private void Button5_Click(object sender, EventArgs e)
{
DocumentLock documentLock = Application.DocumentManager.MdiActiveDocument.LockDocument();
this.Hide();
Point3d point = CAD.GetPoint("选择插入点: ");
checked
{
Point3d point3d;
if (!(point == point3d))
{
Point3d pointXY = CAD.GetPointXY(point, 50.0, -50.0);
string text = this.TextBox1.Text;
text = Strings.Replace(text, "\r\n", "&", 1, -1, CompareMethod.Binary);
int num = (int)this.inStr_n(text, "&");
string[] array_ = new string[1];
Class36.smethod_44(text, ref array_, "&");
Class36.smethod_20(CAD.GetPointAngle(pointXY, 100.0, 0.0), array_, 300.0, 1.2, "");
pointXY = CAD.GetPointXY(point, 3550.0, -50.0);
text = this.TextBox2.Text;
text = Strings.Replace(text, "\r\n", "&", 1, -1, CompareMethod.Binary);
num = (int)Math.Max(unchecked ((long)num), this.inStr_n(text, "&"));
array_ = new string[1];
Class36.smethod_44(text, ref array_, "&");
Class36.smethod_20(CAD.GetPointAngle(pointXY, 100.0, 0.0), array_, 300.0, 1.2, "");
pointXY = CAD.GetPointXY(point, 13050.0, -50.0);
text = this.TextBox3.Text;
text = Strings.Replace(text, "\r\n", "&", 1, -1, CompareMethod.Binary);
num = (int)Math.Max(unchecked ((long)num), this.inStr_n(text, "&"));
array_ = new string[1];
Class36.smethod_44(text, ref array_, "&");
Class36.smethod_20(CAD.GetPointAngle(pointXY, 100.0, 0.0), array_, 300.0, 1.2, "");
if (num < 1)
{
num = 1;
}
num++;
CAD.AddPlinePxy(point, 20000.0, (double)((0 - num) * 500), 0.0, "");
pointXY = CAD.GetPointXY(point, 3500.0, 0.0);
Point3d pointXY2 = CAD.GetPointXY(point, 3500.0, (double)((0 - num) * 500));
CAD.AddLine(pointXY, pointXY2, "0");
pointXY = CAD.GetPointXY(point, 13000.0, 0.0);
pointXY2 = CAD.GetPointXY(point, 13000.0, (double)((0 - num) * 500));
CAD.AddLine(pointXY, pointXY2, "0");
documentLock.Dispose();
this.Show();
}
}
}
public void TcZJM()
{
TcZJM_Frm tcZJM_Frm = new TcZJM_Frm();
tcZJM_Frm.ShowDialog();
checked
{
if (tcZJM_Frm.DialogResult == DialogResult.OK)
{
CAD.CreateLayer("柱截面", 2, "continuous", -1, false, true);
CAD.CreateLayer("柱截面文字", 4, "continuous", -1, false, true);
string text = tcZJM_Frm.ComboBox1.Text;
double num;
if (Operators.CompareString(text, "1:20", false) == 0)
{
num = 5.0;
}
else if (Operators.CompareString(text, "1:25", false) == 0)
{
num = 4.0;
}
else if (Operators.CompareString(text, "1:30", false) == 0)
{
num = 3.3333333333333335;
}
else if (Operators.CompareString(text, "1:40", false) == 0)
{
num = 2.5;
}
else if (Operators.CompareString(text, "1:50", false) == 0)
{
num = 2.0;
}
if (tcZJM_Frm.RadioButton1.Checked)
{
string text2 = tcZJM_Frm.TextBox1.Text;
string text3 = tcZJM_Frm.TextBox2.Text.ToUpper();
string text4 = tcZJM_Frm.TextBox3.Text;
string text5 = tcZJM_Frm.TextBox4.Text;
string text6 = tcZJM_Frm.TextBox5.Text;
string text7 = tcZJM_Frm.TextBox6.Text;
object instance = text3.Split(new char[]
{
'X'
});
long num2 = Conversions.ToLong(NewLateBinding.LateIndexGet(instance, new object[]
{
0
}, null));
long num3 = Conversions.ToLong(NewLateBinding.LateIndexGet(instance, new object[]
{
1
}, null));
long num4 = (long)Math.Round(unchecked ((double)num2 * num));
long num5 = (long)Math.Round(unchecked ((double)num3 * num));
Point3d point = CAD.GetPoint("选择插入点: ");
Point3d point3d;
if (!(point == point3d))
{
Point3d pointXY = CAD.GetPointXY(point, (double)num4 / 2.0, (double)num5 / 2.0);
Point3d pointXY2 = CAD.GetPointXY(point, (double)(0L - num4) / 2.0, (double)num5 / 2.0);
Point3d pointXY3 = CAD.GetPointXY(point, (double)(0L - num4) / 2.0, (double)(0L - num5) / 2.0);
Point3d pointXY4 = CAD.GetPointXY(point, (double)num4 / 2.0, (double)(0L - num5) / 2.0);
ObjectId id = CAD.AddPlinePxy(pointXY3, (double)num4, (double)num5, 0.0, "").ObjectId;
CAD.ChangeLayer(id, "柱截面");
double num6 = 185.0;
Point3d pointXY5 = CAD.GetPointXY(pointXY, (double)-185f, (double)-185f);
Point3d pointXY6 = CAD.GetPointXY(pointXY2, num6, (double)-185f);
Point3d pointXY7 = CAD.GetPointXY(pointXY3, num6, num6);
Point3d pointXY8 = CAD.GetPointXY(pointXY4, (double)-185f, num6);
num6 = 50.0;
Class36.smethod_16(pointXY5, num6, "墙柱纵筋");
Class36.smethod_16(pointXY6, num6, "墙柱纵筋");
Class36.smethod_16(pointXY7, num6, "墙柱纵筋");
Class36.smethod_16(pointXY8, num6, "墙柱纵筋");
Class36.smethod_10(pointXY7, pointXY5, 5.0);
Point3d[] array = null;
Point3d[] array2 = null;
short num8;
if (Operators.CompareString(text6, "", false) != 0 & Operators.CompareString(text6, "0", false) != 0)
{
short num7 = (short)Strings.InStr(text6, "+", CompareMethod.Binary);
if (num7 > 0)
{
num8 = (short)Math.Round(unchecked (Conversion.Val(text6.Substring(0, 1)) + Conversion.Val(text6.Substring((int)num7, 1))));
}
else
{
num8 = (short)Math.Round(Conversion.Val(text6.Substring(0, 1)));
}
array = new Point3d[(int)(num8 - 1 + 1)];
array2 = new Point3d[(int)(num8 - 1 + 1)];
long num9 = (long)Math.Round((double)(num4 - 370L) / (double)(num8 + 1));
int num10 = 0;
int num11 = (int)(num8 - 1);
int num12 = num10;
for (;;)
{
int num13 = num12;
int num14 = num11;
if (num13 > num14)
{
break;
}
array[num12] = CAD.GetPointXY(pointXY6, (double)(num9 *unchecked ((long)(checked (num12 + 1)))), 0.0);
Class36.smethod_16(array[num12], 50.0, "墙柱纵筋");
array2[num12] = CAD.GetPointXY(pointXY7, (double)(num9 *unchecked ((long)(checked (num12 + 1)))), 0.0);
Class36.smethod_16(array2[num12], 50.0, "墙柱纵筋");
num12++;
}
}
Point3d[] array3 = null;
Point3d[] array4 = null;
int num16;
if (Operators.CompareString(text7, "", false) != 0 & Operators.CompareString(text7, "0", false) != 0)
{
short num15 = (short)Strings.InStr(text7, "+", CompareMethod.Binary);
if (num15 > 0)
{
num16 = (int)Math.Round(unchecked (Conversion.Val(text7.Substring(0, 1)) + Conversion.Val(text7.Substring((int)num15, 1))));
}
else
{
num16 = (int)Math.Round(Conversion.Val(text7.Substring(0, 1)));
}
array3 = new Point3d[num16 - 1 + 1];
array4 = new Point3d[num16 - 1 + 1];
long num17 = (long)Math.Round((double)(num5 - 370L) / (double)(num16 + 1));
int num18 = 0;
int num19 = num16 - 1;
int num20 = num18;
for (;;)
{
int num21 = num20;
int num14 = num19;
if (num21 > num14)
{
break;
}
array3[num20] = CAD.GetPointXY(pointXY6, 0.0, (double)((0L - num17) *unchecked ((long)(checked (num20 + 1)))));
Class36.smethod_16(array3[num20], 50.0, "墙柱纵筋");
array4[num20] = CAD.GetPointXY(pointXY5, 0.0, (double)((0L - num17) *unchecked ((long)(checked (num20 + 1)))));
Class36.smethod_16(array4[num20], 50.0, "墙柱纵筋");
num20++;
}
}
string[] array_ = new string[]
{
text2,
text3,
text4.Replace("D", "%%132"),
text5.Replace("D", "%%132")
};
Point3d pointXY9 = CAD.GetPointXY(pointXY, -100.0, 2000.0);
ObjectId[] array5 = Class36.smethod_20(pointXY9, array_, 300.0, 1.4, "");
foreach (ObjectId id in array5)
{
CAD.ChangeLayer(id, "柱截面文字");
}
id = CAD.AddLine(CAD.GetPointXY(pointXY, -200.0, 0.0), CAD.GetPointXY(pointXY, -200.0, 1900.0), "0").ObjectId;
CAD.ChangeLayer(id, "柱截面文字");
unchecked
{
if (Operators.CompareString(text6, "", false) != 0 & Operators.CompareString(text6, "0", false) != 0)
{
pointXY9..ctor((pointXY.X + pointXY2.X) / 2.0, pointXY.Y + 150.0, 0.0);
id = Class36.smethod_57(text6.Replace("D", "%%132"), pointXY9, 300.0, 1, 0, "STANDARD", 0.0);
CAD.ChangeLayer(id, "柱截面文字");
}
if (Operators.CompareString(text7, "", false) != 0 & Operators.CompareString(text7, "0", false) != 0)
{
pointXY9..ctor(pointXY2.X - 150.0, (pointXY2.Y + pointXY3.Y) / 2.0, 0.0);
id = Class36.smethod_57(text7.Replace("D", "%%132"), pointXY9, 300.0, 1, 0, "STANDARD", 1.5707963267948966);
CAD.ChangeLayer(id, "柱截面文字");
}
object obj = CAD.CreateTextStyle("Tc_尺寸标注", "txt.shx", "hztxt.Shx", 0.7);
string dimStyleName = "Tc_Dim100";
object obj2 = obj;
ObjectId objectId;
ObjectId dimID = CAD.CreateDimStyle(dimStyleName, (obj2 != null) ? ((ObjectId)obj2) : objectId, 100, 1.0, false, -1.0);
pointXY9 = CAD.GetPointXY(pointXY, 600.0, 0.0);
CAD.AddLineDim(pointXY, pointXY4, pointXY9, 1.0 / num, dimID, -1.0);
pointXY9 = CAD.GetPointXY(pointXY3, 0.0, -600.0);
CAD.AddLineDim(pointXY3, pointXY4, pointXY9, 1.0 / num, dimID, -1.0);
if (num2 > 300L)
{
if (num8 == 1)
{
Class36.smethod_8(array[0], array2[0], 5.0);
}
else if (num8 == 2)
{
Class36.smethod_10(array[0], array2[1], 5.0);
}
else if (num8 == 3)
{
Class36.smethod_10(array[0], array2[2], 5.0);
Class36.smethod_8(array[1], array2[1], 5.0);
}
else if (num8 == 4)
{
Class36.smethod_10(array[0], array2[1], 5.0);
Class36.smethod_10(array[2], array2[3], 5.0);
}
else if (num8 == 5)
{
Class36.smethod_10(array[1], array2[3], 5.0);
Class36.smethod_8(array[2], array2[2], 5.0);
}
else if (num8 == 6)
{
Class36.smethod_10(array[1], array2[2], 5.0);
Class36.smethod_10(array[3], array2[4], 5.0);
}
else if (num8 >= 7)
{
Class36.smethod_10(array[1], array2[2], 5.0);
Class36.smethod_10(array[4], array2[5], 5.0);
}
}
if (num3 > 300L)
{
if (num16 == 1)
{
Class36.smethod_8(array3[0], array4[0], 5.0);
}
else if (num16 == 2)
{
Class36.smethod_10(array3[0], array4[1], 5.0);
}
else if (num16 == 3)
{
Class36.smethod_10(array3[0], array4[2], 5.0);
Class36.smethod_8(array3[1], array4[1], 5.0);
}
else if (num16 == 4)
{
Class36.smethod_10(array3[0], array4[1], 5.0);
Class36.smethod_10(array3[2], array4[3], 5.0);
}
else if (num16 == 5)
{
Class36.smethod_10(array3[1], array4[3], 5.0);
Class36.smethod_8(array3[2], array4[2], 5.0);
}
else if (num16 == 6)
{
Class36.smethod_10(array3[1], array4[2], 5.0);
Class36.smethod_10(array3[3], array4[4], 5.0);
}
else if (num16 >= 7)
{
Class36.smethod_10(array3[1], array4[2], 5.0);
Class36.smethod_10(array3[4], array4[5], 5.0);
}
}
pointXY9 = CAD.GetPointXY(point, -400.0, (double)(checked (0L - num5)) / 2.0 - 2500.0);
Class36.smethod_6(pointXY9, text2, 100.0, tcZJM_Frm.ComboBox1.Text);
}
}
}
else
{
string text8 = tcZJM_Frm.TextBox1.Text;
string text9 = tcZJM_Frm.TextBox2.Text.ToUpper();
string text10 = tcZJM_Frm.TextBox3.Text;
string text11 = tcZJM_Frm.TextBox4.Text;
long num22 = (long)Math.Round(Conversion.Val(text9));
long num23 = (long)Math.Round((double)num22 / 2.0);
object obj3 = Strings.InStr(text10, "D", CompareMethod.Binary);
int num24 = (int)Math.Round(Conversion.Val(text10.Substring(0, Conversions.ToInteger(Operators.SubtractObject(obj3, 1)))));
Point3d point2 = CAD.GetPoint("选择插入点: ");
Point3d point3d;
if (!(point2 == point3d))
{
ObjectId id2 = CAD.AddCircle(point2, unchecked ((double)num23 * num), "").ObjectId;
CAD.ChangeLayer(id2, "柱截面");
CAD.CreateLayer("箍筋", 1, "continuous", -1, false, true);
CAD.CreateLayer("柱截面文字", 4, "continuous", -1, false, true);
long num25 = (long)Math.Round(unchecked ((double)num23 * num - 85.0));
Point3d point3d2 = CAD.GetPointXY(point2, 0.0, (double)num25);
Polyline polyline = new Polyline();
obj3 = Math.Tan(0.78539816339744828);
polyline.AddVertexAt(0, Class36.smethod_38(point3d2), Conversions.ToDouble(obj3), (double)45f, (double)45f);
point3d2 = CAD.GetPointXY(point3d2, 0.0, (double)(-2L * num25));
polyline.AddVertexAt(1, Class36.smethod_38(point3d2), Conversions.ToDouble(obj3), (double)45f, (double)45f);
point3d2 = CAD.GetPointXY(point3d2, 0.0, (double)(2L * num25));
obj3 = Math.Tan(0.52359877559829882);
polyline.AddVertexAt(2, Class36.smethod_38(point3d2), Conversions.ToDouble(obj3), (double)45f, (double)45f);
point3d2 = CAD.GetPointAngle(point3d2, 185.0, 247.5);
polyline.AddVertexAt(3, Class36.smethod_38(point3d2), 0.0, (double)45f, (double)45f);
point3d2 = CAD.GetPointAngle(point3d2, 100.0, -45.0);
polyline.AddVertexAt(4, Class36.smethod_38(point3d2), 0.0, (double)45f, (double)45f);
id2 = CAD.AddEnt(polyline).ObjectId;
CAD.ChangeLayer(id2, "箍筋");
int num26 = 0;
int num27 = num24 - 1;
int num28 = num26;
for (;;)
{
int num29 = num28;
int num14 = num27;
if (num29 > num14)
{
break;
}
point3d2 = unchecked (CAD.GetPointAngle(point2, (double)num23 * num - 185.0, 360.0 / (double)num24 * (double)num28 + 90.0));
Class36.smethod_16(point3d2, 50.0, "墙柱纵筋");
num28++;
}
ObjectId style = Class36.smethod_78("Dim100", 100, 1.0, false);
unchecked
{
Point3d pointXY10 = CAD.GetPointXY(point2, (double)(checked (0L - num23)) * num, (double)(checked (0L - num23)) * num);
Point3d pointXY11 = CAD.GetPointXY(point2, (double)num23 * num, (double)(checked (0L - num23)) * num);
point3d2 = CAD.GetPointXY(point2, 0.0, (double)(checked (0L - num23 - 200L)) * num);
id2 = ModelSpace.AddDimAligned1(pointXY10, pointXY11, point3d2, Conversions.ToString(num22), style);
pointXY10 = CAD.GetPointXY(point2, (double)(checked (0L - num23)) * num, (double)num23 * num);
pointXY11 = CAD.GetPointXY(point2, (double)(checked (0L - num23)) * num, (double)(checked (0L - num23)) * num);
point3d2 = CAD.GetPointXY(point2, (double)(checked (0L - num23 - 200L)) * num, 0.0);
id2 = ModelSpace.AddDimAligned1(pointXY10, pointXY11, point3d2, Conversions.ToString(num22), style);
string[] array_2 = new string[]
{
text8,
text9,
text10.Replace("D", "%%132"),
text11.Replace("D", "%%132")
};
point3d2 = CAD.GetPointXY(point2, (double)num23 * num + 100.0, 1800.0 + (double)num23 * num);
ObjectId[] array7 = Class36.smethod_20(point3d2, array_2, 300.0, 1.4, "");
foreach (ObjectId id2 in array7)
{
CAD.ChangeLayer(id2, "柱截面文字");
}
id2 = CAD.AddLine(CAD.GetPointXY(point2, (double)num23 * num * 0.714, (double)num23 * num * 0.714), CAD.GetPointXY(point2, ((double)num23 * num + 500.0) * 0.714, ((double)num23 * num + 500.0) * 0.714), "0").ObjectId;
CAD.ChangeLayer(id2, "柱截面文字");
point3d2 = CAD.GetPointXY(point2, -80.0 * num, (double)(checked (0L - num23 - 500L)) * num);
Class36.smethod_6(point3d2, text8, 100.0, "1:20");
}
}
}
}
}
}
public void TcLJM()
{
LJM_Frm ljm_Frm = new LJM_Frm();
ljm_Frm.ShowDialog();
checked
{
if (ljm_Frm.DialogResult == DialogResult.OK)
{
string text = ljm_Frm.TextBox1.Text;
text = text.Replace("\\", "/");
text = text.Replace(" ", "/");
text = text.Replace(",", "/");
text = text.Replace("，", "/");
text = text.Replace("、", "/");
int num = Strings.InStr(text, "/", CompareMethod.Binary);
long num2 = (long)Math.Round(unchecked (Conversion.Val(text.Substring(0, checked (num - 1))) * 5.0));
long num3 = (long)Math.Round(unchecked (Conversion.Val(text.Substring(num, checked (text.Length - num))) * 5.0));
Point3d point = CAD.GetPoint("选择插入点: ");
Point3d point3d;
if (!(point == point3d))
{
Point3d pointXY = CAD.GetPointXY(point, (double)num2 / 2.0, (double)num3 / 2.0);
Point3d pointXY2 = CAD.GetPointXY(point, (double)(0L - num2) / 2.0, (double)num3 / 2.0);
Point3d pointXY3 = CAD.GetPointXY(point, (double)(0L - num2) / 2.0, (double)(0L - num3) / 2.0);
Point3d pointXY4 = CAD.GetPointXY(point, (double)num2 / 2.0, (double)(0L - num3) / 2.0);
Point3d pointAngle = CAD.GetPointAngle(pointXY, 250.0, -135.0);
Point3d point3d2 = CAD.GetPointAngle(pointXY2, 250.0, -45.0);
Point3d pointAngle2 = CAD.GetPointAngle(pointXY3, 250.0, 45.0);
Point3d pointAngle3 = CAD.GetPointAngle(pointXY4, 250.0, 135.0);
Point3d pointXY5 = CAD.GetPointXY(point, (double)(0L - num2) / 2.0, (double)(0L - num3) / 2.0);
CAD.AddPlinePxy(pointXY5, (double)num2, (double)num3, 0.0, "");
text = JG.ReplaceGJ(ljm_Frm.TextBox2.Text);
num = NF.InStr_N(text, "/");
Point3d[] array;
Point3d[] array2;
if (num == 1)
{
short num4 = (short)Strings.InStr(text, "/", CompareMethod.Binary);
short num5 = (short)Math.Round(Conversion.Val(text.Substring((int)(num4 - 9), 1)));
short num6 = (short)Math.Round(Conversion.Val(text.Substring((int)num4, 1)));
array = new Point3d[(int)(unchecked (num5 + num6) - 1 + 1)];
array2 = new Point3d[(int)(num5 - 3 + 1)];
array[0] = point3d2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(unchecked (num5 + num6) - 1)] = pointAngle;
Class36.smethod_16(array[(int)(unchecked (num5 + num6) - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num5 - 2 + 1));
short num7 = 1;
short num8 = num5 - 2;
num4 = num7;
for (;;)
{
short num9 = num4;
short num10 = num8;
if (num9 > num10)
{
break;
}
array[(int)num4] = CAD.GetPointXY(array[0], (double)(num * (int)num4), 0.0);
Class36.smethod_16(array[(int)num4], 50.0, "墙柱纵筋");
array2[(int)(num4 - 1)] = array[(int)num4];
unchecked
{
num4 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num6 - 1));
short num11 = num5;
short num12 = unchecked (num5 + num6) - 1;
num4 = num11;
for (;;)
{
short num13 = num4;
short num10 = num12;
if (num13 > num10)
{
break;
}
array[(int)num4] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num4 - num5))), -150.0);
Class36.smethod_16(array[(int)num4], 50.0, "墙柱纵筋");
unchecked
{
num4 += 1;
}
}
Class36.smethod_83(array, 500L, text, 1, 100.0);
}
else if (num == 2)
{
short num14 = (short)Strings.InStr(text, "/", CompareMethod.Binary);
short num15 = (short)Math.Round(Conversion.Val(text.Substring((int)(num14 - 9), 1)));
short num16 = (short)Math.Round(Conversion.Val(text.Substring((int)num14, 1)));
short num17 = (short)Math.Round(Conversion.Val(text.Substring((int)(num14 + 9), 1)));
array = new Point3d[(int)(unchecked (num15 + num16 + num17) - 1 + 1)];
array2 = new Point3d[(int)(num15 - 3 + 1)];
array[0] = point3d2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(unchecked (num15 + num16 + num17) - 1)] = pointAngle;
Class36.smethod_16(array[(int)(unchecked (num15 + num16 + num17) - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num15 - 2 + 1));
short num18 = 1;
short num19 = num15 - 2;
num14 = num18;
for (;;)
{
short num20 = num14;
short num10 = num19;
if (num20 > num10)
{
break;
}
array[(int)num14] = CAD.GetPointXY(array[0], (double)(num * (int)num14), 0.0);
Class36.smethod_16(array[(int)num14], 50.0, "墙柱纵筋");
array2[(int)(num14 - 1)] = array[(int)num14];
unchecked
{
num14 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num16 - 1));
short num21 = num15;
short num22 = unchecked (num15 + num16) - 1;
num14 = num21;
for (;;)
{
short num23 = num14;
short num10 = num22;
if (num23 > num10)
{
break;
}
array[(int)num14] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num14 - num15))), -150.0);
Class36.smethod_16(array[(int)num14], 50.0, "墙柱纵筋");
unchecked
{
num14 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num17 - 1));
short num24 = unchecked (num15 + num16);
short num25 = unchecked (num15 + num16 + num17) - 1;
num14 = num24;
for (;;)
{
short num26 = num14;
short num10 = num25;
if (num26 > num10)
{
break;
}
array[(int)num14] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num14 - num15 - num16))), -300.0);
Class36.smethod_16(array[(int)num14], 50.0, "墙柱纵筋");
unchecked
{
num14 += 1;
}
}
Class36.smethod_83(array, 500L, text, 1, 100.0);
}
else
{
short num27 = (short)Strings.InStr(text, "+", CompareMethod.Binary);
short num28;
if (num27 > 0)
{
num28 = (short)Math.Round(unchecked (Conversion.Val(text.Substring((int)(checked (num27 - 9)), 1)) + Conversion.Val(text.Substring((int)num27, 1))));
}
else
{
num28 = (short)Math.Round(Conversion.Val(text.Substring(0, 1)));
}
array = new Point3d[(int)(num28 - 1 + 1)];
array2 = new Point3d[(int)(num28 - 3 + 1)];
array[0] = point3d2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(num28 - 1)] = pointAngle;
Class36.smethod_16(array[(int)(num28 - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num28 - 2 + 1));
short num29 = 1;
short num30 = num28 - 2;
num27 = num29;
for (;;)
{
short num31 = num27;
short num10 = num30;
if (num31 > num10)
{
break;
}
array[(int)num27] = CAD.GetPointXY(array[0], (double)(num * (int)num27), 0.0);
Class36.smethod_16(array[(int)num27], 50.0, "墙柱纵筋");
array2[(int)(num27 - 1)] = array[(int)num27];
unchecked
{
num27 += 1;
}
}
Class36.smethod_83(array, 500L, text, 1, 100.0);
}
text = JG.ReplaceGJ(ljm_Frm.TextBox3.Text);
num = NF.InStr_N(text, "/");
if (num == 1)
{
short num32 = (short)Strings.InStr(text, "/", CompareMethod.Binary);
short num33 = (short)Math.Round(Conversion.Val(text.Substring((int)(num32 - 9), 1)));
short num34 = (short)Math.Round(Conversion.Val(text.Substring((int)num32, 1)));
array = new Point3d[(int)(unchecked (num34 + num33) - 1 + 1)];
array[0] = pointAngle2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(unchecked (num34 + num33) - 1)] = pointAngle3;
Class36.smethod_16(array[(int)(unchecked (num34 + num33) - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num34 - 2 + 1));
short num35 = 1;
short num36 = num34 - 2;
num32 = num35;
for (;;)
{
short num37 = num32;
short num10 = num36;
if (num37 > num10)
{
break;
}
array[(int)num32] = CAD.GetPointXY(array[0], (double)(num * (int)num32), 0.0);
Class36.smethod_16(array[(int)num32], 50.0, "墙柱纵筋");
unchecked
{
num32 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num33 - 1));
short num38 = num34;
short num39 = unchecked (num34 + num33) - 1;
num32 = num38;
for (;;)
{
short num40 = num32;
short num10 = num39;
if (num40 > num10)
{
break;
}
array[(int)num32] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num32 - num34))), 150.0);
Class36.smethod_16(array[(int)num32], 50.0, "墙柱纵筋");
unchecked
{
num32 += 1;
}
}
Class36.smethod_83(array, 500L, text, 4, 100.0);
}
else if (num == 2)
{
short num41 = (short)Strings.InStr(text, "/", CompareMethod.Binary);
short num42 = (short)Math.Round(Conversion.Val(text.Substring((int)(num41 - 9), 1)));
short num43 = (short)Math.Round(Conversion.Val(text.Substring((int)num41, 1)));
short num44 = (short)Math.Round(Conversion.Val(text.Substring((int)(num41 + 9), 1)));
array = new Point3d[(int)(unchecked (num44 + num43 + num42) - 1 + 1)];
array[0] = pointAngle2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(unchecked (num44 + num43 + num42) - 1)] = pointAngle3;
Class36.smethod_16(array[(int)(unchecked (num44 + num43 + num42) - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num44 - 2 + 1));
short num45 = 1;
short num46 = num44 - 2;
num41 = num45;
for (;;)
{
short num47 = num41;
short num10 = num46;
if (num47 > num10)
{
break;
}
array[(int)num41] = CAD.GetPointXY(array[0], (double)(num * (int)num41), 0.0);
Class36.smethod_16(array[(int)num41], 50.0, "墙柱纵筋");
unchecked
{
num41 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num43 - 1));
short num48 = num44;
short num49 = unchecked (num44 + num43) - 1;
num41 = num48;
for (;;)
{
short num50 = num41;
short num10 = num49;
if (num50 > num10)
{
break;
}
array[(int)num41] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num41 - num44))), 150.0);
Class36.smethod_16(array[(int)num41], 50.0, "墙柱纵筋");
unchecked
{
num41 += 1;
}
}
num = (int)Math.Round((double)(num2 - 354L) / (double)(num42 - 1));
short num51 = unchecked (num44 + num43);
short num52 = unchecked (num44 + num43 + num42) - 1;
num41 = num51;
for (;;)
{
short num53 = num41;
short num10 = num52;
if (num53 > num10)
{
break;
}
array[(int)num41] = CAD.GetPointXY(array[0], (double)(num * (int)(unchecked (num41 - num44 - num43))), 300.0);
Class36.smethod_16(array[(int)num41], 50.0, "墙柱纵筋");
unchecked
{
num41 += 1;
}
}
Class36.smethod_83(array, 500L, text, 4, 100.0);
}
else
{
short num54 = (short)Strings.InStr(text, "+", CompareMethod.Binary);
short num55;
if (num54 > 0)
{
num55 = (short)Math.Round(unchecked (Conversion.Val(text.Substring((int)(checked (num54 - 9)), 1)) + Conversion.Val(text.Substring((int)num54, 1))));
}
else
{
num55 = (short)Math.Round(Conversion.Val(text.Substring(0, 1)));
}
array = new Point3d[(int)(num55 - 1 + 1)];
array[0] = pointAngle2;
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[(int)(num55 - 1)] = pointAngle3;
Class36.smethod_16(array[(int)(num55 - 1)], 50.0, "墙柱纵筋");
num = (int)Math.Round((double)(num2 - 354L) / (double)(num55 - 2 + 1));
short num56 = 1;
short num57 = num55 - 2;
num54 = num56;
for (;;)
{
short num58 = num54;
short num10 = num57;
if (num58 > num10)
{
break;
}
array[(int)num54] = CAD.GetPointXY(array[0], (double)(num * (int)num54), 0.0);
Class36.smethod_16(array[(int)num54], 50.0, "墙柱纵筋");
unchecked
{
num54 += 1;
}
}
Class36.smethod_83(array, 500L, text, 4, 100.0);
}
object obj = CAD.CreateTextStyle("Tc_尺寸标注", "txt.shx", "hztxt.Shx", 0.7);
string dimStyleName = "Tc_Dim100";
object obj2 = obj;
ObjectId objectId;
ObjectId dimID = CAD.CreateDimStyle(dimStyleName, (obj2 != null) ? ((ObjectId)obj2) : objectId, 100, 1.0, false, -1.0);
unchecked
{
pointXY5 = CAD.GetPointXY(point, (double)(checked (0L - num2)) / 2.0 - 500.0, 0.0);
CAD.AddLineDim(pointXY2, pointXY3, pointXY5, 0.2, dimID, -1.0);
pointXY5 = CAD.GetPointXY(point, 0.0, (double)(checked (0L - num3)) / 2.0 - 1000.0);
CAD.AddLineDim(pointXY3, pointXY4, pointXY5, 0.2, dimID, -1.0);
string string_;
if (Conversions.ToDouble(ljm_Frm.TextBox7.Text) == 0.0)
{
string_ = "%%p0.000";
}
else
{
string_ = ljm_Frm.TextBox7.Text;
}
if (Operators.CompareString(ljm_Frm.Button1.Text, "顶部标高", false) == 0)
{
pointXY5 = CAD.GetPointXY(point, (double)(checked (0L - num2)) / 2.0 - 650.0, (double)num3 / 2.0);
Class36.smethod_81(pointXY5, 2, 1.0);
pointXY5 = CAD.GetPointXY(pointXY5, -300.0, 350.0);
Class36.smethod_57(string_, pointXY5, 300.0, 2, 0, "STANDARD", 0.0);
}
else
{
pointXY5 = CAD.GetPointXY(point, (double)(checked (0L - num2)) / 2.0 - 650.0, (double)(checked (0L - num3)) / 2.0);
Class36.smethod_81(pointXY5, 3, 1.0);
pointXY5 = CAD.GetPointXY(pointXY5, -300.0, -350.0);
Class36.smethod_57(string_, pointXY5, 300.0, 2, 3, "STANDARD", 0.0);
}
}
if (Operators.CompareString(ljm_Frm.TextBox5.Text, "", false) != 0)
{
text = JG.ReplaceGJ(ljm_Frm.TextBox5.Text);
num = (int)Math.Round(Conversion.Val(text.Substring(0, 1)));
if (num % 2 == 0)
{
num = (int)Math.Round((double)num / 2.0);
text = Conversions.ToString(2) + text.Substring(1, text.Length - 1);
short num59 = 0;
short num60 = (short)(num - 1);
short num61 = num59;
unchecked
{
for (;;)
{
short num62 = num61;
short num10 = num60;
if (num62 > num10)
{
break;
}
array = new Point3d[3];
array[0] = CAD.GetPointXY(pointAngle2, 0.0, checked ((double)(num3 - 354L) / (double)(num + 1)) * (double)(checked (num61 + 1)));
Class36.smethod_16(array[0], 50.0, "墙柱纵筋");
array[2] = CAD.GetPointXY(pointAngle3, 0.0, checked ((double)(num3 - 354L) / (double)(num + 1)) * (double)(checked (num61 + 1)));
Class36.smethod_16(array[2], 50.0, "墙柱纵筋");
Class36.smethod_7(array[0], array[2]);
array[1] = Class36.smethod_46(array[0], array[2]);
array[1] = CAD.GetPointXY(array[1], 0.0, 74.0);
Class36.smethod_83(array, 300L, text, 1, 100.0);
num61 += 1;
}
}
}
}
else
{
num = 2;
}
pointAngle = CAD.GetPointAngle(pointXY2, 100.0, -45.0);
point3d2 = CAD.GetPointAngle(pointXY4, 100.0, 135.0);
Class36.smethod_9(pointAngle, point3d2);
array = new Point3d[]
{
CAD.GetPointXY(point3d2, 0.0, (double)(num3 - 354L) / unchecked ((double)num / 2.0 + 1.0) / 2.0)
};
text = JG.ReplaceGJ(ljm_Frm.TextBox4.Text);
Class36.smethod_83(array, 0L, text, 1, 100.0);
num = Strings.InStr(text, "(", CompareMethod.Binary);
if (num != 0)
{
short num63 = Conversions.ToShort(text.Substring(num, 1));
if (num63 == 3)
{
Class36.smethod_7(array2[0], CAD.GetPointXY(array2[0], 0.0, (double)(0L - num3 + 354L)));
}
else if (num63 == 4)
{
pointAngle = CAD.GetPointAngle(array2[0], 150.0, 135.0);
point3d2 = CAD.GetPointXY(array2[0], unchecked (array2[1].X - array2[0].X), (double)(0L - num3 + 354L));
point3d2 = CAD.GetPointAngle(point3d2, 150.0, -45.0);
Class36.smethod_9(pointAngle, point3d2);
}
}
pointXY5 = CAD.GetPointXY(point, -400.0, unchecked ((double)(checked (0L - num3)) / 2.0 - 2500.0));
Class36.smethod_6(pointXY5, "L1", 100.0, "1:20");
}
}
}
}
public void TcDZK()
{
CAD.CreateLayer("打砖块-墙", 1, "continuous", 30, false, false);
CAD.CreateLayer("打砖块-砖2", 2, "continuous", 30, false, false);
CAD.CreateLayer("打砖块-砖6", 6, "continuous", 30, false, false);
CAD.CreateLayer("打砖块-球1", 3, "continuous", 30, false, false);
CAD.CreateLayer("打砖块-球2", 4, "continuous", 30, false, false);
CAD.CreateLayer("打砖块-球3", 5, "continuous", 30, false, false);
CAD.CreateLayer("打砖块-球0", 8, "continuous", 30, false, false);
this.document_0.LockDocument();
this.double_0 = this.editor_0.GetCurrentView().Height;
this.double_0 *= 0.9;
this.double_1 = this.editor_0.GetCurrentView().Width;
this.double_1 *= 0.9;
this.point3d_0..ctor(this.editor_0.GetCurrentView().CenterPoint.X, this.editor_0.GetCurrentView().CenterPoint.Y, 0.0);
this.point3d_1..ctor(this.point3d_0.X + this.double_1 / 2.0, this.point3d_0.Y + this.double_0 / 2.0, 0.0);
this.point3d_2..ctor(this.point3d_0.X - this.double_1 / 2.0, this.point3d_0.Y + this.double_0 / 2.0, 0.0);
this.point3d_3..ctor(this.point3d_0.X - this.double_1 / 2.0, this.point3d_0.Y - this.double_0 / 2.0, 0.0);
this.point3d_4..ctor(this.point3d_0.X + this.double_1 / 2.0, this.point3d_0.Y - this.double_0 / 2.0, 0.0);
this.jipAtgRsh = CAD.AddPlinePxy(this.point3d_3, this.double_1, this.double_0, 0.0, "");
this.double_2 = this.double_1 / 80.0;
double num = this.double_1 / 20.0;
double num2 = num / 3.0;
this.dbobjectCollection_0 = new DBObjectCollection();
long num3 = 0L;
Point3d pointXY;
do
{
pointXY..ctor(this.point3d_2.X + (double)num3 * num, this.point3d_2.Y - num2, this.point3d_2.Z);
this.dbobjectCollection_0.Add(CAD.AddPlinePxy(pointXY, num, num2, 0.0, "打砖块-砖2"));
checked
{
num3 += 1L;
}
}while (num3 <= 19L);
long num4 = 0L;
do
{
pointXY..ctor(this.point3d_2.X + (double)num4 * num + num / 2.0, this.point3d_2.Y - 2.0 * num2, this.point3d_2.Z);
this.dbobjectCollection_0.Add(CAD.AddPlinePxy(pointXY, num, num2, 0.0, "打砖块-砖6"));
checked
{
num4 += 1L;
}
}while (num4 <= 18L);
long num5 = 0L;
do
{
pointXY..ctor(this.point3d_2.X + (double)num5 * num, this.point3d_2.Y - 3.0 * num2, this.point3d_2.Z);
this.dbobjectCollection_0.Add(CAD.AddPlinePxy(pointXY, num, num2, 0.0, "打砖块-砖2"));
checked
{
num5 += 1L;
}
}while (num5 <= 19L);
long num6 = 0L;
do
{
pointXY..ctor(this.point3d_2.X + (double)num6 * num + num / 2.0, this.point3d_2.Y - 4.0 * num2, this.point3d_2.Z);
this.dbobjectCollection_0.Add(CAD.AddPlinePxy(pointXY, num, num2, 0.0, "打砖块-砖6"));
checked
{
num6 += 1L;
}
}while (num6 <= 18L);
long num7 = 0L;
do
{
pointXY..ctor(this.point3d_2.X + (double)num7 * num, this.point3d_2.Y - 5.0 * num2, this.point3d_2.Z);
this.dbobjectCollection_0.Add(CAD.AddPlinePxy(pointXY, num, num2, 0.0, "打砖块-砖2"));
checked
{
num7 += 1L;
}
}while (num7 <= 19L);
Point3d point3d;
point3d..ctor(0.0, 0.0, 0.0);
this.polyline_0 = CAD.AddPlinePxy(this.point3d_3, this.double_2 * 10.0, 2.0 * this.double_2, 0.0, "打砖块-墙");
pointXY = CAD.GetPointXY(this.point3d_2, -this.double_2 * 1.1, -2.0 * this.double_2);
CAD.AddCircle(pointXY, this.double_2, "打砖块-球0");
this.circle_0 = CAD.AddCircle(pointXY, this.double_2, "打砖块-球1");
this.objectId_0 = Class36.smethod_57("1", pointXY, this.double_2, 4, 2, "STANDARD", 0.0);
pointXY = CAD.GetPointXY(this.point3d_2, -this.double_2 * 1.1, -4.0 * this.double_2);
CAD.AddCircle(pointXY, this.double_2, "打砖块-球0");
this.circle_1 = CAD.AddCircle(pointXY, this.double_2, "打砖块-球2");
this.objectId_1 = Class36.smethod_57("2", pointXY, this.double_2, 4, 2, "STANDARD", 0.0);
pointXY = CAD.GetPointXY(this.point3d_2, -this.double_2 * 1.1, -6.0 * this.double_2);
CAD.AddCircle(pointXY, this.double_2, "打砖块-球0");
this.circle_2 = CAD.AddCircle(pointXY, this.double_2, "打砖块-球3");
this.objectId_2 = Class36.smethod_57("3", pointXY, this.double_2, 4, 2, "STANDARD", 0.0);
pointXY = CAD.GetPointXY(this.point3d_2, this.double_2, 2.0 * this.double_2);
this.objectId_3 = Class36.smethod_23(pointXY, "0", 1.5 * this.double_2, 0, "打砖块-墙");
pointXY = CAD.GetPointXY(this.point3d_1, -3.0 * this.double_2, 2.0 * this.double_2);
this.objectId_4 = Class36.smethod_23(pointXY, "0", 1.5 * this.double_2, 0, "打砖块-墙");
Random random = new Random();
this.double_3 = 0.52359877559829882 + 2.0943951023931953 * random.NextDouble();
this.timer_0.Interval = 50;
this.timer_1.Interval = 1;
this.timer_0.Tick += this.timer1_Tick;
this.timer_1.Tick += this.timer2_Tick;
this.editor_0.PointMonitor += new PointMonitorEventHandler(this.GetMousePoint);
this.timer_0.Start();
this.timer_1.Start();
}
