private void run(String reader_uri)
{
try
{
String PARAM_STR_REGION = "/reader/region/id";
String PARAM_STR_SESSION = "/reader/gen2/session";
String PARAM_STR_READPLAN = "/reader/read/plan";
Console.WriteLine(String.Format("Connecting to {0}", reader_uri));
//Create the reader
reader = Reader.Create(reader_uri);
try
{
//Uncomment this line to add default transport listener.
//reader.Transport += reader.SimpleTransportListener;
//Connect to the reader
reader.Connect();
//Set the region to NA
if (Reader.Region.UNSPEC == (Reader.Region)reader.ParamGet(PARAM_STR_REGION))
{
Reader.Region[] supportedRegions = (Reader.Region[])reader.ParamGet("/reader/region/supportedRegions");
if (supportedRegions.Length < 1)
{
throw new FAULT_INVALID_REGION_Exception();
}
else
{
reader.ParamSet(PARAM_STR_REGION, supportedRegions[0]);
}
}
//Set the session to session 0
reader.ParamSet(PARAM_STR_SESSION, Gen2.Session.S0);
//Get the region
Reader.Region region = (Reader.Region)reader.ParamGet(PARAM_STR_REGION);
Console.WriteLine("The current region is " + region);
//Get the session
Gen2.Session session = (Gen2.Session)reader.ParamGet(PARAM_STR_SESSION);
Console.WriteLine("The current session is " + session);
//Get the read plan
ReadPlan rp = (ReadPlan)reader.ParamGet(PARAM_STR_READPLAN);
Console.WriteLine("The current Read Plan is: " + rp);
//Create the Get Calibration Data tag operation
Gen2.IDS.SL900A.GetCalibrationData getCal_tagop = new Gen2.IDS.SL900A.GetCalibrationData();
//Use the Get Calibration Data (and SFE Parameters) tag op
Gen2.IDS.SL900A.CalSfe calSfe = (Gen2.IDS.SL900A.CalSfe)reader.ExecuteTagOp(getCal_tagop, null);
//Save the current Cal to restore it to the tag after the test
Gen2.IDS.SL900A.CalibrationData restore_cal = (Gen2.IDS.SL900A.CalibrationData)calSfe.Cal;
//Display the Calibration (and SFE Parameters) Data
Console.WriteLine("Detected Calibration: " + calSfe);
//Set the Calibration Data to 0x0123456789ABCD (56 bits)
byte[] test_cal_byte_array = new byte[7] {
0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD
};
Gen2.IDS.SL900A.CalibrationData test_cal = new Gen2.IDS.SL900A.CalibrationData(test_cal_byte_array, 0);
//Execute the Set Calibration Data command with test_cal to change its value
reader.ExecuteTagOp(new Gen2.IDS.SL900A.SetCalibrationData(test_cal), null);
//Use Get Calibration Data to retrieve the new Calibration (and SFE Parameters) from the tag
Gen2.IDS.SL900A.CalSfe verification_calSfe = (Gen2.IDS.SL900A.CalSfe)reader.ExecuteTagOp(getCal_tagop, null);
//Get the Cal data from the CalSfe data
Gen2.IDS.SL900A.CalibrationData verification_cal = (Gen2.IDS.SL900A.CalibrationData)verification_calSfe.Cal;
//Print the verificationCal
Console.WriteLine("Verification Cal: " + verification_cal.ToString());
//Ensure that the Calibration Data we set matches the current Calibration Data
Console.WriteLine("Set Calibration Data Succeeded? " + test_cal.ToString().Equals(verification_cal.ToString()));
//Restore the starting Calibration Data
reader.ExecuteTagOp(new Gen2.IDS.SL900A.SetCalibrationData(restore_cal), null);
//Get CalSfe of the restored tag
Gen2.IDS.SL900A.CalSfe restored_calSfe = (Gen2.IDS.SL900A.CalSfe)reader.ExecuteTagOp(getCal_tagop, null);
//Make sure that CalSfe is now the same as it was before the test
Console.WriteLine("Restore Calibration Data Succeeded? " + calSfe.ToString().Equals(restored_calSfe.ToString()));
}
finally
{
//Disconnect from the reader
reader.Destroy();
}
}
catch (Exception e)
{
Console.WriteLine("Error: " + e.Message);
}
}
private void run(String reader_uri)
{
try
{
String PARAM_STR_REGION = "/reader/region/id";
String PARAM_STR_SESSION = "/reader/gen2/session";
String PARAM_STR_READPLAN = "/reader/read/plan";
Console.WriteLine(String.Format("Connecting to {0}", reader_uri));
//Create the reader
reader = Reader.Create(reader_uri);
try
{
//Uncomment this line to add default transport listener.
//reader.Transport += reader.SimpleTransportListener;
//Connect to the reader
reader.Connect();
//Set the region to NA
if (Reader.Region.UNSPEC == (Reader.Region)reader.ParamGet(PARAM_STR_REGION))
{
Reader.Region[] supportedRegions = (Reader.Region[])reader.ParamGet("/reader/region/supportedRegions");
if (supportedRegions.Length < 1)
{
throw new FAULT_INVALID_REGION_Exception();
}
else
{
reader.ParamSet(PARAM_STR_REGION, supportedRegions[0]);
}
}
string model = reader.ParamGet("/reader/version/model").ToString();
if ((model.Equals("M6e Micro") || model.Equals("M6e Nano") || model.Equals("Sargas")) && antennaList == null)
{
Console.WriteLine("Module doesn't has antenna detection support please provide antenna list");
Usage();
}
//Use first antenna for operation
if (antennaList != null)
{
reader.ParamSet("/reader/tagop/antenna", antennaList[0]);
}
//Set the session to session 0
reader.ParamSet(PARAM_STR_SESSION, Gen2.Session.S0);
//Get the region
Reader.Region region = (Reader.Region)reader.ParamGet(PARAM_STR_REGION);
Console.WriteLine("The current region is " + region);
//Get the session
Gen2.Session session = (Gen2.Session)reader.ParamGet(PARAM_STR_SESSION);
Console.WriteLine("The current session is " + session);
//Get the read plan
ReadPlan rp = (ReadPlan)reader.ParamGet(PARAM_STR_READPLAN);
Console.WriteLine("The current Read Plan is: " + rp);
//Create the Get Calibration Data tag operation
Gen2.IDS.SL900A.GetCalibrationData getCal_tagop = new Gen2.IDS.SL900A.GetCalibrationData();
//Use the Get Calibration Data (and SFE Parameters) tag op
Gen2.IDS.SL900A.CalSfe calSfe = (Gen2.IDS.SL900A.CalSfe)reader.ExecuteTagOp(getCal_tagop, null);
//Save the current Sfe to restore it to the tag after the test
Gen2.IDS.SL900A.SfeParameters restore_sfe = (Gen2.IDS.SL900A.SfeParameters)calSfe.Sfe;
//Display the Calibration (and SFE Parameters) Data
Console.WriteLine("Detected Calibration: " + calSfe);
//Set the Sfe Parameters to 0xBEEF (16 bits)
byte[] test_sfe_byte_array = new byte[2] {
0xBE, 0xEF
};
Gen2.IDS.SL900A.SfeParameters test_sfe = new Gen2.IDS.SL900A.SfeParameters(test_sfe_byte_array, 0);
//Execute the Set Calibration Data command with test_cal to change its value
reader.ExecuteTagOp(new Gen2.IDS.SL900A.SetSfeParameters(test_sfe), null);
//Use Get Calibration Data to retrieve the new Calibration (and SFE Parameters) from the tag
Gen2.IDS.SL900A.CalSfe verification_calSfe = (Gen2.IDS.SL900A.CalSfe)reader.ExecuteTagOp(getCal_tagop, null);
//Get the Sfe data from the CalSfe data
Gen2.IDS.SL900A.SfeParameters verification_sfe = (Gen2.IDS.SL900A.SfeParameters)verification_calSfe.Sfe;
//Ensure that the Calibration Data we set matches the current Calibration Data
Console.WriteLine("Set SFE Parameters Succeeded? " + test_sfe.ToString().Equals(verification_sfe.ToString()));
//Restore the starting SFE Parameters
reader.ExecuteTagOp(new Gen2.IDS.SL900A.SetSfeParameters(restore_sfe), null);
//Get CalSfe of the restored tag
Gen2.IDS.SL900A.CalSfe restored_calSfe = (Gen2.IDS.SL900A.CalSfe)reader.ExecuteTagOp(getCal_tagop, null);
//Make sure that CalSfe is now the same as it was before the test
Console.WriteLine("Restore Calibration Data Succeeded? " + calSfe.ToString().Equals(restored_calSfe.ToString()));
}
finally
{
//Disconnect from the reader
reader.Destroy();
}
}
catch (Exception e)
{
Console.WriteLine("Error: " + e.Message);
}
}
private void run(String reader_uri)
{
try
{
String PARAM_STR_REGION = "/reader/region/id";
String PARAM_STR_SESSION = "/reader/gen2/session";
String PARAM_STR_READPLAN = "/reader/read/plan";
Console.WriteLine(String.Format("Connecting to {0}", reader_uri));
//Create the reader
reader = Reader.Create(reader_uri);
try
{
//Uncomment this line to add default transport listener.
//reader.Transport += reader.SimpleTransportListener;
//Connect to the reader
reader.Connect();
//Set the region to NA
if (Reader.Region.UNSPEC == (Reader.Region)reader.ParamGet(PARAM_STR_REGION))
{
Reader.Region[] supportedRegions = (Reader.Region[])reader.ParamGet("/reader/region/supportedRegions");
if (supportedRegions.Length < 1)
{
throw new FAULT_INVALID_REGION_Exception();
}
else
{
reader.ParamSet(PARAM_STR_REGION, supportedRegions[0]);
}
}
string model = reader.ParamGet("/reader/version/model").ToString();
if ((model.Equals("M6e Micro") || model.Equals("M6e Nano") || model.Equals("Sargas")) && antennaList == null)
{
Console.WriteLine("Module doesn't has antenna detection support please provide antenna list");
Usage();
}
//Use first antenna for operation
if (antennaList != null)
{
reader.ParamSet("/reader/tagop/antenna", antennaList[0]);
}
//Set the session to session 0
reader.ParamSet(PARAM_STR_SESSION, Gen2.Session.S0);
//Get the region
Reader.Region region = (Reader.Region)reader.ParamGet(PARAM_STR_REGION);
Console.WriteLine("The current region is " + region);
//Get the session
Gen2.Session session = (Gen2.Session)reader.ParamGet(PARAM_STR_SESSION);
Console.WriteLine("The current session is " + session);
//Get the read plan
ReadPlan rp = (ReadPlan)reader.ParamGet(PARAM_STR_READPLAN);
Console.WriteLine("The current Read Plan is: " + rp);
//Create the Get Calibration Data tag operation
Gen2.IDS.SL900A.GetCalibrationData tagOp = new Gen2.IDS.SL900A.GetCalibrationData();
//Use the Get Calibration Data (and SFE Parameters) tag op
Gen2.IDS.SL900A.CalSfe calSfe = (Gen2.IDS.SL900A.CalSfe)reader.ExecuteTagOp(tagOp, null);
//Display the Calibration (and SFE Parameters) Data
Console.WriteLine(calSfe);
//Display the specific Calibration data gnd_switch
Console.WriteLine("gnd_switch: " + calSfe.Cal.GndSwitch);
//Display the specific SFE Parameter Verify Sensor ID
Console.WriteLine("Verify Sensor ID: " + calSfe.Sfe.VerifySensorID);
}
finally
{
//Disconnect from the reader
reader.Destroy();
}
}
catch (Exception e) {
Console.WriteLine("Error: " + e.Message);
}
}
