/// <summary>
/// A special case function that can export a Rebar element as an IfcBuildingElementProxy for view-specific exports where the exact geometry of the rebar matters.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="rebarElement">The rebar element to be exported.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
/// <param name="cannotExportRebar">True if we tried to create an IFC entity but failed.</param>
/// <returns>True if the rebar was exported here, false otherwise.</returns>
/// <remarks>This functionality may be obsoleted in the future.</remarks>
private static IFCAnyHandle ExportRebarAsProxyElementInView(ExporterIFC exporterIFC, Element rebarElement, ProductWrapper productWrapper, out bool cannotExportRebar)
{
IFCAnyHandle rebarEntity = null;
cannotExportRebar = false;
if (rebarElement is Rebar && ExporterCacheManager.ExportOptionsCache.FilterViewForExport != null)
{
// The only options handled here is IfcBuildingElementProxy.
// Not Exported is handled previously, and ReinforcingBar vs Mesh will be handled later.
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, rebarElement, out ifcEnumType);
if (exportType.ExportInstance == IFCEntityType.IfcBuildingElementProxy ||
exportType.ExportType == IFCEntityType.IfcBuildingElementProxyType)
{
Rebar rebar = rebarElement as Rebar;
GeometryElement rebarGeometry = rebar.GetFullGeometryForView(ExporterCacheManager.ExportOptionsCache.FilterViewForExport);
if (rebarGeometry != null)
{
rebarEntity = ProxyElementExporter.ExportBuildingElementProxy(exporterIFC, rebarElement, rebarGeometry, productWrapper);
}
cannotExportRebar = IFCAnyHandleUtil.IsNullOrHasNoValue(rebarEntity);
}
}
return(rebarEntity);
}
/// <summary>
/// Exports a railing to IFC railing
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="railing">
/// The ceiling element to be exported.
/// </param>
/// <param name="geomElement">
/// The geometry element.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportRailingElement(ExporterIFC exporterIFC, Railing railing, ProductWrapper productWrapper)
{
if (railing == null)
{
return;
}
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
GeometryElement geomElement = GeometryUtil.GetOneLevelGeometryElement(railing.get_Geometry(geomOptions), 0);
// If this is a multistory railing, the geometry will contain all of the levels of railing. We only want one.
if (geomElement == null)
{
return;
}
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, railing, out ifcEnumType);
if (exportType.IsUnKnown)
{
ifcEnumType = ExporterUtil.GetIFCTypeFromExportTable(exporterIFC, railing);
}
ExportRailing(exporterIFC, railing, geomElement, ifcEnumType, productWrapper);
}
/// <summary>
/// Exports a fabrication part to corresponding IFC object.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element to be exported.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static bool ExportElement(ExporterIFC exporterIFC,
Element element, GeometryElement geometryElement, ProductWrapper productWrapper)
{
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, element, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
IFCEntityType elementClassTypeEnum;
if (Enum.TryParse(exportType.ExportInstance.ToString(), out elementClassTypeEnum) ||
Enum.TryParse(exportType.ExportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(false);
}
}
if (ExportGenericElementAsMappedItem(exporterIFC, element, geometryElement,
exportType, productWrapper))
{
return(true);
}
if (FamilyInstanceExporter.ExportGenericToSpecificElement(exporterIFC,
element, ref geometryElement, exportType, ifcEnumType, productWrapper))
{
return(true);
}
return(ExportSimpleGenericElement(exporterIFC, element, geometryElement, productWrapper,
exportType) != null);
}
/// <summary>
/// Exports a roof element to the appropriate IFC entity.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="roof">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void Export(ExporterIFC exporterIFC, RoofBase roof, ref GeometryElement geometryElement, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// export parts or not
bool exportParts = PartExporter.CanExportParts(roof);
bool exportAsCurtainRoof = CurtainSystemExporter.IsCurtainSystem(roof);
// if there is only a single part that we can get from the roof geometry, we will not create the aggregation with IfcSlab, but directly export the IfcRoof
bool exportAsSingleGeometry = false;
if (productWrapper != null && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
exportAsSingleGeometry = IFCAnyHandleUtil.IsNullOrHasNoValue(productWrapper.GetAnElement());
}
if (exportParts)
{
if (!PartExporter.CanExportElementInPartExport(roof, roof.LevelId, false))
{
return;
}
ExportRoofAsParts(exporterIFC, roof, geometryElement, productWrapper); // Right now, only flat roof could have parts.
}
else if (exportAsCurtainRoof)
{
CurtainSystemExporter.ExportCurtainRoof(exporterIFC, roof, productWrapper);
}
else
{
string ifcEnumType;
IFCExportInfoPair roofExportType = ExporterUtil.GetProductExportType(exporterIFC, roof, out ifcEnumType);
if (roofExportType.ExportInstance != IFCEntityType.IfcRoof)
{
ExportRoof(exporterIFC, roof, ref geometryElement, productWrapper, exportAsSingleGeometry);
}
else
{
IFCAnyHandle roofHnd = ExportRoofOrFloorAsContainer(exporterIFC, roof,
geometryElement, productWrapper);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(roofHnd))
{
ExportRoof(exporterIFC, roof, ref geometryElement, productWrapper, exportAsSingleGeometry);
}
}
// call for host objects; curtain roofs excused from call (no material information)
if (!ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, roof, productWrapper.GetAnElement(),
geometryElement, productWrapper, ElementId.InvalidElementId, IFCLayerSetDirection.Axis3, null, null);
}
}
tr.Commit();
}
}
/// <summary>
/// Checks if it is a door or window opening for a wall.
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="openingElem">The opening element.</param>
/// <param name="hostElement">The host element.</param>
/// <returns>True if it is a door or window opening for a wall.</returns>
public static bool IsDoorOrWindowOpening(ExporterIFC exporterIFC, Element openingElem, Element hostElement)
{
if (openingElem is FamilyInstance && hostElement is Wall)
{
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, openingElem, out ifcEnumType);
Element instHost = (openingElem as FamilyInstance).Host;
return((exportType.ExportInstance == IFCEntityType.IfcDoor || exportType.ExportType == IFCEntityType.IfcDoorType ||
exportType.ExportInstance == IFCEntityType.IfcWindow || exportType.ExportType == IFCEntityType.IfcWindowType) &&
(instHost != null /* && instHost.Id == hostElement.Id*/));
}
return(false);
}
/// <summary>
/// Export the roof to IfcRoof containing its parts.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRoofAsParts(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement, ProductWrapper productWrapper)
{
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, element, out ifcEnumType);
if (exportType.IsUnKnown)
{
exportType = new IFCExportInfoPair(IFCEntityType.IfcRoof);
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(exportType.ExportType))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = setter.LocalPlacement;
IFCAnyHandle prodRepHnd = null;
string elementGUID = GUIDUtil.CreateGUID(element);
IFCAnyHandle roofHandle = IFCInstanceExporter.CreateGenericIFCEntity(
exportType, exporterIFC,
element, elementGUID, ownerHistory,
localPlacement, prodRepHnd);
// Export the parts
PartExporter.ExportHostPart(exporterIFC, element, roofHandle, productWrapper, setter, localPlacement, null);
productWrapper.AddElement(element, roofHandle, setter, null, true, exportType);
transaction.Commit();
}
}
}
/// <summary>
/// Exports topography surface as IFC site object.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="topoSurface">The TopographySurface object.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportTopographySurface(ExporterIFC exporterIFC, TopographySurface topoSurface, GeometryElement geometryElement, ProductWrapper productWrapper)
{
// Skip if the element is already processed and the Site has been created before
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(ExporterCacheManager.SiteHandle) && !IFCAnyHandleUtil.IsNullOrHasNoValue(ExporterCacheManager.ElementToHandleCache.Find(topoSurface.Id)))
{
return;
}
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, topoSurface, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportInstance.ToString(), out elementClassTypeEnum) ||
Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
if (elementClassTypeEnum == Common.Enums.IFCEntityType.IfcSite)
{
ExportSiteBase(exporterIFC, topoSurface.Document, topoSurface, geometryElement, productWrapper);
}
else
{
// Export Default Site first before exporting the TopographySurface as a generic element
ExportDefaultSite(exporterIFC, topoSurface.Document, productWrapper);
using (ProductWrapper genElemProductWrapper = ProductWrapper.Create(exporterIFC, true))
{
GenericElementExporter.ExportSimpleGenericElement(exporterIFC, topoSurface, geometryElement, genElemProductWrapper, exportType);
ExporterUtil.ExportRelatedProperties(exporterIFC, topoSurface, genElemProductWrapper);
}
productWrapper.ClearInternalHandleWrapperData(topoSurface.Document.ProjectInformation);
}
}
else
{
ExportSiteBase(exporterIFC, null, topoSurface, geometryElement, productWrapper);
}
}
/// <summary>
/// Exports text note elements.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="textNote">
/// The text note element.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void Export(ExporterIFC exporterIFC, TextNote textNote, ProductWrapper productWrapper)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
string predefinedType = null;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, textNote, out predefinedType);
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(exportType.ExportInstance))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
string textString = textNote.Text;
if (String.IsNullOrEmpty(textString))
{
throw new Exception("TextNote does not have test string.");
}
ElementId symId = textNote.GetTypeId();
if (symId == ElementId.InvalidElementId)
{
throw new Exception("TextNote does not have valid type id.");
}
PresentationStyleAssignmentCache cache = ExporterCacheManager.PresentationStyleAssignmentCache;
IFCAnyHandle presHnd = cache.Find(symId);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(presHnd))
{
TextElementType textElemType = textNote.Symbol;
CreatePresentationStyleAssignmentForTextElementType(exporterIFC, textElemType, cache);
presHnd = cache.Find(symId);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(presHnd))
{
throw new Exception("Failed to create presentation style assignment for TextElementType.");
}
}
HashSet <IFCAnyHandle> presHndSet = new HashSet <IFCAnyHandle>();
presHndSet.Add(presHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, textNote))
{
const double planScale = 100.0; // currently hardwired.
XYZ orig = UnitUtil.ScaleLength(textNote.Coord);
XYZ yDir = textNote.UpDirection;
XYZ xDir = textNote.BaseDirection;
XYZ zDir = xDir.CrossProduct(yDir);
double sizeX = UnitUtil.ScaleLength(textNote.Width * planScale);
double sizeY = UnitUtil.ScaleLength(textNote.Height * planScale);
// When we display text on screen, we "flip" it if the xDir is negative with relation to
// the X-axis. So if it is, we'll flip x and y.
bool flipOrig = false;
if (xDir.X < 0)
{
xDir = xDir.Multiply(-1.0);
yDir = yDir.Multiply(-1.0);
flipOrig = true;
}
// xFactor, yFactor only used if flipOrig.
double xFactor = 0.0, yFactor = 0.0;
string boxAlignment = ConvertTextNoteAlignToBoxAlign(textNote, out xFactor, out yFactor);
// modify the origin to match the alignment. In Revit, the origin is at the top-left (unless flipped,
// then bottom-right).
if (flipOrig)
{
orig = orig.Add(xDir.Multiply(sizeX * xFactor));
orig = orig.Add(yDir.Multiply(sizeY * yFactor));
}
IFCAnyHandle origin = ExporterUtil.CreateAxis(file, orig, zDir, xDir);
IFCAnyHandle extent = IFCInstanceExporter.CreatePlanarExtent(file, sizeX, sizeY);
IFCAnyHandle repItemHnd = IFCInstanceExporter.CreateTextLiteralWithExtent(file, textString, origin, Toolkit.IFCTextPath.Left, extent, boxAlignment);
IFCAnyHandle annoTextOccHnd = IFCInstanceExporter.CreateStyledItem(file, repItemHnd, presHndSet, null);
ElementId catId = textNote.Category != null ? textNote.Category.Id : ElementId.InvalidElementId;
HashSet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>();
bodyItems.Add(repItemHnd);
IFCAnyHandle bodyRepHnd = RepresentationUtil.CreateAnnotationSetRep(exporterIFC, textNote, catId, exporterIFC.Get2DContextHandle(), bodyItems);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRepHnd))
{
throw new Exception("Failed to create shape representation.");
}
IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
shapeReps.Add(bodyRepHnd);
IFCAnyHandle prodShapeHnd = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps);
IFCAnyHandle instHnd;
if (exportType.ExportInstance == Common.Enums.IFCEntityType.IfcAnnotation)
{
instHnd = IFCInstanceExporter.CreateAnnotation(exporterIFC, textNote, GUIDUtil.CreateGUID(), ExporterCacheManager.OwnerHistoryHandle,
setter.LocalPlacement, prodShapeHnd);
}
else
{
instHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, textNote, GUIDUtil.CreateGUID(), ExporterCacheManager.OwnerHistoryHandle,
setter.LocalPlacement, prodShapeHnd);
}
productWrapper.AddAnnotation(instHnd, setter.LevelInfo, true);
}
tr.Commit();
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, ref GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, floorElement, out ifcEnumType);
IFCAnyHandle type = null;
if (!ElementFilteringUtil.IsElementVisible(floorElement))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportInstance.ToString(), out elementClassTypeEnum) ||
Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
Document doc = floorElement.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
MaterialLayerSetInfo layersetInfo = new MaterialLayerSetInfo(exporterIFC, floorElement, productWrapper);
// For IFC4RV export, Element will be split into its parts(temporarily) in order to export the wall by its parts
// If Parts are created by code and not by user then their names should be equal to Material names.
bool setMaterialNameToPartName = ExporterUtil.CreateParts(floorElement, layersetInfo.MaterialIds.Count, ref geometryElement);
ExporterUtil.ExportPartAs exportPartAs = ExporterUtil.CanExportByComponentsOrParts(floorElement);
bool exportByComponents = exportPartAs == ExporterUtil.ExportPartAs.ShapeAspect;
bool exportParts = exportPartAs == ExporterUtil.ExportPartAs.Part;
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
// Try to export the Floor slab as a container. If that succeeds, we are done.
// If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave
// this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms.
IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, floorElement, geometryElement, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd))
{
tr.Commit();
return;
}
}
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, floorElement, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null && !ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (!exportParts)
{
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(floorElement.Document, exporterIFC, ref solids, ref meshes);
if (solids.Count == 1 && meshes.Count == 0)
{
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go through the Revit model origin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir);
GenerateAdditionalInfo additionalInfo = GenerateAdditionalInfo.GenerateBody;
additionalInfo |= ExporterCacheManager.ExportOptionsCache.ExportAs4 ?
GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None;
// Skip generate body item for IFC4RV. It will be handled later in PartExporter.ExportHostPartAsShapeAspects()
if (exportByComponents)
{
additionalInfo &= ~GenerateAdditionalInfo.GenerateBody;
}
ExtrusionExporter.ExtraClippingData extraClippingData = null;
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement, false,
catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null,
out extraClippingData,
addInfo: additionalInfo);
if (extraClippingData.CompletelyClipped)
{
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
if (floorAndProperties.Handle != null)
{
representations.Add(floorAndProperties.Handle);
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
// Footprint representation will only be exported in export to IFC4
if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null))
{
IFCAnyHandle footprintShapeRep = floorAndProperties.FootprintInfo.CreateFootprintShapeRepresentation(exporterIFC);
representations.Add(footprintShapeRep);
}
if (exportByComponents)
{
IFCAnyHandle prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, representations);
prodReps.Add(prodRep);
}
else if (representations.Count > 0 && floorAndProperties.Handle != null) // Only when at least the body rep exists will come here
{
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
}
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion && !exportByComponents)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
PotentiallyFixPresentationLayerAssignment(floorElement, prodReps);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
// Footprint representation will only be exported in export to IFC4
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
if (extrusionLoops.Count > ii)
{
if (extrusionLoops[ii].Count > 0)
{
// Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement
Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]);
IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal);
IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint");
ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>();
repItem.Add(footprintGeomRepItem);
IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(footprintShapeRepresentation);
IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps);
}
}
}
}
}
IFCAnyHandle prodDefHnd;
if (prodReps.Count == 0)
{
if (exportByComponents)
{
prodDefHnd = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, null);
prodReps.Add(prodDefHnd);
}
else
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
// Deal with a couple of cases that have non-standard defaults.
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcCovering:
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCEntityType.IfcSlab:
bool isBaseSlab = false;
#pragma warning disable CS0612, CS0618//AnalyticalModel is obsolette
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
#pragma warning restore CS0612, CS0618
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
slabHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, floorElement, currentGUID, ownerHistory,
localPlacementHnd, exportParts ? null : prodReps[ii]);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (!string.IsNullOrEmpty(ifcName))
{
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, ifcName);
}
// Pre IFC4 Slab does not have PredefinedType
if (!string.IsNullOrEmpty(exportType.ValidatedPredefinedType) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
IFCAnyHandleUtil.SetAttribute(slabHnd, "PredefinedType", exportType.ValidatedPredefinedType, true);
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null, setMaterialNameToPartName);
}
else if (exportByComponents)
{
IFCExtrusionCreationData partECData = new IFCExtrusionCreationData();
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, floorElement, prodReps[ii],
productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, layersetInfo, partECData);
loopExtraParams.Add(partECData);
}
slabHnds.Add(slabHnd);
// For IFC4RV, export of the geometry is already handled in PartExporter.ExportHostPartAsShapeAspects()
if (!exportParts && !exportByComponents)
{
if (repTypes[ii] == ShapeRepresentationType.Brep || repTypes[ii] == ShapeRepresentationType.Tessellation)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true, exportType);
type = ExporterUtil.CreateGenericTypeFromElement(floorElement, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(type, slabHnds[ii]);
ExporterUtil.AddIntoComplexPropertyCache(slabHnds[ii], layersetInfo);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ISet <IFCAnyHandle> oldCreatedObjects = productWrapper.GetAllObjects();
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
ISet <IFCAnyHandle> newCreatedObjects = productWrapper.GetAllObjects();
newCreatedObjects.ExceptWith(oldCreatedObjects);
PotentiallyFixPresentationLayerAssignment(floorElement, newCreatedObjects);
}
}
if (!exportParts)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, productWrapper.GetAnElement(),
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
else
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true, type);
}
}
}
}
tr.Commit();
return;
}
}
}
/// <summary>
/// Exports a Rebar Coupler,
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="coupler">The RebarCoupler element.</param>
/// <param name="productWrapper">The product wrapper.</param>
public static void ExportCoupler(ExporterIFC exporterIFC, RebarCoupler coupler, ProductWrapper productWrapper)
{
if (coupler == null)
{
return;
}
ElementId typeId = coupler.GetTypeId();
FamilySymbol familySymbol = ExporterCacheManager.Document.GetElement(typeId) as FamilySymbol;
if (familySymbol == null)
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
IFCEntityType elementClassTypeEnum = IFCEntityType.IfcMechanicalFastener;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
ElementId categoryId = CategoryUtil.GetSafeCategoryId(coupler);
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
Options options = GeometryUtil.GetIFCExportGeometryOptions();;
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, coupler, out ifcEnumType);
using (IFCTransaction tr = new IFCTransaction(file))
{
FamilyTypeInfo currentTypeInfo = ExporterCacheManager.FamilySymbolToTypeInfoCache.Find(typeId, false, exportType);
bool found = currentTypeInfo.IsValid();
if (!found)
{
string typeObjectType = NamingUtil.CreateIFCObjectName(exporterIFC, familySymbol);
HashSet <IFCAnyHandle> propertySetsOpt = new HashSet <IFCAnyHandle>();
GeometryElement exportGeometry = familySymbol.get_Geometry(options);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
bodyData = BodyExporter.ExportBody(exporterIFC, coupler, categoryId, ElementId.InvalidElementId, exportGeometry, bodyExporterOptions, null);
List <IFCAnyHandle> repMap = new List <IFCAnyHandle>();
IFCAnyHandle origin = ExporterUtil.CreateAxis2Placement3D(file);;
repMap.Add(IFCInstanceExporter.CreateRepresentationMap(file, origin, bodyData.RepresentationHnd));
string typeGuid = GUIDUtil.CreateGUID(familySymbol);
IFCAnyHandle styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType,
ifcEnumType, propertySetsOpt, repMap, coupler, familySymbol, typeGuid);
productWrapper.RegisterHandleWithElementType(familySymbol, exportType, styleHandle, propertySetsOpt);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
currentTypeInfo.Style = styleHandle;
ExporterCacheManager.FamilySymbolToTypeInfoCache.Register(typeId, false, exportType, currentTypeInfo);
}
}
int nCouplerQuantity = coupler.GetCouplerQuantity();
if (nCouplerQuantity <= 0)
{
return;
}
ISet <IFCAnyHandle> createdRebarCouplerHandles = new HashSet <IFCAnyHandle>();
string origInstanceName = NamingUtil.GetNameOverride(coupler, NamingUtil.GetIFCName(coupler));
for (int idx = 0; idx < nCouplerQuantity; idx++)
{
string instanceGUID = GUIDUtil.CreateSubElementGUID(coupler, idx);
IFCAnyHandle style = currentTypeInfo.Style;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(style))
{
return;
}
IList <IFCAnyHandle> repMapList = GeometryUtil.GetRepresentationMaps(style);
if (repMapList == null)
{
return;
}
if (repMapList.Count == 0)
{
return;
}
IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
IFCAnyHandle contextOfItems3d = exporterIFC.Get3DContextHandle("Body");
ISet <IFCAnyHandle> representations = new HashSet <IFCAnyHandle>();
representations.Add(ExporterUtil.CreateDefaultMappedItem(file, repMapList[0], XYZ.Zero));
IFCAnyHandle shapeRep = RepresentationUtil.CreateBodyMappedItemRep(exporterIFC, coupler, categoryId, contextOfItems3d, representations);
shapeReps.Add(shapeRep);
IFCAnyHandle productRepresentation = IFCInstanceExporter.CreateProductDefinitionShape(exporterIFC.GetFile(), null, null, shapeReps);
Transform trf = coupler.GetCouplerPositionTransform(idx);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, coupler, trf, null))
{
IFCAnyHandle instanceHandle = null;
IFCExportInfoPair exportMechFastener = new IFCExportInfoPair(IFCEntityType.IfcMechanicalFastener, ifcEnumType);
instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(exportMechFastener, exporterIFC, coupler, instanceGUID, ownerHistory,
setter.LocalPlacement, productRepresentation);
string instanceName = NamingUtil.GetNameOverride(instanceHandle, coupler, origInstanceName + ": " + idx);
IFCAnyHandleUtil.OverrideNameAttribute(instanceHandle, instanceName);
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
// In IFC4 NominalDiameter and NominalLength attributes have been deprecated. PredefinedType attribute was added.
IFCAnyHandleUtil.SetAttribute(instanceHandle, "PredefinedType", Toolkit.IFC4.IFCMechanicalFastenerType.USERDEFINED);
}
else
{
IFCAnyHandleUtil.SetAttribute(instanceHandle, "NominalDiameter", familySymbol.get_Parameter(BuiltInParameter.COUPLER_WIDTH).AsDouble());
IFCAnyHandleUtil.SetAttribute(instanceHandle, "NominalLength", familySymbol.get_Parameter(BuiltInParameter.COUPLER_LENGTH).AsDouble());
}
createdRebarCouplerHandles.Add(instanceHandle);
productWrapper.AddElement(coupler, instanceHandle, setter, null, true, exportType);
}
}
string couplerGUID = GUIDUtil.CreateGUID(coupler);
if (nCouplerQuantity > 1)
{
// Create a group to hold all of the created IFC entities, if the coupler aren't already in an assembly.
// We want to avoid nested groups of groups of couplers.
if (coupler.AssemblyInstanceId == ElementId.InvalidElementId)
{
string revitObjectType = NamingUtil.GetFamilyAndTypeName(coupler);
string name = NamingUtil.GetNameOverride(coupler, revitObjectType);
string description = NamingUtil.GetDescriptionOverride(coupler, null);
string objectType = NamingUtil.GetObjectTypeOverride(coupler, revitObjectType);
IFCAnyHandle rebarGroup = IFCInstanceExporter.CreateGroup(file, couplerGUID,
ownerHistory, name, description, objectType);
productWrapper.AddElement(coupler, rebarGroup, exportType);
string groupGuid = GUIDUtil.GenerateIFCGuidFrom(IFCEntityType.IfcRelAssignsToGroup,
string.Empty, rebarGroup);
IFCInstanceExporter.CreateRelAssignsToGroup(file, groupGuid, ownerHistory,
null, null, createdRebarCouplerHandles, null, rebarGroup);
}
}
else
{
// We will update the GUID of the one created element to be the element GUID.
// This will allow the IfcGUID parameter to be use/set if appropriate.
ExporterUtil.SetGlobalId(createdRebarCouplerHandles.ElementAt(0), couplerGUID, coupler);
}
tr.Commit();
}
}
/// <summary>
/// Exports curtain object as container.
/// </summary>
/// <param name="allSubElements">
/// Collection of elements contained in the host curtain element.
/// </param>
/// <param name="wallElement">
/// The curtain wall element.
/// </param>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportCurtainObjectCommonAsContainer(ICollection <ElementId> allSubElements, Element wallElement,
ExporterIFC exporterIFC, ProductWrapper origWrapper, PlacementSetter currSetter)
{
if (wallElement == null)
{
return;
}
string overrideCADLayer = RepresentationUtil.GetPresentationLayerOverride(wallElement);
using (ExporterStateManager.CADLayerOverrideSetter layerSetter = new ExporterStateManager.CADLayerOverrideSetter(overrideCADLayer))
{
HashSet <ElementId> alreadyVisited = new HashSet <ElementId>(); // just in case.
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
{
foreach (ElementId subElemId in allSubElements)
{
using (ProductWrapper productWrapper = ProductWrapper.Create(origWrapper))
{
Element subElem = wallElement.Document.GetElement(subElemId);
if (subElem == null)
{
continue;
}
if (alreadyVisited.Contains(subElem.Id))
{
continue;
}
alreadyVisited.Add(subElem.Id);
// Respect element visibility settings.
if (!ElementFilteringUtil.CanExportElement(exporterIFC, subElem, false) || !ElementFilteringUtil.IsElementVisible(subElem))
{
continue;
}
GeometryElement geomElem = subElem.get_Geometry(geomOptions);
if (geomElem == null)
{
continue;
}
try
{
if (subElem is FamilyInstance)
{
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, subElem, out ifcEnumType);
if (subElem is Mullion)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs2x2)
{
ProxyElementExporter.Export(exporterIFC, subElem, geomElem, productWrapper, exportType);
}
else
{
IFCAnyHandle currLocalPlacement = currSetter.LocalPlacement;
if (exportType.ExportInstance == IFCEntityType.IfcCurtainWall)
{
// By default, panels and mullions are set to the same category as their parent. In this case,
// ask to get the exportType from the category id, since we don't want to inherit the parent class.
exportType.SetValueWithPair(IFCEntityType.IfcMemberType, "MULLION");
}
FamilyInstanceExporter.ExportFamilyInstanceAsMappedItem(exporterIFC, subElem as Mullion, exportType, exportType.ValidatedPredefinedType, productWrapper,
ElementId.InvalidElementId, null, currLocalPlacement);
}
}
else
{
FamilyInstance subFamInst = subElem as FamilyInstance;
if (exportType.ExportInstance == IFCEntityType.IfcCurtainWall)
{
// By default, panels and mullions are set to the same category as their parent. In this case,
// ask to get the exportType from the category id, since we don't want to inherit the parent class.
ElementId catId = CategoryUtil.GetSafeCategoryId(subElem);
exportType = ElementFilteringUtil.GetExportTypeFromCategoryId(catId);
}
if (ExporterCacheManager.ExportOptionsCache.ExportAs2x2)
{
if ((exportType.ExportInstance == IFCEntityType.UnKnown) ||
(exportType.ExportInstance == IFCEntityType.IfcPlate) ||
(exportType.ExportInstance == IFCEntityType.IfcMember))
{
exportType.SetValueWithPair(IFCEntityType.IfcBuildingElementProxy, ifcEnumType);
}
}
else
{
if (exportType.ExportInstance == IFCEntityType.UnKnown)
{
exportType.SetValueWithPair(IFCEntityType.IfcPlateType, "CURTAIN_PANEL");
}
}
IFCAnyHandle currLocalPlacement = currSetter.LocalPlacement;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
FamilyInstanceExporter.ExportFamilyInstanceAsMappedItem(exporterIFC, subFamInst, exportType, ifcEnumType, productWrapper,
ElementId.InvalidElementId, null, currLocalPlacement);
}
}
}
else if (subElem is CurtainGridLine)
{
ProxyElementExporter.Export(exporterIFC, subElem, geomElem, productWrapper);
}
else if (subElem is Wall)
{
WallExporter.ExportWall(exporterIFC, null, subElem, null, ref geomElem, productWrapper);
}
}
catch (Exception ex)
{
if (ExporterUtil.IsFatalException(wallElement.Document, ex))
{
throw ex;
}
continue;
}
}
}
}
}
}
/// <summary>
/// Exports a roof to IfcRoof.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="roof">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <param name="exportRoofAsSingleGeometry">Export roof as single geometry.</param>
public static void ExportRoof(ExporterIFC exporterIFC, Element roof, ref GeometryElement geometryElement,
ProductWrapper productWrapper, bool exportRoofAsSingleGeometry = false)
{
if (roof == null || geometryElement == null)
{
return;
}
string ifcEnumType;
IFCExportInfoPair roofExportType = ExporterUtil.GetProductExportType(exporterIFC, roof, out ifcEnumType);
if (roofExportType.IsUnKnown)
{
roofExportType = new IFCExportInfoPair(IFCEntityType.IfcRoof, "");
}
MaterialLayerSetInfo layersetInfo = new MaterialLayerSetInfo(exporterIFC, roof, productWrapper);
IFCFile file = exporterIFC.GetFile();
Document doc = roof.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
// For IFC4RV export, Roof will be split into its parts(temporarily) in order to export the roof by its parts
ExporterUtil.CreateParts(roof, layersetInfo.MaterialIds.Count, ref geometryElement);
bool exportByComponents = ExporterUtil.CanExportByComponentsOrParts(roof) == ExporterUtil.ExportPartAs.ShapeAspect;
using (IFCTransaction tr = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, roof, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, roof, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// If the roof is an in-place family, we will allow any arbitrary orientation. While this may result in some
// in-place "cubes" exporting with the wrong direction, it is unlikely that an in-place family would be
// used for this reason in the first place.
ecData.PossibleExtrusionAxes = (roof is FamilyInstance) ? IFCExtrusionAxes.TryXYZ : IFCExtrusionAxes.TryZ;
ecData.AreInnerRegionsOpenings = true;
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(roof);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
BodyData bodyData = null;
IFCAnyHandle prodRep = null;
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
IList <ElementId> materialIds = new List <ElementId>();
if (!exportByComponents)
{
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, roof,
categoryId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (bodyData != null && bodyData.MaterialIds != null)
{
materialIds = bodyData.MaterialIds;
}
}
else
{
prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, roof, categoryId, geometryElement, representations);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
bool exportSlab = ((ecData.ScaledLength > MathUtil.Eps() || exportByComponents) &&
roofExportType.ExportInstance == IFCEntityType.IfcRoof && !exportRoofAsSingleGeometry);
string guid = GUIDUtil.CreateGUID(roof);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle roofHnd = IFCInstanceExporter.CreateGenericIFCEntity(
roofExportType, exporterIFC, roof, guid, ownerHistory,
localPlacement, exportSlab ? null : prodRep);
IFCAnyHandle typeHnd = ExporterUtil.CreateGenericTypeFromElement(roof,
roofExportType, file, ownerHistory, roofExportType.ValidatedPredefinedType,
productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(typeHnd, roofHnd);
productWrapper.AddElement(roof, roofHnd, placementSetter.LevelInfo, ecData, true, roofExportType);
if (!(roof is RoofBase))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, materialIds);
}
if (exportByComponents && (exportSlab || exportRoofAsSingleGeometry))
{
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, roof, prodRep,
productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, layersetInfo, ecData);
}
Transform offsetTransform = (bodyData != null) ? bodyData.OffsetTransform : Transform.Identity;
if (exportSlab)
{
string slabGUID = GUIDUtil.CreateSubElementGUID(roof, (int)IFCRoofSubElements.RoofSlabStart);
IFCAnyHandle slabLocalPlacementHnd = ExporterUtil.CopyLocalPlacement(file, localPlacement);
string slabName = IFCAnyHandleUtil.GetStringAttribute(roofHnd, "Name") + ":1";
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(exporterIFC, roof, slabGUID, ownerHistory,
slabLocalPlacementHnd, prodRep, slabRoofPredefinedType);
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, slabName);
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, roof, ecData, offsetTransform,
exporterIFC, slabLocalPlacementHnd, placementSetter, productWrapper);
ExporterUtil.RelateObject(exporterIFC, roofHnd, slabHnd);
IFCExportInfoPair slabRoofExportType = new IFCExportInfoPair(IFCEntityType.IfcSlab, slabRoofPredefinedType);
productWrapper.AddElement(null, slabHnd, placementSetter.LevelInfo, ecData, false, slabRoofExportType);
// Create type
IFCAnyHandle slabRoofTypeHnd = ExporterUtil.CreateGenericTypeFromElement(roof, slabRoofExportType, exporterIFC.GetFile(), ownerHistory, slabRoofPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(slabRoofTypeHnd, slabHnd);
ExporterUtil.AddIntoComplexPropertyCache(slabHnd, layersetInfo);
// For earlier than IFC4 version of IFC export, the material association will be done at the Roof host level with MaterialSetUsage
// This one is only for IFC4 and above
if ((roof is RoofBase) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
if (layersetInfo != null && !IFCAnyHandleUtil.IsNullOrHasNoValue(layersetInfo.MaterialLayerSetHandle))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, layersetInfo.MaterialLayerSetHandle);
}
else if (bodyData != null)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, bodyData.MaterialIds);
}
}
}
else
{
OpeningUtil.CreateOpeningsIfNecessary(roofHnd, roof, ecData, offsetTransform,
exporterIFC, localPlacement, placementSetter, productWrapper);
// For earlier than IFC4 version of IFC export, the material association will be done at the Roof host level with MaterialSetUsage
// This one is only for IFC4 and above
if ((roof is RoofBase) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
if (layersetInfo != null && !IFCAnyHandleUtil.IsNullOrHasNoValue(layersetInfo.MaterialLayerSetHandle))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, layersetInfo.MaterialLayerSetHandle);
}
else if (layersetInfo != null && layersetInfo.MaterialIds != null)
{
materialIds = layersetInfo.MaterialIds.Select(x => x.m_baseMatId).ToList();
CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, materialIds);
}
}
}
}
tr.Commit();
}
}
}
}
/// <summary>
/// Exports a roof or floor as a container of multiple roof slabs. Returns the handle, if successful.
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="element">The roof or floor element.</param>
/// <param name="geometry">The geometry of the element.</param>
/// <param name="productWrapper">The product wrapper.</param>
/// <returns>The roof handle.</returns>
/// <remarks>For floors, if there is only one component, return null, as we do not want to create a container.</remarks>
public static IFCAnyHandle ExportRoofOrFloorAsContainer(ExporterIFC exporterIFC,
Element element, GeometryElement geometry, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
// We support ExtrusionRoofs, FootPrintRoofs, and Floors only.
bool elementIsRoof = (element is ExtrusionRoof) || (element is FootPrintRoof);
bool elementIsFloor = (element is Floor);
if (!elementIsRoof && !elementIsFloor)
{
return(null);
}
string subSlabType = null;
IFCExportInfoPair roofExportType = ExporterUtil.GetProductExportType(exporterIFC, element, out _);
if (roofExportType.IsUnKnown)
{
IFCEntityType elementClassTypeEnum =
elementIsFloor ? IFCEntityType.IfcSlab: IFCEntityType.IfcRoof;
roofExportType = new IFCExportInfoPair(elementClassTypeEnum, "");
}
else
{
if (elementIsFloor)
{
subSlabType = "FLOOR";
}
else if (elementIsRoof)
{
subSlabType = "ROOF";
}
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(roofExportType.ExportType))
{
return(null);
}
Document doc = element.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
using (IFCTransaction transaction = new IFCTransaction(file))
{
MaterialLayerSetInfo layersetInfo = new MaterialLayerSetInfo(exporterIFC, element, productWrapper);
bool hasLayers = false;
if (layersetInfo.MaterialIds.Count > 1)
{
hasLayers = true;
}
bool exportByComponents = ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView && hasLayers;
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
// We want to delay creating entity handles until as late as possible, so that if we abort the IFC transaction,
// we don't have to delete elements. This is both for performance reasons and to potentially extend the number
// of projects that can be exported by reducing (a small amount) of waste.
IList <HostObjectSubcomponentInfo> hostObjectSubcomponents = null;
try
{
hostObjectSubcomponents = ExporterIFCUtils.ComputeSubcomponents(element as HostObject);
}
catch
{
return(null);
}
if (hostObjectSubcomponents == null)
{
return(null);
}
int numSubcomponents = hostObjectSubcomponents.Count;
if (numSubcomponents == 0 || (elementIsFloor && numSubcomponents == 1))
{
return(null);
}
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = setter.LocalPlacement;
IFCAnyHandle hostObjectHandle = null;
try
{
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
extrusionCreationData.SetLocalPlacement(localPlacement);
extrusionCreationData.ReuseLocalPlacement = true;
using (TransformSetter trfSetter = TransformSetter.Create())
{
IList <GeometryObject> geometryList = new List <GeometryObject>();
geometryList.Add(geometry);
trfSetter.InitializeFromBoundingBox(exporterIFC, geometryList, extrusionCreationData);
IFCAnyHandle prodRepHnd = null;
string elementGUID = GUIDUtil.CreateGUID(element);
hostObjectHandle = IFCInstanceExporter.CreateGenericIFCEntity(
roofExportType, exporterIFC, element, elementGUID, ownerHistory,
localPlacement, prodRepHnd);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(hostObjectHandle))
{
return(null);
}
IList <IFCAnyHandle> elementHandles = new List <IFCAnyHandle>();
elementHandles.Add(hostObjectHandle);
// If element is floor, then the profile curve loop of hostObjectSubComponent is computed from the top face of the floor
// else if element is roof, then the profile curve loop is taken from the bottom face of the roof instead
XYZ extrusionDir = elementIsFloor ? new XYZ(0, 0, -1) : new XYZ(0, 0, 1);
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
IList <IFCAnyHandle> slabHandles = new List <IFCAnyHandle>();
IList <CurveLoop> hostObjectOpeningLoops = new List <CurveLoop>();
double maximumScaledDepth = 0.0;
using (IFCExtrusionCreationData slabExtrusionCreationData = new IFCExtrusionCreationData())
{
slabExtrusionCreationData.SetLocalPlacement(extrusionCreationData.GetLocalPlacement());
slabExtrusionCreationData.ReuseLocalPlacement = false;
slabExtrusionCreationData.ForceOffset = true;
int loopNum = 0;
int subElementStart = elementIsRoof ? (int)IFCRoofSubElements.RoofSlabStart : (int)IFCSlabSubElements.SubSlabStart;
foreach (HostObjectSubcomponentInfo hostObjectSubcomponent in hostObjectSubcomponents)
{
trfSetter.InitializeFromBoundingBox(exporterIFC, geometryList, slabExtrusionCreationData);
Plane plane = hostObjectSubcomponent.GetPlane();
Transform lcs = GeometryUtil.CreateTransformFromPlane(plane);
IList <CurveLoop> curveLoops = new List <CurveLoop>();
CurveLoop slabCurveLoop = hostObjectSubcomponent.GetCurveLoop();
curveLoops.Add(slabCurveLoop);
double slope = Math.Abs(plane.Normal.Z);
double scaledDepth = UnitUtil.ScaleLength(hostObjectSubcomponent.Depth);
double scaledExtrusionDepth = scaledDepth * slope;
IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
IFCAnyHandle prodDefShape = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps);
string shapeIdent = "Body";
IFCAnyHandle contextOfItems = exporterIFC.Get3DContextHandle(shapeIdent);
string representationType = ShapeRepresentationType.SweptSolid.ToString();
// Create representation items based on the layers
// Because in this case, the Roof components are not derived from Parts, but by "splitting" geometry part that can be extruded,
// the creation of the Items for IFC4RV will be different by using "manual" split based on the layer thickness
HashSet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>();
if (!exportByComponents)
{
IFCAnyHandle itemShapeRep = ExtrusionExporter.CreateExtrudedSolidFromCurveLoop(exporterIFC, null, curveLoops, lcs, extrusionDir, scaledExtrusionDepth, false);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(itemShapeRep))
{
productWrapper.ClearInternalHandleWrapperData(element);
return(null);
}
ElementId matId = HostObjectExporter.GetFirstLayerMaterialId(element as HostObject);
BodyExporter.CreateSurfaceStyleForRepItem(exporterIFC, element.Document, false, itemShapeRep, matId);
bodyItems.Add(itemShapeRep);
}
else
{
double scaleProj = extrusionDir.DotProduct(plane.Normal);
foreach (MaterialLayerSetInfo.MaterialInfo matLayerInfo in layersetInfo.MaterialIds)
{
double itemExtrDepth = matLayerInfo.m_matWidth;
IFCAnyHandle itemShapeRep = ExtrusionExporter.CreateExtrudedSolidFromCurveLoop(exporterIFC, null, curveLoops, lcs, extrusionDir, itemExtrDepth, false);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(itemShapeRep))
{
productWrapper.ClearInternalHandleWrapperData(element);
return(null);
}
BodyExporter.CreateSurfaceStyleForRepItem(exporterIFC, element.Document, false, itemShapeRep, matLayerInfo.m_baseMatId);
bodyItems.Add(itemShapeRep);
RepresentationUtil.CreateRepForShapeAspect(exporterIFC, element, prodDefShape, representationType, matLayerInfo.m_layerName, itemShapeRep);
XYZ offset = new XYZ(0, 0, itemExtrDepth / scaleProj); // offset is calculated as extent in the direction of extrusion
lcs.Origin += offset;
}
}
IFCAnyHandle shapeRep = RepresentationUtil.CreateSweptSolidRep(exporterIFC, element, catId, exporterIFC.Get3DContextHandle("Body"), bodyItems, null);
shapeReps.Add(shapeRep);
IFCAnyHandleUtil.SetAttribute(prodDefShape, "Representations", shapeReps);
// Allow support for up to 256 named IfcSlab components, as defined in IFCSubElementEnums.cs.
string slabGUID = (loopNum < 256) ? GUIDUtil.CreateSubElementGUID(element, subElementStart + loopNum) : GUIDUtil.CreateGUID();
IFCAnyHandle slabPlacement = ExporterUtil.CreateLocalPlacement(file, slabExtrusionCreationData.GetLocalPlacement(), null);
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(exporterIFC, element, slabGUID, ownerHistory,
slabPlacement, prodDefShape, subSlabType);
IFCExportInfoPair exportType = new IFCExportInfoPair(IFCEntityType.IfcSlab, subSlabType);
//slab quantities
slabExtrusionCreationData.ScaledLength = scaledExtrusionDepth;
slabExtrusionCreationData.ScaledArea = UnitUtil.ScaleArea(UnitUtil.ScaleArea(hostObjectSubcomponent.AreaOfCurveLoop));
slabExtrusionCreationData.ScaledOuterPerimeter = UnitUtil.ScaleLength(curveLoops[0].GetExactLength());
slabExtrusionCreationData.Slope = UnitUtil.ScaleAngle(MathUtil.SafeAcos(Math.Abs(slope)));
IFCExportInfoPair slabRoofExportType = new IFCExportInfoPair(IFCEntityType.IfcSlab, subSlabType);
productWrapper.AddElement(null, slabHnd, setter, slabExtrusionCreationData, false, slabRoofExportType);
// Create type
IFCAnyHandle slabRoofTypeHnd = ExporterUtil.CreateGenericTypeFromElement(element, slabRoofExportType, exporterIFC.GetFile(), ownerHistory, subSlabType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(slabRoofTypeHnd, slabHnd);
elementHandles.Add(slabHnd);
slabHandles.Add(slabHnd);
hostObjectOpeningLoops.Add(slabCurveLoop);
maximumScaledDepth = Math.Max(maximumScaledDepth, scaledDepth);
loopNum++;
ExporterUtil.AddIntoComplexPropertyCache(slabHnd, layersetInfo);
// Create material association here
if (layersetInfo != null && !IFCAnyHandleUtil.IsNullOrHasNoValue(layersetInfo.MaterialLayerSetHandle))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, layersetInfo.MaterialLayerSetHandle);
}
}
}
productWrapper.AddElement(element, hostObjectHandle, setter, extrusionCreationData, true, roofExportType);
ExporterUtil.RelateObjects(exporterIFC, null, hostObjectHandle, slabHandles);
OpeningUtil.AddOpeningsToElement(exporterIFC, elementHandles, hostObjectOpeningLoops, element, null, maximumScaledDepth,
null, setter, localPlacement, productWrapper);
transaction.Commit();
return(hostObjectHandle);
}
}
}
catch
{
// SOmething wrong with the above process, unable to create the extrusion data. Reset any internal handles that may have been partially created since they are not committed
productWrapper.ClearInternalHandleWrapperData(element);
return(null);
}
finally
{
exporterIFC.ClearFaceWithElementHandleMap();
}
}
}
}
}
/// <summary>
/// Exports an element as IFC railing.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element to be exported.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportRailing(ExporterIFC exporterIFC, Element element, GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRailing;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType;
IFCFile file = exporterIFC.GetFile();
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
using (IFCTransaction transaction = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
IFCAnyHandle localPlacement = setter.LocalPlacement;
StairRampContainerInfo stairRampInfo = null;
ElementId hostId = GetStairOrRampHostId(exporterIFC, element as Railing);
Transform inverseTrf = Transform.Identity;
if (hostId != ElementId.InvalidElementId)
{
stairRampInfo = ExporterCacheManager.StairRampContainerInfoCache.GetStairRampContainerInfo(hostId);
IFCAnyHandle stairRampLocalPlacement = stairRampInfo.LocalPlacements[0];
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(stairRampLocalPlacement, localPlacement);
inverseTrf = relTrf.Inverse;
IFCAnyHandle railingLocalPlacement = ExporterUtil.CreateLocalPlacement(file, stairRampLocalPlacement,
inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
localPlacement = railingLocalPlacement;
}
ecData.SetLocalPlacement(localPlacement);
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geomElem);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document, exporterIFC, ref solids, ref meshes);
Railing railingElem = element as Railing;
IList <ElementId> subElementIds = CollectSubElements(railingElem);
foreach (ElementId subElementId in subElementIds)
{
Element subElement = railingElem.Document.GetElement(subElementId);
if (subElement != null)
{
GeometryElement subElementGeom = GeometryUtil.GetOneLevelGeometryElement(subElement.get_Geometry(geomOptions), 0);
SolidMeshGeometryInfo subElementSolidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(subElementGeom);
IList <Solid> subElemSolids = subElementSolidMeshInfo.GetSolids();
IList <Mesh> subElemMeshes = subElementSolidMeshInfo.GetMeshes();
IList <GeometryObject> partGObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document, exporterIFC, ref subElemSolids, ref subElemMeshes);
foreach (Solid subElSolid in subElemSolids)
{
solids.Add(subElSolid);
}
foreach (Mesh subElMesh in subElemMeshes)
{
meshes.Add(subElMesh);
}
}
}
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId, ElementId.InvalidElementId, solids, meshes, bodyExporterOptions, ecData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geomElem);
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId, ElementId.InvalidElementId, geomlist, bodyExporterOptions, ecData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
if (ecData != null)
{
ecData.ClearOpenings();
}
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IList <GeometryObject> geomObjects = new List <GeometryObject>(solids);
foreach (Mesh mesh in meshes)
{
geomObjects.Add(mesh);
}
Transform boundingBoxTrf = (bodyData.OffsetTransform != null) ? bodyData.OffsetTransform.Inverse : Transform.Identity;
boundingBoxTrf = inverseTrf.Multiply(boundingBoxTrf);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geomObjects, boundingBoxTrf);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string instanceGUID = GUIDUtil.CreateGUID(element);
IFCExportInfoPair exportInfo = ExporterUtil.GetProductExportType(exporterIFC, element, out ifcEnumType);
IFCAnyHandle railing = IFCInstanceExporter.CreateGenericIFCEntity(exportInfo, exporterIFC, element, instanceGUID, ownerHistory,
ecData.GetLocalPlacement(), prodRep);
bool associateToLevel = (hostId == ElementId.InvalidElementId);
productWrapper.AddElement(element, railing, setter, ecData, associateToLevel, exportInfo);
OpeningUtil.CreateOpeningsIfNecessary(railing, element, ecData, bodyData.OffsetTransform,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
IFCAnyHandle singleMaterialOverrideHnd = null;
IList <ElementId> matIds = null;
ElementId defaultMatId = ElementId.InvalidElementId;
ElementId matId = CategoryUtil.GetBaseMaterialIdForElement(element);
// Get IfcSingleMaterialOverride to work for railing
singleMaterialOverrideHnd = ExporterUtil.GetSingleMaterial(exporterIFC, element, matId);
if (singleMaterialOverrideHnd != null)
{
matIds = new List <ElementId> {
matId
};
}
else
{
matIds = bodyData.MaterialIds;
defaultMatId = matIds[0];
// Check if all the items are the same, then get the first material id
if (matIds.All(x => x == defaultMatId))
{
matIds = new List <ElementId> {
defaultMatId
};
}
}
CategoryUtil.CreateMaterialAssociationWithShapeAspect(exporterIFC, element, railing, bodyData.RepresentationItemInfo);
// Create multi-story duplicates of this railing.
if (stairRampInfo != null)
{
stairRampInfo.AddComponent(0, railing);
List <IFCAnyHandle> stairHandles = stairRampInfo.StairOrRampHandles;
for (int ii = 1; ii < stairHandles.Count; ii++)
{
IFCAnyHandle railingLocalPlacement = stairRampInfo.LocalPlacements[ii];
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(railingLocalPlacement))
{
IFCAnyHandle railingHndCopy = CopyRailingHandle(exporterIFC, element, catId, railingLocalPlacement, railing);
stairRampInfo.AddComponent(ii, railingHndCopy);
productWrapper.AddElement(element, railingHndCopy, (IFCLevelInfo)null, ecData, false, exportInfo);
CategoryUtil.CreateMaterialAssociationWithShapeAspect(exporterIFC, element, railingHndCopy, bodyData.RepresentationItemInfo);
}
}
ExporterCacheManager.StairRampContainerInfoCache.AddStairRampContainerInfo(hostId, stairRampInfo);
}
}
transaction.Commit();
}
}
}
/// <summary>
/// Adds openings to an element.
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="elementHandles">The parent handles.</param>
/// <param name="curveLoops">The parent CurveLoops.</param>
/// <param name="element">The element.</param>
/// <param name="lcs">The local coordinate system.</param>
/// <param name="scaledWidth">The width.</param>
/// <param name="range">The range.</param>
/// <param name="setter">The placement setter.</param>
/// <param name="localPlacement">The local placement.</param>
/// <param name="localWrapper">The wrapper.</param>
public static void AddOpeningsToElement(ExporterIFC exporterIFC,
IList <IFCAnyHandle> elementHandles, IList <CurveLoop> curveLoops, Element element,
Transform lcs, double scaledWidth, IFCRange range, PlacementSetter setter,
IFCAnyHandle localPlacement, ProductWrapper localWrapper)
{
if (lcs == null && ((curveLoops?.Count ?? 0) > 0))
{
// assumption: first curve loop defines the plane.
Plane hostObjPlane = curveLoops[0].HasPlane() ? curveLoops[0].GetPlane(): null;
if (hostObjPlane != null)
{
lcs = GeometryUtil.CreateTransformFromPlane(hostObjPlane);
}
}
IList <IFCOpeningData> openingDataList = ExporterIFCUtils.GetOpeningData(exporterIFC,
element, lcs, range);
IFCFile file = exporterIFC.GetFile();
int openingIndex = 0;
foreach (IFCOpeningData openingData in openingDataList)
{
openingIndex++;
Element openingElem = element.Document.GetElement(openingData.OpeningElementId);
if (openingElem == null)
{
openingElem = element;
}
bool currentWallIsHost = false;
FamilyInstance openingFInst = openingElem as FamilyInstance;
if (openingFInst != null && openingFInst.Host != null)
{
if (openingFInst.Host.Id == element.Id)
{
currentWallIsHost = true;
}
}
// Don't export the opening if WallSweep category has been turned off.
// This is currently restricted to WallSweeps because the element responsible for the opening could be a variety of things,
// including a line as part of the elevation profile of the wall.
// As such, we will restrict which element types we check for CanExportElement.
if ((openingElem is WallSweep) &&
(!ElementFilteringUtil.CanExportElement(exporterIFC, openingElem, true)))
{
continue;
}
IList <IFCExtrusionData> extrusionDataList = openingData.GetExtrusionData();
IFCAnyHandle parentHandle = FindParentHandle(elementHandles, curveLoops, extrusionDataList);
string predefinedType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC,
openingElem, out predefinedType);
bool exportingDoorOrWindow = (exportType.ExportInstance == IFCEntityType.IfcDoor ||
exportType.ExportType == IFCEntityType.IfcDoorType ||
exportType.ExportInstance == IFCEntityType.IfcWindow ||
exportType.ExportType == IFCEntityType.IfcWindowType);
bool isDoorOrWindowOpening = IsDoorOrWindowOpening(openingElem, element,
exportingDoorOrWindow);
if (isDoorOrWindowOpening && currentWallIsHost)
{
DoorWindowDelayedOpeningCreator delayedCreator =
DoorWindowDelayedOpeningCreator.Create(exporterIFC, openingData, scaledWidth,
element.Id, parentHandle, setter.LevelId);
if (delayedCreator != null)
{
ExporterCacheManager.DoorWindowDelayedOpeningCreatorCache.Add(delayedCreator);
continue;
}
}
IList <Solid> solids = openingData.GetOpeningSolids();
int solidIndex = 0;
foreach (Solid solid in solids)
{
solidIndex++;
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(ExporterUtil.CreateLocalPlacement(file, localPlacement, null));
extrusionCreationData.ReuseLocalPlacement = true;
string openingGUID = CreateOpeningGUID(openingElem, range, openingIndex, solidIndex);
CreateOpening(exporterIFC, parentHandle, element, openingElem, openingGUID, solid, scaledWidth, openingData.IsRecess, extrusionCreationData,
setter, localWrapper);
}
}
foreach (IFCExtrusionData extrusionData in extrusionDataList)
{
solidIndex++;
if (extrusionData.ScaledExtrusionLength < MathUtil.Eps())
{
extrusionData.ScaledExtrusionLength = scaledWidth;
}
string openingGUID = CreateOpeningGUID(openingElem, range, openingIndex, solidIndex);
CreateOpening(exporterIFC, parentHandle, localPlacement, element, openingElem,
openingGUID, extrusionData, lcs, openingData.IsRecess, setter, localWrapper);
}
}
}
/// <summary>
/// Adds openings to an element.
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="elementHandles">The parent handles.</param>
/// <param name="curveLoops">The parent CurveLoops.</param>
/// <param name="element">The element.</param>
/// <param name="lcs">The local coordinate system.</param>
/// <param name="scaledWidth">The width.</param>
/// <param name="range">The range.</param>
/// <param name="setter">The placement setter.</param>
/// <param name="localPlacement">The local placement.</param>
/// <param name="localWrapper">The wrapper.</param>
public static void AddOpeningsToElement(ExporterIFC exporterIFC, IList <IFCAnyHandle> elementHandles,
IList <CurveLoop> curveLoops, Element element, Transform lcs, double scaledWidth,
IFCRange range, PlacementSetter setter, IFCAnyHandle localPlacement, ProductWrapper localWrapper)
{
IList <IFCOpeningData> openingDataList = ExporterIFCUtils.GetOpeningData(exporterIFC, element, lcs, range);
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
foreach (IFCOpeningData openingData in openingDataList)
{
Element openingElem = element.Document.GetElement(openingData.OpeningElementId);
if (openingElem == null)
{
openingElem = element;
}
bool currentWallIsHost = false;
FamilyInstance openingFInst = openingElem as FamilyInstance;
if (openingFInst != null && openingFInst.Host != null)
{
if (openingFInst.Host.Id == element.Id)
{
currentWallIsHost = true;
}
//continue; // If the host is not the current Wall, skip this opening
}
// Don't export the opening if WallSweep category has been turned off.
// This is currently restricted to WallSweeps because the element responsible for the opening could be a variety of things,
// including a line as part of the elevation profile of the wall.
// As such, we will restrict which element types we check for CanExportElement.
if ((openingElem is WallSweep) && (!ElementFilteringUtil.CanExportElement(exporterIFC, openingElem, true)))
{
continue;
}
IList <IFCExtrusionData> extrusionDataList = openingData.GetExtrusionData();
IFCAnyHandle parentHandle = null;
if (elementHandles.Count > 1 && extrusionDataList.Count > 0)
{
parentHandle = FindParentHandle(elementHandles, curveLoops, extrusionDataList[0].GetLoops()[0]);
}
if (parentHandle == null)
{
parentHandle = elementHandles[0];
}
string predefinedType;
IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, openingElem, out predefinedType);
bool exportingDoorOrWindow = (exportType.ExportInstance == IFCEntityType.IfcDoor ||
exportType.ExportType == IFCEntityType.IfcDoorType ||
exportType.ExportInstance == IFCEntityType.IfcWindow ||
exportType.ExportType == IFCEntityType.IfcWindowType);
bool isDoorOrWindowOpening = IsDoorOrWindowOpening(exporterIFC, openingElem, element);
bool insertHasHost = false;
bool insertInThisHost = false;
if (openingElem is FamilyInstance && element is Wall)
{
Element instHost = (openingElem as FamilyInstance).Host;
insertHasHost = (instHost != null);
insertInThisHost = (insertHasHost && instHost.Id == element.Id);
isDoorOrWindowOpening = insertInThisHost && exportingDoorOrWindow;
}
if (isDoorOrWindowOpening && currentWallIsHost)
{
DoorWindowDelayedOpeningCreator delayedCreator =
DoorWindowDelayedOpeningCreator.Create(exporterIFC, openingData, scaledWidth, element.Id, parentHandle, setter.LevelId);
if (delayedCreator != null)
{
ExporterCacheManager.DoorWindowDelayedOpeningCreatorCache.Add(delayedCreator);
continue;
}
}
// If the opening is "filled" by another element (either a door or window as
// determined above, or an embedded wall, then we can't use the element GUID
// for the opening.
bool canUseElementGUID = (!insertHasHost || insertInThisHost) &&
!isDoorOrWindowOpening && !(openingElem is Wall) &&
!exportingDoorOrWindow;
IList <Solid> solids = openingData.GetOpeningSolids();
foreach (Solid solid in solids)
{
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(ExporterUtil.CreateLocalPlacement(file, localPlacement, null));
extrusionCreationData.ReuseLocalPlacement = true;
string openingGUID = CreateOpeningGUID(openingElem, canUseElementGUID);
canUseElementGUID = false; // Either it was used above, and therefore is now false, or it was already false.
CreateOpening(exporterIFC, parentHandle, element, openingElem, openingGUID, solid, scaledWidth, openingData.IsRecess, extrusionCreationData,
setter, localWrapper);
}
}
foreach (IFCExtrusionData extrusionData in extrusionDataList)
{
if (extrusionData.ScaledExtrusionLength < MathUtil.Eps())
{
extrusionData.ScaledExtrusionLength = scaledWidth;
}
string openingGUID = CreateOpeningGUID(openingElem, canUseElementGUID);
canUseElementGUID = false; // Either it was used above, and therefore is now false, or it was already false.
CreateOpening(exporterIFC, parentHandle, localPlacement, element, openingElem, openingGUID, extrusionData, lcs, openingData.IsRecess,
setter, localWrapper);
}
}
}
