/// <summary>
/// 添加
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void simpleButton1_Click(object sender, EventArgs e)
{
Mod_TQC_COMPRE_ITEM_RESULT modResult = bllTqcCompreItemResult.GetModel(strBatch, strGZ, strBZ);
if (modResult != null)
{
Mod_TQB_DESIGN_ITEM modDesign = bllTqbDesignItem.GetModel(modResult.C_DESIGN_NO, str_CHARACTER_ID);
if (modDesign == null)
{
MessageBox.Show("标准中没有找到正要添加的这项！");
return;
}
else
{
Mod_TQC_COMPRE_ITEM_RESULT model = new Mod_TQC_COMPRE_ITEM_RESULT();
model.C_STOVE = modResult.C_STOVE;
model.C_BATCH_NO = modResult.C_BATCH_NO;
model.C_STL_GRD = modResult.C_STL_GRD;
model.C_SPEC = modResult.C_SPEC;
model.C_STD_CODE = modResult.C_STD_CODE;
model.C_CHARACTER_ID = str_CHARACTER_ID;
model.C_ITEM_NAME = btn_Name.Text;
model.C_TYPE = modDesign.C_TYPE;
model.C_UNIT = modDesign.C_UNIT;
model.C_QUANTITATIVE = modDesign.C_QUANTITATIVE;
model.C_VALUE = txt_Value.Text;
model.C_CHECK_STATE = "0";
model.C_EMP_ID = RV.UI.UserInfo.userID;
model.C_DESIGN_NO = modResult.C_DESIGN_NO;
model.N_PRINT_ORDER = modDesign.N_PRINT_ORDER;
model.C_IS_SHOW = modDesign.C_IS_PRINT;
model.C_IS_DECIDE = modDesign.C_IS_DECIDE;
if (modDesign.C_TYPE == "成分")
{
model.C_GROUP = "1";
}
else
{
int i_Group = bllTqcCompreItemResult.Get_Max_Group(modResult.C_BATCH_NO, modResult.C_STOVE, modResult.C_STL_GRD, modResult.C_STD_CODE, str_CHARACTER_ID);
model.C_GROUP = (i_Group + 1).ToString();
}
model.C_SOURCE = "1";
if (bllTqcCompreItemResult.Add(model))
{
MessageBox.Show("添加成功！");
this.Close();
}
}
}
else
{
MessageBox.Show("没有找到质量设计信息！");
return;
}
}
/// <summary>
/// 添加成分明细信息
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btn_Add_CF_Click(object sender, EventArgs e)
{
try
{
DataRow dr = this.gv_JCSJ.GetDataRow(this.gv_JCSJ.FocusedRowHandle);
if (dr == null)
{
return;
}
Mod_TQB_DESIGN_ITEM mod = new Mod_TQB_DESIGN_ITEM();
mod.C_DESIGN_ID = str_id;
mod.C_CHARACTER_ID = dr["C_ID"].ToString();
Mod_TQB_CHARACTER mod_character = bll_CharaCter.GetModel(mod.C_CHARACTER_ID);
if (mod_character.C_NAME == "C")//检测是否添加‘碳硅锰磷硫’
{
mod.N_PRINT_ORDER = 1;
}
else if (mod_character.C_NAME == "Si")//检测是否添加‘碳硅锰磷硫’
{
mod.N_PRINT_ORDER = 2;
}
else if (mod_character.C_NAME == "Mn")//检测是否添加‘碳硅锰磷硫’
{
mod.N_PRINT_ORDER = 3;
}
else if (mod_character.C_NAME == "P")//检测是否添加‘碳硅锰磷硫’
{
mod.N_PRINT_ORDER = 4;
}
else if (mod_character.C_NAME == "S")//检测是否添加‘碳硅锰磷硫’
{
mod.N_PRINT_ORDER = 5;
}
else if (mod_character.C_NAME == "Al")//检测是否添加‘碳硅锰磷硫’
{
mod.N_PRINT_ORDER = 6;
}
//mod.C_TYPE = "成分";
string strTypeName = bll_CheckType.Get_Type_Name(mod_character.C_TYPE_ID);
mod.C_TYPE = strTypeName;
mod.C_EMP_ID = RV.UI.UserInfo.UserID;
if (bll_Design_Item.Add(mod))
{
GetDesignLog_Add();
}
NewMethod_CF();// 查询执行标准 成分
MessageBox.Show("添加成功！");
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
/// <summary>
/// 得到一个对象实体
/// </summary>
public Mod_TQB_DESIGN_ITEM GetModel(string c_design_no, string c_character_id)
{
StringBuilder strSql = new StringBuilder();
strSql.Append("select C_ID,C_DESIGN_ID,C_CHARACTER_ID,C_TARGET_MIN,C_TARGET_INTERVAL,C_TARGET_MAX,C_PREWARNING_VALUE,C_TYPE,C_IS_DECIDE,C_IS_PRINT,N_PRINT_ORDER,N_SPEC_MIN,C_SPEC_INTERVAL,N_SPEC_MAX,C_FORMULA,C_UNIT,N_DIGIT,C_QUANTITATIVE,C_TEST_TEM,C_TEST_CONDITION,N_STATUS,C_REMARK,C_EMP_ID,D_MOD_DT from TQB_DESIGN_ITEM t ");
strSql.Append(" where substr(t.c_design_id,3)='" + c_design_no + "' and t.c_character_id='" + c_character_id + "' and rownum=1 ");
Mod_TQB_DESIGN_ITEM model = new Mod_TQB_DESIGN_ITEM();
DataSet ds = DbHelperOra.Query(strSql.ToString());
if (ds.Tables[0].Rows.Count > 0)
{
return(DataRowToModel(ds.Tables[0].Rows[0]));
}
else
{
return(null);
}
}
/// <summary>
/// 得到一个对象实体
/// </summary>
public Mod_TQB_DESIGN_ITEM GetModel(string C_ID)
{
StringBuilder strSql = new StringBuilder();
strSql.Append("select C_ID,C_DESIGN_ID,C_CHARACTER_ID,C_TARGET_MIN,C_TARGET_INTERVAL,C_TARGET_MAX,C_PREWARNING_VALUE,C_TYPE,C_IS_DECIDE,C_IS_PRINT,N_PRINT_ORDER,N_SPEC_MIN,C_SPEC_INTERVAL,N_SPEC_MAX,C_FORMULA,C_UNIT,N_DIGIT,C_QUANTITATIVE,C_TEST_TEM,C_TEST_CONDITION,N_STATUS,C_REMARK,C_EMP_ID,D_MOD_DT from TQB_DESIGN_ITEM ");
strSql.Append(" where C_ID=:C_ID ");
OracleParameter[] parameters =
{
new OracleParameter(":C_ID", OracleDbType.Varchar2, 100)
};
parameters[0].Value = C_ID;
Mod_TQB_DESIGN_ITEM model = new Mod_TQB_DESIGN_ITEM();
DataSet ds = DbHelperOra.Query(strSql.ToString(), parameters);
if (ds.Tables[0].Rows.Count > 0)
{
return(DataRowToModel(ds.Tables[0].Rows[0]));
}
else
{
return(null);
}
}
/// <summary>
/// 修改
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btn_Update_CF_Click(object sender, EventArgs e)
{
try
{
for (int i = 0; i < gv_StdCF.DataRowCount; i++)
{
DataRow dr = this.gv_StdCF.GetDataRow(i);
if (dr == null)
{
return;
}
Mod_TQB_DESIGN_ITEM mod = bll_Design_Item.GetModel(dr["C_ID"].ToString());
#region 目标值区间
if (!string.IsNullOrEmpty(dr["C_TARGET_INTERVAL"].ToString()))
{
mod.C_TARGET_INTERVAL = dr["C_TARGET_INTERVAL"].ToString();
if (dr["C_TARGET_INTERVAL"].ToString() == "≤E")
{
if (string.IsNullOrEmpty(dr["C_TARGET_MIN"].ToString()))
{
MessageBox.Show("请填写目标最小值！");
return;
}
else
{
mod.C_TARGET_MIN = dr["C_TARGET_MIN"].ToString();//目标最小值
}
}
else if (dr["C_TARGET_INTERVAL"].ToString() == "≤E≤")
{
if (string.IsNullOrEmpty(dr["C_TARGET_MIN"].ToString()))
{
MessageBox.Show("请填写目标最小值！");
return;
}
if (string.IsNullOrEmpty(dr["C_TARGET_MAX"].ToString()))
{
MessageBox.Show("请填写目标最大值！");
return;
}
mod.C_TARGET_MIN = dr["C_TARGET_MIN"].ToString(); //目标最小值
mod.C_TARGET_MAX = dr["C_TARGET_MAX"].ToString(); //目标最大值
}
else if (dr["C_TARGET_INTERVAL"].ToString() == "E≤")
{
if (string.IsNullOrEmpty(dr["C_TARGET_MAX"].ToString()))
{
MessageBox.Show("请填写目标最大值！");
return;
}
else
{
mod.C_TARGET_MAX = dr["C_TARGET_MAX"].ToString();//目标最大值
}
}
}
#endregion
mod.C_PREWARNING_VALUE = dr["C_PREWARNING_VALUE"].ToString();
#region 规格区间
if (!string.IsNullOrEmpty(dr["C_SPEC_INTERVAL"].ToString()))
{
mod.C_SPEC_INTERVAL = dr["C_SPEC_INTERVAL"].ToString();
if (dr["C_SPEC_INTERVAL"].ToString() == "≤E")
{
if (string.IsNullOrEmpty(dr["N_SPEC_MIN"].ToString()))
{
MessageBox.Show("请填写规格最小值！");
return;
}
else
{
mod.N_SPEC_MIN = Convert.ToDecimal(dr["N_SPEC_MIN"]);//规格最小值
}
}
else if (dr["C_SPEC_INTERVAL"].ToString() == "≤E≤")
{
if (string.IsNullOrEmpty(dr["N_SPEC_MIN"].ToString()))
{
MessageBox.Show("请填写规格最小值！");
return;
}
if (string.IsNullOrEmpty(dr["N_SPEC_MAX"].ToString()))
{
MessageBox.Show("请填写规格最大值！");
return;
}
mod.N_SPEC_MIN = Convert.ToDecimal(dr["N_SPEC_MIN"]); //规格最小值
mod.N_SPEC_MAX = Convert.ToDecimal(dr["N_SPEC_MAX"]); //规格最大值
}
else if (dr["C_SPEC_INTERVAL"].ToString() == "E≤")
{
if (string.IsNullOrEmpty(dr["N_SPEC_MAX"].ToString()))
{
MessageBox.Show("请填写规格最大值！");
return;
}
else
{
mod.N_SPEC_MAX = Convert.ToDecimal(dr["N_SPEC_MAX"]);//规格最大值
}
}
}
#endregion
if (!string.IsNullOrEmpty(dr["N_PRINT_ORDER"].ToString()))
{
mod.N_PRINT_ORDER = Convert.ToDecimal(dr["N_PRINT_ORDER"]);
}
mod.C_QUANTITATIVE = dr["C_QUANTITATIVE"].ToString();
mod.C_FORMULA = dr["C_FORMULA"].ToString();
mod.C_UNIT = dr["C_UNIT"].ToString();
if (!string.IsNullOrEmpty(dr["N_DIGIT"].ToString()))
{
mod.N_DIGIT = Convert.ToDecimal(dr["N_DIGIT"]);
}
mod.C_IS_DECIDE = dr["C_IS_DECIDE"].ToString();
mod.C_IS_PRINT = dr["C_IS_PRINT"].ToString();
mod.C_TEST_TEM = dr["C_TEST_TEM"].ToString();
mod.C_TEST_CONDITION = dr["C_TEST_CONDITION"].ToString();
mod.C_REMARK = dr["C_REMARK"].ToString();
mod.C_EMP_ID = RV.UI.UserInfo.UserID;
mod.D_MOD_DT = RV.UI.ServerTime.timeNow();
if (bll_Design_Item.Update(mod))
{
GetDesignLog_Add();
}
}
NewMethod_CF();// 查询执行标准 成分
MessageBox.Show("修改成功！");
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
/// <summary>
/// 增加一条数据
/// </summary>
public bool Add(Mod_TQB_DESIGN_ITEM model)
{
StringBuilder strSql = new StringBuilder();
strSql.Append("insert into TQB_DESIGN_ITEM(");
strSql.Append("C_DESIGN_ID,C_CHARACTER_ID,C_TARGET_MIN,C_TARGET_INTERVAL,C_TARGET_MAX,C_PREWARNING_VALUE,C_TYPE,C_IS_DECIDE,C_IS_PRINT,N_PRINT_ORDER,N_SPEC_MIN,C_SPEC_INTERVAL,N_SPEC_MAX,C_FORMULA,C_UNIT,N_DIGIT,C_QUANTITATIVE,C_TEST_TEM,C_TEST_CONDITION,N_STATUS,C_REMARK,C_EMP_ID,D_MOD_DT)");
strSql.Append(" values (");
strSql.Append(":C_DESIGN_ID,:C_CHARACTER_ID,:C_TARGET_MIN,:C_TARGET_INTERVAL,:C_TARGET_MAX,:C_PREWARNING_VALUE,:C_TYPE,:C_IS_DECIDE,:C_IS_PRINT,:N_PRINT_ORDER,:N_SPEC_MIN,:C_SPEC_INTERVAL,:N_SPEC_MAX,:C_FORMULA,:C_UNIT,:N_DIGIT,:C_QUANTITATIVE,:C_TEST_TEM,:C_TEST_CONDITION,:N_STATUS,:C_REMARK,:C_EMP_ID,:D_MOD_DT)");
OracleParameter[] parameters =
{
new OracleParameter(":C_DESIGN_ID", OracleDbType.Varchar2, 100),
new OracleParameter(":C_CHARACTER_ID", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TARGET_MIN", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TARGET_INTERVAL", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TARGET_MAX", OracleDbType.Varchar2, 100),
new OracleParameter(":C_PREWARNING_VALUE", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TYPE", OracleDbType.Varchar2, 100),
new OracleParameter(":C_IS_DECIDE", OracleDbType.Varchar2, 100),
new OracleParameter(":C_IS_PRINT", OracleDbType.Varchar2, 100),
new OracleParameter(":N_PRINT_ORDER", OracleDbType.Decimal, 5),
new OracleParameter(":N_SPEC_MIN", OracleDbType.Decimal, 15),
new OracleParameter(":C_SPEC_INTERVAL", OracleDbType.Varchar2, 100),
new OracleParameter(":N_SPEC_MAX", OracleDbType.Decimal, 15),
new OracleParameter(":C_FORMULA", OracleDbType.Varchar2, 100),
new OracleParameter(":C_UNIT", OracleDbType.Varchar2, 100),
new OracleParameter(":N_DIGIT", OracleDbType.Decimal, 1),
new OracleParameter(":C_QUANTITATIVE", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TEST_TEM", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TEST_CONDITION", OracleDbType.Varchar2, 100),
new OracleParameter(":N_STATUS", OracleDbType.Decimal, 1),
new OracleParameter(":C_REMARK", OracleDbType.Varchar2, 500),
new OracleParameter(":C_EMP_ID", OracleDbType.Varchar2, 100),
new OracleParameter(":D_MOD_DT", OracleDbType.Date)
};
parameters[0].Value = model.C_DESIGN_ID;
parameters[1].Value = model.C_CHARACTER_ID;
parameters[2].Value = model.C_TARGET_MIN;
parameters[3].Value = model.C_TARGET_INTERVAL;
parameters[4].Value = model.C_TARGET_MAX;
parameters[5].Value = model.C_PREWARNING_VALUE;
parameters[6].Value = model.C_TYPE;
parameters[7].Value = model.C_IS_DECIDE;
parameters[8].Value = model.C_IS_PRINT;
parameters[9].Value = model.N_PRINT_ORDER;
parameters[10].Value = model.N_SPEC_MIN;
parameters[11].Value = model.C_SPEC_INTERVAL;
parameters[12].Value = model.N_SPEC_MAX;
parameters[13].Value = model.C_FORMULA;
parameters[14].Value = model.C_UNIT;
parameters[15].Value = model.N_DIGIT;
parameters[16].Value = model.C_QUANTITATIVE;
parameters[17].Value = model.C_TEST_TEM;
parameters[18].Value = model.C_TEST_CONDITION;
parameters[19].Value = model.N_STATUS;
parameters[20].Value = model.C_REMARK;
parameters[21].Value = model.C_EMP_ID;
parameters[22].Value = model.D_MOD_DT;
int rows = DbHelperOra.ExecuteSql(strSql.ToString(), parameters);
if (rows > 0)
{
return(true);
}
else
{
return(false);
}
}
/// <summary>
/// 得到一个对象实体
/// </summary>
public Mod_TQB_DESIGN_ITEM DataRowToModel(DataRow row)
{
Mod_TQB_DESIGN_ITEM model = new Mod_TQB_DESIGN_ITEM();
if (row != null)
{
if (row["C_ID"] != null)
{
model.C_ID = row["C_ID"].ToString();
}
if (row["C_DESIGN_ID"] != null)
{
model.C_DESIGN_ID = row["C_DESIGN_ID"].ToString();
}
if (row["C_CHARACTER_ID"] != null)
{
model.C_CHARACTER_ID = row["C_CHARACTER_ID"].ToString();
}
if (row["C_TARGET_MIN"] != null)
{
model.C_TARGET_MIN = row["C_TARGET_MIN"].ToString();
}
if (row["C_TARGET_INTERVAL"] != null)
{
model.C_TARGET_INTERVAL = row["C_TARGET_INTERVAL"].ToString();
}
if (row["C_TARGET_MAX"] != null)
{
model.C_TARGET_MAX = row["C_TARGET_MAX"].ToString();
}
if (row["C_PREWARNING_VALUE"] != null)
{
model.C_PREWARNING_VALUE = row["C_PREWARNING_VALUE"].ToString();
}
if (row["C_TYPE"] != null)
{
model.C_TYPE = row["C_TYPE"].ToString();
}
if (row["C_IS_DECIDE"] != null)
{
model.C_IS_DECIDE = row["C_IS_DECIDE"].ToString();
}
if (row["C_IS_PRINT"] != null)
{
model.C_IS_PRINT = row["C_IS_PRINT"].ToString();
}
if (row["N_PRINT_ORDER"] != null && row["N_PRINT_ORDER"].ToString() != "")
{
model.N_PRINT_ORDER = decimal.Parse(row["N_PRINT_ORDER"].ToString());
}
if (row["N_SPEC_MIN"] != null && row["N_SPEC_MIN"].ToString() != "")
{
model.N_SPEC_MIN = decimal.Parse(row["N_SPEC_MIN"].ToString());
}
if (row["C_SPEC_INTERVAL"] != null)
{
model.C_SPEC_INTERVAL = row["C_SPEC_INTERVAL"].ToString();
}
if (row["N_SPEC_MAX"] != null && row["N_SPEC_MAX"].ToString() != "")
{
model.N_SPEC_MAX = decimal.Parse(row["N_SPEC_MAX"].ToString());
}
if (row["C_FORMULA"] != null)
{
model.C_FORMULA = row["C_FORMULA"].ToString();
}
if (row["C_UNIT"] != null)
{
model.C_UNIT = row["C_UNIT"].ToString();
}
if (row["N_DIGIT"] != null && row["N_DIGIT"].ToString() != "")
{
model.N_DIGIT = decimal.Parse(row["N_DIGIT"].ToString());
}
if (row["C_QUANTITATIVE"] != null)
{
model.C_QUANTITATIVE = row["C_QUANTITATIVE"].ToString();
}
if (row["C_TEST_TEM"] != null)
{
model.C_TEST_TEM = row["C_TEST_TEM"].ToString();
}
if (row["C_TEST_CONDITION"] != null)
{
model.C_TEST_CONDITION = row["C_TEST_CONDITION"].ToString();
}
if (row["N_STATUS"] != null && row["N_STATUS"].ToString() != "")
{
model.N_STATUS = decimal.Parse(row["N_STATUS"].ToString());
}
if (row["C_REMARK"] != null)
{
model.C_REMARK = row["C_REMARK"].ToString();
}
if (row["C_EMP_ID"] != null)
{
model.C_EMP_ID = row["C_EMP_ID"].ToString();
}
if (row["D_MOD_DT"] != null && row["D_MOD_DT"].ToString() != "")
{
model.D_MOD_DT = DateTime.Parse(row["D_MOD_DT"].ToString());
}
}
return(model);
}
/// <summary>
/// 更新一条数据
/// </summary>
public bool Update(Mod_TQB_DESIGN_ITEM model)
{
StringBuilder strSql = new StringBuilder();
strSql.Append("update TQB_DESIGN_ITEM set ");
strSql.Append("C_DESIGN_ID=:C_DESIGN_ID,");
strSql.Append("C_CHARACTER_ID=:C_CHARACTER_ID,");
strSql.Append("C_TARGET_MIN=:C_TARGET_MIN,");
strSql.Append("C_TARGET_INTERVAL=:C_TARGET_INTERVAL,");
strSql.Append("C_TARGET_MAX=:C_TARGET_MAX,");
strSql.Append("C_PREWARNING_VALUE=:C_PREWARNING_VALUE,");
strSql.Append("C_TYPE=:C_TYPE,");
strSql.Append("C_IS_DECIDE=:C_IS_DECIDE,");
strSql.Append("C_IS_PRINT=:C_IS_PRINT,");
strSql.Append("N_PRINT_ORDER=:N_PRINT_ORDER,");
strSql.Append("N_SPEC_MIN=:N_SPEC_MIN,");
strSql.Append("C_SPEC_INTERVAL=:C_SPEC_INTERVAL,");
strSql.Append("N_SPEC_MAX=:N_SPEC_MAX,");
strSql.Append("C_FORMULA=:C_FORMULA,");
strSql.Append("C_UNIT=:C_UNIT,");
strSql.Append("N_DIGIT=:N_DIGIT,");
strSql.Append("C_QUANTITATIVE=:C_QUANTITATIVE,");
strSql.Append("C_TEST_TEM=:C_TEST_TEM,");
strSql.Append("C_TEST_CONDITION=:C_TEST_CONDITION,");
strSql.Append("N_STATUS=:N_STATUS,");
strSql.Append("C_REMARK=:C_REMARK,");
strSql.Append("C_EMP_ID=:C_EMP_ID,");
strSql.Append("D_MOD_DT=:D_MOD_DT");
strSql.Append(" where C_ID=:C_ID ");
OracleParameter[] parameters =
{
new OracleParameter(":C_DESIGN_ID", OracleDbType.Varchar2, 100),
new OracleParameter(":C_CHARACTER_ID", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TARGET_MIN", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TARGET_INTERVAL", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TARGET_MAX", OracleDbType.Varchar2, 100),
new OracleParameter(":C_PREWARNING_VALUE", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TYPE", OracleDbType.Varchar2, 100),
new OracleParameter(":C_IS_DECIDE", OracleDbType.Varchar2, 100),
new OracleParameter(":C_IS_PRINT", OracleDbType.Varchar2, 100),
new OracleParameter(":N_PRINT_ORDER", OracleDbType.Decimal, 5),
new OracleParameter(":N_SPEC_MIN", OracleDbType.Decimal, 15),
new OracleParameter(":C_SPEC_INTERVAL", OracleDbType.Varchar2, 100),
new OracleParameter(":N_SPEC_MAX", OracleDbType.Decimal, 15),
new OracleParameter(":C_FORMULA", OracleDbType.Varchar2, 100),
new OracleParameter(":C_UNIT", OracleDbType.Varchar2, 100),
new OracleParameter(":N_DIGIT", OracleDbType.Decimal, 1),
new OracleParameter(":C_QUANTITATIVE", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TEST_TEM", OracleDbType.Varchar2, 100),
new OracleParameter(":C_TEST_CONDITION", OracleDbType.Varchar2, 100),
new OracleParameter(":N_STATUS", OracleDbType.Decimal, 1),
new OracleParameter(":C_REMARK", OracleDbType.Varchar2, 500),
new OracleParameter(":C_EMP_ID", OracleDbType.Varchar2, 100),
new OracleParameter(":D_MOD_DT", OracleDbType.Date),
new OracleParameter(":C_ID", OracleDbType.Varchar2, 100)
};
parameters[0].Value = model.C_DESIGN_ID;
parameters[1].Value = model.C_CHARACTER_ID;
parameters[2].Value = model.C_TARGET_MIN;
parameters[3].Value = model.C_TARGET_INTERVAL;
parameters[4].Value = model.C_TARGET_MAX;
parameters[5].Value = model.C_PREWARNING_VALUE;
parameters[6].Value = model.C_TYPE;
parameters[7].Value = model.C_IS_DECIDE;
parameters[8].Value = model.C_IS_PRINT;
parameters[9].Value = model.N_PRINT_ORDER;
parameters[10].Value = model.N_SPEC_MIN;
parameters[11].Value = model.C_SPEC_INTERVAL;
parameters[12].Value = model.N_SPEC_MAX;
parameters[13].Value = model.C_FORMULA;
parameters[14].Value = model.C_UNIT;
parameters[15].Value = model.N_DIGIT;
parameters[16].Value = model.C_QUANTITATIVE;
parameters[17].Value = model.C_TEST_TEM;
parameters[18].Value = model.C_TEST_CONDITION;
parameters[19].Value = model.N_STATUS;
parameters[20].Value = model.C_REMARK;
parameters[21].Value = model.C_EMP_ID;
parameters[22].Value = model.D_MOD_DT;
parameters[23].Value = model.C_ID;
int rows = TransactionHelper.ExecuteSql(strSql.ToString(), parameters);
if (rows > 0)
{
return(true);
}
else
{
return(false);
}
}
/// <summary>
/// 更新一条数据
/// </summary>
public bool Update(Mod_TQB_DESIGN_ITEM model)
{
return(dal.Update(model));
}
/// <summary>
/// 增加一条数据
/// </summary>
public bool Add(Mod_TQB_DESIGN_ITEM model)
{
return(dal.Add(model));
}