public void SvgFloorplan()
{
var r = new Random(23523);
const int FLOOR_COUNT = 1;
for (int i = 0; i < FLOOR_COUNT; i++)
{
var plan = new GeometricFloorplan(new ReadOnlyCollection <Vector2>(new[] { new Vector2(-25, -25), new Vector2(-25, 25), new Vector2(25, 25), new Vector2(25, -25) }));
for (int j = 0; j < 3; j++)
{
var minX = r.Next(-25, 20);
var minY = r.Next(-25, 20);
var width = r.Next(10, 20);
var height = r.Next(10, 20);
plan.Add(new[] { new Vector2(minX, minY), new Vector2(minX, minY + height), new Vector2(minX + width, minY + height), new Vector2(minX + width, minY) },
r.Next(1, 5)
);
}
plan.Freeze();
//Console.WriteLine(FloorplanToSvg(plan, 500, 0, 0, (i * floorHeight - floorCount * floorHeight)));
}
}
public void RegressionTest_UnmatchedWallSections()
{
// This is a case generated from fuzz testing (i.e. generate random data, see what breaks).
// Sometimes matching up inner and outer sections of wall data used to fail (fixed in EpimetheusPlugins).
// This test will fail in that case
var r = new Random(189);
var plan = new GeometricFloorplan(new ReadOnlyCollection <Vector2>(new[] { new Vector2(-25, -25), new Vector2(-25, 25), new Vector2(25, 25), new Vector2(25, -25) }));
for (int j = 0; j < 3; j++)
{
var minX = r.Next(-25, 20);
var minY = r.Next(-25, 20);
var width = r.Next(10, 20);
var height = r.Next(10, 20);
plan.Add(new[] { new Vector2(minX, minY), new Vector2(minX, minY + height), new Vector2(minX + width, minY + height), new Vector2(minX + width, minY) },
1
);
}
plan.Freeze();
Console.WriteLine(SvgRoomVisualiser.FloorplanToSvg(_plan));
}
public void RegressionTest_ShrinkingSplitsFootprint()
{
// This is a case generated from fuzz testing (i.e. generate random data, see what breaks).
// Shrinking a shape can generate *several* separate shapes if the original shape was convex.
// This used to fail, now shrinking discards all the generated shapes except the largest (fixed with a change in EpimetheusPlugins).
var r = new Random(738);
var plan = new GeometricFloorplan(new ReadOnlyCollection <Vector2>(new[] { new Vector2(-25, -25), new Vector2(-25, 25), new Vector2(25, 25), new Vector2(25, -25) }));
for (int j = 0; j < 3; j++)
{
var minX = r.Next(-25, 20);
var minY = r.Next(-25, 20);
var width = r.Next(10, 20);
var height = r.Next(10, 20);
plan.Add(new[] { new Vector2(minX, minY), new Vector2(minX, minY + height), new Vector2(minX + width, minY + height), new Vector2(minX + width, minY) },
1
);
}
plan.Freeze();
Console.WriteLine(SvgRoomVisualiser.FloorplanToSvg(_plan));
}
public void FuzzTest()
{
Action <int, bool> iterate = (seed, catchit) =>
{
Random r = new Random(seed);
try
{
var plan = new GeometricFloorplan(new ReadOnlyCollection <Vector2>(new[] { new Vector2(-25, -25), new Vector2(-25, 25), new Vector2(25, 25), new Vector2(25, -25) }));
for (int j = 0; j < 3; j++)
{
var minX = r.Next(-25, 20);
var minY = r.Next(-25, 20);
var width = r.Next(10, 20);
var height = r.Next(10, 20);
plan.Add(new[] { new Vector2(minX, minY), new Vector2(minX, minY + height), new Vector2(minX + width, minY + height), new Vector2(minX + width, minY) }, 1);
}
plan.Freeze();
Console.WriteLine(SvgRoomVisualiser.FloorplanToSvg(_plan).ToString());
}
catch
{
if (!catchit)
{
throw;
}
else
{
Assert.Fail(string.Format("Failing seed = {0}", seed.ToString()));
}
}
};
for (var s = 0; s < 100; s++)
{
iterate(s * 2389, true);
}
}
public void TrainCarriageTest2()
{
// ReSharper disable InconsistentNaming
var r = new Random();
Func <double> Random = r.NextDouble;
const int Length = 20;
const int Width = 10;
Func <Vector2, float, float, Vector2> Offset = (start, length, width) => start + new Vector2(Length * length, -Width * width);
Func <IFloorPlanBuilder, bool, float, IEnumerable <IRoomPlan> > CreateBalcony = (pl, start, bl) =>
{
var p = pl.ExternalFootprint.First();
const float wt = 0.11f;
if (start)
{
return(pl.Add(new Vector2[]
{
Offset(p, 0, 0.01f),
Offset(p, bl / Length, 0.01f),
Offset(p, bl / Length, 0.99f),
Offset(p, 0, 0.99f),
}, wt));
}
else
{
return(pl.Add(new Vector2[]
{
Offset(p, 1 - (bl / Length), 0.01f),
Offset(p, 1, 0.01f),
Offset(p, 1, 0.99f),
Offset(p, 1 - bl / Length, 0.99f),
}, wt));
}
};
var plan = new GeometricFloorplan(new ReadOnlyCollection <Vector2>(new Vector2[]
{
new Vector2(-Length / 2f, Width / 2f),
new Vector2(Length / 2f, Width / 2f),
new Vector2(Length / 2f, -Width / 2f),
new Vector2(-Length / 2f, -Width / 2f),
}));
// ReSharper restore InconsistentNaming
//Create balconies on either end
float balconyLength = Math.Min(3, Length / 10f);
CreateBalcony(plan, true, balconyLength);
CreateBalcony(plan, false, balconyLength);
//Reference point to create rooms relative to
var point = plan.ExternalFootprint.First();
//Create corridor section along entire train (along one side)
const float CORRIDOR_WIDTH = 3;
plan.Add(new Vector2[]
{
Offset(point, (balconyLength + 0.05f) / Length, 0),
Offset(point, (Length - balconyLength - 0.05f) / Length, 0),
Offset(point, (Length - balconyLength - 0.05f) / Length, CORRIDOR_WIDTH / Width),
Offset(point, (balconyLength + 0.05f) / Length, CORRIDOR_WIDTH / Width),
}, 0.55f);
//Create compartments
var compartmentAreaLength = Length - (balconyLength + 0.05f) * 2;
var compartmentCount = Random.CompartmentalizeSpace(compartmentAreaLength, 1, int.MaxValue, 6, 10);
var compartmentLength = compartmentAreaLength / compartmentCount;
var compartments = new IRoomPlan[compartmentCount];
for (var i = 0; i < compartmentCount; i++)
{
var xStart = balconyLength + 0.05f + i * compartmentLength;
var xEnd = xStart + compartmentLength - 0.05f;
const float Y_START = CORRIDOR_WIDTH;
compartments[i] = plan.Add(new Vector2[]
{
Offset(point, xStart / Length, Y_START / Width),
Offset(point, xEnd / Length, Y_START / Width),
Offset(point, xEnd / Length, 1),
Offset(point, xStart / Length, 1),
}, 0.55f).Single();
}
plan.Freeze();
DrawPlan(plan);
}
public void TrainCarriageTest()
{
// ReSharper disable InconsistentNaming
var HierarchicalParameters = new NamedBoxCollection();
var r = new Random();
Func <double> Random = r.NextDouble;
const float Length = 60;
const float Width = 20;
Func <Vector2, float, float, Vector2> Offset = (start, length, width) => start + new Vector2(Length * length, -Width * width);
Func <IFloorPlanBuilder, bool, float, IEnumerable <IRoomPlan> > CreateBalcony = (pl, start, bl) =>
{
var p = pl.ExternalFootprint.First();
var wt = HierarchicalParameters.InternalWallThickness(Random);
if (start)
{
return(pl.Add(new Vector2[]
{
Offset(p, 0, 0.01f),
Offset(p, bl / Length, 0.01f),
Offset(p, bl / Length, 0.99f),
Offset(p, 0, 0.99f),
}, wt));
}
else
{
return(pl.Add(new Vector2[]
{
Offset(p, 1 - (bl / Length), 0.01f),
Offset(p, 1, 0.01f),
Offset(p, 1, 0.99f),
Offset(p, 1 - bl / Length, 0.99f),
}, wt));
}
};
var plan = new GeometricFloorplan(new ReadOnlyCollection <Vector2>(new Vector2[]
{
new Vector2(-Length / 2f, Width / 2f),
new Vector2(Length / 2f, Width / 2f),
new Vector2(Length / 2f, -Width / 2f),
new Vector2(-Length / 2f, -Width / 2f),
}));
// ReSharper restore InconsistentNaming
//Get some style values
var wallThickness = HierarchicalParameters.InternalWallThickness(Random);
var doorWidth = HierarchicalParameters.StandardDoorWidth(Random);
//Create balconies on either end
float balconyLength = Math.Min(3, Length / 10f);
var balcony1 = CreateBalcony(plan, true, balconyLength).Single();
var balcony2 = CreateBalcony(plan, false, balconyLength).Single();
//Reference point to create rooms relative to
var point = plan.ExternalFootprint.First();
//Add toilets at one end of the carriage
float toiletLength = balconyLength;
//Left of the corridor
var toiletLeft = plan.Add(new Vector2[]
{
Offset(point, balconyLength / Length, 0),
Offset(point, (balconyLength + toiletLength) / Length, 0),
Offset(point, (balconyLength + toiletLength) / Length, (Width / 2 - doorWidth / 2) / Width),
Offset(point, balconyLength / Length, (Width / 2 - doorWidth / 2) / Width),
}, wallThickness).Single();
//Right of the corridor
var toiletRight = plan.Add(new Vector2[]
{
Offset(point, balconyLength / Length, (Width / 2 + doorWidth / 2) / Width),
Offset(point, (balconyLength + toiletLength) / Length, (Width / 2 + doorWidth / 2) / Width),
Offset(point, (balconyLength + toiletLength) / Length, 1),
Offset(point, balconyLength / Length, 1),
}, wallThickness).Single();
//Corridor
var corridorL = (Width / 2 - doorWidth / 2 + 0.01f) / Width;
var corridorR = (Width / 2 + doorWidth / 2 - 0.01f) / Width;
var corridor = plan.Add(new Vector2[]
{
Offset(point, balconyLength / Length, corridorL),
Offset(point, (balconyLength + toiletLength) / Length, corridorL),
Offset(point, (balconyLength + toiletLength) / Length, corridorR),
Offset(point, balconyLength / Length, corridorR),
}, wallThickness).Single();
//Add dining room
var diningRoom = plan.Add(new Vector2[]
{
Offset(point, (balconyLength + toiletLength + 0.05f) / Length, 0),
Offset(point, (Length - balconyLength - 0.05f) / Length, 0),
Offset(point, (Length - balconyLength - 0.05f) / Length, 1),
Offset(point, (balconyLength + toiletLength + 0.05f) / Length, 1),
}, wallThickness).Single();
plan.Freeze();
DrawPlan(plan);
Assert.IsFalse(balcony2.Neighbours.Any(a => a.Other(balcony2) != diningRoom));
Assert.IsNotNull(balcony1);
Assert.IsNotNull(balcony2);
Assert.IsNotNull(toiletLeft);
Assert.IsNotNull(toiletRight);
Assert.IsNotNull(corridor);
Assert.IsNotNull(diningRoom);
}
