/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public virtual Result Execute(ExternalCommandData commandData
, ref string message, ElementSet elements)
{
try
{
Document doc = commandData.Application.ActiveUIDocument.Document;
// get the user selection
UIDocument uidoc = commandData.Application.ActiveUIDocument;
ICollection <ElementId> collection = uidoc.Selection.GetElementIds();
if (collection.Count > 0)
{
// DesignToFabrication needs an ISet<ElementId>
ISet <ElementId> selIds = new HashSet <ElementId>();
foreach (ElementId id in collection)
{
selIds.Add(id);
}
using (Transaction tr = new Transaction(doc, "Convert To Fabrication Parts"))
{
tr.Start();
FabricationConfiguration config = FabricationConfiguration.GetFabricationConfiguration(doc);
// get all loaded fabrication services and attempt to convert the design elements
// to the first loaded service
IList <FabricationService> allLoadedServices = config.GetAllLoadedServices();
DesignToFabricationConverter converter = new DesignToFabricationConverter(doc);
DesignToFabricationConverterResult result = converter.Convert(selIds, allLoadedServices[0].ServiceId);
if (result != DesignToFabricationConverterResult.Success)
{
message = "There was a problem with the conversion.";
return(Result.Failed);
}
doc.Regenerate();
tr.Commit();
}
return(Result.Succeeded);
}
else
{
// inform user they need to select at least one element
message = "Please select at least one element.";
}
return(Result.Failed);
}
catch (Exception ex)
{
message = ex.Message;
return(Result.Failed);
}
}
public List <QLFabricationService> GetFabServices(IResolveFieldContext context, string[] nameFilter = null)
{
Document _doc = ResolverEntry.Doc;
var stuff = ResolverEntry.aRevitTask.Run <List <QLFabricationService> >(app =>
{
var fabricationConfiguration = FabricationConfiguration.GetFabricationConfiguration(_doc);
var objectList = fabricationConfiguration.GetAllServices();
var nameFilterStrings = nameFilter != null ? nameFilter.ToList() : new List <string>();
//var qlFabricationPartsField = GraphQlHelpers.GetFieldFromContext(context, "qlFabricationParts");
var returnObject = new ConcurrentBag <QLFabricationService>();
//Parallel.ForEach(stringList, aFamilyCategoryName =>
foreach (var aFabricationService in objectList)
{
if (nameFilterStrings.Count == 0 || nameFilterStrings.Contains(aFabricationService.Name))
{
var qlFabricationService = new QLFabricationServiceResolve(aFabricationService, context);
returnObject.Add(qlFabricationService);
}
}
return(returnObject.OrderBy(x => x.name).ToList());
}).Result;
return(stuff);
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public virtual Result Execute(ExternalCommandData commandData
, ref string message, ElementSet elements)
{
try
{
Document doc = commandData.Application.ActiveUIDocument.Document;
using (Transaction tr = new Transaction(doc, "Set button and group exclusions"))
{
tr.Start();
FabricationConfiguration config = FabricationConfiguration.GetFabricationConfiguration(doc);
if (config == null)
{
message = "No fabrication configuration loaded.";
return(Result.Failed);
}
// get all loaded fabrication services
IList <FabricationService> allLoadedServices = config.GetAllLoadedServices();
// get the "ADSK - HVAC:Supply Air" service
string serviceName = "ADSK - HVAC: Supply Air";
FabricationService selectedService = allLoadedServices.FirstOrDefault(x => x.Name == serviceName);
if (selectedService == null)
{
message = $"Could not find fabrication service {serviceName}";
return(Result.Failed);
}
string rectangularGroupName = "Rectangular";
string roundGroupName = "Round Bought Out";
string excludeButtonName = "Square Bend";
int rectangularGroupIndex = -1;
int roundGroupIndex = -1;
// find Rectangular and Round groups in service
for (int i = 0; i < selectedService.GroupCount; i++)
{
if (selectedService.GetGroupName(i) == rectangularGroupName)
{
rectangularGroupIndex = i;
}
if (selectedService.GetGroupName(i) == roundGroupName)
{
roundGroupIndex = i;
}
if (rectangularGroupIndex > -1 && roundGroupIndex > -1)
{
break;
}
}
if (rectangularGroupIndex > -1)
{
// exclude square bend in Rectangular group
for (int i = 0; i < selectedService.GetButtonCount(rectangularGroupIndex); i++)
{
if (selectedService.GetButton(rectangularGroupIndex, i).Name == excludeButtonName)
{
selectedService.OverrideServiceButtonExclusion(rectangularGroupIndex, i, true);
break;
}
}
}
else
{
message = $"Unable to locate {excludeButtonName} button to exclude.";
return(Result.Failed);
}
// exclude entire Round Bought Out service group
if (roundGroupIndex > -1)
{
selectedService.SetServiceGroupExclusions(new List <int>()
{
roundGroupIndex
});
}
else
{
message = $"Unable to locate {roundGroupName} service group to exclude.";
return(Result.Failed);
}
tr.Commit();
TaskDialog td = new TaskDialog("Button and Group Exclsuions")
{
MainIcon = TaskDialogIcon.TaskDialogIconInformation,
TitleAutoPrefix = false,
MainInstruction = "Operation Successful",
MainContent = $"Excluded {excludeButtonName} button from {serviceName} {rectangularGroupName} Group {Environment.NewLine}"
+ $"Excluded {roundGroupName} Group from {serviceName}"
};
td.Show();
}
return(Result.Succeeded);
}
catch (Exception ex)
{
message = ex.Message;
return(Result.Failed);
}
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public virtual Result Execute(ExternalCommandData commandData
, ref string message, ElementSet elements)
{
try
{
var uiDoc = commandData.Application.ActiveUIDocument;
var doc = uiDoc.Document;
FilteredElementCollector cl = new FilteredElementCollector(doc);
cl.OfClass(typeof(Level));
IList <Element> levels = cl.ToElements();
Level levelOne = null;
foreach (Level level in levels)
{
if (level != null && level.Name.Equals("Level 1"))
{
levelOne = level;
break;
}
}
if (levelOne == null)
{
return(Result.Failed);
}
using (var config = FabricationConfiguration.GetFabricationConfiguration(doc))
{
if (config == null)
{
message = "No fabrication configuration in use";
return(Result.Failed);
}
using (var configInfo = config.GetFabricationConfigurationInfo())
{
using (var source = FabricationConfigurationInfo.FindSourceFabricationConfiguration(configInfo))
{
if (source == null)
{
message = "Source fabrication configuration not found";
return(Result.Failed);
}
using (var trans = new Autodesk.Revit.DB.Transaction(doc, "Load And Place Next Item File"))
{
trans.Start();
// reload the configuration
config.ReloadConfiguration();
// get the item folders
var itemFolders = config.GetItemFolders();
// get the next unloaded item file from the item folders structure
var nextFile = GetNextUnloadedItemFile(itemFolders);
if (nextFile == null)
{
message = "Could not locate the next unloaded item file";
return(Result.Failed);
}
var itemFilesToLoad = new List <FabricationItemFile>();
itemFilesToLoad.Add(nextFile);
// load the item file into the config
var failedItems = config.LoadItemFiles(itemFilesToLoad);
if (failedItems != null && failedItems.Count > 0)
{
message = "Could not load the item file: " + nextFile.Identifier;
return(Result.Failed);
}
// create a part from the item file
using (var part = FabricationPart.Create(doc, nextFile, levelOne.Id))
{
doc.Regenerate();
var selectedElements = new List <ElementId>()
{
part.Id
};
uiDoc.Selection.SetElementIds(selectedElements);
uiDoc.ShowElements(selectedElements);
trans.Commit();
}
}
}
}
}
return(Result.Succeeded);
}
catch (Exception ex)
{
message = ex.Message;
return(Result.Failed);
}
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public virtual Result Execute(ExternalCommandData commandData
, ref string message, ElementSet elements)
{
try
{
var uiDoc = commandData.Application.ActiveUIDocument;
var doc = uiDoc.Document;
using (var config = FabricationConfiguration.GetFabricationConfiguration(doc))
{
if (config == null)
{
message = "No fabrication configuration in use";
return(Result.Failed);
}
using (var trans = new Transaction(doc, "Unload unused item files"))
{
trans.Start();
config.ReloadConfiguration();
var loadedFiles = config.GetAllLoadedItemFiles();
var unusedFiles = loadedFiles.Where(x => x.IsUsed == false).ToList();
if (unusedFiles.Count == 0)
{
message = "No unuseed item files found";
return(Result.Failed);
}
if (config.CanUnloadItemFiles(unusedFiles) == false)
{
message = "Cannot unload item files";
return(Result.Failed);
}
config.UnloadItemFiles(unusedFiles);
trans.Commit();
var builder = new StringBuilder();
unusedFiles.ForEach(x => builder.AppendLine(System.IO.Path.GetFileNameWithoutExtension(x.Identifier)));
TaskDialog td = new TaskDialog("Unload Unused Item Files")
{
MainIcon = TaskDialogIcon.TaskDialogIconInformation,
TitleAutoPrefix = false,
MainInstruction = "The following item files were unloaded:",
MainContent = builder.ToString()
};
td.Show();
}
}
return(Result.Succeeded);
}
catch (Exception ex)
{
message = ex.Message;
return(Result.Failed);
}
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public virtual Result Execute(ExternalCommandData commandData
, ref string message, ElementSet elements)
{
Document doc = commandData.Application.ActiveUIDocument.Document;
UIDocument uidoc = commandData.Application.ActiveUIDocument;
FabricationPart fabPart = null;
FabricationConfiguration config = null;
try
{
// check for a load fabrication config
config = FabricationConfiguration.GetFabricationConfiguration(doc);
if (config == null)
{
message = "No fabrication configuration loaded.";
return(Result.Failed);
}
// pick a fabrication part
Reference refObj = uidoc.Selection.PickObject(ObjectType.Element, "Pick a fabrication part to start.");
fabPart = doc.GetElement(refObj) as FabricationPart;
}
catch (Autodesk.Revit.Exceptions.OperationCanceledException)
{
return(Result.Cancelled);
}
if (fabPart == null)
{
message = "The selected element is not a fabrication part.";
return(Result.Failed);
}
else
{
// get ancillary data from selected part and report to user
IList <FabricationAncillaryUsage> ancillaries = fabPart.GetPartAncillaryUsage();
List <string> ancillaryDescriptions = new List <string>();
// create list of ancillary descriptions using the Ancillary UseageType and Name
foreach (var ancillaryUsage in ancillaries)
{
FabricationAncillaryType ancilType = ancillaryUsage.Type;
FabricationAncillaryUsageType usageType = ancillaryUsage.UsageType;
ancillaryDescriptions.Add($"{ancilType.ToString()}: {usageType.ToString()} - "
+ $"{config.GetAncillaryName(ancillaryUsage.AncillaryId)}");
}
string results = string.Empty;
// group and quantify
if (ancillaryDescriptions.Count > 0)
{
ancillaryDescriptions.Sort();
StringBuilder resultsBuilder = new StringBuilder();
string currentAncillary = string.Empty;
foreach (var ancillaryName in ancillaryDescriptions)
{
if (ancillaryName != currentAncillary)
{
resultsBuilder.AppendLine($"{ancillaryName} x {ancillaryDescriptions.Count(x => x == ancillaryName)}");
currentAncillary = ancillaryName;
}
}
results = resultsBuilder.ToString();
}
TaskDialog td = new TaskDialog("Ancillaries")
{
MainIcon = TaskDialogIcon.TaskDialogIconInformation,
TitleAutoPrefix = false,
MainInstruction = ancillaryDescriptions.Count > 0 ?
$"{ancillaryDescriptions.Count} ancillaries found on selected part"
: $"No ancillaries found on selected part",
MainContent = results
};
td.Show();
}
return(Result.Succeeded);
}
private void extract_mep_data(Document rvtDoc)
{
try
{
FabricationConfiguration config = FabricationConfiguration.GetFabricationConfiguration(rvtDoc);
if (config == null)
{
LogTrace("GetFabricationConfiguration failed");
return;
}
GetFabricationConnectors(config);
FilteredElementCollector m_Collector = new FilteredElementCollector(rvtDoc);
m_Collector.OfClass(typeof(FabricationPart));
IList <Element> fps = m_Collector.ToElements();
string outputFullPath = System.IO.Directory.GetCurrentDirectory() + "\\" + OUTPUT_FILE;
FileStream fs = new FileStream(outputFullPath, System.IO.FileMode.Create, System.IO.FileAccess.Write);
StreamWriter sw = new StreamWriter(fs, System.Text.Encoding.UTF8);
foreach (Element el in fps)
{
FabricationPart fp = el as FabricationPart;
LogTrace("Reading data of one FabricationPart: " + fp.Name);
sw.WriteLine("Name: " + fp.Name);
foreach (Parameter para in el.Parameters)
{
sw.WriteLine(" " + GetParameterInformation(para, rvtDoc));
}
sw.WriteLine(" ProductName: " + fp.ProductName);
sw.WriteLine(" ServiceName: " + fp.ServiceName);
sw.WriteLine(" Service Type: " + config.GetServiceTypeName(fp.ServiceType));
sw.WriteLine(" SpoolName: " + fp.SpoolName);
sw.WriteLine(" Alias: " + fp.Alias);
sw.WriteLine(" CID: " + fp.ItemCustomId.ToString());
sw.WriteLine(" Domain Type: " + fp.DomainType.ToString());
if (fp.IsAHanger())
{
string rodKitName = " None";
var rodKit = fp.HangerRodKit;
if (rodKit > 0)
{
rodKitName = config.GetAncillaryGroupName(fp.HangerRodKit) + ": " +
config.GetAncillaryName(fp.HangerRodKit);
}
sw.WriteLine(" Hanger Rod Kit: " + rodKitName);
}
var insSpec = config.GetInsulationSpecificationGroup(fp.InsulationSpecification)
+ ": " + config.GetInsulationSpecificationName(fp.InsulationSpecification);
sw.WriteLine(" Insulation Specification: " + insSpec);
sw.WriteLine(" Has No Connections: " + fp.HasNoConnections().ToString());
sw.WriteLine(" Item Number: " + fp.ItemNumber);
var material = config.GetMaterialGroup(fp.Material) + ": " + config.GetMaterialName(fp.Material);
sw.WriteLine(" Material: " + material);
sw.WriteLine(" Part Guid: " + fp.PartGuid.ToString());
sw.WriteLine(" Part Status: " + config.GetPartStatusDescription(fp.PartStatus));
sw.WriteLine(" Product Code: " + fp.ProductCode);
var spec = config.GetSpecificationGroup(fp.Specification) + ": " +
config.GetSpecificationName(fp.Specification);
sw.WriteLine(" Specification: " + spec);
sw.WriteLine(" Dimensions from Fabrication Dimension Definition:");
foreach (FabricationDimensionDefinition dmdef in fp.GetDimensions())
{
sw.WriteLine(" " + dmdef.Name + ":" + fp.GetDimensionValue(dmdef).ToString());
}
int index = 1;
sw.WriteLine(" Connectors:");
foreach (Connector con in fp.ConnectorManager.Connectors)
{
sw.WriteLine(" C" + index.ToString());
FabricationConnectorInfo fci = con.GetFabricationConnectorInfo();
sw.WriteLine(" Connector Info:" + m_connGroups[fci.BodyConnectorId] +
" " + m_connNames[fci.BodyConnectorId]);
sw.WriteLine(" IsBodyConnectorLocked:" + fci.IsBodyConnectorLocked.ToString());
sw.WriteLine(" Shape:" + con.Shape.ToString());
try
{ sw.WriteLine(" Radius:" + con.Radius.ToString()); }
catch (Exception ex) { }
try
{ sw.WriteLine(" PressureDrop:" + con.PressureDrop.ToString()); }
catch (Exception ex) { }
try
{ sw.WriteLine(" Width:" + con.Width.ToString()); }
catch (Exception ex) { }
try
{ sw.WriteLine(" Height:" + con.Height.ToString()); }
catch (Exception ex) { }
try
{ sw.WriteLine(" PipeSystemType:" + con.PipeSystemType.ToString()); }
catch (Exception ex) { }
try
{ sw.WriteLine(" VelocityPressure:" + con.VelocityPressure.ToString()); }
catch (Exception ex) { }
try
{ sw.WriteLine(" DuctSystemType:" + con.DuctSystemType.ToString()); }
catch (Exception ex) { }
index++;
}
}
LogTrace("Saving file...");
sw.Close();
fs.Close();
}
catch (Exception ex)
{
LogTrace("Unexpected Exception..." + ex.ToString());
}
}
/// <summary>
/// Report the custom data.
/// </summary>
/// <param name="doc"></param>
/// <param name="uiDoc"></param>
/// <param name="setNewValues"></param>
/// <param name="message"></param>
/// <returns></returns>
public static Result ReportCustomData(Document doc, UIDocument uiDoc, bool setNewValues, ref string message)
{
FabricationPart fabPart = null;
FabricationConfiguration config = null;
try
{
// check for a load fabrication config
config = FabricationConfiguration.GetFabricationConfiguration(doc);
if (config == null)
{
message = "No fabrication configuration loaded.";
return(Result.Failed);
}
// pick a fabrication part
Reference refObj = uiDoc.Selection.PickObject(ObjectType.Element, "Pick a fabrication part to start.");
fabPart = doc.GetElement(refObj) as FabricationPart;
}
catch (Autodesk.Revit.Exceptions.OperationCanceledException)
{
return(Result.Cancelled);
}
if (fabPart == null)
{
message = "The selected element is not a fabrication part.";
return(Result.Failed);
}
else
{
// get custom data from loaded fabrication config
IList <int> customDataIds = config.GetAllPartCustomData();
int customDataCount = customDataIds.Count;
string results = string.Empty;
// report custom data info
if (customDataCount > 0)
{
StringBuilder resultsBuilder = new StringBuilder();
resultsBuilder.AppendLine($"Fabrication config contains {customDataCount} custom data entries {Environment.NewLine}");
foreach (var customDataId in customDataIds)
{
FabricationCustomDataType customDataType = config.GetPartCustomDataType(customDataId);
string customDataName = config.GetPartCustomDataName(customDataId);
resultsBuilder.AppendLine($"Type: {customDataType.ToString()} Name: {customDataName}");
// check custom data exists on selected part
if (fabPart.HasCustomData(customDataId))
{
string fabPartCurrentValue = string.Empty;
string fabPartNewValue = string.Empty;
switch (customDataType)
{
case FabricationCustomDataType.Text:
fabPartCurrentValue = $"\"{fabPart.GetPartCustomDataText(customDataId)}\"";
if (setNewValues)
{
string installDateTime = DateTime.Now.ToString("yyyy-MM-dd HH:mm");
fabPart.SetPartCustomDataText(customDataId, installDateTime);
fabPartNewValue = installDateTime;
}
break;
case FabricationCustomDataType.Integer:
fabPartCurrentValue = fabPart.GetPartCustomDataInteger(customDataId).ToString();
if (setNewValues)
{
int installHours = new Random().Next(1, 10);
fabPart.SetPartCustomDataInteger(customDataId, installHours);
fabPartNewValue = installHours.ToString();
}
break;
case FabricationCustomDataType.Real:
fabPartCurrentValue = $"{fabPart.GetPartCustomDataReal(customDataId):0.##}";
if (setNewValues)
{
double installCost = new Random().NextDouble() * new Random().Next(100, 1000);
fabPart.SetPartCustomDataReal(customDataId, installCost);
fabPartNewValue = $"{installCost:0.##}";
}
break;
}
resultsBuilder.AppendLine("Current custom data entry value = "
+ $"{fabPartCurrentValue} {Environment.NewLine}");
if (setNewValues)
{
resultsBuilder.AppendLine("New custom data entry value = "
+ $"{fabPartNewValue} {Environment.NewLine}");
}
}
else
{
resultsBuilder.AppendLine($"Custom data entry is not set on the part {Environment.NewLine}");
}
}
results = resultsBuilder.ToString();
}
TaskDialog td = new TaskDialog("Custom Data")
{
MainIcon = TaskDialogIcon.TaskDialogIconInformation,
TitleAutoPrefix = false,
MainInstruction = $"{customDataCount} custom data entries found in the loaded fabrication config",
MainContent = results
};
td.Show();
}
return(Result.Succeeded);
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public virtual Result Execute(ExternalCommandData commandData
, ref string message, ElementSet elements)
{
try
{
// check user selection
var uiDoc = commandData.Application.ActiveUIDocument;
var doc = uiDoc.Document;
Reference refObj = uiDoc.Selection.PickObject(ObjectType.Element, "Pick a fabrication part to start.");
var part = doc.GetElement(refObj) as FabricationPart;
if (part == null)
{
message = "The selected element is not a fabrication part.";
return(Result.Failed);
}
var config = FabricationConfiguration.GetFabricationConfiguration(doc);
if (config == null)
{
message = "no valid fabrication configuration";
return(Result.Failed);
}
var builder = new StringBuilder();
// alias
builder.AppendLine("Alias: " + part.Alias);
// cid
builder.AppendLine("CID: " + part.ItemCustomId.ToString());
// domain type
builder.AppendLine("Domain Type: " + part.DomainType.ToString());
// hanger rod kit
if (part.IsAHanger())
{
string rodKitName = "None";
var rodKit = part.HangerRodKit;
if (rodKit > 0)
{
rodKitName = config.GetAncillaryGroupName(part.HangerRodKit) + ": " + config.GetAncillaryName(part.HangerRodKit);
}
builder.AppendLine("Hanger Rod Kit: " + rodKitName);
}
// insulation specification
var insSpec = config.GetInsulationSpecificationGroup(part.InsulationSpecification)
+ ": " + config.GetInsulationSpecificationName(part.InsulationSpecification);
builder.AppendLine("Insulation Specification: " + insSpec);
// has no connections
builder.AppendLine("Has No Connections: " + part.HasNoConnections().ToString());
// item number
builder.AppendLine("Item Number: " + part.ItemNumber);
// material
var material = config.GetMaterialGroup(part.Material) + ": " + config.GetMaterialName(part.Material);
builder.AppendLine("Material: " + material);
// part guid
builder.AppendLine("Part Guid: " + part.PartGuid.ToString());
// part status
builder.AppendLine("Part Status: " + config.GetPartStatusDescription(part.PartStatus));
// product code
builder.AppendLine("Product Code: " + part.ProductCode);
// service
builder.AppendLine("Service Name: " + part.ServiceName);
// get the service type name
builder.AppendLine("Service Type: " + config.GetServiceTypeName(part.ServiceType));
// specification
var spec = config.GetSpecificationGroup(part.Specification) + ": " + config.GetSpecificationName(part.Specification);
builder.AppendLine("Specification: " + spec);
// centerline length
builder.AppendLine("Centerline Length: " + GetStringFromNumber(doc, part.CenterlineLength, UnitType.UT_Length));
TaskDialog.Show("Fabrication Part [" + part.Id.IntegerValue + "]", builder.ToString());
return(Result.Succeeded);
}
catch (Exception ex)
{
message = ex.Message;
return(Result.Failed);
}
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public virtual Result Execute(ExternalCommandData commandData
, ref string message, ElementSet elements)
{
try
{
Document doc = commandData.Application.ActiveUIDocument.Document;
// get the user selection
UIDocument uidoc = commandData.Application.ActiveUIDocument;
ICollection <ElementId> collection = uidoc.Selection.GetElementIds();
if (collection.Count > 0)
{
// DesignToFabrication needs an ISet<ElementId>
ISet <ElementId> selIds = new HashSet <ElementId>();
foreach (ElementId id in collection)
{
selIds.Add(id);
}
// Set the in-line element type identiers to be swapped during the conversion replacing the family with a similar fabrication part
IDictionary <ElementId, ElementId> convertInLineIds = new Dictionary <ElementId, ElementId>();
// Get all family symbols
FilteredElementCollector familyFinder = new FilteredElementCollector(doc);
var families = familyFinder.OfClass(typeof(FamilySymbol)).ToElements().ToList();
// Get the family symbol for the damper we are going to convert
String fsName = "Fire Damper - Rectangular - Simple";
// The found family symbol
FamilySymbol fsDamper = null;
foreach (FamilySymbol family in families)
{
if (family.FamilyName == fsName)
{
fsDamper = family;
break;
}
}
// If the damper was found try to find the matching fabrication part type
if (fsDamper != null)
{
// Get the element type identifier for the family symbol
var elemFamSymId = fsDamper.Id;
// Get all fabrication part types
FilteredElementCollector fabPartTypeFinder = new FilteredElementCollector(doc);
var fabPartTypes = fabPartTypeFinder.OfClass(typeof(FabricationPartType)).ToElements().ToList();
// Get the fabrication part type for the damper we are going to convert to
String fptName = "Rect FD - Flange";
// The found fabrication part type
FabricationPartType fptDamper = null;
foreach (FabricationPartType partType in fabPartTypes)
{
if (partType.FamilyName == fptName)
{
fptDamper = partType;
break;
}
}
// The damper was found create the mapping in between the family symbol and the matching fabrication part type
if (fptDamper != null)
{
// Get the element type identifier for the fabricaion part type
var elemFabPartTypeId = fptDamper.Id;
// Create the mapping for the family to the fabrication part
convertInLineIds.Add(elemFamSymId, elemFabPartTypeId);
}
}
using (Transaction tr = new Transaction(doc, "Convert To Fabrication Parts"))
{
tr.Start();
FabricationConfiguration config = FabricationConfiguration.GetFabricationConfiguration(doc);
// get all loaded fabrication services and attempt to convert the design elements
// to the first loaded service
IList <FabricationService> allLoadedServices = config.GetAllLoadedServices();
DesignToFabricationConverter converter = new DesignToFabricationConverter(doc);
// If there is a mapping defined attempt to add it to the converter
if (convertInLineIds.Count() > 0)
{
// Set the mappings
DesignToFabricationMappingResult mappingResult = converter.SetMapForFamilySymbolToFabricationPartType(convertInLineIds);
if (mappingResult != DesignToFabricationMappingResult.Success)
{
if (mappingResult != DesignToFabricationMappingResult.Undefined)
{
message = "There was a problem with the conversion. The map contained no entries.";
}
else if (mappingResult != DesignToFabricationMappingResult.InvalidFamilySymbol)
{
message = "There was a problem with the conversion. There was an invalid Family symbol identifier or an identifier that did not exist in the mappings.";
}
else if (mappingResult != DesignToFabricationMappingResult.InvalidFabricationPartType)
{
message = "There was a problem with the conversion. There was an invalid Fabrication part type identifier or an identifier that did not exist in the mappings.";
}
else if (mappingResult != DesignToFabricationMappingResult.UnsupportedFamilySymbol)
{
message = "There was a problem with the conversion. Unsupported Family symbol it is expected to be either valve, strainer, damper, smoke detector, end cap, or other in line component.";
}
else if (mappingResult != DesignToFabricationMappingResult.UnsupportedFabricationPartType)
{
message = "There was a problem with the conversion. Unsupported Fabrication part type. It is expected to be either valve, strainer, damper, smoke detector, end cap, or other in line component.";
}
return(Result.Failed);
}
}
DesignToFabricationConverterResult result = converter.Convert(selIds, allLoadedServices[0].ServiceId);
if (result != DesignToFabricationConverterResult.Success)
{
message = "There was a problem with the conversion.";
return(Result.Failed);
}
doc.Regenerate();
tr.Commit();
}
return(Result.Succeeded);
}
else
{
// inform user they need to select at least one element
message = "Please select at least one element.";
}
return(Result.Failed);
}
catch (Exception ex)
{
message = ex.Message;
return(Result.Failed);
}
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public virtual Result Execute(ExternalCommandData commandData
, ref string message, ElementSet elements)
{
try
{
Document doc = commandData.Application.ActiveUIDocument.Document;
// get the user selection
UIDocument uidoc = commandData.Application.ActiveUIDocument;
ICollection <ElementId> collection = uidoc.Selection.GetElementIds();
if (collection.Count > 0)
{
// FabricationNetworkChangeService needs an ISet<ElementId>
ISet <ElementId> selIds = new HashSet <ElementId>();
foreach (ElementId id in collection)
{
selIds.Add(id);
}
using (Transaction tr = new Transaction(doc, "Appply Change Service and Size of Fabrication Parts"))
{
tr.Start();
FabricationConfiguration config = FabricationConfiguration.GetFabricationConfiguration(doc);
// Get all loaded fabrication services
IList <FabricationService> allLoadedServices = config.GetAllLoadedServices();
FabricationNetworkChangeService applychange = new FabricationNetworkChangeService(doc);
// Set the selection of element identifiers to be changed
applychange.SetSelection(selIds);
// Set the service to the second service in the list (ductwork exhaust service)
applychange.SetServiceId(allLoadedServices[1].ServiceId);
// Set the group to the second in the list (round)
applychange.SetGroupId(1);
// Get the sizes of all the straights that was in the selection of elements that was added to FabricationNetworkChangeService
ISet <Autodesk.Revit.DB.Fabrication.FabricationPartSizeMap> sizeMappings = applychange.GetMapOfAllSizesForStraights();
foreach (Autodesk.Revit.DB.Fabrication.FabricationPartSizeMap sizemapping in sizeMappings)
{
if (sizemapping != null)
{
// Testing round so ignoring the depth and adding 6" to the current size so all straights will be updated to a new size
var widthDia = sizemapping.WidthDiameter + 0.5;
sizemapping.MappedWidthDiameter = widthDia;
}
}
applychange.SetMapOfSizesForStraights(sizeMappings);
// Get the in-line element type identiers
var inlineRevIds = new HashSet <Autodesk.Revit.DB.ElementId>();
ISet <Autodesk.Revit.DB.ElementId> inlineIds = applychange.GetInLinePartTypes();
for (var ii = inlineIds.Count() - 1; ii > -1; ii--)
{
var elemId = inlineIds.ElementAt(ii);
if (elemId != null)
{
inlineRevIds.Add(elemId);
}
}
// Set the in-line element type identiers by swapping them out by reversing the order to keep it simple but still exercise the code
IDictionary <ElementId, ElementId> swapinlineIds = new Dictionary <ElementId, ElementId>();
for (var ii = inlineIds.Count() - 1; ii > -1; ii--)
{
var elemId = inlineIds.ElementAt(ii);
var elemIdother = inlineRevIds.ElementAt(ii);
if ((elemId != null) && (elemId != null))
{
swapinlineIds.Add(elemId, elemIdother);
}
}
applychange.SetMapOfInLinePartTypes(swapinlineIds);
// Apply the changes
FabricationNetworkChangeServiceResult result = applychange.ApplyChange();
if (result != FabricationNetworkChangeServiceResult.Success)
{
message = "There was a problem with the apply change.";
return(Result.Failed);
}
doc.Regenerate();
tr.Commit();
}
return(Result.Succeeded);
}
else
{
// inform user they need to select at least one element
message = "Please select at least one element.";
}
return(Result.Failed);
}
catch (Exception ex)
{
message = ex.Message;
return(Result.Failed);
}
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public virtual Result Execute(ExternalCommandData commandData
, ref string message, ElementSet elements)
{
try
{
Document doc = commandData.Application.ActiveUIDocument.Document;
// get the user selection
UIDocument uidoc = commandData.Application.ActiveUIDocument;
ICollection <ElementId> collection = uidoc.Selection.GetElementIds();
if (collection.Count > 0)
{
// FabricationNetworkChangeService needs an ISet<ElementId>
ISet <ElementId> selIds = new HashSet <ElementId>();
foreach (ElementId id in collection)
{
selIds.Add(id);
}
using (Transaction tr = new Transaction(doc, "Change Size of Fabrication Parts"))
{
tr.Start();
FabricationConfiguration config = FabricationConfiguration.GetFabricationConfiguration(doc);
// Get all loaded fabrication services
IList <FabricationService> allLoadedServices = config.GetAllLoadedServices();
// Create a map of sizes to swap the current sizes to a new size
var sizeMappings = new HashSet <Autodesk.Revit.DB.Fabrication.FabricationPartSizeMap>();
var mapping = new Autodesk.Revit.DB.Fabrication.FabricationPartSizeMap("12x12", 1.0, 1.0, false, ConnectorProfileType.Rectangular, allLoadedServices[0].ServiceId, 0);
mapping.MappedWidthDiameter = 1.5;
mapping.MappedDepth = 1.5;
sizeMappings.Add(mapping);
var mapping1 = new Autodesk.Revit.DB.Fabrication.FabricationPartSizeMap("18x18", 1.5, 1.5, false, ConnectorProfileType.Rectangular, allLoadedServices[0].ServiceId, 0);
mapping1.MappedWidthDiameter = 2.0;
mapping1.MappedDepth = 2.0;
sizeMappings.Add(mapping1);
FabricationNetworkChangeService changesize = new FabricationNetworkChangeService(doc);
// Change the size of the fabrication parts in the selection to the new sizes
FabricationNetworkChangeServiceResult result = changesize.ChangeSize(selIds, sizeMappings);
if (result != FabricationNetworkChangeServiceResult.Success)
{
// Get the collection of element identifiers for parts that had errors posted against them
ICollection <ElementId> errorIds = changesize.GetElementsThatFailed();
if (errorIds.Count > 0)
{
message = "There was a problem with the change size.";
return(Result.Failed);
}
}
doc.Regenerate();
tr.Commit();
}
return(Result.Succeeded);
}
else
{
// inform user they need to select at least one element
message = "Please select at least one element.";
}
return(Result.Failed);
}
catch (Exception ex)
{
message = ex.Message;
return(Result.Failed);
}
}