private void connect(IVisio.Shape a, IVisio.Shape b, bool a_arrow, bool b_arrow)
{
var page = a.ContainingPage;
var connectors_stencil = page.Application.Documents.OpenStencil("connec_u.vss");
var connectors_masters = connectors_stencil.Masters;
var dcm = connectors_masters["Dynamic Connector"];
var drop_point = new VADRAW.Point(-2, -2);
var c1 = page.Drop(dcm, drop_point);
ConnectorHelper.ConnectShapes(a, b, c1);
//a.AutoConnect(b, connect_dir_none, null);
if (a_arrow || b_arrow)
{
var writer = new FormulaWriterSIDSRC();
if (a_arrow)
{
writer.SetFormula(c1.ID16, VASS.SRCConstants.BeginArrow, "13");
}
if (b_arrow)
{
writer.SetFormula(c1.ID16, VASS.SRCConstants.EndArrow, "13");
}
writer.Commit(page);
}
}
private void _draw_connectors(RenderContext context)
{
var connector_nodes = this._shapes.OfType <Connector>().ToList();
// if no dynamic connectors then do nothing
if (connector_nodes.Count < 1)
{
return;
}
// Drop the number of connectors needed somewhere on the page
var masters = connector_nodes.Select(i => i.Master.VisioMaster).ToArray();
var origin = new VisioAutomation.Geometry.Point(-2, -2);
var points = Enumerable.Range(0, connector_nodes.Count)
.Select(i => origin + new VisioAutomation.Geometry.Point(1.10, 0))
.ToList();
var connector_shapeids = context.VisioPage.DropManyU(masters, points);
var page_shapes = context.VisioPage.Shapes;
// Perform the connection
for (int i = 0; i < connector_shapeids.Length; i++)
{
var connector_shapeid = connector_shapeids[i];
var vis_connector = page_shapes.ItemFromID[connector_shapeid];
var dyncon_shape = connector_nodes[i];
var from_shape = context.GetShape(dyncon_shape.From.VisioShapeID);
var to_shape = context.GetShape(dyncon_shape.To.VisioShapeID);
ConnectorHelper.ConnectShapes(from_shape, to_shape, vis_connector);
dyncon_shape.VisioShape = vis_connector;
dyncon_shape.VisioShapeID = connector_shapeids[i];
}
}
public static void ConnectorsToBack()
{
var doc = SampleEnvironment.Application.ActiveDocument;
var pages = doc.Pages;
var page = pages.Add();
// based on this example: http://www.visguy.com/2009/06/17/send-all-connectors-to-back/
var stencil = SampleEnvironment.Application.Documents.OpenStencil("basic_u.vss");
var master = stencil.Masters["Dynamic Connector"];
var r0 = page.DrawRectangle(3, 3, 5, 5);
var r1 = page.DrawRectangle(0, 1, 2, 2);
var r2 = page.DrawRectangle(7, 7, 8, 8);
var connector = page.Drop(master, 0, 0);
ConnectorHelper.ConnectShapes(r1, r2, connector);
var con_layer = page.Layers["Connector"];
var sel = page.CreateSelection(
IVisio.VisSelectionTypes.visSelTypeByLayer,
IVisio.VisSelectMode.visSelModeSkipSub,
con_layer);
sel.SendToBack();
}
public void Connect1()
{
var page1 = this.GetNewPage();
var s1 = page1.DrawRectangle(1, 1, 2, 2);
var s2 = page1.DrawRectangle(5, 5, 6, 6);
var stencil = page1.Application.Documents.OpenStencil("connec_u.vss");
var master = stencil.Masters["Dynamic Connector"];
var connector = page1.Drop(master, 0, 0);
ConnectorHelper.ConnectShapes(s1, s2, connector);
page1.Delete(0);
}
public List <IVisio.Shape> ConnectShapes(IList <IVisio.Shape> fromshapes, IList <IVisio.Shape> toshapes, IVisio.Master master)
{
var cmdtarget = this._client.GetCommandTargetPage();
using (var undoscope = this._client.Undo.NewUndoScope(nameof(ConnectShapes)))
{
if (master == null)
{
var connectors = ConnectorHelper.ConnectShapes(cmdtarget.ActivePage, fromshapes, toshapes, null, false);
return(connectors);
}
else
{
var connectors = ConnectorHelper.ConnectShapes(cmdtarget.ActivePage, fromshapes, toshapes, master);
return(connectors);
}
}
}
public List <IVisio.Shape> ConnectShapes(VisioScripting.TargetPage target_page, IList <IVisio.Shape> fromshapes, IList <IVisio.Shape> toshapes, IVisio.Master master)
{
target_page = target_page.ResolveToPage(this._client);
using (var undoscope = this._client.Undo.NewUndoScope(nameof(ConnectShapes)))
{
if (master == null)
{
var connectors = ConnectorHelper.ConnectShapes(target_page.Page, fromshapes, toshapes, null, false);
return(connectors);
}
else
{
var connectors = ConnectorHelper.ConnectShapes(target_page.Page, fromshapes, toshapes, master);
return(connectors);
}
}
}
public IList <IVisio.Shape> Connect(IList <IVisio.Shape> fromshapes, IList <IVisio.Shape> toshapes, IVisio.Master master)
{
this.AssertApplicationAvailable();
this.AssertDocumentAvailable();
var active_page = this.Client.VisioApplication.ActivePage;
using (var undoscope = new VA.Application.UndoScope(this.Client.VisioApplication, undoname_connectShapes))
{
if (master == null)
{
var connectors = ConnectorHelper.ConnectShapes(active_page, fromshapes, toshapes, null, false);
return(connectors);
}
else
{
var connectors = ConnectorHelper.ConnectShapes(active_page, fromshapes, toshapes, master);
return(connectors);
}
}
}
public List <IVisio.Shape> Connect(IList <IVisio.Shape> fromshapes, IList <IVisio.Shape> toshapes, IVisio.Master master)
{
this._client.Application.AssertApplicationAvailable();
this._client.Document.AssertDocumentAvailable();
var application = this._client.Application.Get();
var active_page = application.ActivePage;
using (var undoscope = this._client.Application.NewUndoScope("Connect Shapes"))
{
if (master == null)
{
var connectors = ConnectorHelper.ConnectShapes(active_page, fromshapes, toshapes, null, false);
return(connectors);
}
else
{
var connectors = ConnectorHelper.ConnectShapes(active_page, fromshapes, toshapes, master);
return(connectors);
}
}
}
public static void ConnectorsToBack()
{
var doc = SampleEnvironment.Application.ActiveDocument;
var pages = doc.Pages;
var page = pages.Add();
// get the data and the labels to use
var data = new double[] { 1, 2, 3, 4, 5, 6 };
var radius = 3.0;
var center = new VA.Drawing.Point(4, 4);
var slices = VA.Models.Charting.PieSlice.GetSlicesFromValues(center, radius, data);
foreach (var slice in slices)
{
slice.Render(page);
}
// based on this example: http://www.visguy.com/2009/06/17/send-all-connectors-to-back/
var stencil = SampleEnvironment.Application.Documents.OpenStencil("basic_u.vss");
var master = stencil.Masters["Dynamic Connector"];
var connector = page.Drop(master, 0, 0);
var r1 = page.DrawRectangle(0, 1, 2, 2);
var r2 = page.DrawRectangle(7, 7, 8, 8);
ConnectorHelper.ConnectShapes(connector, r1, r2);
var con_layer = page.Layers["Connector"];
var sel = page.CreateSelection(
IVisio.VisSelectionTypes.visSelTypeByLayer,
IVisio.VisSelectMode.visSelModeSkipSub,
con_layer);
sel.SendToBack();
}