public static void CreateAssetRule()
{
DDSMeshImportRule newRule = CreateInstance <DDSMeshImportRule>();
string selectionpath = "Assets";
foreach (Object obj in Selection.GetFiltered(typeof(Object), SelectionMode.Assets))
{
selectionpath = AssetDatabase.GetAssetPath(obj);
Debug.Log("selectionpath in foreach: " + selectionpath);
if (File.Exists(selectionpath))
{
Debug.Log("File.Exists: " + selectionpath);
selectionpath = Path.GetDirectoryName(selectionpath);
}
break;
}
Debug.Log("selectionpath: " + selectionpath);
string newRuleFileName = AssetDatabase.GenerateUniqueAssetPath(Path.Combine(selectionpath, "New Mesh Rule.asset"));
newRuleFileName = newRuleFileName.Replace("\\", "/");
AssetDatabase.CreateAsset(newRule, newRuleFileName);
AssetDatabase.SaveAssets();
AssetDatabase.Refresh();
EditorUtility.FocusProjectWindow();
Selection.activeObject = newRule;
}
private void Apply(DDSMeshImportRule assetRule)
{
//get the directories that we do not want to apply changes to
List <string> dontapply = new List <string>();
string assetrulepath = AssetDatabase.GetAssetPath(assetRule).Replace(assetRule.name + ".asset", "").TrimEnd('/');
string projPath = Application.dataPath;
projPath = projPath.Remove(projPath.Length - 6);
string[] directories = Directory.GetDirectories(Path.GetDirectoryName(projPath + AssetDatabase.GetAssetPath(assetRule)), "*", SearchOption.AllDirectories);
foreach (string directory in directories)
{
string d = directory.Replace(Application.dataPath, "Assets");
string[] appDirs = AssetDatabase.FindAssets("t:AssetRule", new[] { d });
if (appDirs.Length != 0)
{
d = d.TrimEnd('/');
d = d.Replace('\\', '/');
dontapply.Add(d);
}
}
List <string> finalAssetList = new List <string>();
foreach (string findAsset in AssetDatabase.FindAssets("", new[] { assetrulepath }))
{
string asset = AssetDatabase.GUIDToAssetPath(findAsset);
if (!File.Exists(asset))
{
continue;
}
if (dontapply.Contains(Path.GetDirectoryName(asset)))
{
continue;
}
if (!assetRule.IsMatch(AssetImporter.GetAtPath(asset)))
{
continue;
}
if (finalAssetList.Contains(asset))
{
continue;
}
if (asset == AssetDatabase.GetAssetPath(assetRule))
{
continue;
}
finalAssetList.Add(asset);
}
foreach (string asset in finalAssetList)
{
AssetImporter.GetAtPath(asset).SaveAndReimport();
}
changed = false;
}
public override void OnInspectorGUI()
{
DDSMeshImportRule t = (DDSMeshImportRule)target;
EditorGUI.BeginChangeCheck();
// Always allow user to switch between tabs even when the editor is disabled, so they can look at all parts
// of read-only assets
using (new EditorGUI.DisabledScope(false)) // this doesn't enable the UI, but it seems correct to push the stack
{
GUI.enabled = true;
using (new GUILayout.HorizontalScope())
{
GUILayout.FlexibleSpace();
using (EditorGUI.ChangeCheckScope check = new EditorGUI.ChangeCheckScope())
{
m_ActiveEditorIndex = GUILayout.Toolbar(m_ActiveEditorIndex, m_TabNames, "LargeButton");
if (check.changed)
{
EditorPrefs.SetInt(GetType().Name + "ActiveEditorIndex", m_ActiveEditorIndex);
activeTab = m_Tabs[m_ActiveEditorIndex];
activeTab.OnInspectorGUI(t);
}
}
GUILayout.FlexibleSpace();
}
}
// the activeTab can get destroyed when opening particular sub-editors (such as the Avatar configuration editor on the Rig tab)
if (activeTab != null)
{
activeTab.OnInspectorGUI(t);
}
//// show a single Apply/Revert set of buttons for all the tabs
ApplyRevertGUI();
if (EditorGUI.EndChangeCheck())
{
changed = true;
}
if (changed)
{
EditorGUILayout.Space();
GUILayout.BeginHorizontal();
GUILayout.FlexibleSpace();
if (GUILayout.Button("Apply"))
{
Apply(t);
}
EditorUtility.SetDirty(t);
GUILayout.EndHorizontal();
}
}
private void NormalsAndTangentsGUI(DDSMeshImportRule rule)
{
// Tangent space
GUILayout.Label(styles.TangentSpace, EditorStyles.boldLabel);
// TODO : check if normal import is supported!
//normalImportMode = styles.TangentSpaceModeOptEnumsAll[EditorGUILayout.Popup(styles.TangentSpaceNormalLabel, (int)normalImportMode, styles.TangentSpaceModeOptLabelsAll)];
EditorGUI.BeginChangeCheck();
rule.m_NormalImportMode = (ModelImporterNormals)EditorGUILayout.EnumPopup(styles.TangentSpaceNormalLabel, rule.m_NormalImportMode);
if (EditorGUI.EndChangeCheck())
{
// Let the tangent mode follow the normal mode - that's a sane default and it's needed
// because the tangent mode value can't be lower than the normal mode.
// We make the tangent mode follow in BOTH directions for consistency
// - so that if you change the normal mode one way and then back, the tangent mode will also go back again.
if (rule.m_NormalImportMode == ModelImporterNormals.None)
{
rule.m_TangentImportMode = ModelImporterTangents.None;
}
else if (rule.m_NormalImportMode == ModelImporterNormals.Import)
{
rule.m_TangentImportMode = ModelImporterTangents.Import;
}
else
{
rule.m_TangentImportMode = ModelImporterTangents.CalculateMikk;
}
}
// Normal split angle
using (new EditorGUI.DisabledScope(rule.m_NormalImportMode != ModelImporterNormals.Calculate))
{
rule.m_NormalSmoothAngle = EditorGUILayout.Slider(styles.SmoothingAngle, rule.m_NormalSmoothAngle, 0f, 180f);
}
GUIContent[] displayedOptions = styles.TangentSpaceModeOptLabelsAll;
ModelImporterTangents[] array = styles.TangentSpaceModeOptEnumsAll;
if (rule.m_NormalImportMode == ModelImporterNormals.Calculate)
{
displayedOptions = styles.TangentSpaceModeOptLabelsCalculate;
array = styles.TangentSpaceModeOptEnumsCalculate;
}
else if (rule.m_NormalImportMode == ModelImporterNormals.None)
{
displayedOptions = styles.TangentSpaceModeOptLabelsNone;
array = styles.TangentSpaceModeOptEnumsNone;
}
using (new EditorGUI.DisabledScope(rule.m_NormalImportMode == ModelImporterNormals.None))
{
int num = Array.IndexOf(array, rule.m_TangentImportMode);
EditorGUI.BeginChangeCheck();
num = EditorGUILayout.Popup(styles.TangentSpaceTangentLabel, num, displayedOptions, new GUILayoutOption[0]);
if (EditorGUI.EndChangeCheck())
{
rule.m_TangentImportMode = array[num];
}
}
}
public override void OnInspectorGUI(DDSMeshImportRule t)
{
if (styles == null)
{
styles = new Styles();
}
MeshesGUI(t);
NormalsAndTangentsGUI(t);
}
private void MeshesGUI(DDSMeshImportRule t)
{
GUILayout.Label(styles.Meshes, EditorStyles.boldLabel);
t.m_GlobalScale = EditorGUILayout.FloatField(styles.ScaleFactor, t.m_GlobalScale, new GUILayoutOption[0]);
// File Scale Factor
t.m_UseFileScale = EditorGUILayout.Toggle(styles.UseFileScale, t.m_UseFileScale);
if (t.m_UseFileScale)
{
EditorGUI.indentLevel++;
t.m_FileScale = EditorGUILayout.FloatField(styles.UseFileScale, t.m_FileScale, new GUILayoutOption[0]);
EditorGUI.indentLevel--;
}
//// mesh compression
t.m_MeshCompression = (ModelImporterMeshCompression)
EditorGUILayout.EnumPopup(styles.MeshCompressionLabel, t.m_MeshCompression);
t.m_IsReadable = EditorGUILayout.Toggle(styles.IsReadable, t.m_IsReadable);
t.m_OptimizeMeshForGPU = EditorGUILayout.Toggle(styles.OptimizeMeshForGPU, t.m_OptimizeMeshForGPU);
t.m_ImportBlendShapes = EditorGUILayout.Toggle(styles.ImportBlendShapes, t.m_ImportBlendShapes);
t.m_AddColliders = EditorGUILayout.Toggle(styles.MeshCompressionLabel, t.m_AddColliders);
using (new EditorGUI.DisabledScope(true))
{
t.m_KeepQuads = EditorGUILayout.Toggle(styles.KeepQuads, t.m_KeepQuads);
}
//EditorGUILayout.Popup(m_IndexFormat, styles.IndexFormatOpt, styles.IndexFormatLabel);
//// Weld Vertices
t.m_WeldVertices = EditorGUILayout.Toggle(styles.WeldVertices, t.m_WeldVertices);
//// Import visibility
//EditorGUILayout.PropertyField(m_ImportVisibility, styles.ImportVisibility);
//// Import Cameras
//EditorGUILayout.PropertyField(m_ImportCameras, styles.ImportCameras);
//// Import Lights
//EditorGUILayout.PropertyField(m_ImportLights, styles.ImportLights);
//// Preserve Hierarchy
//EditorGUILayout.PropertyField(m_PreserveHierarchy, styles.PreserveHierarchy);
//// Swap uv channel
t.m_SwapUVChannels = EditorGUILayout.Toggle(styles.SwapUVChannels, t.m_SwapUVChannels);
// Secondary UV generation
EditorGUILayout.BeginHorizontal();
t.m_GenerateSecondaryUV = EditorGUILayout.Toggle(styles.GenerateSecondaryUV, t.m_GenerateSecondaryUV);
if (t.m_GenerateSecondaryUV)
{
t.TipsForGenerate2UV = EditorGUILayout.Toggle(styles.TipsForGenerate2UV, t.TipsForGenerate2UV);
}
EditorGUILayout.EndHorizontal();
if (t.m_GenerateSecondaryUV && t.TipsForGenerate2UV)
{
EditorGUI.indentLevel++;
t.m_SecondaryUVAdvancedOptions = EditorGUILayout.Foldout(t.m_SecondaryUVAdvancedOptions,
styles.GenerateSecondaryUVAdvanced, EditorStyles.foldout);
if (t.m_SecondaryUVAdvancedOptions)
{
t.m_SecondaryUVHardAngle = Mathf.Max(EditorGUILayout.Slider(styles.secondaryUVHardAngle,
t.m_SecondaryUVHardAngle, 0f, 180f, new GUILayoutOption[0]), 0.1f);
t.m_SecondaryUVPackMargin = Mathf.Max(EditorGUILayout.Slider(styles.secondaryUVPackMargin,
t.m_SecondaryUVPackMargin, 0f, 180f, new GUILayoutOption[0]), 0.1f);
t.m_SecondaryUVAngleDistortion = Mathf.Max(EditorGUILayout.Slider(styles.secondaryUVAngleDistortion,
t.m_SecondaryUVAngleDistortion, 0f, 180f, new GUILayoutOption[0]), 0.1f);
t.m_SecondaryUVAreaDistortion = Mathf.Max(EditorGUILayout.Slider(styles.secondaryUVAreaDistortion,
t.m_SecondaryUVAreaDistortion, 0f, 180f, new GUILayoutOption[0]), 0.1f);
}
EditorGUI.indentLevel--;
}
}
public virtual void OnInspectorGUI(DDSMeshImportRule ddsMeshImportRule)
{
}