// Clips feature geometries with a user defined clipping rectangle.
private async void ClipButton_Click(object sender, RoutedEventArgs e)
{
try
{
_clippedGraphicsOverlay.Graphics.Clear();
// wait for user to draw clip rect
var rect = await MyMapView.Editor.RequestShapeAsync(DrawShape.Rectangle);
Polygon polygon = GeometryEngine.NormalizeCentralMeridian(rect) as Polygon;
// get intersecting features from the feature layer
SpatialQueryFilter filter = new SpatialQueryFilter();
filter.Geometry = GeometryEngine.Project(polygon, _statesLayer.FeatureTable.SpatialReference);
filter.SpatialRelationship = SpatialRelationship.Intersects;
filter.MaximumRows = 52;
var stateFeatures = await _statesLayer.FeatureTable.QueryAsync(filter);
// Clip the feature geometries and add to graphics layer
var states = stateFeatures.Select(feature => feature.Geometry);
var clipGraphics = states
.Select(state => GeometryEngine.Clip(state, polygon.Extent))
.Select(geo => new Graphic(geo, _clipSymbol));
_clippedGraphicsOverlay.Graphics.AddRange(clipGraphics);
}
catch (TaskCanceledException) { }
catch (Exception ex)
{
var _x = new MessageDialog("Clip Error: " + ex.Message, "Clip Geometry").ShowAsync();
}
}
private void ClipButton_Click(object sender, EventArgs e)
{
try
{
// Remove the Colorado graphic from the input geometries graphics overlay collection. That way it will be easier
// to see the clip versions of the GeometryEngine.Clip operation.
_inputGeometriesGraphicsOverlay.Graphics.Remove(_coloradoGraphic);
// Loop through each graphic in the input geometries for the clip operation.
foreach (Graphic oneGraphic in _inputGeometriesGraphicsOverlay.Graphics)
{
// Perform the clip operation. The first parameter of the clip operation will always be the Colorado graphic.
// The second parameter of the clip operation will be one of the 3 different clip geometries (_outsideGraphic,
// _containedGraphic, or _intersectingGraphic).
Geometry myGeometry = GeometryEngine.Clip(_coloradoGraphic.Geometry, (Envelope)oneGraphic.Geometry);
// Only work on returned geometries that are not null.
if (myGeometry != null)
{
// Create the graphic as a result of the clip operation using the same symbology that was defined for
// the _coloradoGraphic defined in the Initialize() method previously.
Graphic clippedGraphic = new Graphic(myGeometry, _coloradoGraphic.Symbol);
// Add the clipped graphic to the clip areas graphics overlay collection.
_clipAreasGraphicsOverlay.Graphics.Add(clippedGraphic);
}
}
// Disable the button after has been used.
_clipButton.Enabled = false;
}
catch (System.Exception ex)
{
// Display an error message if there is a problem generating clip operation.
AlertDialog.Builder alertBuilder = new AlertDialog.Builder(this);
alertBuilder.SetTitle("There was a problem clipping the geometery.");
alertBuilder.SetMessage(ex.ToString());
alertBuilder.Show();
}
}
private void ClipButton_TouchUpInside(object sender, EventArgs e)
{
try
{
// Remove the Colorado graphic from the input geometries graphics overlay collection. That way it will be easier
// to see the clip versions of the GeometryEngine.Clip operation.
_inputGeometriesGraphicsOverlay.Graphics.Remove(_coloradoGraphic);
// Loop through each graphic in the input geometries for the clip operation.
foreach (Graphic oneGraphic in _inputGeometriesGraphicsOverlay.Graphics)
{
// Perform the clip operation. The first parameter of the clip operation will always be the Colorado graphic.
// The second parameter of the clip operation will be one of the 3 different clip geometries (_outsideGraphic,
// _containedGraphic, or _intersectingGraphic).
Geometry myGeometry = GeometryEngine.Clip(_coloradoGraphic.Geometry, (Envelope)oneGraphic.Geometry);
// Only work on returned geometries that are not null.
if (myGeometry != null)
{
// Create the graphic as a result of the clip operation using the same symbology that was defined for
// the _coloradoGraphic defined in the Initialize() method previously.
Graphic clippedGraphic = new Graphic(myGeometry, _coloradoGraphic.Symbol);
// Add the clipped graphic to the clip areas graphics overlay collection.
_clipAreasGraphicsOverlay.Graphics.Add(clippedGraphic);
}
}
// Disable the button after has been used.
_clipButton.Enabled = false;
}
catch (System.Exception ex)
{
// Display an error message if there is a problem generating clip operation.
UIAlertController alertController = UIAlertController.Create("Geometry Engine Failed!", ex.Message, UIAlertControllerStyle.Alert);
alertController.AddAction(UIAlertAction.Create("OK", UIAlertActionStyle.Default, null));
PresentViewController(alertController, true, null);
return;
}
}
// myMapView 事件
private async void MyMapView_MouseLeftButtonDown(object sender, MouseButtonEventArgs e)
{
IInputElement ie = (IInputElement)(sender);
MapPoint loc = myMapView.ScreenToLocation(e.GetPosition(ie));
switch (operation)
{
case OperateType.DrawPoint: //画点
Graphic pt = new Graphic(loc, pointSymbol);
graphicsLayer.Graphics.Add(pt);
break;
case OperateType.DrawPolyline: //画线
pointCollection.Add(loc);
if (pointCollection.Count >= 2)
{
if (pointCollection.Count > 2)
{
Graphic g = graphicsLayer.Graphics[graphicsLayer.Graphics.Count - 1];
PolylineBuilder lb = new PolylineBuilder(pointCollection);
g.Geometry = lb.ToGeometry();
}
else
{
Esri.ArcGISRuntime.Geometry.Polyline l = new Esri.ArcGISRuntime.Geometry.Polyline(pointCollection);
Graphic lg = new Graphic(l, lineSymbol);
graphicsLayer.Graphics.Add(lg);
}
}
break;
case OperateType.DrawPolygon: //画多边形
pointCollection.Add(loc);
if (pointCollection.Count >= 3)
{
if (pointCollection.Count > 3)
{
Graphic g = graphicsLayer.Graphics[graphicsLayer.Graphics.Count - 1];
PolygonBuilder pb = new PolygonBuilder(pointCollection);
g.Geometry = pb.ToGeometry();
}
else
{
Esri.ArcGISRuntime.Geometry.Polygon p = new Esri.ArcGISRuntime.Geometry.Polygon(pointCollection);
Graphic pg = new Graphic(p, fillSymbol);
graphicsLayer.Graphics.Add(pg);
}
}
break;
case OperateType.None: //缺省状态
graphicsLayer.ClearSelection();
IdentifyGraphicsOverlayResult result = await myMapView.IdentifyGraphicsOverlayAsync(graphicsLayer, e.GetPosition(ie), 5, false);
//选择图形元素
if (result.Graphics.Count < 1)
{
curSelGraphic = null;
EditVertexMenuItem.IsEnabled = false;
UneditVertexMenuItem.IsEnabled = false;
return;
}
curSelGraphic = result.Graphics.First();
curSelGraphic.IsSelected = true;
EditVertexMenuItem.IsEnabled = true;
break;
case OperateType.Cal_Clip: //选择图形
IdentifyGraphicsOverlayResult gResult = await myMapView.IdentifyGraphicsOverlayAsync(graphicsLayer, e.GetPosition(ie), 5, false);
if (gResult.Graphics.Count < 1)
{
return;
}
Graphic selGraphic = gResult.Graphics.First();
selGraphic.IsSelected = true; listOfClipGraphics.Add(selGraphic); //记录所选图形
if (listOfClipGraphics.Count == 2) //图形数目为2时，进行剪切计算
{
Graphic g1 = listOfClipGraphics[0];
Graphic g2 = listOfClipGraphics[1];
if (g1.Geometry.GeometryType != GeometryType.Polygon || g2.Geometry.GeometryType != GeometryType.Polygon) //如果所选图形不是多边形，则退出
{
MessageBox.Show("请选择两个多边形图形！");
listOfClipGraphics.Clear();
graphicsLayer.ClearSelection();
return;
}
Esri.ArcGISRuntime.Geometry.Geometry resultGeometry = GeometryEngine.Clip(g1.Geometry, g2.Geometry.Extent); //执行剪切操作
if (resultGeometry != null) //处理结果
{
graphicsLayer.Graphics.Remove(g1); //从图形层中移除原图形
graphicsLayer.Graphics.Remove(g2);
Graphic clipedGraphic = new Graphic(resultGeometry, fillSymbol); //利 用剪切结果构建新的图形
graphicsLayer.Graphics.Add(clipedGraphic); operation = OperateType.None;
}
listOfClipGraphics.Clear(); //清空图形选择集合
graphicsLayer.ClearSelection(); //清空图形层所选
}
break;
case OperateType.Cal_Union: // 联合
IdentifyGraphicsOverlayResult gResultUnion = await myMapView.IdentifyGraphicsOverlayAsync(graphicsLayer, e.GetPosition(ie), 5, false);
if (gResultUnion.Graphics.Count < 1)
{
return;
}
Graphic selGraphicUnion = gResultUnion.Graphics.First();
selGraphicUnion.IsSelected = true;
listOfClipGraphics.Add(selGraphicUnion); //记录所选图形
if (listOfClipGraphics.Count == 2) //图形数目为2时，进行剪切计算
{
Graphic g1 = listOfClipGraphics[0];
Graphic g2 = listOfClipGraphics[1];
if (g1.Geometry.GeometryType != GeometryType.Polygon || g2.Geometry.GeometryType != GeometryType.Polygon) //如果所选图形不是多边形，则退出
{
MessageBox.Show("请选择两个多边形图形！");
listOfClipGraphics.Clear();
graphicsLayer.ClearSelection();
return;
}
Esri.ArcGISRuntime.Geometry.Geometry resultGeometry = GeometryEngine.Union(g1.Geometry, g2.Geometry.Extent); //执行剪切操作
if (resultGeometry != null) //处理结果
{
graphicsLayer.Graphics.Remove(g1); //从图形层中移除原图形
graphicsLayer.Graphics.Remove(g2);
Graphic clipedGraphic = new Graphic(resultGeometry, fillSymbol); //利 用剪切结果构建新的图形
graphicsLayer.Graphics.Add(clipedGraphic);
operation = OperateType.None;
}
listOfClipGraphics.Clear(); //清空图形选择集合
graphicsLayer.ClearSelection(); //清空图形层所选
}
break;
case OperateType.Cal_Cut: // 剪切
IdentifyGraphicsOverlayResult gResult_Cut = await myMapView.IdentifyGraphicsOverlayAsync(graphicsLayer, e.GetPosition(ie), 5, false);
if (gResult_Cut.Graphics.Count < 1)
{
return;
}
Graphic selGraphic_Cut = gResult_Cut.Graphics.First();
selGraphic_Cut.IsSelected = true;
listOfClipGraphics.Add(selGraphic_Cut); //记录所选图形
if (listOfClipGraphics.Count == 2) //图形数目为1时，进行剪切计算
{
Graphic g1 = listOfClipGraphics[0];
Graphic g2 = listOfClipGraphics[1];
if (g1.Geometry.GeometryType != GeometryType.Polygon || g2.Geometry.GeometryType != GeometryType.Polyline) //如果所选图形不是多边形，则退出
{
MessageBox.Show("请先选择一个面要素后再选择一个线要素.");
listOfClipGraphics.Clear();
graphicsLayer.ClearSelection();
return;
}
Esri.ArcGISRuntime.Geometry.Polyline polyLine = (Esri.ArcGISRuntime.Geometry.Polyline)g2.Geometry;
Esri.ArcGISRuntime.Geometry.Geometry[] resultGeometry = GeometryEngine.Cut(g1.Geometry, polyLine); //执行剪切操作
if (resultGeometry != null) //处理结果
{
graphicsLayer.Graphics.Remove(g1);
for (int z = 0; z < resultGeometry.Length; z++)
{
Graphic clipedGraphic = new Graphic(resultGeometry[z], fillSymbol); //利 用剪切结果构建新的图形
graphicsLayer.Graphics.Add(clipedGraphic);
}
operation = OperateType.None;
}
listOfClipGraphics.Clear(); //清空图形选择集合
graphicsLayer.ClearSelection(); //清空图形层所选
}
break;
case OperateType.Cal_Simplify: // 拓扑纠正
IdentifyGraphicsOverlayResult gResult_Simplify = await myMapView.IdentifyGraphicsOverlayAsync(graphicsLayer, e.GetPosition(ie), 5, false);
if (gResult_Simplify.Graphics.Count < 1)
{
return;
}
Graphic selGraphic_Simplify = gResult_Simplify.Graphics.First();
selGraphic_Simplify.IsSelected = true;
listOfClipGraphics.Add(selGraphic_Simplify); //记录所选图形
if (listOfClipGraphics.Count == 1) //图形数目为1时，进行剪切计算
{
Graphic g1 = listOfClipGraphics[0];
if (g1.Geometry.GeometryType == GeometryType.Point) //如果所选图形不是多边形，则退出
{
MessageBox.Show("请先选择一个面要素或线要素.");
listOfClipGraphics.Clear();
graphicsLayer.ClearSelection();
return;
}
Esri.ArcGISRuntime.Geometry.Geometry resultGeometry = GeometryEngine.Simplify(g1.Geometry); //执行剪切操作
if (resultGeometry != null) //处理结果
{
graphicsLayer.Graphics.Remove(g1); //从图形层中移除原图形
Graphic clipedGraphic = new Graphic(resultGeometry, fillSymbol); //利 用剪切结果构建新的图形
graphicsLayer.Graphics.Add(clipedGraphic);
operation = OperateType.None;
}
listOfClipGraphics.Clear(); //清空图形选择集合
graphicsLayer.ClearSelection(); //清空图形层所选
}
break;
case OperateType.Cal_Gene: // 简化
IdentifyGraphicsOverlayResult gResult_Gene = await myMapView.IdentifyGraphicsOverlayAsync(graphicsLayer, e.GetPosition(ie), 5, false);
if (gResult_Gene.Graphics.Count < 1)
{
return;
}
Graphic selGraphic_Gene = gResult_Gene.Graphics.First();
selGraphic_Gene.IsSelected = true;
listOfClipGraphics.Add(selGraphic_Gene); //记录所选图形
if (listOfClipGraphics.Count == 1) //图形数目为1时
{
Graphic g1 = listOfClipGraphics[0];
if (g1.Geometry.GeometryType == GeometryType.Point) //如果所选图形是点，则退出
{
MessageBox.Show("请先选择一个面要素或线要素.");
listOfClipGraphics.Clear();
graphicsLayer.ClearSelection();
return;
}
Esri.ArcGISRuntime.Geometry.Geometry resultGeometry = GeometryEngine.Generalize(g1.Geometry, 1000000.0, true); //执行剪切操作
if (resultGeometry != null) //处理结果
{
MessageBox.Show(resultGeometry.ToJson() + "\n" + resultGeometry.GeometryType);
graphicsLayer.Graphics.Remove(g1); //从图形层中移除原图形
Graphic clipedGraphic = new Graphic(resultGeometry, fillSymbol); //利 用剪切结果构建新的图形
graphicsLayer.Graphics.Add(clipedGraphic);
operation = OperateType.None;
}
listOfClipGraphics.Clear(); //清空图形选择集合
graphicsLayer.ClearSelection(); //清空图形层所选
}
break;
case OperateType.Cal_Buff: // 缓冲
IdentifyGraphicsOverlayResult gResult_Buff = await myMapView.IdentifyGraphicsOverlayAsync(graphicsLayer, e.GetPosition(ie), 5, false);
if (gResult_Buff.Graphics.Count < 1)
{
return;
}
Graphic selGraphic_Buff = gResult_Buff.Graphics.First();
selGraphic_Buff.IsSelected = true;
listOfClipGraphics.Add(selGraphic_Buff); //记录所选图形
if (listOfClipGraphics.Count == 1) //图形数目为1时，进行剪切计算
{
Graphic g1 = listOfClipGraphics[0];
Esri.ArcGISRuntime.Geometry.Geometry resultGeometry = GeometryEngine.Buffer(g1.Geometry, 1000000.0); //执行剪切操作
if (resultGeometry != null) //处理结果
{
graphicsLayer.Graphics.Remove(g1); //从图形层中移除原图形
Graphic clipedGraphic = new Graphic(resultGeometry, new SimpleFillSymbol(SimpleFillSymbolStyle.Solid, Color.FromArgb(125, 255, 250, 0), new SimpleLineSymbol(SimpleLineSymbolStyle.Solid, Color.FromArgb(0, 0, 0), 4.0))); //利 用剪切结果构建新的图形
graphicsLayer.Graphics.Add(clipedGraphic);
operation = OperateType.None;
}
listOfClipGraphics.Clear(); //清空图形选择集合
graphicsLayer.ClearSelection(); //清空图形层所选
}
break;
case OperateType.Cal_Jiaodian: // 交点
IdentifyGraphicsOverlayResult gResult_Jiaodian = await myMapView.IdentifyGraphicsOverlayAsync(graphicsLayer, e.GetPosition(ie), 5, false);
if (gResult_Jiaodian.Graphics.Count < 1)
{
return;
}
Graphic selGraphic_Jiaodian = gResult_Jiaodian.Graphics.First();
selGraphic_Jiaodian.IsSelected = true;
listOfClipGraphics.Add(selGraphic_Jiaodian); //记录所选图形
if (listOfClipGraphics.Count == 2) //图形数目为1时，进行剪切计算
{
Graphic g1 = listOfClipGraphics[0];
Graphic g2 = listOfClipGraphics[1];
IReadOnlyList <Geometry> resultGeometry = GeometryEngine.Intersections(g1.Geometry, g2.Geometry); //执行剪切操作
if (resultGeometry != null) //处理结果
{
Graphic clipedGraphic = new Graphic(resultGeometry[0], pointSymbol); //利 用剪切结果构建新的图形
graphicsLayer.Graphics.Add(clipedGraphic);
operation = OperateType.None;
}
listOfClipGraphics.Clear(); //清空图形选择集合
graphicsLayer.ClearSelection(); //清空图形层所选
}
break;
}
}
