public void test()
{
RobotApplication appRSA = new RobotApplication();
getMaterialNameListRSA(appRSA);
getBarSectionNamesRSA(appRSA);
RobotStructure structureRSA = appRSA.Project.Structure;
RobotBarServer barsRSA = structureRSA.Bars;
RobotNodeServer nodesRSA = structureRSA.Nodes;
RobotObjObjectServer objRSA = structureRSA.Objects;
RobotLabelServer labelsRSA = appRSA.Project.Structure.Labels;
//Определение выборок выделенных в модели объектов
RobotSelection barSel = structureRSA.Selections.Get(IRobotObjectType.I_OT_BAR);
RobotSelection plateSel = structureRSA.Selections.Get(IRobotObjectType.I_OT_PANEL);
RobotSelection holesSel = structureRSA.Selections.Get(IRobotObjectType.I_OT_GEOMETRY);
RobotBarCollection barsMany = (RobotBarCollection)barsRSA.GetMany(barSel);
RobotObjObjectCollection platesMany = (RobotObjObjectCollection)objRSA.GetMany(plateSel);
IRobotBar barRSA = barsMany.Get(3);
IRobotObjObject plate = platesMany.Get(1);
IRobotLabel labelPlate = plate.GetLabel(IRobotLabelType.I_LT_PANEL_THICKNESS);
RobotGeoPoint3DCollection defPoints = (RobotGeoPoint3DCollection)plate.Main.DefPoints;
RobotGeoPoint3D pt1 = defPoints.Get(1);
RobotGeoPoint3D pt2 = defPoints.Get(2);
RobotGeoPoint3D pt3 = defPoints.Get(defPoints.Count);
//IRobotGeoContour geoContour=(IRobotGeoContour)plate.Main.Geometry;
//IRobotGeoObject geoObj=plate.Main.Geometry;
IRobotLabel labelBar = barRSA.GetLabel(IRobotLabelType.I_LT_BAR_SECTION);
RobotBarSectionData data = labelBar.Data;
RobotBarSectionConcreteData cData = data.Concrete;
double b = cData.GetValue(IRobotBarSectionConcreteDataValue.I_BSCDV_COL_B);
double h = cData.GetValue(IRobotBarSectionConcreteDataValue.I_BSCDV_COL_H);
double l1 = cData.GetValue(IRobotBarSectionConcreteDataValue.I_BSCDV_COL_L1);
double l2 = cData.GetValue(IRobotBarSectionConcreteDataValue.I_BSCDV_COL_L2);
double h1 = cData.GetValue(IRobotBarSectionConcreteDataValue.I_BSCDV_COL_H1);
double h2 = cData.GetValue(IRobotBarSectionConcreteDataValue.I_BSCDV_COL_H2);
double de = cData.GetValue(IRobotBarSectionConcreteDataValue.I_BSCDV_COL_DE);
double alfa = barRSA.Gamma;
}
/// <summary>
/// Add a new Panel entry to this mapping table
/// </summary>
/// <param name="element"></param>
/// <param name="obj"></param>
public void Add(PanelElement element, IRobotObjObject obj)
{
Add(PanelCategory, element.GUID, obj.Number.ToString());
}
private void CreatePlates(double liveLoad, List <int> forLiveLoads, double windLoad, List <int> forWindLoads, double buildingLoad,
List <int> forBuildingLoads, List <int> forDeadLoadsSlabs, IRobotSimpleCase ll, IRobotSimpleCase wl,
IRobotSimpleCase bl, double fatManLoad, IRobotSimpleCase dl, List <int> forDeadLoadsBars)
{
#region material info
//create the slab material
// string materialName = "Catia_material_slab";
// IRobotLabel Label = _structure.Labels.Create(IRobotLabelType.I_LT_MATERIAL, materialName);
// RobotMaterialData Material = Label.Data as RobotMaterialData;
// Material.Type = IRobotMaterialType.I_MT_CONCRETE;
// Material.E = 30000000000;
// Material.NU = 0.16;
// Material.RO = 25000;
// Material.Kirchoff = Material.E / (2*(1 + Material.NU));
// _project.Structure.Labels.Store(Label);
//create the panel type
string catSlabSectionName = "Catia_Slab";
IRobotLabel Label = _structure.Labels.Create(IRobotLabelType.I_LT_PANEL_THICKNESS, catSlabSectionName);
RobotThicknessData thickness = Label.Data as RobotThicknessData;
// thickness.MaterialName = materialName;
thickness.MaterialName = "CONCR";
thickness.ThicknessType = IRobotThicknessType.I_TT_HOMOGENEOUS;
RobotThicknessHomoData thicknessData = thickness.Data as RobotThicknessHomoData;
if (_plateInfo.Count != 0)
{
thicknessData.ThickConst = _plateInfo[0].Thickness / 1000; //test one panel for thickness
}
else
{
thicknessData.ThickConst = .02;
}
_project.Structure.Labels.Store(Label);
//create the panel material
// string materialName = "Catia_material_panel";
// Label = _structure.Labels.Create(IRobotLabelType.I_LT_MATERIAL, materialName);
// Material = Label.Data as RobotMaterialData;
// Material.Type = IRobotMaterialType.I_MT_CONCRETE;
// Material.Type = IRobotMaterialType.I_MT_ALUMINIUM;
// Material.E = 69000000000;
// Material.NU = 0.16; //the poisson ratio
// Material.RO = 25000; //the mass
// Material.Kirchoff = Material.E / (2*(1 + Material.NU));
// _project.Structure.Labels.Store(Label);
string catPanelSectionName = "Catia_Panel";
Label = _structure.Labels.Create(IRobotLabelType.I_LT_PANEL_THICKNESS, catPanelSectionName);
thickness = Label.Data as RobotThicknessData;
// thickness.MaterialName = materialName;
thickness.MaterialName = "ALUM";
thickness.ThicknessType = IRobotThicknessType.I_TT_HOMOGENEOUS;
thicknessData = thickness.Data as RobotThicknessHomoData;
thicknessData.ThickConst = 0.003175; //a 1/8" thick aluminum panel, we'll need to use a single finite element
_project.Structure.Labels.Store(Label);
string catShearPanelName = "Catia_Shear";
Label = _structure.Labels.Create(IRobotLabelType.I_LT_PANEL_THICKNESS, catShearPanelName);
thickness = Label.Data as RobotThicknessData;
thickness.MaterialName = "CONCR";
thickness.ThicknessType = IRobotThicknessType.I_TT_HOMOGENEOUS;
thicknessData = thickness.Data as RobotThicknessHomoData;
thicknessData.ThickConst = 0.3; //a 1/8" thick aluminum panel, we'll need to use a single finite element
_project.Structure.Labels.Store(Label);
#endregion
int plateId = 10000;
for (int i = 0; i < _plateInfo.Count; i++)
{
Console.WriteLine("Now creating plate " + plateId.ToString() + "...");
List <int> robotNodes = new List <int>();
var p = (AnalyticalPlate)_plateInfo[i]; //the plate to create
//at this point we know the CATIA nodes and the robot nodes
//but the robot node list for each plate is empty
//find the robot node that corresponds to each catia node in the list
//fill up the corresponding robot id list
//foreach (string catIndex in p.CatiaPoints)
//{
// foreach (Node n in _nodeInfo)
// {
// //if the node id equals that in the catia points list
// if (n.catiaID.Equals(catIndex))
// {
// robotNodes.Add(n.robotID); //add the int robot id to the other list
// }
// else
// {
// continue; //continue;
// }
// }
//}
p.Nodes = robotNodes; //change out the robotNodes list on the object
//the robot point array to hold all the pts
RobotPointsArray pts = new RobotPointsArrayClass();
pts.SetSize(p.Nodes.Count);
int ptIndex = 1;
//fill up the points array
foreach (int rId in p.Nodes)
{
IRobotNode robNode = _structure.Nodes.Get(rId) as IRobotNode;
pts.Set(ptIndex, robNode.X, robNode.Y, robNode.Z);
//MessageBox.Show(robNode.X.ToString());
ptIndex++;
}
//int plateId = _structure.Objects.FreeNumber;
_project.Structure.Objects.CreateContour(plateId, pts);
IRobotObjObject obj = _structure.Objects.Get(plateId) as IRobotObjObject;
obj.Main.Attribs.Meshed = 1;
if (p.PlateType == PlateType.Slab)
{
obj.SetLabel(IRobotLabelType.I_LT_PANEL_THICKNESS, catSlabSectionName);
obj.SetLabel(IRobotLabelType.I_LT_PANEL_REINFORCEMENT, "Panel");
}
else if (p.PlateType == PlateType.Panel)
{
obj.SetLabel(IRobotLabelType.I_LT_PANEL_THICKNESS, catPanelSectionName);
}
else if (p.PlateType == PlateType.Shear)
{
obj.SetLabel(IRobotLabelType.I_LT_PANEL_THICKNESS, catShearPanelName);
obj.SetLabel(IRobotLabelType.I_LT_PANEL_REINFORCEMENT, "Wall");
}
else
{
obj.SetLabel(IRobotLabelType.I_LT_PANEL_THICKNESS, catPanelSectionName);
}
obj.Initialize();
obj.Update();
//create some loads
//if the live load has a value
// if(p.PlateType == PlateType.slab)
if (p.LiveLoad > 0.0)
{
Console.WriteLine("Now creating live load on slab " + plateId.ToString() + "...");
liveLoad = p.LiveLoad;
forLiveLoads.Add(plateId);
}
//if the wind load has a value
// else if (p.PlateType == PlateType.panel)
if (p.WindLoad > 0.0)
{
Console.WriteLine("Now creating wind load on panel " + plateId.ToString() + "...");
windLoad = p.WindLoad;
forWindLoads.Add(plateId);
}
if (p.BuildingLoad > 0.0)
{
Console.WriteLine("Now creating building load on panel " + plateId.ToString() + "...");
buildingLoad = p.BuildingLoad;
forBuildingLoads.Add(plateId);
}
forDeadLoadsSlabs.Add(plateId); //all
p.Id = plateId; //set the plateId on the object
plateId++;
}
IRobotLoadRecord rec = null;
if (forLiveLoads.Count > 0)
{
//add the live loads on all panels
rec = ll.Records.Get(1);
rec.Objects.FromText(forLiveLoads[0].ToString() + "to" + forLiveLoads[forLiveLoads.Count - 1].ToString());
rec.SetValue(2, -liveLoad);
rec.SetValue(11, 0);
}
if (forWindLoads.Count > 0)
{
//add the forces on the wind panels
rec = wl.Records.Get(1);
rec.Objects.FromText(forWindLoads[0].ToString() + "to" + forWindLoads[forWindLoads.Count - 1].ToString());
rec.SetValue(0, _windx * windLoad); //the X value
rec.SetValue(1, _windy * windLoad); //the Y value
rec.SetValue(2, _windz * windLoad); // the Z value
// rec.SetValue(11, 1); //this sets it use the "local" normal for the wind direction
rec.SetValue(11, 0); //this is the default - loads act in the global direction
//add the uplift on the wind panels
// rec = wl_uplift.Records.Get(1);
// rec.Objects.FromText(forWindLoads[0].ToString() +"to"+forWindLoads[forWindLoads.Count-1].ToString());
// rec.SetValue(2, -windLoad);
// rec.SetValue(11,1);
}
if (forBuildingLoads.Count > 0)
{
rec = bl.Records.Get(1);
rec.Objects.FromText(forBuildingLoads[0].ToString() + "to" +
forBuildingLoads[forBuildingLoads.Count - 1].ToString());
rec.SetValue(2, -buildingLoad);
rec.SetValue(11, 0);
}
//create a randomly placed live load on the structure
//the fat man load
IRobotCollection nodes = _nodes.GetAll();
Random r = new Random();
int randPoint = r.Next((nodes.Get(1) as IRobotNode).Number, (nodes.Get(nodes.Count) as IRobotNode).Number);
// Debug.WriteLine(randPoint);
rec = ll.Records.Get(2);
rec.SetValue(2, -fatManLoad);
rec.Objects.FromText(randPoint.ToString());
//set the dead loads for the structure
rec = dl.Records.Get(1);
//add dead loads to bars
if (forDeadLoadsBars.Count > 0 && forDeadLoadsSlabs.Count == 0)
{
rec.Objects.FromText(forDeadLoadsBars[0].ToString() + "to" +
forDeadLoadsBars[forDeadLoadsBars.Count - 1].ToString());
}
//add dead loads to bars and slabs
else if (forDeadLoadsBars.Count > 0 && forDeadLoadsSlabs.Count > 0)
{
rec.Objects.FromText(forDeadLoadsBars[0].ToString() + "to" +
forDeadLoadsBars[forDeadLoadsBars.Count - 1].ToString() + " " +
forDeadLoadsSlabs[0].ToString() + "to" +
forDeadLoadsSlabs[forDeadLoadsSlabs.Count - 1].ToString());
}
//add dead loads to slabs only
else if (forDeadLoadsBars.Count == 0 && forDeadLoadsSlabs.Count > 0)
{
rec.Objects.FromText(forDeadLoadsSlabs[0].ToString() + "to" +
forDeadLoadsSlabs[forDeadLoadsSlabs.Count - 1].ToString());
}
rec.SetValue(2, -1); //set the z value
// Console.WriteLine("Waiting for load application...");
// System.Threading.Thread.Sleep(10000);
}
