public void writeDataScaled(byte[][,] raster, int componentIndex, BlockUpsamplingMode mode) { int x = 0, y = 0, lastblockheight = 0, incrementblock = 0; int blockIdx = 0; int w = raster[0].GetLength(0); //h = raster[0].GetLength(1); // Keep looping through all of the blocks until there are no more. while (blockIdx < scanDecoded.Count) { int blockwidth = 0; int blockheight = 0; if (x >= w) { x = 0; y += incrementblock; } // Loop through the horizontal component blocks of the MCU first // then for each horizontal line write out all of the vertical // components for (int factorVIndex = 0; factorVIndex < factorV; factorVIndex++) { blockwidth = 0; for (int factorHIndex = 0; factorHIndex < factorH; factorHIndex++) { // Captures the width of this block so we can increment the X coordinate byte[,] blockdata = scanDecoded[blockIdx++]; // Writes the data at the specific X and Y coordinate of this component writeBlockScaled(raster, blockdata, componentIndex, x, y, mode); blockwidth += blockdata.GetLength(1) * factorUpH; x += blockdata.GetLength(1) * factorUpH; blockheight = blockdata.GetLength(0) * factorUpV; } y += blockheight; x -= blockwidth; lastblockheight += blockheight; } y -= lastblockheight; incrementblock = lastblockheight; lastblockheight = 0; x += blockwidth; } }
public void writeDataScaled(byte[][,] raster, int componentIndex, BlockUpsamplingMode mode) { int x = 0; int y = 0; int num3 = 0; int num4 = 0; int num5 = 0; int length = raster[0].GetLength(0); int num7 = raster[0].GetLength(1); while (num5 < this.scanDecoded.Count) { int num8 = 0; int num9 = 0; if (x >= length) { x = 0; y += num4; } for (int i = 0; i < this.factorV; i++) { num8 = 0; for (int j = 0; j < this.factorH; j++) { byte[,] blockdata = this.scanDecoded[num5++]; this.writeBlockScaled(raster, blockdata, componentIndex, x, y, mode); num8 += blockdata.GetLength(1) * this.factorUpH; x += blockdata.GetLength(1) * this.factorUpH; num9 = blockdata.GetLength(0) * this.factorUpV; } y += num9; x -= num8; num3 += num9; } y -= num3; num4 = num3; num3 = 0; x += num8; } }
public void writeDataScaled(byte[][,] raster, int componentIndex, BlockUpsamplingMode mode) { int num = 0; int num2 = 0; int num3 = 0; int num4 = 0; int num5 = 0; int length = raster[0].GetLength(0); while (num5 < scanDecoded.Count) { int num6 = 0; int num7 = 0; if (num >= length) { num = 0; num2 += num4; } for (int i = 0; i < factorV; i++) { num6 = 0; for (int j = 0; j < factorH; j++) { byte[,] array = scanDecoded[num5++]; writeBlockScaled(raster, array, componentIndex, num, num2, mode); num6 += array.GetLength(1) * factorUpH; num += array.GetLength(1) * factorUpH; num7 = array.GetLength(0) * factorUpV; } num2 += num7; num -= num6; num3 += num7; } num2 -= num3; num4 = num3; num3 = 0; num += num6; } }
private void writeBlockScaled(byte[][,] raster, byte[,] blockdata, int compIndex, int x, int y, BlockUpsamplingMode mode) { int w = raster[0].GetLength(0), h = raster[0].GetLength(1); int factorUpVertical = factorUpV, factorUpHorizontal = factorUpH; int oldV = blockdata.GetLength(0), oldH = blockdata.GetLength(1), newV = oldV * factorUpVertical, newH = oldH * factorUpHorizontal; byte[,] comp = raster[compIndex]; // Blocks may spill over the frame so we bound by the frame size int yMax = newV; if ((y + yMax) > h) yMax = h - y; int xMax = newH; if ((x + xMax) > w) xMax = w - x; switch (mode) { case BlockUpsamplingMode.BoxFilter: #region Upsampling by repeating values // Special case 1: No scale-up if (factorUpVertical == 1 && factorUpHorizontal == 1) { for (int u = 0; u < xMax; u++) for (int v = 0; v < yMax; v++) comp[u + x, y + v] = blockdata[v, u]; } // Special case 2: Perform scale-up 4 pixels at a time else if (factorUpHorizontal == 2 && factorUpVertical == 2 && xMax == newH && yMax == newV) { for (int src_u = 0; src_u < oldH; src_u++) { int bx = src_u * 2 + x; for ( int src_v = 0; src_v < oldV; src_v++) { byte val = blockdata[src_v, src_u]; int by = src_v * 2 + y; comp[bx, by] = val; comp[bx, by + 1] = val; comp[bx + 1, by] = val; comp[bx + 1, by + 1] = val; } } } else { /* Perform scaling (Box filter) */ for (int u = 0; u < xMax; u++) { int src_u = u / factorUpHorizontal; for (int v = 0; v < yMax; v++) { int src_v = v / factorUpVertical; comp[u + x, y + v] = blockdata[src_v, src_u]; } } } #endregion break; // JRP 4/7/08 -- This mode is disabled temporarily as it needs to be fixed after // recent performance tweaks. // It can produce slightly better (less blocky) decodings. //case BlockUpsamplingMode.Interpolate: // #region Upsampling by interpolation // for (int u = 0; u < newH; u++) // { // for (int v = 0; v < newV; v++) // { // int val = 0; // for (int x = 0; x < factorUpHorizontal; x++) // { // int src_u = (u + x) / factorUpHorizontal; // if (src_u >= oldH) src_u = oldH - 1; // for (int y = 0; y < factorUpVertical; y++) // { // int src_v = (v + y) / factorUpVertical; // if (src_v >= oldV) src_v = oldV - 1; // val += src[src_v, src_u]; // } // } // dest[v, u] = (byte)(val / (factorUpHorizontal * factorUpVertical)); // } // } // #endregion // break; default: throw new ArgumentException("Upsampling mode not supported."); } }
public void writeDataScaled(byte[][,] raster, int componentIndex, BlockUpsamplingMode mode) { int x = 0, y = 0, lastblockheight = 0, incrementblock = 0; int blockIdx = 0; int w = raster[0].GetLength(0), h = raster[0].GetLength(1); // Keep looping through all of the blocks until there are no more. while (blockIdx < scanDecoded.Count) { int blockwidth = 0; int blockheight = 0; if (x >= w) { x = 0; y += incrementblock; } // Loop through the horizontal component blocks of the MCU first // then for each horizontal line write out all of the vertical // components for (int factorVIndex = 0; factorVIndex < factorV; factorVIndex++) { blockwidth = 0; for (int factorHIndex = 0; factorHIndex < factorH; factorHIndex++) { // Captures the width of this block so we can increment the X coordinate byte[,] blockdata = scanDecoded[blockIdx++]; // Writes the data at the specific X and Y coordinate of this component writeBlockScaled(raster, blockdata, componentIndex, x, y, mode); blockwidth += blockdata.GetLength(1) * factorUpH; x += blockdata.GetLength(1) * factorUpH; blockheight = blockdata.GetLength(0) * factorUpV; } y += blockheight; x -= blockwidth; lastblockheight += blockheight; } y -= lastblockheight; incrementblock = lastblockheight; lastblockheight = 0; x += blockwidth; } }
/// <summary> /// Stretches components as needed to normalize the size of all components. /// For example, in a 2x1 (4:2:2) sequence, the Cr and Cb channels will be /// scaled vertically by a factor of 2. /// </summary> public void scaleByFactors( BlockUpsamplingMode mode ) { int factorUpVertical = factorUpV, factorUpHorizontal = factorUpH; if (factorUpVertical == 1 && factorUpHorizontal == 1) return; for (int i = 0; i < scanDecoded.Count; i++) { byte[,] src = scanDecoded[i]; int oldV = src.GetLength(0), oldH = src.GetLength(1), newV = oldV * factorUpVertical, newH = oldH * factorUpHorizontal; byte[,] dest = new byte[newV, newH]; switch (mode) { case BlockUpsamplingMode.BoxFilter: #region Upsampling by repeating values /* Perform scaling (Box filter) */ for (int u = 0; u < newH; u++) { int src_u = u / factorUpHorizontal; for (int v = 0; v < newV; v++) { int src_v = v / factorUpVertical; dest[v, u] = src[src_v, src_u]; } } #endregion break; case BlockUpsamplingMode.Interpolate: #region Upsampling by interpolation for (int u = 0; u < newH; u++) { for (int v = 0; v < newV; v++) { int val = 0; for (int x = 0; x < factorUpHorizontal; x++) { int src_u = (u + x) / factorUpHorizontal; if (src_u >= oldH) src_u = oldH - 1; for (int y = 0; y < factorUpVertical; y++) { int src_v = (v + y) / factorUpVertical; if (src_v >= oldV) src_v = oldV - 1; val += src[src_v, src_u]; } } dest[v, u] = (byte)(val / (factorUpHorizontal * factorUpVertical)); } } #endregion break; default: throw new ArgumentException("Upsampling mode not supported."); } scanDecoded[i] = dest; } }
private void writeBlockScaled(byte[][,] raster, byte[,] blockdata, int compIndex, int x, int y, BlockUpsamplingMode mode) { int w = raster[0].GetLength(0), h = raster[0].GetLength(1); int factorUpVertical = factorUpV, factorUpHorizontal = factorUpH; int oldV = blockdata.GetLength(0), oldH = blockdata.GetLength(1), newV = oldV * factorUpVertical, newH = oldH * factorUpHorizontal; byte[,] comp = raster[compIndex]; // Blocks may spill over the frame so we bound by the frame size int yMax = newV; if ((y + yMax) > h) { yMax = h - y; } int xMax = newH; if ((x + xMax) > w) { xMax = w - x; } switch (mode) { case BlockUpsamplingMode.BoxFilter: #region Upsampling by repeating values // Special case 1: No scale-up if (factorUpVertical == 1 && factorUpHorizontal == 1) { for (int u = 0; u < xMax; u++) { for (int v = 0; v < yMax; v++) { comp[u + x, y + v] = blockdata[v, u]; } } } // Special case 2: Perform scale-up 4 pixels at a time else if (factorUpHorizontal == 2 && factorUpVertical == 2 && xMax == newH && yMax == newV) { for (int src_u = 0; src_u < oldH; src_u++) { int bx = src_u * 2 + x; for (int src_v = 0; src_v < oldV; src_v++) { byte val = blockdata[src_v, src_u]; int by = src_v * 2 + y; comp[bx, by] = val; comp[bx, by + 1] = val; comp[bx + 1, by] = val; comp[bx + 1, by + 1] = val; } } } else { /* Perform scaling (Box filter) */ for (int u = 0; u < xMax; u++) { int src_u = u / factorUpHorizontal; for (int v = 0; v < yMax; v++) { int src_v = v / factorUpVertical; comp[u + x, y + v] = blockdata[src_v, src_u]; } } } #endregion break; // JRP 4/7/08 -- This mode is disabled temporarily as it needs to be fixed after // recent performance tweaks. // It can produce slightly better (less blocky) decodings. //case BlockUpsamplingMode.Interpolate: // #region Upsampling by interpolation // for (int u = 0; u < newH; u++) // { // for (int v = 0; v < newV; v++) // { // int val = 0; // for (int x = 0; x < factorUpHorizontal; x++) // { // int src_u = (u + x) / factorUpHorizontal; // if (src_u >= oldH) src_u = oldH - 1; // for (int y = 0; y < factorUpVertical; y++) // { // int src_v = (v + y) / factorUpVertical; // if (src_v >= oldV) src_v = oldV - 1; // val += src[src_v, src_u]; // } // } // dest[v, u] = (byte)(val / (factorUpHorizontal * factorUpVertical)); // } // } // #endregion // break; default: throw new ArgumentException("Upsampling mode not supported."); } }
/// <summary> /// Stretches components as needed to normalize the size of all components. /// For example, in a 2x1 (4:2:2) sequence, the Cr and Cb channels will be /// scaled vertically by a factor of 2. /// </summary> public void scaleByFactors(BlockUpsamplingMode mode) { int factorUpVertical = factorUpV, factorUpHorizontal = factorUpH; if (factorUpVertical == 1 && factorUpHorizontal == 1) { return; } for (int i = 0; i < scanDecoded.Count; i++) { byte[,] src = scanDecoded[i]; int oldV = src.GetLength(0), oldH = src.GetLength(1), newV = oldV * factorUpVertical, newH = oldH * factorUpHorizontal; byte[,] dest = new byte[newV, newH]; switch (mode) { case BlockUpsamplingMode.BoxFilter: #region Upsampling by repeating values /* Perform scaling (Box filter) */ for (int u = 0; u < newH; u++) { int src_u = u / factorUpHorizontal; for (int v = 0; v < newV; v++) { int src_v = v / factorUpVertical; dest[v, u] = src[src_v, src_u]; } } #endregion break; case BlockUpsamplingMode.Interpolate: #region Upsampling by interpolation for (int u = 0; u < newH; u++) { for (int v = 0; v < newV; v++) { int val = 0; for (int x = 0; x < factorUpHorizontal; x++) { int src_u = (u + x) / factorUpHorizontal; if (src_u >= oldH) { src_u = oldH - 1; } for (int y = 0; y < factorUpVertical; y++) { int src_v = (v + y) / factorUpVertical; if (src_v >= oldV) { src_v = oldV - 1; } val += src[src_v, src_u]; } } dest[v, u] = (byte)(val / (factorUpHorizontal * factorUpVertical)); } } #endregion break; default: throw new ArgumentException("Upsampling mode not supported."); } scanDecoded[i] = dest; } }
public void writeBlockScaled(byte[][,] raster, byte[,] blockdata, int compIndex, int x, int y, BlockUpsamplingMode mode) { int length = raster[0].GetLength(0); int length2 = raster[0].GetLength(1); int factorUpV = this.factorUpV; int factorUpH = this.factorUpH; int length3 = blockdata.GetLength(0); int length4 = blockdata.GetLength(1); int num = length3 * factorUpV; int num2 = length4 * factorUpH; byte[,] array = raster[compIndex]; int num3 = num; if (y + num3 > length2) { num3 = length2 - y; } int num4 = num2; if (x + num4 > length) { num4 = length - x; } if (mode == BlockUpsamplingMode.BoxFilter) { if (factorUpV == 1 && factorUpH == 1) { for (int i = 0; i < num4; i++) { for (int j = 0; j < num3; j++) { array[i + x, y + j] = blockdata[j, i]; } } return; } if (factorUpH == 2 && factorUpV == 2 && num4 == num2 && num3 == num) { for (int k = 0; k < length4; k++) { int num5 = k * 2 + x; for (int l = 0; l < length3; l++) { byte b = blockdata[l, k]; int num6 = l * 2 + y; array[num5, num6] = b; array[num5, num6 + 1] = b; array[num5 + 1, num6] = b; array[num5 + 1, num6 + 1] = b; } } return; } for (int m = 0; m < num4; m++) { int num7 = m / factorUpH; for (int n = 0; n < num3; n++) { int num8 = n / factorUpV; array[m + x, y + n] = blockdata[num8, num7]; } } return; } throw new ArgumentException("Upsampling mode not supported."); }
public void scaleByFactors(BlockUpsamplingMode mode) { int factorUpV = this.factorUpV; int factorUpH = this.factorUpH; if (factorUpV == 1 && factorUpH == 1) { return; } for (int i = 0; i < scanDecoded.Count; i++) { byte[,] array = scanDecoded[i]; int length = array.GetLength(0); int length2 = array.GetLength(1); int num = length * factorUpV; int num2 = length2 * factorUpH; byte[,] array2 = new byte[num, num2]; switch (mode) { case BlockUpsamplingMode.BoxFilter: { for (int n = 0; n < num2; n++) { int num6 = n / factorUpH; for (int num7 = 0; num7 < num; num7++) { int num8 = num7 / factorUpV; array2[num7, n] = array[num8, num6]; } } break; } case BlockUpsamplingMode.Interpolate: { for (int j = 0; j < num2; j++) { for (int k = 0; k < num; k++) { int num3 = 0; for (int l = 0; l < factorUpH; l++) { int num4 = (j + l) / factorUpH; if (num4 >= length2) { num4 = length2 - 1; } for (int m = 0; m < factorUpV; m++) { int num5 = (k + m) / factorUpV; if (num5 >= length) { num5 = length - 1; } num3 += array[num5, num4]; } } array2[k, j] = (byte)(num3 / (factorUpH * factorUpV)); } } break; } default: throw new ArgumentException("Upsampling mode not supported."); } scanDecoded[i] = array2; } }
private void writeBlockScaled(byte[][,] raster, byte[,] blockdata, int compIndex, int x, int y, BlockUpsamplingMode mode) { int num11; int num12; int length = raster[0].GetLength(0); int num2 = raster[0].GetLength(1); int factorUpV = this.factorUpV; int factorUpH = this.factorUpH; int num5 = blockdata.GetLength(0); int num6 = blockdata.GetLength(1); int num7 = num5 * factorUpV; int num8 = num6 * factorUpH; byte[,] buffer = raster[compIndex]; int num9 = num7; if ((y + num9) > num2) { num9 = num2 - y; } int num10 = num8; if ((x + num10) > length) { num10 = length - x; } if (mode != BlockUpsamplingMode.BoxFilter) { throw new ArgumentException("Upsampling mode not supported."); } if ((factorUpV == 1) && (factorUpH == 1)) { for (num11 = 0; num11 < num10; num11++) { num12 = 0; while (num12 < num9) { buffer[num11 + x, y + num12] = blockdata[num12, num11]; num12++; } } } else { int num13; int num15; if ((((factorUpH == 2) && (factorUpV == 2)) && (num10 == num8)) && (num9 == num7)) { num13 = 0; while (num13 < num6) { int num14 = (num13 * 2) + x; num15 = 0; while (num15 < num5) { byte num16 = blockdata[num15, num13]; int num17 = (num15 * 2) + y; buffer[num14, num17] = num16; buffer[num14, num17 + 1] = num16; buffer[num14 + 1, num17] = num16; buffer[num14 + 1, num17 + 1] = num16; num15++; } num13++; } } else { for (num11 = 0; num11 < num10; num11++) { num13 = num11 / factorUpH; for (num12 = 0; num12 < num9; num12++) { num15 = num12 / factorUpV; buffer[num11 + x, y + num12] = blockdata[num15, num13]; } } } } }
public void scaleByFactors(BlockUpsamplingMode mode) { int factorUpV = this.factorUpV; int factorUpH = this.factorUpH; if ((factorUpV != 1) || (factorUpH != 1)) { for (int i = 0; i < this.scanDecoded.Count; i++) { int num8; int num9; int num11; byte[,] buffer = this.scanDecoded[i]; int length = buffer.GetLength(0); int num5 = buffer.GetLength(1); int num6 = length * factorUpV; int num7 = num5 * factorUpH; byte[,] buffer2 = new byte[num6, num7]; switch (mode) { case BlockUpsamplingMode.BoxFilter: num8 = 0; goto Label_00C4; case BlockUpsamplingMode.Interpolate: num8 = 0; goto Label_018E; default: throw new ArgumentException("Upsampling mode not supported."); } Label_0082: num9 = num8 / factorUpH; int num10 = 0; while (num10 < num6) { num11 = num10 / factorUpV; buffer2[num10, num8] = buffer[num11, num9]; num10++; } num8++; Label_00C4: if (num8 < num7) { goto Label_0082; } goto Label_01AA; Label_00DD: num10 = 0; while (num10 < num6) { int num12 = 0; for (int j = 0; j < factorUpH; j++) { num9 = (num8 + j) / factorUpH; if (num9 >= num5) { num9 = num5 - 1; } for (int k = 0; k < factorUpV; k++) { num11 = (num10 + k) / factorUpV; if (num11 >= length) { num11 = length - 1; } num12 += buffer[num11, num9]; } } buffer2[num10, num8] = (byte)(num12 / (factorUpH * factorUpV)); num10++; } num8++; Label_018E: if (num8 < num7) { goto Label_00DD; } Label_01AA: this.scanDecoded[i] = buffer2; } } }
public void writeDataScaled(byte[][,] raster, int componentIndex, BlockUpsamplingMode mode) { int x = 0; int y = 0; int num3 = 0; int num4 = 0; int num5 = 0; int length = raster[0].GetLength(0); int num7 = raster[0].GetLength(1); while (num5 < this.scanDecoded.Count) { int num8 = 0; int num9 = 0; if (x >= length) { x = 0; y += num4; } for (int i = 0; i < this.factorV; i++) { num8 = 0; for (int j = 0; j < this.factorH; j++) { byte[,] blockdata = this.scanDecoded[num5++]; this.writeBlockScaled(raster, blockdata, componentIndex, x, y, mode); num8 += blockdata.GetLength(1) * this.factorUpH; x += blockdata.GetLength(1) * this.factorUpH; num9 = blockdata.GetLength(0) * this.factorUpV; } y += num9; x -= num8; num3 += num9; } y -= num3; num4 = num3; num3 = 0; x += num8; } }
private void writeBlockScaled(byte[][,] raster, byte[,] blockdata, int compIndex, int x, int y, BlockUpsamplingMode mode) { int num11; int num12; int length = raster[0].GetLength(0); int num2 = raster[0].GetLength(1); int factorUpV = this.factorUpV; int factorUpH = this.factorUpH; int num5 = blockdata.GetLength(0); int num6 = blockdata.GetLength(1); int num7 = num5 * factorUpV; int num8 = num6 * factorUpH; byte[,] buffer = raster[compIndex]; int num9 = num7; if ((y + num9) > num2) { num9 = num2 - y; } int num10 = num8; if ((x + num10) > length) { num10 = length - x; } if (mode != BlockUpsamplingMode.BoxFilter) { throw new ArgumentException("Upsampling mode not supported."); } if ((factorUpV == 1) && (factorUpH == 1)) { for (num11 = 0; num11 < num10; num11++) { num12 = 0; while (num12 < num9) { buffer[num11 + x, y + num12] = blockdata[num12, num11]; num12++; } } } else { int num13; int num15; if ((((factorUpH == 2) && (factorUpV == 2)) && (num10 == num8)) && (num9 == num7)) { num13 = 0; while (num13 < num6) { int num14 = (num13 * 2) + x; num15 = 0; while (num15 < num5) { byte num16 = blockdata[num15, num13]; int num17 = (num15 * 2) + y; buffer[num14, num17] = num16; buffer[num14, num17 + 1] = num16; buffer[num14 + 1, num17] = num16; buffer[num14 + 1, num17 + 1] = num16; num15++; } num13++; } } else { for (num11 = 0; num11 < num10; num11++) { num13 = num11 / factorUpH; for (num12 = 0; num12 < num9; num12++) { num15 = num12 / factorUpV; buffer[num11 + x, y + num12] = blockdata[num15, num13]; } } } } }
public void scaleByFactors(BlockUpsamplingMode mode) { int factorUpV = this.factorUpV; int factorUpH = this.factorUpH; if ((factorUpV != 1) || (factorUpH != 1)) { for (int i = 0; i < this.scanDecoded.Count; i++) { int num8; int num9; int num11; byte[,] buffer = this.scanDecoded[i]; int length = buffer.GetLength(0); int num5 = buffer.GetLength(1); int num6 = length * factorUpV; int num7 = num5 * factorUpH; byte[,] buffer2 = new byte[num6, num7]; switch (mode) { case BlockUpsamplingMode.BoxFilter: num8 = 0; goto Label_00C4; case BlockUpsamplingMode.Interpolate: num8 = 0; goto Label_018E; default: throw new ArgumentException("Upsampling mode not supported."); } Label_0082: num9 = num8 / factorUpH; int num10 = 0; while (num10 < num6) { num11 = num10 / factorUpV; buffer2[num10, num8] = buffer[num11, num9]; num10++; } num8++; Label_00C4: if (num8 < num7) { goto Label_0082; } goto Label_01AA; Label_00DD: num10 = 0; while (num10 < num6) { int num12 = 0; for (int j = 0; j < factorUpH; j++) { num9 = (num8 + j) / factorUpH; if (num9 >= num5) { num9 = num5 - 1; } for (int k = 0; k < factorUpV; k++) { num11 = (num10 + k) / factorUpV; if (num11 >= length) { num11 = length - 1; } num12 += buffer[num11, num9]; } } buffer2[num10, num8] = (byte) (num12 / (factorUpH * factorUpV)); num10++; } num8++; Label_018E: if (num8 < num7) { goto Label_00DD; } Label_01AA: this.scanDecoded[i] = buffer2; } } }