/// If set to true, specifies that the Directions service may provide more than one route alternative in the response. \n
/// Note that providing route alternatives may increase the response time from the server.
/// </param>
/// <param name="avoid">Indicates that the calculated route(s) should avoid the indicated features.</param>
/// <param name="units">
/// Specifies the unit system to use when displaying results.\n
/// Note: this unit system setting only affects the text displayed within distance fields. The distance fields also contain values which are always expressed in meters.
/// </param>
/// <param name="region">Specifies the region code, specified as a ccTLD ("top-level domain") two-character value.</param>
/// <param name="departure_time">
/// Specifies the desired time of departure. \n
/// You can specify the time as an integer in seconds since midnight, January 1, 1970 UTC. \n
/// Alternatively, you can specify a value of now, which sets the departure time to the current time (correct to the nearest second).\n
/// The departure time may be specified in two cases:\n
/// For transit directions: You can optionally specify one of departure_time or arrival_time. If neither time is specified, the departure_time defaults to now (that is, the departure time defaults to the current time).\n
/// For driving directions: Google Maps API for Work customers can specify the departure_time to receive trip duration considering current traffic conditions. The departure_time must be set to within a few minutes of the current time.
/// </param>
/// <param name="arrival_time">
/// Specifies the desired time of arrival for transit directions, in seconds since midnight, January 1, 1970 UTC. \n
/// You can specify either departure_time or arrival_time, but not both. \n
/// Note that arrival_time must be specified as an integer.
/// </param>
/// <param name="language">
/// Specifies the language in which to return results.\n
/// Note that we often update supported languages so this list may not be exhaustive.\n
/// If language is not supplied, the service will attempt to use the native language of the domain from which the request is sent.
/// </param>
/// <returns>Instance of the search query.</returns>
public static OnlineMapsFindDirectionAdvanced Find(
string origin,
Vector2 destination,
OnlineMapsFindDirectionMode mode = OnlineMapsFindDirectionMode.driving,
string[] waypoints = null,
bool alternatives = false,
OnlineMapsFindDirectionAvoid avoid = OnlineMapsFindDirectionAvoid.none,
OnlineMapsFindDirectionUnits units = OnlineMapsFindDirectionUnits.metric,
string region = null,
long departure_time = -1,
long arrival_time = -1,
string language = null)
{
return(Find(origin, destination.y + "," + destination.x, mode, waypoints, alternatives, avoid, units, region, departure_time, arrival_time, language));
}
/// <summary>
/// Calculates directions between locations.\n
/// You can search for directions for several modes of transportation, include transit, driving, walking or cycling. \n
/// Directions may specify origins, destinations as latitude/longitude coordinates.
/// </summary>
/// <param name="origin">The address from which you wish to calculate directions.</param>
/// <param name="destination">The address from which you wish to calculate directions.</param>
/// <param name="mode">Specifies the mode of transport to use when calculating directions.</param>
/// <param name="waypoints">
/// Specifies an array of waypoints. \n
/// Waypoints alter a route by routing it through the specified location(s). \n
/// A waypoint is specified as either a latitude/longitude coordinate or as an address which will be geocoded. \n
/// Waypoints are only supported for driving, walking and bicycling directions.
/// </param>
/// <param name="alternatives">
/// If set to true, specifies that the Directions service may provide more than one route alternative in the response. \n
/// Note that providing route alternatives may increase the response time from the server.
/// </param>
/// <param name="avoid">Indicates that the calculated route(s) should avoid the indicated features.</param>
/// <param name="units">
/// Specifies the unit system to use when displaying results.\n
/// Note: this unit system setting only affects the text displayed within distance fields. The distance fields also contain values which are always expressed in meters.
/// </param>
/// <param name="region">Specifies the region code, specified as a ccTLD ("top-level domain") two-character value.</param>
/// <param name="departure_time">
/// Specifies the desired time of departure. \n
/// You can specify the time as an integer in seconds since midnight, January 1, 1970 UTC. \n
/// Alternatively, you can specify a value of now, which sets the departure time to the current time (correct to the nearest second).\n
/// The departure time may be specified in two cases:\n
/// For transit directions: You can optionally specify one of departure_time or arrival_time. If neither time is specified, the departure_time defaults to now (that is, the departure time defaults to the current time).\n
/// For driving directions: Google Maps API for Work customers can specify the departure_time to receive trip duration considering current traffic conditions. The departure_time must be set to within a few minutes of the current time.
/// </param>
/// <param name="arrival_time">
/// Specifies the desired time of arrival for transit directions, in seconds since midnight, January 1, 1970 UTC. \n
/// You can specify either departure_time or arrival_time, but not both. \n
/// Note that arrival_time must be specified as an integer.
/// </param>
/// <param name="language">
/// Specifies the language in which to return results.\n
/// Note that we often update supported languages so this list may not be exhaustive.\n
/// If language is not supplied, the service will attempt to use the native language of the domain from which the request is sent.
/// </param>
/// <returns>Instance of the search query.</returns>
public static OnlineMapsFindDirectionAdvanced Find(
string origin,
string destination,
OnlineMapsFindDirectionMode mode = OnlineMapsFindDirectionMode.driving,
string[] waypoints = null,
bool alternatives = false,
OnlineMapsFindDirectionAvoid avoid = OnlineMapsFindDirectionAvoid.none,
OnlineMapsFindDirectionUnits units = OnlineMapsFindDirectionUnits.metric,
string region = null,
long departure_time = -1,
long arrival_time = -1,
string language = null)
{
OnlineMapsFindDirectionAdvanced query = new OnlineMapsFindDirectionAdvanced(origin, destination, mode, waypoints, alternatives, avoid, units, region, departure_time, arrival_time, language);
OnlineMaps.instance.AddGoogleAPIQuery(query);
return(query);
}
/// <summary>
/// Calculates directions between locations.\n
/// You can search for directions for several modes of transportation, include transit, driving, walking or cycling. \n
/// Directions may specify origins, destinations as latitude/longitude coordinates.
/// </summary>
/// <param name="origin">The address from which you wish to calculate directions.</param>
/// <param name="destination">The address from which you wish to calculate directions.</param>
/// <param name="mode">Specifies the mode of transport to use when calculating directions.</param>
/// <param name="waypoints">
/// Specifies an array of waypoints. \n
/// Waypoints alter a route by routing it through the specified location(s). \n
/// A waypoint is specified as either a latitude/longitude coordinate or as an address which will be geocoded. \n
/// Waypoints are only supported for driving, walking and bicycling directions.
/// </param>
/// <param name="alternatives">
/// If set to true, specifies that the Directions service may provide more than one route alternative in the response. \n
/// Note that providing route alternatives may increase the response time from the server.
/// </param>
/// <param name="avoid">Indicates that the calculated route(s) should avoid the indicated features.</param>
/// <param name="units">
/// Specifies the unit system to use when displaying results.\n
/// Note: this unit system setting only affects the text displayed within distance fields. The distance fields also contain values which are always expressed in meters.
/// </param>
/// <param name="region">Specifies the region code, specified as a ccTLD ("top-level domain") two-character value.</param>
/// <param name="departure_time">
/// Specifies the desired time of departure. \n
/// You can specify the time as an integer in seconds since midnight, January 1, 1970 UTC. \n
/// Alternatively, you can specify a value of now, which sets the departure time to the current time (correct to the nearest second).\n
/// The departure time may be specified in two cases:\n
/// For transit directions: You can optionally specify one of departure_time or arrival_time. If neither time is specified, the departure_time defaults to now (that is, the departure time defaults to the current time).\n
/// For driving directions: Google Maps API for Work customers can specify the departure_time to receive trip duration considering current traffic conditions. The departure_time must be set to within a few minutes of the current time.
/// </param>
/// <param name="arrival_time">
/// Specifies the desired time of arrival for transit directions, in seconds since midnight, January 1, 1970 UTC. \n
/// You can specify either departure_time or arrival_time, but not both. \n
/// Note that arrival_time must be specified as an integer.
/// </param>
/// <param name="language">
/// Specifies the language in which to return results.\n
/// Note that we often update supported languages so this list may not be exhaustive.\n
/// If language is not supplied, the service will attempt to use the native language of the domain from which the request is sent.
/// </param>
/// <returns>Instance of the search query.</returns>
public static OnlineMapsFindDirectionAdvanced Find(
string origin,
string destination,
OnlineMapsFindDirectionMode mode = OnlineMapsFindDirectionMode.driving,
string[] waypoints = null,
bool alternatives = false,
OnlineMapsFindDirectionAvoid avoid = OnlineMapsFindDirectionAvoid.none,
OnlineMapsFindDirectionUnits units = OnlineMapsFindDirectionUnits.metric,
string region = null,
long departure_time = -1,
long arrival_time = -1,
string language = null)
{
OnlineMapsFindDirectionAdvanced query = new OnlineMapsFindDirectionAdvanced(origin, destination, mode, waypoints, alternatives, avoid, units, region, departure_time, arrival_time, language);
OnlineMaps.instance.AddGoogleAPIQuery(query);
return query;
}
/// <summary>
/// Calculates directions between locations.\n
/// You can search for directions for several modes of transportation, include transit, driving, walking or cycling. \n
/// Directions may specify origins, destinations as latitude/longitude coordinates.
/// </summary>
/// <param name="origin">The address from which you wish to calculate directions.</param>
/// <param name="destination">Latitude/longitude value from which you wish to calculate directions.</param>
/// <param name="mode">Specifies the mode of transport to use when calculating directions.</param>
/// <param name="waypoints">
/// Specifies an array of waypoints. \n
/// Waypoints alter a route by routing it through the specified location(s). \n
/// A waypoint is specified as either a latitude/longitude coordinate or as an address which will be geocoded. \n
/// Waypoints are only supported for driving, walking and bicycling directions.
/// </param>
/// <param name="alternatives">
/// If set to true, specifies that the Directions service may provide more than one route alternative in the response. \n
/// Note that providing route alternatives may increase the response time from the server.
/// </param>
/// <param name="avoid">Indicates that the calculated route(s) should avoid the indicated features.</param>
/// <param name="units">
/// Specifies the unit system to use when displaying results.\n
/// Note: this unit system setting only affects the text displayed within distance fields. The distance fields also contain values which are always expressed in meters.
/// </param>
/// <param name="region">Specifies the region code, specified as a ccTLD ("top-level domain") two-character value.</param>
/// <param name="departure_time">
/// Specifies the desired time of departure. \n
/// You can specify the time as an integer in seconds since midnight, January 1, 1970 UTC. \n
/// Alternatively, you can specify a value of now, which sets the departure time to the current time (correct to the nearest second).\n
/// The departure time may be specified in two cases:\n
/// For transit directions: You can optionally specify one of departure_time or arrival_time. If neither time is specified, the departure_time defaults to now (that is, the departure time defaults to the current time).\n
/// For driving directions: Google Maps API for Work customers can specify the departure_time to receive trip duration considering current traffic conditions. The departure_time must be set to within a few minutes of the current time.
/// </param>
/// <param name="arrival_time">
/// Specifies the desired time of arrival for transit directions, in seconds since midnight, January 1, 1970 UTC. \n
/// You can specify either departure_time or arrival_time, but not both. \n
/// Note that arrival_time must be specified as an integer.
/// </param>
/// <param name="language">
/// Specifies the language in which to return results.\n
/// Note that we often update supported languages so this list may not be exhaustive.\n
/// If language is not supplied, the service will attempt to use the native language of the domain from which the request is sent.
/// </param>
/// <returns>Instance of the search query.</returns>
public static OnlineMapsFindDirectionAdvanced Find(
string origin,
Vector2 destination,
OnlineMapsFindDirectionMode mode = OnlineMapsFindDirectionMode.driving,
string[] waypoints = null,
bool alternatives = false,
OnlineMapsFindDirectionAvoid avoid = OnlineMapsFindDirectionAvoid.none,
OnlineMapsFindDirectionUnits units = OnlineMapsFindDirectionUnits.metric,
string region = null,
long departure_time = -1,
long arrival_time = -1,
string language = null)
{
return Find(origin, destination.y + "," + destination.x, mode, waypoints,
alternatives, avoid, units, region, departure_time, arrival_time, language);
}
