FailureProcessingResult IFailuresPreprocessor.PreprocessFailures(FailuresAccessor failuresAccessor)
{
string transactionName = failuresAccessor.GetTransactionName();
IList <FailureMessageAccessor> po = failuresAccessor.GetFailureMessages();
if (po.Count == 0)
{
return(FailureProcessingResult.Continue);
}
if (transactionName.Equals("EXEMPLE"))
{
foreach (FailureMessageAccessor p1 in po)
{
if (p1.GetSeverity() == FailureSeverity.Error)
{
failuresAccessor.DeleteAllWarnings();
return(FailureProcessingResult.ProceedWithRollBack);
}
else
{
failuresAccessor.DeleteWarning(p1);
}
}
}
else
{
foreach (FailureMessageAccessor p1 in po)
{
failuresAccessor.DeleteAllWarnings();
}
}
return(FailureProcessingResult.Continue);
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor a)
{
// inside event handler, get all warnings
IList<FailureMessageAccessor> failures
= a.GetFailureMessages();
foreach (FailureMessageAccessor f in failures)
{
// check failure definition ids
// against ones to dismiss:
FailureDefinitionId id
= f.GetFailureDefinitionId();
a.DeleteAllWarnings();
//if (BuiltInFailures.CreationFailures.CannotCreateCornice
// == id)
//{
// a.DeleteWarning(f);
//}
}
return FailureProcessingResult.Continue;
}
FailureProcessingResult IFailuresPreprocessor.PreprocessFailures(FailuresAccessor failuresAccessor)
{
IList <FailureMessageAccessor> failList = failuresAccessor.GetFailureMessages();
if (_failureIdList.Count == 0)
{
failuresAccessor.DeleteAllWarnings();
if (deleteErrors)
{
foreach (FailureMessageAccessor accessor in failList)
{
if (accessor.GetSeverity() == FailureSeverity.Error)
{
var ids = accessor.GetFailingElementIds();
failuresAccessor.DeleteElements((IList <ElementId>)ids.GetEnumerator());
}
}
}
}
else
{
foreach (FailureMessageAccessor failure in failList)
{
FailureDefinitionId failId = failure.GetFailureDefinitionId();
if (_failureIdList.Exists(p => p == failId))
{
failuresAccessor.DeleteWarning(failure);
}
}
}
return(FailureProcessingResult.Continue);
}
/// <summary>
/// Preprocesses the failures.
/// </summary>
/// <param name="fa">The failure accessor.</param>
/// <returns></returns>
public FailureProcessingResult PreprocessFailures(FailuresAccessor fa)
{
fa.DeleteAllWarnings();
//if (fa.CanCommitPendingTransaction())
//{
// return FailureProcessingResult.ProceedWithCommit;
//}
return(FailureProcessingResult.Continue);
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor a)
{
// inside event handler, get all warnings
IList <FailureMessageAccessor> failures = a.GetFailureMessages();
foreach (FailureMessageAccessor f in failures)
{
a.DeleteAllWarnings();
}
return(FailureProcessingResult.Continue);
}
// TODO: gracefully save them somewhere, or do something about them - collect them and show them in the ui somehow?
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
//var fails = failuresAccessor.GetFailureMessages();
//foreach(var f in fails)
//{
//}
failuresAccessor.DeleteAllWarnings();
return(FailureProcessingResult.Continue);
}
/// <summary>
/// Log the failures coming from shape creation.
/// </summary>
/// <param name="failuresAccessor">The failure messages</param>
/// <returns>The result of processing the failures.</returns>
/// <remarks>This is in no way intended to be final code, as it doesn't actual handle failures,
/// just logs them.</remarks>
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
if (LoggingEnabled && m_LogFile != null)
{
int currentlyProcessedEntityId = (CurrentlyProcessedEntity != null) ? CurrentlyProcessedEntity.Id : 0;
IList <FailureMessageAccessor> failList = failuresAccessor.GetFailureMessages();
foreach (FailureMessageAccessor failure in failList)
{
if (currentlyProcessedEntityId != 0)
{
Write("#" + currentlyProcessedEntityId + ": ");
}
else
{
Write("GENERIC ");
}
switch (failure.GetSeverity())
{
case FailureSeverity.Warning:
Write("WARNING: ");
break;
default:
Write("ERROR: ");
break;
}
ICollection <ElementId> failureIds = failure.GetFailingElementIds();
int numFailureIds = (failureIds == null) ? 0 : failureIds.Count;
if (numFailureIds > 0)
{
Write("(Revit Element Id");
if (numFailureIds > 1)
{
Write("s");
}
Write(": ");
foreach (ElementId failureId in failureIds)
{
Write(failureId + " ");
}
Write("): ");
}
WriteLine(failure.GetDescriptionText());
}
// Only remove the warnings if logging is on.
failuresAccessor.DeleteAllWarnings();
}
return(FailureProcessingResult.Continue);
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
//IList<FailureMessageAccessor> failureMessages = failuresAccessor.GetFailureMessages();
//foreach (FailureMessageAccessor currenMessageAcessor in failureMessages)
//{
// failuresAccessor.ResolveFailure(currenMessageAcessor);
//}
failuresAccessor.DeleteAllWarnings();
return(FailureProcessingResult.Continue);
}
FailureProcessingResult IFailuresPreprocessor.PreprocessFailures(FailuresAccessor failuresAccessor)
{
if (!failuresAccessor.IsTransactionBeingCommitted())
{
return(FailureProcessingResult.Continue);
}
if (failuresAccessor.GetSeverity() >= FailureSeverity.DocumentCorruption)
{
return(FailureProcessingResult.ProceedWithRollBack);
}
if (failuresAccessor.GetSeverity() >= FailureSeverity.Error)
{
// Handled failures in order
{
var failureDefinitionIdsToFix = FailureDefinitionIdsToFix;
if (failureDefinitionIdsToFix != null)
{
var result = FixFailures(failuresAccessor, failureDefinitionIdsToFix);
if (result != FailureProcessingResult.Continue)
{
return(result);
}
}
}
// Unhandled failures in incomming order
{
var failureDefinitionIdsToFix = failuresAccessor.GetFailureMessages().GroupBy(x => x.GetFailureDefinitionId()).Select(x => x.Key);
var result = FixFailures(failuresAccessor, failureDefinitionIdsToFix);
if (result != FailureProcessingResult.Continue)
{
return(result);
}
}
}
if (failuresAccessor.GetSeverity() >= FailureSeverity.Warning)
{
// Unsolved failures or warnings
foreach (var error in failuresAccessor.GetFailureMessages().OrderBy(error => error.GetSeverity()))
{
AddRuntimeMessage(error, false);
}
failuresAccessor.DeleteAllWarnings();
}
return(FailureProcessingResult.Continue);
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
IList <FailureMessageAccessor> Failures = failuresAccessor.GetFailureMessages();
foreach (FailureMessageAccessor failure in Failures)
{
if (failure.GetSeverity().ToString().Contains("Warning"))
{
FailureDefinitionId Id = failure.GetFailureDefinitionId();
failuresAccessor.DeleteAllWarnings();
}
}
return(FailureProcessingResult.Continue);
}
private void Application_FailuresProcessing(object sender, FailuresProcessingEventArgs e)
{
FailuresAccessor failuresAccessor = e.GetFailuresAccessor();
failuresAccessor.DeleteAllWarnings();
IList <FailureMessageAccessor> fmas = failuresAccessor.GetFailureMessages();
var options = failuresAccessor.GetFailureHandlingOptions();
options.SetClearAfterRollback(true);
options.SetForcedModalHandling(false);
failuresAccessor.SetFailureHandlingOptions(options);
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
IList <FailureMessageAccessor> failList = new List <FailureMessageAccessor>();
var criticalFails = 0;
var failedElements = new List <ElementId>();
// Inside event handler, get all warnings
failList = failuresAccessor.GetFailureMessages();
foreach (FailureMessageAccessor failure in failList)
{
// check FailureDefinitionIds against ones that you want to dismiss,
//FailureDefinitionId failID = failure.GetFailureDefinitionId();
// prevent Revit from showing Unenclosed room warnings
//if (failID == BuiltInFailures.RoomFailures.RoomNotEnclosed)
//{
var t = failure.GetDescriptionText();
_converter.ConversionErrors.Add(new Exception(t));
var s = failure.GetSeverity();
if (s == FailureSeverity.Warning)
{
continue;
}
try
{
failuresAccessor.ResolveFailure(failure);
}
catch (Exception e)
{
// currently, the whole commit is rolled back. this should be investigated further at a later date
// to properly proceed with commit
failedElements.AddRange(failure.GetFailingElementIds());
_converter.ConversionErrors.Clear();
_converter.ConversionErrors.Add(new Exception(
"Objects failed to bake due to a fatal error!\n" +
"This is likely due to scaling issues - please ensure you've set the correct units on your objects or remove any invalid objects.\n\n" +
"Revit error: " + t));
// logging the error
var exception =
new Speckle.Core.Logging.SpeckleException("Revit commit failed: " + t, e,
level: Sentry.SentryLevel.Warning);
return(FailureProcessingResult.ProceedWithCommit);
}
}
failuresAccessor.DeleteAllWarnings();
return(FailureProcessingResult.Continue);
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
var severity = failuresAccessor.GetSeverity();
if (severity == FailureSeverity.Warning)
{
foreach (var warning in failuresAccessor.GetFailureMessages(FailureSeverity.Warning))
{
RhinoApp.WriteLine(warning.GetDescriptionText());
}
failuresAccessor.DeleteAllWarnings();
return(FailureProcessingResult.ProceedWithCommit);
}
return(FailureProcessingResult.Continue);
}
private void App_FailuresProcessing(object sender, Autodesk.Revit.DB.Events.FailuresProcessingEventArgs e)
{
FailuresAccessor fa = e.GetFailuresAccessor();
IList <FailureMessageAccessor> failList = new List <FailureMessageAccessor>();
failList = fa.GetFailureMessages(); // Inside event handler, get all warnings
foreach (FailureMessageAccessor failure in failList)
{
fa.DeleteAllWarnings();
/*
* // check FailureDefinitionIds against ones that you want to dismiss, FailureDefinitionId failID = failure.GetFailureDefinitionId();
* // prevent Revit from showing Unenclosed room warnings
* FailureDefinitionId failID = failure.GetFailureDefinitionId();
* if (failID == BuiltInFailures.WorksharingFailures.DuplicateNamesChanged)
* {
* fa.DeleteWarning(failure);
* }*/
}
}
private void FaliureProcessor(object sender, FailuresProcessingEventArgs e)
{
bool hasFailure = false;
FailuresAccessor fas = e.GetFailuresAccessor();
List <FailureMessageAccessor> fma = fas.GetFailureMessages().ToList();
List <ElementId> ElemntsToDelete = new List <ElementId>();
fas.DeleteAllWarnings();
foreach (FailureMessageAccessor fa in fma)
{
try
{
//use the following lines to delete the warning elements
List <ElementId> FailingElementIds = fa.GetFailingElementIds().ToList();
ElementId FailingElementId = FailingElementIds[0];
if (!ElemntsToDelete.Contains(FailingElementId))
{
ElemntsToDelete.Add(FailingElementId);
}
hasFailure = true;
fas.DeleteWarning(fa);
}
catch (Exception ex)
{
Console.WriteLine(ex.ToString());
}
}
if (ElemntsToDelete.Count > 0)
{
fas.DeleteElements(ElemntsToDelete);
}
//use the following line to disable the message supressor after the external command ends
//CachedUiApp.Application.FailuresProcessing -= FaliureProcessor;
if (hasFailure)
{
e.SetProcessingResult(FailureProcessingResult.ProceedWithCommit);
}
e.SetProcessingResult(FailureProcessingResult.Continue);
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
IList <FailureMessageAccessor> failList = new List <FailureMessageAccessor>();
// Inside event handler, get all warnings
failList = failuresAccessor.GetFailureMessages();
foreach (FailureMessageAccessor failure in failList)
{
// check FailureDefinitionIds against ones that you want to dismiss,
//FailureDefinitionId failID = failure.GetFailureDefinitionId();
// prevent Revit from showing Unenclosed room warnings
//if (failID == BuiltInFailures.RoomFailures.RoomNotEnclosed)
//{
var t = failure.GetDescriptionText();
var r = failure.GetDefaultResolutionCaption();
Globals.ConversionErrors.Add(new SpeckleError {
Message = t
});
}
failuresAccessor.DeleteAllWarnings();
return(FailureProcessingResult.Continue);
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
failuresAccessor.DeleteAllWarnings();
return(FailureProcessingResult.Continue);
}
/// <summary>
/// Log the failures coming from shape creation.
/// </summary>
/// <param name="failuresAccessor">The failure messages</param>
/// <returns>The result of processing the failures.</returns>
/// <remarks>This is in no way intended to be final code, as it doesn't actual handle failures,
/// just logs them.</remarks>
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
int currentlyProcessedEntityId = (CurrentlyProcessedEntity != null) ? CurrentlyProcessedEntity.Id : 0;
IList<FailureMessageAccessor> failList = failuresAccessor.GetFailureMessages();
foreach (FailureMessageAccessor failure in failList)
{
if (currentlyProcessedEntityId != 0)
Write("#" + currentlyProcessedEntityId + ": ");
else
Write("GENERIC ");
switch (failure.GetSeverity())
{
case FailureSeverity.Warning:
Write("WARNING: ");
break;
default:
Write("ERROR: ");
break;
}
ICollection<ElementId> failureIds = failure.GetFailingElementIds();
int numFailureIds = (failureIds == null) ? 0 : failureIds.Count;
if (numFailureIds > 0)
{
Write("(Revit Element Id");
if (numFailureIds > 1)
Write("s");
Write(": ");
foreach (ElementId failureId in failureIds)
Write(failureId + " ");
Write("): ");
}
WriteLine(failure.GetDescriptionText());
}
// Only remove the warnings if logging is on.
failuresAccessor.DeleteAllWarnings();
return FailureProcessingResult.Continue;
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor accesoALosFallosDetectados)
{
accesoALosFallosDetectados.DeleteAllWarnings();
return(FailureProcessingResult.Continue);
}
public FailureProcessingResult PreprocessFailures(
FailuresAccessor a)
{
// inside event handler, get all warnings
//IList<FailureMessageAccessor> failures
// = a.GetFailureMessages();
a.DeleteAllWarnings();
/*foreach (FailureMessageAccessor f in failures)
{
// check failure definition ids
// against ones to dismiss:
FailureDefinitionId id
= f.GetFailureDefinitionId();
if (BuiltInFailures.RoomFailures.RoomNotEnclosed
== id)
{
a.DeleteWarning(f);
}
}*/
IList<FailureMessageAccessor> failures = a.GetFailureMessages();
if (failures.Count > 0)
return FailureProcessingResult.ProceedWithRollBack;
else
return FailureProcessingResult.Continue;
}
