protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Set Data", "Set Data", "Sets Data from the RFEM Model.", Properties.Resources.icon_SetData);
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Nodal Loads", "NLoads", "Nodal Loads to set in the RFEM Model.", GH_ParamAccess.list);
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "Nodal Loads", "NLoads", "Nodal Loads from the RFEM Model.");
modelDataCount2 = evaluationUnit.Inputs.Count;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "Load Data");
gH_ExtendableMenu.Name = "Load Data";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < modelDataCount2; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
gH_ExtendableMenu.RegisterOutputPlug(evaluationUnit.Outputs[i]);
}
evaluationUnit.RegisterInputParam(new Param_String(), "Model Name", "Model Name", "Segment of the name of the RFEM Model to get information from", GH_ParamAccess.item);
evaluationUnit.Inputs[modelDataCount2].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "advanced");
gH_ExtendableMenu2.Name = "Advanced";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[modelDataCount2]);
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Member", "Member", "Creates a RFMember object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_Integer(), "LineNo", "LineNo", "Line Number", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_Integer(), "LineNo", "LineNo", "Line Number", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
// evaluationUnit.RegisterInputParam(new Param_String(), "Member Type", "Type", UtilLibrary.DescriptionRFTypes(typeof(MemberType)), GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Rotation Angle [°]", "β", "Rotation Angle [°]", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
//evaluationUnit.RegisterInputParam(new Param_Integer(), "Interpolated Points", "n", "Number of interpolated points for NURBS", GH_ParamAccess.item);
//evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Integer(), "End Cross-Section", "E CroSec", "Number of End Cross-Section", GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Integer(), "Start Hinge", "S Hinge", "Number of Start Hinge", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Integer(), "End Hinge", "E Hinge", "Number of End Hinge", GH_ParamAccess.item);
evaluationUnit.Inputs[5].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Integer(), "Eccentricity", "Ecc", "Number of Eccentricity", GH_ParamAccess.item);
evaluationUnit.Inputs[6].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Integer(), "Division", "Div", "Number of Division", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_Integer(), "Division", "Div", "Number of Division", GH_ParamAccess.item);
evaluationUnit.Inputs[7].Parameter.Optional = true;
// evaluationUnit.RegisterInputParam(new Param_String(), "Taper Shape", "Taper", UtilLibrary.DescriptionRFTypes(typeof(TaperShapeType)), GH_ParamAccess.item);
evaluationUnit.Inputs[8].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Member", "Member", "Member object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[9].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[10].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[11].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 9; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 9; i < 9 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Get Data", "Get Data", "Gets Data from the RFEM Model.", Properties.Resources.icon_GetData);
mngr.RegisterUnit(evaluationUnit);
//evaluationUnit.RegisterInputParam(new Param_Boolean(), "Nodes in RFEM Model", "Nodes", "Nodes to get from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
//evaluationUnit.RegisterInputParam(new Param_Boolean(), "Lines in RFEM Model", "Lines", "Lines to get from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
//evaluationUnit.RegisterInputParam(new Param_Boolean(), "Members in RFEM Model", "Members", "Members to get from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
//evaluationUnit.RegisterInputParam(new Param_Boolean(), "Surfaces in RFEM Model", "Surfaces", "Surfaces to get from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
//evaluationUnit.RegisterInputParam(new Param_Boolean(), "Openings in RFEM Model", "Openings", "Openings to get from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
//evaluationUnit.RegisterOutputParam(new Param_RFEM_GUI(), "Nodes", "Nodes", "Nodes from the RFEM Model.");
//modelDataCount1 = evaluationUnit.Inputs.Count;
//GH_ExtendableMenu gH_ExtendableMenu1 = new GH_ExtendableMenu(0, "model_data");
//gH_ExtendableMenu1.Name = "Model Data";
////gH_ExtendableMenu1.Collapse();
//evaluationUnit.AddMenu(gH_ExtendableMenu1);
//for (int i = 0; i < modelDataCount; i++)
//{
// gH_ExtendableMenu1.RegisterInputPlug(evaluationUnit.Inputs[i]);
//}
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Nodal Loads", "NLoads", "Nodal Loads from the RFEM Model.", GH_ParamAccess.item, new GH_Boolean(false));
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterOutputParam(new Param_RFEM(), "Nodal Loads", "NLoads", "Nodal Loads from the RFEM Model.");
modelDataCount2 = evaluationUnit.Inputs.Count;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "Load Data");
gH_ExtendableMenu.Name = "Load Data";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < modelDataCount2; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
gH_ExtendableMenu.RegisterOutputPlug(evaluationUnit.Outputs[i]);
}
evaluationUnit.RegisterInputParam(new Param_Filter(), "Filter", "Filter", "Filter RFEM Objects", GH_ParamAccess.list);
evaluationUnit.Inputs[modelDataCount2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_String(), "Model Name", "Model Name", "Segment of the name of the RFEM Model to get information from", GH_ParamAccess.item);
evaluationUnit.Inputs[modelDataCount2 + 1].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "advanced");
gH_ExtendableMenu2.Name = "Advanced";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = modelDataCount2; i < modelDataCount2 + 2; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_String(), "Surface List", "SrfcList", "Surface List", GH_ParamAccess.item);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Support Number", "No", "Optional index number to assign to the RFEM object.", GH_ParamAccess.item);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Displacement Dir X", "Tx", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m³]", GH_ParamAccess.item);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Displacement Dir Y", "Ty", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m³]", GH_ParamAccess.item);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Displacement Dir Z", "Tz", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m³]", GH_ParamAccess.item);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Comment", "Comment", "Comment.", GH_ParamAccess.item);
unit.Inputs[5].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu1 = new GH_ExtendableMenu(0, "nonlinieraity");
gH_ExtendableMenu1.Name = "Nonlinearity";
gH_ExtendableMenu1.Collapse();
unit.RegisterInputParam(new Param_Integer(), "SupportNonlinearityZ", "NTz", UtilLibrary.DescriptionRFTypes(typeof(NonlinearityType)), GH_ParamAccess.item);
unit.Inputs[6].EnumInput = UtilLibrary.ListRFTypes(typeof(NonlinearityType));
unit.Inputs[6].Parameter.Optional = true;
gH_ExtendableMenu1.RegisterInputPlug(unit.Inputs[6]);
unit.AddMenu(gH_ExtendableMenu1);
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(1, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Number(), "Shear Constant Dir XZ", "Vxz", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m³]", GH_ParamAccess.item);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Shear Constant Dir YZ", "Vyz", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m³]", GH_ParamAccess.item);
unit.Inputs[8].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[8]);
unit.AddMenu(gH_ExtendableMenu);
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(2, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
unit.RegisterInputParam(new Param_RFEM(), "RF Surface Support", "RF SrfcSup", "Support object from the RFEM model to modify", GH_ParamAccess.item);
unit.Inputs[9].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify object?", GH_ParamAccess.item);
unit.Inputs[10].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete object?", GH_ParamAccess.item);
unit.Inputs[11].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[9]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[10]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[11]);
unit.AddMenu(gH_ExtendableMenu2);
unit.RegisterOutputParam(new Param_RFEM(), "RF Surface Support", "RF SrfcSup", "Output RFSrfcSupport.");
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Cross Section", "CroSec", "Creates a RFCroSec object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_Number(), "AxialArea [m²]", "A", "AxialArea [m²]", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "ShearAreaY [m²]", "Ay", "ShearAreaY [m²]", GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "ShearAreaZ [m²]", "Az", "ShearAreaZ [m²]", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "BendingMomentY [m⁴]", "Iy", "BendingMomentY [m⁴]", GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "BendingMomentZ [m⁴]", "Iz", "BendingMomentZ [m⁴]", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "TorsionMoment [m⁴]", "Jt", "TorsionMoment [m⁴]", GH_ParamAccess.item);
evaluationUnit.Inputs[5].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Rotation Angle [°]", "β", "Rotation Angle [°]", GH_ParamAccess.item);
evaluationUnit.Inputs[6].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "TemperatureLoadWidth [m]", "TempW", "TemperatureLoadWidth [m]", GH_ParamAccess.item);
evaluationUnit.Inputs[7].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "TemperatureLoadDepth [m]", "TempD", "TemperatureLoadDepth [m]", GH_ParamAccess.item);
evaluationUnit.Inputs[8].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Cross Section", "CroSec", "Cross Section object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[9].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[10].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[11].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 9; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 9; i < 9 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_Line(), "Base Line", "Line", "Load Application Line.", GH_ParamAccess.item);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Load Case", "LC", "Load Case to assign the load to.", GH_ParamAccess.item);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Magnitude 1 [kN/m]", "F1", "Load Value [kN/m]", GH_ParamAccess.item);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Load Number", "No", "Optional index number to assign to the RFEM object.", GH_ParamAccess.item);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Comment", "Comment", "Comment.", GH_ParamAccess.item);
unit.Inputs[4].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_String(), "Surface List", "SfcList", "Surface List", GH_ParamAccess.item);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Magnitude 2 [kN/m]", "F2", "Load Value [kN/m]", GH_ParamAccess.item);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Load Direction Type", "Dir", UtilLibrary.DescriptionRFTypes(typeof(LoadDirectionType)), GH_ParamAccess.item);
unit.Inputs[7].EnumInput = UtilLibrary.ListRFTypes(typeof(LoadDirectionType));
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Load Distribution Type", "Dist", UtilLibrary.DescriptionRFTypes(typeof(LoadDistributionType)), GH_ParamAccess.item);
unit.Inputs[8].EnumInput = UtilLibrary.ListRFTypes(typeof(LoadDistributionType));
unit.Inputs[8].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "ProjectionPlane", "Proj", UtilLibrary.DescriptionRFTypes(typeof(PlaneType)), GH_ParamAccess.item);
unit.Inputs[9].EnumInput = UtilLibrary.ListRFTypes(typeof(PlaneType));
unit.Inputs[9].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[8]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[9]);
unit.AddMenu(gH_ExtendableMenu);
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
unit.RegisterInputParam(new Param_RFEM(), "RF Free Line Load", "RF FLLoad", "Load object from the RFEM model to modify", GH_ParamAccess.item);
unit.Inputs[10].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify object?", GH_ParamAccess.item);
unit.Inputs[11].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete object?", GH_ParamAccess.item);
unit.Inputs[12].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[10]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[11]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[12]);
unit.AddMenu(gH_ExtendableMenu2);
unit.RegisterOutputParam(new Param_RFEM(), "RF Free Line Load", "RF FLLoad", "Output RFLineLoad.");
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_Plane(), "Location", "Loc", "Point or Plane to assemble the RFSupport from.", GH_ParamAccess.item);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Support Number", "No", "Optional index number to assign to the RFEM object.", GH_ParamAccess.item);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Displacement Dir X", "Tx", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.item);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Displacement Dir Y", "Ty", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.item);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Displacement Dir Z", "Tz", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.item);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Rotation Dir X", "Rx", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.item);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Rotation Dir Y", "Ry", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.item);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Rotation Dir Z", "Rz", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.item);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Comment", "Comment", "Comment.", GH_ParamAccess.item);
unit.Inputs[8].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_String(), "Node List", "NodeList", "Node List", GH_ParamAccess.item);
unit.Inputs[9].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Rotation Sequence", "Seq", UtilLibrary.DescriptionRFTypes(typeof(RotationSequence)), GH_ParamAccess.item);
unit.Inputs[10].EnumInput = UtilLibrary.ListRFTypes(typeof(RotationSequence));
unit.Inputs[10].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Vector(), "Rotation Angles", "Rot", "Euler Angles [rad]", GH_ParamAccess.item);
unit.Inputs[11].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[9]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[10]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[11]);
unit.AddMenu(gH_ExtendableMenu);
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
unit.RegisterInputParam(new Param_RFEM(), "RF Nodal Support", "RF NodSup", "Support object from the RFEM model to modify", GH_ParamAccess.item);
unit.Inputs[12].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify object?", GH_ParamAccess.item);
unit.Inputs[13].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete object?", GH_ParamAccess.item);
unit.Inputs[14].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[12]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[13]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[14]);
unit.AddMenu(gH_ExtendableMenu2);
unit.RegisterOutputParam(new Param_RFEM(), "RF Nodal Support", "RF NodSup", "Output RFNodalSupport.");
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_Curve(), "Line", "Line", "Line or Curve to attach RFSupportL to.", GH_ParamAccess.item);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Hinge Number", "No", "Optional index number to assign to the RFEM object.", GH_ParamAccess.item);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Surface Number", "SfcNo", "Index number of the Surface to apply the hinge to.", GH_ParamAccess.item);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Displacement Dir X", "Tx", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.item);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Displacement Dir Y", "Ty", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.item);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Displacement Dir Z", "Tz", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.item);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Rotation Dir X", "Rx", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.item);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Rotation Dir Y", "Ry", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.item);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Rotation Dir Z", "Rz", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.item);
unit.Inputs[8].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Comment", "Comment", "Comment.", GH_ParamAccess.item);
unit.Inputs[9].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Integer(), "LineNo", "LineNo", "Line Index related to the Line Hinge", GH_ParamAccess.item);
unit.RegisterInputParam(new Param_Integer(), "LineNo", "LineNo", "Line Index related to the Line Hinge", GH_ParamAccess.item);
unit.Inputs[10].Parameter.Optional = true;
//unit.RegisterInputParam(new Param_Integer(), "Side", "Side", UtilLibrary.DescriptionRFTypes(typeof(HingeSideType)), GH_ParamAccess.item);
//unit.Inputs[11].EnumInput = UtilLibrary.ListRFTypes(typeof(HingeSideType));
unit.Inputs[11].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[10]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[11]);
unit.AddMenu(gH_ExtendableMenu);
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
unit.RegisterInputParam(new Param_RFEM(), "RF Line Hinge", "RF LineHinge", "Line Hinge object from the RFEM model to modify", GH_ParamAccess.item);
unit.Inputs[12].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify object?", GH_ParamAccess.item);
unit.Inputs[13].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete object?", GH_ParamAccess.item);
unit.Inputs[14].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[12]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[13]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[14]);
unit.AddMenu(gH_ExtendableMenu2);
unit.RegisterOutputParam(new Param_RFEM(), "RF Line Hinge", "RF LineHinge", "Output RFLineHinge.");
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_Surface(), "Surface", "Srfc", "Surface to assemble the RFSurface from.", GH_ParamAccess.item);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Surface Number", "No", "Optional index number to assign to the RFEM object.", GH_ParamAccess.item);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Material Number", "Mat", "Material index number.", GH_ParamAccess.item);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Thickness [m]", "H", "Surface thickness.", GH_ParamAccess.item);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Comment", "Comment", "Comment.", GH_ParamAccess.item);
unit.Inputs[4].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_String(), "Boundary Line List", "Bound", "Boundary Line List", GH_ParamAccess.item);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Surface Type", "Type", UtilLibrary.DescriptionRFTypes(typeof(SurfaceGeometryType)), GH_ParamAccess.item);
unit.Inputs[6].EnumInput = UtilLibrary.ListRFTypes(typeof(SurfaceGeometryType));
unit.Inputs[6].Parameter.Optional = true;
//unit.RegisterInputParam(new Param_Integer(), "Interpolated Points", "n", "Number of interpolated points for NURBS", GH_ParamAccess.item, new GH_Integer(4));
//unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Thickness Type", "Thick", UtilLibrary.DescriptionRFTypes(typeof(SurfaceThicknessType)), GH_ParamAccess.item);
unit.Inputs[7].EnumInput = UtilLibrary.ListRFTypes(typeof(SurfaceThicknessType));
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Stiffness Type", "Stiff", UtilLibrary.DescriptionRFTypes(typeof(SurfaceStiffnessType)), GH_ParamAccess.item);
unit.Inputs[8].EnumInput = UtilLibrary.ListRFTypes(typeof(SurfaceStiffnessType));
unit.Inputs[8].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[8]);
unit.AddMenu(gH_ExtendableMenu);
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
unit.RegisterInputParam(new Param_RFEM(), "RF Surface", "RF Surface", "Surface object from the RFEM model to modify", GH_ParamAccess.item);
unit.Inputs[9].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify object?", GH_ParamAccess.item);
unit.Inputs[10].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete object?", GH_ParamAccess.item);
unit.Inputs[11].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[9]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[10]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[11]);
unit.AddMenu(gH_ExtendableMenu2);
unit.RegisterOutputParam(new Param_RFEM(), "RF Surface", "RF Surface", "Output RFSurface.");
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_Integer(), "Release Number", "No", "Optional index number to assign to the RFEM object.", GH_ParamAccess.item);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Node Number", "Node", "Index Number of the node to assign the release to.", GH_ParamAccess.item);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Member List", "Members", "List of released members", GH_ParamAccess.item);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Hinge Number", "Hinge", "Nomber of member hinge to import properties from", GH_ParamAccess.item);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Member Number", "Member", "Member (or line) number to get the axis system from", GH_ParamAccess.item);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Comment", "Comment", "Comment.", GH_ParamAccess.item);
unit.Inputs[5].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Integer(), "Axis System", "Axis", UtilLibrary.DescriptionRFTypes(typeof(NodalReleaseAxisSystem)), GH_ParamAccess.item);
unit.Inputs[6].EnumInput = UtilLibrary.ListRFTypes(typeof(NodalReleaseAxisSystem));
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Surface List", "Sfcs", "List of released surfaces", GH_ParamAccess.item);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Solid List", "Solids", "List of released solids", GH_ParamAccess.item);
unit.Inputs[8].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Release Location", "Location", UtilLibrary.DescriptionRFTypes(typeof(ReleaseLocation)), GH_ParamAccess.item);
unit.Inputs[9].EnumInput = UtilLibrary.ListRFTypes(typeof(ReleaseLocation));
unit.Inputs[9].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[8]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[9]);
unit.AddMenu(gH_ExtendableMenu);
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
unit.RegisterInputParam(new Param_RFEM(), "RF Nodal Release", "RF NodalRelease", "Nodal Release object from the RFEM model to modify", GH_ParamAccess.item);
unit.Inputs[10].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify object?", GH_ParamAccess.item);
unit.Inputs[11].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete object?", GH_ParamAccess.item);
unit.Inputs[12].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[10]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[11]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[12]);
unit.AddMenu(gH_ExtendableMenu2);
unit.RegisterOutputParam(new Param_RFEM(), "RF Nodal Release", "RF NodalRelease", "Output RFNodalRelease.");
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_String(), "Description", "Desc", "Name or Description of Cross Section.", GH_ParamAccess.item);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Material Number", "No", "Optional index number to assign to the RFEM object.", GH_ParamAccess.item);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Comment", "Comment", "Comment.", GH_ParamAccess.item);
unit.Inputs[2].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Number(), "Elasticity Modulus [N/m²]", "E", "Elasticity Modulus [N/m²]", GH_ParamAccess.item);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Poisson Ratio", "Mu", "Poisson Ratio", GH_ParamAccess.item);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Shear Modulus [N/m²]", "G", "Shear Modulus [N/m²]", GH_ParamAccess.item);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Specific Weight [N/m³]", "W", "Specific Weight [N/m³]", GH_ParamAccess.item);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Thermal Expansion [1/°]", "Alpha", "Thermal Expansion [1/°]", GH_ParamAccess.item);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Partial Safety Factor", "Gamma", "Partial Safety Factor", GH_ParamAccess.item);
unit.Inputs[8].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[8]);
unit.AddMenu(gH_ExtendableMenu);
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
unit.RegisterInputParam(new Param_RFEM(), "RF Material", "RF Mat", "Material object from the RFEM model to modify", GH_ParamAccess.item);
unit.Inputs[9].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify object?", GH_ParamAccess.item);
unit.Inputs[10].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete object?", GH_ParamAccess.item);
unit.Inputs[11].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[9]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[10]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[11]);
unit.AddMenu(gH_ExtendableMenu2);
unit.RegisterOutputParam(new Param_RFEM(), "RF Material", "RF Mat", "Output RFMaterial.");
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Material", "Mat", "Creates a RFMaterial object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_Number(), "Elasticity Modulus [N/m²]", "E", "Elasticity Modulus [N/m²]", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Poisson Ratio", "Mu", "Poisson Ratio", GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Shear Modulus [N/m²]", "G", "Shear Modulus [N/m²]", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Specific Weight [N/m³]", "W", "Specific Weight [N/m³]", GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Thermal Expansion [1/°]", "Alpha", "Thermal Expansion [1/°]", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Number(), "Partial Safety Factor", "Gamma", "Partial Safety Factor", GH_ParamAccess.item);
evaluationUnit.Inputs[5].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Material", "Mat", "Material object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[6].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[7].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[8].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 6; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 6; i < 6 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Surface", "Srfc", "Creates a RFLine object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_String(), "Boundary Line List", "Bound", "Boundary Line List", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_String(), "Boundary Line List", "Bound", "Boundary Line List", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_String(), "Boundary Line List", "Bound", "Boundary Line List", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_String(), "Boundary Line List", "Bound", "Boundary Line List", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
//evaluationUnit.RegisterInputParam(new Param_String(), "Surface Type", "Type", UtilLibrary.DescriptionRFTypes(typeof(SurfaceGeometryType)), GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
//evaluationUnit.RegisterInputParam(new Param_Integer(), "Interpolated Points", "n", "Number of interpolated points for NURBS", GH_ParamAccess.item, new GH_Integer(4));
//evaluationUnit.Inputs[2].Parameter.Optional = true;
// evaluationUnit.RegisterInputParam(new Param_String(), "Thickness Type", "Th Type", UtilLibrary.DescriptionRFTypes(typeof(SurfaceThicknessType)), GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
//evaluationUnit.RegisterInputParam(new Param_String(), "Stiffness Type", "St Type", UtilLibrary.DescriptionRFTypes(typeof(SurfaceStiffnessType)), GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Surface", "Srfc", "Surface object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[5].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[6].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 4; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 4; i < 4 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected void Setup(EvaluationUnit unit)
{
string str = "\ndouble-click on the knob to set the value range.";
string str2 = " the number of mesh faces over a beams cross section that are used for rendering.";
MenuPanel menupanel = new MenuPanel(0, "render_panel");
GH_ExtendableMenu gh_extendablemenu = new GH_ExtendableMenu(1, "render_menu");
menupanel.ShowToolTip = true;
gh_extendablemenu.Name = "render settings";
gh_extendablemenu.Header = "Set properties to be rendered on the beams.";
gh_extendablemenu.Expand();
MenuStaticText menuStaticText = new MenuStaticText();
menuStaticText.Text = "Length/Segment [m]";
menuStaticText.Header = "Controls the length [m]" + " of segments of rendered beams.\n" + str;
menupanel.AddControl(menuStaticText);
_nFacSlider = new MenuSlider(1, "slider_nfac", 0.05, 5.0, 1.0, 2);
_nFacSlider.ValueChanged += _nFacSlider__valueChanged;
_nFacSlider.Header = "sets" + str2 + str;
menupanel.AddControl(_nFacSlider);
gh_extendablemenu.AddControl(menupanel);
unit.AddMenu(gh_extendablemenu);
unit.RegisterOutputParam(new Param_Brep(), "Extrussions", "E", "Extruded members.");
}
protected void Setup(EvaluationUnit unit)
{
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "menu_settings");
gH_ExtendableMenu.Name = "Advanced Options";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Interval(), "X [m]", "X", "X Coordinate", GH_ParamAccess.list);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Y [m]", "Y", "Y Coordinate", GH_ParamAccess.list);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Z [m]", "Z", "Z Coordinate", GH_ParamAccess.list);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Line Type", "L Type", "Line Type", GH_ParamAccess.list);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Rotation Type", "Rot Type", "Rotation Type", GH_ParamAccess.list);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Rotation Angle [°]", "β", "Rotation Angle", GH_ParamAccess.list);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Nodes No", "Nodes", "Nodes No", GH_ParamAccess.list);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Length [m]", "L", "Line Length", GH_ParamAccess.list);
unit.Inputs[7].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[0]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[1]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[2]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
unit.AddMenu(gH_ExtendableMenu);
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_Point(), "Point Coordinates [m]", "Point", "Point Coordinates [m] to assemble the RFNode from.", GH_ParamAccess.item);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Node Number", "No", "Optional index number to assign to the RFEM object.", GH_ParamAccess.item);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Comment", "Comment", "Comment.", GH_ParamAccess.item);
unit.Inputs[2].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(0, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
unit.RegisterInputParam(new Param_RFEM(), "RF Node", "RF Node", "Node object from the RFEM model to modify", GH_ParamAccess.item);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify object?", GH_ParamAccess.item);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete object?", GH_ParamAccess.item);
unit.Inputs[5].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[5]);
unit.AddMenu(gH_ExtendableMenu2);
unit.RegisterOutputParam(new Param_RFEM(), "RF Node", "RF Node", "Output RFNode.");
}
protected void Setup(EvaluationUnit unit)
{
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "menu_settings");
gH_ExtendableMenu.Name = "Advanced Options";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_String(), "Node Number", "Node", "Node the release is attached to", GH_ParamAccess.list);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Member List", "Members", "List of released members", GH_ParamAccess.list);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Surface List", "Sfcs", "List of released surfaces", GH_ParamAccess.list);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Solid List", "Solids", "List of released solids", GH_ParamAccess.list);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Hinge Number", "Hinge", "Nomber of member hinge to import properties from", GH_ParamAccess.list);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Member Number", "Member", "Member (or line) number to get the axis system from", GH_ParamAccess.list);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Axis System", "Axis", "Axis System", GH_ParamAccess.list);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Release Location", "Location", "Location", GH_ParamAccess.list);
unit.Inputs[7].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[0]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[1]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[2]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
unit.AddMenu(gH_ExtendableMenu);
}
protected void Setup(EvaluationUnit unit)
{
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "menu_settings");
gH_ExtendableMenu.Name = "Advanced Options";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Interval(), "Displacement Dir X", "Tx", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.list);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Displacement Dir Y", "Ty", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.list);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Displacement Dir Z", "Tz", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.list);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Rotation Dir X", "Rx", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.list);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Rotation Dir Y", "Ry", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.list);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Rotation Dir Z", "Rz", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.list);
unit.Inputs[5].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[0]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[1]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[2]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
unit.AddMenu(gH_ExtendableMenu);
}
protected void Setup(EvaluationUnit unit)
{
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "menu_settings");
gH_ExtendableMenu.Name = "Advanced Options";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Interval(), "X [m]", "X", "X Coordinate", GH_ParamAccess.list);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Y [m]", "Y", "Y Coordinate", GH_ParamAccess.list);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Z [m]", "Z", "Z Coordinate", GH_ParamAccess.list);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Boundary Lines", "Bound", "Number of Boundary Lines", GH_ParamAccess.list);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "In Surface No", "Srfc", "In Surface No", GH_ParamAccess.list);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Area [m²]", "A", "Opening Area", GH_ParamAccess.list);
unit.Inputs[5].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[0]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[1]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[2]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
unit.AddMenu(gH_ExtendableMenu);
}
protected void Setup(EvaluationUnit unit)
{
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "menu_settings");
gH_ExtendableMenu.Name = "Advanced Options";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Interval(), "X [m]", "X", "X Coordinate", GH_ParamAccess.list);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Y [m]", "Y", "Y Coordinate", GH_ParamAccess.list);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Z [m]", "Z", "Z Coordinate", GH_ParamAccess.list);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Surfaces No", "Surfaces", "Sfcs No", GH_ParamAccess.list);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Displacement Dir X", "Tx", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.list);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Displacement Dir Y", "Ty", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.list);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Displacement Dir Z", "Tz", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.list);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Shear Constant Dir XZ", "Vxz", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m³]", GH_ParamAccess.list);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Shear Constant Dir YZ", "Vyz", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m³]", GH_ParamAccess.list);
unit.Inputs[8].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[0]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[1]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[2]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[8]);
unit.AddMenu(gH_ExtendableMenu);
}
protected void Setup(EvaluationUnit unit)
{
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "menu_settings");
gH_ExtendableMenu.Name = "Advanced Options";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_String(), "Description", "Description", "Description of Load Case.", GH_ParamAccess.list);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Action Category", "Action", "Action Category Type.", GH_ParamAccess.list);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Self Weight Factor X", "SWx", "Self Weight Factor in X direction.", GH_ParamAccess.list);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Self Weight Factor Y", "SWy", "Self Weight Factor in Y direction.", GH_ParamAccess.list);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Self Weight Factor Z", "SWz", "Self Weight Factor in Z direction.", GH_ParamAccess.list);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "To Solve", "Solve", "Solve Load Case?", GH_ParamAccess.list);
unit.Inputs[5].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[0]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[1]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[2]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
unit.AddMenu(gH_ExtendableMenu);
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_RFEM(), "RF Surface", "RF Surface", "Input RFSurface.", GH_ParamAccess.item);
// unit.Inputs[0].Parameter.Optional = true;
unit.RegisterOutputParam(new Param_Surface(), "Surface", "Srfc", "Surface related to the RFSurface object.");
unit.RegisterOutputParam(new Param_Integer(), "Surface Number", "No", "Index number of the RFEM object.");
unit.RegisterOutputParam(new Param_Integer(), "Material Number", "Mat", "Material index number.");
unit.RegisterOutputParam(new Param_Number(), "Thickness [m]", "H", "Surface thickness.");
unit.RegisterOutputParam(new Param_String(), "Comment", "Comment", "Comment.");
unit.RegisterOutputParam(new Param_String(), "Boundary Lines List", "BoundList", "List of index numbers of boundary lines");
unit.RegisterOutputParam(new Param_String(), "Geometry Type", "GType", "Geometry Type");
unit.RegisterOutputParam(new Param_String(), "Thickness Type", "ThType", "Thickness Type");
unit.RegisterOutputParam(new Param_String(), "Stiffness Type", "SType", "Stiffness Type");
unit.RegisterOutputParam(new Param_Number(), "Eccentricty [m]", "Ecc", "Surface eccentricity [m]");
unit.RegisterOutputParam(new Param_Number(), "Area [m²]", "A", "Surface area");
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Surface Axes";
gH_ExtendableMenu.Collapse();
unit.RegisterOutputParam(new Param_Plane(), "Axes", "Axes", "Axes Coordinate System");
unit.RegisterOutputParam(new Param_String(), "Direction", "Dir", "Axes Direction");
unit.RegisterOutputParam(new Param_String(), "Line Index", "Line", "Line Index");
unit.RegisterOutputParam(new Param_Number(), "Rotation [rad]", "Rot", "Angular rotation [rad]");
gH_ExtendableMenu.RegisterOutputPlug(unit.Outputs[11]);
gH_ExtendableMenu.RegisterOutputPlug(unit.Outputs[12]);
gH_ExtendableMenu.RegisterOutputPlug(unit.Outputs[13]);
gH_ExtendableMenu.RegisterOutputPlug(unit.Outputs[14]);
unit.AddMenu(gH_ExtendableMenu);
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_Point(), "Location", "Loc", "Load Application point.", GH_ParamAccess.item);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Load Case", "LC", "Load Case to assign the load to.", GH_ParamAccess.item);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Vector(), "Force [kN]", "F", "Load Force [kN]", GH_ParamAccess.item);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Vector(), "Moment [kNm]", "M", "Load Moment [kN]", GH_ParamAccess.item);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Load Number", "No", "Optional index number to assign to the RFEM object.", GH_ParamAccess.item);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Comment", "Comment", "Comment.", GH_ParamAccess.item);
unit.Inputs[5].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_String(), "Node List", "NodeList", "Node List", GH_ParamAccess.item);
unit.Inputs[6].Parameter.Optional = true;
//unit.RegisterInputParam(new Param_Integer(), "LoadDefinitionType", "Def", UtilLibrary.DescriptionRFTypes(typeof(LoadDefinitionType)), GH_ParamAccess.item);
//unit.Inputs[7].EnumInput = UtilLibrary.ListRFTypes(typeof(LoadDefinitionType));
//unit.Inputs[7].Parameter.Optional = true;
//gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
//gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
unit.AddMenu(gH_ExtendableMenu);
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
unit.RegisterInputParam(new Param_RFEM(), "RF Nodal Load", "RF NLoad", "Load object from the RFEM model to modify", GH_ParamAccess.item);
unit.Inputs[8].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify object?", GH_ParamAccess.item);
unit.Inputs[9].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete object?", GH_ParamAccess.item);
unit.Inputs[10].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[8]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[9]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[10]);
unit.AddMenu(gH_ExtendableMenu2);
unit.RegisterOutputParam(new Param_RFEM(), "RF Nodal Load", "RF NLoad", "Output RFNodalLoad.");
}
protected void Setup(EvaluationUnit unit)
{
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "menu_settings");
gH_ExtendableMenu.Name = "Advanced Options";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_String(), "Load Cases", "LC", "Load Cases", GH_ParamAccess.list);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Lines No", "Lines", "Lines No", GH_ParamAccess.list);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "F1 [kN/m]", "F1", "F1 [kN/m]", GH_ParamAccess.list);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "F2 [kN/m]", "F2", "F2 [kN/m]", GH_ParamAccess.list);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "F3 [kN/m]", "F3", "F3 [kN/m]", GH_ParamAccess.list);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Distance A", "t1", "Distance A", GH_ParamAccess.list);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Distance B", "t2", "Distance B", GH_ParamAccess.list);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Load Type", "Type", "Load Type", GH_ParamAccess.list);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Load Direction Type", "Dir", "Load Direction Type", GH_ParamAccess.list);
unit.Inputs[8].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Load Distribution Type", "Dist", "Load Distribution Type", GH_ParamAccess.list);
unit.Inputs[9].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Line Load Reference Type", "RefType", "LLine Load Reference Type", GH_ParamAccess.list);
unit.Inputs[10].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Over Total Length", "Total", "Over Total Length", GH_ParamAccess.list);
unit.Inputs[11].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Relative Distances", "Rel", "Relative Distances", GH_ParamAccess.list);
unit.Inputs[12].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "X [m]", "X", "X Coordinate", GH_ParamAccess.list);
unit.Inputs[13].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Y [m]", "Y", "Y Coordinate", GH_ParamAccess.list);
unit.Inputs[14].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Z [m]", "Z", "Z Coordinate", GH_ParamAccess.list);
unit.Inputs[15].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[0]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[1]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[2]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[8]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[9]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[10]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[11]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[12]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[13]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[14]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[15]);
unit.AddMenu(gH_ExtendableMenu);
}
protected void Setup(EvaluationUnit unit)
{
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "menu_settings");
gH_ExtendableMenu.Name = "Advanced Options";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Interval(), "X [m]", "X", "X Coordinate", GH_ParamAccess.list);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Y [m]", "Y", "Y Coordinate", GH_ParamAccess.list);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Z [m]", "Z", "Z Coordinate", GH_ParamAccess.list);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Nodes No", "Nodes", "Nodes No", GH_ParamAccess.list);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Displacement Dir X", "Tx", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.list);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Displacement Dir Y", "Ty", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.list);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Displacement Dir Z", "Tz", "(-1): Fixed; (0): Free; Other: Stiffness in [kN/m]", GH_ParamAccess.list);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Rotation Dir X", "Rx", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.list);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Rotation Dir Y", "Ry", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.list);
unit.Inputs[8].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Rotation Dir Z", "Rz", "(-1): Fixed; (0): Free; Other: Stiffness in [kNm/rad]", GH_ParamAccess.list);
unit.Inputs[9].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "SupportNonlinearityX", "NTx", "Nonlinearity Tpye Displacement Dir X", GH_ParamAccess.list);
unit.Inputs[10].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "SupportNonlinearityY", "NTy", "Nonlinearity Tpye Displacement Dir Y", GH_ParamAccess.list);
unit.Inputs[11].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "SupportNonlinearityZ", "NTz", "Nonlinearity Tpye Displacement Dir Z", GH_ParamAccess.list);
unit.Inputs[12].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "RestraintNonlinearityX", "NRx", "Nonlinearity Tpye Rotation Dir X", GH_ParamAccess.list);
unit.Inputs[13].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "RestraintNonlinearityY", "NRy", "Nonlinearity Tpye Rotation Dir Y", GH_ParamAccess.list);
unit.Inputs[14].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "RestraintNonlinearityZ", "NRz", "Nonlinearity Tpye Rotation Dir Z", GH_ParamAccess.list);
unit.Inputs[15].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[0]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[1]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[2]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[8]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[9]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[10]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[11]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[12]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[13]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[14]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[15]);
unit.AddMenu(gH_ExtendableMenu);
}
protected void Setup(EvaluationUnit unit)
{
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "menu_settings");
gH_ExtendableMenu.Name = "Advanced Options";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Interval(), "X [m]", "X", "X Coordinate", GH_ParamAccess.list);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Y [m]", "Y", "Y Coordinate", GH_ParamAccess.list);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Z [m]", "Z", "Z Coordinate", GH_ParamAccess.list);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Member Type", "M Type", "Member Type", GH_ParamAccess.list);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Line No", "Line", "Line No", GH_ParamAccess.list);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Start Cross-Section", "S CroSec", "Number of Start Cross-Section", GH_ParamAccess.list);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "End Cross-Section", "E CroSec", "Number of End Cross-Section", GH_ParamAccess.list);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Rotation Type", "Rot Type", "Rotation Type", GH_ParamAccess.list);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Rotation Angle [°]", "β", "Rotation Angle", GH_ParamAccess.list);
unit.Inputs[8].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Start Hinge", "S Hinge", "Number of Start Hinge", GH_ParamAccess.list);
unit.Inputs[9].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "End Hinge", "E Hinge", "Number of End Hinge", GH_ParamAccess.list);
unit.Inputs[10].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Eccentricity", "Ecc", "Number of Eccentricity", GH_ParamAccess.list);
unit.Inputs[11].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Division", "Div", "Number of Division", GH_ParamAccess.list);
unit.Inputs[12].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Taper Shape", "Taper", "Taper Shape", GH_ParamAccess.list);
unit.Inputs[13].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Length [m]", "L", "Member Length", GH_ParamAccess.list);
unit.Inputs[14].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Weight [kg]", "W", "Member Weight", GH_ParamAccess.list);
unit.Inputs[15].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[0]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[1]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[2]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[8]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[9]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[10]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[11]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[12]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[13]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[14]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[15]);
unit.AddMenu(gH_ExtendableMenu);
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_Curve(), "Line", "Line", "Line or Curve to assemble the RFLine from.", GH_ParamAccess.item);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Line Number", "No", "Optional index number to assign to the RFEM object.", GH_ParamAccess.item);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Comment", "Comment", "Comment.", GH_ParamAccess.item);
unit.Inputs[2].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_String(), "NodeList", "NodeList", "Node List", GH_ParamAccess.item);
unit.RegisterInputParam(new Param_String(), "NodeList", "NodeList", "Node List", GH_ParamAccess.item);
unit.Inputs[3].Parameter.Optional = true;
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Number(), "Rotation Angle [°]", "β", "Rotation Angle [°]", GH_ParamAccess.item);
unit.Inputs[5].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
unit.AddMenu(gH_ExtendableMenu);
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
unit.RegisterInputParam(new Param_RFEM(), "RF Line", "RF Line", "Line object from the RFEM model to modify", GH_ParamAccess.item);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify object?", GH_ParamAccess.item);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete object?", GH_ParamAccess.item);
unit.Inputs[8].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[8]);
unit.AddMenu(gH_ExtendableMenu2);
unit.RegisterOutputParam(new Param_RFEM(), "RF Line", "RF Line", "Output RFNode.");
}
protected override void RegisterEvaluationUnits(EvaluationUnitManager mngr)
{
EvaluationUnit evaluationUnit = new EvaluationUnit("Assemble Nodal Support", "NodSup", "Creates a RFSupportP object to define new data or modify existing data " +
"in the RFEM model.");
mngr.RegisterUnit(evaluationUnit);
evaluationUnit.RegisterInputParam(new Param_String(), "Node List", "NodeList", "Node List", GH_ParamAccess.item);
evaluationUnit.RegisterInputParam(new Param_String(), "Node List", "NodeList", "Node List", GH_ParamAccess.item);
evaluationUnit.Inputs[0].Parameter.Optional = true;
//evaluationUnit.RegisterInputParam(new Param_String(), "Rotation Sequence", "Seq", UtilLibrary.DescriptionRFTypes(typeof(RotationSequence)), GH_ParamAccess.item);
evaluationUnit.Inputs[1].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Point(), "Rotation Angles", "Rot", "Euler Angles [rad]", GH_ParamAccess.item);
evaluationUnit.Inputs[2].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_RFEM(), "Nodal Support", "NodSup", "Support object from the RFEM model to modify", GH_ParamAccess.item);
evaluationUnit.Inputs[3].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify node?", GH_ParamAccess.item);
evaluationUnit.Inputs[4].Parameter.Optional = true;
evaluationUnit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete node?", GH_ParamAccess.item);
evaluationUnit.Inputs[5].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu);
for (int i = 0; i < 3; i++)
{
gH_ExtendableMenu.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
evaluationUnit.AddMenu(gH_ExtendableMenu2);
for (int i = 3; i < 3 + 3; i++)
{
gH_ExtendableMenu2.RegisterInputPlug(evaluationUnit.Inputs[i]);
}
}
protected void Setup(EvaluationUnit unit)
{
unit.RegisterInputParam(new Param_Integer(), "Load Case Number", "No", "Optional index number to assign to the RFEM object.", GH_ParamAccess.item);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Description", "Description", "Description of Load Case.", GH_ParamAccess.item);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Integer(), "Action Category", "Action", UtilLibrary.DescriptionRFTypes(typeof(ActionCategoryType)), GH_ParamAccess.item);
unit.Inputs[2].EnumInput = UtilLibrary.ListRFTypes(typeof(ActionCategoryType));
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Comment", "Comment", "Comment.", GH_ParamAccess.item);
unit.Inputs[3].Parameter.Optional = true;
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "advanced");
gH_ExtendableMenu.Name = "Advanced";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Vector(), "Self Weight Factor", "Self Weight", "Self Weight Factor", GH_ParamAccess.item);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "To Solve", "Solve", "Solve Load Case?", GH_ParamAccess.item);
unit.Inputs[5].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
unit.AddMenu(gH_ExtendableMenu);
GH_ExtendableMenu gH_ExtendableMenu2 = new GH_ExtendableMenu(1, "modify");
gH_ExtendableMenu2.Name = "Modify";
gH_ExtendableMenu2.Collapse();
unit.RegisterInputParam(new Param_RFEM(), "RF Load Case", "RF LoadCase", "Load object from the RFEM model to modify", GH_ParamAccess.item);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Modify", "Modify", "Modify object?", GH_ParamAccess.item);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Boolean(), "Delete", "Delete", "Delete object?", GH_ParamAccess.item);
unit.Inputs[8].Parameter.Optional = true;
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu2.RegisterInputPlug(unit.Inputs[8]);
unit.AddMenu(gH_ExtendableMenu2);
unit.RegisterOutputParam(new Param_RFEM(), "RF Load Case", "RF LoadCase", "Output RFLoadCase.");
}
protected void Setup(EvaluationUnit unit)
{
GH_ExtendableMenu gH_ExtendableMenu = new GH_ExtendableMenu(0, "menu_settings");
gH_ExtendableMenu.Name = "Advanced Options";
gH_ExtendableMenu.Collapse();
unit.RegisterInputParam(new Param_Interval(), "X [m]", "X", "X Coordinate", GH_ParamAccess.list);
unit.Inputs[0].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Y [m]", "Y", "Y Coordinate", GH_ParamAccess.list);
unit.Inputs[1].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Z [m]", "Z", "Z Coordinate", GH_ParamAccess.list);
unit.Inputs[2].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Surface Type", "Type", "Surface Type", GH_ParamAccess.list);
unit.Inputs[3].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Stiffness Type", "Stiff", "Stiffness Type", GH_ParamAccess.list);
unit.Inputs[4].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Boundary Lines", "Bound", "Number of Boundary Lines", GH_ParamAccess.list);
unit.Inputs[5].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Material No", "Mat", "Number of Material", GH_ParamAccess.list);
unit.Inputs[6].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Thickness Type", "Thick", "Thickness Type", GH_ParamAccess.list);
unit.Inputs[7].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Thickness [mm]", "d", "Thickness Type", GH_ParamAccess.list);
unit.Inputs[8].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Eccentricity [mm]", "Ecc", "Eccentricity", GH_ParamAccess.list);
unit.Inputs[9].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Integrated Nodes No", "I Nodes", "Number of Integrated Nodes", GH_ParamAccess.list);
unit.Inputs[10].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Integrated Lines No", "I Lines", "Number of Integrated Lines", GH_ParamAccess.list);
unit.Inputs[11].Parameter.Optional = true;
unit.RegisterInputParam(new Param_String(), "Integrated Openings No", "I Op", "Number of Integrated Openings", GH_ParamAccess.list);
unit.Inputs[12].Parameter.Optional = true;
unit.RegisterInputParam(new Param_Interval(), "Area [m²]", "A", "Surface Area", GH_ParamAccess.list);
unit.Inputs[13].Parameter.Optional = true;
//unit.RegisterInputParam(new Param_Interval(), "Weight [kg]", "W", "Surface Weight", GH_ParamAccess.list);
//unit.Inputs[14].Parameter.Optional = true;
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[0]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[1]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[2]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[3]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[4]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[5]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[6]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[7]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[8]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[9]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[10]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[11]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[12]);
gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[13]);
//gH_ExtendableMenu.RegisterInputPlug(unit.Inputs[14]);
unit.AddMenu(gH_ExtendableMenu);
}