// Added end
public override Messages Action(object act)
{
Messages msg = new Messages();
ActionOnLineHelper _helper = null;
BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null;
if (act == null)
{
return(msg);
}
DataCollect.Action.ActionEventArgs args;
if (ObjectState == null)
{
args = new BenQGuru.eMES.DataCollect.Action.ActionEventArgs();
args.RunningCard = act.ToString().ToUpper().Trim();
}
else
{
args = ObjectState as DataCollect.Action.ActionEventArgs;
}
string data = act.ToString().ToUpper().Trim(); //Keyparts
//Laws Lu,2006/06/03 添加 获取已有连接
if ((act as IDCTClient).DBConnection != null)
{
domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
}
else
{
domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider()
as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
(act as IDCTClient).DBConnection = domainProvider;
}
msg = CheckData(data, domainProvider);
if (keypartsHT == null)
{
// 按照逻辑，走到这个分支应该是错误的
string strFile = @"C:\DCT_EmptyMessage.txt";
string strLine = DateTime.Now.ToString("yyyy-MM-dd HH:mi:ss") + "\t" + "ActionCollectKeyParts" + "\t" + "Missing Product In Action, RunningCard:" + args.RunningCard + ",Input:" + data;
System.IO.StreamWriter writer = new System.IO.StreamWriter(strFile, true);
writer.WriteLine(strLine);
writer.Close();
//
if (msg.IsSuccess() &&
(keypartsHT == null || keypartsHT.ContainsKey("ProdcutInfo") == false))
{
//检查序列号
_helper = new ActionOnLineHelper(domainProvider);
msg = _helper.GetIDInfo(args.RunningCard);
// Added by Icyer 2006/12/14
// 检查序列号
ProductInfo product = (ProductInfo)msg.GetData().Values[0];
if (product == null || product.LastSimulation == null)
{
msg.ClearMessages();
msg.Add(new Message(MessageType.Error, "$NoSimulation"));
}
// base.Action (act);
// ActionCollectKeyparts actionCollectKeyparts = this;
// this.NextAction = actionCollectKeyparts;
// this.Status = ActionStatus.PrepareData;
// return msg;
// Added end
}
if (msg.IsSuccess() &&
(keypartsHT == null || keypartsHT.ContainsKey("KeypartsInfo") == false))
{
try
{
keypartsHT = new Hashtable();
keypartsHT.Add("ProdcutInfo", msg);
ProductInfo product = (ProductInfo)msg.GetData().Values[0];
/* Removed by Icyer 2006/12/14
* 如果序列号已在本上料工序，则GetMORouteNextOperation会取下一个工序，导致找不到OPBOM
* 改变推导OPBOM的逻辑
* ItemFacade itemFacade = new ItemFacade(domainProvider);
* object op = itemFacade.GetMORouteNextOperation(
* product.LastSimulation.MOCode,
* product.LastSimulation.RouteCode,
* product.LastSimulation.OPCode);
*
* OPBOMFacade opBOMFacade=new OPBOMFacade( domainProvider);
* object[] objBomDetail = opBOMFacade.GetOPBOMDetails(
* product.LastSimulation.MOCode,
* product.LastSimulation.RouteCode,
* (op as ItemRoute2OP).OPCode);
*/
// Added by Icyer 2006/12/14
IDCTClient client = act as IDCTClient;
OPBOMFacade opBOMFacade = new OPBOMFacade(domainProvider);
object[] objBomDetail = null;
DataCollect.ActionOnLineHelper onLine = new ActionOnLineHelper(domainProvider);
Messages messages1 = onLine.CheckID(
new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectKeyParts,
product.LastSimulation.RunningCard,
client.LoginedUser,
client.ResourceCode,
product,
null,
null));
if (messages1.IsSuccess() == true)
{
objBomDetail = opBOMFacade.GetOPBOMDetails(
product.NowSimulation.MOCode,
product.NowSimulation.RouteCode,
product.NowSimulation.OPCode);
}
else
{
throw new Exception(messages1.OutPut());
}
// Added end
MOFacade moFacade = new MOFacade(domainProvider);
object mo = moFacade.GetMO(product.LastSimulation.MOCode);
OPBomKeyparts opBomKeyparts = new OPBomKeyparts(objBomDetail, Convert.ToInt32(((MO)mo).IDMergeRule), domainProvider);
if (opBomKeyparts.Count == 0)
{
/* Removed by Icyer 2006/12/27 @ YHI
* msg.Add(new Message(MessageType.Error, "$CS_NOOPBomInfo $CS_Param_MOCode="+product.LastSimulation.MOCode
+" $CS_Param_RouteCode="+product.LastSimulation.RouteCode
+" $CS_Param_OPCode ="+product.LastSimulation.OPCode));
* throw new Exception(msg.OutPut());
*/
throw new Exception("$CS_NOOPBomInfo");
}
else
{
//opBomKeyparts.AddKeyparts(data, product.LastSimulation.MOCode); // Removed by Icyer 2006/12/14
keypartsHT.Add("KeypartsInfo", opBomKeyparts);
}
}
catch (Exception ex)
{
/* Removed by Icyer 2006/12/27 @ YHI
* keypartsHT = null;
* this.NeedCancel = true;
* throw ex;
*/
// Added by Icyer 2006/12/27 @ YHI
base.Action(act);
ActionCollectKeyparts actionCollectKeyparts = this;
this.NextAction = actionCollectKeyparts;
this.Status = ActionStatus.PrepareData;
msg.ClearMessages();
msg.Add(new UserControl.Message(MessageType.Error, ex.Message));
msg.Add(new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts"));
return(msg);
// Added end
}
}
}
if (msg.IsSuccess())
{
OPBomKeyparts opBomKeyparts = (OPBomKeyparts)keypartsHT["KeypartsInfo"];
msg = keypartsHT["ProdcutInfo"] as Messages;
MO moWillGo = (MO)keypartsHT["MOWillGo"];
ProductInfo product = (ProductInfo)msg.GetData().Values[0];
Messages msgResult = new Messages();
if (opBomKeyparts.Count > opBomKeyparts.GetbomKeypartCount())
{
try
{
//opBomKeyparts.AddKeyparts(data, product.LastSimulation.MOCode);
if (moWillGo == null)
{
msgResult.AddMessages(opBomKeyparts.AddKeyparts(data, product.LastSimulation.MOCode));
}
else
{
msgResult.AddMessages(opBomKeyparts.AddKeyparts(data, moWillGo.MOCode));
}
}
catch (Exception ex)
{
msgResult.Add(new UserControl.Message(MessageType.Error, ex.Message));
}
keypartsHT["KeypartsInfo"] = opBomKeyparts;
}
if (msgResult.IsSuccess() == false || opBomKeyparts.Count > opBomKeyparts.GetbomKeypartCount())
{
base.Action(act);
ActionCollectKeyparts actionCollectKeyparts = this;
this.NextAction = actionCollectKeyparts;
this.Status = ActionStatus.PrepareData;
this.OutMesssage = new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts " + (opBomKeyparts.GetbomKeypartCount() + 1).ToString() + "/" + opBomKeyparts.Count.ToString());
if (msgResult.IsSuccess() == false)
{
//msgResult.Add(new UserControl.Message(MessageType.Normal, "$DCT_PLEASE_INPUT_Keyparts"));
return(msgResult);
}
else
{
return(msg);
}
}
//((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)domainProvider).PersistBroker.OpenConnection();
domainProvider.BeginTransaction();
try
{
BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(domainProvider);
Resource resource = (Resource)dataModel.GetResource(args.ResourceCode);
_helper = new ActionOnLineHelper(domainProvider);
DataCollectFacade dataCollect = new DataCollect.DataCollectFacade(domainProvider);
ActionCheckStatus actionCheckStatus = new ActionCheckStatus();
actionCheckStatus.ProductInfo = product;
actionCheckStatus.ProductInfo.Resource = resource;
ExtendSimulation lastSimulation = actionCheckStatus.ProductInfo.LastSimulation;
BenQGuru.eMES.Material.WarehouseFacade wfacade = null;
if (System.Configuration.ConfigurationSettings.AppSettings["NeedMaterialModule"].Trim() == "1")
{
wfacade = new WarehouseFacade(domainProvider);
}
IDCTClient client = act as IDCTClient;
msg.AddMessages(_helper.ActionWithTransaction(
new CKeypartsActionEventArgs(
ActionType.DataCollectAction_CollectKeyParts,
product.NowSimulation.RunningCard,
client.LoginedUser,
client.ResourceCode,
product,
opBomKeyparts,
wfacade), actionCheckStatus));
// Added by Icyer 2006/12/28 @ YHI 采集集成上料
bool bLoadedINNO = false;
if (this.NeedCollectINNO == true && msg.IsSuccess() == true)
{
string strRCard = product.NowSimulation.RunningCard;
UserControl.Messages msgProduct = _helper.GetIDInfo(strRCard);
product = (ProductInfo)msgProduct.GetData().Values[0];
CINNOActionEventArgs argsInno = new CINNOActionEventArgs(
ActionType.DataCollectAction_CollectINNO,
strRCard,
client.LoginedUser,
client.ResourceCode,
product,
INNOCode,
wfacade
);
IAction action = new BenQGuru.eMES.DataCollect.Action.ActionFactory(domainProvider).CreateAction(ActionType.DataCollectAction_CollectINNO);
msg.AddMessages(action.Execute(argsInno));
if (msg.IsSuccess() == true)
{
bLoadedINNO = true;
msg.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_INNO_CollectSuccess[" + this.INNOCode + "] $CS_Keyparts_CollectSuccess")));
}
}
// Added end
if (msg.IsSuccess())
{
if (System.Configuration.ConfigurationSettings.AppSettings["NeedMaterialModule"].Trim() == "1")
{
if (wfacade != null)
{
wfacade.ExecCacheSQL();
}
}
domainProvider.CommitTransaction();
if (bLoadedINNO == false)
{
msg.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_Keyparts_CollectSuccess")));
}
}
else
{
domainProvider.RollbackTransaction();
}
}
catch (Exception ex)
{
domainProvider.RollbackTransaction();
msg.Add(new UserControl.Message(ex));
}
finally
{
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)domainProvider).PersistBroker.CloseConnection();
}
base.Action(act);
ActionRCard actRcard1 = new ActionRCard();
actRcard1.OutMesssage = new UserControl.Message(MessageType.Normal, "$CS_Please_Input_RunningCard");
this.NextAction = actRcard1;
this.ObjectState = null;
this.keypartsHT = null;
this.Status = ActionStatus.PrepareData;
return(msg);
}
base.Action(act);
//Web.Helper.ActionType acttype = new Web.Helper.ActionType();
// if(acttype.Items.Contains(args.RunningCard))
// {
// (act as IDCTClient).CachedAction = null;
// }
ActionRCard actRcard = new ActionRCard();
actRcard.OutMesssage = new UserControl.Message(MessageType.Normal, "$CS_Please_Input_RunningCard");
this.NextAction = actRcard;
// Added by Icyer 2006/12/14
this.ObjectState = null;
this.keypartsHT = null;
this.Status = ActionStatus.PrepareData;
// Added end
return(msg);
}
// Added end
public override Messages Action(object act)
{
Messages msg = new Messages();
ActionOnLineHelper _helper = null;
BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider domainProvider = null;
if (act == null)
{
return(msg);
}
DataCollect.Action.ActionEventArgs args;
if (ObjectState == null)
{
args = new BenQGuru.eMES.DataCollect.Action.ActionEventArgs();
args.RunningCard = act.ToString().ToUpper().Trim();
}
else
{
args = ObjectState as DataCollect.Action.ActionEventArgs;
}
string data = act.ToString().ToUpper().Trim();
//Laws Lu,2006/06/03 添加 获取已有连接
if ((act as IDCTClient).DBConnection != null)
{
domainProvider = (act as IDCTClient).DBConnection as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
}
else
{
domainProvider = Common.DomainDataProvider.DomainDataProviderManager.DomainDataProvider()
as BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider;
(act as IDCTClient).DBConnection = domainProvider;
}
DataCollectFacade dataCollect = new DataCollect.DataCollectFacade(domainProvider);
TSFacade tsFacade = new TSFacade(domainProvider);
if (msg.IsSuccess())
{
MO moWillGo = (MO)keypartsHT["MOWillGo"];
ProductInfo product = (ProductInfo)keypartsHT["ProdcutInfo"];
if (opBomDetailCount > opBomDetailCollectNum)
{
try
{
object[] opBomDetailCompare = new object[opBomDetailList.Count];
opBomDetailList.CopyTo(opBomDetailCompare);
string ItemCode = string.Empty;
string parseTypeSetting = "," + ((OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum]).OPBOMParseType + ",";
string checkTypeSetting = "," + ((OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum]).OPBOMCheckType + ",";
bool checkStatus = ((OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum]).CheckStatus == BenQGuru.eMES.Web.Helper.FormatHelper.TRUE_STRING;
string CheckNeedVendor = string.Empty;
if (!string.IsNullOrEmpty(((OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum]).NeedVendor))
{
CheckNeedVendor = ((OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum]).NeedVendor;
}
string MItemCode = ((OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum]).OPBOMItemCode;
string OBSItemCode = ((OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum]).OPBOMSourceItemCode;
int inputLength = ((OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum]).SerialNoLength;
MaterialFacade facade = new MaterialFacade(domainProvider);
MINNO newMINNO = facade.CreateNewMINNO();
newMINNO.MItemCode = MItemCode;
Messages parseSuccess = new Messages();
Messages oldParseSuccess = new Messages();
parseSuccess.Add(new UserControl.Message(MessageType.Error, "$CS_Error_ParseFailed:"));
int num = 0;
//勾选了料号比对,必须选择解析方式
if (checkTypeSetting.IndexOf("," + OPBOMDetailCheckType.CHECK_COMPAREITEM.ToLower() + ",") >= 0)
{
if (parseTypeSetting.IndexOf("," + OPBOMDetailParseType.PARSE_BARCODE.ToLower() + ",") < 0 &&
parseTypeSetting.IndexOf("," + OPBOMDetailParseType.PARSE_PREPARE.ToLower() + ",") < 0 &&
parseTypeSetting.IndexOf("," + OPBOMDetailParseType.PARSE_PRODUCT.ToLower() + ",") < 0)
{
msg.Add(new UserControl.Message(MessageType.Error, " $CS_Error_ParseFailed:$CheckCompareItem_Must_CheckOneParse"));
goto Label2;
}
}
//Parse from barcode
if (!parseSuccess.IsSuccess() && parseTypeSetting.IndexOf("," + OPBOMDetailParseType.PARSE_BARCODE.ToLower() + ",") >= 0)
{
OPBOMDetail opBOMDetailForItemCode = null;
if (checkTypeSetting.IndexOf("," + OPBOMDetailCheckType.CHECK_COMPAREITEM.ToLower() + ",") >= 0)
{
opBOMDetailForItemCode = (OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum];
}
oldParseSuccess.AddMessages(parseSuccess);
parseSuccess = dataCollect.ParseFromBarcode(ref newMINNO, data, opBOMDetailForItemCode, inputLength);
num += 1;
}
//Parse from prepare
if (!parseSuccess.IsSuccess() && parseTypeSetting.IndexOf("," + OPBOMDetailParseType.PARSE_PREPARE.ToLower() + ",") >= 0)
{
Simulation sim = (Simulation)dataCollect.GetSimulation(ID);
newMINNO.MOCode = sim.MOCode;
OPBOMDetail opBOMDetailForItemCode = null;
if (checkTypeSetting.IndexOf("," + OPBOMDetailCheckType.CHECK_COMPAREITEM.ToLower() + ",") >= 0)
{
opBOMDetailForItemCode = (OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum];
}
oldParseSuccess.AddMessages(parseSuccess);
parseSuccess = dataCollect.ParseFromPrepare(ref newMINNO, data, opBOMDetailForItemCode, inputLength);
num += 1;
}
//Parse from product
if (!parseSuccess.IsSuccess() && parseTypeSetting.IndexOf("," + OPBOMDetailParseType.PARSE_PRODUCT.ToLower() + ",") >= 0)
{
OPBOMDetail opBOMDetailForItemCode = null;
if (checkTypeSetting.IndexOf("," + OPBOMDetailCheckType.CHECK_COMPAREITEM.ToLower() + ",") >= 0)
{
opBOMDetailForItemCode = (OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum];
}
oldParseSuccess.AddMessages(parseSuccess);
parseSuccess = dataCollect.ParseFromProduct(ref newMINNO, checkStatus, data, opBOMDetailForItemCode, inputLength);
num += 1;
}
if (!parseSuccess.IsSuccess())
{
if (num > 0)
{
oldParseSuccess.AddMessages(parseSuccess);
msg.AddMessages(oldParseSuccess);
goto Label2;
}
if (num == 0)
{
if (inputLength > 0 && data.Trim().Length != inputLength)
{
msg.Add(new UserControl.Message(MessageType.Error, "$Error_SNLength_Wrong"));
goto Label2;
}
}
}
//检查新上料是否在TS中而不可用
if (!tsFacade.RunningCardCanBeClollected(data, CardType.CardType_Part))
{
msg.Add(new UserControl.Message(MessageType.Error, "$Error_Material_InTSOrScrapped $SERIAL_NO=" + data));
goto Label2;
}
#region Check if key part was used
if (((OPBOMDetail)opBomDetailCompare[opBomDetailCollectNum]).OPBOMItemControlType == BOMItemControlType.ITEM_CONTROL_KEYPARTS &&
KeyPartUsed(domainProvider, data, newMINNO.MItemCode, true))
{
msg.Add(new UserControl.Message(MessageType.Error, "$CS_Error_KeyPartUsed"));
goto Label2;
}
#endregion
#region check NeedVendor
//如果VendorCode为空，到tblmaterial中获取
if (newMINNO.VendorCode == null || newMINNO.VendorCode.Trim().Length <= 0)
{
ItemFacade itemfacade = new ItemFacade(domainProvider);
object objMaterial = itemfacade.GetMaterial(newMINNO.MItemCode.Trim(), GlobalVariables.CurrentOrganizations.First().OrganizationID);
if (objMaterial != null)
{
newMINNO.VendorCode = ((BenQGuru.eMES.Domain.MOModel.Material)objMaterial).VendorCode;
}
}
if (CheckNeedVendor == NeedVendor.NeedVendor_Y)
{
Messages checkNeedVendor = new Messages();
checkNeedVendor = dataCollect.CheckNeedVebdor(newMINNO);
if (!checkNeedVendor.IsSuccess())
{
msg.AddMessages(checkNeedVendor);
goto Label2;
}
}
#endregion
if (checkTypeSetting.IndexOf("," + OPBOMDetailCheckType.CHECK_LINKBARCODE.ToLower() + ",") >= 0)
{
//Link barcode
if (string.IsNullOrEmpty(newMINNO.MItemCode))
{
newMINNO.MItemCode = MItemCode;
}
newMINNO.MItemPackedNo = data;
if (((OPBOMDetail)opBomDetailList[opBomDetailCollectNum]).OPBOMItemControlType == BOMItemControlType.ITEM_CONTROL_KEYPARTS)
{
newMINNO.EAttribute1 = MCardType.MCardType_Keyparts;
}
else if (((OPBOMDetail)opBomDetailList[opBomDetailCollectNum]).OPBOMItemControlType == BOMItemControlType.ITEM_CONTROL_LOT)
{
newMINNO.EAttribute1 = MCardType.MCardType_INNO;
newMINNO.Qty = ((OPBOMDetail)opBomDetailList[opBomDetailCollectNum]).OPBOMItemQty;
}
opBomdetailRealCollectList.Add((object)newMINNO);
}
++opBomDetailCollectNum;
Label2:
if (opBomDetailCount > opBomDetailCollectNum)
{
if (((OPBOMDetail)opBomDetailList[opBomDetailCollectNum]).OPBOMItemControlType != null &&
((OPBOMDetail)opBomDetailList[opBomDetailCollectNum]).OPBOMItemControlType == BOMItemControlType.ITEM_CONTROL_LOT)
{
msg.Add(new UserControl.Message(MessageType.Normal, ">>$DCT_PLEASE_INPUT_Lot:" + ((OPBOMDetail)opBomDetailList[opBomDetailCollectNum]).OPBOMSourceItemCode));
ProcessBeforeReturn(this.Status, msg);
return(msg);
}
else
{
msg.Add(new UserControl.Message(MessageType.Normal, ">>$CS_PleaseInputKeypart:" + ((OPBOMDetail)opBomDetailList[opBomDetailCollectNum]).OPBOMSourceItemCode));
ProcessBeforeReturn(this.Status, msg);
return(msg);
}
}
}
catch (Exception ex)
{
msg.Add(new UserControl.Message(MessageType.Error, ex.Message));
}
}
domainProvider.BeginTransaction();
try
{
BenQGuru.eMES.BaseSetting.BaseModelFacade dataModel = new BenQGuru.eMES.BaseSetting.BaseModelFacade(domainProvider);
Resource resource = (Resource)dataModel.GetResource(args.ResourceCode);
_helper = new ActionOnLineHelper(domainProvider);
ActionCheckStatus actionCheckStatus = new ActionCheckStatus();
actionCheckStatus.ProductInfo = product;
actionCheckStatus.ProductInfo.Resource = resource;
ExtendSimulation lastSimulation = actionCheckStatus.ProductInfo.LastSimulation;
BenQGuru.eMES.Material.WarehouseFacade wfacade = null;
if (System.Configuration.ConfigurationSettings.AppSettings["NeedMaterialModule"].Trim() == "1")
{
wfacade = new WarehouseFacade(domainProvider);
}
IDCTClient client = act as IDCTClient;
//检查新上料是否在TS中而不可用
if (opBomdetailRealCollectList != null)
{
foreach (MINNO minno in opBomdetailRealCollectList)
{
if (!tsFacade.RunningCardCanBeClollected(minno.MItemPackedNo, CardType.CardType_Part))
{
msg.Add(new UserControl.Message(MessageType.Error, "$Error_Material_InTSOrScrapped $SERIAL_NO=" + minno.MItemPackedNo));
break;
}
}
}
#region Check if key part was used
if (opBomdetailRealCollectList != null)
{
foreach (MINNO minno in opBomdetailRealCollectList)
{
if (minno.EAttribute1 == MCardType.MCardType_Keyparts)
{
if (KeyPartUsed(domainProvider, minno.MItemPackedNo, minno.MItemCode, false))
{
msg.Add(new UserControl.Message(MessageType.Error, "$CS_Error_KeyPartUsed"));
break;
}
}
}
}
#endregion
if (msg.IsSuccess())
{
object[] objOpBomdetailRealCollect = new object[opBomdetailRealCollectList.Count];
opBomdetailRealCollectList.CopyTo(objOpBomdetailRealCollect);
string strRCard = product.NowSimulation.RunningCard;
msg.AddMessages(_helper.ActionWithTransaction(
new CINNOActionEventArgs(
ActionType.DataCollectAction_CollectINNO, strRCard,
client.LoginedUser,
client.ResourceCode,
product,
string.Empty,
wfacade), actionCheckStatus, objOpBomdetailRealCollect));
}
#region 物料过账
if (msg.IsSuccess())
{
BaseModelFacade bMfacade = new BaseModelFacade(domainProvider);
object objOP = bMfacade.GetOperationByResource(client.ResourceCode);
string strRCard = product.NowSimulation.RunningCard;
object[] objOpBomdetailRealCollect = new object[opBomdetailRealCollectList.Count];
opBomdetailRealCollectList.CopyTo(objOpBomdetailRealCollect);
if (opBomdetailRealCollectList != null && opBomdetailRealCollectList.Count > 0)
{
Messages messagesNew = new Messages();
string ItemCode = string.Empty;
DataCollectFacade dataCollectFacade = new DataCollectFacade(domainProvider);
object objectSimulation = dataCollectFacade.GetSimulation(strRCard);
if (objectSimulation != null)
{
ItemCode = ((Simulation)objectSimulation).ItemCode;
}
foreach (MINNO minno in opBomdetailRealCollectList)
{
messagesNew.AddMessages(_helper.ActionWithTransaction(new TryEventArgs(
ActionType.DataCollectAction_TryNew, client.LoginedUser, ((Operation2Resource)objOP).OPCode, client.ResourceCode,
ItemCode, strRCard, minno.MItemCode, minno.MItemPackedNo, string.Empty, true, true)));
}
msg.AddMessages(messagesNew);
}
}
#endregion
if (msg.IsSuccess())
{
if (System.Configuration.ConfigurationSettings.AppSettings["NeedMaterialModule"].Trim() == "1")
{
if (wfacade != null)
{
wfacade.ExecCacheSQL();
}
}
#region 增加良品采集
{
Resource Resource = (Resource)dataModel.GetResource(client.ResourceCode);
Messages messages1 = new Messages();
if (actionCheckStatus.ProductInfo == null)
{
messages1 = _helper.GetIDInfo(ID);
actionCheckStatus.ProductInfo = (ProductInfo)messages1.GetData().Values[0];
actionCheckStatus.ProductInfo.Resource = Resource;
lastSimulation = actionCheckStatus.ProductInfo.LastSimulation;
msg.AddMessages(messages1);
}
else //将上一个Action的NowSimulation设置为本Action的LastSimulation
{
if (actionCheckStatus.ActionList.Count > 0)
{
actionCheckStatus.ProductInfo = new ProductInfo();
actionCheckStatus.ProductInfo.NowSimulation = new Simulation();
actionCheckStatus.ProductInfo.Resource = Resource;
//actionCheckStatus.ProductInfo.LastSimulation =
// new ExtendSimulation(((ActionEventArgs)actionCheckStatus.ActionList[actionCheckStatus.ActionList.Count - 1]).ProductInfo.NowSimulation);
actionCheckStatus.ProductInfo.LastSimulation =
new ExtendSimulation((Simulation)(new DataCollectFacade(domainProvider)).GetLastSimulationOrderByDateAndTime(ID));
}
}
product = actionCheckStatus.ProductInfo;
// Changed end
if (msg.IsSuccess())
{
messages1.AddMessages(_helper.ActionWithTransaction(new ActionEventArgs(ActionType.DataCollectAction_GOOD, ID,
client.LoginedUser, client.ResourceCode,
product), actionCheckStatus));
}
}
#endregion
}
if (msg.IsSuccess())
{
domainProvider.CommitTransaction();
msg.Add(new UserControl.Message(MessageType.Success, string.Format("$CS_CollectSuccess")));
}
else
{
domainProvider.RollbackTransaction();
}
}
catch (Exception ex)
{
domainProvider.RollbackTransaction();
msg.Add(new UserControl.Message(ex));
}
finally
{
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)domainProvider).PersistBroker.CloseConnection();
}
}
if (msg.IsSuccess())
{
base.Action(act);
this.ObjectState = null;
this.keypartsHT = null;
this.opBomDetailList.Clear();
this.opBomDetailCount = 0;
this.opBomDetailCollectNum = 0;
this.opBomdetailRealCollectList.Clear();
ID = string.Empty;
}
ProcessBeforeReturn(this.Status, msg);
return(msg);
}
protected override void AddDomainObject(object domainObject)
{
if (_RMAFacade == null)
{
_RMAFacade = new BenQGuru.eMES.MOModel.RMAFacade(base.DataProvider);
}
//已经关闭或结案的RMA不能新增行项目
string RMABillCode = this.txtRMABillCode.Text.Trim();
object obj = _RMAFacade.GetRMABill(RMABillCode);
if (((RMABill)obj).Status == RMABillStatus.Closed)
{
WebInfoPublish.Publish(this, "$BS_RMABillStatus_IsClose_CannotAdd", this.languageComponent1);
return;
}
if (((RMABill)obj).Status == RMABillStatus.Opened)
{
WebInfoPublish.Publish(this, "$BS_RMABillStatus_IsOpened_CannotAdd", this.languageComponent1);
return;
}
//新增前唯一性检查
string rcard = FormatHelper.CleanString(this.txtRCardEdit.Text).ToUpper();
if (_DataCollectFacade == null)
{
_DataCollectFacade = new BenQGuru.eMES.DataCollect.DataCollectFacade(this.DataProvider);
}
object objSim = _DataCollectFacade.GetLastSimulationReport(rcard);
//if (objSim == null)
//{
// WebInfoPublish.Publish(this, "$BS_RCARD_NOT_EXIST", this.languageComponent1);
// return;
//}
if (objSim != null && (objSim as Domain.DataCollect.SimulationReport).IsComplete != "1")
{
WebInfoPublish.Publish(this, "$BS_RCARD_IS_NOT_COMPLETE", this.languageComponent1);
return;
}
object objExist = this._RMAFacade.GetRMADetailByRCard(rcard);
if (objExist != null)
{
WebInfoPublish.Publish(this, "$BS_ALREADY_RMABillDetial", this.languageComponent1);
return;
}
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
((RMADetial)domainObject).Mdate = dbDateTime.DBDate;
((RMADetial)domainObject).Mtime = dbDateTime.DBTime;
((RMADetial)domainObject).MaintainUser = this.GetUserCode();
this._RMAFacade.AddRMADetial((RMADetial)domainObject);
}