//20141106 이원규 (SEM_UDP)
private void btnSave_Click(object sender, EventArgs e)
{
string dstrUDPIP = "";
string dstrUDPPort = "";
try
{
this.btnSave.Enabled = false;
if (this.rdoEnable.Checked == true)
{
try
{
if (PInfo.All.UDPRecvPort == null)
{
this.PInfo.All.UDP_IP = IPAddress.Parse(this.tbxIP.Text);
this.PInfo.All.UDP_PORT = Convert.ToInt32(this.tbxPort.Text);
this.PInfo.All.SEMAlarmTime = Convert.ToInt32(this.cboAlarmTime.Text.Trim());
dstrUDPIP = this.PInfo.All.UDP_IP.ToString();
dstrUDPPort = this.PInfo.All.UDP_PORT.ToString();
//포트연결시도를한다.
this.PInfo.subPLCCommand_Set(InfoAct.clsInfo.PLCCommand.UDPPortOpen);
//SEM Controller에 Start명령을 내린다.
this.PInfo.subPLCCommand_Set(InfoAct.clsInfo.PLCCommand.SEMControllerStart);
FunINIMethod.subINIWriteValue("SEM", "UDP_PORT", dstrUDPPort, this.PInfo.All.SystemINIFilePath);
FunINIMethod.subINIWriteValue("SEM", "UDP_IP", dstrUDPIP, this.PInfo.All.SystemINIFilePath);
FunINIMethod.subINIWriteValue("SEM", "SEM_AlarmTime", this.PInfo.All.SEMAlarmTime.ToString(), this.PInfo.All.SystemINIFilePath);
}
else
{
MessageBox.Show("UDP Port가 Open되어 있습니다.");
}
}
catch (UnauthorizedAccessException ex)
{
//사용할수 없는 포트
MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK);
this.btnSave.Enabled = true;
return;
}
}
else
{
//SEM Controller에 End명령을 내리고 포트를 닫는다.
this.PInfo.subPLCCommand_Set(InfoAct.clsInfo.PLCCommand.SEMControllerEnd);
this.PInfo.subPLCCommand_Set(InfoAct.clsInfo.PLCCommand.UDPPortClose);
}
this.Hide();
}
catch (Exception ex)
{
this.PInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, ex.ToString());
}
}
private void btnSave_Click(object sender, EventArgs e)
{
SerialPort spPort;
string dstrBaudRate = "";
string dstrComPort = "";
try
{
this.btnSave.Enabled = false;
if (this.rdoEnable.Checked == true)
{
try
{
//포트 오픈 테스트를 한다.======================================================
dstrComPort = this.cboPort.Text.Trim();
spPort = new SerialPort(dstrComPort, 115200, Parity.Even, 8, StopBits.One);
spPort.Open();
if (spPort.IsOpen)
{
spPort.Close();
}
//==============================================================================
this.PInfo.All.CommPort = this.cboPort.Text.Trim();
dstrBaudRate = this.cboBaudRate.Text.Trim();
this.PInfo.All.CommSetting = dstrBaudRate + ",e,8,1";
this.PInfo.All.SEMAlarmTime = Convert.ToInt32(this.cboAlarmTime.Text.Trim());
//포트연결시도를한다.
this.PInfo.subPLCCommand_Set(InfoAct.clsInfo.PLCCommand.SerialPortOpen);
//SEM Controller에 Start명령을 내린다.
this.PInfo.subPLCCommand_Set(InfoAct.clsInfo.PLCCommand.SEMControllerStart);
FunINIMethod.subINIWriteValue("SEM", "SEM_Port", dstrComPort, this.PInfo.All.SystemINIFilePath);
FunINIMethod.subINIWriteValue("SEM", "SEM_BaudRate", dstrBaudRate, this.PInfo.All.SystemINIFilePath);
FunINIMethod.subINIWriteValue("SEM", "SEM_AlarmTime", this.PInfo.All.SEMAlarmTime.ToString(), this.PInfo.All.SystemINIFilePath);
}
catch (UnauthorizedAccessException ex)
{
//사용할수 없는 포트
MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK);
this.btnSave.Enabled = true;
}
}
else
{
//SEM Controller에 End명령을 내리고 포트를 닫는다.
this.PInfo.subPLCCommand_Set(InfoAct.clsInfo.PLCCommand.SEMControllerEnd);
}
this.Hide();
}
catch (Exception ex)
{
this.PInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, ex.ToString());
}
}
private void subSaveLastModified()
{
string dstrSection = "";
string dstrDate = "";
try
{
dstrSection = "ALARMLastModified";
dstrDate = DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss");
FunINIMethod.subINIWriteValue("ETCInfo", dstrSection, dstrDate, pInfo.All.SystemINIFilePath);
//this.lblLastModified.Text = dstrDate;
}
catch (Exception ex)
{
pInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, ex.ToString());
}
}
public void Save()
{
try
{
FunINIMethod.subINIWriteValue("ETCInfo", "EQPID", this.txtEQPID.Text, pInfo.All.SystemINIFilePath);
FunINIMethod.subINIWriteValue("ETCInfo", "MDLN", this.txtMDLN.Text, pInfo.All.SystemINIFilePath);
//Process Data Days to Keep 관련 저장
FunINIMethod.subINIWriteValue("ETCInfo", "KEEPDAYS", this.txtKeepDays.Text, pInfo.All.SystemINIFilePath);
pInfo.EQP("Main").EQPID = this.txtEQPID.Text;
pInfo.All.MDLN = this.txtMDLN.Text;
pInfo.All.ProcDataKeepDays = Convert.ToInt32(txtKeepDays.Text);
subSaveLastModified(); //최종 수정된 날짜를 Ini파일에 저장한다.
MessageBox.Show("Data Save Success!", "Jobs Complete", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
catch (Exception ex)
{
pInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, ex.ToString());
}
}
/// <summary>
/// 설비에서 CIM으로 발생하는 Event에 대한 처리
/// </summary>
/// <param name="parameters">Parameter Array</param>
/// <remarks>
/// parameters[0] : strCompBit
/// parameters[1] : dstrACTVal
/// parameters[2] : dintActFrom
/// parameters[3] : dstrACTFromSub
/// parameters[4] : intBitVal
/// parameters[5] : Special Parameter
/// </remarks>
public void funProcessEQPEvent(string[] parameters)
{
string strCompBit = parameters[0];
string strEOIDItem = parameters[1];
string[] dstrValue;
string dstrWordAddress = "";
string dstrLog = "";
int dintIndex = 0;
string dstrSection = "EOIDLastModified";
int dintReadingEOV = 0;
string dstrAfterEOV = "";
SortedList dHT = new SortedList();
string dstrSQL;
string[] dstrData;
try
{
dintIndex = pInfo.funGetEOIDItemToIndex(strEOIDItem); //tbEOID 테이블의 항목에 해당하는 Index 컬럼값
switch (strEOIDItem)
{
//case "VCR":
// dstrWordAddress = "W1511"; //VCR Reading Mode
// break;
case "APC":
dstrWordAddress = "W1512"; //Wait time for glassid key-input(At reading fail)
break;
}
m_pEqpAct.subWordReadSave(dstrWordAddress, 1, EnuEQP.PLCRWType.Int_Data); //VCR Reading Mode
dstrValue = m_pEqpAct.funWordReadAction(true);
//PLC Req에 대한 CIM의 Confirm Bit를 준다.
m_pEqpAct.subSetConfirmBit(strCompBit);
dintReadingEOV = Convert.ToInt32(dstrValue[0]);
//만약 현재 EOV와 같은 값이 오면 처리를 하지 않는다.
if (pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOV == dintReadingEOV)
{
}
else
{
dstrAfterEOV = dstrAfterEOV + dintIndex.ToString() + ";"; //EOID 저장
dHT.Add(dintIndex, pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOV); //변경전의 EOID Index, EOV 저장
//구조체 변경
pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOV = dintReadingEOV;
//DB Update
dstrSQL = "Update tbEOID set EOV=" + dintReadingEOV + " Where Index=" + dintIndex.ToString();
if (DBAct.clsDBAct.funExecuteQuery(dstrSQL) == false)
{
pInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, "DB Update Fail: EOID Index: " + dintIndex.ToString());
}
//변경된 EOV에 대해 HOST 보고
dstrData = dstrAfterEOV.Split(new char[] { ';' });
if (dstrData.Length > 1)
{
if (pInfo.All.EOIDChangeBYWHO == "1" || pInfo.All.EOIDChangeBYWHO == "2")
{
//HOST나 OP에서 발생한것임
}
else
{
pInfo.All.EOIDChangeBYWHO = "3"; //BY Equipment
}
//HOST로 EOV값 변경 보고
pInfo.subSendSF_Set(InfoAct.clsInfo.SFName.S6F11RelatedEquipmentParameterEvent, 101, dstrAfterEOV); //마지막 인자는 EOID Index임
pInfo.All.EOIDChangeBYWHO = ""; //초기화
//변경 이력 로그 저장
foreach (DictionaryEntry de in dHT)
{
dstrLog = dstrLog + "EOID" + ",";
dstrLog = dstrLog + DateTime.Now.ToString("yyyyMMddHHmmss") + ",";
dstrLog = dstrLog + "변경" + ",";
dstrLog = dstrLog + pInfo.All.UserID + ",";
dstrLog = dstrLog + pInfo.Unit(0).SubUnit(0).EOID(Convert.ToInt32(de.Key)).DESC + ",";
dstrLog = dstrLog + de.Value.ToString() + ",";
dstrLog = dstrLog + pInfo.Unit(0).SubUnit(0).EOID(Convert.ToInt32(de.Key)).EOV;
pInfo.subLog_Set(InfoAct.clsInfo.LogType.Parameter, dstrLog); //로그 출력
dstrLog = ""; //초기화
}
}
//System.ini 파일에 변경 날짜 갱신
FunINIMethod.subINIWriteValue("ETCInfo", dstrSection, DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"), pInfo.All.SystemINIFilePath);
}
}
catch (Exception ex)
{
pInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, ex.ToString());
}
finally
{
}
}
/// <summary>
/// 설비에서 CIM으로 발생하는 Event에 대한 처리
/// </summary>
/// <param name="parameters">Parameter Array</param>
/// <remarks>
/// parameters[0] : strCompBit
/// parameters[1] : dstrACTVal
/// parameters[2] : dintActFrom
/// parameters[3] : dstrACTFromSub
/// parameters[4] : intBitVal
/// parameters[5] : Special Parameter
/// </remarks>
public void funProcessEQPEvent(string[] parameters)
{
string strCompBit = parameters[0];
string dstrWordAddress = "";
StringBuilder dstrLog = new StringBuilder();
int dintLength = 0;
string dstrTemp = "";
int dintBodyIndex = 3; //PPID Body Index
string dstrAfterHOSTPPID = "";
string dstrAfterEQPPPID = "";
string dstrBeforeEQPPPID = "";
int dintAfterPPIDType = 0;
string[] dstrAfterValue;
try
{
dstrWordAddress = "W2040";
//m_pEqpAct.subWordReadSave(dstrWordAddress, 10, EnuEQP.PLCRWType.ASCII_Data); //HOST PPID
m_pEqpAct.subWordReadSave(dstrWordAddress, 1, EnuEQP.PLCRWType.Int_Data); //EQP PPID
m_pEqpAct.subWordReadSave("", 10, EnuEQP.PLCRWType.Int_Data); //Spare
m_pEqpAct.subWordReadSave("", 1, EnuEQP.PLCRWType.Int_Data); //PPID Type
//for (int dintLoop = 1; dintLoop <= pInfo.Unit(0).SubUnit(0).PPIDBodyCount; dintLoop++)
//{
// dintLength = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length;
// m_pEqpAct.subWordReadSave("", dintLength, EnuEQP.PLCRWType.Int_Data); //Body
//}
dstrAfterValue = m_pEqpAct.funWordReadAction(true);
//PLC Req에 대한 CIM의 Confirm Bit를 준다.5
m_pEqpAct.subSetConfirmBit(strCompBit);
dstrAfterHOSTPPID = dstrAfterValue[0];
dstrAfterEQPPPID = dstrAfterValue[1];
dintAfterPPIDType = Convert.ToInt32(dstrAfterValue[3]);
if (pInfo.Unit(0).SubUnit(0).HOSTPPID(dstrAfterHOSTPPID) == null)
{
pInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, string.Format("존재하지 않는 HostPPID: {0} 에 대한 Mapping 변경 보고됨.", dstrAfterHOSTPPID));
return;
}
if (pInfo.Unit(0).SubUnit(0).EQPPPID(dstrAfterEQPPPID) == null)
{
pInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, string.Format("HostPPID: {0} 에 존재하지 않는 EQPPPID: {1} Mapping 변경 보고됨.", dstrAfterHOSTPPID, dstrAfterEQPPPID));
return;
}
dstrBeforeEQPPPID = pInfo.Unit(0).SubUnit(0).HOSTPPID(dstrAfterHOSTPPID).EQPPPID;
pInfo.Unit(0).SubUnit(0).HOSTPPID(dstrAfterHOSTPPID).EQPPPID = dstrAfterEQPPPID;
//로그를 출력한다.
dstrLog.Append(FunStringH.funPaddingStringData("-", 30, '-') + "\r\n");
dstrLog.Append("HOST PPID Mapping 수정(After Data)" + "\r\n");
dstrLog.Append("AfterHOSTPPID:" + dstrAfterHOSTPPID + ",");
dstrLog.Append("AfterEQPPPID:" + dstrAfterEQPPPID + ",");
dstrLog.Append("AfterPPIDType:" + dintAfterPPIDType.ToString() + "\r\n");
//for (int dintLoop = 1; dintLoop <= pInfo.Unit(0).SubUnit(0).PPIDBodyCount; dintLoop++)
//{
// dstrTemp = FunStringH.funPoint(dstrAfterValue[dintBodyIndex + dintLoop - 1], pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format);
// dstrLog.Append(pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Name + ":" + dstrTemp + "\r\n");
//}
dstrLog.Append(FunStringH.funPaddingStringData("-", 30, '-') + "\r\n");
pInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, dstrLog.ToString());
//HOST로 HOST Mapping 변경 보고
//인자:변경(3), PPIDTYPE, HOSTPPID, EQPPPID
pInfo.subSendSF_Set(InfoAct.clsInfo.SFName.S7F107PPIDCreatDeleteAndPPBodyChangedReport, "3", dintAfterPPIDType, dstrAfterHOSTPPID, dstrAfterEQPPPID);
m_pEqpAct.subSetParameterLog("HOST PPID Mapping 수정", dstrAfterHOSTPPID, null, dstrBeforeEQPPPID, dstrAfterEQPPPID);
//최종 수정된 날짜 Ini에 변경
FunINIMethod.subINIWriteValue("ETCInfo", "RECIPELastModified", DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"), pInfo.All.SystemINIFilePath);
}
catch (Exception ex)
{
pInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, ex.ToString());
}
}
/// <summary>
/// 설비에서 CIM으로 발생하는 Event에 대한 처리
/// </summary>
/// <param name="parameters">Parameter Array</param>
/// <remarks>
/// parameters[0] : strCompBit
/// parameters[1] : dstrACTVal
/// parameters[2] : dintActFrom
/// parameters[3] : dstrACTFromSub
/// parameters[4] : intBitVal
/// parameters[5] : Special Parameter
/// </remarks>
public void funProcessEQPEvent(string[] parameters)
{
string strCompBit = parameters[0];
StringBuilder dstrLog = new StringBuilder();
string dstrEQPPPID = "";
int dintPPIDType = 0;
string dstrTemp = "";
string strWordAddress = "";
try
{
//m_pEqpAct.subWordReadSave("W2040", 10, EnuEQP.PLCRWType.ASCII_Data); //HOST PPID
dstrEQPPPID = m_pEqpAct.funWordRead("W2540", 1, EnuEQP.PLCRWType.Int_Data);
dintPPIDType = 1;
#region 수정 전
//pInfo.Unit(0).SubUnit(0).RemoveEQPPPID(dstrEQPPPID);
//strWordAddress = "W254C";
//if (pInfo.Unit(0).SubUnit(0).AddEQPPPID(dstrEQPPPID) == true)
//{
// for (int dintLoop = 1; dintLoop <= pInfo.Unit(0).SubUnit(0).PPIDBodyCount; dintLoop++)
// {
// //EQPPPID에 Body 저장
// if (pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).AddPPIDBody(dintLoop) == true)
// {
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).DESC = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).DESC;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Format = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Length = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).ModuleID = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).ModuleID;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Name = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Name;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Range = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Range;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Unit = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Unit;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).UseMode = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).UseMode;
// if (pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length == 2)
// {
// dstrTemp = FunStringH.funPoint(m_pEqpAct.funWordRead(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length, EnuEQP.PLCRWType.Int_Data), pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format);
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp;
// }
// else
// {
// dstrTemp = m_pEqpAct.funWordRead(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length, EnuEQP.PLCRWType.ASCII_Data);
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp;
// }
// strWordAddress = CommonAct.FunTypeConversion.funAddressAdd(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length);
// }
// }
//}
# endregion
#region 수정 후
int dintReadcount = (pInfo.Unit(0).SubUnit(0).PPIDBodyCount - 5) * 2;
string dstrReadData = "";
int dintLength = 0;
string strValue = "";
int dintStartIndex = 0;
strWordAddress = "W254C";
if (pInfo.Unit(0).SubUnit(0).AddEQPPPID(dstrEQPPPID) == true)
{
//if (pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBodyCount == 0)
//{
//[2015/04/20] PPID Body 값 Block으로 한번에(Add by HS)
dstrReadData = m_pEqpAct.funWordRead("W254C", dintReadcount, EnuEQP.PLCRWType.Hex_Data, false).Trim();
#region EQPPPID에 Body 저장
for (int dintLoop = 1; dintLoop <= pInfo.Unit(0).SubUnit(0).PPIDBodyCount - 5; dintLoop++)
{
if (pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).AddPPIDBody(dintLoop) == true)
{
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).DESC = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).DESC;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Format = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Length = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).ModuleID = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).ModuleID;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Name = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Name;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Range = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Range;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Unit = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Unit;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).UseMode = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).UseMode;
dintLength = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length * 4; //Length에 맞게 자를 문자열 개수를 가져온다.
dstrTemp = dstrReadData.Substring(dintStartIndex, dintLength);
if (pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length > 1)
{
string dstrTemp1 = dstrTemp.Substring(0, 4);
string dstrTemp2 = dstrTemp.Substring(4, 4);
dstrTemp = dstrTemp2 + dstrTemp1;
strValue = FunTypeConversion.funHexConvert(dstrTemp, EnuEQP.StringType.Decimal);
dstrTemp = FunStringH.funPoint(strValue, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format);
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp;
}
else
{
strValue = FunTypeConversion.funHexConvert(dstrTemp, EnuEQP.StringType.ASCString);
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = strValue;
}
dintStartIndex += dintLength;
#region 변경전 [2015.04.20] Modify by HS
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).DESC = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).DESC;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Format = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Length = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).ModuleID = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).ModuleID;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Name = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Name;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Range = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Range;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Unit = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Unit;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).UseMode = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).UseMode;
//if (pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length == 2)
//{
// dstrTemp = FunStringH.funPoint(m_pEqpAct.funWordRead(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length, EnuEQP.PLCRWType.Int_Data), pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format);
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp;
//}
//else
//{
// dstrTemp = m_pEqpAct.funWordRead(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length, EnuEQP.PLCRWType.ASCII_Data);
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp;
//}
//strWordAddress = CommonAct.FunTypeConversion.funAddressAdd(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length);
#endregion
}
}
#endregion
strWordAddress = CommonAct.FunTypeConversion.funAddressAdd(strWordAddress, dintReadcount);
dstrReadData = m_pEqpAct.funWordRead(strWordAddress, 80, EnuEQP.PLCRWType.ASCII_Data, false);
dintStartIndex = 0;
#region EQPPPID에 Film Code 저장
for (int dintLoop = 251; dintLoop <= 255; dintLoop++)
{
if (pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).AddPPIDBody(dintLoop) == true)
{
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).DESC = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).DESC;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Format = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Length = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).ModuleID = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).ModuleID;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Name = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Name;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Range = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Range;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Unit = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Unit;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).UseMode = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).UseMode;
dintLength = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length * 2; //Length에 맞게 자를 문자열 개수를 가져온다.
dstrTemp = dstrReadData.Substring(dintStartIndex, dintLength);
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp.Trim();
}
dintStartIndex += dintLength;
}
#endregion
//}
}
#endregion
//PLC Req에 대한 CIM의 Confirm Bit를 준다.
m_pEqpAct.subSetConfirmBit(strCompBit);
switch (dintPPIDType)
{
case 1: //EQP PPID
{
pInfo.subSendSF_Set(InfoAct.clsInfo.SFName.S7F107PPIDCreatDeleteAndPPBodyChangedReport, "3", "1", "", dstrEQPPPID);
ArrayList arrCon = new ArrayList();
InfoAct.clsHOSTPPID CurrentPPID;
foreach (string strPPID in pInfo.Unit(0).SubUnit(0).HOSTPPID())
{
CurrentPPID = pInfo.Unit(0).SubUnit(0).HOSTPPID(strPPID);
if (CurrentPPID.EQPPPID == dstrEQPPPID)
{
arrCon.Add(strPPID);
}
}
string dstrSQL = "";
for (int dintLoop = 0; dintLoop < arrCon.Count; dintLoop++)
{
pInfo.subSendSF_Set(InfoAct.clsInfo.SFName.S7F107PPIDCreatDeleteAndPPBodyChangedReport, "3", "2", arrCon[dintLoop].ToString(), dstrEQPPPID);
//pInfo.Unit(0).SubUnit(0).RemoveHOSTPPID(arrCon[dintLoop].ToString());
dstrSQL = string.Format("Update `tbHOSTPPID` set EQPPPID='{0}', DTime='{1}' Where HOSTPPID='{2}';", dstrEQPPPID, DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"), arrCon[dintLoop].ToString());
DBAct.clsDBAct.funExecuteQuery(dstrSQL);
}
}
break;
}
//최종 수정된 날짜 Ini에 변경
FunINIMethod.subINIWriteValue("ETCInfo", "RECIPELastModified", DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"), pInfo.All.SystemINIFilePath);
}
/// <summary>
/// 설비에서 CIM으로 발생하는 Event에 대한 처리
/// </summary>
/// <param name="parameters">Parameter Array</param>
/// <remarks>
/// parameters[0] : strCompBit
/// parameters[1] : dstrACTVal
/// parameters[2] : dintActFrom
/// parameters[3] : dstrACTFromSub
/// parameters[4] : intBitVal
/// parameters[5] : Special Parameter
/// </remarks>
public void funProcessEQPEvent(string[] parameters)
{
string strCompBit = parameters[0];
StringBuilder dstrLog = new StringBuilder();
string dstrEQPPPID = "";
int dintPPIDType = 0;
string dstrTemp = "";
string strWordAddress = "";
try
{
dstrEQPPPID = m_pEqpAct.funWordRead("W2540", 1, EnuEQP.PLCRWType.Int_Data);
dintPPIDType = 1;
pInfo.Unit(0).SubUnit(0).RemoveEQPPPID(dstrEQPPPID);
#region 수정 전
//strWordAddress = "W254C";
//if (pInfo.Unit(0).SubUnit(0).AddEQPPPID(dstrEQPPPID) == true)
//{
// for (int dintLoop = 1; dintLoop <= pInfo.Unit(0).SubUnit(0).PPIDBodyCount; dintLoop++)
// {
// //EQPPPID에 Body 저장
// if (pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).AddPPIDBody(dintLoop) == true)
// {
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).DESC = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).DESC;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Format = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Length = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).ModuleID = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).ModuleID;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Name = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Name;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Range = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Range;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Unit = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Unit;
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).UseMode = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).UseMode;
// if (pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length == 2)
// {
// dstrTemp = FunStringH.funPoint(m_pEqpAct.funWordRead(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length, EnuEQP.PLCRWType.Int_Data), pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format);
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp;
// }
// else
// {
// dstrTemp = m_pEqpAct.funWordRead(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length, EnuEQP.PLCRWType.ASCII_Data);
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp;
// }
// strWordAddress = CommonAct.FunTypeConversion.funAddressAdd(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length);
// }
// }
//}
#endregion
#region 수정 후
int dintReadcount = (pInfo.Unit(0).SubUnit(0).PPIDBodyCount - 5) * 2;
string dstrReadData = "";
int dintLength = 0;
string strValue = "";
int dintStartIndex = 0;
strWordAddress = "W254C";
if (pInfo.Unit(0).SubUnit(0).AddEQPPPID(dstrEQPPPID) == true)
{
//if (pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBodyCount == 0)
//{
//[2015/04/20] PPID Body 값 Block으로 한번에(Add by HS)
dstrReadData = m_pEqpAct.funWordRead("W254C", dintReadcount, EnuEQP.PLCRWType.Hex_Data, false).Trim();
#region EQPPPID에 Body 저장
for (int dintLoop = 1; dintLoop <= pInfo.Unit(0).SubUnit(0).PPIDBodyCount - 5; dintLoop++)
{
if (pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).AddPPIDBody(dintLoop) == true)
{
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).DESC = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).DESC;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Format = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Length = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).ModuleID = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).ModuleID;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Name = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Name;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Range = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Range;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Unit = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Unit;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).UseMode = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).UseMode;
dintLength = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length * 4; //Length에 맞게 자를 문자열 개수를 가져온다.
dstrTemp = dstrReadData.Substring(dintStartIndex, dintLength);
if (pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length > 1)
{
string dstrTemp1 = dstrTemp.Substring(0, 4);
string dstrTemp2 = dstrTemp.Substring(4, 4);
dstrTemp = dstrTemp2 + dstrTemp1;
strValue = FunTypeConversion.funHexConvert(dstrTemp, EnuEQP.StringType.Decimal);
dstrTemp = FunStringH.funPoint(strValue, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format);
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp;
}
else
{
strValue = FunTypeConversion.funHexConvert(dstrTemp, EnuEQP.StringType.ASCString);
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = strValue;
}
dintStartIndex += dintLength;
#region 변경전 [2015.04.20] Modify by HS
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).DESC = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).DESC;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Format = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Length = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).ModuleID = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).ModuleID;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Name = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Name;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Range = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Range;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Unit = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Unit;
//pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).UseMode = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).UseMode;
//if (pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length == 2)
//{
// dstrTemp = FunStringH.funPoint(m_pEqpAct.funWordRead(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length, EnuEQP.PLCRWType.Int_Data), pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format);
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp;
//}
//else
//{
// dstrTemp = m_pEqpAct.funWordRead(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length, EnuEQP.PLCRWType.ASCII_Data);
// pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp;
//}
//strWordAddress = CommonAct.FunTypeConversion.funAddressAdd(strWordAddress, pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length);
#endregion
}
}
#endregion
strWordAddress = CommonAct.FunTypeConversion.funAddressAdd(strWordAddress, dintReadcount);
dstrReadData = m_pEqpAct.funWordRead(strWordAddress, 80, EnuEQP.PLCRWType.ASCII_Data, false);
dintStartIndex = 0;
#region EQPPPID에 Film Code 저장
for (int dintLoop = 251; dintLoop <= 255; dintLoop++)
{
if (pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).AddPPIDBody(dintLoop) == true)
{
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).DESC = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).DESC;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Format = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Format;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Length = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).ModuleID = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).ModuleID;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Name = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Name;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Range = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Range;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Unit = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Unit;
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).UseMode = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).UseMode;
dintLength = pInfo.Unit(0).SubUnit(0).PPIDBody(dintLoop).Length * 2; //Length에 맞게 자를 문자열 개수를 가져온다.
dstrTemp = dstrReadData.Substring(dintStartIndex, dintLength);
pInfo.Unit(0).SubUnit(0).EQPPPID(dstrEQPPPID).PPIDBody(dintLoop).Value = dstrTemp.Trim();
}
dintStartIndex += dintLength;
}
#endregion
//}
}
#endregion
//PLC Req에 대한 CIM의 Confirm Bit를 준다.
m_pEqpAct.subSetConfirmBit(strCompBit);
switch (dintPPIDType)
{
case 1: //EQP PPID
//Parameter.log에 로그 출력
m_pEqpAct.subSetParameterLog("EQP PPID 생성", "", null, dstrEQPPPID, dstrEQPPPID);
int[] arrData = new int[16];
string strData = "";
if (pInfo.EQP("Main").DummyPLC)
{
foreach (string strEQPPID in pInfo.Unit(0).SubUnit(0).EQPPPID())
{
arrData[Convert.ToInt32(strEQPPID) - 1] = 1;
}
for (int dintLoop = 16; dintLoop > 0; dintLoop--)
{
strData += arrData[dintLoop - 1].ToString();
}
strData = CommonAct.FunTypeConversion.funBinConvert(strData, EnuEQP.StringType.Hex);
m_pEqpAct.funWordWrite("W2A00", strData, EnuEQP.PLCRWType.Hex_Data);
}
pInfo.subSendSF_Set(InfoAct.clsInfo.SFName.S7F107PPIDCreatDeleteAndPPBodyChangedReport, "1", "1", "", dstrEQPPPID);
break;
}
//최종 수정된 날짜 Ini에 변경
FunINIMethod.subINIWriteValue("ETCInfo", "RECIPELastModified", DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"), pInfo.All.SystemINIFilePath);
}
catch (Exception ex)
{
pInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, ex.ToString());
}
}
/// <summary>
/// Primary Message에 대해 처리한 후 Secondary Message를 Biuld하여 Driver에 전송한다.
/// </summary>
/// <param name="msgTran">Primary Message의 Transaction</param>
public void funPrimaryReceive(Transaction msgTran)
{
string dstrModuleID = "";
int dintEOIDTemp = 0;;
int dintEOIDCount = 0;
int dintEOID = 0;
int dintEOMD = 0;
int dintEOV = 0;
int dintEAC = 0;
int dintMIACK = 0;
string dstrEOIDIndex = "";
int dintIndex = 0;
int dintEOMDCount = 0;
string dstrSQL = "";
int dintMatchEOIDCount = 0; //한개라도 안 맞으면 적용안함 20130308
Boolean dbolEQPProcessTimeOverReset = false; //기존에 설정되어 있던 EQP Process Time Over 체크 설정을 다시 할지 여부
Boolean dbolSuccess = false;
bool dbolEOIDExist = true;
try
{
dstrModuleID = msgTran.Primary().Item("MODULEID").Getvalue().ToString().Trim();
//ModuleID가 존재하지 않는 경우
if (dstrModuleID != pInfo.Unit(3).SubUnit(0).ModuleID)
{
msgTran.Secondary().Item("MODULEID").Putvalue(dstrModuleID);
msgTran.Secondary().Item("MIACK").Putvalue(1);
msgTran.Secondary().Item("EOIDCOUNT").Putvalue(0);
funSendReply(msgTran);
return;
}
dintEOIDCount = Convert.ToInt32(msgTran.Primary().Item("EOIDCOUNT").Getvalue());
//EOID가 6이나 17이 아닌게 하나라도 있으면 NACK보고 후 리턴
//2011.01.13 송 은선
for (int dintLoop = 1; dintLoop <= dintEOIDCount; dintLoop++)
{
dintEOIDTemp = Convert.ToInt32(msgTran.Primary().Item("EOID" + (dintLoop - 1)).Getvalue());
if (pInfo.funGetEOIDToIndex(dintEOIDTemp) == 0)
{
dbolEOIDExist = false;
//msgTran.Secondary().Item("MODULEID").Putvalue(dstrModuleID);
//msgTran.Secondary().Item("MIACK").Putvalue(2);
//msgTran.Secondary().Item("EOIDCOUNT").Putvalue(0);
//funSendReply(msgTran);
//return;
}
}
msgTran.Secondary().Item("MODULEID").Putvalue(dstrModuleID);
msgTran.Secondary().Item("EOIDCOUNT").Putvalue(dintEOIDCount);
//받은 EOID중에 존재하지 않는것이 하나라도 있으면 NAK으로 보고하고 모두 적용하지 않는다.
for (int dintLoop = 1; dintLoop <= dintEOIDCount; dintLoop++)
{
dintEOMDCount = Convert.ToInt32(msgTran.Primary().Item("EOMDCOUNT" + (dintLoop - 1)).Getvalue());
for (int dintLoop2 = 1; dintLoop2 <= dintEOMDCount; dintLoop2++)
{
dintEOID = Convert.ToInt32(msgTran.Primary().Item("EOID" + (dintLoop - 1)).Getvalue());
dintEOMD = Convert.ToInt32(msgTran.Primary().Item("EOMD" + (dintLoop - 1) + (dintLoop2 - 1)).Getvalue());
dintEOV = Convert.ToInt32(msgTran.Primary().Item("EOV" + (dintLoop - 1) + (dintLoop2 - 1)).Getvalue());
//EOMD, EOMD값으로 Index를 찾는다.(Index가 Key값이기 떄문)
dintIndex = pInfo.funGetEOIDEOMDToIndex(dintEOID, dintEOMD);
if (pInfo.Unit(0).SubUnit(0).EOID(dintIndex) != null) //존재하는 EOID임.
{
//EOMD 유효성 검사
if (dintEOMD >= pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOMDMin&& dintEOMD <= pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOMDMax)
{
if (dintEOV >= pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOVMin&& dintEOV <= pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOVMax)
{
if (dintEOID == 8) //VCR Reading Mode는 0,1,2,3 만 값이 있다.(이외의 값이 오면 Error임.)
{
if (dintEOV == 0 || dintEOV == 1 || dintEOV == 2 || dintEOV == 3) //EOV값 정상
{
dintEAC = 0; //EOMD 정상
dintMatchEOIDCount += 1; //옳은 EOID 개수 누적
}
else
{
dintEAC = 3; //3 = Denied, At least one constant out of range
}
}
else
{
dintEAC = 0; //EOMD 정상
dintMatchEOIDCount += 1; //옳은 EOID 개수 누적
}
}
else
{
dintEAC = 3; //3 = Denied, At least one constant out of range
}
}
else
{
dintEAC = 1; //1 = Denied, At least one constant does not exist
}
}
else //존재하지 않는 EOID임.
{
dintEAC = 1; //1 = Denied, At least one constant does not exist
}
msgTran.Secondary().Item("EOID" + (dintLoop - 1)).Putvalue(dintEOID);
msgTran.Secondary().Item("EOMDCOUNT" + (dintLoop - 1)).Putvalue(dintEOMDCount);
msgTran.Secondary().Item("EOMD" + (dintLoop - 1) + (dintLoop2 - 1)).Putvalue(dintEOMD);
msgTran.Secondary().Item("EAC" + (dintLoop - 1) + (dintLoop2 - 1)).Putvalue(dintEAC);
}
}
//if (dbolEOIDExist == false)
//{
// dintMIACK = 2; //없는 EOID를 받았다.
//}
//else
{
dintMIACK = 0; //정상
}
msgTran.Secondary().Item("MIACK").Putvalue(dintMIACK);
//HOST로 S2F104 보고
funSendReply(msgTran);
//유효성 검사에서 OK이면 S6F11(CEID=101) 보고
if (dintMatchEOIDCount == dintEOIDCount)
{
pInfo.All.EOIDChangeBYWHO = "1"; //BY HOST
//구조체를 변경
for (int dintLoop = 1; dintLoop <= dintEOIDCount; dintLoop++)
{
dintEOMDCount = Convert.ToInt32(msgTran.Primary().Item("EOMDCOUNT" + (dintLoop - 1)).Getvalue());
for (int dintLoop2 = 1; dintLoop2 <= dintEOMDCount; dintLoop2++)
{
dintEOID = Convert.ToInt32(msgTran.Primary().Item("EOID" + (dintLoop - 1)).Getvalue());
dintEOMD = Convert.ToInt32(msgTran.Primary().Item("EOMD" + (dintLoop - 1) + (dintLoop2 - 1)).Getvalue());
dintEOV = Convert.ToInt32(msgTran.Primary().Item("EOV" + (dintLoop - 1) + (dintLoop2 - 1)).Getvalue());
//EOMD, EOMD값으로 Index를 찾는다.(Index가 Key값이기 떄문)
dintIndex = pInfo.funGetEOIDEOMDToIndex(dintEOID, dintEOMD);
if (pInfo.Unit(0).SubUnit(0).EOID(dintIndex) != null)
{
if (dintEOV >= pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOVMin&& dintEOV <= pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOVMax) // && dintEOV != this.PInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOV
{
//if (dintEOID == 8) //VCR Reading Mode는 0,1,2,3 만 값이 있다.(이외의 값이 오면 Error임.)
//{
// if (dintEOV == 0 || dintEOV == 1 || dintEOV == 2 || dintEOV == 3) //EOV값 정상
// {
// dbolSuccess = true;
// }
// else
// {
// dbolSuccess = false;
// }
//}
//else
{
dbolSuccess = true;
}
//True이면 업데이트 한다. 이때 EOV의 이전값과 바꾸는 값이 동일하면 넘어간다(S6F11 보고를 안하기 위해서임) - 같은값이 와도 보고해야됨(입고전검수) 20101208 KJK
if (dbolSuccess == true) // && dintEOV != this.PInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOV
{
#region "LOG 출력"
pInfo.subLog_Set(InfoAct.clsInfo.LogType.Parameter, string.Format("EOID,{0},변경,{1},{2},{3},{4}", DateTime.Now.ToString("yyyyMMddHHmmss"), pInfo.All.UserID, pInfo.Unit(0).SubUnit(0).EOID(dintIndex).DESC, pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOV, dintEOV)); //로그 출력
#endregion
this.pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOV = dintEOV;
dstrEOIDIndex = dstrEOIDIndex + dintIndex.ToString() + ";";
//DB Update
dstrSQL = "Update tbEOID set EOV=" + dintEOV.ToString() + " Where Index=" + dintIndex.ToString();
if (DBAct.clsDBAct.funExecuteQuery(dstrSQL) == false)
{
funSetLog(InfoAct.clsInfo.LogType.CIM, "DB Update Fail: EOID Index: " + dintIndex.ToString());
}
pInfo.DeleteTable("EOID");
dstrSQL = "SELECT * FROM tbEOID order by Index";
DataTable dt = DBAct.clsDBAct.funSelectQuery(dstrSQL);
pInfo.AddDataTable("EOID", dt);
pInfo.AddViewEvent(InfoAct.clsInfo.ViewEvent.EOIDUpdate);
switch (this.pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOID)
{
case 17: //MCC Reporting Mode (Decision to transfer MCC log file to File Server)
if (this.pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOV == 1)
{
FunINIMethod.subINIWriteValue("MCC", "MCCFileUploadUse", "True", this.pInfo.All.SystemINIFilePath);
this.pInfo.All.MCC_UPLOAD = true;
}
else
{
FunINIMethod.subINIWriteValue("MCC", "MCCFileUploadUse", "False", this.pInfo.All.SystemINIFilePath);
this.pInfo.All.MCC_UPLOAD = false;
}
break;
case 19: // SEM On/Off
if (this.pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOV == 1)
{
this.pInfo.subPLCCommand_Set(InfoAct.clsInfo.PLCCommand.UDPPortOpen);
this.pInfo.subPLCCommand_Set(InfoAct.clsInfo.PLCCommand.SEMControllerStart);
}
else
{
this.pInfo.subPLCCommand_Set(InfoAct.clsInfo.PLCCommand.SEMControllerEnd);
this.pInfo.subPLCCommand_Set(InfoAct.clsInfo.PLCCommand.UDPPortClose);
}
break;
case 21:
if (this.pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOV == 1)
{
//FunINIMethod.subINIWriteValue("MCC", "MCCFileUploadUse", "True", this.pInfo.All.SystemINIFilePath);
pInfo.All.APCUSE = true;
}
else
{
//FunINIMethod.subINIWriteValue("MCC", "MCCFileUploadUse", "False", this.pInfo.All.SystemINIFilePath);
pInfo.All.APCUSE = false;
}
break;
case 22:
if (this.pInfo.Unit(0).SubUnit(0).EOID(dintIndex).EOV == 1)
{
//FunINIMethod.subINIWriteValue("MCC", "MCCFileUploadUse", "True", this.pInfo.All.SystemINIFilePath);
pInfo.All.RPCUSE = true;
}
else
{
//FunINIMethod.subINIWriteValue("MCC", "MCCFileUploadUse", "False", this.pInfo.All.SystemINIFilePath);
pInfo.All.RPCUSE = false;
}
break;
default:
{
}
break;
}
}
dbolSuccess = false; //초기화
}
}
}
}
//CEID=101, Host로 보고
pInfo.subSendSF_Set(InfoAct.clsInfo.SFName.S6F11RelatedEquipmentParameterEvent, 101, dstrEOIDIndex); //마지막 인자는 EOID Index임
pInfo.All.EOIDChangeBYWHO = ""; //초기화
//최종 수정된 날짜 Ini에 변경
FunINIMethod.subINIWriteValue("ETCInfo", "EOIDLastModified", DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"), pInfo.All.SystemINIFilePath);
}
if (dbolEQPProcessTimeOverReset == true)
{
pInfo.All.EQPProcessTimeOverReset = true;
}
}
catch (Exception error)
{
funSetLog(InfoAct.clsInfo.LogType.CIM, error.ToString());
return;
}
}
/// <summary>
/// 설비에서 CIM으로 발생하는 Event에 대한 처리
/// </summary>
/// <param name="parameters">Parameter Array</param>
/// <remarks>
/// parameters[0] : strCompBit
/// parameters[1] : dstrACTVal
/// parameters[2] : dintActFrom
/// parameters[3] : dstrACTFromSub
/// parameters[4] : intBitVal
/// parameters[5] : Special Parameter
/// </remarks>
public void funProcessEQPEvent(string[] parameters)
{
string strCompBit = parameters[0];
int dintIndex = 0;
//int dintIndex2 = 0;
string dstrWordAddress = "";
string dstrECIDReport = "";
string dstrECSLL = "";
string dstrECWLL = "";
string dstrECDEF = "";
string dstrECWUL = "";
string dstrECSUL = "";
string dstrLog = "";
string dstrSQL = "";
string[] dstrValue = null;
int dintECID = 0;
string dstrECIDReadData = "";
string strData = "";
string dstrECID = "";
try
{
dstrWordAddress = "W2A00";
dstrECIDReadData = m_pEqpAct.funWordRead(dstrWordAddress, pInfo.Unit(0).SubUnit(0).ECIDCount * 7, EnuEQP.PLCRWType.Hex_Data);
//PLC Req에 대한 CIM의 Confirm Bit를 준다.
m_pEqpAct.subSetConfirmBit(strCompBit);
// 디비트랜젝션... 해야지..
if (DBAct.clsDBAct.funOleDbTransaction() == null)
{
DBAct.clsDBAct.funBeginTransaction();
}
OleDbTransaction odbTransaction = DBAct.clsDBAct.funOleDbTransaction();
for (int dintLoop = 1; dintLoop <= pInfo.Unit(0).SubUnit(0).ECIDCount; dintLoop++)
{
strData = dstrECIDReadData.Substring((dintLoop - 1) * 28, 28);
dstrECID = strData.Substring(0, 4);
dintECID = Convert.ToInt32(FunTypeConversion.funHexConvert(dstrECID, EnuEQP.StringType.Decimal)); //ECID
//dstrECSLL = strData.Substring(4, 8); // ECSLL
dstrECWLL = strData.Substring(4, 8);
dstrECWLL = dstrECWLL.Substring(4, 4) + dstrECWLL.Substring(0, 4);
dstrECDEF = strData.Substring(12, 8); // ECDEF
dstrECDEF = dstrECDEF.Substring(4, 4) + dstrECDEF.Substring(0, 4);
//dstrECSUL = strData.Substring(20, 8); // ECSUL
dstrECWUL = strData.Substring(20, 8);
dstrECWUL = dstrECWUL.Substring(4, 4) + dstrECWUL.Substring(0, 4);
//dstrECSLL = FunTypeConversion.funDecimalConvert(dstrECSLL, EnuEQP.StringType.Hex);
//dstrECDEF = FunTypeConversion.funDecimalConvert(dstrECDEF, EnuEQP.StringType.Hex);
//dstrECSUL = FunTypeConversion.funDecimalConvert(dstrECSUL, EnuEQP.StringType.Hex);
dstrECWLL = FunTypeConversion.funHexConvert(dstrECWLL, EnuEQP.StringType.Decimal);
dstrECDEF = FunTypeConversion.funHexConvert(dstrECDEF, EnuEQP.StringType.Decimal);
dstrECWUL = FunTypeConversion.funHexConvert(dstrECWUL, EnuEQP.StringType.Decimal);
////dstrECSLL = FunTypeConversion.funPlusMinusAPDCalc(dstrECSLL);
//dstrECWLL = FunTypeConversion.funPlusMinusAPDCalc(dstrECWLL);
//dstrECDEF = FunTypeConversion.funPlusMinusAPDCalc(dstrECDEF);
////dstrECSUL = FunTypeConversion.funPlusMinusAPDCalc(dstrECSUL);
//dstrECWUL = FunTypeConversion.funPlusMinusAPDCalc(dstrECWUL);
//dstrECSLL = FunStringH.funPoint(dstrECSLL, pInfo.Unit(0).SubUnit(0).ECID(dintLoop).Format);
dstrECWLL = FunStringH.funPoint(dstrECWLL, pInfo.Unit(0).SubUnit(0).ECID(dintLoop).Format);
dstrECDEF = FunStringH.funPoint(dstrECDEF, pInfo.Unit(0).SubUnit(0).ECID(dintLoop).Format);
//dstrECSUL = FunStringH.funPoint(dstrECSUL, pInfo.Unit(0).SubUnit(0).ECID(dintLoop).Format);
dstrECWUL = FunStringH.funPoint(dstrECWUL, pInfo.Unit(0).SubUnit(0).ECID(dintLoop).Format);
if (pInfo.Unit(0).SubUnit(0).ECID(dintECID) != null)
{
if (pInfo.Unit(0).SubUnit(0).ECID(dintECID).ECDEF != dstrECDEF ||
pInfo.Unit(0).SubUnit(0).ECID(dintECID).ECWLL != dstrECWLL ||
pInfo.Unit(0).SubUnit(0).ECID(dintECID).ECWUL != dstrECWUL)
// pInfo.Unit(0).SubUnit(0).ECID(dintECID).ECSLL != dstrECSLL ||
//pInfo.Unit(0).SubUnit(0).ECID(dintECID).ECSUL != dstrECSUL)
{
dstrECIDReport += dintLoop.ToString() + ";";
//로그 출력
//dstrLog = dstrLog + "ECID" + ",";
//dstrLog = dstrLog + DateTime.Now.ToString("yyyyMMddHHmmss") + ",";
//dstrLog = dstrLog + "변경" + ",";
//dstrLog = dstrLog + pInfo.All.UserID + ",";
//dstrLog = dstrLog + "ECID(" + dintLoop.ToString() + "): " + pInfo.Unit(0).SubUnit(0).ECID(dintLoop).DESC + ",";
//dstrLog = dstrLog + pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECSLL + ",";
//dstrLog = dstrLog + pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECDEF + ",";
//dstrLog = dstrLog + pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECSUL + ",";
//dstrLog = dstrLog + dstrECSLL + ",";
//dstrLog = dstrLog + dstrECWLL + ",";
//dstrLog = dstrLog + dstrECDEF + ",";
//dstrLog = dstrLog + dstrECWUL + ",";
//dstrLog = dstrLog + dstrECSUL;
dstrLog = string.Format("ECID,{0},변경,{1},ECID({2}): {3},{4} -> {5}, {6} -> {7}, {8} -> {9}",
DateTime.Now.ToString("yyyyMMddHHmmss"),
pInfo.All.UserID,
dintLoop.ToString(),
pInfo.Unit(0).SubUnit(0).ECID(dintLoop).DESC,
pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECWLL,
dstrECWLL,
pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECDEF,
dstrECDEF,
pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECWUL,
dstrECWUL
);
pInfo.subLog_Set(InfoAct.clsInfo.LogType.Parameter, dstrLog); //로그 출력
dstrLog = ""; //초기화
//구조체 업데이트
pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECSLL = dstrECWLL;
pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECWLL = dstrECWLL;
pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECDEF = dstrECDEF;
pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECWUL = dstrECWUL;
pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECSUL = dstrECWUL;
dstrSQL = "Update tbECID set ECSLL=" + pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECSLL + ", ECWLL=" + dstrECWLL + ", ECDEF=" + dstrECDEF +
", ECWUL=" + dstrECWUL + ", ECSUL=" + pInfo.Unit(0).SubUnit(0).ECID(dintLoop).ECSUL + " Where ECID=" + dintLoop.ToString();
if (DBAct.clsDBAct.funExecuteNonQuery(dstrSQL) == false)
{
pInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, "DB Update Fail(subLoadECID): ECID: " + dintLoop.ToString());
}
}
}
}
if (DBAct.clsDBAct.funOleDbTransaction() != null)
{
DBAct.clsDBAct.funCommitTransaction();
}
// 디비내용 업데이트는 한번만 하면 되지.. 이게 뭐니...
pInfo.DeleteTable("ECID");
dstrSQL = "SELECT * FROM tbECID order by ECID";
DataTable dt = DBAct.clsDBAct.funSelectQuery(dstrSQL);
pInfo.AddDataTable("ECID", dt);
pInfo.AddViewEvent(InfoAct.clsInfo.ViewEvent.ECIDUpdate);
if (pInfo.All.ECIDChangeBYWHO == "1" || pInfo.All.ECIDChangeBYWHO == "2")
{
//HOST나 OP에서 발생한것임
dstrECIDReport = pInfo.All.ECIDChangeFromHost;
pInfo.All.ECIDChangeFromHost = "";
//m_pInfo.All.ECIDChangeBYWHO = "";
}
else
{
pInfo.All.ECIDChangeBYWHO = "2"; //By Equipment
}
pInfo.subSendSF_Set(InfoAct.clsInfo.SFName.S6F11RelatedEquipmentParameterEvent, 102, dstrECIDReport); //마지막 인자는 ECID임
pInfo.All.ECIDChangeBYWHO = "";
//최종 수정된 날짜 Ini에 변경
FunINIMethod.subINIWriteValue("ETCInfo", "ECIDLastModified", DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"), pInfo.All.SystemINIFilePath);
}
catch (Exception ex)
{
pInfo.subLog_Set(InfoAct.clsInfo.LogType.CIM, ex.ToString());
if (!DBAct.clsDBAct.funIsNullTransaction())
{
DBAct.clsDBAct.funCommitTransaction();
}
}
}