public IIfcElement CreateExtrusion(
ref List <IIfcProduct> elements,
List <Point> points,
List <double> chamfers,
double height,
Guid guid)
{
IfcAxis2Placement plateLocation = new IfcAxis2Placement(IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(this.Position.get_X(), this.Position.get_Y(), this.Position.get_Z()), this.DirZ, this.DirY));
IIfcAxis2Placement3D axis2Placement3D = IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(0.0, 0.0, 0.0), IfcTools.CreateDirection(0.0, 1.0, 0.0), IfcTools.CreateDirection(0.0, 0.0, 1.0));
IIfcProductDefinitionShape productDefinitionShape = IfcTools.IfcDatabase.CreateIfcProductDefinitionShape((IfcLabel)null, (IfcText)null, new List <IIfcRepresentation>()
{
IfcTools.CreateShapeRepresentation((IIfcRepresentationItem)IfcTools.CreateExtrudedAreaSolid((IIfcProfileDef)IfcTools.CreateArbitraryClosedProfileDef(IfcProfileTypeEnum.IFC_AREA, (IIfcCurve)IfcTools.CreateChamferedCurvedPolyline(points, chamfers)), axis2Placement3D, IfcTools.CreateDirection(0.0, 0.0, 1.0), (IfcPositiveLengthMeasure)height), "Body", "SweptSolid")
});
IIfcPlate plate = IfcTools.CreatePlate(plateLocation, (IIfcProductRepresentation)productDefinitionShape, guid);
IfcTools.AddQuantities((IIfcObject)plate);
IfcTools.AddColorToElement((IIfcElement)plate, "brown");
IfcTools.AddMaterialToElement(new List <IIfcRoot>()
{
(IIfcRoot)plate
}, "Undefined");
if (!string.IsNullOrEmpty(this.Reference))
{
Dictionary <string, object> attributes = new Dictionary <string, object>()
{
{
"PDMS_ID",
(object)(IfcLabel)this.Reference
}
};
IfcTools.AddProperties((IIfcObject)plate, "PDMS Common", attributes);
}
elements.Add((IIfcProduct)plate);
return((IIfcElement)plate);
}
public IXbimGeometryObject Moved(IXbimGeometryObject geometryObject, IIfcAxis2Placement3D placement)
{
using (new Tracer(LogHelper.CurrentFunctionName(), this._logger, geometryObject))
{
return(_engine.Moved(geometryObject, placement));
}
}
public IIfcElement CreateCylinder(
ref List <IIfcProduct> elements,
double height,
double radius,
Guid guid)
{
IfcAxis2Placement beamLocation = new IfcAxis2Placement(IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(this.Position.get_X(), this.Position.get_Y(), this.Position.get_Z()), this.DirZ, this.DirY));
IIfcAxis2Placement2D axis2Placement2D = IfcTools.CreateAxis2Placement2D(IfcTools.CreatePoint(0.0, 0.0), IfcTools.CreateDirection(1.0, 0.0));
IIfcAxis2Placement3D axis2Placement3D = IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(0.0, 0.0, -height / 2.0), IfcTools.CreateDirection(0.0, 0.0, 1.0), IfcTools.CreateDirection(0.0, -1.0, 0.0));
IIfcProductDefinitionShape productDefinitionShape = IfcTools.IfcDatabase.CreateIfcProductDefinitionShape((IfcLabel)null, (IfcText)null, new List <IIfcRepresentation>()
{
IfcTools.CreateShapeRepresentation((IIfcRepresentationItem)IfcTools.CreateExtrudedAreaSolid((IIfcProfileDef)IfcTools.IfcDatabase.CreateIfcCircleProfileDef(new IfcProfileTypeEnum?(IfcProfileTypeEnum.IFC_AREA), (IfcLabel)string.Empty, axis2Placement2D, (IfcPositiveLengthMeasure)radius), axis2Placement3D, IfcTools.CreateDirection(0.0, 0.0, 1.0), (IfcPositiveLengthMeasure)height), "Body", "SweptSolid")
});
IIfcBeam beam = IfcTools.CreateBeam(beamLocation, (IIfcProductRepresentation)productDefinitionShape, guid);
IfcTools.AddQuantities((IIfcObject)beam);
IfcTools.AddColorToElement((IIfcElement)beam, "yellow");
IfcTools.AddMaterialToElement(new List <IIfcRoot>()
{
(IIfcRoot)beam
}, "Undefined");
if (!string.IsNullOrEmpty(this.Reference))
{
Dictionary <string, object> attributes = new Dictionary <string, object>()
{
{
"PDMS_ID",
(object)(IfcLabel)this.Reference
}
};
IfcTools.AddProperties((IIfcObject)beam, "PDMS Common", attributes);
}
elements.Add((IIfcProduct)beam);
return((IIfcElement)beam);
}
public IIfcRevolvedAreaSolid CreateSolid(
IIfcProfileDef profile,
double radius,
double angle)
{
IIfcAxis1Placement ifcAxis1Placement = IfcTools.IfcDatabase.CreateIfcAxis1Placement(IfcTools.CreatePoint(radius, 0.0, 0.0), IfcTools.CreateDirection(0.0, 1.0, 0.0));
IIfcAxis2Placement3D axis2Placement3D = IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(this.Position.get_X(), this.Position.get_Y(), this.Position.get_Z()), this.DirY, this.DirX);
return(IfcTools.CreateRevolvedAreaSolid(profile, axis2Placement3D, ifcAxis1Placement, (IfcPlaneAngleMeasure)angle));
}
public static XbimMatrix3D ToMatrix3D(IIfcAxis2Placement3D ax)
{
var origin = ToXbimPoint3D(ax.Location);
var zAxis = ax.Axis == null ? new XbimVector3D(0, 0, 1) : ToXbimVector3D(ax.Axis).Normalized();
var xAxis = ax.RefDirection == null ? new XbimVector3D(1, 0, 0) : ToXbimVector3D(ax.RefDirection).Normalized();
var yAxis = zAxis.CrossProduct(xAxis);
return(new XbimMatrix3D(xAxis.X, xAxis.Y, xAxis.Z, 0, yAxis.X, yAxis.Y, yAxis.Z, 0,
zAxis.X, zAxis.Y, zAxis.Z, 0, origin.X, origin.Y, origin.Z, 1));
}
public IIfcBeam CreateStraight(
ref List <IIfcProduct> elements,
IIfcProfileDef profile,
double length,
Guid guid)
{
IfcAxis2Placement beamLocation = new IfcAxis2Placement(IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(this.Position.get_X(), this.Position.get_Y(), this.Position.get_Z()), this.DirZ, this.DirX));
IIfcAxis2Placement3D axis2Placement3D = IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(0.0, 0.0, 0.0), IfcTools.CreateDirection(0.0, 0.0, 1.0), IfcTools.CreateDirection(1.0, 0.0, 0.0));
IIfcProductDefinitionShape productDefinitionShape = IfcTools.IfcDatabase.CreateIfcProductDefinitionShape((IfcLabel)null, (IfcText)null, new List <IIfcRepresentation>()
{
IfcTools.CreateShapeRepresentation((IIfcRepresentationItem)IfcTools.CreateExtrudedAreaSolid(profile, axis2Placement3D, IfcTools.CreateDirection(0.0, 0.0, 1.0), (IfcPositiveLengthMeasure)length), "Body", "SweptSolid")
});
return(IfcTools.CreateBeam(beamLocation, (IIfcProductRepresentation)productDefinitionShape, guid));
}
public static XbimMatrix3D ToMatrix3D(this IIfcAxis2Placement3D axis3)
{
if (axis3.RefDirection != null && axis3.Axis != null)
{
var za = new XbimVector3D(axis3.Axis.X, axis3.Axis.Y, axis3.Axis.Z);
za = za.Normalized();
var xa = new XbimVector3D(axis3.RefDirection.X, axis3.RefDirection.Y, axis3.RefDirection.Z);
xa = xa.Normalized();
XbimVector3D ya = XbimVector3D.CrossProduct(za, xa);
ya = ya.Normalized();
return(new XbimMatrix3D(xa.X, xa.Y, xa.Z, 0, ya.X, ya.Y, ya.Z, 0, za.X, za.Y, za.Z, 0, axis3.Location.X,
axis3.Location.Y, axis3.Location.Z, 1));
}
return(new XbimMatrix3D(1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, axis3.Location.X, axis3.Location.Y,
axis3.Location.Z, 1));
}
public IIfcBeam CreateCurve(
ref List <IIfcProduct> elements,
IIfcProfileDef profile,
double radius,
double angle,
Guid guid)
{
IfcAxis2Placement beamLocation = new IfcAxis2Placement(IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(this.Position.get_X(), this.Position.get_Y(), this.Position.get_Z()), this.DirX, this.DirZ));
IIfcAxis2Placement3D axis2Placement3D = IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(0.0, 0.0, 0.0), IfcTools.CreateDirection(1.0, 0.0, 0.0), IfcTools.CreateDirection(0.0, 1.0, 0.0));
IIfcProductDefinitionShape productDefinitionShape = IfcTools.IfcDatabase.CreateIfcProductDefinitionShape((IfcLabel)null, (IfcText)null, new List <IIfcRepresentation>()
{
IfcTools.CreateShapeRepresentation((IIfcRepresentationItem)IfcTools.CreateCurvedBeam(profile, axis2Placement3D, IfcTools.IfcDatabase.CreateIfcAxis1Placement(IfcTools.CreatePoint(0.0, 0.0, 0.0), IfcTools.CreateDirection(1.0, 0.0, 0.0)), (IfcPlaneAngleMeasure)angle), "Body", "SweptSolid")
});
return(IfcTools.CreateBeam(beamLocation, (IIfcProductRepresentation)productDefinitionShape, guid));
}
public IIfcElement CreateSlopedCylinder(
ref List <IIfcProduct> elements,
double height,
double radius,
double botX,
double botY,
double topX,
double topY,
Guid guid)
{
double num1 = Math.Max(radius * Math.Tan(Math.Abs(botX * Math.PI / 180.0)), radius * Math.Tan(Math.Abs(botY * Math.PI / 180.0)));
double num2 = Math.Max(radius * Math.Tan(Math.Abs(topX * Math.PI / 180.0)), radius * Math.Tan(Math.Abs(topY * Math.PI / 180.0)));
IfcAxis2Placement beamLocation = new IfcAxis2Placement(IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(this.Position.get_X(), this.Position.get_Y(), this.Position.get_Z()), this.DirZ, this.DirY));
IIfcAxis2Placement2D axis2Placement2D = IfcTools.CreateAxis2Placement2D(IfcTools.CreatePoint(0.0, 0.0), IfcTools.CreateDirection(1.0, 0.0));
IIfcAxis2Placement3D axis2Placement3D = IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(0.0, 0.0, -height / 2.0 - num1), IfcTools.CreateDirection(0.0, 0.0, 1.0), IfcTools.CreateDirection(1.0, 0.0, 0.0));
IIfcExtrudedAreaSolid extrudedAreaSolid = IfcTools.CreateExtrudedAreaSolid((IIfcProfileDef)IfcTools.IfcDatabase.CreateIfcCircleProfileDef(new IfcProfileTypeEnum?(IfcProfileTypeEnum.IFC_AREA), (IfcLabel)string.Empty, axis2Placement2D, (IfcPositiveLengthMeasure)radius), axis2Placement3D, IfcTools.CreateDirection(0.0, 0.0, 1.0), (IfcPositiveLengthMeasure)(height + num1 + num2));
IIfcBooleanClippingResult booleanClippingResult1 = (IIfcBooleanClippingResult)null;
IIfcBooleanClippingResult booleanClippingResult2 = (IIfcBooleanClippingResult)null;
IIfcProductDefinitionShape productDefinitionShape = IfcTools.IfcDatabase.CreateIfcProductDefinitionShape((IfcLabel)null, (IfcText)null, new List <IIfcRepresentation>()
{
booleanClippingResult2 == null ? (booleanClippingResult1 == null ? IfcTools.CreateShapeRepresentation((IIfcRepresentationItem)extrudedAreaSolid, "Body", "SweptSolid") : IfcTools.CreateShapeRepresentation((IIfcRepresentationItem)booleanClippingResult1, "Body", "Clipping")) : IfcTools.CreateShapeRepresentation((IIfcRepresentationItem)booleanClippingResult2, "Body", "Clipping")
});
IIfcBeam beam = IfcTools.CreateBeam(beamLocation, (IIfcProductRepresentation)productDefinitionShape, guid);
IfcTools.AddQuantities((IIfcObject)beam);
IfcTools.AddColorToElement((IIfcElement)beam, "green");
IfcTools.AddMaterialToElement(new List <IIfcRoot>()
{
(IIfcRoot)beam
}, "Undefined");
if (!string.IsNullOrEmpty(this.Reference))
{
Dictionary <string, object> attributes = new Dictionary <string, object>()
{
{
"PDMS_ID",
(object)(IfcLabel)this.Reference
}
};
IfcTools.AddProperties((IIfcObject)beam, "PDMS Common", attributes);
}
elements.Add((IIfcProduct)beam);
return((IIfcElement)beam);
}
public IIfcElement CreateRevolution(
ref List <IIfcProduct> elements,
List <Point> points,
List <double> chamfers,
double angle,
Guid guid)
{
IIfcProfileDef profile = IfcTools.CreateProfile(points, chamfers, "REVO");
IfcAxis2Placement beamLocation = new IfcAxis2Placement(IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(this.Position.get_X(), this.Position.get_Y(), this.Position.get_Z()), this.DirY, this.DirX));
IIfcAxis2Placement3D axis2Placement3D = IfcTools.CreateAxis2Placement3D(IfcTools.CreatePoint(0.0, 0.0, 0.0), IfcTools.CreateDirection(0.0, 1.0, 0.0), IfcTools.CreateDirection(1.0, 0.0, 0.0));
IIfcProductDefinitionShape productDefinitionShape = IfcTools.IfcDatabase.CreateIfcProductDefinitionShape((IfcLabel)null, (IfcText)null, new List <IIfcRepresentation>()
{
IfcTools.CreateShapeRepresentation((IIfcRepresentationItem)IfcTools.CreateCurvedBeam(profile, axis2Placement3D, IfcTools.IfcDatabase.CreateIfcAxis1Placement(IfcTools.CreatePoint(0.0, 0.0, 0.0), IfcTools.CreateDirection(1.0, 0.0, 0.0)), (IfcPlaneAngleMeasure)angle), "Body", "SweptSolid")
});
IIfcBeam beam = IfcTools.CreateBeam(beamLocation, (IIfcProductRepresentation)productDefinitionShape, guid);
IfcTools.AddQuantities((IIfcObject)beam);
IfcTools.AddColorToElement((IIfcElement)beam, "beige");
IfcTools.AddMaterialToElement(new List <IIfcRoot>()
{
(IIfcRoot)beam
}, "Undefined");
if (!string.IsNullOrEmpty(this.Reference))
{
Dictionary <string, object> attributes = new Dictionary <string, object>()
{
{
"PDMS_ID",
(object)(IfcLabel)this.Reference
}
};
IfcTools.AddProperties((IIfcObject)beam, "PDMS Common", attributes);
}
elements.Add((IIfcProduct)beam);
return((IIfcElement)beam);
}
public IfcLocationData(string path)
{
using (IfcStore model = IfcStore.Open(path))
{
if (model.SchemaVersion == XbimSchemaVersion.Ifc2X3)
{
Schema = "Ifc 2x3";
SchemaIsSupported = true;
}
else if (model.SchemaVersion == XbimSchemaVersion.Ifc4)
{
Schema = "Ifc4";
SchemaIsSupported = false;
return;
}
else
{
Schema = model.SchemaVersion.ToString();
SchemaIsSupported = false;
return;
}
IIfcProject project = model.Instances.FirstOrDefault <IIfcProject>();
string applicationFullname = project.OwnerHistory.OwningApplication.ApplicationFullName;
if (applicationFullname == null)
{
AuthoringTool = "N/A";
}
else
{
AuthoringTool = project.OwnerHistory.OwningApplication.ApplicationFullName;
}
IIfcSIUnit lengtUnit = project.UnitsInContext.Units.FirstOrDefault <IIfcSIUnit>(q => q.UnitType == IfcUnitEnum.LENGTHUNIT);
LengthUnit = lengtUnit.FullName;
IIfcSite site = model.Instances.FirstOrDefault <IIfcSite>();
if (site.RefElevation.HasValue)
{
refElevation = site.RefElevation.Value;
}
else
{
refElevation = double.NaN;
}
IIfcLocalPlacement placement = site.ObjectPlacement as IIfcLocalPlacement;
IIfcAxis2Placement3D axis2Placement = placement.RelativePlacement as IIfcAxis2Placement3D;
double x = axis2Placement.RefDirection.DirectionRatios.GetAt(0);
double y = axis2Placement.RefDirection.DirectionRatios.GetAt(1);
double angle = 360 - Math.Atan2(y, x) * 180 / Math.PI;
if (angle.Equals(360))
{
angle = 0;
}
Orientation = angle;
EW = axis2Placement.Location.Coordinates.GetAt(0);
NS = axis2Placement.Location.Coordinates.GetAt(1);
elevation = axis2Placement.Location.Coordinates.GetAt(2);
}
}
public IXbimGeometryObject Create(IIfcGeometricRepresentationItem ifcRepresentation, IIfcAxis2Placement3D objectLocation, ILogger logger)
{
try
{
using (new Tracer(LogHelper.CurrentFunctionName(), this._logger, ifcRepresentation))
{
return(_engine.Create(ifcRepresentation, objectLocation, logger));
}
}
catch (Exception e)
{
(logger ?? _logger).LogError("EE001: Failed to create geometry #{0} of type {1}, {2}", ifcRepresentation.EntityLabel, ifcRepresentation.GetType().Name, e.Message);
return(null);
}
}
public IXbimGeometryObject Moved(IXbimGeometryObject geometryObject, IIfcAxis2Placement3D placement)
{
return(_engine.Moved(geometryObject, placement));
}
public IXbimGeometryObject Create(IIfcGeometricRepresentationItem ifcRepresentation, IIfcAxis2Placement3D objectLocation)
{
try
{
return(_engine.Create(ifcRepresentation, objectLocation));
}
catch (AccessViolationException e)
{
Logger.ErrorFormat("EE001: Failed to create geometry #{0} of type {1}, {2]", ifcRepresentation.EntityLabel, ifcRepresentation.GetType().Name, e.Message);
return(null);
}
}