public void AddFeature(SldWorks SwApp, ModelDoc2 SwModel, Point2D P1, Point2D P2)
{
if (CheckUsing() == false)
{
return;
}
SwModel.ClearSelection2(true);
double L = P2.x - P1.x; // stage length
SketchManager sketchManager = SwModel.SketchManager;
FeatureManager featureManager = SwModel.FeatureManager;
Helper helper = new Helper(SwModel, SwApp);
helper.select_feature("RefPlane", 2, false, 0);
if (P1.x > 0)
// if x cordinat of first point is 0 we use stantart plane, else - make new refplane by offset
{
SwModel.CreatePlaneAtOffset(P1.x, false);
}
sketchManager.InsertSketch(true);
#region //Squre
if (keyProfileType == (object)"Squre") // make squre stage for key (out)
{
sketchManager.CreateCenterRectangle(0, 0, 0, (keyProfileWidth / 2),
(keyProfileWidth / 2), 0);
featureManager.FeatureCut3(true, true, true, 0, 0, L, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); // add cut feature
}
#endregion
#region //Special
if (keyProfileType == (object)"Speacial") // make special stage for key (out)
{
double H = Math.Sqrt((Math.Pow((2 * P1.y), 2) - Math.Pow(keyProfileWidth, 2)));
sketchManager.Create3PointArc((keyProfileWidth / 2), (H / 2), 0,
(-1 * keyProfileWidth / 2), (H / 2), 0, 0, P1.y, 0); // Top arc
sketchManager.Create3PointArc((keyProfileWidth / 2), (-1 * H / 2), 0, (-1 * keyProfileWidth / 2),
(-1 * H / 2), 0, 0, (-1 * P1.y), 0); // Bottom arc
sketchManager.CreateLine((keyProfileWidth / 2), (H / 2), 0, (keyProfileWidth / 2),
(-1 * H / 2), 0); // Left line
sketchManager.CreateLine((-1 * keyProfileWidth / 2), (H / 2), 0, (-1 * keyProfileWidth / 2),
(-1 * H / 2), 0); // Rigth line
featureManager.FeatureCut3(true, true, true, 0, 0, L, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); // add cut feature
sketchManager.InsertSketch(false);
}
#endregion
#region // Hexagon
if (keyProfileType == (object)"Hexagon") // make squre stage for key (out)
{
sketchManager.CreatePolygon(0, 0, 0, 0, P1.y, 0, 6, false);
featureManager.FeatureCut3(true, true, true, 0, 0, L, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); // add cut feature
}
#endregion
helper.HidePlanes();
}
public void AddFeature(SldWorks SwApp, ModelDoc2 SwModel, Point2D P1, Point2D P2)
{
if (CheckUsing() == false)
{
return;
}
SwModel.ClearSelection2(true);
Helper helper = new Helper(SwModel, SwApp);
SelectionMgr selectionMgr = SwModel.SelectionManager;
SketchManager sketchManager = SwModel.SketchManager;
FeatureManager featureManager = SwModel.FeatureManager;
const double Aprox = 0.0005; // needs to make correct theard
Sketch swSketch = default(Sketch);
double L = P2.x - P1.x;
helper.select_feature("RefPlane", 2, false, 0);
if (P1.x > 0)
{
SwModel.CreatePlaneAtOffset(P1.x, false);
}
sketchManager.InsertSketch(true);
// create helix
sketchManager.CreateCircleByRadius(0, 0, 0, P1.y);
SwModel.InsertHelix(false, theardCW, false, true, 2, L, theardPinch, 0, 0, 0);
SwModel.ClearSelection2(true);
#region //Triangle profile
if (theardType == (object)"Triangle")
{
double XL = (P1.y - theardR) / 2; // haf of triangle base
double YL = XL * (double)Math.Sqrt(3); // median of triangle
helper.select_feature("RefPlane", 1, false, 0);
sketchManager.InsertSketch(true);
sketchManager.CreateLine((P1.x - XL + Aprox), P1.y, 0, (P1.x + XL - Aprox), P1.y, 0);
sketchManager.CreateLine((P1.x - XL + Aprox), P1.y, 0, P1.x, (P1.y - YL), 0);
sketchManager.CreateLine((P1.x + XL - Aprox), P1.y, 0, P1.x, (P1.y - YL), 0);
}
#endregion
#region //Trapeze profile
if (theardType == (object)"Trapeze")
{
helper.select_feature("RefPlane", 1, false, 0);
sketchManager.InsertSketch(true);
double H = (P1.y - theardR) / 2; // haf of trapaze top base and heigth
double ctgA = 1 / Math.Tan(helper.ToRad(105)); // ctg value of bottom base angle
double A = 2 * (H - Aprox) + 4 * H * ctgA;
sketchManager.CreateLine((P1.x - H / 2 + Aprox), P1.y, 0, (P1.x + H / 2 - Aprox), P1.y, 0);
sketchManager.CreateLine((P1.x - H / 2 + Aprox), P1.y, 0, (P1.x - (A / 4)), P1.y - H, 0);
sketchManager.CreateLine((P1.x + H / 2 - Aprox), P1.y, 0, (P1.x + (A / 4)), P1.y - H, 0);
sketchManager.CreateLine((P1.x - (A / 4)), P1.y - H, 0, (P1.x + (A / 4)), P1.y - H, 0);
}
#endregion
swSketch = SwModel.GetActiveSketch2() as Sketch;
SwModel.EditRebuild3(); // model rebuild needs to make cutsweep feature avaible
Entity ent = swSketch as Entity;
ent.Select2(false, 1); // select sketch using mark 1 for sweep cut
helper.select_feature("Helix", helper.get_features_count("Helix") - 1, true, 4);
featureManager.InsertCutSwept4(false, true, 0, false, false, 0, 0, false, 0, 0, 0, 0, true, true, 0,
true, true, true, false);
helper.HidePlanes();
}
public void AddFeature(SldWorks SwApp, ModelDoc2 SwModel, Point2D P1, Point2D P2)
{
if (CheckUsing() == false)
{
return;
}
SwModel.ClearSelection2(true);
object[] seating_types = new[] { "None", "Prismatic A", "Prismatic B", "Segmented" };
object[] operations_types = new[] { "None", "Chamfer", "Fillet" }; // array of operation names
Helper helper = new Helper(SwModel, SwApp);
FeatureManager featureManager = SwModel.FeatureManager;
SketchManager sketchManager = SwModel.SketchManager;
SelectionMgr selectionMgr = (SelectionMgr)SwModel.SelectionManager;
Entity ent = default(Entity);
Array facesArray = default(Array);
Array edgesArray = default(Array);
Feature swFeature = default(Feature);
Face2 face2 = default(Face2); // neds to get edges of selected face
double LStage = 0;
double x_center = 0;
double y_center = 0;
double L = 0;
double W = 0;
bool append = false;
LStage = P2.x - P1.x; // length of current stage
x_center = P1.x + (LStage / 2) + seatingOffset; // center of current stage
y_center = 0;
L = x_center + seatingLength / 2;
W = seatingWidth / 2;
SwModel.ClearSelection2(true);
#region // make prismatic A keyseat
if (seatingType == seating_types[1]) //Prismatic A
{
helper.select_feature("RefPlane", 1, false, 0);
SwModel.CreatePlaneAtOffset(P1.y, false);
sketchManager.InsertSketch(true);
sketchManager.CreateCenterRectangle(x_center, y_center, 0, L, W, 0);
SwModel.FeatureManager.FeatureCut3(true, false, false, 0, 0, seatingDepth, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); // add cut feature
if (seatingOpearationType != operations_types[0]) // add chamfer or fillet, if none or value is 0 - pass
{
swFeature = (Feature)selectionMgr.GetSelectedObject6(1, -1);
facesArray = (Array)swFeature.GetFaces();
ent = facesArray.GetValue(0) as Entity;
ent.Select4(false, null);
if (seatingOpearationType == operations_types[1])
{
featureManager.InsertFeatureChamfer(4, 1, seatingChamferFilletValue, helper.ToRad(45), 0, 0, 0,
0);
}
if (seatingOpearationType == operations_types[2])
{
SwModel.FeatureManager.FeatureFillet(195, seatingChamferFilletValue, 0,
0, null, null, null);
}
swFeature = selectionMgr.GetSelectedObject6(1, -1);
swFeature.Select2(false, 4); //create selection for pattern
append = true;
}
CreatePattern(helper, append, SwModel, swFeature, selectionMgr);
}
#endregion
#region // make prismatic B keyseat
if (seatingType == seating_types[2]) //Prismatic B
{
W = seatingWidth; //Width
helper.select_feature("RefPlane", 1, false, 0);
SwModel.CreatePlaneAtOffset(P1.y, false);
sketchManager.InsertSketch(true);
sketchManager.CreateSketchSlot((int)swSketchSlotCreationType_e.swSketchSlotCreationType_line,
(int)swSketchSlotLengthType_e.swSketchSlotLengthType_CenterCenter, W, L - seatingLength, 0, 0, L, 0,
0,
0, 0, 0, 1, false);
SwModel.FeatureManager.FeatureCut3(true, false, false, 0, 0, seatingDepth, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false);
if (seatingOpearationType != operations_types[0]) // add chamfer or fillet, if none or value is 0 - pass
{
swFeature = (Feature)selectionMgr.GetSelectedObject6(1, -1);
facesArray = (Array)swFeature.GetFaces();
ent = facesArray.GetValue(0) as Entity;
ent.Select4(false, null);
if (seatingOpearationType == operations_types[1])
{
featureManager.InsertFeatureChamfer(4, 1,
seatingChamferFilletValue, helper.ToRad(45), 0, 0, 0, 0);
}
if (seatingOpearationType == operations_types[2])
{
SwModel.FeatureManager.FeatureFillet(195, seatingChamferFilletValue, 0,
0, null, null, null);
}
swFeature = selectionMgr.GetSelectedObject6(1, -1);
swFeature.Select2(false, 4); //create selection for pattern
append = true;
}
CreatePattern(helper, append, SwModel, swFeature, selectionMgr);
}
#endregion
#region // make segmented seatkey
if (seatingType == seating_types[3]) //Segmented
{
helper.select_feature("RefPlane", 0, false, 0);
sketchManager.InsertSketch(true);
sketchManager.Create3PointArc(L - seatingLength, P1.y, 0, L, P1.y, 0, x_center, (P1.y - seatingDepth), 0);
sketchManager.CreateLine(L - seatingLength, P1.y, 0, L, P1.y, 0); //close sketsh
SwModel.FeatureManager.FeatureCut3(true, false, false, 6, 0, (seatingWidth), 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); //cut from mide plane
if (SeatingOpearationType != operations_types[0]) // add chamfer or fillet, if nono or value is 0 - pass
{
// select edges for chamfering or filleting
swFeature = (Feature)selectionMgr.GetSelectedObject6(1, -1);
facesArray = (Array)swFeature.GetFaces();
SelectData selectData = selectionMgr.CreateSelectData();
ent = facesArray.GetValue(2) as Entity;
ent.Select4(false, selectData);
face2 = selectionMgr.GetSelectedObject6(1, -1);
edgesArray = (Array)face2.GetEdges();
ent = edgesArray.GetValue(0) as Entity;
ent.Select4(false, null);
ent = edgesArray.GetValue(2) as Entity;
ent.Select4(true, null);
// select edges for chamfering or filleting
// MessageBox.Show("" + face2.GetEdgeCount());
if (seatingOpearationType == operations_types[1])
{
featureManager.InsertFeatureChamfer(4, 1, seatingChamferFilletValue, helper.ToRad(45), 0, 0, 0,
0);
}
if (seatingOpearationType == operations_types[2])
{
SwModel.FeatureManager.FeatureFillet(195, seatingChamferFilletValue, 0, 0, null, null, null);
}
swFeature = selectionMgr.GetSelectedObject6(1, -1);
swFeature.Select2(false, 4); //create selection for pattern
append = true;
}
CreatePattern(helper, append, SwModel, swFeature, selectionMgr);
}
#endregion
helper.HidePlanes();
}