private void UpdateDrawing(object obj, IDBManager dbmgr)
{
Drawing item = (Drawing)obj;
System.Data.Common.DbParameter param;
try
{
dbmgr.Open();
dbmgr.BeginTransaction();
// check to see if new object
if (item.dwg_id == 0)
{
// if id is null then new object
dbmgr.CreateParameters(3);
dbmgr.AddParameters(0, "@id", 0, true);
dbmgr.AddParameters(1, "@dwg_ref", item.dwg_ref);
dbmgr.AddParameters(2, "@dwg_rev", item.dwg_rev);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.DWGLIST_i");
// get item id
param = (System.Data.Common.DbParameter)dbmgr.Parameters.GetValue(0);
item.dwg_id = Convert.ToInt32(param.Value);
}
// otherwise update existing object
else
{
dbmgr.CreateParameters(5);
dbmgr.AddParameters(0, "@dwg_id", item.dwg_id);
dbmgr.AddParameters(1, "@dwg_ref", item.dwg_ref);
dbmgr.AddParameters(2, "@dwg_rev", item.dwg_rev);
dbmgr.AddParameters(3, "@dwg_type", item.dwg_type);
dbmgr.AddParameters(4, "@dwg_desc", item.dwg_desc);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.DWGLIST_u");
}
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
private void UpdateRoute(object obj, IDBManager dbmgr)
{
Route item = (Route)obj;
System.Data.Common.DbParameter param;
try
{
dbmgr.Open();
dbmgr.BeginTransaction();
// check to see if new object
if (item.node_id == 0)
{
// if id is null then new object
dbmgr.CreateParameters(2);
dbmgr.AddParameters(0, "@id", 0, true);
dbmgr.AddParameters(1, "@node", item.node);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.ROUTELIST_i");
// get item id
param = (System.Data.Common.DbParameter)dbmgr.Parameters.GetValue(0);
item.node_id = Convert.ToInt32(param.Value);
}
// otherwise update existing object
else
{
// update ROUTELIST table
dbmgr.CreateParameters(2);
dbmgr.AddParameters(0, "@node_id", item.node_id);
dbmgr.AddParameters(1, "@node", item.node);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.ROUTELIST_u");
}
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
// if there is problem with transaction roll back to original
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
private void DeleteFireRoom(object obj, IDBManager dbmgr)
{
FireRoom item = (FireRoom)obj;
try
{
dbmgr.Open(); // open database
dbmgr.BeginTransaction();
dbmgr.CreateParameters(1); // create required paramaters
dbmgr.AddParameters(0, "@rm_id", item.rm_id);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.FRLIST_d"); // execute stored procedure
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
// if there is problem with transaction roll back to original
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
private void UpdateFireRoom(object obj, IDBManager dbmgr)
{
FireRoom item = (FireRoom)obj;
System.Data.Common.DbParameter param;
try
{
dbmgr.Open();
dbmgr.BeginTransaction();
// check to see if new object
if (item.rm_id == 0)
{
// if id is null then new object
dbmgr.CreateParameters(4);
dbmgr.AddParameters(0, "@rm", item.rm);
dbmgr.AddParameters(1, "@id", 0, true);
dbmgr.AddParameters(2, "@fz_id", item.fz_id);
dbmgr.AddParameters(3, "@rm_desc", item.rm_desc);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.FRLIST_i");
// get item id
param = (System.Data.Common.DbParameter)dbmgr.Parameters.GetValue(1);
item.rm_id = Convert.ToInt32(param.Value);
}
// otherwise update existing object
else
{
// update FRLIST table
dbmgr.CreateParameters(11);
dbmgr.AddParameters(0, "@rm_id", item.rm_id);
dbmgr.AddParameters(1, "@rm", item.rm);
dbmgr.AddParameters(2, "@rm_desc", item.rm_desc);
dbmgr.AddParameters(3, "@bldg", item.bldg);
dbmgr.AddParameters(4, "@elev", item.elev);
dbmgr.AddParameters(5, "@fz_id", item.fz_id);
dbmgr.AddParameters(6, "@req", item.req);
dbmgr.AddParameters(7, "@supp", item.supp);
dbmgr.AddParameters(8, "@det", item.det);
dbmgr.AddParameters(9, "@dwg_id", item.dwg_id);
dbmgr.AddParameters(10, "@dwg_rev", item.dwg_rev);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.FRLIST_u");
}
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
// if there is problem with transaction roll back to original
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
// porcedure update incominginterlock
private void UpdateInterlock(object obj, IDBManager dbmgr)
{
CompIntlk item = (CompIntlk)obj;
try
{
dbmgr.Open(); // open database
dbmgr.CreateParameters(9); // create required paramaters
dbmgr.BeginTransaction();
dbmgr.AddParameters(0, "@comp_id", item.comp_id);
dbmgr.AddParameters(1, "@intlk_id", item.intlk_id);
dbmgr.AddParameters(2, "@device", item.device);
dbmgr.AddParameters(3, "@contacts", item.contacts);
dbmgr.AddParameters(4, "@note", item.note);
dbmgr.AddParameters(5, "@ssd_req", item.ssd_req);
dbmgr.AddParameters(6, "@pra_req", item.pra_req);
dbmgr.AddParameters(7, "@npo_req", item.npo_req);
dbmgr.AddParameters(8, "@cfp_req", item.cfp_req);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.COMPINTLKS_u"); // execute stored procedure
// save hisotry
SaveHistory(item, _oldobj, item.argUser.name, "COMPINTLKS", item.intlk, item.comp, dbmgr, _fieldlist);
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
// if there is problem with transaction roll back to original
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
// updates key safety function
private void UpdateKSF(object obj, IDBManager dbmgr)
{
CompKSF item = (CompKSF)obj;
try
{
dbmgr.Open(); // open database
dbmgr.CreateParameters(4); // create required paramaters
dbmgr.BeginTransaction();
dbmgr.AddParameters(0, "@comp_id", item.comp_id);
dbmgr.AddParameters(1, "@ksf_id", item.ksf_id);
dbmgr.AddParameters(2, "@mode_id", item.mode_id);
dbmgr.AddParameters(3, "@note", item.note);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.COMPKSF_u"); // execute stored procedure
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
// if there is problem with transaction roll back to original
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
// updates component
private void UpdateComponent(object obj, IDBManager dbmgr)
{
Component item = (Component)obj;
System.Data.Common.DbParameter new_comp_id;
try
{
dbmgr.Open();
dbmgr.BeginTransaction();
// check to see if new object
if (item.comp_id == 0)
{
// if id is null then create new object
dbmgr.CreateParameters(11);
dbmgr.AddParameters(0, "@id", 0, true);
dbmgr.AddParameters(1, "@comp", item.comp);
dbmgr.AddParameters(2, "@pri_sub", item.pri_sub);
dbmgr.AddParameters(3, "@unit_id", item.unit_id);
dbmgr.AddParameters(4, "@sys_id", item.sys_id);
dbmgr.AddParameters(5, "@comp_type_id", item.comp_type_id);
dbmgr.AddParameters(6, "@comp_desc", item.comp_desc);
dbmgr.AddParameters(7, "@ssd_req", item.ssd_req);
dbmgr.AddParameters(8, "@pra_req", item.pra_req);
dbmgr.AddParameters(9, "@npo_req", item.npo_req);
dbmgr.AddParameters(10, "@cfp_req", item.cfp_req);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.COMPLIST_i");
// get item id
new_comp_id = (System.Data.Common.DbParameter)dbmgr.Parameters.GetValue(0);
item.comp_id = Convert.ToInt32(new_comp_id.Value);
// set old object to null to prevent it from taking value from existing page
SaveHistory(item, null, item.argUser.name, "COMPLIST", item.comp, item.comp, dbmgr, null);
}
// otherwise updating existing object
else
{
// update COMPLIST table
dbmgr.CreateParameters(28);
dbmgr.AddParameters(0, "@comp_id", item.comp_id);
dbmgr.AddParameters(1, "@pri_sub", item.pri_sub);
dbmgr.AddParameters(2, "@unit_id", item.unit_id);
dbmgr.AddParameters(3, "@sys_id", item.sys_id);
dbmgr.AddParameters(4, "@train_id", item.train_id);
dbmgr.AddParameters(5, "@comp_type_id", item.comp_type_id);
dbmgr.AddParameters(6, "@comp", item.comp);
dbmgr.AddParameters(7, "@comp_desc", item.comp_desc);
dbmgr.AddParameters(8, "@np_id", item.np_id);
dbmgr.AddParameters(9, "@hsbp_id", item.hsbp_id);
dbmgr.AddParameters(10, "@hsp_id", item.hsp_id);
dbmgr.AddParameters(11, "@csp_id", item.csp_id);
dbmgr.AddParameters(12, "@prap_id", item.prap_id);
dbmgr.AddParameters(13, "@cfpp_id", item.cfpp_id);
dbmgr.AddParameters(14, "@npop_id", item.npop_id);
dbmgr.AddParameters(15, "@npo_np_id", item.npo_np_id);
dbmgr.AddParameters(16, "@fail_elect_id", item.fail_elect_id);
dbmgr.AddParameters(17, "@fail_air_id", item.fail_air_id);
dbmgr.AddParameters(18, "@hi_lo", item.hi_lo);
dbmgr.AddParameters(19, "@ssd_req", item.ssd_req);
dbmgr.AddParameters(20, "@pra_req", item.pra_req);
dbmgr.AddParameters(21, "@npo_req", item.npo_req);
dbmgr.AddParameters(22, "@cfp_req", item.cfp_req);
dbmgr.AddParameters(23, "@nsca_req", item.nsca_req);
dbmgr.AddParameters(24, "@method_id", item.method_id);
dbmgr.AddParameters(25, "@box_id", item.box_id);
dbmgr.AddParameters(26, "@comment", item.comment);
dbmgr.AddParameters(27, "@error_num", 0, true);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.COMPLIST_u");
// update master drawings
UpdateMasterDrawing(dbmgr, item, item.ee_id, item.ee_ref, item.ee_rev, item.ee_cp, 1); // elementary
UpdateMasterDrawing(dbmgr, item, item.pid_id, item.pid_ref, item.pid_rev, item.pid_cp, 2); // p&id
UpdateMasterDrawing(dbmgr, item, item.ol_id, item.ol_ref, item.ol_rev, item.ol_cp, 3); // one-line
// update status
UpdateStatus(dbmgr, item, 1, item.prep_by, item.prep_date);
UpdateStatus(dbmgr, item, 5, item.chkd_by, item.chkd_date);
// save to history
SaveHistory(item, _oldobj, item.argUser.name, "COMPLIST", item.comp, item.comp, dbmgr, _fieldlist);
}
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
// if there is problem with transaction roll back to original
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
private void UpdateDisposition(object obj, IDBManager dbmgr)
{
Disposition item = (Disposition)obj;
System.Data.Common.DbParameter new_disp_id;
try
{
dbmgr.Open();
dbmgr.BeginTransaction();
if (item.disp_id == 0)
{
// if is id null then create new object
dbmgr.CreateParameters(3);
dbmgr.AddParameters(0, "@id", 0, true);
dbmgr.AddParameters(1, "@disp", item.disp);
dbmgr.AddParameters(2, "@disp_desc", item.disp_desc);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.DISPLIST_i");
// get item id
new_disp_id = (System.Data.Common.DbParameter)dbmgr.Parameters.GetValue(0);
item.disp_id = Convert.ToInt32(new_disp_id.Value);
}
else
{
// update table
dbmgr.CreateParameters(3);
dbmgr.AddParameters(0, "@disp_id", item.disp_id);
dbmgr.AddParameters(1, "@disp", item.disp);
dbmgr.AddParameters(2, "@disp_desc", item.disp_desc);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.DISPLIST_u");
}
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
private void DeleteSubcomp(object obj, IDBManager dbmgr)
{
Subcomp item = (Subcomp)obj; // cast object to proper item type
try
{
dbmgr.Open(); // open database
dbmgr.BeginTransaction();
dbmgr.CreateParameters(2); // create required paramaters
dbmgr.AddParameters(0, "@comp_id", item.comp_id);
dbmgr.AddParameters(1, "@subcomp", item.subcomp);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.SUBCOMPS_d"); // execute stored procedure
// save history, set current item to null
SaveHistory(null, _oldobj, item.argUser.name, "SUBCOMPS", item.subcomp, item.comp, dbmgr, _fieldlist);
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
// if there is problem with transaction roll back to original
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
// updates cable
private void UpdateCable(object obj, IDBManager dbmgr)
{
CompCab item = (CompCab)obj;
try
{
dbmgr.Open(); // open database
dbmgr.CreateParameters(11); // create required paramaters
dbmgr.BeginTransaction();
dbmgr.AddParameters(0, "@comp_id", item.comp_id);
dbmgr.AddParameters(1, "@cable_id", item.cable_id);
dbmgr.AddParameters(2, "@note", item.note);
dbmgr.AddParameters(3, "@fault", item.fault);
dbmgr.AddParameters(4, "@fault_type", item.fault_type);
dbmgr.AddParameters(5, "@fr_dwg_rev", item.fr_dwg_rev);
dbmgr.AddParameters(6, "@to_dwg_rev", item.to_dwg_rev);
dbmgr.AddParameters(7, "@ssd_req", item.ssd_req);
dbmgr.AddParameters(8, "@pra_req", item.pra_req);
dbmgr.AddParameters(9, "@npo_req", item.npo_req);
dbmgr.AddParameters(10, "@cfp_req", item.cfp_req);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.COMPCAB_u"); //execute stored procedure
// save history
SaveHistory(item, _oldobj, item.argUser.name, "COMPCAB", item.cable, item.comp, dbmgr, _fieldlist);
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
// if there is problem with transaction roll back to original
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
// updates cable
private void UpdateCable(object obj, IDBManager dbmgr)
{
Cable item = (Cable)obj;
System.Data.Common.DbParameter new_cable_id;
try
{
dbmgr.Open();
dbmgr.BeginTransaction();
// check to see if new object
if (item.cable_id == 0)
{
// if id is null then create new object
dbmgr.CreateParameters(4);
dbmgr.AddParameters(0, "@id", 0, true);
dbmgr.AddParameters(1, "@cable", item.cable);
dbmgr.AddParameters(2, "@fr_equip_id", item.fr_equip_id);
dbmgr.AddParameters(3, "@to_equip_id", item.to_equip_id);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.CABLIST_i");
// get item id
new_cable_id = (System.Data.Common.DbParameter)dbmgr.Parameters.GetValue(0);
item.cable_id = Convert.ToInt32(new_cable_id.Value);
}
else
{
// update CABLIST table
dbmgr.CreateParameters(12);
dbmgr.AddParameters(0, "@cable_id", item.cable_id);
dbmgr.AddParameters(1, "@cable", item.cable);
dbmgr.AddParameters(2, "@fr_equip_id", item.fr_equip_id);
dbmgr.AddParameters(3, "@to_equip_id", item.to_equip_id);
dbmgr.AddParameters(4, "@fr_dwg_id", item.fr_dwg_id);
dbmgr.AddParameters(5, "@to_dwg_id", item.to_dwg_id);
dbmgr.AddParameters(6, "@fr_equip_bd", item.fr_equip_bd);
dbmgr.AddParameters(7, "@to_equip_bd", item.to_equip_bd);
dbmgr.AddParameters(8, "@cable_len", item.cable_len);
dbmgr.AddParameters(9, "@cable_size", item.cable_size);
dbmgr.AddParameters(10, "@cable_code", item.cable_code);
dbmgr.AddParameters(11, "@comment", item.comment);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.CABLIST_u"); // execute the stored procedure
//update status
UpdateStatus(dbmgr, item, 1, item.prep_by, item.prep_date);
UpdateStatus(dbmgr, item, 5, item.chkd_by, item.chkd_date);
}
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
private void UpdateUser(object obj, IDBManager dbmgr)
{
User item = (User)obj;
try
{
dbmgr.Open();
dbmgr.CreateParameters(7);
dbmgr.BeginTransaction();
dbmgr.AddParameters(0, "@name", item.name);
dbmgr.AddParameters(1, "@lname", item.lname);
dbmgr.AddParameters(2, "@fname", item.fname);
dbmgr.AddParameters(3, "@initial", item.initial);
dbmgr.AddParameters(4, "@level", item.level);
dbmgr.AddParameters(5, "@password", item.password);
dbmgr.AddParameters(6, "@plant", item.plant);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.USERLIST_u");
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
private void DeleteUser(object obj, IDBManager dbmgr)
{
User item = (User)obj;
try
{
dbmgr.Open();
dbmgr.BeginTransaction();
dbmgr.CreateParameters(1);
dbmgr.AddParameters(0, "NAME", item.name);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.USERLIST_d");
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
// updates recovery action
private void UpdateRA(object obj, IDBManager dbmgr)
{
CompRA item = (CompRA)obj;
try
{
dbmgr.Open(); // open database
dbmgr.CreateParameters(6); // create required paramaters
dbmgr.BeginTransaction();
dbmgr.AddParameters(0, "@comp_id", item.comp_id);
dbmgr.AddParameters(1, "@fa_id", item.fa_id);
dbmgr.AddParameters(2, "@ra_disp", item.ra_disp);
dbmgr.AddParameters(3, "@bin", item.bin);
dbmgr.AddParameters(4, "@ra_type", item.ra_type);
dbmgr.AddParameters(5, "@ra_feasible", item.ra_feasible);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.FACOMPRA_u"); // execute stored procedure
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
// if there is problem with transaction roll back to original
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
// updates drawing
private void UpdateDrawing(object obj, IDBManager dbmgr)
{
CompDwg item = (CompDwg)obj;
try
{
dbmgr.Open(); // open database
dbmgr.CreateParameters(5); // create required paramaters
dbmgr.BeginTransaction();
dbmgr.AddParameters(0, "@comp_id", item.comp_id);
dbmgr.AddParameters(1, "@dwg_id", item.dwg_id);
dbmgr.AddParameters(2, "@dwgtype_id", 4); // other drawing
dbmgr.AddParameters(3, "@dwg_rev", item.dwg_rev);
dbmgr.AddParameters(4, "@dwg_cp", item.dwg_cp);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.COMPDWGS_u"); // execute stored procedure
// save history
SaveHistory(item, _oldobj, item.argUser.name, "COMPDWGS", item.dwg_ref, item.comp, dbmgr, _fieldlist);
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
// if there is problem with transaction roll back to original
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
private void UpdateFireArea(object obj, IDBManager dbmgr)
{
FireArea item = (FireArea)obj;
System.Data.Common.DbParameter param;
try
{
dbmgr.Open();
dbmgr.BeginTransaction();
// check to see if new object
if (item.fa_id == 0)
{
dbmgr.CreateParameters(3);
dbmgr.AddParameters(0, "@id", 0, true);
dbmgr.AddParameters(1, "@fa", item.fa);
dbmgr.AddParameters(2, "@fa_desc", item.fa_desc);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.FALIST_i");
// get item id
param = (System.Data.Common.DbParameter)dbmgr.Parameters.GetValue(0);
item.fa_id = (int)param.Value;
}
// otherwise update existing object
else
{
dbmgr.CreateParameters(14);
dbmgr.AddParameters(0, "@fa_id", item.fa_id);
dbmgr.AddParameters(1, "@fa", item.fa);
dbmgr.AddParameters(2, "@fa_desc", item.fa_desc);
dbmgr.AddParameters(3, "@bldg", item.bldg);
dbmgr.AddParameters(4, "@elev", item.elev);
dbmgr.AddParameters(5, "@ssd_path", item.ssd_path);
dbmgr.AddParameters(6, "@req", item.req);
dbmgr.AddParameters(7, "@supp", item.supp);
dbmgr.AddParameters(8, "@det", item.det);
dbmgr.AddParameters(9, "@comment", item.comment);
dbmgr.AddParameters(10, "@dwg_id", item.dwg_id);
dbmgr.AddParameters(11, "@dwg_rev", item.dwg_rev);
dbmgr.AddParameters(12, "@risk_summary", item.risk_summary);
dbmgr.AddParameters(13, "@reg_basis", item.reg_basis);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.FALIST_u"); // execute the stored procedure
//update status
UpdateStatus(dbmgr, item, 1, item.prep_by, item.prep_date);
UpdateStatus(dbmgr, item, 5, item.chkd_by, item.chkd_date);
}
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
private void UpdatePSBkrCab(object obj, IDBManager dbmgr)
{
PSBkrCab item = (PSBkrCab)obj;
System.Data.Common.DbParameter new_psbkrcab_id;
try
{
dbmgr.Open();
dbmgr.BeginTransaction();
// check if new item
if (item.psbkrcab_id == 0)
{
// if id is null then create new item
dbmgr.CreateParameters(3);
dbmgr.AddParameters(0, "@id", 0, true);
dbmgr.AddParameters(1, "@psload_id", item.psload_id);
dbmgr.AddParameters(2, "@cable_id", item.cable_id);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.PSBKRCAB_i");
// get item id
new_psbkrcab_id = (System.Data.Common.DbParameter)dbmgr.Parameters.GetValue(0);
item.psbkrcab_id = Convert.ToInt32(new_psbkrcab_id.Value);
}
else
{
// update PSBKRCAB table
dbmgr.CreateParameters(3);
dbmgr.AddParameters(0, "@psbkrcab_id", item.psbkrcab_id);
dbmgr.AddParameters(1, "@psload_id", item.psload_id);
dbmgr.AddParameters(2, "@cable_id", item.cable_id);
dbmgr.ExecuteNonQuery(CommandType.StoredProcedure, "dbo.PSBKRCAB_u");
}
// update status
UpdateStatus(dbmgr, item, 1, item.prep_by, item.prep_date);
UpdateStatus(dbmgr, item, 5, item.chkd_by, item.chkd_date);
dbmgr.CommitTransaction();
}
catch (Exception ex)
{
// if there is problem with transaction roll back to original
dbmgr.RollbackTransaction();
throw ex;
}
finally
{
dbmgr.Dispose();
}
}
