/// <summary>
/// Remove all of the edges and vertices from the graph.
/// </summary>
public virtual void Clear()
{
VertexOutEdges.Clear();
m_Edges.Clear();
}
private void ButtonBuild_Click(object sender, EventArgs e)
{
if (FalseWrite)
{
MessageBox.Show("Неправильно заданы входные параметры\nИсправьте красные поля");
return;
}
string docName = "Первая деталь";
CreateDoc(docName);
// Создание эскиза на YX
PlanarSketch Sketch = CompDef[docName].Sketches.Add(CompDef[docName].WorkPlanes[3]); // 1 - YZ ; 2 - ZX; 3 - XY
// Создание массивов Точек, Линий, Дуг, Окружностей
List <SketchPoint> points = new List <SketchPoint>(); // Точки
List <SketchLine> lines = new List <SketchLine>(); // Линии
List <SketchArc> arcs = new List <SketchArc>(); // Дуги
List <SketchCircle> circles = new List <SketchCircle>(); // Окружности
/////////////////////////////////////////////////////////// Выдавливание
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(0, 0), false));
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(0, 5.0 / 10), false));
lines.Add(Sketch.SketchLines.AddByTwoPoints(points[points.Count - 2], points[points.Count - 1]));
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(0, 10.0 / 10), false));
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(0, 15.0 / 10), false));
arcs.Add(Sketch.SketchArcs.AddByCenterStartEndPoint(points[points.Count - 2], points[points.Count - 3], points[points.Count - 1], true));
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(0, 20.0 / 10), false));
lines.Add(Sketch.SketchLines.AddByTwoPoints(points[points.Count - 2], points[points.Count - 1]));
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(20.0 / 10, 20.0 / 10), false));
lines.Add(Sketch.SketchLines.AddByTwoPoints(points[points.Count - 2], points[points.Count - 1]));
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(20.0 / 10, 0), false));
lines.Add(Sketch.SketchLines.AddByTwoPoints(points[points.Count - 2], points[points.Count - 1]));
lines.Add(Sketch.SketchLines.AddByTwoPoints(points[0], points[points.Count - 1]));
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(10.0 / 10, 10.0 / 10), false));
circles.Add(Sketch.SketchCircles.AddByCenterRadius(points[points.Count - 1], 4.0 / 10));
Profile ProfileMain = (Profile)Sketch.Profiles.AddForSolid();
ExtrudeFeature ExtrudeDef = CompDef[docName].Features.ExtrudeFeatures.AddByDistanceExtent(
/*Эскиз*/ ProfileMain,
/*Длина в см*/ 10.0 / 10,
/*Направление вдоль оси*/ PartFeatureExtentDirectionEnum.kPositiveExtentDirection,
/*Операция*/ PartFeatureOperationEnum.kJoinOperation,
/*Эскиз*/ ProfileMain);
/////////////////////////////////////////////////////////// Вращение
WorkPlane WorkinPlace = CompDef[docName].WorkPlanes.AddByPlaneAndOffset(
CompDef[docName].WorkPlanes[2], 20.0 / 10);
WorkinPlace.Visible = false;
Sketch = CompDef[docName].Sketches.Add(WorkinPlace);
SketchLine line_axis;
points.Clear();
lines.Clear();
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(-(10.0 - 5) / 10, 0), false));
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(-(10.0 - 5) / 10, 10.0 / 10), false));
lines.Add(Sketch.SketchLines.AddByTwoPoints(points[points.Count - 2], points[points.Count - 1]));
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(-10.0 / 10, 10.0 / 10), false));
lines.Add(Sketch.SketchLines.AddByTwoPoints(points[points.Count - 2], points[points.Count - 1]));
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(-10.0 / 10, 0), false));
line_axis = Sketch.SketchLines.AddByTwoPoints(points[points.Count - 2], points[points.Count - 1]);
lines.Add(Sketch.SketchLines.AddByTwoPoints(points[0], points[points.Count - 1]));
Profile ProfileExternal = (Profile)Sketch.Profiles.AddForSolid();
RevolveFeature revolvefeature = CompDef[docName].Features.RevolveFeatures.AddFull(
ProfileExternal,
line_axis,
PartFeatureOperationEnum.kCutOperation);
Trans[docName].End();
/////////////////////////////////////////////////////////// Вторая деталь
docName = "Вторая деталь";
CreateDoc(docName);
Sketch = CompDef[docName].Sketches.Add(CompDef[docName].WorkPlanes[3]);
points.Clear();
lines.Clear();
///////////////////////////////////////////////// Шестиугольник
double R = 2 * (4.0 / 10) / Math.Sqrt(3), Angle;
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(
1.65 * Math.Cos(((double)210 / 180) * Math.PI),
1.65 * Math.Sin(((double)210 / 180) * Math.PI)), true));
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(points[0].Geometry.X + R, points[0].Geometry.Y), true));
for (int i = 2; i < 7; i++)
{
Angle = ((((double)i - 2) * 60 + 120) / 180);
points.Add(Sketch.SketchPoints.Add(TransGeom[docName].CreatePoint2d(
points[i - 1].Geometry.X + R * Math.Cos(Angle * Math.PI),
points[i - 1].Geometry.Y + R * Math.Sin(Angle * Math.PI)), true));
lines.Add(Sketch.SketchLines.AddByTwoPoints(points[i - 1], points[i]));
}
lines.Add(Sketch.SketchLines.AddByTwoPoints(points[6], points[1]));
ProfileMain = (Profile)Sketch.Profiles.AddForSolid();
ExtrudeDef = CompDef[docName].Features.ExtrudeFeatures.AddByDistanceExtent(
/*Эскиз*/ ProfileMain,
/*Длина*/ 10.0 / 10,
/*Направление вдоль оси*/ PartFeatureExtentDirectionEnum.kPositiveExtentDirection,
/*Операция*/ PartFeatureOperationEnum.kJoinOperation,
/*Эскиз*/ ProfileMain);
///////////////////////////////////////////////// Фаска
ChamferFeature Fillet;
EdgeCollection Edges = ThisApplication.TransientObjects.CreateEdgeCollection();
int k = 0;
foreach (SurfaceBody SurfBody in PartDoc[docName].ComponentDefinition.SurfaceBodies)
{
foreach (Edge Edge in SurfBody.Edges)
{
if (k == 2)
{
Edges.Add(Edge);
}
if (k == 5)
{
Edges.Add(Edge);
}
if (k == 8)
{
Edges.Add(Edge);
}
if (k == 11)
{
Edges.Add(Edge);
}
if (k == 14)
{
Edges.Add(Edge);
}
if (k == 17)
{
Edges.Add(Edge);
}
k++;
}
}
Fillet = CompDef[docName].Features.ChamferFeatures.AddUsingDistance(Edges, 2.0 / 10);
///////////////////////////////////////////////// СОПРЯЖЕНИЕ
FilletFeature Fillet1;
Edges.Clear();
int n = 0;
foreach (SurfaceBody SurfBody in PartDoc[docName].ComponentDefinition.SurfaceBodies)
{
foreach (Edge Edge in SurfBody.Edges)
{
if (n == 18)
{
Edges.Add(Edge);
}
if (n == 20)
{
Edges.Add(Edge);
}
if (n == 21)
{
Edges.Add(Edge);
}
if (n == 23)
{
Edges.Add(Edge);
}
if (n == 26)
{
Edges.Add(Edge);
}
if (n == 27)
{
Edges.Add(Edge);
}
n++;
}
}
Fillet1 = CompDef[docName].Features.FilletFeatures.AddSimple(Edges, /*Радиус*/ 1.0 / 10);
// Заврешение транзакции
Trans[docName].End();
}
