private string MSDStatus(string status)
{
if (status == "MSD_PACKAGE")
{
return(MutiLanguages.ParserString("$CS_Package"));
}
else if (status == "MSD_OPENED")
{
return(MutiLanguages.ParserString("$CS_MSD_OPENED"));
}
else if (status == "MSD_ALLUSED")
{
return(MutiLanguages.ParserString("$CS_MSD_ALLUSED"));
}
//else if (status == "MSD_USING")
//{
// return "使用";
//}
else if (status == "MSD_DRYING")
{
return(MutiLanguages.ParserString("$CS_MSD_DRYING"));
}
else if (status == "MSD_BAKING")
{
return(MutiLanguages.ParserString("$CS_MSD_BAKING"));
}
else
{
return(MutiLanguages.ParserString("$CS_TimeOver"));
}
}
private void BuildCheckStatus()
{
this.drpCheckedStatusQuery.Clear();
this.drpCheckedStatusQuery.AddItem("", "");
this.drpCheckedStatusQuery.AddItem(MutiLanguages.ParserString("Y"), "Y");
this.drpCheckedStatusQuery.AddItem(MutiLanguages.ParserString("N"), "N");
this.drpCheckedStatusQuery.SelectedIndex = 1;
}
private void InitializeDUCT()
{
this.drpMaintainTYPE.Clear();
this.drpMaintainTYPE.AddItem("", "");
this.drpMaintainTYPE.AddItem(MutiLanguages.ParserString(EqpMaintType.EqpMaintType_USINGTYPE), EqpMaintType.EqpMaintType_USINGTYPE);
this.drpMaintainTYPE.AddItem(MutiLanguages.ParserString(EqpMaintType.EqpMaintType_DAYTYPE), EqpMaintType.EqpMaintType_DAYTYPE);
this.drpMaintainTYPE.SelectedIndex = 0;
}
private void btnOK_Click(object sender, EventArgs e)
{
try
{
//用户权限
systemSettingFacade = new SystemSettingFacade(this.DataProvider);
_facade = new SecurityFacade(this.DataProvider);
if (this.txtusercode.Value.Trim() == string.Empty)
{
this.lblInfo.Text = MutiLanguages.ParserString("$Error_User_Code_Empty");
txtusercode.TextFocus(false, true);
return;
}
// 未输入密码
if (this.txtpwd.Value.Trim() == string.Empty)
{
this.lblInfo.Text = MutiLanguages.ParserString("$Error_Password_Empty");
txtpwd.Focus();
return;
}
object COOPParameter = systemSettingFacade.GetParameter(this.txtusercode.Value.Trim().ToUpper(), paraGroup);
if (COOPParameter == null)
{
this.lblInfo.Text = MutiLanguages.ParserString("$CS_CurrentUser_Have_No_Right");
this.txtusercode.TextFocus(false, true);
return;
}
// 用户名不存在
object[] objUserGroup = null;
User user = _facade.LoginCheck(this.txtusercode.Value.Trim().ToUpper(), this.txtpwd.Value.Trim().ToUpper(), out objUserGroup);
if (user == null)
{
this.lblInfo.Text = MutiLanguages.ParserString("$Error_User_Not_Exist");
return;
}
m_isRightUser = true;
m_UserCode = this.txtusercode.Value.Trim().ToUpper();
this.Close();
}
catch (Exception ex)
{
this.ShowMessage(ex);
if (ex.Message == "$Error_Password_Not_Match")
{
this.txtpwd.Focus();
}
else
{
this.txtusercode.TextFocus(false, true);
}
}
}
protected string getMaintainType(string type)
{
if (type == "DAYTYPE")
{
return(MutiLanguages.ParserString("$CS_DAYTYPE"));
}
else if (type == "USINGTYPE")
{
return(MutiLanguages.ParserString("$CS_USINGTYPE"));
}
return("");
}
private void btnQuery_Click(object sender, EventArgs e)
{
DocumentFacade _documentFacade = new DocumentFacade(this.DataProvider);
object[] objs = _documentFacade.QueryDocuments(this.txtDocnameQuery.Value,
this.txtDocnumQuery.Value,
this.txtMcodelistQuery.Value,
this.txtOplistQuery.Value,
this.txtKeywordQuery.Value,
this.txtMemoQuery.Value,
FormatString(this.drpDoctypeQuery.SelectedItemValue),
FormatString(this.drpValidStatusQuery.SelectedItemValue),
FormatString(this.drpCheckedStatusQuery.SelectedItemValue),
1,
int.MaxValue
);
_DataTableLoadedPart.Clear();
if (objs == null)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Normal, "$CS_No_Data_To_Display"));
return;
}
for (int i = 0; i < objs.Length; i++)
{
DocForQuery doc = objs[i] as DocForQuery;
_DataTableLoadedPart.Rows.Add(new object[] {
doc.Docserial.ToString(),
doc.Dirserial.ToString(),
doc.Docname.ToString(),
doc.Docnum.ToString(),
doc.Docver.ToString(),
doc.DirName.ToString(),
doc.Itemlist.ToString(),
doc.Oplist.ToString(),
doc.Docchgnum.ToString(),
doc.Docchgfile.ToString(),
doc.Memo.ToString(),
doc.Keyword.ToString(),
doc.Doctype.ToString(),
MutiLanguages.ParserString(doc.Checkedstatus),
MutiLanguages.ParserString(doc.Validstatus),
FormatHelper.ToDateString(doc.Upfiledate),
doc.GetDisplayText("Upuser"),
FormatHelper.ToDateString(doc.Mdate),
doc.GetDisplayText("MaintainUser"),
FormatHelper.ToTimeString(doc.Mtime),
doc.ServerFileName.ToString()
});
}
}
private void QueryResult(string moCode, string mCode, string segCode, string ssCode, string opCode)
{
if (dataCollectFacade == null)
{
dataCollectFacade = new DataCollectFacade(this.DataProvider);
}
try
{
object[] objDis = dataCollectFacade.GetDisToLineList(moCode, mCode, segCode, ssCode, opCode);
DataLoadDetail.Clear();
if (objDis == null)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Normal, "$CS_No_Data_To_Display"));
return;
}
int cnt = 0;
foreach (DisToLineList list in objDis)
{
cnt++;
string leftMin = string.Empty;
//计算剩余生产时间
if (list.MssleftTime <= 59)
{
leftMin = Math.Ceiling(list.MssleftTime) + "秒";
}
else
{
leftMin = (Math.Ceiling(Convert.ToDecimal(list.MssleftTime / 60))).ToString() + "分" + Math.Ceiling(list.MssleftTime % 60) + "秒";
}
DataLoadDetail.Rows.Add(new object[] {
cnt,
list.Status,
MutiLanguages.ParserString("$CS_DisLine_" + list.Status),
list.MssdisQty,
list.MssleftQty,
leftMin,
list.MQty,
list.Delflag,
list.Delflag == "Y" ? "是" : "否",
});
}
}
catch (Exception ex)
{
ApplicationRun.GetInfoForm().Add(ex.Message);
}
}
private void btnExport_Click(object sender, EventArgs e)
{
System.Windows.Forms.SaveFileDialog save = new SaveFileDialog();
save.CheckPathExists = true;
//save.Filter = "数据文件(*.xls)|*.xls";
save.Filter = MutiLanguages.ParserString("$CS_ExportFilter");
save.DefaultExt = "xls";
save.Title = MutiLanguages.ParserString("$SaveTitle");
//save.Title = "保存当前数据";
if (save.ShowDialog() == System.Windows.Forms.DialogResult.OK)
{
ultraGridExcelExporter1.Export(ultraGridHead, save.FileName);
}
}
public void initGirdData()
{
Messages msg = new Messages();
_DataTableLoadedPart.Clear();
if (m_DataCollectFacade == null)
{
m_DataCollectFacade = new DataCollectFacade(this.DataProvider);
}
try
{
//加入工单的条件 add by klaus
string sourceRcard = m_DataCollectFacade.GetSourceCard(FormatHelper.CleanString(this.txtRcard.Text.Trim().ToUpper()), this.drownListMoCode.SelectedItemValue.ToString());
object[] objs = m_DataCollectFacade.QueryItemTracingFlow(sourceRcard,
Convert.ToString(this.drownListRouteCode.SelectedItemValue),
Convert.ToString(this.drownListMoCode.SelectedItemValue));
_DataTableLoadedPart.Clear();
if (objs == null)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Normal, "$CS_No_Data_To_Display"));
return;
}
for (int i = 0; i < objs.Length; i++)
{
OnWIP wip = objs[i] as OnWIP;
_DataTableLoadedPart.Rows.Add(new object[] {
wip.ItemCode.ToString(),
wip.RunningCard.ToString(),
wip.MOCode.ToString(),
MutiLanguages.ParserString(wip.ActionResult.ToString()),
wip.OPCode.ToString(),
GetOPResult(wip.Action),
wip.RouteCode.ToString(),
wip.SegmentCode.ToString(),
wip.StepSequenceCode.ToString(),
wip.ResourceCode.ToString(),
FormatHelper.ToDateString(wip.MaintainDate),
FormatHelper.ToTimeString(wip.MaintainTime),
wip.GetDisplayText("MaintainUser")
});
}
this.gridSimulation.DataSource = this._DataTableLoadedPart;
}
catch (Exception ex)
{
}
}
protected string getCycleString(string cycle)
{
if (cycle == "D")
{
return(MutiLanguages.ParserString("$CS_DAY"));
}
else if (cycle == "W")
{
return(MutiLanguages.ParserString("$CS_Week"));
}
else if (cycle == "M")
{
return(MutiLanguages.ParserString("$CS_Month"));
}
else if (cycle == "Y")
{
return(MutiLanguages.ParserString("$CS_Year"));
}
return("");
}
private void gridList_ClickCellButton(object sender, CellEventArgs e)
{
if (e.Cell.Column.Key.ToUpper() == "Edit".ToUpper())
{
string strStatusNo = ProductionStatus.ProductionStatus_NoProduction.ToString().Trim();
this.txtRCardEdit.Value = e.Cell.Row.Cells["Rcard"].Value.ToString();
this.txtMoCodeEdit.Value = e.Cell.Row.Cells["MOCode"].Value.ToString();
this.txtRelationQtyEdit.Value = e.Cell.Row.Cells["RelationQty"].Value.ToString();
this.txtRCardEdit.Enabled = false;
this.txtMoCodeEdit.Enabled = false;
this.txtRelationQtyEdit.Enabled = false;
this.ucBtnSave.Enabled = true;
this.ucBtnNew.Enabled = false;
if (e.Cell.Row.Cells["Status"].Value.ToString().Trim() == MutiLanguages.ParserString(strStatusNo))
{
this.txtRelationQtyEdit.Enabled = true;
this.txtRelationQtyEdit.TextFocus(false, true);
}
}
}
private void btnQuery_Click(object sender, EventArgs e)
{
if (ucLabelEditStorageCode.Value == string.Empty)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$ERROR_Storage_Must_Selected"));
this.ucLabelEditStorageCode.TextFocus(false, true);
return;
}
string storageCode = this.ucLabelEditStorageCode.Value.ToUpper().Trim();
string modelCode = this.ucLabelEditModelCode.Value.ToUpper().Trim();
ClearSampleList();//清空当前Grid信息
#region 查询获取数据
try
{
object[] obj = m_INVFacade.QueryMaterialFullMo(storageCode, modelCode);
if (obj == null)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$CS_Not_Find_Metrial"));
return;
}
foreach (MaterialFull materialFull in obj)
{
#region 主表数据
DataRow[] dataRowQty = m_CheckTable.Select(string.Format("MOCODE='{0}'", materialFull.MoCode));
if (dataRowQty.Length == 0)
{
DataRow rowCheckTable;
rowCheckTable = this.m_SampleList.Tables["CheckTable"].NewRow();
rowCheckTable["MOCODE"] = materialFull.MoCode;
rowCheckTable["ITEMCODE"] = materialFull.Itemcode;
rowCheckTable["ITEMDESC"] = materialFull.Modesc;
rowCheckTable["PLANTYPE"] = materialFull.PlanType;
rowCheckTable["PLANQTY"] = materialFull.Planqty;
rowCheckTable["PLANDATE"] = materialFull.Plandate;
if (materialFull.PlanType == "MO")
{
rowCheckTable["PLANTYPENAME"] = MutiLanguages.ParserString("MO");
}
if (materialFull.PlanType == "PLAN")
{
rowCheckTable["PLANTYPENAME"] = MutiLanguages.ParserString("PLAN");
}
this.m_SampleList.Tables["CheckTable"].Rows.Add(rowCheckTable);
if (rowCheckTable != null)
{
this.m_SampleList.Tables["CheckTable"].AcceptChanges();
}
}
#endregion
#region 子表数据
DataRow rowCheckTableDetail;
rowCheckTableDetail = this.m_SampleList.Tables["CheckTableDetail"].NewRow();
rowCheckTableDetail["MCODE"] = materialFull.MCode;
rowCheckTableDetail["MOCODE"] = materialFull.MoCode;
rowCheckTableDetail["MDESC"] = materialFull.Mdesc;
rowCheckTableDetail["QTY"] = materialFull.Qty;
rowCheckTableDetail["SHORTQTY"] = materialFull.ShortQty;
rowCheckTableDetail["LOSTQTY"] = materialFull.LostQty;
this.m_SampleList.Tables["CheckTableDetail"].Rows.Add(rowCheckTableDetail);
if (rowCheckTableDetail != null)
{
this.m_SampleList.Tables["CheckTableDetail"].AcceptChanges();
}
#endregion
}
this.m_SampleList.AcceptChanges();
this.ultraGridHead.DataSource = this.m_SampleList;
}
catch (Exception ex)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, ex.Message));
return;
}
#endregion
}
private void btnQuery_Click(object sender, System.EventArgs e)
{
string status = string.Empty;
if (smtfacade == null)
{
smtfacade = new SMTFacade(this.DataProvider);
}
if (mofacade == null)
{
mofacade = new MOFacade(this.DataProvider);
}
if (collectfacade == null)
{
collectfacade = new DataCollectFacade(this.DataProvider);
}
object[] objs = smtfacade.Querysmtrelation(this.txtMoCodeQuery.Value.Trim().ToUpper(),
this.txtPartNumber.Value.Trim().ToUpper(),
this.txtRCardQuery.Value.Trim().ToUpper(),
FormatHelper.TODateInt(this.startDate.Value),
FormatHelper.TODateInt(this.endDate.Value));
tableSource.Rows.Clear();
this.ucBtnNew.Enabled = true;
this.ucBtnSave.Enabled = false;
this.txtMoCodeEdit.Value = string.Empty;
this.txtRelationQtyEdit.Value = string.Empty;
this.txtRCardEdit.Value = string.Empty;
this.txtMoCodeEdit.Enabled = true;
this.txtRelationQtyEdit.Enabled = true;
this.txtRCardEdit.Enabled = true;
this.txtMoCodeEdit.TextFocus(false, true);
if (objs != null)
{
string strStatusClose = ProductionStatus.ProductionStatus_CloseProduction.ToString().Trim();
string strStatusin = ProductionStatus.ProductionStatus_InProduction.ToString().Trim();
string strStatusNo = ProductionStatus.ProductionStatus_NoProduction.ToString().Trim();
for (int i = 0; i < objs.Length; i++)
{
Smtrelationqty smt = (Smtrelationqty)objs[i];
DataRow row = tableSource.NewRow();
object simrepObj = collectfacade.GetSimulationReport(smt.Mocode.Trim().ToUpper(), smt.Rcard.Trim().ToUpper());
if (simrepObj != null)
{
if (((SimulationReport)simrepObj).IsComplete.Trim() == "1")
{
status = MutiLanguages.ParserString(strStatusClose);
}
else
{
status = MutiLanguages.ParserString(strStatusin);
}
}
else
{
status = MutiLanguages.ParserString(strStatusNo);
}
row["PartNumber"] = smt.Itemcode.ToString();
row["MOCode"] = smt.Mocode;
row["Rcard"] = smt.Rcard;
row["RelationQty"] = smt.Relationqtry;
row["Status"] = status;
row["MDate"] = FormatHelper.ToDateTime(smt.Mdate, smt.Mtime);
row["Edit"] = "";
tableSource.Rows.Add(row);
}
}
else
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Normal, "$CS_No_Data_To_Display"));
return;
}
}
/// <summary>
/// Check 从垛位使用状况的页面带过来的垛位和库位
/// </summary>
/// <returns>true/false</returns>
private bool CheckSelecetedStackAndStorage(string selectedStorage, string selectedStack, string originalStorage)
{
if (originalStorage.Trim().Length == 0)
{
//请输入库位
ApplicationRun.GetInfoForm().Add(
new UserControl.Message(MessageType.Error, "$CS_STORAGE_NOT_INPUT"));
return(false);
}
if (!selectedStorage.Equals(originalStorage))
{
InventoryFacade inventoryFacade = new InventoryFacade(this.DataProvider);
int stack2RCardCount = inventoryFacade.GetStack2RCardCount(selectedStack, originalStorage);
if (stack2RCardCount > 0)
{
//垛位和库别不对应
ApplicationRun.GetInfoForm().Add(
new UserControl.Message(MessageType.Error, "$CS_STACK_STORAGE_NOT_SAME"));
return(false);
}
else
{
//垛位和库别不对应,确定使用该垛位?
if (MessageBox.Show(UserControl.MutiLanguages.ParserMessage("$CS_STACK_STORAGE_NOT_SAME_CONFIRM"), MutiLanguages.ParserString("$ShowConfirm"), MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.No)
{
return(false);
}
}
}
return(true);
}
private void txtMLot_TxtboxKeyPress(object sender, KeyPressEventArgs e)
{
if (e.KeyChar == '\r')
{
string mLot = txtMLot.Value.ToUpper().Trim();
if (mLot == String.Empty)
{
this.ErrorMessage("$CS_MLot_Is_Empty");
this.txtMLot.TextFocus(false, true);
ClearInfo();
return;
}
//A.检查物料代码是否为湿敏物料。
InventoryFacade _facade = new InventoryFacade(this.DataProvider);
int Count = _facade.CheckMaterialByLotNO(mLot);
if (Count == 0)
{
this.ErrorMessage("$CS_MCode_IsNot_MSD");
this.txtMLot.TextFocus(false, true);
ClearInfo();
return;
}
//B.检查物料批号是否存在。
ItemLotForQuery itemLotForQuery = (ItemLotForQuery)_facade.GetItemLotDesc(mLot);
if (itemLotForQuery == null)
{
this.ErrorMessage("$CS_MLotInfo_IsNot_Exit");
this.txtMLot.TextFocus(false, true);
ClearInfo();
return;
}
//C.带出物料批号的相关信息,第一次做拆封时TBLMSDLOT不存在数据。
object objs = _facade.QueryMaterialMSD(mLot);
this.txtMCode.Text = objs == null ? itemLotForQuery.Mcode : ((MSDLOTLExc)objs).MCODE.ToString();
this.txtMName.Text = objs == null ? itemLotForQuery.MaterialName : ((MSDLOTLExc)objs).MNAME.ToString();
this.txtMDesc.Text = objs == null ? itemLotForQuery.MaterialDescription : ((MSDLOTLExc)objs).MDESC.ToString();
this.txtStatus.Text = objs == null?MutiLanguages.ParserString("$CS_Package") : MSDStatus(((MSDLOTLExc)objs).Status.ToString());
this.txtOverFloorlife.Text = string.Empty;
if (objs == null)
{
object msdLevel = _facade.GetMSDLevelByLotNo(mLot.Trim().ToUpper());
if (msdLevel != null)
{
this.txtOverFloorlife.Text = ((MSDLevel)msdLevel).FloorLife.ToString();
}
}
else
{
this.txtOverFloorlife.Text = ((MSDLOTLExc)objs).OverFloorlife.ToString();
}
this.txtMUser.Text = ApplicationService.Current().UserCode;
this.txtMDate.Text = objs == null ? "" : FormatHelper.ToDateString(((MSDLOTLExc)objs).MaintainDate);
this.txtMtime.Text = objs == null ? "" : FormatHelper.ToTimeString(((MSDLOTLExc)objs).MaintainTime);
#region IniultraOptionSetOperation
if (objs == null)
{
this.ultraOptionSetOperation.CheckedIndex = 1;
}
else if (((MSDLOTLExc)objs).Status.ToString() == "MSD_PACKAGE")
{
this.ultraOptionSetOperation.CheckedIndex = 0;
}
else if (((MSDLOTLExc)objs).Status.ToString() == "MSD_OPENED")
{
this.ultraOptionSetOperation.CheckedIndex = 1;
}
else if (((MSDLOTLExc)objs).Status.ToString() == "MSD_ALLUSED")
{
this.ultraOptionSetOperation.CheckedIndex = 2;
this.ErrorMessage("$CS_MSD_ALLUSED_Info"); //提示“该批湿敏原料已全部使用，不可操作。”
}
//else if (((MSDLOTLExc)objs).Status.ToString() == "MSD_USING")
//{
// this.ultraOptionSetOperation.CheckedIndex = 2;
//}
else if (((MSDLOTLExc)objs).Status.ToString() == "MSD_DRYING")
{
this.ultraOptionSetOperation.CheckedIndex = 3;
}
else if (((MSDLOTLExc)objs).Status.ToString() == "MSD_BAKING")
{
this.ultraOptionSetOperation.CheckedIndex = 4;
}
#endregion
this.ultraOptionSetOperation.Focus();
}
}
private bool initFlowPicBox()
{
clear();
string routeCode = "",
moCode = "",
itemCode;
object[] objs;
if (string.IsNullOrEmpty(Convert.ToString(this.drownListMoCode.SelectedItemValue)))
{
return(false);
}
moCode = Convert.ToString(this.drownListMoCode.SelectedItemValue);
if (string.IsNullOrEmpty(Convert.ToString(this.drownListRouteCode.SelectedItemValue)))
{
return(false);
}
routeCode = Convert.ToString(this.drownListRouteCode.SelectedItemValue);
Messages msg = new Messages();
if (m_DataCollectFacade == null)
{
m_DataCollectFacade = new DataCollectFacade(this.DataProvider);
}
try
{
//add
string sourceRcard = m_DataCollectFacade.GetSourceCard(FormatHelper.CleanString(txtRcard.Text.ToUpper()), this.drownListMoCode.SelectedItemValue.ToString());
//end
//object objLastSimRe = m_DataCollectFacade.GetLastSimulationReport(FormatHelper.CleanString(sourceRcard));
object objLastSimRe = m_DataCollectFacade.GetSimulationReport(this.drownListMoCode.SelectedItemValue.ToString(), FormatHelper.CleanString(sourceRcard));
if (objLastSimRe == null)
{
msg.Add(new UserControl.Message(MessageType.Error, "$Error_CS_ID_Not_Exist"));
txtRcard.SelectAll();
txtRcard.Focus();
ApplicationRun.GetInfoForm().Add(msg);
return(false);
}
else
{
SimulationReport currentSimRe = (SimulationReport)objLastSimRe;
itemCode = currentSimRe.ItemCode;
//查询当前途程工序捞TBLITEMROUTE2OP表
//QueryItemOpFlow(当前itemCode,当前途程Code);
objs = m_DataCollectFacade.QueryItemOpFlow(itemCode, routeCode);
if (objs == null)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Normal, "$CS_No_Data_To_Display"));
//add by klaus 置焦点
txtRcard.SelectAll();
txtRcard.Focus();
return(false);
}
#region 画流程图
this.panelDrawFlow.Controls.Clear();
this.panelDrawFlow.Refresh();
StartButton btnStart = new StartButton();
this.panelDrawFlow.Controls.Add(btnStart);
btnStart.setProcessName(MutiLanguages.ParserString("$CS_Start"));
btnStart.Location = new Point(10, 30);
btnStart.DrawButton();
FunctionButton lastOne = btnStart;
FlowButton btnFlow = new StraightArrowButton();
double vdegree = 0;
ItemRoute2OP currentOP = null;
for (int i = 0; i < objs.Length; i++)
{
ItemRoute2OP itemRoute2Op = objs[i] as ItemRoute2OP;
btnFlow = lastOne.AddOutArrow(vdegree);
Operation op = (Operation) new BaseModelFacade(this.DataProvider).GetOperation(itemRoute2Op.OPCode);
lastOne = btnFlow.AddOutProcess(itemRoute2Op.OPCode);
lastOne.Tag = itemRoute2Op.OPCode;
lastOne.ProcessID = op.OPDescription;
lastOne.DrawButton();
lastOne.BackColor = Color.Green;
lastOne.Click += new EventHandler(btn_Click);
//string actionResult = m_DataCollectFacade.CheckOpIsExist(FormatHelper.CleanString(txtRcard.Text.Trim().ToUpper()), moCode, routeCode, itemRoute2Op.OPCode);
string actionResult = m_DataCollectFacade.CheckOpIsExist(sourceRcard, moCode, routeCode, itemRoute2Op.OPCode);
if (string.IsNullOrEmpty(actionResult))
{
lastOne.BackColor = Color.White;
}
else
{
if (actionResult == ProductStatus.GOOD)
{
lastOne.BackColor = Color.Green;
}
else
{
lastOne.BackColor = Color.Red;
}
}
if (itemRoute2Op.OPCode == currentSimRe.OPCode &&
itemRoute2Op.RouteCode == currentSimRe.RouteCode)
{
currentOP = (ItemRoute2OP)objs[i];
if (currentSimRe.Status == ProductStatus.GOOD)
{
lastOne.BackColor = Color.Green;
}
else
{
lastOne.BackColor = Color.Red;
}
}
#region 注释 Terry 2012-11-13
//如果途程里工序是从0开始，显示背景有问题。
//if ((currentOP != null) && (i > currentOP.OPSequence - 1))
//{
// lastOne.BackColor = Color.WhiteSmoke;
//}
#endregion
if ((btnFlow as StraightArrowButton).Degree == 90)
{
vdegree = (vdegree + 180) % 360;
}
}
btnFlow = lastOne.AddOutArrow(vdegree);
EndButton btnEnd = btnFlow.AddEnd();
btnEnd.Text = MutiLanguages.ParserString("$CS_End");
btnEnd.BackColor = lastOne.BackColor;
#endregion
return(true);
}
}
catch (Exception ex)
{
msg.Add(new UserControl.Message(ex));
ApplicationRun.GetInfoForm().Add(msg);
txtRcard.Focus();
return(false);
}
}
private void ucButton2_Click(object sender, EventArgs e)
{
Messages messages = new Messages();
if (rCardEditor.Text.Trim() == String.Empty)
{
messages.Add(new UserControl.Message(MessageType.Error, "$CSError_RCard_CanNot_Empty"));
ApplicationRun.GetInfoForm().Add(messages);
return;
}
DataCollectFacade dataCollectFacade = new DataCollectFacade(this.DataProvider);
string sourceRCard = dataCollectFacade.GetSourceCard(rCardEditor.Text.Trim().ToUpper(), string.Empty);
string tsStatus;
//Laws Lu,2005/11/22,新增 添加代理录入人员
//modified by jessie lee, 2005/11/24
string userCode = ApplicationService.Current().UserCode;
if (txtAgentUser.Checked == true && txtAgentUser.Value.Trim().Length == 0)
{
messages.Add(new UserControl.Message(MessageType.Error, "$CS_Error_Vicegerent_CanNot_Empty"));
ApplicationRun.GetInfoForm().Add(messages);
return;
}
else if (txtAgentUser.Checked == true && txtAgentUser.Value != String.Empty)
{
if ((new BenQGuru.eMES.Security.SecurityFacade(this.DataProvider)).CheckResourceRight(txtAgentUser.Value.Trim().ToUpper()
, ApplicationService.Current().ResourceCode))
{
userCode = txtAgentUser.Value;
}
else
{
messages.Add(new UserControl.Message(MessageType.Error, "$CS_Error_Vicegerent_Is_Wrong"));
ApplicationRun.GetInfoForm().Add(messages);
return;
}
}
if (ultraCheckEditor1.Checked == true)
{
tsStatus = TSStatus.TSStatus_Reflow;
//勾选回流，然后不工位栏位未选资料也可允许通过。在业务上回流是一定有确定的工位的。
//系统要检查此时保存，工位是否为空。
if (ucLabComboxOPCode.SelectedItemText == string.Empty)
{
messages.Add(new UserControl.Message(MessageType.Error, "$CS_Error_ReflowOPCode_CanNot_Empty"));
ApplicationRun.GetInfoForm().Add(messages);
ucLabComboxOPCode.Focus();
return;
}
}
else if (ultraCheckEditorScrap.Checked == true)
{
tsStatus = TSStatus.TSStatus_Scrap;
}
else
{
tsStatus = TSStatus.TSStatus_Complete;
// //修改,Karron Qiu 2005-9-23
// //线上采集的不良品，修复后则“回流”；修不好则“报废”。而不选“回流”或“报废”代表该产品要入了良品库，
// //线上的不良品修好后是直接回产线回流，不需要入良品库的
// messages.Add(new UserControl.Message(MessageType.Error,"$CSError_Please_Select_Reflow_OR_Scrap"));//请选择回流或者报废
// ApplicationRun.GetInfoForm().Add(messages);
// return;
}
ActionFactory actionFactory = new ActionFactory(this.DataProvider);
IAction actionTSComplete = actionFactory.CreateAction(ActionType.DataCollectAction_TSComplete);
TSActionEventArgs actionEventArgs = new TSActionEventArgs(
ActionType.DataCollectAction_TSComplete,
FormatHelper.PKCapitalFormat(FormatHelper.CleanString(sourceRCard)),
userCode,
ApplicationService.Current().ResourceCode,
tsStatus,
this.ucLabEditMOCode.Value,
this.ucLabEditItemCode.Value,
this.ucLabEditRoute.Value,
this.ucLabComboxOPCode.SelectedItemText,
ApplicationService.Current().UserCode,
FormatHelper.CleanString(this.txtScrapCause.Text, 100));
//修改 Karron Qiu 2005-9-26
//在做维修完成处理时，依然按照之前的检查逻辑
//（不良品是否“已选不良零件”或“已选不良位置”有信息），如果没有，则弹出提示信息，
//比如：“该不良品无“不良零件”或“不良位置”信息，是否要维修完成”，
//点击“确认”即维修完成，点击“取消”则维修完成失败
TSFacade tsFacade = new TSFacade(this.DataProvider);
object obj = tsFacade.GetCardLastTSRecord(actionEventArgs.RunningCard);
if (obj == null)
{
messages.Add(new UserControl.Message(MessageType.Error, "$CSError_Card_Not_In_TS"));
ApplicationRun.GetInfoForm().Add(messages);
return;
}
else
{
Domain.TS.TS ts = (Domain.TS.TS)obj;
if (tsFacade.CheckErrorCodeCountAndErrorSolutionForTSComplete(actionEventArgs.RunningCard))
{
if (!tsFacade.CheckErrorPartAndErrorLocationForTSComplete(actionEventArgs.RunningCard))
{
if (System.Windows.Forms.MessageBox.Show(null, MutiLanguages.ParserString("$CS_No_ErrorPartAndLoc_Is_Com"), "", System.Windows.Forms.MessageBoxButtons.OKCancel) == System.Windows.Forms.DialogResult.Cancel)
{
return;
}
}
}
else
{
messages.Add(new UserControl.Message(MessageType.Error, "$CSError_Card_TSStatus_IsNot_TS $Current_Status $" + ts.TSStatus));
ApplicationRun.GetInfoForm().Add(messages);
return;
}
}
//karron qiu ,2005/9/16 ,增加try catch,在catch中添加rollback操作
DataProvider.BeginTransaction();
try
{
messages.AddMessages(actionTSComplete.Execute(actionEventArgs));
if (!messages.IsSuccess())
{
this.DataProvider.RollbackTransaction();
ApplicationRun.GetInfoForm().Add(messages);
}
else
{
this.DataProvider.CommitTransaction();
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Success, "$CS_TSScrap_SUCCESS"));
}
}
catch
{
this.DataProvider.RollbackTransaction();
throw;
}
finally
{
(DataProvider as SQLDomainDataProvider).PersistBroker.CloseConnection();
}
}
//根据LastAction显示工序结果
public static string GetOPResult(string lastAction)
{
string opResult = string.Empty;
try
{
string moduleName = ActionType.GetOperationResultModule(lastAction);
switch (moduleName)
{
case "Testing":
opResult = MutiLanguages.ParserString("ItemTracing_testing");
break;
case "ComponentLoading":
opResult = MutiLanguages.ParserString("ItemTracing_componentloading");
break;
case "IDTranslation":
opResult = MutiLanguages.ParserString("ItemTracing_sn");
break;
case "Packing":
opResult = MutiLanguages.ParserString("ItemTracing_packing");
break;
case "UnPacking":
opResult = MutiLanguages.ParserString("ItemTracing_unpacking");
break;
case "TS":
opResult = MutiLanguages.ParserString("ItemTracing_ts");
break;
case "OQC":
opResult = MutiLanguages.ParserString("ItemTracing_oqc");
break;
//以下非工序结果 "Reject", "GoMO","ECN","SoftINFO","TRY"
case "Reject":
opResult = MutiLanguages.ParserString("ItemTracing_Reject");
break;
case "GoMO":
opResult = MutiLanguages.ParserString("ItemTracing_GoMO");
break;
case "ECN":
opResult = MutiLanguages.ParserString("ItemTracing_ECN");
break;
case "SoftINFO":
opResult = MutiLanguages.ParserString("ItemTracing_SoftINFO");
break;
case "TRY":
opResult = MutiLanguages.ParserString("ItemTracing_TRY");
break;
case "OutsideRoute":
opResult = MutiLanguages.ParserString("ItemTracing_OutsideRoute");
break;
case "SMT":
opResult = MutiLanguages.ParserString("ItemTracing_SMT");
break;
case "SPC":
opResult = MutiLanguages.ParserString("ItemTracing_SPC");
break;
case "DeductBOMItem":
opResult = MutiLanguages.ParserString("ItemTracing_DeductBOMItem");
break;
case "MidistOutput":
opResult = MutiLanguages.ParserString("ItemTracing_MidistOutput");
break;
case "BurnIn":
opResult = MutiLanguages.ParserString("ItemTracing_BurnIn");
break;
case "BurnOut":
opResult = MutiLanguages.ParserString("ItemTracing_BurnOut");
break;
default:
opResult = string.Empty;
break;
}
return(opResult);
}
catch
{
}
return(opResult);
}
//Process Carton NO
private void ProcessCarton(string cartonno)
{
DataCollectFacade dcf = new DataCollectFacade(DataProvider);
string rCard = txtRCard.Value.Trim().ToUpper();
rCard = dcf.GetSourceCard(rCard, string.Empty);
//箱号为空时，表示序列号从旧箱中移除
if (cartonno == String.Empty)
{
#region RCARD 从 Carton中移出
if (DialogResult.OK == MessageBox.Show(this, MutiLanguages.ParserString("$CS_Confirm_Transfer_1") + " " + txtRCard.Value.Trim().ToUpper() + " "
+ MutiLanguages.ParserString("$CS_Confirm_Transfer_2") + txtCurrentCarton.Value.Trim().ToUpper() + " " + MutiLanguages.ParserString("$CS_Confirm_Transfer_3"), MutiLanguages.ParserString("$ShowConfirm"), MessageBoxButtons.OKCancel))
{
InventoryFacade materialDCF = new InventoryFacade(DataProvider);
object objSimulationReport = dcf.GetLastSimulationReport(rCard);
//在制品存在
if (objSimulationReport != null)
{
Domain.DataCollect.SimulationReport sim = objSimulationReport as Domain.DataCollect.SimulationReport;
sim.CartonCode = String.Empty;
PackageFacade pf = new PackageFacade(DataProvider);
#region 移出操作
DataProvider.BeginTransaction();
try
{
dcf.RemoveFromCarton(sim.RunningCard, ApplicationService.Current().UserCode);
//dcf.RemoveFromPallet2RCard(sim.RunningCard);
DataProvider.CommitTransaction();
ucMessage.Add(new UserControl.Message(MessageType.Success
, "$CS_RCARD_BREAK_FROM_CARTON_SUCCESS $CS_Param_ID =" + txtRCard.Value.Trim().ToUpper()));
txtRCard.TextFocus(true, true);
txtCartonNO.Value = String.Empty;
ClearRCardInfo();
}
catch (Exception ex)
{
DataProvider.RollbackTransaction();
ucMessage.Add(new UserControl.Message(ex));
txtCartonNO.TextFocus(true, true);
}
finally
{
(DataProvider as SQLDomainDataProvider).PersistBroker.CloseConnection();
}
#endregion
}
else//在制品不存在
{
ucMessage.Add(new UserControl.Message(MessageType.Error
, "$NoSimulation $CS_Param_ID =" + txtRCard.Value.Trim().ToUpper()));
ClearRCardInfo();
txtRCard.TextFocus(true, true);
}
}
#endregion
}
else
{
#region RCARD 从当前Carton移转到另外一个Carton
InventoryFacade materialDCF = new InventoryFacade(DataProvider);
//ActionOnLineHelper onlineHelper = new ActionOnLineHelper(DataProvider);
if (!CheckTargetCarton(cartonno))
{
if (!m_NeedAddNewCarton)
{
txtCartonNO.TextFocus(true, true);
return;
}
}
string sourceCard = dcf.GetSourceCard(txtRCard.Value.Trim().ToUpper(), string.Empty);
object objSimulationReport = dcf.GetLastSimulationReport(sourceCard);
if (objSimulationReport != null)
{
Domain.DataCollect.SimulationReport simulationReport = objSimulationReport as Domain.DataCollect.SimulationReport;
simulationReport.CartonCode = cartonno.Trim().ToUpper();
Package.PackageFacade pf = new BenQGuru.eMES.Package.PackageFacade(DataProvider);
#region 移转操作
DataProvider.BeginTransaction();
try
{
//Add By Bernard @ 2010-11-01
string moCode = txtMoCode.Value.Trim().ToUpper();
string oldCartonno = txtCurrentCarton.Value.Trim().ToUpper();
bool m_HasCartonAdded = false;
//end
//包装箱不存在，为CartonInfo表增加一个包装箱信息
if (m_NeedAddNewCarton)
{
DBDateTime currentDateTime = FormatHelper.GetNowDBDateTime(DataProvider);
BenQGuru.eMES.Domain.Package.CARTONINFO newCarton = new BenQGuru.eMES.Domain.Package.CARTONINFO();
newCarton.CARTONNO = cartonno.Trim().ToUpper();
newCarton.CAPACITY = ((new ItemFacade(DataProvider)).GetItem(simulationReport.ItemCode, GlobalVariables.CurrentOrganizations.First().OrganizationID) as Item).ItemCartonQty;
newCarton.COLLECTED = 0;
newCarton.EATTRIBUTE1 = "";
newCarton.PKCARTONID = System.Guid.NewGuid().ToString().ToUpper();
newCarton.MUSER = ApplicationService.Current().UserCode;
newCarton.MDATE = currentDateTime.DBDate;
newCarton.MTIME = currentDateTime.DBTime;
pf.AddCARTONINFO(newCarton);
//0.向tblcarton2rcard表增加一个包装箱 Add By Bernard @ 2010-11-01
Carton2RCARD newCarton2RCard = new Carton2RCARD();
newCarton2RCard.CartonCode = cartonno.Trim().ToUpper();
newCarton2RCard.Rcard = rCard;
newCarton2RCard.MUser = ApplicationService.Current().UserCode;
newCarton2RCard.MDate = currentDateTime.DBDate;
newCarton2RCard.MTime = currentDateTime.DBTime;
newCarton2RCard.Eattribute1 = "";
newCarton2RCard.MOCode = moCode;
pf.AddCarton2RCARD(newCarton2RCard);
m_HasCartonAdded = true;
//end
}
//1.判断新箱与旧箱内产品工单代码是否一致 Add By Bernard @ 2010-11-01
object oldObj = pf.GetCarton2RCARD(oldCartonno, rCard);
//modified by lisa @20120829
//string newMOCode = moCode;
object[] newObj = pf.GetCarton2RCARDByCartonNO(FormatHelper.CleanString(this.txtCartonNO.Value.Trim()));
string newMOCode = ((Carton2RCARD)newObj[0]).MOCode;
//end add
string oldMOCode = ((Carton2RCARD)oldObj).MOCode;
if (oldMOCode == newMOCode) //工单代码一致
{
if (m_HasCartonAdded == false) //箱号没有新增,则向Carton2RCard新增一条记录
{
DBDateTime currentDateTime = FormatHelper.GetNowDBDateTime(DataProvider);
Carton2RCARD carton2rcard = new Carton2RCARD();
carton2rcard.Rcard = rCard;
carton2rcard.CartonCode = cartonno;
carton2rcard.MOCode = moCode;
carton2rcard.MUser = ApplicationService.Current().UserCode;
carton2rcard.MDate = currentDateTime.DBDate;
carton2rcard.MTime = currentDateTime.DBTime;
carton2rcard.Eattribute1 = "";
pf.AddCarton2RCARD(carton2rcard);
}
//end
dcf.RemoveFromCarton(simulationReport.RunningCard, ApplicationService.Current().UserCode);
pf.UpdateCollected(cartonno.Trim().ToUpper());
Domain.DataCollect.Simulation simulation = (Domain.DataCollect.Simulation)dcf.GetSimulation(simulationReport.RunningCard);
if (simulation != null)
{
simulation.CartonCode = cartonno.Trim().ToUpper();
dcf.UpdateSimulation(simulation);
}
dcf.UpdateSimulationReport(simulationReport);
//记log
pf.addCarton2RCARDLog(cartonno, simulationReport.RunningCard, ApplicationService.Current().UserCode);
//end
}
else//新旧包装箱工单代码不一致 Add By Bernard @ 2010-11-01
{
if (m_HasCartonAdded == true)
{
//删除CartonInfo表新增加的包装箱
CARTONINFO cartoninfo = new CARTONINFO();
cartoninfo.CARTONNO = cartonno;
pf.DeleteCARTONINFO(cartoninfo);
//删除旧Carton2RCARD表新增加的箱号
Carton2RCARD carton2rcard = new Carton2RCARD();
carton2rcard.Rcard = rCard;
carton2rcard.CartonCode = cartonno;
pf.DeleteCarton2RCARD(carton2rcard);
}
else
{
DataProvider.RollbackTransaction();
ucMessage.Add(new UserControl.Message(MessageType.Error,
"$CS_CARTON_NO :" + cartonno + "$CS_Which_MOCode_With_RCard :" + rCard + "$CS_For_Carton_No's_MOCode_Is_Different"));
txtCartonNO.TextFocus(true, true);
return;
}
}
//end
DataProvider.CommitTransaction();
ucMessage.Add(new UserControl.Message(MessageType.Success
, "$CS_RCARD_TRANSFER_CARTON_SUCCESS $CS_Param_ID =" + txtRCard.Value.Trim().ToUpper()));
txtRCard.TextFocus(true, true);
txtCartonNO.Value = String.Empty;
ClearRCardInfo();
}
catch (Exception ex)
{
DataProvider.RollbackTransaction();
ucMessage.Add(new UserControl.Message(ex));
txtCartonNO.TextFocus(true, true);
}
finally
{
(DataProvider as SQLDomainDataProvider).PersistBroker.CloseConnection();
}
#endregion
}
else
{
ucMessage.Add(new UserControl.Message(MessageType.Error, "$NoSimulation $CS_Param_ID =" + txtRCard.Value.Trim().ToUpper()));
ClearRCardInfo();
txtRCard.TextFocus(true, true);
}
#endregion
}
}