/// <summary>
/// 更新多边形的某一点坐标
/// </summary>
/// <param name="oldLngLat">老坐标</param>
/// <param name="newLngLat">新坐标</param>
/// <returns></returns>
public bool UpdatePosition(Core.Model.MapLngLat oldLngLat, Core.Model.MapLngLat newLngLat)
{
Dosomething((Action)(delegate
{
IPoint oldPoint = new PointClass()
{
X = oldLngLat.Lng, Y = oldLngLat.Lat
};
IPoint newPoint = new PointClass()
{
X = newLngLat.Lng, Y = newLngLat.Lat
};
for (int i = 0; i < pointCollection.PointCount; i++)
{
if (pointCollection.get_Point(i).Compare(oldPoint) == 0)
{
pointCollection.RemovePoints(i, 1);
pointCollection.AddPoint(newPoint);
//坐标点集合
pointList.Remove(oldLngLat);
pointList.Add(newLngLat);
break;
}
}
base.Geometry = (IGeometry)pointCollection;
}), true);
Update();
return(true);
}
/// <summary>
/// 更新线位置
/// </summary>
/// <param name="pList"></param>
/// <returns></returns>
public bool UpdatePosition(List <Core.Model.MapLngLat> pList)
{
if (mapControl.InvokeRequired)
{
mapControl.Invoke((Action) delegate()
{
IPoint p = new PointClass();
pointCollection.RemovePoints(0, pointCollection.PointCount);
for (int i = 0; i < pList.Count; i++)
{
p.PutCoords(pList[i].Lng, pList[i].Lat);
pointCollection.AddPoint(p);
}
base.Geometry = pointCollection as IGeometry;
});
}
else
{
IPoint p = new PointClass();
pointCollection.RemovePoints(0, pointCollection.PointCount);
for (int i = 0; i < pList.Count; i++)
{
p.PutCoords(pList[i].Lng, pList[i].Lat);
pointCollection.AddPoint(p);
}
base.Geometry = pointCollection as IGeometry;
}
Update();
pointList = pList;//更新坐标集合
return(true);
}
/// <summary>
/// 更新圆心
/// </summary>
/// <param name="centerDot"></param>
public void UpdatePosition(MapLngLat centerDot)
{
centerPoint = new PointClass()
{
X = centerDot.Lng, Y = centerDot.Lat
};
centerPoint.Z = centerDot.Alt;
IZAware zAware = (IGeometry)centerPoint as IZAware;
zAware.ZAware = true;
upperAxisVector3D = new Vector3DClass();
upperAxisVector3D.SetComponents(0, 0, 10);
lowerAxisVector3D = new Vector3DClass();
lowerAxisVector3D.SetComponents(0, 0, -10);
lowerAxisVector3D.XComponent -= vectorComponentOffset;
normalVector3D = upperAxisVector3D.CrossProduct(lowerAxisVector3D) as IVector3D;
normalVector3D.Magnitude = this.radius;
double rotationAngleInRadians = 2 * (Math.PI / 180);
pointCollection.RemovePoints(0, pointCollection.PointCount);
for (int i = 0; i < 180; i++)
{
normalVector3D.Rotate(-1 * rotationAngleInRadians, upperAxisVector3D);
IPoint vertexPoint = new PointClass();
vertexPoint.X = centerPoint.X + normalVector3D.XComponent;
vertexPoint.Y = centerPoint.Y + normalVector3D.YComponent;
vertexPoint.Z = centerPoint.Z;
pointCollection.AddPoint(vertexPoint, missing, missing);
//if (i == 0) pointCollection.AddPoint(vertexPoint, missing, missing);
}
base.Geometry = pointCollection as IGeometry;
this.Update();
}
//删除点对
private void PointsDataGridView_CellClick(object sender, DataGridViewCellEventArgs e)
{
if (e.ColumnIndex == 0 && e.RowIndex < PointsDataGridView.Rows.Count)
{
PointsDataGridView.Rows.RemoveAt(e.RowIndex);
fromPoint.RemovePoints(e.RowIndex, 1);
toPoint.RemovePoints(e.RowIndex, 1);
AddPoint();
//Register();
activeView.Refresh();
DrawPoints();
}
}
private void btnImportControlPoints_Click(object sender, EventArgs e)
{
try
{
OpenFileDialog dlg = new OpenFileDialog();
dlg.Filter = "文本文件(*.txt;*.TXT)|*.txt;*.TXT|所有文件(*.*)|*.*";
if (dlg.ShowDialog() == DialogResult.OK)
{
OriginPoints.RemovePoints(0, OriginPoints.PointCount);
TargetPoints.RemovePoints(0, TargetPoints.PointCount);
TransformedOriginPoints.RemovePoints(0, TransformedOriginPoints.PointCount);
StreamReader sr = new StreamReader(dlg.FileName);
while (!sr.EndOfStream)
{
string szCurrent = sr.ReadLine();
string[] szStringList = szCurrent.Split('\t');
if (szStringList.Length != 4)
{
continue;
}
else
{
IPoint pSrcPoint = new PointClass();
pSrcPoint.X = Convert.ToDouble(szStringList[0]);
pSrcPoint.Y = Convert.ToDouble(szStringList[1]);
OriginPoints.AddPoint(pSrcPoint);
IPoint pDstPoint = new PointClass();
pDstPoint.X = Convert.ToDouble(szStringList[2]);
pDstPoint.Y = Convert.ToDouble(szStringList[3]);
TargetPoints.AddPoint(pDstPoint);
}
}
sr.Close();
RefreshControlAllPoints();
if (OriginPoints.PointCount > 0)
{
dataGridViewX1.Rows[0].Selected = true;
}
//DrawControlPoint();
}
}
catch (System.Exception ex)
{
MessageBox.Show(ex.Message);
}
}
public static int ThinPolyline3D(IPointCollection ipointCollection_0)
{
int num = -1;
int index = 0;
int num2 = -1;
int num3 = 0;
while (ipointCollection_0.PointCount != num2)
{
num2 = ipointCollection_0.PointCount;
ISegmentCollection segmentCollection = ipointCollection_0 as ISegmentCollection;
IEnumSegment enumSegments = segmentCollection.EnumSegments;
enumSegments.Reset();
ISegment segment;
enumSegments.Next(out segment, ref num, ref index);
ISegment segment2;
enumSegments.Next(out segment2, ref num, ref index);
while (segment2 != null)
{
int num4 = segment.ReturnTurnDirection(segment2);
if (num4 == 1)
{
ipointCollection_0.RemovePoints(index, 1);
}
segment = segment2;
enumSegments.Next(out segment2, ref num, ref index);
}
num3++;
}
return(num3);
}
/// <summary>
/// 更新位置
/// </summary>
/// <param name="pList">点集合</param>
/// <returns></returns>
public bool UpdatePosition(List <MapLngLat> pList)
{
IPointCollection pointCollection = base.Geometry as IPointCollection;
if (pointCollection == null)
{
return(false);
}
this.Dosomething((Action) delegate()
{
pointCollection.RemovePoints(0, pointCollection.PointCount);//清除集合内所有坐标点
IPoint p = new PointClass();
foreach (var item in pList)
{
p.PutCoords(item.Lng, item.Lat);
p.Z = item.Alt;
pointCollection.AddPoint(p);
}
if (this.Rasterize) //判断图元是否为栅格化
{
this.Rasterize = false;
base.Geometry = pointCollection as IGeometry;
this.Rasterize = true;
}
else
{
base.Geometry = pointCollection as IGeometry;
}
Update();
}, true);
return(true);
}
private void btnUndo_Click(object sender, EventArgs e)
{
int entityId = _entityId;
IEditor3 editor = ArcUtils.Editor;
var sketch = editor as IEditSketch3;
Measurement measurement = Measurement.Get(entityId);
if (sketch != null)
{
if (measurement.IsTypeOfLayer(TypeOfLayer.Point))
{
_frmGlobespotter.RemoveMeasurementPoint(entityId, _pointId);
_frmGlobespotter.AddMeasurementPoint(entityId);
}
else
{
int nrPoints;
IGeometry geometry = sketch.Geometry;
IPointCollection ptColl = measurement.ToPointCollection(geometry, out nrPoints);
int removePoints = ((measurement.IsTypeOfLayer(TypeOfLayer.Polygon)) && (ptColl.PointCount == 2) &&
(nrPoints == 1)) ? 2 : 1;
ptColl.RemovePoints((nrPoints - 1), removePoints);
sketch.Geometry = ptColl as IGeometry;
IActiveView activeView = ArcUtils.ActiveView;
if (activeView != null)
{
activeView.Refresh();
}
}
}
}
//删除节点事件
void btnRemovePoint_Click(object sender, EventArgs e)
{
try
{
object misobj = Type.Missing;
m_Editor.StartOperation();
IGeometry ring = (cbxRings.SelectedItem as CommonComboBoxItem).Tag as IGeometry;
IPointCollection pc = ring as IPointCollection;
pc.RemovePoints((int)listPointCollection.SelectedItems[0].Tag, 1);
IFeature feature = (treeFeatures.SelectedNode.Tag as IFeature);
IGeometryCollection geoCol = cbxRings.Tag as IGeometryCollection;
geoCol.AddGeometry(ring, ref misobj, ref misobj);
geoCol.RemoveGeometries(cbxRings.SelectedIndex, 1);
feature.Shape = geoCol as IGeometry;
feature.Store();
int removePointIndex = listPointCollection.SelectedItems[0].Index;
listPointCollection.SelectedItems[0].Remove();
m_Editor.StopOperation("RemovePoint");
this.cbxRings_SelectedIndexChanged(sender, e);
if (listPointCollection.Items.Count > removePointIndex)
{
listPointCollection.Items[removePointIndex].Selected = true;
listPointCollection.TopItem = listPointCollection.SelectedItems[0];
}
}
catch (Exception ex)
{
MessageBox.Show(this, ex.Message, "提示", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
}
/// <summary>
/// 结束编辑，删除坐标集合最后一个坐标点
/// </summary>
private void endEdit()
{
IPointCollection polygonPoint = polygonElement.Geometry as IPointCollection;
polygonPoint.RemovePoints(polygonPoint.PointCount - 1, 1);
polygonElement.Geometry = polygonPoint as IGeometry;
}
/// <summary>
/// 更新线的位置
/// </summary>
/// <param name="pList">经纬度列表</param>
/// <returns></returns>
public bool UpdatePosition(List <MapLngLat> pList)
{
IPointCollection pointCollection = base.Geometry as IPointCollection;
if (pointCollection != null)
{
pointCollection.RemovePoints(0, pointCollection.PointCount); // 清空之前的点，再添加新点
for (int i = 0; i < pList.Count; i++)
{
IPoint point = new PointClass();
point.PutCoords(pList[i].Lng, pList[i].Lat);
point.Z = pList[i].Alt;
(point as IZAware).ZAware = true;
pointCollection.AddPoint(point);
}
Dosomething((Action) delegate()
{
int outIndex = -1;
graphcisLayer.FindElementIndex(this, out outIndex);
if (outIndex > 0)
{
base.Geometry = pointCollection as IGeometry;
graphcisLayer.UpdateElementByIndex(outIndex);
}
}, true);
return(true);
}
return(false);
}
/// <summary>
/// 更新位置
/// </summary>
/// <param name="oldLngLat">原来的位置</param>
/// <param name="newLngLat">新的位置</param>
/// <returns></returns>
public bool UpdatePosition(MapLngLat oldLngLat, MapLngLat newLngLat)
{
this.Dosomething((Action) delegate()
{
IPoint newPoint = new PointClass();
newPoint.PutCoords(newLngLat.Lng, newLngLat.Lat);
newPoint.Z = newLngLat.Alt;
IPoint oldPoint = new PointClass()
{
X = oldLngLat.Lng, Y = oldLngLat.Lat, Z = oldLngLat.Alt
};
IPointCollection pointCollection = base.Geometry as IPointCollection;
for (int i = 0; i < pointCollection.PointCount; i++)
{
if (pointCollection.get_Point(i).Compare(oldPoint) == 0)
{
pointCollection.RemovePoints(i, 1);
pointCollection.AddPoint(newPoint);
break;
}
}
base.Geometry = pointCollection as IGeometry;
Update();
}, true);
return(true);
}
/// <summary>
/// 回收变量
/// </summary>
public void Recycle()
{
m_NewPolygonFeedback = null;
m_ptCollection.RemovePoints(0, m_ptCollection.PointCount);
m_ptCollection = null;
m_TracePolygon = null;//20140218 lyf
m_hookHelper.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewGraphics, null, m_hookHelper.ActiveView.Extent);
}
private IEnvelope pEnv; //记录数据视图的extent
private void frmMeasureResult_frmClosed() //委托函数所调用的事件，主要用于结束量算和清空线和面对象
{
if (pNewLineFeedback != null) //判断面对象是否为空不为空则清空
{
pNewLineFeedback.Stop();
pNewLineFeedback = null;
}
if (pNewPolygonFeedback != null)//清空面对象
{
pNewPolygonFeedback.Stop();
pNewPolygonFeedback = null;
pAreaPointCollection.RemovePoints(0, pAreaPointCollection.PointCount); //清空点集中所有点
}
axMapControl1.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewForeground, null, null); //清空量算画的线、面对象
axMapControl1.MousePointer = esriControlsMousePointer.esriPointerDefault; //结束量算功能
mousedownname = "";
}
private void button3_Click(object sender, EventArgs e)
{
listView1.Items.Clear();
FromPoint.RemovePoints(0, FromPoint.PointCount);
ToPoint.RemovePoints(0, ToPoint.PointCount);
int Count = 0;
OpenFileDialog filedlg = new OpenFileDialog();
filedlg.Title = "选择坐标文本文件";
filedlg.Filter = "文本文件(.txt)|*.txt";
if (filedlg.ShowDialog() != DialogResult.OK)
{
return;
}
string fullpath = filedlg.FileName;
string strline = "";
string strX0 = "";
string strY0 = "";
string strX1 = "";
string strY1 = "";
//char []split = new char
using (StreamReader sr = new StreamReader(fullpath))
{
object obj = Type.Missing;
while ((strline = sr.ReadLine()) != null)
{
if (strline.Contains(",") == false || strline == "控制点" || strline.Contains("****") || strline.Trim() == "")
{
continue;
}
string[] splits = strline.Split(new char[] { ',', ';' });
strY0 = splits[1];
strX0 = splits[2];
strY1 = splits[3];
strX1 = splits[4];
ListViewItem newItem = new ListViewItem();
newItem.Checked = true;
Count++;//坐标个数增加
newItem.Text = Count.ToString();
newItem.SubItems.Add(strY0.Trim());
newItem.SubItems.Add(strX0.Trim());
newItem.SubItems.Add(strY1.Trim());
newItem.SubItems.Add(strX1.Trim());
listView1.Items.Add(newItem);
IPoint newPt = new PointClass();
newPt.X = double.Parse(strX0.Trim());
newPt.Y = double.Parse(strY0.Trim());
FromPoint.AddPoint(newPt, ref obj, ref obj);
newPt = new PointClass();
newPt.X = double.Parse(strX1.Trim());
newPt.Y = double.Parse(strY1.Trim());
ToPoint.AddPoint(newPt, ref obj, ref obj);
}
}
}
//#region 测试绘制
//private void DrawControlPoint()
//{
// try
// {
// // if (m_ToolAddControlPoints == null) return;
// int linelength = 8;
// IGraphicsContainer pGraphiccsContainer = pMapCtr.Map as IGraphicsContainer;
// if (pGraphiccsContainer == null)
// return;
// for (int i = 0; i < TargetPoints.PointCount; i++)
// {
// IPoint opt = TransformedOriginPoints.get_Point(i);
// IPoint tpt = TargetPoints.get_Point(i);
// IMapControl3 mapctrl = pMapCtr as IMapControl3;
// //判断点是否在视图范围内，如果在即绘制，不在则不绘制
// IEnvelope pEnvelope = mapctrl.ActiveView.Extent;
// //int ox = 0; int oy = 0; int tx = 0; int ty = 0;
// //mapctrl.FromMapPoint(opt, ref ox, ref oy);
// //mapctrl.FromMapPoint(tpt, ref tx, ref ty);
// #region 连接线
// ILineElement pConnectLineElement = new LineElementClass();
// ILineSymbol pLineSymbol = new SimpleLineSymbolClass();
// pLineSymbol.Width = 2;
// pConnectLineElement.Symbol = pLineSymbol;
// IElement pConnectElement = pConnectLineElement as IElement;
// //设置GEOMETRY
// IPolyline pLine = new PolylineClass();
// //IPoint ptFromPoint = opt;// new PointClass();
// //ptFromPoint.X = ox;
// //ptFromPoint.Y = oy;
// pLine.FromPoint = opt;// ptFromPoint;
// //IPoint ptToPoint = new PointClass();
// //ptToPoint.X = ox;
// //ptToPoint.Y = oy;
// pLine.ToPoint = tpt;
// pConnectElement.Geometry = pLine;
// pGraphiccsContainer.AddElement(pConnectElement, 0);
// //设置颜色
// //if (pMapCtr.CurrentTool ==m_FrmLinkTableRaster.selectedidx)
// //{
// //
// //}
// #endregion
// #region 源点十字丝
// // gcs.DrawLine(penred, ox - linelength, oy, ox + linelength, oy);
// // gcs.DrawLine(penred, ox, oy - linelength, ox, oy + linelength);
// // gcs.DrawLine(pengreen, tx - linelength, ty, tx + linelength, ty);
// // gcs.DrawLine(pengreen, tx, ty - linelength, tx, ty + linelength);
// // gcs.DrawString(i.ToString(), strFont, strBrush, ox+4, oy+4);
// //ILineElement pSrcLineElement = new LineElementClass();
// //IElement pSrcElement = pSrcLineElement as IElement;
// //ILine pSrcLine = new LineClass();
// //IPoint pSrcFromPoint = new PointClass();
// //pSrcFromPoint.X=ox - linelength;
// //pSrcFromPoint.Y = oy;
// //IPoint pSrcFromPoint = new PointClass();
// //pSrcFromPoint.X = ox - linelength;
// //pSrcFromPoint.Y = oy;
// #endregion
// #region 目标点十字丝
// #endregion
// }
// pMapCtr.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewGraphics, null, null);
// }
// catch (System.Exception ex)
// {
// }
//}
//#endregion
//删除选中点
private void buttonX1_Click(object sender, EventArgs e)
{
if (dataGridViewX1.SelectedRows.Count == 0)
{
return;
}
int nCount = dataGridViewX1.SelectedRows.Count;
List <int> nIndexList = new List <int>();
for (int i = 0; i < nCount; i++)
{
DataGridViewRow row = dataGridViewX1.SelectedRows[i];
nIndexList.Add(row.Index);
}
//升序排列
nIndexList.Sort();
nCount = -1;
while ((nCount = nIndexList.Count) != 0)
{
OriginPoints.RemovePoints(nIndexList[nCount - 1], 1);
TargetPoints.RemovePoints(nIndexList[nCount - 1], 1);
nIndexList.RemoveAt(nCount - 1);
}
//for (int i = 0; i < nCount; i++)
//{
// int idx = nIndexArray[i];
// OriginPoints.RemovePoints(idx, 1);
// TargetPoints.RemovePoints(idx, 1);
//}
RefreshControlAllPoints();
//if(dataGridViewX1)
//if (idx - 1 >= 0)
//{
// dataGridViewX1.Rows[idx - 1].Selected = true;
//}
//if (dataTable1.Rows.Count > 0)
//{
// dataGridViewX1.Rows[idx-1].Selected = true;
//}
}
public void RemovePoint(int partIndex, int pointIndex)
{
// TODO: 添加 ModifyMultiPoint.WSGRI.DigitalFactory.DFQuery.IModifyGeometry.RemovePoint 实现
IPointCollection pColl = (IPointCollection)Feature.Shape;
if ((partIndex > -1) && (partIndex < pColl.PointCount))
{
pColl.RemovePoints(partIndex, 1);
Feature.Shape = (IGeometry)pColl;
Feature.Store();
}
}
public void CancleSketch()
{
IEngineEditSketch sketch = this._editor as IEngineEditSketch;
IPointCollection geometry = (IPointCollection)sketch.Geometry;
while (geometry.PointCount > 0)
{
geometry.RemovePoints(geometry.PointCount - 1, geometry.PointCount);
}
sketch.Geometry = (IGeometry)geometry;
sketch.RefreshSketch();
}
public void OnMouseUp(int button, int shift, int x, int y)
{
IRelationalOperator envelope = this._feedBack.Stop().Envelope as IRelationalOperator;
if (!envelope.Disjoint(this._feature.Shape))
{
string[] strArray = this._errInf.Split(new char[] { ',' });
double num = double.Parse(strArray[0]);
double num2 = double.Parse(strArray[1]);
IPoint point = new PointClass {
X = num,
Y = num2
};
if (!envelope.Disjoint(point.Envelope))
{
IGeometryCollection shape = this._feature.Shape as IGeometryCollection;
try
{
Editor.UniqueInstance.StartEditOperation();
for (int i = 0; i < shape.GeometryCount; i++)
{
IPointCollection points = shape.get_Geometry(i) as IPointCollection;
int num4 = -1;
for (int j = 0; j < points.PointCount; j++)
{
IPoint point2 = points.get_Point(j);
if ((point2.X == x) && (point2.Y == y))
{
if (num4 == -1)
{
num4 = j;
}
else
{
points.RemovePoints(j, 1);
}
}
}
}
Editor.UniqueInstance.StopEditOperation();
EditTask.ToplogicChkState = ToplogicCheckState.Failure;
}
catch (Exception exception)
{
Editor.UniqueInstance.AbortEditOperation();
this.mErrOpt.ErrorOperate(this.mSubSysName, "ShapeEdit.RPointDelete", "OnMouseUp", exception.GetHashCode().ToString(), exception.Source, exception.Message, "", "", "");
}
}
}
}
private void btnSaveClass_Click(object sender, EventArgs e)
{
if (cbClassName.Text == "")
{
MessageBox.Show("请输入类别名称！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Asterisk);
return;
}
if (txtSampleCount.Text == "")
{
MessageBox.Show("没有需要保存的样本！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Asterisk);
return;
}
if (bNewClassOrNot)
{
ListViewItem pListViewItem = new ListViewItem(this.txtClassID.Text);
pListViewItem.SubItems.Add(this.cbClassName.Text);
pListViewItem.SubItems.Add(this.txtSampleCount.Text);
pListViewItem.SubItems.Add(SetColorByIndex(this.listView1.Items.Count + 1).Name);
for (int i = 0; i < pGeometryCollection.GeometryCount; i++)
{
pointCollection = pGeometryCollection.get_Geometry(i) as IPointCollection;
for (int j = 0; j < pointCollection.PointCount; j++)
{
xCoordinate += pointCollection.get_Point(j).X.ToString() + ",";
yCoordinate += pointCollection.get_Point(j).Y.ToString() + ",";
}
xCoordinate = xCoordinate.Substring(0, xCoordinate.Length - 1);
yCoordinate = yCoordinate.Substring(0, yCoordinate.Length - 1);
xCoordinate = xCoordinate + "*";
yCoordinate = yCoordinate + "*";
}
xCoordinate = xCoordinate.Substring(0, xCoordinate.Length - 1);
yCoordinate = yCoordinate.Substring(0, yCoordinate.Length - 1);
pListViewItem.SubItems.Add(xCoordinate + ":" + yCoordinate);
pListViewItem.BackColor = SetColorByIndex(this.listView1.Items.Count + 1);
this.listView1.Items.Add(pListViewItem);
pointCollection.RemovePoints(0, pointCollection.PointCount);
pGeometryCollection.RemoveGeometries(0, pGeometryCollection.GeometryCount);
xCoordinate = "";
yCoordinate = "";
}
this.bNewClassOrNot = false;
this.tsbEndCreate.Enabled = false;
this.bCreateOrNot = false;
this.btnSaveClass.Enabled = false;
}
private void btnDeleteLink_Click(object sender, EventArgs e)
{
DataGridViewSelectedRowCollection rowCollection = this.dataGridViewX1.SelectedRows;
int nCount = rowCollection.Count;
int nOriCount = m_OriginPoints.PointCount;
IPointCollection tmpPointCollectionOri = new MultipointClass();
IPointCollection tmpPointCollectionDst = new MultipointClass();
for (int i = 0; i < nOriCount; i++)
{
bool bFlag = false;
for (int j = 0; j < nCount; j++)
{
if (i == rowCollection[j].Index)
{
bFlag = true;
break;
}
}
if (bFlag == false)
{
tmpPointCollectionOri.AddPoint(m_OriginPoints.get_Point(i));
tmpPointCollectionDst.AddPoint(m_TargetPoints.get_Point(i));
}
}
m_OriginPoints.RemovePoints(0, m_OriginPoints.PointCount);
m_TargetPoints.RemovePoints(0, m_TargetPoints.PointCount);
for (int i = 0; i < tmpPointCollectionDst.PointCount; i++)
{
m_OriginPoints.AddPoint(tmpPointCollectionOri.get_Point(i));
m_TargetPoints.AddPoint(tmpPointCollectionDst.get_Point(i));
}
RefreshDataTable();
//m_pMapCtr.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewGraphics, null, null);
//m_pMapCtr.RefreshLayer();
//if (refreshLayer != null)
//{
// refreshLayer();
//}
}
public void DeleteAllControlPoints()
{
IMapControl2 pMapCtr = (((IToolbarControl)m_hookHelper.Hook).Buddy) as IMapControl2;
if (pMapCtr != null)
{
IGeoReference pGR = pRasterLayer as IGeoReference;
if (pGR != null)
{
pGR.Reset();
TransformedOriginPoints.RemovePoints(0, TransformedOriginPoints.PointCount);
OriginPoints.RemovePoints(0, OriginPoints.PointCount);
TargetPoints.RemovePoints(0, TargetPoints.PointCount);
m_FrmLinkTableRaster.RefreshControlAllPoints();
pMapCtr.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewGeography, null, null);
}
}
}
public void OnMouseUp(int button, int shift, int x, int y)
{
if (button != 2)
{
try
{
IGeometry editShape = Editor.UniqueInstance.EditShape;
IPoint queryPoint = this._hookHelper.ActiveView.ScreenDisplay.DisplayTransformation.ToMapPoint(x, y);
IHitTest test = editShape as IHitTest;
IPoint hitPoint = new PointClass();
double hitDistance = 0.0;
int hitPartIndex = 0;
int hitSegmentIndex = 0;
bool bRightSide = false;
double searchRadius = this._hookHelper.ActiveView.ScreenDisplay.DisplayTransformation.FromPoints(ToolConfig.MouseTolerance);
esriGeometryHitPartType esriGeometryPartVertex = esriGeometryHitPartType.esriGeometryPartVertex;
test.HitTest(queryPoint, searchRadius, esriGeometryPartVertex, hitPoint, ref hitDistance, ref hitPartIndex, ref hitSegmentIndex, ref bRightSide);
if (!hitPoint.IsEmpty)
{
IEngineSketchOperation operation = new EngineSketchOperationClass();
operation.Start(Editor.UniqueInstance.EngineEditor);
IGeometryCollection geometrys = editShape as IGeometryCollection;
IPointCollection points = geometrys.get_Geometry(hitPartIndex) as IPointCollection;
object missing = Type.Missing;
new object();
object before = new object();
before = hitPartIndex;
points.RemovePoints(hitSegmentIndex, 1);
operation.SetMenuString("Delete Vertex");
esriEngineSketchOperationType esriEngineSketchOperationVertexDeleted = esriEngineSketchOperationType.esriEngineSketchOperationVertexDeleted;
geometrys.RemoveGeometries(hitPartIndex, 1);
geometrys.AddGeometry(points as IGeometry, ref before, ref missing);
operation.Finish(null, esriEngineSketchOperationVertexDeleted, queryPoint);
Editor.UniqueInstance.FinishSketch();
this.OnClick();
}
}
catch (Exception exception)
{
Editor.UniqueInstance.AbortEditOperation();
this._mErrOpt.ErrorOperate(this._mSubSysName, "ShapeEdit.DeleteVertex", "OnMouseUp", exception.GetHashCode().ToString(), exception.Source, exception.Message, "", "", "");
}
}
}
//测量结果窗口关闭响应事件
private void frmMeasureResult_frmColsed()
{
//清空线对象
if (pNewLineFeedback != null)
{
pNewLineFeedback.Stop();
pNewLineFeedback = null;
}
//清空面对象
if (pNewPolygonFeedback != null)
{
pNewPolygonFeedback.Stop();
pNewPolygonFeedback = null;
pAreaPointCol.RemovePoints(0, pAreaPointCol.PointCount); //清空点集中所有点
}
//清空量算画的线、面对象
axMapControl.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewForeground, null, null);
//结束量算功能
pMouseOperate = string.Empty;
axMapControl.MousePointer = esriControlsMousePointer.esriPointerDefault;
}
/// <summary>
/// 移除点
/// </summary>
/// <param name="lnglat"></param>
public void RemovePoint(MapLngLat lnglat)
{
this.Dosomething((Action) delegate()
{
IPointCollection pointCollection = base.Geometry as IPointCollection;
IPoint point = new PointClass();
point.PutCoords(lnglat.Lng, lnglat.Lat);
point.Z = lnglat.Alt;
for (int i = 0; i < pointCollection.PointCount; i++)
{
if (pointCollection.get_Point(i).Compare(point) == 0)
{
pointCollection.RemovePoints(i, 1);
break;
}
}
base.Geometry = pointCollection as IGeometry;
Update();
}, true);
}
private void DeletePoint()
{
try
{
DataRow focusedDataRow = this.gridView1.GetFocusedDataRow();
if (focusedDataRow != null)
{
int i = Convert.ToInt32(focusedDataRow[0]);
int selectedIndex = this.listPart.SelectedIndex;
if (selectedIndex >= 0)
{
IGeometryCollection geometry = this.m_Geometry as IGeometryCollection;
IPointCollection points = geometry.get_Geometry(selectedIndex) as IPointCollection;
IPoint data = points.get_Point(i);
points.RemovePoints(i, 1);
IEngineSketchOperation operation = new EngineSketchOperationClass();
operation.Start(Editor.UniqueInstance.EngineEditor);
operation.SetMenuString("Delete Vertex");
esriEngineSketchOperationType esriEngineSketchOperationVertexDeleted = esriEngineSketchOperationType.esriEngineSketchOperationVertexDeleted;
object missing = System.Type.Missing;
object before = new object();
before = selectedIndex;
geometry.RemoveGeometries(selectedIndex, 1);
geometry.AddGeometry(points as IGeometry, ref before, ref missing);
operation.Finish(null, esriEngineSketchOperationVertexDeleted, data);
Editor.UniqueInstance.FinishSketch();
IEngineEditTask taskByUniqueName = Editor.UniqueInstance.EngineEditor.GetTaskByUniqueName("ControlToolsEditing_ModifyFeatureTask");
Editor.UniqueInstance.EngineEditor.CurrentTask = taskByUniqueName;
int index = this.listPart.SelectedIndex;
if (index >= 0)
{
this.ShowPointList(index);
}
}
}
}
catch
{
}
}
/// <summary>
/// 移除点
/// </summary>
/// <param name="lngLat">经纬度</param>
public void RemovePoint(MapLngLat lngLat)
{
IPointCollection pointCollection = base.Geometry as IPointCollection;
if (pointCollection != null)
{
IPoint point = new PointClass()
{
X = lngLat.Lng, Y = lngLat.Lat, Z = lngLat.Alt
};
for (int i = 0; i < pointCollection.PointCount; i++)
{
if (pointCollection.get_Point(i).Compare(point) == 0)
{
pointCollection.RemovePoints(i, 1);
Dosomething((Action) delegate()
{
base.Geometry = pointCollection as IGeometry;
}, true);
break;
}
}
}
}
/// <summary>
/// ��ȡͼ��������
/// </summary>
/// <param name="ipPointCollection">����㼯��</param>
/// <param name="ipTuFuEnvelope">ͼ����������</param>
/// <returns></returns>
private IArray GetTuFuGriddingLine(IPointCollection ipPointCollection, IEnvelope ipTuFuEnvelope)
{
try
{
IArray aryGriddingLine = new ArrayClass();
double dMinX = 0.0;
double dMaxX = 0.0;
double dMinY = 0.0;
double dMaxY = 0.0;
dMinX = ipTuFuEnvelope.XMin;
dMaxX = ipTuFuEnvelope.XMax;
dMinY = ipTuFuEnvelope.YMin;
dMaxY = ipTuFuEnvelope.YMax;
int nPointCount = ipPointCollection.PointCount;
IPoint ipPoint1 = null;
IPoint ipPoint2 = null;
double dX1 = 0.0;
double dY1 = 0.0;
double dX2 = 0.0;
double dY2 = 0.0;
double dHeight = (dMaxY - dMinY)/1000;
double dWidth = (dMaxX - dMinX)/1000;
double dTempTol = dHeight > dWidth ? dWidth : dHeight;
List<int> aryVerticalIndex = new List<int>(); //CArray<long,long> aryVerticalIndex;//���д�ֱ�����ߵ��������
List<int> aryHorizontal = new List<int>(); //CArray<long,long> aryHorizontal;//����ˮƽ�����ߵ��������
int nVerCount = 0;
int nHorCount = 0;
int i, j;
//����߿��ϵĵ�,�м�ĵ�ȥ��
for (i = 0; i < nPointCount;)
{
ipPoint1 = ipPointCollection.get_Point(i);
if (!PointBIsOverBoundary(ipPoint1, ipTuFuEnvelope, dTempTol))
{
ipPointCollection.RemovePoints(i, 1);
nPointCount--;
}
else
{
i++;
}
}
nPointCount = ipPointCollection.PointCount;
for (i = 0; i < nPointCount; i++)
{
ipPoint1 = ipPointCollection.get_Point(i);
dX1 = ipPoint1.X;
dY1 = ipPoint1.Y;
nVerCount = aryVerticalIndex.Count;
if (nVerCount == 0 && Math.Abs(dY1 - dMinY) < dTempTol
&& Math.Abs(dX1 - dMinX) > dTempTol
&& Math.Abs(dX1 - dMaxX) > dTempTol)
{
nVerCount++;
aryVerticalIndex.Add(i);
}
nHorCount = aryHorizontal.Count;
if (nHorCount == 0 && Math.Abs(dX1 - dMinX) < dTempTol
&& Math.Abs(dY1 - dMinY) > dTempTol
&& Math.Abs(dY1 - dMaxY) > dTempTol)
{
nHorCount++;
aryHorizontal.Add(i);
}
for (j = 0; j < nVerCount; j++)
{
ipPoint2 = ipPointCollection.get_Point(aryVerticalIndex[j]);
dX2 = ipPoint2.X;
dY2 = ipPoint2.Y;
if (Math.Abs(dX1 - dX2) < dTempTol && Math.Abs(dY1 - dY2) < dTempTol)
{
break;
}
}
if (j >= nVerCount)
{
//ȡ�ײ�ȥ����������ĵ�Ϊ���
if (Math.Abs(dY1 - dMinY) < dTempTol
&& Math.Abs(dX1 - dMinX) > dTempTol
&& Math.Abs(dX1 - dMaxX) > dTempTol)
{
aryVerticalIndex.Add(i);
}
}
for (j = 0; j < nHorCount; j++)
{
ipPoint2 = ipPointCollection.get_Point(aryHorizontal[j]);
dX2 = ipPoint2.X;
dY2 = ipPoint2.Y;
if (Math.Abs(dX1 - dX2) < dTempTol && Math.Abs(dY1 - dY2) < dTempTol)
{
break;
}
}
if (j >= nHorCount)
{
//ȡ���ȥ����������ĵ�Ϊ���
if (Math.Abs(dX1 - dMinX) < dTempTol
&& Math.Abs(dY1 - dMinY) > dTempTol
&& Math.Abs(dY1 - dMaxY) > dTempTol)
{
aryHorizontal.Add(i);
}
}
}
nPointCount = ipPointCollection.PointCount;
//��֯��ֱ������
nVerCount = aryVerticalIndex.Count;
for (i = 0; i < nVerCount; i++)
{
ipPoint1 = ipPointCollection.get_Point(aryVerticalIndex[i]);
dX1 = ipPoint1.X;
dY1 = ipPoint1.Y;
//������
IPolyline ipPolyline = new PolylineClass();
ipPolyline.FromPoint = ipPoint1;
for (j = 0; j < nPointCount; j++)
{
ipPoint2 = ipPointCollection.get_Point(j);
dX2 = ipPoint2.X;
dY2 = ipPoint2.Y;
if (Math.Abs(dX1 - dX2) < dTempTol && Math.Abs(dY1 - dY2) > dTempTol)
{
//����յ�
ipPolyline.ToPoint = ipPoint2;
break;
}
}
aryGriddingLine.Add(ipPolyline);
}
//��֯ˮƽ������
nHorCount = aryHorizontal.Count;
for (i = 0; i < nHorCount; i++)
{
ipPoint1 = ipPointCollection.get_Point(aryHorizontal[i]);
dX1 = ipPoint1.X;
dY1 = ipPoint1.Y;
//������
IPolyline ipPolyline = new PolylineClass();
ipPolyline.FromPoint = ipPoint1;
for (j = 0; j < nPointCount; j++)
{
ipPoint2 = ipPointCollection.get_Point(j);
dX2 = ipPoint2.X;
dY2 = ipPoint2.Y;
if (Math.Abs(dY1 - dY2) < dTempTol && Math.Abs(dX1 - dX2) > dTempTol)
{
//����յ�
ipPolyline.ToPoint = ipPoint2;
break;
}
}
aryGriddingLine.Add(ipPolyline);
}
return aryGriddingLine;
}
catch (Exception ex)
{
SendMessage(enumMessageType.Exception, ex.ToString());
return null;
}
}
public void DrawGrid()
{
string str = "";
string str2 = "";
ITextElement element = null;
ITextElement element2 = null;
ITextElement element3 = null;
ITextElement element4 = null;
double num = 40.0;
double num2 = 20.0;
double num3 = 10.0;
int num4 = 13;
int num5 = 10;
IPoint point = null;
IElement item = null;
ITextSymbol symbol = new TextSymbolClass();
ITextSymbol symbol2 = new TextSymbolClass();
ITextSymbol symbol3 = new TextSymbolClass();
ITextSymbol symbol4 = new TextSymbolClass();
ITextSymbol symbol5 = new TextSymbolClass();
ITextSymbol symbol6 = new TextSymbolClass();
int num6 = 0;
int num7 = 0;
int num8 = 1000;
double x = 0.0;
double y = 0.0;
IPoint point2 = new PointClass();
object missing = System.Type.Missing;
IElementProperties2 properties = null;
IMarkerElement element6 = null;
ISymbol symbol7 = new SimpleMarkerSymbolClass();
ISimpleMarkerSymbol symbol8 = symbol7 as ISimpleMarkerSymbol;
IRgbColor color = new RgbColorClass
{
Red = 0,
Blue = 0,
Green = 0
};
symbol8.Size = 10.0;
symbol8.Style = esriSimpleMarkerStyle.esriSMSCross;
symbol8.Color = color;
double num11 = 0.0;
double num12 = 0.0;
double num13 = 0.0;
double num14 = 0.0;
int num15 = 0;
int num16 = 0;
int num17 = 0;
int num18 = 0;
int num19 = 0;
double num20 = 0.0;
double num21 = 0.0;
double num22 = 0.0;
double num23 = 0.0;
try
{
symbol = base.FontStyle((double)num4, esriTextHorizontalAlignment.esriTHARight,
esriTextVerticalAlignment.esriTVABottom);
symbol2 = base.FontStyle((double)num5, esriTextHorizontalAlignment.esriTHALeft,
esriTextVerticalAlignment.esriTVABottom);
symbol3 = base.FontStyle((double)num5, esriTextHorizontalAlignment.esriTHARight,
esriTextVerticalAlignment.esriTVATop);
symbol4 = base.FontStyle((double)num4, esriTextHorizontalAlignment.esriTHALeft,
esriTextVerticalAlignment.esriTVATop);
symbol5 = base.FontStyle((double)num5, esriTextHorizontalAlignment.esriTHARight,
esriTextVerticalAlignment.esriTVABottom);
symbol6 = base.FontStyle((double)num4, esriTextHorizontalAlignment.esriTHALeft,
esriTextVerticalAlignment.esriTVABottom);
if (base.LeftUp.Y < base.RightUp.Y)
{
y = Math.Truncate(base.LeftUp.Y);
num23 = (base.RightUp.Y + base.InOutDist) + 1.0;
}
else
{
y = Math.Truncate(base.RightUp.Y);
num23 = (base.LeftUp.Y + base.InOutDist) + 1.0;
}
num15 = (int)(y % ((double)num8));
if (num15 != 0)
{
num12 = y - num15;
}
else
{
num12 = y;
}
if (base.LeftUp.X > base.LeftLow.X)
{
x = Math.Truncate((double)(base.LeftUp.X + 1.0));
num20 = (base.LeftLow.X - base.InOutDist) - 1.0;
}
else
{
x = Math.Truncate((double)(base.LeftLow.X + 1.0));
num20 = (base.LeftUp.X - base.InOutDist) - 1.0;
}
num15 = (int)(x % ((double)num8));
if (num15 != 0)
{
num11 = x + (num8 - num15);
}
else
{
num11 = x;
}
if (base.LeftLow.Y < base.RightLow.Y)
{
y = Math.Truncate(base.LeftLow.Y);
num21 = (base.LeftLow.Y - base.InOutDist) - 1.0;
}
else
{
y = Math.Truncate(base.RightLow.Y);
num21 = (base.RightLow.Y - base.InOutDist) - 1.0;
}
num15 = (int)(y % ((double)num8));
if (num15 != 0)
{
num14 = y + (num8 - num15);
}
else
{
num14 = y;
}
if (base.RightUp.X > base.RightLow.X)
{
x = Math.Truncate(base.RightLow.X);
num22 = (base.RightUp.X + base.InOutDist) + 1.0;
}
else
{
x = Math.Truncate(base.RightUp.X);
num22 = (base.RightLow.X + base.InOutDist) + 1.0;
}
num15 = (int)(x % ((double)num8));
if (num15 != 0)
{
num13 = x - num15;
}
else
{
num13 = x;
}
num16 = ((int)(num12 - num14)) / num8;
num17 = ((int)(num13 - num11)) / num8;
for (num18 = 0; num18 <= num16; num18++)
{
y = num12 - (num18 * num8);
for (num19 = 0; num19 <= num17; num19++)
{
x = num11 + (num19 * num8);
point2.PutCoords(x, y);
item = new MarkerElementClass
{
Geometry = point2
};
element6 = item as IMarkerElement;
element6.Symbol = symbol8;
properties = item as IElementProperties2;
properties.Type = "公里网";
this.ilist_0.Add(item);
}
}
IPolygon polygon = new PolygonClass();
new PolygonElementClass();
polygon = this.method_3();
double num1 = base.LeftUp.X - base.InOutDist;
double num24 = base.LeftUp.X;
double num25 = base.RightUp.X;
double num26 = base.RightUp.X + base.InOutDist;
IPoint inPoint = null;
IPoint point4 = null;
IPoint point5 = null;
IPoint point6 = null;
IPolyline polyline = new PolylineClass();
IPolyline polyline2 = new PolylineClass();
IPolyline polyline3 = new PolylineClass();
IPoint point7 = null;
IPoint point8 = null;
IPointCollection points = null;
IPointCollection points2 = null;
IElement element7 = null;
IElement element8 = null;
ILineElement element9 = null;
ILineSymbol symbol9 = this.method_5(1);
for (num18 = 0; num18 <= num16; num18++)
{
y = num12 - (num18 * num8);
point7 = new PointClass();
point8 = new PointClass();
point7.PutCoords(num20, y);
point8.PutCoords(num22, y);
points = polyline3 as IPointCollection;
if (points.PointCount >= 1)
{
points.RemovePoints(0, points.PointCount);
}
points.AddPoint(point7, ref missing, ref missing);
points.AddPoint(point8, ref missing, ref missing);
points = this.method_4(polyline3, polygon);
inPoint = points.get_Point(0);
point4 = points.get_Point(1);
point5 = points.get_Point(2);
point6 = points.get_Point(3);
element7 = new LineElementClass();
element9 = element7 as ILineElement;
element9.Symbol = symbol9;
points2 = polyline as IPointCollection;
if (points2.PointCount >= 1)
{
points2.RemovePoints(0, points2.PointCount);
}
points2.AddPoint(inPoint, ref missing, ref missing);
points2.AddPoint(point4, ref missing, ref missing);
element7.Geometry = polyline;
element8 = new LineElementClass();
element9 = element8 as ILineElement;
element9.Symbol = symbol9;
points2 = polyline2 as IPointCollection;
if (points2.PointCount >= 1)
{
points2.RemovePoints(0, points2.PointCount);
}
points2.AddPoint(point5, ref missing, ref missing);
points2.AddPoint(point6, ref missing, ref missing);
element8.Geometry = polyline2;
this.ilist_0.Add(element7);
this.ilist_0.Add(element8);
element = new TextElementClass();
element2 = new TextElementClass();
element3 = new TextElementClass();
element4 = new TextElementClass();
num6 = (int)Math.Truncate((double)(y / 100000.0));
str = num6.ToString();
num7 = (int)Math.Truncate((double)((y - (num6 * 100000)) / 1000.0));
str2 = num7.ToString();
if (str2.Length < 2)
{
str2 = "0" + str2;
}
element.Text = str2;
element2.Text = str;
element3.Text = str2;
element4.Text = str;
point = new PointClass();
point.PutCoords(inPoint.X, inPoint.Y + num2);
item = element as IElement;
item.Geometry = point;
element.Symbol = symbol;
this.ilist_0.Add(item);
if ((num18 == 0) || (num18 == num16))
{
point = new PointClass();
point.PutCoords(point4.X, point4.Y + num);
item = element2 as IElement;
item.Geometry = point;
element2.Symbol = symbol2;
this.ilist_0.Add(item);
}
point = new PointClass();
point.PutCoords(point5.X, point5.Y + num2);
item = element3 as IElement;
item.Geometry = point;
element3.Symbol = symbol;
this.ilist_0.Add(item);
if ((num18 == 0) || (num18 == num16))
{
point = new PointClass();
point.PutCoords(point6.X, point6.Y + num);
item = element4 as IElement;
item.Geometry = point;
element4.Symbol = symbol2;
this.ilist_0.Add(item);
}
}
for (num18 = 0; num18 <= num17; num18++)
{
x = num11 + (num18 * num8);
point7 = new PointClass();
point8 = new PointClass();
point7.PutCoords(x, num23);
point8.PutCoords(x, num21);
points = polyline3 as IPointCollection;
if (points.PointCount >= 1)
{
points.RemovePoints(0, points.PointCount);
}
points.AddPoint(point7, ref missing, ref missing);
points.AddPoint(point8, ref missing, ref missing);
points = this.method_4(polyline3, polygon);
inPoint = points.get_Point(0);
point4 = points.get_Point(1);
point5 = points.get_Point(2);
point6 = points.get_Point(3);
element7 = new LineElementClass();
element9 = element7 as ILineElement;
element9.Symbol = symbol9;
points2 = polyline as IPointCollection;
if (points2.PointCount >= 1)
{
points2.RemovePoints(0, points2.PointCount);
}
points2.AddPoint(inPoint, ref missing, ref missing);
points2.AddPoint(point4, ref missing, ref missing);
element7.Geometry = polyline;
element8 = new LineElementClass();
element9 = element8 as ILineElement;
element9.Symbol = symbol9;
points2 = polyline2 as IPointCollection;
if (points2.PointCount >= 1)
{
points2.RemovePoints(0, points2.PointCount);
}
points2.AddPoint(point5, ref missing, ref missing);
points2.AddPoint(point6, ref missing, ref missing);
element8.Geometry = polyline2;
this.ilist_0.Add(element7);
this.ilist_0.Add(element8);
element = new TextElementClass();
element2 = new TextElementClass();
element3 = new TextElementClass();
element4 = new TextElementClass();
num6 = (int)Math.Truncate((double)(x / 100000.0));
str = num6.ToString();
str2 = ((int)Math.Truncate((double)((x - (num6 * 100000)) / 1000.0))).ToString();
if (str2.Length < 2)
{
str2 = "0" + str2;
}
element.Text = str2;
element2.Text = str;
element3.Text = str2;
element4.Text = str;
point = new PointClass();
point.PutCoords(inPoint.X, inPoint.Y - num3);
item = element as IElement;
item.Geometry = point;
element.Symbol = symbol4;
this.ilist_0.Add(item);
if ((num18 == 0) || (num18 == num17))
{
point = new PointClass();
point.PutCoords(inPoint.X, inPoint.Y - num3);
item = element2 as IElement;
item.Geometry = point;
element2.Symbol = symbol3;
this.ilist_0.Add(item);
}
point = new PointClass();
point.PutCoords(point6.X, point6.Y + num3);
item = element3 as IElement;
item.Geometry = point;
element3.Symbol = symbol6;
this.ilist_0.Add(item);
if ((num18 == 0) || (num18 == num17))
{
point = new PointClass();
point.PutCoords(point6.X, point6.Y + num3);
item = element4 as IElement;
item.Geometry = point;
element4.Symbol = symbol5;
this.ilist_0.Add(item);
}
}
}
catch (Exception exception)
{
MessageBox.Show(exception.Message);
}
}
/// <summary>
/// 地图中鼠标按下事件监听
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void MainMapControl_OnMouseDown(object sender, IMapControlEvents2_OnMouseDownEvent e)
{
//屏幕坐标点转化为地图坐标点
pPointPt = (MainMapControl.Map as IActiveView).ScreenDisplay.DisplayTransformation.ToMapPoint(e.x, e.y);
if (e.button == 1)
{
IActiveView pActiveView = MainMapControl.ActiveView;
IEnvelope pEnvelope = new EnvelopeClass();
switch (pMouseOperate)
{
case "ZoomIn":
pEnvelope = MainMapControl.TrackRectangle();
// 如果拉框范围为空则返回
if (pEnvelope == null || pEnvelope.IsEmpty || pEnvelope.Height == 0 || pEnvelope.Width == 0)
{
return;
}
// 如果拉框有范围，则拉大到拉框范围
MainMapControl.ActiveView.Extent = pEnvelope;
MainMapControl.ActiveView.Refresh();
break;
case "ZoomOut":
pEnvelope = MainMapControl.TrackRectangle();
// 如果拉框范围为空则返回
if (pEnvelope == null || pEnvelope.IsEmpty || pEnvelope.Height == 0 || pEnvelope.Width == 0)
{
return;
}
else
{
double dWidth = pActiveView.Extent.Width * pActiveView.Extent.Width / pEnvelope.Width;
double dHeight = pActiveView.Extent.Height * pActiveView.Extent.Height / pEnvelope.Height;
double dXmin = pActiveView.Extent.XMin -
((pEnvelope.XMin - pActiveView.Extent.XMin) * pActiveView.Extent.Width /
pEnvelope.Width);
double dYmin = pActiveView.Extent.YMin -
((pEnvelope.YMin - pActiveView.Extent.YMin) * pActiveView.Extent.Height /
pEnvelope.Height);
double dXmax = dXmin + dWidth;
double dYmax = dYmin + dHeight;
pEnvelope.PutCoords(dXmin, dYmin, dXmax, dYmax);
}
pActiveView.Extent = pEnvelope;
pActiveView.Refresh();
break;
case "Pan":
MainMapControl.Pan();
break;
case "MeasureLength":
//判断追踪线对象是否为空，若是则实例化并设置当前鼠标点为起始点
if (pNewLineFeedback == null)
{
//实例化追踪线对象
pNewLineFeedback = new NewLineFeedbackClass();
pNewLineFeedback.Display = (MainMapControl.Map as IActiveView).ScreenDisplay;
//设置起点，开始动态线绘制
pNewLineFeedback.Start(pPointPt);
dToltalLength = 0;
}
else //如果追踪线对象不为空，则添加当前鼠标点
{
pNewLineFeedback.AddPoint(pPointPt);
}
//pGeometry = m_PointPt;
if (dSegmentLength != 0)
{
dToltalLength = dToltalLength + dSegmentLength;
}
break;
case "MeasureArea":
if (pNewPolygonFeedback == null)
{
//实例化追踪面对象
pNewPolygonFeedback = new NewPolygonFeedback();
pNewPolygonFeedback.Display = (MainMapControl.Map as IActiveView).ScreenDisplay;
;
pAreaPointCol.RemovePoints(0, pAreaPointCol.PointCount);
//开始绘制多边形
pNewPolygonFeedback.Start(pPointPt);
pAreaPointCol.AddPoint(pPointPt, ref missing, ref missing);
}
else
{
pNewPolygonFeedback.AddPoint(pPointPt);
pAreaPointCol.AddPoint(pPointPt, ref missing, ref missing);
}
break;
case "SelFeature":
IEnvelope pEnv = MainMapControl.TrackRectangle();
IGeometry pGeo = pEnv as IGeometry;
// 矩形框若为空，即为点选时，对点的范围进行扩展
if (pEnv.IsEmpty == true)
{
tagRECT r;
r.left = e.x - 5;
r.top = e.y - 5;
r.right = e.x + 5;
r.bottom = e.y + 5;
pActiveView.ScreenDisplay.DisplayTransformation.TransformRect(pEnv, ref r, 4);
pEnv.SpatialReference = pActiveView.FocusMap.SpatialReference;
}
pGeo = pEnv as IGeometry;
MainMapControl.Map.SelectByShape(pGeo, null, false);
MainMapControl.Refresh(esriViewDrawPhase.esriViewGeoSelection, null, null);
//IEnvelope pEnv = MainMapControl.TrackRectangle();
//IGeometry pGeo = pEnv as IGeometry;
////矩形框若为空，即为点选时，对点范围进行扩展
//if (pEnv.IsEmpty == true)
//{
// tagRECT r;
// r.left = e.x - 5;
// r.top = e.y - 5;
// r.right = e.x + 5;
// r.bottom = e.y + 5;
// pActiveView.ScreenDisplay.DisplayTransformation.TransformRect(pEnv, ref r, 4);
// pEnv.SpatialReference = pActiveView.FocusMap.SpatialReference;
//}
//pGeo = pEnv as IGeometry;
//MainMapControl.Map.SelectByShape(pGeo, null, false);
//MainMapControl.Refresh(esriViewDrawPhase.esriViewGeoSelection, null, null);
break;
case "ExportRegion":
// 删除视图中的数据
MainMapControl.ActiveView.GraphicsContainer.DeleteAllElements();
MainMapControl.ActiveView.Refresh();
IPolygon polygon = DrawPolygon(MainMapControl);
if (polygon == null)
{
return;
}
ExportMap.AddElement(polygon, MainMapControl.ActiveView);
if (FrmExpMap == null || FrmExpMap.IsDisposed)
{
FrmExpMap = new FormExportMap(MainMapControl);
}
FrmExpMap.IsRegion = true;
FrmExpMap.GetGometry = polygon as IGeometry;
FrmExpMap.Show();
FrmExpMap.Activate();
break;
case "TxtSymbol":
TxtSymbol(e);
break;
default:
break;
}
}
else if (e.button == 2)
{
pMouseOperate = "";
MainMapControl.MousePointer = esriControlsMousePointer.esriPointerDefault;
}
}
private void DelVertexNode(IPoint pPnt)
{
try
{
IFeatureLayer pFeaturelayer = m_EngineEditLayers.TargetLayer;
IActiveView pActiveView = m_activeView;
IPoint pPoint = pPnt;
if (pFeaturelayer.FeatureClass == null)
{
return;
}
//如果不是面状地物则退出
if (pFeaturelayer.FeatureClass.ShapeType != esriGeometryType.esriGeometryEnvelope &&
pFeaturelayer.FeatureClass.ShapeType != esriGeometryType.esriGeometryPolygon &&
pFeaturelayer.FeatureClass.ShapeType != esriGeometryType.esriGeometryLine &&
pFeaturelayer.FeatureClass.ShapeType != esriGeometryType.esriGeometryPolyline)
{
return;
}
IGeometry pGeo = null;
IFeature pSelFeature = null;
pSelFeature = EditVertexClass.GetSelectedFeature(pFeaturelayer);
//是否有选中的几何体
if (pSelFeature == null)
{
return;
}
pGeo = pSelFeature.ShapeCopy;
double pSrchDis = 0;
double pHitDis = 0;
pSrchDis = pActiveView.Extent.Width / 200;
pPoint.Z = 0;
int pIndex = 0;
IElement pElement = null;
IHitTest pHtTest = null;
bool pBoolHitTest = false;
IPoint pPtHit = null;
IPointCollection pPointCol = null;
IPolygon pPolygon = null;
IPolyline pPyline = null;
bool bRightZSide = true;
int pInt = 0;
m_EngineEditor.StartOperation();
//删除面状要素的节点
if (pFeaturelayer.FeatureClass.ShapeType == esriGeometryType.esriGeometryPolygon ||
pFeaturelayer.FeatureClass.ShapeType == esriGeometryType.esriGeometryEnvelope)
{
pElement = new PolygonElement();
pElement.Geometry = pSelFeature.Shape;
IPolygon pPoly = null;
pPoly = pElement.Geometry as IPolygon;
pHtTest = pPoly as IHitTest;
pBoolHitTest = pHtTest.HitTest(pPoint, pSrchDis, esriGeometryHitPartType.esriGeometryPartVertex,
pPtHit, ref pHitDis, ref pInt, ref pIndex, ref bRightZSide);
if (pBoolHitTest == false)
{
return;
}
EditVertexClass.pHitPnt = pPtHit;
pPointCol = pSelFeature.ShapeCopy as IPointCollection;
//如果多边形的节点只有3个则不能再删除了
if (pPointCol.PointCount <= 4)
{
MessageBox.Show("多边形的节点至少需要3个!", "警告", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return;
}
//顶点删除
pPointCol.RemovePoints(pIndex, 1);
pPolygon = pPointCol as IPolygon;
pPolygon.Close();
pSelFeature.Shape = pPolygon;
pSelFeature.Store();
}
//删除线状要素的节点
else if (pFeaturelayer.FeatureClass.ShapeType == esriGeometryType.esriGeometryPolyline ||
pFeaturelayer.FeatureClass.ShapeType == esriGeometryType.esriGeometryLine)
{
pElement = new LineElement();
pElement.Geometry = pSelFeature.Shape;
IPolyline pPolyLine = default(IPolyline);
pPolyLine = pElement.Geometry as IPolyline;
pHtTest = pPolyLine as IHitTest;
pBoolHitTest = pHtTest.HitTest(pPoint, pSrchDis, esriGeometryHitPartType.esriGeometryPartVertex,
pPtHit, ref pHitDis, ref pInt, ref pIndex, ref bRightZSide);
if (pBoolHitTest == false)
{
return;
}
EditVertexClass.pHitPnt = pPtHit;
pPointCol = pSelFeature.ShapeCopy as IPointCollection;
//如果Polyline节点只有2个则不能再删除了
if (pPointCol.PointCount <= 2)
{
MessageBox.Show("线的节点至少需要2个!", "警告", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return;
}
//顶点删除
pPointCol.RemovePoints(pIndex, 1);
pPyline = pPointCol as IPolyline;
pSelFeature.Shape = pPyline;
pSelFeature.Store();
}
//与选中点坐标相同的节点都删除
for (int i = 0; i <= pPointCol.PointCount - 1; i++)
{
if (i > pPointCol.PointCount - 1)
{
break;
}
if (pPointCol.get_Point(i).X == pPoint.X & pPointCol.get_Point(i).Y == pPoint.Y)
{
pPointCol.RemovePoints(i, 1);
i = i - 1;
}
}
//停止编辑
m_EngineEditor.StopOperation("DelVertexTool");
//显示顶点
EditVertexClass.ShowAllVertex(pFeaturelayer);
m_activeView.Refresh();
}
catch (Exception ex)
{
m_activeView.Refresh();
}
}
private void createpolygon(IPointCollection ippoints)
{
ISegmentCollection ppath = new PathClass();
IGeometryCollection ppolyline = new PolylineClass();
if (ippoints.PointCount >= 3)
{
int i;
object o = Type.Missing;
if (ippoints.PointCount >= 4)
{
ippoints.RemovePoints(ippoints.PointCount - 2, 1);
}
ippoints.AddPoint(ippoints.get_Point(0));
for (i = 0; i < ippoints.PointCount - 1; i++)
{
ILine pline = new LineClass();
pline.PutCoords(ippoints.get_Point(i), ippoints.get_Point(i + 1));
ISegment psegment = pline as ISegment;
ppath.AddSegment(psegment, ref o, ref o);
ppolyline.AddGeometry(ppath as IGeometry, ref o, ref o);
}
ipPolyResult = ppolyline as IPolyline;
ISegmentCollection pRing = new RingClass();
IGeometryCollection pGeometryColl = new PolygonClass();
for (int j = 0; j < ppolyline.GeometryCount; j++)
{
pRing.AddSegmentCollection(ppolyline.get_Geometry(j) as ISegmentCollection);
pGeometryColl.AddGeometry(pRing as IGeometry, ref o, ref o);
}
ipolygon = pGeometryColl as IPolygon;
}
}