private void button1_Click(object sender, EventArgs e)
{
DRAFTINGITF.DrawingDocument DrwDoc = null;
DRAFTINGITF.DrawingView DrwView = null;
try
{
DrwDoc = (DRAFTINGITF.DrawingDocument)catia.ActiveDocument;
}
catch (Exception)
{
MessageBox.Show("please open a DrawingDocument");
return;
}
DRAFTINGITF.DrawingRoot DrwRoot = DrwDoc.DrawingRoot;
try
{
DrwView = DrwRoot.ActiveSheet.Views.Item(DrwRoot.ActiveSheet.Views.Count);
}
catch (Exception)
{
MessageBox.Show("sheet가 없습니다.");
return;
}
DRAFTINGITF.DrawingViewGenerativeBehavior DrwGenBeh = DrwView.GenerativeBehavior;
double X1, Y1, Z1, X2, Y2, Z2;
DrwGenBeh.GetProjectionPlane(out X1, out Y1, out Z1, out X2, out Y2, out Z2);
ProductStructureTypeLib.Product Prd = (ProductStructureTypeLib.Product)DrwGenBeh.Document;
MECMOD.PartDocument PrtDoc = (MECMOD.PartDocument)Prd.ReferenceProduct.Parent;
MECMOD.Part Prt = PrtDoc.Part;
MECMOD.Body Bdy = Prt.MainBody;
MECMOD.Shapes Shps = Bdy.Shapes;
PARTITF.Hole tHole = (PARTITF.Hole)Shps.GetItem("Hole.1");
object[] opt = new object[3];
tHole.GetOrigin(opt);
//radiuse
//tHole.
//3D 위치 값
// double X = -37.935, Y = 96.8, Z = 104.207;
double X = (double)opt[0];
double Y = (double)opt[1];
double Z = (double)opt[2];
//결과 값
double COS_ALPHA = 0, VW_H = 0, VW_V = 0;
//계산과정
COS_ALPHA = (X * X1 + Y * Y1 + Z * Z1) / ((Math.Pow(X1, 2) + Math.Pow(Y1, 2) + Math.Pow(Z1, 2)) * Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)));
VW_H = Math.Sqrt(X * X + Y * Y + Z * Z) * COS_ALPHA;
COS_ALPHA = (X * X2 + Y * Y2 + Z * Z2) / ((Math.Pow(X2, 2) + Math.Pow(Y2, 2) + Math.Pow(Z2, 2)) * Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)));
VW_V = Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)) * COS_ALPHA;
//create the point
MECMOD.Factory2D fac = DrwView.Factory2D;
fac.CreatePoint(VW_H, VW_V);
//add a text (20정도 뛰어보자)
DRAFTINGITF.DrawingText txt = DrwView.Texts.Add("Hole( " + (int)X + " , " + (int)Y + " , " + (int)Z + " )", VW_H + 20, VW_V - 20);
// DRAFTINGITF.DrawingText txt = DrwView.Texts.Add(("( {0} , {1} , {2} )"X,Y,Z), VW_H + 20, VW_V - 20);
txt.SetFontSize(0, 0, 12);
DRAFTINGITF.DrawingLeader FDleadr = txt.Leaders.Add(VW_H, VW_V);
//update the drawing document.
DrwDoc.Update();
}
private void button4_Click(object sender, EventArgs e)
{
if (catia == null)
{
MessageBox.Show("Please run CATIA");
return;
}
try
{
drwDoc = (DRAFTINGITF.DrawingDocument)catia.ActiveDocument;
}
catch (Exception)
{
MessageBox.Show("please open a document.");
return;
}
DRAFTINGITF.DrawingRoot DrwRoot = drwDoc.DrawingRoot;
try
{
DrwView = DrwRoot.ActiveSheet.Views.Item(DrwRoot.ActiveSheet.Views.Count);
}
catch (Exception)
{
MessageBox.Show("sheet가 없습니다.");
return;
}
DRAFTINGITF.DrawingViewGenerativeBehavior DrwGenBeh = DrwView.GenerativeBehavior;
////7.point txt, leader생성
//CreateTxt(DrwGenBeh, pt1, DrwView);
//CreateTxt(DrwGenBeh, pt2, DrwView);
//CreateTxt(DrwGenBeh, pt3, DrwView);
double X1, Y1, Z1, X2, Y2, Z2;
DrwGenBeh.GetProjectionPlane(out X1, out Y1, out Z1, out X2, out Y2, out Z2);
//MECMOD.Body Bdy = Prt.MainBody;
//MECMOD.Shapes Shps = Bdy.Shapes;
//7.point txt, leader생성
// CreateTxt(DrwGenBeh, X1, Y1, Z1, X2, Y2, Z2, pt1, DrwView);
// CreateTxt(X1, Y1, Z1, X2, Y2, Z2, pt2, DrwView);
// CreateTxt(X1, Y1, Z1, X2, Y2, Z2, pt3, DrwView);
object[] ap1 = new object[3];
object[] ap2 = new object[3];
object[] ap3 = new object[3];
pt1.GetCoordinates(ap1);
pt2.GetCoordinates(ap2);
pt3.GetCoordinates(ap3);
//pt1---
double X = (double)ap1[0];
double Y = (double)ap1[1];
double Z = (double)ap1[2];
double COS_ALPHA = 0, VW_H = 0, VW_V = 0;
/*
* COS_ALPHA = (X * X1 + Y * Y1 + Z * Z1) / ((Math.Pow(X1, 2) + Math.Pow(Y1, 2) + Math.Pow(Z1, 2)) * Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)));
* VW_H = Math.Sqrt(X * X + Y * Y + Z * Z) * COS_ALPHA;
*
* COS_ALPHA = (X * X2 + Y * Y2 + Z * Z2) / ((Math.Pow(X2, 2) + Math.Pow(Y2, 2) + Math.Pow(Z2, 2)) * Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)));
* VW_V = Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)) * COS_ALPHA;
*/
MECMOD.Factory2D fac = DrwView.Factory2D;
VW_H = 0;
VW_V = 0;
fac.CreatePoint(VW_H, VW_V);
DRAFTINGITF.DrawingText txt = DrwView.Texts.Add(pt1.get_Name() + "( " + (int)X + " , " + (int)Y + " , " + (int)Z + " )", VW_H + 20, VW_V - 20);
txt.SetFontSize(0, 0, 12);
DRAFTINGITF.DrawingLeader FDleadr = txt.Leaders.Add(VW_H, VW_V);
//pt2---
X = (double)ap2[0];
Y = (double)ap2[1];
Z = (double)ap2[2];
COS_ALPHA = (X * X1 + Y * Y1 + Z * Z1) / ((Math.Pow(X1, 2) + Math.Pow(Y1, 2) + Math.Pow(Z1, 2)) * Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)));
VW_H = Math.Sqrt(X * X + Y * Y + Z * Z) * COS_ALPHA;
COS_ALPHA = (X * X2 + Y * Y2 + Z * Z2) / ((Math.Pow(X2, 2) + Math.Pow(Y2, 2) + Math.Pow(Z2, 2)) * Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)));
VW_V = Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)) * COS_ALPHA;
fac = DrwView.Factory2D;
fac.CreatePoint(VW_H, VW_V);
txt = DrwView.Texts.Add(pt2.get_Name() + "( " + (int)X + " , " + (int)Y + " , " + (int)Z + " )", VW_H + 20, VW_V - 20);
txt.SetFontSize(0, 0, 12);
FDleadr = txt.Leaders.Add(VW_H, VW_V);
//pt3---
X = (double)ap3[0];
Y = (double)ap3[1];
Z = (double)ap3[2];
COS_ALPHA = (X * X1 + Y * Y1 + Z * Z1) / ((Math.Pow(X1, 2) + Math.Pow(Y1, 2) + Math.Pow(Z1, 2)) * Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)));
VW_H = Math.Sqrt(X * X + Y * Y + Z * Z) * COS_ALPHA;
COS_ALPHA = (X * X2 + Y * Y2 + Z * Z2) / ((Math.Pow(X2, 2) + Math.Pow(Y2, 2) + Math.Pow(Z2, 2)) * Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)));
VW_V = Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)) * COS_ALPHA;
fac = DrwView.Factory2D;
fac.CreatePoint(VW_H, VW_V);
txt = DrwView.Texts.Add(pt3.get_Name() + "( " + (int)X + " , " + (int)Y + " , " + (int)Z + " )", VW_H + 20, VW_V - 20);
txt.SetFontSize(0, 0, 12);
FDleadr = txt.Leaders.Add(VW_H, VW_V);
//pt_A----
ProductStructureTypeLib.Product Prd = (ProductStructureTypeLib.Product)DrwGenBeh.Document;
MECMOD.PartDocument PrtDoc = (MECMOD.PartDocument)Prd.ReferenceProduct.Parent;
MECMOD.Part Prt = PrtDoc.Part;
MECMOD.HybridBody bs = Prt.HybridBodies.Item("forTestGS").HybridBodies.Item("Base");
HybridShapeTypeLib.Point ptA = (HybridShapeTypeLib.Point)bs.HybridShapes.GetItem("PT-A");
object[] aa = new object[3];
ptA.GetCoordinates(aa);
X = (double)aa[0];
Y = (double)aa[1];
Z = (double)aa[2];
COS_ALPHA = (X * X1 + Y * Y1 + Z * Z1) / ((Math.Pow(X1, 2) + Math.Pow(Y1, 2) + Math.Pow(Z1, 2)) * Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)));
VW_H = Math.Sqrt(X * X + Y * Y + Z * Z) * COS_ALPHA;
COS_ALPHA = (X * X2 + Y * Y2 + Z * Z2) / ((Math.Pow(X2, 2) + Math.Pow(Y2, 2) + Math.Pow(Z2, 2)) * Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)));
VW_V = Math.Sqrt(Math.Pow(X, 2) + Math.Pow(Y, 2) + Math.Pow(Z, 2)) * COS_ALPHA;
fac = DrwView.Factory2D;
fac.CreatePoint(VW_H, VW_V);
txt = DrwView.Texts.Add(ptA.get_Name() + "( " + (int)X + " , " + (int)Y + " , " + (int)Z + " )", VW_H - 20, VW_V + 40);
txt.SetFontSize(0, 0, 12);
FDleadr = txt.Leaders.Add(VW_H, VW_V);
//------
//table 생성
List <HybridShapeTypeLib.Point> list = new List <HybridShapeTypeLib.Point>();
list.Add(pt1);
list.Add(pt2);
list.Add(pt3);
int col = 4;
int row = 5;
DRAFTINGITF.DrawingTable table = DrwView.Tables.Add(200, 200, row, col, 36, 80);
table.SetCellString(1, 1, "Name");
table.SetCellString(1, 2, "X");
table.SetCellString(1, 3, "Y");
table.SetCellString(1, 4, "Z");
int ii = 2;
foreach (HybridShapeTypeLib.Point p in list)
{
object[] ap = new object[3];
p.GetCoordinates(ap);
table.SetCellString(ii, 1, p.get_Name());
table.SetCellString(ii, 2, ap[0] + "");
table.SetCellString(ii, 3, ap[1] + "");
table.SetCellString(ii, 4, ap[2] + "");
ii++;
}
table.SetCellString(5, 1, ptA.get_Name());
table.SetCellString(5, 2, aa[0] + "");
table.SetCellString(5, 3, aa[1] + "");
table.SetCellString(5, 4, aa[2] + "");
//table txt stayle 변경---
for (int i = 1; i <= row; i++)
{
for (int j = 1; j <= col; j++)
{
table.GetCellObject(i, j).SetFontSize(0, 0, 14);
table.GetCellObject(i, j).TextProperties.Justification = CatJustification.catCenter;
}
}
drwDoc.Update();
//8.save the 도면 파일
drwDoc.Save();
}