protected void cmdDelete_ServerClick(object sender, System.EventArgs e)
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
ArrayList array = this.gridHelper.GetCheckedRows();
if (array.Count > 0)
{
ArrayList oPBOMs = new ArrayList(array.Count);
foreach (UltraGridRow row in array)
{
object obj = this.GetEditObject(row);
if (obj != null)
{
oPBOMs.Add((OPBOM)obj);
}
}
this._opBOMFacade.DeleteOPBOM((OPBOM[])oPBOMs.ToArray(typeof(OPBOM)));
this.RequestData();
this.buttonHelper.PageActionStatusHandle(PageActionType.Delete);
}
}
public void SetUp()
{
persistBroker = new OLEDBPersistBroker("Provider=OraOLEDB.Oracle.1;Password=emes;Persist Security Info=True;User ID=emes;Data Source=sqcdemo");
opBOMFacade = new OPBOMFacade();
modelFacade = new ModelFacade();
sbomFacade = new SBOMFacade();
}
/// <summary>
/// ** nunit
/// </summary>
/// <param name="opItemControl"></param>
public void UpdateItemControl(OPItemControl opItemControl)
{
//add by crystal chu 2005/04/20 OPBOM是否在使用中
OPBOMFacade _opBOMFacade = new OPBOMFacade(this.DataProvider);
_opBOMFacade.OPBOMChangedCheck(opItemControl.ItemCode, opItemControl.OPBOMCode, opItemControl.OPBOMVersion, GlobalVariables.CurrentOrganizations.First().OrganizationID);
this._helper.UpdateDomainObject(opItemControl);
}
private int GetRowCount()
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
return(this._opBOMFacade.QueryOPBOMDetailCounts(FormatHelper.PKCapitalFormat(FormatHelper.CleanString(ItemCode)), OPID, OPBOMCode, OPBOMVersion, RouteCode, string.Empty, this.Actiontype, OrgID));
}
private object[] LoadDataSource(int inclusive, int exclusive)
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
return(this._opBOMFacade.QueryOPBOMDetail(FormatHelper.PKCapitalFormat(FormatHelper.CleanString(ItemCode)), OPID, OPBOMCode, OPBOMVersion, RouteCode, string.Empty, this.Actiontype, inclusive, exclusive, OrgID));
}
private void BuildOPBOM()
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
this._opBOMFacade.BuildOPBOM(ItemCode);
}
private int GetRowCount()
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
return(this._opBOMFacade.QueryOPBOMCount(
FormatHelper.PKCapitalFormat(FormatHelper.CleanString(this.txtItemCodeQuery.Text)),
FormatHelper.PKCapitalFormat(FormatHelper.CleanString(this.txtBOMCodeQuery.Text)), string.Empty, GlobalVariables.CurrentOrganizations.First().OrganizationID));
}
private object[] LoadDataSource(int inclusive, int exclusive)
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
return(this._opBOMFacade.QueryOPBOM(
FormatHelper.PKCapitalFormat(FormatHelper.CleanString(this.txtItemCodeQuery.Text)),
FormatHelper.CleanString(this.txtBOMCodeQuery.Text),
string.Empty,
inclusive, exclusive, GlobalVariables.CurrentOrganizations.First().OrganizationID));
}
private object GetEditObject(Infragistics.WebUI.UltraWebGrid.UltraGridRow row)
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
object obj = _opBOMFacade.GetOPBOM(row.Cells[1].Text, row.Cells[2].Text, row.Cells[7].Text, GlobalVariables.CurrentOrganizations.First().OrganizationID);
if (obj != null)
{
return((OPBOM)obj);
}
return(null);
}
private object GetEditObject(GridRecord row)
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
object obj = _opBOMFacade.GetOPBOMDetail(ItemCode, OPID, OPBOMCode, OPBOMVersion, row.Items.FindItemByKey("OPBOMItemCode").Value.ToString(), this.Actiontype.ToString(), GlobalVariables.CurrentOrganizations.First().OrganizationID);
if (obj != null)
{
return((OPBOMDetail)obj);
}
return(null);
}
/// <summary>
/// 添加opitemcontrol,必须先判断相同的控制信息是否已经被添加，如果没有添加，则
/// 其中的sequence取一组控制信息当中最大sequence加1
/// ** nunit
/// </summary>
/// <param name="opItemControl"></param>
public void AddOPItemControl(OPItemControl opItemControl)
{
if (opItemControl == null)
{
ExceptionManager.Raise(this.GetType(), "$Error_Null_Paramter");
// throw new RemotingException(ErrorCenter.GetErrorServerDescription(typeof(OPBOMFacade),String.Format(ErrorCenter.ERROR_ARGUMENT_NULL,"opItemControl")));
}
//add by crystal chu 2005/04/20 OPBOM是否在使用中
OPBOMFacade _opBOMFacade = new OPBOMFacade(this.DataProvider);
_opBOMFacade.OPBOMChangedCheck(opItemControl.ItemCode, opItemControl.OPBOMCode, opItemControl.OPBOMVersion, GlobalVariables.CurrentOrganizations.First().OrganizationID);
object[] objs = QueryOPBOMItemControl(opItemControl.ItemCode, opItemControl.OPBOMItemCode, opItemControl.OPBOMCode, opItemControl.OPBOMVersion, opItemControl.OPID,
opItemControl.DateCodeStart, opItemControl.DateCodeEnd, opItemControl.VendorCode, opItemControl.VendorItemCode, opItemControl.ItemVersion,
opItemControl.BIOSVersion, opItemControl.PCBAVersion, opItemControl.CardStart, opItemControl.CardEnd);
if (objs != null)
{
ExceptionManager.Raise(this.GetType(), "$Error_OPItemControl_Exist");
// throw new RemotingException(ErrorCenter.GetErrorServerDescription(typeof(OPItemControlFacade),String.Format(ErrorCenter.ERROR_ADDOPITEMCONTROL, opItemControl.OPBOMItemCode)));
}
objs = QueryOPBOMItemControl(opItemControl.ItemCode, opItemControl.OPBOMItemCode, opItemControl.OPBOMCode, opItemControl.OPBOMVersion, opItemControl.OPID, string.Empty,
string.Empty, string.Empty, string.Empty, string.Empty, string.Empty, string.Empty, string.Empty, string.Empty);
int sequence = 0;
if (objs != null)
{
sequence = System.Int32.Parse(((OPItemControl)objs[objs.Length - 1]).Sequence.ToString()) + 1;
}
try
{
//Laws Lu,2006/11/13 uniform system collect date
DBDateTime dbDateTime;
dbDateTime = FormatHelper.GetNowDBDateTime(DataProvider);
opItemControl.MaintainDate = dbDateTime.DBDate;
opItemControl.MaintainTime = dbDateTime.DBTime;
opItemControl.Sequence = sequence;
this.DataProvider.Insert(opItemControl);
}
catch (Exception ex)
{
ExceptionManager.Raise(this.GetType(), "$Error_AddOPItemControl", String.Format("$OPBOMItemcode='{0}'", opItemControl.OPBOMItemCode), ex);
// throw new RemotingException(ErrorCenter.GetErrorServerDescription(typeof(OPItemControl), String.Format(ErrorCenter.ERROR_ADDOPITEMCONTROL, opItemControl.OPBOMItemCode)), ex);
}
}
protected void cmdSave_ServerClick(object sender, System.EventArgs e)
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
object opbom = this.GetEditObject();
if (opbom != null)
{
this._opBOMFacade.UpdateOPBOM((OPBOM)opbom);
this.RequestData();
this.buttonHelper.PageActionStatusHandle(PageActionType.Save);
}
}
//Add By Bernard @ 2010-10-28
protected void ddlControlTypeEdit_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
this.ddlControlTypeEdit.Items.Clear();
string[] controls = this._opBOMFacade.GetItemControlTypes();
ddlControlTypeEdit.Items.Add(new ListItem("", ""));
for (int i = 0; i < controls.Length; i++)
{
this.ddlControlTypeEdit.Items.Add(new ListItem(this.languageComponent1.GetString(controls[i]), controls[i]));
}
}
}
/// <summary>
/// 判断该bom是否已经被工单使用，如果使用则对应opbom上料料品的控制设置则不可以被删除
/// ** nunit
/// </summary>
/// <param name="opItemControl"></param>
public void DeleteItemControl(OPItemControl opItemControl)
{
if (opItemControl == null)
{
ExceptionManager.Raise(this.GetType(), "$Error_Null_Paramter");
// throw new RemotingException(ErrorCenter.GetErrorServerDescription(typeof(OPBOMFacade),String.Format(ErrorCenter.ERROR_ARGUMENT_NULL,"opItemControl")));
}
//add by crystal chu 2005/04/20 OPBOM是否在使用中
OPBOMFacade _opBOMFacade = new OPBOMFacade(this.DataProvider);
_opBOMFacade.OPBOMChangedCheck(opItemControl.ItemCode, opItemControl.OPBOMCode, opItemControl.OPBOMVersion, GlobalVariables.CurrentOrganizations.First().OrganizationID);
try
{
this.DataProvider.Delete(opItemControl);
}
catch (Exception ex)
{
ExceptionManager.Raise(this.GetType(), "$Error_DeleteItemControl", String.Format("[$OPBOMItemcode='{0}']", opItemControl.OPBOMItemCode), ex);
// throw new RemotingException(ErrorCenter.GetErrorServerDescription(typeof(OPItemControl), string.Format(ErrorCenter.ERROR_DELETEITEMCONTROL,opItemControl.OPBOMItemCode)), ex);
}
}
/// <summary>
/// 根据OnWIPItem的上料记录，反推上料的BOM，然后建立对应的下料BOM
/// </summary>
private Messages BuildOPBomKeyPartsByOnWIPItem(string rcard, ProductInfo product, OnWIPItem[] wipItems)
{
Messages msg = new Messages();
MO mo;
MOFacade moFacade = new MOFacade(DataProvider);
if (product != null && product.CurrentMO != null)
{
mo = product.CurrentMO;
}
else
{
mo = (MO)moFacade.GetMO(product.LastSimulation.MOCode);
}
OPBOMFacade opBOMFacade = new OPBOMFacade(DataProvider);
object[] objOpBoms = opBOMFacade.GetOPBOMDetails(
product.LastSimulation.MOCode
, wipItems[0].RouteCode
, wipItems[0].OPCode);
for (int i = 0; objOpBoms != null && i < objOpBoms.Length; i++)
{
((OPBOMDetail)objOpBoms[i]).ActionType = (int)MaterialType.DropMaterial;
}
opBomKeyparts = new OPBomKeyparts(objOpBoms, Convert.ToInt32(mo.IDMergeRule), this.DataProvider);
if (opBomKeyparts.Count == 0)
{
msg.Add(new UserControl.Message("$CS_NOOPBomInfo $CS_Param_MOCode =" + product.LastSimulation.MOCode
+ " $CS_Param_RouteCode =" + wipItems[0].RouteCode
+ " $CS_Param_OPCode =" + wipItems[0].OPCode));
}
return(msg);
}
private object GetEditObject()
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
if (this.ValidateInput())
{
OPBOM oPBOM = this._opBOMFacade.CreateNewOPBOM();
oPBOM.ItemCode = FormatHelper.PKCapitalFormat(FormatHelper.CleanString(this.drpItemCodeEdit.SelectedValue, 40));
oPBOM.OPBOMCode = FormatHelper.PKCapitalFormat(FormatHelper.CleanString(this.txtOPBOMCodeEdit.Text, 40));
oPBOM.OPBOMDescription = FormatHelper.CleanString(this.txtDescriptionEdit.Text, 100);
oPBOM.OPBOMRoute = FormatHelper.CleanString(this.drpRouteCodeEdit.SelectedValue, 40);
//oPBOM.OPBOMVersion = FormatHelper.PKCapitalFormat(Const.BOM_VERSION);
oPBOM.MaintainUser = this.GetUserCode();
oPBOM.OrganizationID = GlobalVariables.CurrentOrganizations.First().OrganizationID;
return(oPBOM);
}
else
{
return(null);
}
}
public Messages DeductQty(ActionEventArgs actionEventArgs, DataCollectFacade dataCollectFacade, MINNO minno)
{
SystemSettingFacade systemSettingFacade = new SystemSettingFacade(this.DataProvider);
MaterialFacade materialFacade = new MaterialFacade(this.DataProvider);
MOFacade moFacade = new MOFacade(this.DataProvider);
OPBOMFacade opbomFacade = new OPBOMFacade(this.DataProvider);
ItemFacade itemFacade = new ItemFacade(this.DataProvider);
InventoryFacade inventoryFacade = new InventoryFacade(this.DataProvider);
LotSimulation simulation = ((CINNOActionEventArgs)actionEventArgs).ProductInfo.NowSimulation;
LotSimulationReport simulationReport = ((CINNOActionEventArgs)actionEventArgs).ProductInfo.NowSimulationReport;
Messages returnValue = new Messages();
string lotNoList = string.Empty;// add by Jarvis For onWipItem
ProductInfo productionInfo = actionEventArgs.ProductInfo;
LotSimulation sim = actionEventArgs.ProductInfo.NowSimulation;
int orgid = actionEventArgs.ProductInfo.Resource.OrganizationID;
MO mo = actionEventArgs.ProductInfo.CurrentMO;
if (mo == null)
{
mo = moFacade.GetMO(sim.MOCode) as MO;
}
//获取当前工单号
string moCode = productionInfo.NowSimulation.MOCode;
//获取当前工序号
string opCode = productionInfo.NowSimulation.OPCode;
//获取当前产品号
string itemCode = productionInfo.NowSimulation.ItemCode;
//获取途程代码
string routeCode = productionInfo.NowSimulation.RouteCode;
string resCode = productionInfo.Resource.ResourceCode;
//获取ORGID
int orgID = productionInfo.Resource.OrganizationID;
string moBomVer = string.Empty;
object objMo = moFacade.GetMO(moCode);
if (objMo != null)
{
moBomVer = (objMo as MO).BOMVersion;
}
//获取物料名称
string MItemName = string.Empty;
Domain.MOModel.Material material = ((Domain.MOModel.Material)itemFacade.GetMaterial(minno.MItemCode, orgID));
if (material != null)
{
MItemName = material.MaterialName;
}
//添加产品已上料扣料判断 tblonwip
string lotNo = productionInfo.NowSimulation.LotCode;
decimal seq = productionInfo.NowSimulation.LotSeq;
//object[] objOnWip = dataCollectFacade.QueryLotOnWIP(lotNo, moCode, opCode, "CINNO");
//if (objOnWip != null && objOnWip.Length > 0)
//{
// return returnValue;
//}
//remove by Jarvis 不检查工单BOM 20120321
//object[] objMoBoms = moFacade.QueryMoBom(sim.ItemCode, minno.MItemCode, sim.MOCode);//检查工单BOM是否有该首选料, Jarvis 20120319
//if (objMoBoms == null)
//{
// throw new Exception("$CS_ItemCode[" + minno.MItemCode + "]" + "$Error_NotExistInMoBOM" + String.Format("[$MOCode='{0}']", sim.MOCode));
//}
object[] opbomObjs = opbomFacade.QueryOPBOMDetail(sim.ItemCode, minno.MItemCode, string.Empty, string.Empty, string.Empty, sim.RouteCode, opCode, (int)MaterialType.CollectMaterial, int.MinValue, int.MaxValue, orgid, true);
if (opbomObjs == null)
{
throw new Exception("$CS_ItemCode[" + minno.MItemCode + "]" + "$Error_NotExistInOPBOM" + String.Format("[$ItemCode='{0}']", sim.ItemCode));
}
object[] moRouteObjs = moFacade.QueryMORoutes(sim.MOCode, sim.RouteCode);
if (moRouteObjs == null)
{
throw new Exception("$Error_MORouteNOExist");
}
bool iflag = false;
decimal iOPBOMItemQty = 0;
//需要比对的子阶料料号 比对成功的 只在工单生产BOM 中
if (opbomObjs == null)//去掉检查工单BOM是否为空
{
return(returnValue);
}
//以工单标准BOM为基准,扣减当前工单的倒冲库存地（tblmo. EATTRIBUTE2）中相对应的库存信息
//for (int n = 0; n < objMoBoms.Length; n++)//去掉工单BOM 20120321 Jarvis
//{
//求得opbom中对应的料品
string TempMOBOMItemCode = minno.MItemCode;
iflag = false;
iOPBOMItemQty = 0;
for (int j = 0; j < opbomObjs.Length; j++)
{
if (TempMOBOMItemCode.ToUpper() == ((OPBOMDetail)opbomObjs[j]).OPBOMItemCode.ToUpper() ||
TempMOBOMItemCode.ToUpper() == ((OPBOMDetail)opbomObjs[j]).OPBOMSourceItemCode.ToUpper())
{ //子阶料存在或有替代料可用
iflag = true;
//TempMOBOMItemCode = ((OPBOMDetail)opbomObjs[j]).OPBOMItemCode;//remove by Jarvis 20120316
//For 替代料，记录首选料号,Jarvis 20120316
//TempMOBOMItemCode = ((MOBOM)objMoBoms[n]).MOBOMItemCode;
iOPBOMItemQty = (decimal)((OPBOMDetail)opbomObjs[j]).OPBOMItemQty;
iOPBOMItemQty *= sim.LotQty;
break;
}
}
//比对成功：子阶料料号一致
if (iflag)//子阶料不存在， 即只在工单标准bom中
{
//object[] objInfos = inventoryFacade.QueryStorageInfoByIDAndMCode(mo.EAttribute2, TempMOBOMItemCode.ToUpper());
object[] objInfos = inventoryFacade.QueryStorageInfoByIDAndMCode(TempMOBOMItemCode.ToUpper());
if (objInfos == null)
{
throw new Exception("$CS_ItemCode[" + minno.MItemCode + "]" + "$CS_StorageQty_ERROR");
}
//获取物料的总库存数，Jarvis 20120316
//decimal total = inventoryFacade.GetStorageQty(mo.EAttribute2, TempMOBOMItemCode.ToUpper());
decimal total = inventoryFacade.GetStorageQty(TempMOBOMItemCode.ToUpper());
if (total < iOPBOMItemQty)
{
throw new Exception("$CS_ItemCode[" + minno.MItemCode + "]" + "$CS_StorageQty_ERROR");
}
#region //先判断备料批号中的数据量，不够扣减就退出
decimal temlotQty = 0;
object[] objStorageLotInfo = null;
ArrayList StorageLotInfoList = new ArrayList();
//获取子阶料的备料信息，Jarvis 20120316，按Seq排序
object[] minnoss = materialFacade.QueryMINNO_New(moCode, routeCode, opCode, resCode, moBomVer, minno.MSourceItemCode); //获取同一首选料的备料信息，Jarvis 20120321
//获取备料信息中可扣减数，Jarvis 20120316
foreach (MINNO temp in minnoss)
{
//objStorageLotInfo = inventoryFacade.QueryStorageLot(temp.LotNO, mo.EAttribute2, temp.MItemCode);
objStorageLotInfo = inventoryFacade.QueryStorageLot(temp.LotNO, temp.MItemCode);
if (objStorageLotInfo != null)
{
foreach (StorageLotInfo lotInfo in objStorageLotInfo)
{
temlotQty += lotInfo.Lotqty;
if (lotInfo.Lotqty <= 0) //如果批数量为0不记录该批
{
continue;
}
StorageLotInfoList.Add(lotInfo);
}
}
}
if (temlotQty < iOPBOMItemQty)
{
throw new Exception("$CS_ItemCode[" + minno.MItemCode + "-" + MItemName + "]" + "$CS_DeductQty_ERROR");
}
#endregion
#region 数量可以扣减
foreach (StorageLotInfo lotInfo in StorageLotInfoList)
{
if (iOPBOMItemQty > lotInfo.Lotqty)
{
iOPBOMItemQty = iOPBOMItemQty - lotInfo.Lotqty;
inventoryFacade.DeleteStorageLotInfo(lotInfo);
this.UpdateStorageQty(lotInfo, inventoryFacade, lotInfo.Lotqty);
lotNoList += ("," + lotInfo.Lotno + ",");
#region 记录过账信息
LotOnWipItem wipItem = new LotOnWipItem();
MINNO minnoTemp = null;
object[] minnoTemps = materialFacade.QueryMINNO(moCode, routeCode, opCode, resCode, moBomVer, lotInfo.Mcode, minno.MSourceItemCode, lotInfo.Lotno);
if (minnoTemps != null)
{
minnoTemp = (MINNO)minnoTemps[0];
}
wipItem.DateCode = minnoTemp.DateCode;
wipItem.LOTNO = minnoTemp.LotNO;
wipItem.MItemCode = minnoTemp.MItemCode;
wipItem.VendorCode = minnoTemp.VendorCode;
wipItem.VendorItemCode = minnoTemp.VendorItemCode;
wipItem.Version = minnoTemp.Version;
wipItem.MSeq = seqForDeductQty;
wipItem.MCardType = minno.EAttribute1;
wipItem.Eattribute1 = simulation.EAttribute1;
wipItem.ItemCode = simulation.ItemCode;
wipItem.ResCode = simulation.ResCode;
wipItem.RouteCode = simulation.RouteCode;
wipItem.LotCode = simulation.LotCode;
wipItem.LotSeq = simulation.LotSeq;
wipItem.SegmentCode = simulationReport.SegmentCode;
wipItem.BeginShiftCode = simulationReport.BeginShiftCode;
wipItem.ShiftTypeCode = simulationReport.ShiftTypeCode;
wipItem.StepSequenceCode = simulationReport.StepSequenceCode;
wipItem.BeginTimePeriodCode = simulationReport.BeginTimePeriodCode;
wipItem.MOCode = simulation.MOCode;
wipItem.ModelCode = simulation.ModelCode;
wipItem.OPCode = simulation.OPCode;
wipItem.CollectStatus = simulation.CollectStatus;
wipItem.BeginDate = simulation.BeginDate;
wipItem.BeginTime = simulation.BeginTime;
wipItem.MaintainUser = simulation.MaintainUser;
wipItem.TransStatus = TransactionStatus.TransactionStatus_YES;
wipItem.Qty = lotInfo.Lotqty;
wipItem.ActionType = (int)MaterialType.CollectMaterial;
wipItem.MOSeq = simulation.MOSeq;
dataCollectFacade.AddLotOnWIPItem(wipItem);
LotSimulationReport simulationRpt = dataCollectFacade.GetLastLotSimulationReport(wipItem.LotCode);
if (simulationRpt != null)
{
dataCollectFacade.UpdateLotSimulationReport(simulationRpt);
}
seqForDeductQty++;
#endregion
}
else
{
lotInfo.Lotqty = lotInfo.Lotqty - iOPBOMItemQty;
inventoryFacade.UpdateStorageLotInfo(lotInfo);
this.UpdateStorageQty(lotInfo, inventoryFacade, iOPBOMItemQty);
#region 记录过账信息
LotOnWipItem wipItem = new LotOnWipItem();
MINNO minnoTemp = null;
object[] minnoTemps = materialFacade.QueryMINNO(moCode, routeCode, opCode, resCode, moBomVer, lotInfo.Mcode, minno.MSourceItemCode, lotInfo.Lotno);
if (minnoTemps != null)
{
minnoTemp = (MINNO)minnoTemps[0];
}
wipItem.DateCode = minnoTemp.DateCode;
wipItem.LOTNO = minnoTemp.LotNO;
wipItem.MItemCode = minnoTemp.MItemCode;
wipItem.VendorCode = minnoTemp.VendorCode;
wipItem.VendorItemCode = minnoTemp.VendorItemCode;
wipItem.Version = minnoTemp.Version;
wipItem.MSeq = seqForDeductQty;
wipItem.MCardType = minno.EAttribute1;
wipItem.Eattribute1 = simulation.EAttribute1;
wipItem.ItemCode = simulation.ItemCode;
wipItem.ResCode = simulation.ResCode;
wipItem.RouteCode = simulation.RouteCode;
wipItem.LotCode = simulation.LotCode;
wipItem.LotSeq = simulation.LotSeq;
wipItem.SegmentCode = simulationReport.SegmentCode;
wipItem.BeginShiftCode = simulationReport.BeginShiftCode;
wipItem.ShiftTypeCode = simulationReport.ShiftTypeCode;
wipItem.StepSequenceCode = simulationReport.StepSequenceCode;
wipItem.BeginTimePeriodCode = simulationReport.BeginTimePeriodCode;
wipItem.MOCode = simulation.MOCode;
wipItem.ModelCode = simulation.ModelCode;
wipItem.OPCode = simulation.OPCode;
wipItem.CollectStatus = simulation.CollectStatus;
wipItem.BeginDate = simulation.BeginDate;
wipItem.BeginTime = simulation.BeginTime;
wipItem.MaintainUser = simulation.MaintainUser;
wipItem.TransStatus = TransactionStatus.TransactionStatus_YES;
wipItem.Qty = iOPBOMItemQty;
wipItem.ActionType = (int)MaterialType.CollectMaterial;
wipItem.MOSeq = simulation.MOSeq;
dataCollectFacade.AddLotOnWIPItem(wipItem);
LotSimulationReport simulationRpt = dataCollectFacade.GetLastLotSimulationReport(wipItem.LotCode);
if (simulationRpt != null)
{
dataCollectFacade.UpdateLotSimulationReport(simulationRpt);
}
seqForDeductQty++;
#endregion
iOPBOMItemQty = 0;
lotNoList += ("," + lotInfo.Lotno + ",");
break;
}
}
#endregion
}
//}
return(returnValue);
}
public Messages CKeyPartsCollect(XmlNode node)
{
string action = node.Attributes["action"].Value;
string card = node["code"].InnerText;
string res = node["resource"].InnerText;
string usr = node["user"].InnerText;
string data = node["data"].InnerText;
string[] ss = data.Split(';');
string MOSplitRule = node["MOSplitRule"].InnerText;
Messages productmessages = new Messages();
try
{
//数据准备
productmessages.AddMessages(dataCollect.GetIDInfo(card));
ProductInfo product;
if (productmessages.IsSuccess())
{
product = (ProductInfo)productmessages.GetData().Values[0];
}
else
{
return(productmessages);
}
#region 先推途程，然后找OPBOM
productmessages.AddMessages(dataCollect.CheckID(new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectKeyParts, card, usr,
res, product, null)));
if (productmessages.IsSuccess())
{
}
else
{
return(productmessages);
}
OPBomKeyparts opBomKeyparts;
try
{
BenQGuru.eMES.Common.Domain.IDomainDataProvider _provider = _provider = BenQGuru.eMES.Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider();
OPBOMFacade opBOMFacade = new OPBOMFacade(_provider);
opBomKeyparts = new OPBomKeyparts(opBOMFacade.GetOPBOMDetails(product.NowSimulation.MOCode,
product.NowSimulation.RouteCode, product.NowSimulation.OPCode), Convert.ToInt32(MOSplitRule), this.DataProvider);
if (opBomKeyparts.Count == 0)
{
productmessages.Add(new Message("$CS_NOOPBomInfo $CS_Param_MOCode=" + product.NowSimulation.MOCode
+ " $CS_Param_RouteCode=" + product.NowSimulation.RouteCode
+ " $CS_Param_OPCode=" + product.NowSimulation.OPCode));
return(productmessages);
}
#endregion
for (int i = 0; i < ss.Length; i++)
{
opBomKeyparts.AddKeyparts(ss[i].ToUpper());
}
}
catch (Exception e)
{
productmessages.Add(new Message(e));
return(productmessages);
}
productmessages.AddMessages(dataCollect.Action(new CKeypartsActionEventArgs(action, card,
usr, res, product, opBomKeyparts)));
//检查数据
if (productmessages.IsSuccess())
{
DataCollectFacade df = new DataCollectFacade();
Simulation s2 = (Simulation)df.GetSimulation(card);
if (s2 == null)
{
productmessages.Add(new Message(MessageType.Error,
"天拉"));
return(productmessages);
}
}
else
{
return(productmessages);
}
return(productmessages);
}
catch (Exception e)
{
productmessages.Add(new Message(e));
return(productmessages);
}
}
protected void cmdSave_ServerClick(object sender, System.EventArgs e)
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
object opBOMDetail = this.GetEditObject();
if (opBOMDetail != null)
{
DataProvider.BeginTransaction();
try
{
OPBOMDetail opBOPDTL = opBOMDetail as OPBOMDetail;
//this._opBOMFacade.UpdateOPBOMItem( opBOPDTL );
this._opBOMFacade.DeleteOPBOMItem(opBOPDTL);
this._opBOMFacade.AddOPBOMItem(opBOPDTL);
//Laws Lu,2006/09/01
/*1,目前工序BOM建立逻辑不变，增加生效检查功能和失效功能，
* 初始建立的工序BOM资料处于失效状态,通过生效检查后处于生效状态，
* 此时不允许修改，只有失效状态的工序BOM才可以修改。
* 生效检查逻辑包括：完整的工序BOM包含的子阶物料（替代料）必须包含某工单所有的已发料物料代码，
* 比如，工单发料资料中包含5种物料，则工序BOM中的子阶物料必须也有这五种物料，
* 且首选料不能有这五种物料之外的其他物料。具体的工单由用户在界面指定。
* 举例如下：工单发料资料中有A,B,C,D四种物料*/
//Laws Lu,2006/12/15 取消默认为失效的设置
MOFacade moFac = (new FacadeFactory(DataProvider)).CreateMOFacade();
object objOPBOM = moFac.GetOPBOM(opBOPDTL.ItemCode, opBOPDTL.OPBOMCode, opBOPDTL.OPBOMVersion, GlobalVariables.CurrentOrganizations.First().OrganizationID);
//
if (objOPBOM != null)
{
OPBOM opBOM = objOPBOM as OPBOM;
opBOM.Avialable = 1;
moFac.UpdateOPBOM(opBOM);
}
DataProvider.CommitTransaction();
}
catch (Exception ex)
{
Log.Error(ex.Message);
DataProvider.RollbackTransaction();
throw ex;
}
finally
{
((SQLDomainDataProvider)DataProvider).PersistBroker.CloseConnection();
}
this.RequestData();
this.buttonHelper.PageActionStatusHandle(PageActionType.Save);
}
SetcbSourceSBOMEdit(true);
}
protected void cmdAdd_ServerClick(object sender, System.EventArgs e)
{
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
if (_itemFacade == null)
{
_itemFacade = new FacadeFactory(base.DataProvider).CreateItemFacade();
}
ArrayList array = this.GetNoRepeatSelectObjs(this.gridHelper.GetCheckedRows());
if (array.Count > 0)
{
ArrayList sboms = new ArrayList();
Hashtable notInOPBOMHT = this.GetNotInOPBOMHashtalbe();
string returnMsg = string.Empty;
foreach (GridRecord row in array)
{
object obj = this.GetEditObject(row);
if (obj != null)
{
if (notInOPBOMHT.Contains(((SBOM)obj).SBOMItemCode))//只有不在opbom中的子阶料才可以添加到列表中
{
sboms.Add((SBOM)obj);
}
}
}
if (sboms.Count > 0)
{
ItemRoute2OP itemRoute2Operation = (ItemRoute2OP)_itemFacade.GetItemRoute2Op(OPID, GlobalVariables.CurrentOrganizations.First().OrganizationID);
_opBOMFacade.AssignBOMItemToOperation(OPBOMCode, OPBOMVersion, itemRoute2Operation, (SBOM[])sboms.ToArray(typeof(SBOM)), this.Actiontype);
//Laws Lu,2006/09/01
/*1,目前工序BOM建立逻辑不变，增加生效检查功能和失效功能，
* 初始建立的工序BOM资料处于失效状态,通过生效检查后处于生效状态，
* 此时不允许修改，只有失效状态的工序BOM才可以修改。
* 生效检查逻辑包括：完整的工序BOM包含的子阶物料（替代料）必须包含某工单所有的已发料物料代码，
* 比如，工单发料资料中包含5种物料，则工序BOM中的子阶物料必须也有这五种物料，
* 且首选料不能有这五种物料之外的其他物料。具体的工单由用户在界面指定。
* 举例如下：工单发料资料中有A,B,C,D四种物料*/
DataProvider.BeginTransaction();
try
{
MOFacade moFac = (new FacadeFactory(DataProvider)).CreateMOFacade();
object objOPBOM = moFac.GetOPBOM(itemRoute2Operation.ItemCode, OPBOMCode, OPBOMVersion, GlobalVariables.CurrentOrganizations.First().OrganizationID);
if (objOPBOM != null)
{
OPBOM opBOM = objOPBOM as OPBOM;
opBOM.Avialable = 0;
moFac.UpdateOPBOM(opBOM);
}
// Added by Icyer 2005/08/16
// 同时将物料加入到物料主档中
BenQGuru.eMES.Material.WarehouseFacade wf = new BenQGuru.eMES.Material.WarehouseFacade(base.DataProvider);
wf.AddWarehouseItem((SBOM[])sboms.ToArray(typeof(SBOM)));
DataProvider.CommitTransaction();
//this.cmdReturn_ServerClick(sender,e);
// Added end
}
catch (Exception ex)
{
Log.Error(ex.Message);
DataProvider.RollbackTransaction();
throw ex;
}
finally
{
((SQLDomainDataProvider)DataProvider).PersistBroker.CloseConnection();
}
foreach (SBOM somobject in (SBOM[])sboms.ToArray(typeof(SBOM)))
{
ItemFacade itemFacade = new ItemFacade(this.DataProvider);
Domain.MOModel.Material MaterialObject = (Domain.MOModel.Material)itemFacade.GetMaterial(somobject.SBOMItemCode.Trim().ToUpper(), GlobalVariables.CurrentOrganizations.First().OrganizationID);
if (MaterialObject != null)
{
if (MaterialObject.MaterialCheckType.IndexOf(OPBOMDetailCheckType.CHECK_LINKBARCODE) < 0)
{
returnMsg += "$ITEM_NOT_LINKBARCODE:" + somobject.SBOMItemCode.Trim().ToUpper() + "\n ";
}
}
}
}
//if (addItemMessage.Trim()!=string.Empty && addItemMessage.Trim().Length>0)
//{
// WebInfoPublish.Publish(this, addItemMessage, this.languageComponent1);
//}
this.RequestData();
this.Return(sender, e, returnMsg);
}
}
// Added by Icyer 2006/12/15
// 检查产品
private Messages CheckProduct(object act, string runningCard)
{
// 查询产品信息
BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null;
if ((act as IDCTClient).DBConnection != null)
{
domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
}
else
{
domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider()
as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
(act as IDCTClient).DBConnection = domainProvider;
}
ActionOnLineHelper _helper = new ActionOnLineHelper(domainProvider);
UserControl.Messages msgProduct = _helper.GetIDInfo(runningCard);
ProductInfo product = (ProductInfo)msgProduct.GetData().Values[0];
if (product == null || product.LastSimulation == null)
{
msgProduct.ClearMessages();
msgProduct.Add(new UserControl.Message(MessageType.Error, "$NoSimulation"));
return(msgProduct);
}
mergeList = new Hashtable();
mergeList.Add("ProdcutInfo", msgProduct);
// 转换比例
//this.IDMergeRule = Convert.ToInt32(product.LastSimulation.IDMergeRule); // 转换比例从工序中读
IDCTClient client = act as IDCTClient;
OPBOMFacade opBOMFacade = new OPBOMFacade(domainProvider);
// 检查途程
Messages messages1 = _helper.CheckID(
new CKeypartsActionEventArgs(
ActionType.DataCollectAction_Split,
product.LastSimulation.RunningCard,
client.LoginedUser,
client.ResourceCode,
product,
null,
null));
if (messages1.IsSuccess() == true)
{
object op = new ItemFacade(domainProvider).GetItemRoute2Operation(
product.NowSimulation.ItemCode,
product.NowSimulation.RouteCode,
product.NowSimulation.OPCode);
if (op == null)
{
messages1.Add(new UserControl.Message(MessageType.Error, "$Error_CS_Current_OP_Not_Exist"));
return(messages1);
}
if (((ItemRoute2OP)op).OPControl[(int)BenQGuru.eMES.BaseSetting.OperationList.IDTranslation] != '1')
{
messages1.Add(new UserControl.Message(MessageType.Error, "$CS_OP_Not_SplitOP")); //当前工序不是序号转换工序
return(messages1);
}
// 转换比例
this.IDMergeRule = 1;
if (((ItemRoute2OP)op).IDMergeType == IDMergeType.IDMERGETYPE_ROUTER)
{
this.IDMergeRule = (int)((ItemRoute2OP)op).IDMergeRule;
}
// 序号转换类型
mergeIdType = ((ItemRoute2OP)op).IDMergeType;
ArrayList listId = new ArrayList();
mergeList.Add("MergeIdList", listId);
}
else
{
return(messages1);
}
return(msgProduct);
}
private object GetEditObject()
{
if (this.ValidateInput())
{
if (_itemFacade == null)
{
_itemFacade = new FacadeFactory(base.DataProvider).CreateItemFacade();
}
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
OPBOMDetail opBOMDetail = this._opBOMFacade.CreateNewOPBOMDetail();
opBOMDetail.OPBOMItemSeq = int.Parse(this.TextboxOPBOMItemSeqEdit.Text);
opBOMDetail.IsItemCheck = OPBOMFacade.OPBOMISItemCheckValue_DEFAULT;
opBOMDetail.ItemCheckValue = OPBOMFacade.OPBOMItemCheckValue_DEFAULT;
opBOMDetail.ItemCode = ItemCode;
opBOMDetail.MaintainUser = this.GetUserCode();
opBOMDetail.OPBOMCode = OPBOMCode;
opBOMDetail.OPBOMItemCode = FormatHelper.PKCapitalFormat(FormatHelper.CleanString(this.txtItemCodeEdit.Text));
opBOMDetail.OPBOMItemControlType = FormatHelper.CleanString(this.drpItemControlTypeEdit.SelectedValue);
opBOMDetail.OPBOMItemName = FormatHelper.CleanString(this.txtBOMItemNameEdit.Text);
opBOMDetail.OPBOMItemQty = System.Decimal.Parse(this.txtItemQtyEdit.Text);
opBOMDetail.OPBOMItemType = OPBOMFacade.OPBOMITEMTYPE_DEFAULT;
opBOMDetail.OPBOMItemUOM = FormatHelper.CleanString(this.txtBOMItemUOMEdit.Text);
opBOMDetail.OPBOMSourceItemCode = FormatHelper.PKCapitalFormat(FormatHelper.CleanString(this.txtSourceItemCodeEdit.Text));
ItemRoute2OP itemRoute2OP = (ItemRoute2OP)_itemFacade.GetItemRoute2Op(OPID, GlobalVariables.CurrentOrganizations.First().OrganizationID);
opBOMDetail.OPID = OPID;
opBOMDetail.OPBOMVersion = this.DropdownlistSBOMVersionQuery.SelectedValue;
opBOMDetail.OPCode = itemRoute2OP.OPCode;
opBOMDetail.OPBOMItemEffectiveDate = 20051231;
opBOMDetail.OPBOMItemEffectiveTime = 0;
opBOMDetail.OPBOMItemInvalidDate = 21001231;
opBOMDetail.OPBOMItemInvalidTime = 0;
opBOMDetail.OPBOMItemVersion = this.DropdownlistSBOMVersionQuery.SelectedValue;
opBOMDetail.ActionType = this.Actiontype;
opBOMDetail.OrganizationID = GlobalVariables.CurrentOrganizations.First().OrganizationID;
if (chkValid.Checked)
{
opBOMDetail.OPBOMValid = int.Parse(BenQGuru.eMES.Web.Helper.FormatHelper.TRUE_STRING);
}
else
{
opBOMDetail.OPBOMValid = int.Parse(BenQGuru.eMES.Web.Helper.FormatHelper.FALSE_STRING);
}
//Parse Type
opBOMDetail.OPBOMParseType = string.Empty;
if (chkParseBarcode.Checked)
{
opBOMDetail.OPBOMParseType += "," + OPBOMDetailParseType.PARSE_BARCODE;
}
if (chkParsePrepare.Checked)
{
opBOMDetail.OPBOMParseType += "," + OPBOMDetailParseType.PARSE_PREPARE;
}
if (chkParseProduct.Checked)
{
opBOMDetail.OPBOMParseType += "," + OPBOMDetailParseType.PARSE_PRODUCT;
}
if (opBOMDetail.OPBOMParseType.Length > 0)
{
opBOMDetail.OPBOMParseType = opBOMDetail.OPBOMParseType.Substring(1);
}
else
{
opBOMDetail.OPBOMParseType = " ";
}
if (chkParseProduct.Checked && this.chkCheckStatus.Checked)
{
opBOMDetail.CheckStatus = BenQGuru.eMES.Web.Helper.FormatHelper.TRUE_STRING;
}
else
{
opBOMDetail.CheckStatus = BenQGuru.eMES.Web.Helper.FormatHelper.FALSE_STRING;
}
//Check Type
opBOMDetail.OPBOMCheckType = string.Empty;
if (chkLinkBarcode.Checked)
{
opBOMDetail.OPBOMCheckType += "," + OPBOMDetailCheckType.CHECK_LINKBARCODE;
}
if (chkCompareItem.Checked)
{
opBOMDetail.OPBOMCheckType += "," + OPBOMDetailCheckType.CHECK_COMPAREITEM;
}
if (opBOMDetail.OPBOMCheckType.Length > 0)
{
opBOMDetail.OPBOMCheckType = opBOMDetail.OPBOMCheckType.Substring(1);
}
else
{
opBOMDetail.OPBOMCheckType = " ";
}
if (chkSNLength.Checked)
{
int snLength = int.Parse(this.txtSNLength.Text);
opBOMDetail.SerialNoLength = snLength;
}
else
{
opBOMDetail.SerialNoLength = 0;
}
if (this.chkNeedVendor.Checked)
{
opBOMDetail.NeedVendor = NeedVendor.NeedVendor_Y;
}
else
{
opBOMDetail.NeedVendor = NeedVendor.NeedVendor_N;
}
return(opBOMDetail);
}
else
{
return(null);
}
}
//private void gridWebGrid_DblClick(object sender, Infragistics.WebUI.UltraWebGrid.ClickEventArgs e)
//{
// object obj = this.GetEditObject(e.Row);
// if (obj != null)
// {
// this.SetEditObject(obj);
// this.buttonHelper.PageActionStatusHandle(PageActionType.Update);
// }
//}
protected void cmdAdd_ServerClick(object sender, System.EventArgs e)
{
if (chbSourceSBOMEdit.Checked)
{
Response.Redirect(this.MakeRedirectUrl("FOPBOMOperationItemSP.aspx",
new string[] { "itemcode", "opbomcode", "opbomversion", "routecode", "opid", "actiontype", "OrgID" },
new string[] { ItemCode, OPBOMCode, OPBOMVersion, RouteCode, OPID, this.Actiontype.ToString(), OrgID.ToString() }));
}
else
{
object opBOMDetail = this.GetEditObject();
if (opBOMDetail != null)
{
if (_itemFacade == null)
{
_itemFacade = new FacadeFactory(base.DataProvider).CreateItemFacade();
}
if (_itemFacade.GetMaterial(((OPBOMDetail)opBOMDetail).OPBOMItemCode, ((OPBOMDetail)opBOMDetail).OrganizationID) == null)
{
ExceptionManager.Raise(this.GetType().BaseType, "$Error_Material_NotFound", lblBOMItemCodeEdit.Text + ": " + ((OPBOMDetail)opBOMDetail).OPBOMItemCode);
}
if (_itemFacade.GetMaterial(((OPBOMDetail)opBOMDetail).OPBOMSourceItemCode, ((OPBOMDetail)opBOMDetail).OrganizationID) == null)
{
ExceptionManager.Raise(this.GetType().BaseType, "$Error_Material_NotFound", lblSourceItemCode.Text + ": " + ((OPBOMDetail)opBOMDetail).OPBOMSourceItemCode);
}
if (_opBOMFacade == null)
{
_opBOMFacade = new FacadeFactory(base.DataProvider).CreateOPBOMFacade();
}
DataProvider.BeginTransaction();
try
{
OPBOMDetail opBOPDTL = opBOMDetail as OPBOMDetail;
this._opBOMFacade.AddOPBOMItem(opBOPDTL);
//Laws Lu,2006/09/01
/*1,目前工序BOM建立逻辑不变，增加生效检查功能和失效功能，
* 初始建立的工序BOM资料处于失效状态,通过生效检查后处于生效状态，
* 此时不允许修改，只有失效状态的工序BOM才可以修改。
* 生效检查逻辑包括：完整的工序BOM包含的子阶物料（替代料）必须包含某工单所有的已发料物料代码，
* 比如，工单发料资料中包含5种物料，则工序BOM中的子阶物料必须也有这五种物料，
* 且首选料不能有这五种物料之外的其他物料。具体的工单由用户在界面指定。
* 举例如下：工单发料资料中有A,B,C,D四种物料*/
//Laws Lu,2006/12/15 取消默认为失效状态
MOFacade moFac = (new FacadeFactory(DataProvider)).CreateMOFacade();
object objOPBOM = moFac.GetOPBOM(opBOPDTL.ItemCode, opBOPDTL.OPBOMCode, opBOPDTL.OPBOMVersion, GlobalVariables.CurrentOrganizations.First().OrganizationID);
//
if (objOPBOM != null)
{
OPBOM opBOM = objOPBOM as OPBOM;
opBOM.Avialable = 1;
moFac.UpdateOPBOM(opBOM);
}
// Added by Icyer 2005/08/16
// 同时将物料加入到物料主档中
BenQGuru.eMES.Material.WarehouseFacade wf = new BenQGuru.eMES.Material.WarehouseFacade(base.DataProvider);
wf.AddWarehouseItem((OPBOMDetail)opBOMDetail);
DataProvider.CommitTransaction();
// Added end
}
catch (Exception ex)
{
Log.Error(ex.Message);
DataProvider.RollbackTransaction();
throw ex;
}
finally
{
((SQLDomainDataProvider)DataProvider).PersistBroker.CloseConnection();
}
this.gridHelper.GridBind(this.pagerToolBar.PageIndex, this.pagerToolBar.PageSize);
this.pagerToolBar.RowCount = GetRowCount();
this.buttonHelper.PageActionStatusHandle(PageActionType.Add);
}
}
SetcbSourceSBOMEdit(true);
}
// Added by Icyer 2006/12/15
// 检查产品
private Messages CheckProduct(object act, string runningCard)
{
// 查询产品信息
BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null;
if ((act as IDCTClient).DBConnection != null)
{
domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
}
else
{
domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider()
as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
(act as IDCTClient).DBConnection = domainProvider;
}
try
{
//为改善性能
((SQLDomainDataProvider)domainProvider).PersistBroker.AutoCloseConnection = false;
((SQLDomainDataProvider)domainProvider).PersistBroker.OpenConnection();
ActionOnLineHelper _helper = new ActionOnLineHelper(domainProvider);
// Added by Icyer 2007/03/16 如果归属工单，则做归属工单检查，否则做序列号途程检查
UserControl.Messages msgProduct = _helper.GetIDInfo(runningCard);
ProductInfo product = (ProductInfo)msgProduct.GetData().Values[0];
MO moWillGo = null;
ActionGoToMO actionGoMO = new ActionGoToMO(domainProvider);
Messages msgMo = actionGoMO.GetItemCodeFromGoMoRCard(((IDCTClient)act).ResourceCode, runningCard);
if (msgMo.IsSuccess() == false) // 如果有错误，表示需要归属工单，但是解析工单或查询工单发生错误
{
return(msgMo);
}
if (msgMo.GetData() != null) // 需要归属工单，做归属工单检查
{
product.NowSimulation = new BenQGuru.eMES.Domain.DataCollect.Simulation();
UserControl.Message msgMoData = msgMo.GetData();
moWillGo = (MO)msgMoData.Values[0];
moCode = moWillGo.MOCode;
ActionGoToMO goToMO = new ActionGoToMO(domainProvider);
GoToMOActionEventArgs MOActionEventArgs = new GoToMOActionEventArgs(
ActionType.DataCollectAction_GoMO,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product,
moWillGo.MOCode);
msgMo = goToMO.CheckIn(MOActionEventArgs);
if (!MOActionEventArgs.PassCheck)
{
msgMo = _helper.CheckID(new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectINNO,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product, null, null));
}
}
else // 不需要归属工单，检查序列号途程
{
if (product == null || product.LastSimulation == null)
{
msgProduct.ClearMessages();
msgProduct.Add(new UserControl.Message(MessageType.Error, "$NoSimulation"));
return(msgProduct);
}
msgMo = _helper.CheckID(new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectINNO,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product, null, null));
}
if (msgMo.IsSuccess() == false)
{
return(msgMo);
}
// Added end
keypartsHT = new Hashtable();
keypartsHT.Add("ProdcutInfo", product);
keypartsHT.Add("MOWillGo", moWillGo);
IDCTClient client = act as IDCTClient;
OPBOMFacade opBOMFacade = new OPBOMFacade(domainProvider);
MOFacade moFacade = new MOFacade(domainProvider);
object[] objBomDetail = null;
Messages messages1 = new Messages();
if (moWillGo == null)
{
// 检查途程
messages1 = _helper.CheckID(
new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectINNO,
product.LastSimulation.RunningCard,
client.LoginedUser,
client.ResourceCode,
product,
null,
null));
}
if (messages1.IsSuccess() == true)
{
//objBomDetail = opBOMFacade.GetOPBOMDetails(
// product.NowSimulation.MOCode,
// product.NowSimulation.RouteCode,
// product.NowSimulation.OPCode);
//Miodified by Scott
MO moNew = (MO)moFacade.GetMO(product.NowSimulation.MOCode);
objBomDetail = opBOMFacade.QueryOPBOMDetail(product.NowSimulation.ItemCode, string.Empty, string.Empty, moNew.BOMVersion,
product.NowSimulation.RouteCode, product.NowSimulation.OPCode, (int)MaterialType.CollectMaterial,
int.MinValue, int.MaxValue, moNew.OrganizationID, true);
if (objBomDetail == null)
{
messages1.Add(new UserControl.Message(MessageType.Error, "$CS_OPBOM_NotFound"));
}
}
else
{
return(messages1);
}
//object mo = moFacade.GetMO( product.LastSimulation.MOCode );
object mo = moWillGo;
if (moWillGo == null)
{
mo = moFacade.GetMO(product.LastSimulation.MOCode);
}
//OPBomKeyparts opBomKeyparts = new OPBomKeyparts(objBomDetail, Convert.ToInt32(((MO)mo).IDMergeRule), domainProvider);
// 查询OPBOM
if (objBomDetail == null)
{
msgProduct.Add(new Message(MessageType.Error, "$CS_NOOPBomInfo $CS_Param_MOCode=" + product.NowSimulation.MOCode
+ " $CS_Param_RouteCode=" + product.NowSimulation.RouteCode
+ " $CS_Param_OPCode =" + product.NowSimulation.OPCode));
return(msgProduct);
}
else
{
this.filterOpBomDetail(ref objBomDetail);
if (objBomDetail == null || objBomDetail.Length <= 0)
{
msgProduct.Add(new Message(MessageType.Error, "$CS_OPBOM_NotFound"));
return(msgProduct);
}
for (int i = 0; i < objBomDetail.Length; i++)
{
if (((OPBOMDetail)objBomDetail[i]).OPBOMItemControlType == "item_control_lot")
{
opBomDetailCount += 1;
}
else
{
opBomDetailCount += Convert.ToInt32(((OPBOMDetail)objBomDetail[i]).OPBOMItemQty);
}
}
for (int i = 0; i < objBomDetail.Length; i++)
{
if (((OPBOMDetail)objBomDetail[i]).OPBOMItemControlType == "item_control_lot")
{
opBomDetailList.Add(objBomDetail[i]);
}
else
{
int number = Convert.ToInt32(((OPBOMDetail)objBomDetail[i]).OPBOMItemQty);
for (int j = 0; j < number; j++)
{
opBomDetailList.Add(objBomDetail[i]);
}
}
}
if (((OPBOMDetail)objBomDetail[0]).OPBOMItemControlType == BOMItemControlType.ITEM_CONTROL_LOT)
{
msgProduct.Add(new UserControl.Message(MessageType.Normal, ">>$DCT_PLEASE_INPUT_Lot " + ((OPBOMDetail)objBomDetail[0]).OPBOMSourceItemCode));
}
else
{
msgProduct.Add(new UserControl.Message(MessageType.Normal, ">>$DCT_PLEASE_INPUT_Keyparts " + ((OPBOMDetail)objBomDetail[0]).OPBOMSourceItemCode));
}
// keypartsHT.Add("KeypartsInfo", opBomKeyparts);
keypartsHT.Add("Opbomdetail", objBomDetail);
}
return(msgProduct);
}
catch (Exception ex)
{
throw ex;
}
finally
{
((SQLDomainDataProvider)domainProvider).PersistBroker.CloseConnection();
((SQLDomainDataProvider)domainProvider).PersistBroker.AutoCloseConnection = true;
}
}
// Added by Icyer 2006/12/15
// 检查产品
private Messages CheckProduct(object act, string runningCard)
{
// 查询产品信息
BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null;
if ((act as IDCTClient).DBConnection != null)
{
domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
}
else
{
domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider()
as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
(act as IDCTClient).DBConnection = domainProvider;
}
ActionOnLineHelper _helper = new ActionOnLineHelper(domainProvider);
/* Removed by Icyer 2007/03/16
* UserControl.Messages msgProduct = _helper.GetIDInfo( runningCard ) ;
* ProductInfo product= (ProductInfo)msgProduct.GetData().Values[0];
* if (product == null || product.LastSimulation == null)
* {
* msgProduct.ClearMessages();
* msgProduct.Add(new UserControl.Message(MessageType.Error, "$NoSimulation"));
* return msgProduct;
* }
*/
// Added by Icyer 2007/03/16 如果归属工单，则做归属工单检查，否则做序列号途程检查
UserControl.Messages msgProduct = _helper.GetIDInfo(runningCard);
ProductInfo product = (ProductInfo)msgProduct.GetData().Values[0];
MO moWillGo = null;
ActionGoToMO actionGoMO = new ActionGoToMO(domainProvider);
Messages msgMo = actionGoMO.GetItemCodeFromGoMoRCard(((IDCTClient)act).ResourceCode, runningCard);
if (msgMo.IsSuccess() == false) // 如果有错误，表示需要归属工单，但是解析工单或查询工单发生错误
{
return(msgMo);
}
if (msgMo.GetData() != null) // 需要归属工单，做归属工单检查
{
product.NowSimulation = new BenQGuru.eMES.Domain.DataCollect.Simulation();
UserControl.Message msgMoData = msgMo.GetData();
moWillGo = (MO)msgMoData.Values[0];
ActionGoToMO goToMO = new ActionGoToMO(domainProvider);
GoToMOActionEventArgs MOActionEventArgs = new GoToMOActionEventArgs(
ActionType.DataCollectAction_GoMO,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product,
moWillGo.MOCode);
msgMo = goToMO.CheckIn(MOActionEventArgs);
if (!MOActionEventArgs.PassCheck)
{
msgMo = _helper.CheckID(new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectKeyParts,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product, null, null));
}
}
else // 不需要归属工单，检查序列号途程
{
if (product == null || product.LastSimulation == null)
{
msgProduct.ClearMessages();
msgProduct.Add(new UserControl.Message(MessageType.Error, "$NoSimulation"));
return(msgProduct);
}
msgMo = _helper.CheckID(new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectKeyParts,
runningCard,
((IDCTClient)act).LoginedUser,
((IDCTClient)act).ResourceCode,
product, null, null));
}
if (msgMo.IsSuccess() == false)
{
return(msgMo);
}
// Added end
keypartsHT = new Hashtable();
keypartsHT.Add("ProdcutInfo", msgProduct);
keypartsHT.Add("MOWillGo", moWillGo);
IDCTClient client = act as IDCTClient;
OPBOMFacade opBOMFacade = new OPBOMFacade(domainProvider);
object[] objBomDetail = null;
Messages messages1 = new Messages();
if (moWillGo == null)
{
// 检查途程
messages1 = _helper.CheckID(
new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectKeyParts,
product.LastSimulation.RunningCard,
client.LoginedUser,
client.ResourceCode,
product,
null,
null));
}
if (messages1.IsSuccess() == true)
{
objBomDetail = opBOMFacade.GetOPBOMDetails(
product.NowSimulation.MOCode,
product.NowSimulation.RouteCode,
product.NowSimulation.OPCode);
}
else
{
return(messages1);
}
MOFacade moFacade = new MOFacade(domainProvider);
//object mo = moFacade.GetMO( product.LastSimulation.MOCode );
object mo = moWillGo;
if (moWillGo == null)
{
mo = moFacade.GetMO(product.LastSimulation.MOCode);
}
// 查询OPBOM
OPBomKeyparts opBomKeyparts = new OPBomKeyparts(objBomDetail, Convert.ToInt32(((MO)mo).IDMergeRule), domainProvider);
if (opBomKeyparts.Count == 0)
{
msgProduct.Add(new Message(MessageType.Error, "$CS_NOOPBomInfo $CS_Param_MOCode=" + product.NowSimulation.MOCode
+ " $CS_Param_RouteCode=" + product.NowSimulation.RouteCode
+ " $CS_Param_OPCode =" + product.NowSimulation.OPCode));
return(msgProduct);
}
else
{
this.OutMesssage = new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts " + (opBomKeyparts.GetbomKeypartCount() + 1).ToString() + "/" + opBomKeyparts.Count.ToString());
keypartsHT.Add("KeypartsInfo", opBomKeyparts);
}
return(msgProduct);
}
// Added end
public override Messages Action(object act)
{
Messages msg = new Messages();
ActionOnLineHelper _helper = null;
BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null;
if (act == null)
{
return(msg);
}
DataCollect.Action.ActionEventArgs args;
if (ObjectState == null)
{
args = new BenQGuru.eMES.DataCollect.Action.ActionEventArgs();
args.RunningCard = act.ToString().ToUpper().Trim();
}
else
{
args = ObjectState as DataCollect.Action.ActionEventArgs;
}
string data = act.ToString().ToUpper().Trim(); //Keyparts
//Laws Lu,2006/06/03 添加 获取已有连接
if ((act as IDCTClient).DBConnection != null)
{
domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
}
else
{
domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider()
as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
(act as IDCTClient).DBConnection = domainProvider;
}
msg = CheckData(data, domainProvider);
if (keypartsHT == null)
{
// 按照逻辑，走到这个分支应该是错误的
string strFile = @"C:\DCT_EmptyMessage.txt";
string strLine = DateTime.Now.ToString("yyyy-MM-dd HH:mi:ss") + "\t" + "ActionCollectKeyParts" + "\t" + "Missing Product In Action, RunningCard:" + args.RunningCard + ",Input:" + data;
System.IO.StreamWriter writer = new System.IO.StreamWriter(strFile, true);
writer.WriteLine(strLine);
writer.Close();
//
if (msg.IsSuccess() &&
(keypartsHT == null || keypartsHT.ContainsKey("ProdcutInfo") == false))
{
//检查序列号
_helper = new ActionOnLineHelper(domainProvider);
msg = _helper.GetIDInfo(args.RunningCard);
// Added by Icyer 2006/12/14
// 检查序列号
ProductInfo product = (ProductInfo)msg.GetData().Values[0];
if (product == null || product.LastSimulation == null)
{
msg.ClearMessages();
msg.Add(new Message(MessageType.Error, "$NoSimulation"));
}
// base.Action (act);
// ActionCollectKeyparts actionCollectKeyparts = this;
// this.NextAction = actionCollectKeyparts;
// this.Status = ActionStatus.PrepareData;
// return msg;
// Added end
}
if (msg.IsSuccess() &&
(keypartsHT == null || keypartsHT.ContainsKey("KeypartsInfo") == false))
{
try
{
keypartsHT = new Hashtable();
keypartsHT.Add("ProdcutInfo", msg);
ProductInfo product = (ProductInfo)msg.GetData().Values[0];
/* Removed by Icyer 2006/12/14
* 如果序列号已在本上料工序，则GetMORouteNextOperation会取下一个工序，导致找不到OPBOM
* 改变推导OPBOM的逻辑
* ItemFacade itemFacade = new ItemFacade(domainProvider);
* object op = itemFacade.GetMORouteNextOperation(
* product.LastSimulation.MOCode,
* product.LastSimulation.RouteCode,
* product.LastSimulation.OPCode);
*
* OPBOMFacade opBOMFacade=new OPBOMFacade( domainProvider);
* object[] objBomDetail = opBOMFacade.GetOPBOMDetails(
* product.LastSimulation.MOCode,
* product.LastSimulation.RouteCode,
* (op as ItemRoute2OP).OPCode);
*/
// Added by Icyer 2006/12/14
IDCTClient client = act as IDCTClient;
OPBOMFacade opBOMFacade = new OPBOMFacade(domainProvider);
object[] objBomDetail = null;
DataCollect.ActionOnLineHelper onLine = new ActionOnLineHelper(domainProvider);
Messages messages1 = onLine.CheckID(
new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectKeyParts,
product.LastSimulation.RunningCard,
client.LoginedUser,
client.ResourceCode,
product,
null,
null));
if (messages1.IsSuccess() == true)
{
objBomDetail = opBOMFacade.GetOPBOMDetails(
product.NowSimulation.MOCode,
product.NowSimulation.RouteCode,
product.NowSimulation.OPCode);
}
else
{
throw new Exception(messages1.OutPut());
}
// Added end
MOFacade moFacade = new MOFacade(domainProvider);
object mo = moFacade.GetMO(product.LastSimulation.MOCode);
OPBomKeyparts opBomKeyparts = new OPBomKeyparts(objBomDetail, Convert.ToInt32(((MO)mo).IDMergeRule), domainProvider);
if (opBomKeyparts.Count == 0)
{
/* Removed by Icyer 2006/12/27 @ YHI
* msg.Add(new Message(MessageType.Error, "$CS_NOOPBomInfo $CS_Param_MOCode="+product.LastSimulation.MOCode
+" $CS_Param_RouteCode="+product.LastSimulation.RouteCode
+" $CS_Param_OPCode ="+product.LastSimulation.OPCode));
* throw new Exception(msg.OutPut());
*/
throw new Exception("$CS_NOOPBomInfo");
}
else
{
//opBomKeyparts.AddKeyparts(data, product.LastSimulation.MOCode); // Removed by Icyer 2006/12/14
keypartsHT.Add("KeypartsInfo", opBomKeyparts);
}
}
catch (Exception ex)
{
/* Removed by Icyer 2006/12/27 @ YHI
* keypartsHT = null;
* this.NeedCancel = true;
* throw ex;
*/
// Added by Icyer 2006/12/27 @ YHI
base.Action(act);
ActionCollectKeyparts actionCollectKeyparts = this;
this.NextAction = actionCollectKeyparts;
this.Status = ActionStatus.PrepareData;
msg.ClearMessages();
msg.Add(new UserControl.Message(MessageType.Error, ex.Message));
msg.Add(new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts"));
return(msg);
// Added end
}
}
}
if (msg.IsSuccess())
{
OPBomKeyparts opBomKeyparts = (OPBomKeyparts)keypartsHT["KeypartsInfo"];
msg = keypartsHT["ProdcutInfo"] as Messages;
MO moWillGo = (MO)keypartsHT["MOWillGo"];
ProductInfo product = (ProductInfo)msg.GetData().Values[0];
Messages msgResult = new Messages();
if (opBomKeyparts.Count > opBomKeyparts.GetbomKeypartCount())
{
try
{
//opBomKeyparts.AddKeyparts(data, product.LastSimulation.MOCode);
if (moWillGo == null)
{
msgResult.AddMessages(opBomKeyparts.AddKeyparts(data, product.LastSimulation.MOCode));
}
else
{
msgResult.AddMessages(opBomKeyparts.AddKeyparts(data, moWillGo.MOCode));
}
}
catch (Exception ex)
{
msgResult.Add(new UserControl.Message(MessageType.Error, ex.Message));
}
keypartsHT["KeypartsInfo"] = opBomKeyparts;
}
if (msgResult.IsSuccess() == false || opBomKeyparts.Count > opBomKeyparts.GetbomKeypartCount())
{
base.Action(act);
ActionCollectKeyparts actionCollectKeyparts = this;
this.NextAction = actionCollectKeyparts;
this.Status = ActionStatus.PrepareData;
this.OutMesssage = new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts " + (opBomKeyparts.GetbomKeypartCount() + 1).ToString() + "/" + opBomKeyparts.Count.ToString());
if (msgResult.IsSuccess() == false)
{
//msgResult.Add(new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts"));
return(msgResult);
}
else
{
return(msg);
}
}
//((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)domainProvider).PersistBroker.OpenConnection();
domainProvider.BeginTransaction();
try
{
BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(domainProvider);
Resource resource = (Resource)dataModel.GetResource(args.ResourceCode);
_helper = new ActionOnLineHelper(domainProvider);
DataCollectFacade dataCollect = new DataCollect.DataCollectFacade(domainProvider);
ActionCheckStatus actionCheckStatus = new ActionCheckStatus();
actionCheckStatus.ProductInfo = product;
actionCheckStatus.ProductInfo.Resource = resource;
ExtendSimulation lastSimulation = actionCheckStatus.ProductInfo.LastSimulation;
BenQGuru.eMES.Material.WarehouseFacade wfacade = null;
if (System.Configuration.ConfigurationSettings.AppSettings["NeedMaterialModule"].Trim() == "1")
{
wfacade = new WarehouseFacade(domainProvider);
}
IDCTClient client = act as IDCTClient;
msg.AddMessages(_helper.ActionWithTransaction(
new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectKeyParts,
product.NowSimulation.RunningCard,
client.LoginedUser,
client.ResourceCode,
product,
opBomKeyparts,
wfacade), actionCheckStatus));
// Added by Icyer 2006/12/28 @ YHI 采集集成上料
bool bLoadedINNO = false;
if (this.NeedCollectINNO == true && msg.IsSuccess() == true)
{
string strRCard = product.NowSimulation.RunningCard;
UserControl.Messages msgProduct = _helper.GetIDInfo(strRCard);
product = (ProductInfo)msgProduct.GetData().Values[0];
CINNOActionEventArgs argsInno = new CINNOActionEventArgs(
ActionType.DataCollectAction_CollectINNO,
strRCard,
client.LoginedUser,
client.ResourceCode,
product,
INNOCode,
wfacade
);
IAction action = new BenQGuru.eMES.DataCollect.Action.ActionFactory(domainProvider).CreateAction(ActionType.DataCollectAction_CollectINNO);
msg.AddMessages(action.Execute(argsInno));
if (msg.IsSuccess() == true)
{
bLoadedINNO = true;
msg.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_INNO_CollectSuccess[" + this.INNOCode + "] $CS_Keyparts_CollectSuccess")));
}
}
// Added end
if (msg.IsSuccess())
{
if (System.Configuration.ConfigurationSettings.AppSettings["NeedMaterialModule"].Trim() == "1")
{
if (wfacade != null)
{
wfacade.ExecCacheSQL();
}
}
domainProvider.CommitTransaction();
if (bLoadedINNO == false)
{
msg.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_Keyparts_CollectSuccess")));
}
}
else
{
domainProvider.RollbackTransaction();
}
}
catch (Exception ex)
{
domainProvider.RollbackTransaction();
msg.Add(new UserControl.Message(ex));
}
finally
{
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)domainProvider).PersistBroker.CloseConnection();
}
base.Action(act);
ActionRCard actRcard1 = new ActionRCard();
actRcard1.OutMesssage = new UserControl.Message(MessageType.Normal, "$CS_Please_Input_RunningCard");
this.NextAction = actRcard1;
this.ObjectState = null;
this.keypartsHT = null;
this.Status = ActionStatus.PrepareData;
return(msg);
}
base.Action(act);
//Web.Helper.ActionType acttype = new Web.Helper.ActionType();
// if(acttype.Items.Contains(args.RunningCard))
// {
// (act as IDCTClient).CachedAction = null;
// }
ActionRCard actRcard = new ActionRCard();
actRcard.OutMesssage = new UserControl.Message(MessageType.Normal, "$CS_Please_Input_RunningCard");
this.NextAction = actRcard;
// Added by Icyer 2006/12/14
this.ObjectState = null;
this.keypartsHT = null;
this.Status = ActionStatus.PrepareData;
// Added end
return(msg);
}
private Messages LoadData(string rcard)
{
Messages msg = new Messages();
_DataTableLoadedPart.Clear();
MOFacade moFacade = new MOFacade(this.DataProvider);
OPBOMFacade opBOMFacade = new OPBOMFacade(this.DataProvider);
MaterialFacade materialFacade = new MaterialFacade(this.DataProvider);
ItemFacade itemFacade = new ItemFacade(this.DataProvider);
//根据当前的序列号获取产品原始的序列号
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
string sourceRCard = dataCollectFacade.GetSourceCard(rcard, string.Empty);
//Get Product Info
ProductInfo product = GetProduct(sourceRCard);
if (product == null || product.LastSimulation == null)
{
msg.Add(new UserControl.Message(MessageType.Error, "$NoSimulation"));
return(msg);
}
// Marked By HI1/Venus.Feng on 20081013 for Hisense Version : GOOD can do drop
/*
* if (product.LastSimulation.ProductStatus != ProductStatus.NG)
* {
* msg.Add(new UserControl.Message(MessageType.Error, "$DropMaterial_Need_NG"));
* return msg;
* }
*/
// End Marked
//Get loaded parts
OnWIPItem[] onWIPItems = materialFacade.QueryLoadedPartByRCard(product.LastSimulation.RunningCard, string.Empty);
if (onWIPItems == null)
{
msg.Add(new UserControl.Message(MessageType.Error, "$DropMaterial_Need_CINNO"));
return(msg);
}
try
{
if (onWIPItems != null)
{
for (int i = 0; i < onWIPItems.Length; i++)
{
MO mo = (MO)moFacade.GetMO(onWIPItems[i].MOCode);
int orgID = GlobalVariables.CurrentOrganizations.First().OrganizationID;
if (mo != null)
{
orgID = mo.OrganizationID;
}
Domain.MOModel.Material material = (Domain.MOModel.Material)itemFacade.GetMaterial(onWIPItems[i].MItemCode, orgID);
//changed by hiro 08/11/04
if (material != null)
{
_DataTableLoadedPart.Rows.Add(new object[] {
false,
false,
string.Empty,
i + 1,
onWIPItems[i].MItemCode,
onWIPItems[i].MOCode,
onWIPItems[i].MCARD,
material.MaterialDescription == null ? "" : material.MaterialDescription,
string.Empty,
onWIPItems[i].MCardType
});
}
//end by hiro
}
}
}
catch (Exception E)
{
msg.Add(new UserControl.Message(E));
}
return(msg);
}