/// <summary>
/// This is the required call to start
/// the mouse receiving interrupts.
/// </summary>
public override void Initialize()
{
SendCommand(Command.Reset);
mPS2Controller.WaitForDeviceReset();
if (mMouseID == 0)
{
mMouseID = TryToEnableScrollWheel();
mDebugger.SendInternal("(PS/2 Mouse) Mouse ID: " + mMouseID);
if (mMouseID == 3)
{
mMouseID = TryToEnableAdditionalButtons();
}
mDebugger.SendInternal("(PS/2 Mouse) Mouse ID: " + mMouseID);
}
//SendCommand(Command.SetDefaults);
//mPS2Controller.WaitForAck();
INTs.SetIrqHandler(12, HandleMouse);
SendCommand(Command.EnablePacketStreaming);
mPS2Controller.WaitForAck();
}
/// <summary>
/// This is the required call to start
/// the mouse receiving interrupts.
/// </summary>
public void Initialize(uint screenWidth, uint screenHeight)
{
ScreenWidth = screenWidth;
ScreenHeight = screenHeight;
////enable mouse
WaitSignal();
BaseIOGroups.Mouse.p64.Byte = (byte)0xA8;
//// enable interrupt
WaitSignal();
BaseIOGroups.Mouse.p64.Byte = (byte)0x20;
WaitData();
//byte status1 = (byte)(BaseIOGroups.Mouse.p60.Byte);
byte status = (byte)(BaseIOGroups.Mouse.p60.Byte | 2);
WaitSignal();
BaseIOGroups.Mouse.p64.Byte = (byte)0x60;
WaitSignal();
BaseIOGroups.Mouse.p60.Byte = (byte)status;
////default
Write(0xF6);
Read(); //Acknowledge
////Enable the mouse
Write(0xF4);
Read(); //Acknowledge
//Set the IRQ 12, to the method HandleMouse
INTs.SetIrqHandler(12, HandleMouse);
}
/// <summary>
/// This is the required call to start
/// the mouse receiving interrupts.
/// </summary>
public static void Initialize()
{
////enable mouse
WaitSignal();
g.p64.Byte = (byte)0xA8;
//// enable interrupt
WaitSignal();
g.p64.Byte = (byte)0x20;
WaitData();
//byte status1 = (byte)(g.p60.Byte);
byte status = (byte)(g.p60.Byte | 2);
WaitSignal();
g.p64.Byte = (byte)0x60;
WaitSignal();
g.p60.Byte = (byte)status;
////default
Write(0xF6);
Read(); //Acknowledge
////Enable the mouse
Write(0xF4);
Read(); //Acknowledge
INTs.SetIrqHandler(12, HandleMouse);
//Console.WriteLine("INSTALLED");
}
/// <summary>
/// Check if ATAPI-speclevel device is on Primary or Secondary channel,
/// and register the appropriate interrupt
/// </summary>
public void Init()
{
if (Primary)
{
INTs.SetIrqHandler(0x0E, HandleIRQ);
}
else
{
INTs.SetIrqHandler(0x0F, HandleIRQ);
}
IO.Control.Byte = 0; //Enable IRQs
}
public override void Initialize()
{
SendCommand(Command.Reset);
mPS2Controller.WaitForDeviceReset();
//VMWare doesn't support the Get/SetScanCode command
//mDebugger.SendInternal("(PS/2 Keyboard) Current scan code set: " + GetScanCodeSet());
//SetScanCodeSet(1);
//mDebugger.SendInternal("(PS/2 Keyboard) Current scan code set: " + GetScanCodeSet());
INTs.SetIrqHandler(1, HandleIRQ);
SendCommand(Command.EnableScanning);
Global.mDebugger.SendInternal("(PS/2 Keyboard) Initialized");
}
public Intel8254X(PCIDevice dev)
{
this.dev = dev;
dev.EnableDevice();
BAR0 = (uint)(dev.BAR0 & (~3));
INTs.SetIrqHandler(dev.InterruptLine, HandleIRQ);
var HasEEPROM = DetectEEPROM();
//Read the mac address
if (!HasEEPROM)
{
address = new MACAddress(new byte[] { Read1ByteRegister(BAR0 + 0x5400), Read1ByteRegister(BAR0 + 0x5401), Read1ByteRegister(BAR0 + 0x5402), Read1ByteRegister(BAR0 + 0x5403), Read1ByteRegister(BAR0 + 0x5404), Read1ByteRegister(BAR0 + 0x5405) });
}
else
{
var firstWord = ReadROM(0);
var secondWord = ReadROM(1);
var thirdWord = ReadROM(2);
address = new MACAddress(new byte[] {
(byte)(firstWord & 0xFF),
(byte)(firstWord >> 8),
(byte)(secondWord & 0xFF),
(byte)(secondWord >> 8),
(byte)(thirdWord & 0xFF),
(byte)(thirdWord >> 8)
});
}
LinkUp();
//zero out the MTA (multicast tabel array)
for (int i = 0; i < 0x80; i++)
{
WriteRegister((ushort)(0x5200 + i * 4), 0);
}
//Enable interupts
WriteRegister(REG_IMASK, 0x1F6DC);
WriteRegister(REG_IMASK, 0xFF & ~4);
ReadRegister(0xC0);
RXInitialize();
TXInitialize();
}
public override void Initialize()
{
SendCommand(Command.Reset);
mPS2Controller.WaitForDeviceReset();
if (PCI.GetDevice((VendorID)0x80EE, (DeviceID)0xBEEF) == null && PCI.GetDevice((VendorID)0x15AD, (DeviceID)0x0405) == null)
{
SetScanCodeSet(1);
}
//VMware doesn't support the Get/SetScanCode command
//mDebugger.SendInternal("(PS/2 Keyboard) Current scan code set: " + GetScanCodeSet());
//SetScanCodeSet(1);
//mDebugger.SendInternal("(PS/2 Keyboard) Current scan code set: " + GetScanCodeSet());
INTs.SetIrqHandler(1, HandleIRQ);
SendCommand(Command.EnableScanning);
Global.mDebugger.SendInternal("(PS/2 Keyboard) Initialized");
}
public void Enable()
{
MouseManager.X = 0;
MouseManager.Y = 0;
INTs.SetIrqHandler(0x0C, HandleInterrupt);
commandPort.Byte = 0xA8;
commandPort.Byte = 0x20;
byte status = (byte)(dataPort.Byte | 2);
commandPort.Byte = 0x60;
dataPort.Byte = status;
commandPort.Byte = 0xD4;
dataPort.Byte = 0xF4;
_ = dataPort.Byte;
for (int i = 0; i < 3; i++)
{
buffer.Add(0x00);
}
}
public RTL8139(PCIDevice device)
{
if (device == null)
{
throw new ArgumentException("PCI Device is null. Unable to get Realtek 8139 card");
}
pciCard = device;
Base = device.BaseAddressBar[0].BaseAddress;
// We are handling this device
pciCard.Claimed = true;
// Setup interrupt handling
INTs.SetIrqHandler(device.InterruptLine, HandleNetworkInterrupt);
// Get IO Address from PCI Bus
// Enable the card
pciCard.EnableDevice();
// Turn on the card
OutB(Base + 0x52, 0x01);
//Do a software reset
SoftwareReset();
// Get the MAC Address
byte[] eeprom_mac = new byte[6];
for (uint b = 0; b < 6; b++)
{
eeprom_mac[b] = Inb(Base + b);
}
this.mac = new MACAddress(eeprom_mac);
// Get a receive buffer and assign it to the card
rxBuffer = new ManagedMemoryBlock(RxBufferSize + 2048 + 16, 4);
RBStartRegister = rxBuffer.Offset;
// Setup receive Configuration
RecvConfigRegister = 0xF381;
// Setup Transmit Configuration
TransmitConfigRegister = 0x3000300;
// Setup Interrupts
IntMaskRegister = 0x7F;
IntStatusRegister = 0xFFFF;
// Setup our Receive and Transmit Queues
mRecvBuffer = new Queue <byte[]>();
mTransmitBuffer = new Queue <byte[]>();
}
public PIT()
{
INTs.SetIrqHandler(0x00, HandleIRQ);
T0Countdown = 65535;
}
protected override void Initialize()
{
INTs.SetIrqHandler(0x01, HandleIRQ);
}
public static void Init()
{
INTs.SetIrqHandler(0x07, HandleIRQ2);
SoftReset();
InitRxBuffer();
}
/// <summary>
/// Creates a new instance of the <see cref="AC97"/> class, with the
/// given buffer size.
/// </summary>
/// <param name="bufferSize">The buffer size in samples to use. This value cannot be an odd number, as per the AC97 specification.</param>
/// <exception cref="ArgumentException">Thrown when the given buffer size is invalid.</exception>
/// <exception cref="InvalidOperationException">Thrown when no AC97-compatible sound card is present.</exception>
private AC97(ushort bufferSize)
{
if (bufferSize % 2 != 0)
{
// As per the AC97 specification, the buffer size cannot be odd.
// (1.2.4.2 PCM Buffer Restrictions, Intel document 302349-003)
throw new ArgumentException("The buffer size must be an even number.", nameof(bufferSize));
}
PCIDevice pci = Cosmos.HAL.PCI.GetDeviceClass(
ClassID.MultimediaDevice, // 0x04
(SubclassID)0x01 // 0x01
);
if (pci == null || !pci.DeviceExists || pci.InterruptLine > 0xF)
{
throw new InvalidOperationException("No AC97-compatible device could be found.");
}
PCI = pci; // Expose PCI device to the public API
pci.EnableBusMaster(true);
pci.EnableMemory(true);
pci.EnableDevice(); // enable I/O space
INTs.SetIrqHandler(pci.InterruptLine, HandleInterrupt);
ushort NAMbar = (ushort)pci.BaseAddressBar[0].BaseAddress; // Native Audio Mixer
ushort NABMbar = (ushort)pci.BaseAddressBar[1].BaseAddress; // Native Audio Bus Master
pTransferControl = new IOPort((ushort)(NABMbar + 0x1B));
pMasterVolume = new IOPort((ushort)(NAMbar + 0x02));
pPCMOutVolume = new IOPort((ushort)(NAMbar + 0x18));
pBufferDescriptors = new IOPort((ushort)(NABMbar + 0x10));
pTransferStatus = new IOPort((ushort)(NABMbar + 0x16));
pLastValidEntry = new IOPort((ushort)(NABMbar + 0x15));
pGlobalControl = new IOPort((ushort)(NABMbar + 0x2C));
pResetRegister = new IOPort((ushort)(NAMbar + 0x00));
// Reset device
pGlobalControl.Byte = 0x2;
pResetRegister.DWord = 0xDEADBEEF; // any value will do here
// Reset PCM out
uint polls = 0; // The amount we polled the device for a reset
pTransferControl.Byte = (byte)(pTransferControl.Byte | TC_TRANSFER_RESET);
while ((pTransferControl.Byte & TC_TRANSFER_RESET) != 0 && polls < RESET_POLL_LIMIT)
{
// Wait until the byte is cleared
polls++;
}
// The device hasn't responded to our reset request. Probably not a fully-compatible AC97 card.
if (polls >= RESET_POLL_LIMIT)
{
throw new InvalidOperationException("No AC97-compatible device could be found - the reset timeout has expired.");
}
// Volume
pMasterVolume.Word = CreateMixerVolumeValue(AC97_VOLUME_MAX, AC97_VOLUME_MAX, false);
pPCMOutVolume.Word = CreateMixerVolumeValue(AC97_VOLUME_MAX, AC97_VOLUME_MAX, false);
// Create all needed buffers
CreateBuffers(bufferSize);
// Initialization done - driver can now be activated by using Enable()
}
public AMDPCNetII(PCIDevice device)
: base()
{
if (device == null)
{
throw new ArgumentException("PCI Device is null. Unable to get AMD PCNet card");
}
this.pciCard = device;
this.pciCard.Claimed = true;
this.pciCard.EnableDevice();
this.io = new AMDPCNetIIIOGroup((ushort)this.pciCard.BaseAddressBar[0].BaseAddress);
this.io.RegisterData.DWord = 0;
// Get the EEPROM MAC Address and set it as the devices MAC
byte[] eeprom_mac = new byte[6];
UInt32 result = io.MAC1.DWord;
eeprom_mac[0] = BinaryHelper.GetByteFrom32bit(result, 0);
eeprom_mac[1] = BinaryHelper.GetByteFrom32bit(result, 8);
eeprom_mac[2] = BinaryHelper.GetByteFrom32bit(result, 16);
eeprom_mac[3] = BinaryHelper.GetByteFrom32bit(result, 24);
result = io.MAC2.DWord;
eeprom_mac[4] = BinaryHelper.GetByteFrom32bit(result, 0);
eeprom_mac[5] = BinaryHelper.GetByteFrom32bit(result, 8);
mac = new MACAddress(eeprom_mac);
mInitBlock = new ManagedMemoryBlock(28, 4);
mRxDescriptor = new ManagedMemoryBlock(256, 16);
mTxDescriptor = new ManagedMemoryBlock(256, 16);
mInitBlock.Write32(0x00, (0x4 << 28) | (0x4 << 20));
mInitBlock.Write32(0x04,
(UInt32)(eeprom_mac[0] | (eeprom_mac[1] << 8) | (eeprom_mac[2] << 16) | (eeprom_mac[3] << 24)));
mInitBlock.Write32(0x08, (UInt32)(eeprom_mac[4] | (eeprom_mac[5] << 8)));
mInitBlock.Write32(0x0C, 0x0);
mInitBlock.Write32(0x10, 0x0);
mInitBlock.Write32(0x14, mRxDescriptor.Offset);
mInitBlock.Write32(0x18, mTxDescriptor.Offset);
InitializationBlockAddress = mInitBlock.Offset;
SoftwareStyleRegister = 0x03;
mRxBuffers = new List <ManagedMemoryBlock>();
mTxBuffers = new List <ManagedMemoryBlock>();
for (uint rxd = 0; rxd < 16; rxd++)
{
uint xOffset = rxd * 16;
ManagedMemoryBlock buffer = new ManagedMemoryBlock(2048);
mRxDescriptor.Write32(xOffset + 8, buffer.Offset);
UInt16 buffer_len = (UInt16)(~buffer.Size);
buffer_len++;
UInt32 flags = (UInt32)(buffer_len & 0x0FFF) | 0xF000 | 0x80000000;
mRxDescriptor.Write32(xOffset + 4, flags);
mRxBuffers.Add(buffer);
}
for (uint txd = 0; txd < 16; txd++)
{
uint xOffset = txd * 16;
ManagedMemoryBlock buffer = new ManagedMemoryBlock(2048);
mTxDescriptor.Write32(xOffset + 8, buffer.Offset);
mTxBuffers.Add(buffer);
}
mNextTXDesc = 0;
// Setup our Receive and Transmit Queues
mTransmitBuffer = new Queue <byte[]>();
mRecvBuffer = new Queue <byte[]>();
INTs.SetIrqHandler(device.InterruptLine, HandleNetworkInterrupt);
}