private bool TestForEditLocks(ICadastralFabric Fabric, string NewJobName, ILongArray ParcelsToLock)
{
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)Fabric;
pFabLocks.LockingJob = NewJobName;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
try
{
pFabLocks.AcquireLocks(ParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
return(true);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS ||
pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED)
{
MessageBox.Show("Edit Locks could not be acquired on all parcels of selected lines.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
}
else
{
MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode));
}
return(false);
}
}
public bool TestForEditLocks(ICadastralFabric Fabric, string NewJobName, List <int> ParcelsToLock)
{
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)Fabric;
pFabLocks.LockingJob = NewJobName;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray TheParcelsToLock = new LongArrayClass();
foreach (int i in ParcelsToLock)
{
TheParcelsToLock.Add(i);
}
try
{
pFabLocks.AcquireLocks(TheParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
return(true);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS ||
pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED)
{
string sListOfFirst10 = "";
for (int i = 0; i < pLocksInConflict.Count; i++)
{
if (i == 10)
{
break;
}
sListOfFirst10 += pLocksInConflict.get_Element(i).ToString() + ", ";
}
MessageBox.Show("Edit Locks could not be acquired on all parcels." + Environment.NewLine +
"Parcel ids: " + sListOfFirst10.Trim().TrimEnd(','), "Move Fabric Points");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
}
else
{
MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode));
}
return(false);
}
}
protected override void OnClick()
{
#region Prepare for editing
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("This command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.",
"Delete Selected Parcels");
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
else
{
MessageBox.Show("Please start editing and try again.");
return;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(FabricUTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
{
return; //no fabric sublayers available for the targeted fabric
}
//bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false;
//ICadastralFabricLayer pCFLayer = null;
IWorkspace pWS = null;
ITable pParcelsTable = null;
ITable pLinesTable = null;
ITable pLinePtsTable = null;
ITable pPointsTable = null;
pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pLinesTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines);
pLinePtsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints);
pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
#endregion
dlgChangeParcelHistory pChangeHistoryDialog = new dlgChangeParcelHistory();
// ******** Display the dialog *********
DialogResult pDialogResult = pChangeHistoryDialog.ShowDialog();
if (pDialogResult != DialogResult.OK)
{
return;
}
//************************
#region Get Selection
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd;
IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
ICadastralFabricSchemaEdit2 pSchemaEd = null;
try
{
int iParcelCount = pCadaSel.SelectedParcelCount;
bool m_bShowProgressor = (iParcelCount > 10);
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = iParcelCount * 14; //(estimate 7 lines per parcel, 4 pts per parcel)
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Initializing...";
}
#endregion
#region Get Parcel History Fields
//Get the parcel table history fields
//SystemStart, SystemEnd, LegalStart, LegalEnd, Historic
int iParcSysStartDate = pParcelsTable.FindField("systemstartdate");
int iParcSysEndDate = pParcelsTable.FindField("systemenddate");
int iParcLegalStartDate = pParcelsTable.FindField("legalstartdate");
int iParcLegalEndDate = pParcelsTable.FindField("legalenddate");
int iParcHistorical = pParcelsTable.FindField("historical");
//Add the OIDs of all the selected parcels into a new feature IDSet
//Need a Lookup for the History information
Dictionary <int, string> ParcelToHistory_DICT = new Dictionary <int, string>();
List <string> sOIDList = new List <string>();
sOIDList.Add("");
int tokenLimit = 995;
bool bCont = true;
int j = 0;
int iCounter = 0;
m_pFIDSetParcels = new FIDSetClass();
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
if (iCounter <= tokenLimit)
{
if (sOIDList[j].Trim() == "")
{
sOIDList[j] = Convert.ToString(pGSParcel.DatabaseId);
}
else
{
sOIDList[j] = sOIDList[j] + "," + Convert.ToString(pGSParcel.DatabaseId);
}
iCounter++;
}
else
{//maximum tokens reached
iCounter = 0;
//set up the next OIDList
j++;
sOIDList.Add("");
sOIDList[j] = Convert.ToString(pGSParcel.DatabaseId);
}
//add to the lookup
IGSAttributes pGSParcelAttributes = (IGSAttributes)pGSParcel;
object pObj = pGSParcelAttributes.GetProperty("systemstartdate");
string sSystemStartParcel = "";
if (pObj != null)
{
sSystemStartParcel = pObj.ToString();
}
pObj = pGSParcelAttributes.GetProperty("systemenddate");
string sSystemEndParcel = "";
if (pObj != null)
{
sSystemEndParcel = pObj.ToString();
}
string sLegalStartParcel = pGSParcel.LegalStartDate.ToString();
string sLegalEndParcel = pGSParcel.LegalEndDate.ToString();
string sHistorical = pGSParcel.Historical.ToString();
ParcelToHistory_DICT.Add(pGSParcel.DatabaseId, sSystemStartParcel + "," +
sSystemEndParcel + "," + sLegalStartParcel + "," + sLegalEndParcel + "," +
sHistorical);
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection
#endregion
#region Confirm Edit Locks
bool bIsFileBasedGDB = false;
bool bIsUnVersioned = false;
bool bUseNonVersioned = false;
if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersioned))
{
return;
}
//if we're in an enterprise then test for edit locks
string sTime = "";
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Delete selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
Marshal.ReleaseComObject(pJob);
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
Marshal.ReleaseComObject(pJob);
}
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
FabricUTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_bShowProgressor && !bIsFileBasedGDB)
{
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
}
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS ||
pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
}
else
{
MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode));
}
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
Marshal.ReleaseComObject(pSoftLcksInConflict);
Marshal.ReleaseComObject(pParcelsToLock);
Marshal.ReleaseComObject(pLocksInConflict);
}
#endregion
string sParcelSysEndDate = pParcelsTable.Fields.get_Field(iParcSysEndDate).Name;
string sParcelLegalStartDate = pParcelsTable.Fields.get_Field(iParcLegalStartDate).Name;
string sParcelLegalEndDate = pParcelsTable.Fields.get_Field(iParcLegalEndDate).Name;
string sParcelHistoric = pParcelsTable.Fields.get_Field(iParcHistorical).Name;
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Updating parcel history...";
}
pEd.StartOperation();
#region The Edit
//make change to parcels
bool bSuccess = false;
ICursor pCurs = null;
IQueryFilter pQuFilter = new QueryFilterClass();
pQuFilter.SubFields = pParcelsTable.OIDFieldName + "," + sParcelLegalEndDate + "," + sParcelLegalStartDate
+ "," + sParcelSysEndDate + "," + sParcelHistoric;
bool bSystemEndDate_Clear = pChangeHistoryDialog.chkSystemEndDate.Checked &&
pChangeHistoryDialog.optClearSEDate.Checked;
bool bLegalStDate_Clear = pChangeHistoryDialog.chkLegalStartDate.Checked &&
pChangeHistoryDialog.optClearLSDate.Checked;
bool bLegalEndDate_Clear = pChangeHistoryDialog.chkLegalEndDate.Checked &&
pChangeHistoryDialog.optClearLEDate.Checked;
bool bSystemEndDate_Set = pChangeHistoryDialog.chkSystemEndDate.Checked &&
pChangeHistoryDialog.optChooseSEDate.Checked;
bool bLegalStDate_Set = pChangeHistoryDialog.chkLegalStartDate.Checked &&
pChangeHistoryDialog.optChooseLSDate.Checked;
bool bLegalEndDate_Set = pChangeHistoryDialog.chkLegalEndDate.Checked &&
pChangeHistoryDialog.optChooseLEDate.Checked;
List <bool> bHistory = new List <bool>();
bHistory.Add(bSystemEndDate_Clear);
bHistory.Add(bLegalStDate_Clear);
bHistory.Add(bLegalEndDate_Clear);
bHistory.Add(bSystemEndDate_Set);
bHistory.Add(bLegalStDate_Set);
bHistory.Add(bLegalEndDate_Set);
List <string> sDates = new List <string>();
sDates.Add(pChangeHistoryDialog.dtSEDatePicker.Text);
sDates.Add(pChangeHistoryDialog.dtLSDatePicker.Text);
sDates.Add(pChangeHistoryDialog.dtLEDatePicker.Text);
pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
pSchemaEd.ReleaseReadOnlyFields(pLinesTable, esriCadastralFabricTable.esriCFTLines); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(pParcelsTable, esriCadastralFabricTable.esriCFTParcels); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); //release safety-catch
foreach (string sInClause in sOIDList)
{
if (sInClause.Trim() == "")
{
continue;
}
pQuFilter.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")";
pCurs = pParcelsTable.Update(pQuFilter, false);
bSuccess = FabricUTILS.ChangeDatesOnTableMulti(pCurs, bHistory, sDates, bUseNonVersioned,
ParcelToHistory_DICT, m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
if (bUseNonVersioned)
{
FabricUTILS.AbortEditing(pWS);
}
else
{
pEd.AbortOperation();
}
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
}
//make change to points and lines
if (!FabricUTILS.UpdateHistoryOnLines(pLinesTable, pPointsTable, iParcelCount,
pCadFabric, sOIDList, ParcelToHistory_DICT, m_pStepProgressor, m_pTrackCancel))
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
if (bUseNonVersioned)
{
FabricUTILS.AbortEditing(pWS);
}
else
{
pEd.AbortOperation();
}
}
else
{
pEd.StopOperation("Change Parcel History");
}
#endregion
//now refresh the map layers
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
}
catch (Exception ex)
{
pEd.AbortOperation();
MessageBox.Show("Error:" + ex.Message);
}
finally
{
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints); //set safety back on
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLines); //set safety back on
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels); //set safety back on
}
}
protected override void OnClick()
{
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
//first get the selected parcel features
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
Marshal.ReleaseComObject(pUID);
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IFeatureLayer CFPointLayer = null; IFeatureLayer CFLineLayer = null;
IFeatureLayer CFControlLayer = null;
IFeatureLayer CFLinePointLayer = null;
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
IProgressDialog2 pProgressorDialog = null;
clsFabricUtils UTILS = new clsFabricUtils();
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!UTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(UTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
{
return; //no fabric sublayers available for the targeted fabric
}
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersioned = false;
IWorkspace pWS = null;
try
{
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!UTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersioned))
{
return;
}
if (bUseNonVersioned)
{
ICadastralFabricLayer pCFLayer = new CadastralFabricLayerClass();
pCFLayer.CadastralFabric = pCadFabric;
pCadEd.CadastralFabricLayer = pCFLayer;//NOTE: Need to set this back to NULL when done.
}
Hashtable FabLyrToFieldMap = new Hashtable();
DateChanger pDateChangerDialog = new DateChanger();
pDateChangerDialog.cboBoxFabricClasses.Items.Clear();
string[] FieldStrArr = new string[CFParcelLayers.Count];
for (int i = 0; i < CFParcelLayers.Count; i++)
{
FieldStrArr[i] = "";
IFeatureLayer lyr = (IFeatureLayer)CFParcelLayers.get_Element(i);
// ICadastralFabricLayer cflyr = CFParcelLayers.get_Element(i);
pDateChangerDialog.cboBoxFabricClasses.Items.Add(lyr.Name);
IFields pFlds = lyr.FeatureClass.Fields;
for (int j = 0; j < lyr.FeatureClass.Fields.FieldCount; j++)
{
IField pFld = lyr.FeatureClass.Fields.get_Field(j);
if (pFld.Type == esriFieldType.esriFieldTypeDate)
{
if (FieldStrArr[i].Trim() == "")
{
FieldStrArr[i] = pFld.Name;
}
else
{
FieldStrArr[i] += "," + pFld.Name;
}
}
}
FabLyrToFieldMap.Add(i, FieldStrArr[i]);
}
pDateChangerDialog.FieldMap = FabLyrToFieldMap;
pDateChangerDialog.cboBoxFabricClasses.SelectedIndex = 0;
// ******** Display the dialog *********
DialogResult pDialogResult = pDateChangerDialog.ShowDialog();
if (pDialogResult != DialogResult.OK)
{
return;
}
//************************
//*** get the choices from the dialog
IFeatureLayer flyr = (IFeatureLayer)CFParcelLayers.get_Element(pDateChangerDialog.cboBoxFabricClasses.SelectedIndex);
int iDateFld = flyr.FeatureClass.Fields.FindField(pDateChangerDialog.cboBoxFields.Text);
if (pDateChangerDialog.radioButton2.Checked)
{
IField pFld = flyr.FeatureClass.Fields.get_Field(iDateFld);
if (!pFld.IsNullable)
{
MessageBox.Show("The field you selected does not allow NULL values, and must have a date." + Environment.NewLine +
"Please try again using the date option, or using a different date field.", "Field does not Allow Null", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
}
ICadastralFabricSubLayer pSubLyr = (ICadastralFabricSubLayer)flyr;
bool bLines = false;
bool bParcels = false;
if (pSubLyr.CadastralTableType == esriCadastralFabricTable.esriCFTLines)
{
bLines = true;
}
if (pSubLyr.CadastralTableType == esriCadastralFabricTable.esriCFTParcels)
{
bParcels = true;
}
//find out if there is a selection for the chosen layer
bool ChosenLayerHasSelection = false;
IFeatureSelection pFeatSel = null;
ISelectionSet2 pSelSet = null;
ICadastralSelection pCadaSel = null;
IEnumGSParcels pEnumGSParcels = null;
int iFeatureCnt = 0;
pFeatSel = (IFeatureSelection)flyr;
if (pFeatSel != null)
{
pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
ChosenLayerHasSelection = (pSelSet.Count > 0);
iFeatureCnt = pSelSet.Count;
}
//****
if (iFeatureCnt == 0)
{
if (MessageBox.Show("There are no features selected in the " + flyr.Name + " layer." + Environment.NewLine + "Click OK to Change dates for ALL features in the layer.", "No Selection",
MessageBoxButtons.OKCancel) != DialogResult.OK)
{
return;
}
}
else
{
pCadaSel = (ICadastralSelection)pCadEd;
//** TODO: this enum should be based on the selected points, lines, or line-points
pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
//***
}
if (iFeatureCnt == 0)
{
m_pCursor = (ICursor)flyr.FeatureClass.Search(null, false);
ITable pTable = (ITable)flyr.FeatureClass;
iFeatureCnt = pTable.RowCount(null);
}
m_bShowProgressor = (iFeatureCnt > 10);
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = iFeatureCnt;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
m_pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//====== need to do this for all the parcel sublayers in the map that are part of the target fabric
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Collecting data...";
}
bool bCont = true;
m_pFIDSetParcels = new FIDSetClass();
if (ChosenLayerHasSelection && bParcels && !bIsUnVersioned)
{
//if there is a selection add the OIDs of all the selected parcels into a new feature IDSet
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
//}
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
}
if ((!ChosenLayerHasSelection && bParcels && !bIsUnVersioned) ||
(!ChosenLayerHasSelection && bLines && !bIsUnVersioned))
{
IRow pRow = m_pCursor.NextRow();
while (pRow != null)
{
m_pFIDSetParcels.Add(pRow.OID);
Marshal.ReleaseComObject(pRow);
pRow = m_pCursor.NextRow();
}
Marshal.ReleaseComObject(m_pCursor);
}
if (bLines && ChosenLayerHasSelection && !bIsUnVersioned)
{
pSelSet.Search(null, false, out m_pCursor);
IRow pRow = m_pCursor.NextRow();
int iFld = m_pCursor.FindField("PARCELID");
while (pRow != null)
{
m_pFIDSetParcels.Add((int)pRow.get_Value(iFld));
Marshal.ReleaseComObject(pRow);
pRow = m_pCursor.NextRow();
}
Marshal.ReleaseComObject(m_pCursor);
}
//=========================================================
if (!bCont)
{
//Since I'm using update cursor need to clear the cadastral selection
pCadaSel.SelectedParcels = null;
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
string sTime = "";
if (!bIsUnVersioned)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Change Date on selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
}
//if we're in an enterprise then test for edit locks
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
UTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_pStepProgressor != null && !bIsFileBasedGDB)
{
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
}
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
//clear selection, to make sure the parcel explorer is updated and refreshed properly
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
}
else
{
MessageBox.Show(Convert.ToString(pCOMEx.ErrorCode));
}
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
}
//Now... start the edit. Start an edit operation.
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.StartOperation();
}
if (bUseNonVersioned)
{
if (!UTILS.StartEditing(pWS, bUseNonVersioned))
{
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
}
//Change all the date records
if (m_pStepProgressor != null)
{
m_pStepProgressor.Message = "Changing dates...";
}
bool bSuccess = true;
ITable Table2Edit = (ITable)flyr.FeatureClass;
ITableWrite pTableWr = (ITableWrite)Table2Edit;
if (ChosenLayerHasSelection)
{
//TODO: Selection based update does not work on unversioned tables
//need to change this code to create an update cursor from the selection,
//including code for tokens > 995
pSelSet.Update(null, false, out m_pCursor);
}
else
{
if (bUseNonVersioned)
{
m_pCursor = pTableWr.UpdateRows(null, false);
}
else
{
m_pCursor = Table2Edit.Update(null, false);
}
}
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
if (bLines)
{
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTLines); //release safety-catch
}
else if (bParcels)
{
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTParcels); //release safety-catch
}
else
{
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTPoints); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTControl); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTLinePoints); //release safety-catch
}
if (pDateChangerDialog.radioButton2.Checked)
{
bSuccess = UTILS.ChangeDatesOnTable(m_pCursor, pDateChangerDialog.cboBoxFields.Text, "",
bUseNonVersioned, m_pStepProgressor, m_pTrackCancel);
}
else
{
bSuccess = UTILS.ChangeDatesOnTable(m_pCursor, pDateChangerDialog.cboBoxFields.Text,
pDateChangerDialog.dateTimePicker1.Text, bUseNonVersioned, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
if (bUseNonVersioned)
{
UTILS.AbortEditing(pWS);
}
else
{
pEd.AbortOperation();
}
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.StopOperation("Change Date");
}
if (bUseNonVersioned)
{
UTILS.StopEditing(pWS);
}
if (bParcels)
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
}
else if (bLines)
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLines);
}
else
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints); //release safety-catch
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl); //release safety-catch
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLinePoints); //release safety-catch
}
}
catch (Exception ex)
{
MessageBox.Show("Error:" + ex.Message);
if (bUseNonVersioned)
{
UTILS.AbortEditing(pWS);
}
else
{
pEd.AbortOperation();
}
}
finally
{
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
}
}
protected override void OnClick()
{
m_bNoUpdates = false;
m_sReport = "Direction Inverse Report:";
IEditor m_pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
if (m_pEd.EditState == esriEditState.esriStateNotEditing)
{
MessageBox.Show("Please start editing first, and try again.", "Start Editing");
return;
}
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("The Delete Parcels command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.",
"Delete Selected Parcels");
return;
}
try
{
IEditProperties2 pEditorProps2 = (IEditProperties2)m_pEd;
IArray LineLyrArr;
IMap pMap = m_pEd.Map;
ICadastralFabric pCadFabric = null;
//ISpatialReference pSpatRef = m_pEd.Map.SpatialReference;
//IProjectedCoordinateSystem2 pPCS = null;
IActiveView pActiveView = ArcMap.Document.ActiveView;
//double dMetersPerUnit = 1;
//if (pSpatRef == null)
// ;
//else if (pSpatRef is IProjectedCoordinateSystem2)
//{
// pPCS = (IProjectedCoordinateSystem2)pSpatRef;
// string sUnit = pPCS.CoordinateUnit.Name;
// if (sUnit.Contains("Foot") && sUnit.Contains("US"))
// sUnit = "U.S. Feet";
// dMetersPerUnit = pPCS.CoordinateUnit.MetersPerUnit;
//}
IAngularConverter pAngConv = new AngularConverterClass();
Utilities Utils = new Utilities();
if (!Utils.GetFabricSubLayers(pMap, esriCadastralFabricTable.esriCFTLines, out LineLyrArr))
{
return;
}
//if we're in an edit session then grab the target fabric
if (m_pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!Utils.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
List <int> lstLineIds = new List <int>();
IFeatureClass pFabricLinesFC = (IFeatureClass)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines);
int idxParcelIDFld = pFabricLinesFC.Fields.FindField("ParcelID");
int idxCENTERPTID = pFabricLinesFC.Fields.FindField("CenterPointID");
int idxRADIUS = pFabricLinesFC.Fields.FindField("Radius");
bool bFieldsPresent = true;
if (idxParcelIDFld == -1)
{
bFieldsPresent = false;
}
if (idxCENTERPTID == -1)
{
bFieldsPresent = false;
}
if (idxRADIUS == -1)
{
bFieldsPresent = false;
}
if (!bFieldsPresent)
{
MessageBox.Show("Fields missing.");
return;
}
Dictionary <int, List <string> > dictLineToCurveNeighbourData = new Dictionary <int, List <string> >();
m_pFIDSetParcels = new FIDSet();
for (int i = 0; i < LineLyrArr.Count; i++)
{
IFeatureSelection pFeatSel = LineLyrArr.Element[i] as IFeatureSelection;
ISelectionSet pSelSet = pFeatSel.SelectionSet;
ICursor pCursor = null;
pSelSet.Search(null, false, out pCursor);
IFeature pLineFeat = pCursor.NextRow() as IFeature;
while (pLineFeat != null)
{
if (!lstLineIds.Contains(pLineFeat.OID))
{
IGeometry pGeom = pLineFeat.ShapeCopy;
ISegmentCollection pSegColl = pGeom as ISegmentCollection;
ISegment pSeg = null;
if (pSegColl.SegmentCount == 1)
{
pSeg = pSegColl.get_Segment(0);
}
else
{
//todo: but for now, only deals with single segment short segments
Marshal.ReleaseComObject(pLineFeat);
pLineFeat = pCursor.NextRow() as IFeature;
continue;
}
//check geometry for circular arc
if (pSeg is ICircularArc)
{
object dVal1 = pLineFeat.get_Value(idxRADIUS);
object dVal2 = pLineFeat.get_Value(idxCENTERPTID);
ICircularArc pCircArc = pSeg as ICircularArc;
if (dVal1 != DBNull.Value && dVal2 != DBNull.Value)
{
Marshal.ReleaseComObject(pLineFeat);
pLineFeat = pCursor.NextRow() as IFeature;
continue;
}
}
//query near lines
int iFoundTangent = 0;
List <string> sCurveInfoFromNeighbours = new List <string>();
if (Utils.HasTangentCurveMatchFeatures(pFabricLinesFC, (IPolycurve)pGeom, "", 1.5, 0.033, 1, (pSeg.Length * 1.1),
out iFoundTangent, ref sCurveInfoFromNeighbours))
{
lstLineIds.Add(pLineFeat.OID);
int j = (int)pLineFeat.get_Value(idxParcelIDFld);
m_pFIDSetParcels.Add(j);
dictLineToCurveNeighbourData.Add(pLineFeat.OID, sCurveInfoFromNeighbours);
}
if (iFoundTangent == 1) //if there's only one tangent look further afield
{
int iFoundLinesCount = 0;
int iFoundParallel = 0;
if (Utils.HasParallelCurveMatchFeatures(pFabricLinesFC, (IPolycurve)pGeom, "", 1.5, 70,
out iFoundLinesCount, out iFoundParallel, ref sCurveInfoFromNeighbours))
{
if (!dictLineToCurveNeighbourData.ContainsKey(pLineFeat.OID))
{
dictLineToCurveNeighbourData.Add(pLineFeat.OID, sCurveInfoFromNeighbours);
}
}
}
}
Marshal.ReleaseComObject(pLineFeat);
pLineFeat = pCursor.NextRow() as IFeature;
}
Marshal.ReleaseComObject(pCursor);
}
#region line to curve candidate analysis
if (lstLineIds.Count == 0)
{
return;
}
RefineToBestRadiusAndCenterPoint(dictLineToCurveNeighbourData);
#endregion
if (dictLineToCurveNeighbourData.Count == 0)
{
return;
}
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false;
IWorkspace pWS = m_pEd.EditWorkspace;
IProgressDialog2 pProgressorDialog = null;
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
if (!Utils.SetupEditEnvironment(pWS, pCadFabric, m_pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersionedDelete))
{
return;
}
#region Create Cadastral Job
string sTime = "";
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Convert lines to curves";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
return;
}
}
#endregion
#region Test for Edit Locks
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
//only need to get locks for parcels that have lines that are to be changed
int[] pParcelIds = new int[m_pFIDSetParcels.Count()];
ILongArray pParcelsToLock = new LongArrayClass();
Utils.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, ref pParcelIds, m_pStepProgressor);
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
if (m_bShowProgressor && !bIsFileBasedGDB)
{
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
}
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS ||
pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
}
else
{
MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode));
}
return;
}
}
#endregion
if (m_pEd.EditState == esriEditState.esriStateEditing)
{
try
{
m_pEd.StartOperation();
}
catch
{
m_pEd.AbortOperation();//abort any open edit operations and try again
m_pEd.StartOperation();
}
}
if (bUseNonVersionedDelete)
{
if (!Utils.StartEditing(pWS, bIsUnVersioned))
{
return;
}
}
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
pSchemaEd.ReleaseReadOnlyFields((ITable)pFabricLinesFC, esriCadastralFabricTable.esriCFTLines); //release for edits
m_pQF = new QueryFilter();
// m_pEd.StartOperation();
List <string> sInClauseList = Utils.InClauseFromOIDsList(lstLineIds, 995);
foreach (string InClause in sInClauseList)
{
m_pQF.WhereClause = pFabricLinesFC.OIDFieldName + " IN (" + InClause + ")";
if (!UpdateCircularArcValues((ITable)pFabricLinesFC, m_pQF, bIsUnVersioned, dictLineToCurveNeighbourData))
{
;
}
}
m_pEd.StopOperation("Insert missing circular arc information.");
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
m_pEd.AbortOperation();
}
finally
{
}
}
protected override void OnClick()
{
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
//first get the selected parcel features
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("The Delete Parcels command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.",
"Delete Selected Parcels");
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(FabricUTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
{
return; //no fabric sublayers available for the targeted fabric
}
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false;
IWorkspace pWS = null;
ICadastralFabricLayer pCFLayer = null;
ITable pParcelsTable = null;
ITable pLinesTable = null;
ITable pLinePtsTable = null;
ITable pPointsTable = null;
ITable pControlTable = null;
try
{
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersionedDelete))
{
return;
}
if (bUseNonVersionedDelete)
{
pCFLayer = new CadastralFabricLayerClass();
pCFLayer.CadastralFabric = pCadFabric;
pCadEd.CadastralFabricLayer = pCFLayer;//NOTE: Need to set this back to NULL when done.
}
ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd;
IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
bMoreThan995UnjoinedParcels = (pSelSet.Count > pCadaSel.SelectedParcelCount); //used for bug workaround
if (pCadaSel.SelectedParcelCount == 0 && pSelSet.Count == 0)
{
MessageBox.Show("Please select some fabric parcels and try again.", "No Selection",
MessageBoxButtons.OK, MessageBoxIcon.Information);
pMouseCursor.SetCursor(0);
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
return;
}
if (bMoreThan995UnjoinedParcels)
{
m_bShowProgressor = (pSelSet.Count > 10);
}
else
{
m_bShowProgressor = (pCadaSel.SelectedParcelCount > 10);
}
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
if (bMoreThan995UnjoinedParcels)
{
m_pStepProgressor.MaxRange = pSelSet.Count * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list)
}
else
{
m_pStepProgressor.MaxRange = pCadaSel.SelectedParcelCount * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list)
}
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
m_pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//====== need to do this for all the parcel sublayers in the map that are part of the target fabric
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Collecting parcel data...";
}
//Add the OIDs of all the selected parcels into a new feature IDSet
string[] sOIDList = { "(" };
int tokenLimit = 995;
bool bCont = true;
int j = 0;
int iCounter = 0;
m_pFIDSetParcels = new FIDSetClass();
//===================== start bug workaraound for 10.0 client ===================
if (bMoreThan995UnjoinedParcels)
{
ICursor pCursor = null;
pSelSet.Search(null, false, out pCursor);//code deletes all selected parcels
IFeatureCursor pParcelFeatCurs = (IFeatureCursor)pCursor;
IFeature pParcFeat = pParcelFeatCurs.NextFeature();
while (pParcFeat != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
bool bExists = false;
m_pFIDSetParcels.Find(pParcFeat.OID, out bExists);
if (!bExists)
{
m_pFIDSetParcels.Add(pParcFeat.OID);
if (iCounter <= tokenLimit)
{
sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ",";
iCounter++;
}
else
{//maximum tokens reached
sOIDList[j] = sOIDList[j].Trim();
iCounter = 0;
//set up the next OIDList
j++;
FabricUTILS.RedimPreserveString(ref sOIDList, 1);
sOIDList[j] = "(";
sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ",";
}
}
Marshal.ReleaseComObject(pParcFeat); //garbage collection
pParcFeat = pParcelFeatCurs.NextFeature();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pCursor); //garbage collection
//===================== end bug workaraound for 10.0 client ===================
}
else //===the following code path is preferred======
{
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
if (iCounter <= tokenLimit)
{
sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ",";
iCounter++;
}
else
{//maximum tokens reached
sOIDList[j] = sOIDList[j].Trim();
iCounter = 0;
//set up the next OIDList
j++;
FabricUTILS.RedimPreserveString(ref sOIDList, 1);
sOIDList[j] = "(";
sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ",";
}
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection
}
if (!bCont)
{
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
string sTime = "";
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Delete selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
return;
}
}
//if we're in an enterprise then test for edit locks
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
FabricUTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_bShowProgressor && !bIsFileBasedGDB)
{
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
}
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS ||
pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
}
else
{
MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode));
}
return;
}
}
//Build an IDSet of lines for the parcel to be deleted, and build an IDSet of the points for those lines
m_pFIDSetLines = new FIDSetClass();
m_pFIDSetPoints = new FIDSetClass();
if (pEd.EditState == esriEditState.esriStateEditing)
{
try
{
pEd.StartOperation();
}
catch
{
pEd.AbortOperation();//abort any open edit operations and try again
pEd.StartOperation();
}
}
if (bUseNonVersionedDelete)
{
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{
return;
}
}
//first delete all the parcel records
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting parcels...";
}
bool bSuccess = true;
pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pLinesTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines);
pLinePtsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints);
pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
pControlTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTControl);
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pParcelsTable, m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pParcelsTable,
m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
if (!bIsUnVersioned)
{
//check version and if the Cancel button was not clicked and we're higher than
//version 10.0, then re-try the delete with the core delete command
string sVersion = Application.ProductVersion;
int iErrCode = FabricUTILS.LastErrorCode;
if (!sVersion.StartsWith("10.0") && iErrCode == -2147217400)
{
FabricUTILS.ExecuteCommand("{B0A62C1C-7FAE-457A-AB25-A966B7254EF6}");
}
}
return;
}
//next need to use an in clause for lines, so ...
string[] sPointOIDList = { "" };
int iCnt = 0;
int iTokenCnt = 0;
int iStepCnt = 1;
//...for each item in the sOIDList array
foreach (string inClause in sOIDList)
{
ICursor pLineCurs = FabricUTILS.GetCursorFromCommaSeparatedOIDList(pLinesTable, inClause, "PARCELID");
IRow pRow = pLineCurs.NextRow();
Int32 iFromPt = pLinesTable.Fields.FindField("FROMPOINTID");
Int32 iToPt = pLinesTable.Fields.FindField("TOPOINTID");
while (pRow != null)
{
if (iTokenCnt >= tokenLimit)
{
FabricUTILS.RedimPreserveString(ref sPointOIDList, 1);
iTokenCnt = 0;
iCnt++;
}
m_pFIDSetLines.Add(pRow.OID);
Int32 i = (Int32)pRow.get_Value(iFromPt);
if (i > -1)
{
bool bExists = false;
m_pFIDSetPoints.Find(i, out bExists);
if (!bExists)
{
m_pFIDSetPoints.Add(i);
sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ",";
iTokenCnt++;
}
}
i = (Int32)pRow.get_Value(iToPt);
if (i > -1)
{
bool bExists = false;
m_pFIDSetPoints.Find(i, out bExists);
if (!bExists)
{
m_pFIDSetPoints.Add(i);
sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ",";
iTokenCnt++;
}
}
Marshal.ReleaseComObject(pRow); //garbage collection
pRow = pLineCurs.NextRow();
}
Marshal.ReleaseComObject(pLineCurs); //garbage collection
//delete line records based on the selected parcels
string sMessage = "Deleting lines...";
int iSetCnt = sOIDList.GetLength(0);
if (iSetCnt > 1)
{
sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt);
}
if (m_bShowProgressor)
{
m_pStepProgressor.Message = sMessage;
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
//delete the line points for the deleted parcels
//build the list of the line points that need to be deleted.
//IFeatureClass pFeatCLLinePoints = CFLinePointLayer.FeatureClass;
string NewInClause = "";
//remove trailing comma
if ((inClause.Substring(inClause.Length - 1, 1)) == ",")
{
NewInClause = inClause.Substring(0, inClause.Length - 1);
}
//m_pQF.WhereClause = (sPref + "parcelid" + sSuff).Trim() + " IN " + NewInClause + ")";
m_pQF.WhereClause = "PARCELID IN " + NewInClause + ")";
ICursor pLinePointCurs = pLinePtsTable.Search(m_pQF, false);
IRow pLinePointFeat = pLinePointCurs.NextRow();
//Build an IDSet of linepoints for parcels to be deleted
IFIDSet pFIDSetLinePoints = new FIDSetClass();
while (pLinePointFeat != null)
{
pFIDSetLinePoints.Add(pLinePointFeat.OID);
Marshal.ReleaseComObject(pLinePointFeat); //garbage collection
pLinePointFeat = pLinePointCurs.NextRow();
}
//===========deletes linepoints associated with parcels
iSetCnt = sOIDList.GetLength(0);
sMessage = "Deleting line-points...";
if (iSetCnt > 1)
{
sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt);
}
if (m_bShowProgressor)
{
m_pStepProgressor.Message = sMessage;
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinePtsTable,
pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinePtsTable,
pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
if (pLinePointCurs != null)
{
Marshal.ReleaseComObject(pLinePointCurs); //garbage
}
return;
}
///////==============================================
Marshal.ReleaseComObject(pLinePointCurs); //garbage
iStepCnt++;
}
//now need to get points that should not be deleted, because they are used by lines that are not deleted.
//first search for the remaining lines. Any that have from/to points that are in the point fidset are the points
//that should stay
IFIDSet pFIDSetNullGeomLinePtFrom = new FIDSetClass();
IFIDSet pFIDSetNullGeomLinePtTo = new FIDSetClass();
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Updating point delete list...";
}
for (int z = 0; z <= iCnt; z++)
{
//remove trailing comma
if ((sPointOIDList[z].Trim() == ""))
{
break;
}
if ((sPointOIDList[z].Substring(sPointOIDList[z].Length - 1, 1)) == ",")
{
sPointOIDList[z] = sPointOIDList[z].Substring(0, sPointOIDList[z].Length - 1);
}
}
//string TheWhereClause = "(" + (sPref + "frompointid" + sSuff).Trim() + " IN (";
//UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "frompointid",
// TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom);
//TheWhereClause = "(" + (sPref + "topointid" + sSuff).Trim() + " IN (";
//UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "topointid",
// TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo);
string TheWhereClause = "(FROMPOINTID IN (";
UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "FROMPOINTID",
TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom);
TheWhereClause = "(TOPOINTID IN (";
UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "TOPOINTID",
TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo);
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting points...";
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pPointsTable, m_pFIDSetPoints,
m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pPointsTable, m_pFIDSetPoints,
m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
//====Phase 2 of line-point delete. Remove the Line-points that no longer have underlying points.
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting line-points...";
}
for (int z = 0; z <= iCnt; z++)
{
if ((sPointOIDList[z].Trim() == ""))
{
continue;
}
//remove line points where underlying points were deleted
bSuccess = FabricUTILS.DeleteByQuery(pWS, pLinePtsTable, pLinePtsTable.Fields.get_Field(pLinePtsTable.FindField("LinePointID")),
sPointOIDList, !bIsUnVersioned, m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
}
//=====
//Empty geometry on points that are floating points on unjoined parcels
m_pEmptyGeoms = new FIDSetClass();
FabricUTILS.IntersectFIDSetCommonIDs(pFIDSetNullGeomLinePtTo, pFIDSetNullGeomLinePtFrom, out m_pEmptyGeoms);
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); //release safety-catch
if (!bUseNonVersionedDelete)
{
FabricUTILS.EmptyGeometries((IFeatureClass)pPointsTable, m_pEmptyGeoms);
}
else
{
FabricUTILS.EmptyGeometriesUnversioned(pWS, CFPointLayer.FeatureClass, m_pEmptyGeoms);
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);//set safety back on
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Resetting control point associations...";
}
for (int z = 0; z <= iCnt; z++)
{
if ((sPointOIDList[z].Trim() == ""))
{
break;
}
//cleanup associated control points, and associations where underlying points were deleted
//m_pQF.WhereClause = (sPref + "pointid" + sSuff).Trim() + " IN (" + sPointOIDList[z] + ")";
m_pQF.WhereClause = "POINTID IN (" + sPointOIDList[z] + ")";
pSchemaEd.ReleaseReadOnlyFields(pControlTable, esriCadastralFabricTable.esriCFTControl); //release safety-catch
if (!FabricUTILS.ResetControlAssociations(pControlTable, m_pQF, bUseNonVersionedDelete))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on
}
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on
if (bUseNonVersionedDelete)
{
FabricUTILS.StopEditing(pWS);
}
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.StopOperation("Delete parcels");
}
//clear selection, to make sure the parcel explorer is updated and refreshed properly
if (pFeatSel != null && bMoreThan995UnjoinedParcels)
{
pFeatSel.Clear();
}
}
catch (Exception ex)
{
if (bUseNonVersionedDelete)
{
FabricUTILS.AbortEditing(pWS);
}
if (pEd != null)
{
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.AbortOperation();
}
}
MessageBox.Show(ex.Message);
return;
}
finally
{
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
//update the TOC
IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document);
for (int i = 0; i < mxDocument.ContentsViewCount; i++)
{
IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i);
pCV.Refresh(null);
}
if (pMouseCursor != null)
{
pMouseCursor.SetCursor(0);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
}
}