private void btnAdd_Click(object sender, EventArgs e)
{
// various validation
// if OK, pass info back to the parent and close
// if not ok wait for them to fix the issues
if (Validator.IsPresent(txtCustName, "Customer Name") &&
Validator.CSVFriendly(txtCustName, "Customer Name") &&
Validator.IsNonNegativeInt32(txtCustAcct, "Account Number") &&
Validator.IsSelected(cmbCustType, "Customer Type"))
{
Object newCust;
switch (cmbCustType.SelectedIndex)
{
case 0:
newCust = new ResidentialCustomer(txtCustName.Text, Convert.ToInt32(txtCustAcct.Text));
break;
case 1:
newCust = new CommercialCustomer(txtCustName.Text, Convert.ToInt32(txtCustAcct.Text));
break;
case 2:
newCust = new IndustrialCustomer(txtCustName.Text, Convert.ToInt32(txtCustAcct.Text));
break;
default:
newCust = null;
break;
}
this.Tag = newCust;
this.Close();
}
}
public void CalculateChargeTest2()
{ // Test of normal input, kWh amount less than the base charges
IndustrialCustomer cust = new IndustrialCustomer("Test", 12345);
int kWh = 500;
int offkWh = 500;
decimal expectedCharge = 116m;
decimal actualCharge;
actualCharge = cust.CalculateCharge(kWh, offkWh);
Assert.AreEqual(expectedCharge, actualCharge);
}
public void CalculateChargeBothBelowBaseTest()
{
// Arrange
int phUsage = 100, opUsage = 100;
double expectedCharge = 116;
double actualCharge;
// Act
actualCharge = IndustrialCustomer.CalculateCharge(phUsage, opUsage);
// Assert
Assert.AreEqual(expectedCharge, actualCharge);
}
// testing that zero value is being added for KWH2 for industrial calculations
public void IndustrialKWH2ZeroValue()
{
int acctnum = 1111;
string custName = "John Doe";
char custType = 'R';
decimal expectedkwh2value = 0;
decimal kwhvalue = 1500;
decimal kwhvalue2 = 0;
Customer calc = new IndustrialCustomer(acctnum, custName, custType, kwhvalue, kwhvalue2);
Assert.AreEqual(expectedkwh2value, kwhvalue2);
}
public void CalculateOffPeakChargeOver1000Amount()
{
//arrange
decimal offPeakBase = 40m;
decimal unitRate = 0.028m;
decimal energyUsed = 1010;
decimal expectedCharge = 40.28m;
decimal actualCharge = 0;
IndustrialCustomer industrialCustomer = new IndustrialCustomer(1, "john", "I", actualCharge);
//act
actualCharge = industrialCustomer.CalculateCharge(offPeakBase, unitRate, energyUsed);
//assert
Assert.AreEqual(expectedCharge, actualCharge);
}
public void CalculatePeakZeroAmount()
{
//arrange
decimal peakBase = 76m;
decimal unitRate = 0.065m;
decimal energyUsed = 0;
decimal expectedCharge = 76m;
decimal actualCharge = 0;
IndustrialCustomer industrialCustomer = new IndustrialCustomer(1, "john", "I", actualCharge);
//act
actualCharge = industrialCustomer.CalculateCharge(peakBase, unitRate, energyUsed);
//assert
Assert.AreEqual(expectedCharge, actualCharge);
}
public void IndustrialCustomerTestCheckForInvalidArgument()
{
//Arrange
int number = 1234;
string name = "Kingsley";
string type = "R";
IndustrialCustomer c = new IndustrialCustomer(number, name, type);
decimal peakKhwused = -30M;
decimal offPeakKwhused = 40;
//act
decimal billAmount = c.CalculateCharge(peakKhwused, offPeakKwhused);
//Assert
Assert.Fail();
}
// Calculate Button Clicked: do validation, do calculation based on user type, show result(s)
private void btnCalculate_Click(object sender, EventArgs e)
{
// if not industrial user (residential or commercial), after validation, extract input, do calculation, show result
if (!radIndustrial.Checked)
{
if (Validator.TBHasNonNegativeInt(txtUsage, "Usage"))
{ // validation passed, extract input
int usage = Convert.ToInt32(txtUsage.Text);
// if residential user, use residential method
if (radResidential.Checked)
{
totalAmt = ResidentialCustomer.CalculateCharge(usage);
}
// if commercial user, use commercial method
else if (radCommercial.Checked)
{
totalAmt = CommercialCustomer.CalculateCharge(usage);
}
// do output
txtTotal.Text = totalAmt.ToString("c");
txtUsage.SelectAll(); // select all for easy next entry
}
}
// if industrial user, after validation, extract inputs, do calculation, show results
else
{
if (Validator.TBHasNonNegativeInt(txtPeakUsage, "Peak Hour Usage") && Validator.TBHasNonNegativeInt(txtOPUsage, "Off Peak Usage"))
{ // validation passed, extract inputs
int peakUsage = Convert.ToInt32(txtPeakUsage.Text);
int opUsage = Convert.ToInt32(txtOPUsage.Text);
totalAmt = IndustrialCustomer.CalculateCharge(peakUsage, opUsage); // calculate use industrial method
// output peak & offpeak & total amount separately
grpForIndusAmt.Visible = true;
txtPeakCharge.Text = IndustrialCustomer.peakAmt.ToString("c");
txtOPCharge.Text = IndustrialCustomer.opAmt.ToString("c");
txtTotal.Text = totalAmt.ToString("c");
// select all text for easy next entry
txtPeakUsage.Focus();
txtPeakUsage.SelectAll();
}
}
}
public void IndustrialCustomerTestCheckForValidArgument()
{
//Arrange
int number = 1234;
string name = "Kingsley";
string type = "R";
IndustrialCustomer c = new IndustrialCustomer(number, name, type);
decimal peakKhwused = 30M;
decimal offPeakKwhused = 40;
//since input kwh hours for both peak and offpeak hours used is less than 1000. expected charge amount
//should be equal to the Flat rate
decimal flatRateforPeak = 76M;
decimal flatRateforOffPeak = 40M;
decimal totalFlatRate = flatRateforOffPeak + flatRateforPeak;
//act
decimal returnedChargeAmount = c.CalculateCharge(peakKhwused, offPeakKwhused);
//Assert
Assert.AreEqual(totalFlatRate, returnedChargeAmount);
}
//Adds customer to the listBox
private void btnAddCustomer_Click(object sender, EventArgs e)
{
//local variables
int accountNo = 0;
string customerName = "";
string customerType = "";
decimal chargeAmount;
Customer customer;
if (Validator.IsPresent(txtAccountNo, "Account No") && Validator.IsNonNegativeInt32(txtAccountNo, "Account No") &&
Validator.IsPresent(txtCustomerName, "Customer Name") &&
Validator.IsPresent(txtAmount, "Charge Amount"))
{
accountNo = Convert.ToInt32(txtAccountNo.Text);
customerName = txtCustomerName.Text;
chargeAmount = Convert.ToDecimal(txtAmount.Text.Remove(0, 1));
if (radResidential.Checked)
{
customerType = "R";
customer = new ResidentialCustomer(accountNo, customerName, customerType, chargeAmount);
}
else if (radCommercial.Checked)
{
customerType = "C";
customer = new CommercialCustomer(accountNo, customerName, customerType, chargeAmount);
}
else
{
customerType = "I";
customer = new IndustrialCustomer(accountNo, customerName, customerType, chargeAmount);
}
AddToList(customer);
DisplayCustomers();
Statistics();
}
}
// When calculate button is clicked
private void btnCalculate_Click(object sender, EventArgs e)
{
// local variables
decimal chargeAmount = 0;
int accountNo = 0;
string customerName = "";
//inistializes new customer;
Customer customer;
if (Validator.IsPresent(txtAccountNo, "Account No") && Validator.IsNonNegativeInt32(txtAccountNo, "Account No") &&
Validator.IsPresent(txtCustomerName, "Customer Name"))
{
accountNo = Convert.ToInt32(txtAccountNo.Text);
customerName = txtCustomerName.Text;
}
/* if residential or commercial customer type radio buttons are checked this if statement runs.
* Since residential and commercial both use the same energy used field, they are both wrapped in one if statement
* */
if (radResidential.Checked || radCommercial.Checked)
{
//validates if the field (Energy used) contains a value and then validates that the value is a positive whole number.
//takes the input from energy used textBox and stores it in a decimal variable
if (Validator.IsPresent(txtEnergy, "Energy Used") && Validator.IsNonNegativeInt32(txtEnergy, "Energy Used"))
{
decimal energyUsed = Convert.ToDecimal(txtEnergy.Text);
// when the residential customer type is selected
// calculates the amount charged by calling a method and passing in base rate, the energy units to charge and the rate per unit
if (radResidential.Checked)
{
customer = new ResidentialCustomer(accountNo, customerName, "R", chargeAmount);
chargeAmount = customer.CalculateCharge(RESIDENTIAL_BASE, RESIDENTIAL_UNIT_RATE, energyUsed);
}
// when commercial cusotmer type is selected
else if (radCommercial.Checked)
{
customer = new CommercialCustomer(accountNo, customerName, "C", chargeAmount);
chargeAmount = customer.CalculateCharge(COMMERCIAL_FLAT_RATE, COMMERCIAL_UNIT_RATE, energyUsed);
}
// displays the amount charged by calling display amount and passing in the amount calculated in previous steps
// which is then shown in the amount charge field
//displayAmount(chargeAmount);
}
}
/*
* When the industrial customer type is checked, this statement runs
* This is seperated from the top if condition because industrial used peak and off-peak hours energy used rather than total energy used.
*
*/
else if (radIndustrial.Checked)
{
// validates if peak hours and off peak hours fields have a value and that the value is a positive whole number.
if (Validator.IsPresent(txtPeakHours, "Peak Hours") && Validator.IsNonNegativeInt32(txtPeakHours, "Peak Hours") &&
Validator.IsPresent(txtOffPeakHours, "Off-Peak Hours") && Validator.IsNonNegativeInt32(txtOffPeakHours, "Off-Peak Hours"))
{
decimal peakHours = Convert.ToDecimal(txtPeakHours.Text); // stores peak hours input from txtpeakhours textbox in a decimal peakhours variable
decimal offPeakHours = Convert.ToDecimal(txtOffPeakHours.Text); // stores off-peak hours input from txtoffpeakhours textbox in a decimal offpeakhours variable
//initialize local peak and off-peak charge amount variables
decimal peakChargeAmount = 0; // variable to keep track of the peak energy used charge amount.
decimal offPeakChargeAmount = 0; // variable to keep track of the off- peak energy used charge amount
customer = new IndustrialCustomer(accountNo, customerName, "I", chargeAmount);
peakChargeAmount = customer.CalculateCharge(INDUSTRIAL_PEAK_FLAT_RATE, PEAK_UNIT_RATE, peakHours);
offPeakChargeAmount = customer.CalculateCharge(INDUSTRIAL_OFF_PEAK_FLAT_RATE, OFF_PEAK_UNIT_RATE, offPeakHours);
// the total charge amount for industrial customer is the sum of the peak hours and off peak hours charge amount.
chargeAmount = peakChargeAmount + offPeakChargeAmount;
}
}
// calls displayamount method and passess in the total charge amount to be displayed in the amount charge field.
displayAmount(chargeAmount);
}
private void BtnCalculate_Click(object sender, EventArgs e)
{ // create new customer type based on selection
switch (cboxCustType.SelectedIndex)
{
case 0: // residential
// set customer type
customerType = 'R';
this.ActiveControl = txtCustName;
if ( // validating customer name
Validator.IsNotEmpty(txtCustName, "Customer name") &&
// validating account number
Validator.IsNotEmpty(txtAcctNum, "Account number") &&
Validator.IsInteger(txtAcctNum, "Account number") &&
Validator.IsNonNegativeInt(txtAcctNum, "Account number") &&
// validating KWH Total
Validator.IsNotEmpty(txtKwhUsed, "kWh") &&
Validator.IsInteger(txtKwhUsed, "kWh") &&
Validator.IsNonNegativeInt(txtKwhUsed, "kWh"))
{
// set text values to customer variables
kwh1 = Convert.ToDecimal(txtKwhUsed.Text);
accountNo = Convert.ToInt32(txtAcctNum.Text);
customerName = Convert.ToString(txtCustName.Text);
// create new customer object
ResidentialCustomer newResCust = new ResidentialCustomer(accountNo, customerName, customerType, kwh1, kwh2 = 0);
myCustomers.Add(newResCust); // add to list
CustomerDB.SaveCustomers(myCustomers);
DisplayCustomers();
ClearFields();
}
break;
case 1: //commercial
// set customer type
customerType = 'C';
this.ActiveControl = txtCustName;
if ( // validating customer name
Validator.IsNotEmpty(txtCustName, "Customer name") &&
// validating account number
Validator.IsNotEmpty(txtAcctNum, "Account number") &&
Validator.IsInteger(txtAcctNum, "Account number") &&
Validator.IsNonNegativeInt(txtAcctNum, "Account number") &&
// validating KWH Total
Validator.IsNotEmpty(txtKwhUsed, "kWh") &&
Validator.IsInteger(txtKwhUsed, "kWh") &&
Validator.IsNonNegativeInt(txtKwhUsed, "kWh"))
{
// set text values to customer variables
kwh1 = Convert.ToDecimal(txtKwhUsed.Text);
accountNo = Convert.ToInt32(txtAcctNum.Text);
customerName = Convert.ToString(txtCustName.Text);
// create new customer object
CommercialCustomer newComCust = new CommercialCustomer(accountNo, customerName, customerType, kwh1, kwh2 = 0);
myCustomers.Add(newComCust); // add to list
CustomerDB.SaveCustomers(myCustomers);
DisplayCustomers();
ClearFields();
}
break;
case 2: // industrial
// set customer type
customerType = 'I';
this.ActiveControl = txtCustName;
if ( // validating customer name
Validator.IsNotEmpty(txtCustName, "Customer name") &&
// validating account number
Validator.IsNotEmpty(txtAcctNum, "Account number") &&
Validator.IsInteger(txtAcctNum, "Account number") &&
Validator.IsNonNegativeInt(txtAcctNum, "Account number") &&
// validation Peak Hours
Validator.IsNotEmpty(txtPeakHours, "Peak Hours") &&
Validator.IsInteger(txtPeakHours, "Peak Hours") &&
Validator.IsNonNegativeInt(txtPeakHours, "Peak Hours") &&
// validation Off-Peak Hours
Validator.IsNotEmpty(txtOffPeakHours, "Off-Peak Hours") &&
Validator.IsInteger(txtOffPeakHours, "Off-Peak Hours") &&
Validator.IsNonNegativeInt(txtOffPeakHours, "Off-Peak Hours"))
{
// set text values to customer variables
kwh1 = Convert.ToDecimal(txtPeakHours.Text);
kwh2 = Convert.ToDecimal(txtOffPeakHours.Text);
accountNo = Convert.ToInt32(txtAcctNum.Text);
customerName = Convert.ToString(txtCustName.Text);
// create new customer object
IndustrialCustomer newIndusCust = new IndustrialCustomer(accountNo, customerName, customerType, kwh1, kwh2);
myCustomers.Add(newIndusCust); // add to list
CustomerDB.SaveCustomers(myCustomers);
DisplayCustomers();
ClearFields();
}
break;
}
}