// 坐标平差
private bool AdjCoord()
{
mDspStr += ">>> 4.坐标近似平差计算 <<<\r\n";
double fx, fy, fs;
double totalS = 0.0;
int n = mTraverseLine.Lines.Count; // 导线所有直线段数
for (int i = 1; i <= n - 2; i++) // 计算观测直线总长
{
totalS += mTraverseLine.Lines[i].Distance;
}
double fs0 = 5000.0;
fx = mTraverseLine.Lines[n - 1].StartPt.X - mTraverseLine.KnowedObsData.X0[2];
fy = mTraverseLine.Lines[n - 1].StartPt.Y - mTraverseLine.KnowedObsData.Y0[2];
fs = Math.Sqrt(fx * fx + fy * fy);
fs = Math.Floor(1 / (fs / totalS));
mDspStr += " 坐标闭合差fx=" + (fx * 1000).ToString("0.0") + "mm fy=" + (fy * 1000).ToString("0.0") + "mm 边长相对误差fs=1/" + fs.ToString("0") + " 限差=1/" + fs0.ToString("0") + "\r\n";
if (fs < fs0)
{
mDspStr += "坐标闭合差超限!\r\n";
return(false);
}
// 计算坐标改正数
mDspStr += "坐标改正数\r\n";
double[] Vx = new double[n - 3 + 1], Vy = new double[n - 3 + 1];
double Vx0 = -fx / totalS;
double Vy0 = -fy / totalS;
for (int i = 0; i <= n - 3; i++)
{
Vx[i] = Vx0 * mTraverseLine.Lines[i + 1].Distance;
Vy[i] = Vy0 * mTraverseLine.Lines[i + 1].Distance;
mDspStr += mTraverseLine.Lines[i + 1].EndPt.Name + " 点 的坐标改正数Vx=" + (Vx[i] * 1000).ToString("0.0") + "mm Vy=" + (Vy[i] * 1000).ToString("0.0") + "mm \r\n";
}
// 计算坐标改正数
mDspStr += "坐标平差值\r\n";
double totalVx, totalVy;
totalVx = totalVy = 0.0;
for (int i = 0; i <= n - 3; i++)
{
totalVx += Vx[i];
totalVy += Vy[i];
mTraverseLine.Lines[i + 1].EndPt.X += totalVx;
mTraverseLine.Lines[i + 1].EndPt.Y += totalVy;
mDspStr += mTraverseLine.Lines[i + 1].EndPt.Name + " 点 平差坐标X=" + mTraverseLine.Lines[i + 1].EndPt.X.ToString("0.000") + " Y=" + mTraverseLine.Lines[i + 1].EndPt.Y.ToString("0.000") + "\r\n";
// 重新计算导线距离、方位角等数据
mTraverseLine.Lines[i + 1].Direction = BaseFunction.DirectAB(mTraverseLine.Lines[i + 1]);
mTraverseLine.Lines[i + 1].Distance = BaseFunction.DistAB(mTraverseLine.Lines[i + 1]);
}
return(true);
}
// 改正方位角
private bool AdjDirect()
{
double aaE; // 终止方位角
double fbeta; // 方位角闭合差
int n = mTraverseLine.KnowedObsData.bb.Count; // 观测夹角个数
double fbeta0 = 24 * Math.Sqrt(n) / 10000; // 方位角闭合差限差(三级导线),转为dd.mmss形式
mDspStr += "\r\n";
mDspStr += ">>> 2.方位角近似平差 <<<\r\n";
aaE = BaseFunction.DirectAB(mTraverseLine.KnowedObsData.X0[2], mTraverseLine.KnowedObsData.Y0[2], mTraverseLine.KnowedObsData.X0[3], mTraverseLine.KnowedObsData.Y0[3]);
// 显示终止方位角
mDspStr += " 终止方位角: " + BaseFunction.Hu2DMS(aaE).ToString("0.0000") + "\r\n";
// 计算角度闭合差
fbeta = mTraverseLine.Lines[n].Direction - aaE;
mDspStr += " 角度闭合差=" + BaseFunction.Hu2DMS(fbeta).ToString("0.0000") + " 限差=" + fbeta0.ToString("0.0000") + "\r\n";
if (Math.Abs(BaseFunction.Hu2DMS(fbeta)) > fbeta0)
{
mDspStr += "方位角闭合差超限!\r\n";
return(false);
}
// 改正后的方位角
double Vbeta0 = -fbeta / n;
double alpha; // 改正后方位角
for (var i = 1; i <= n; i++)
{
alpha = mTraverseLine.Lines[i].Direction;
alpha += i * Vbeta0;
if (alpha >= 2 * Math.PI)
{
alpha -= 2 * Math.PI;
}
if (alpha < 0)
{
alpha += 2 * Math.PI;
}
mTraverseLine.Lines[i].Direction = alpha;
mDspStr += mTraverseLine.Lines[i].Name + " 边改正后的方位角=" + BaseFunction.Hu2DMS(alpha).ToString("0.0000") + "\r\n";
}
mDspStr += "\r\n";
return(true);
}
// 计算近似方位角
private void CalcDirect0()
{
int n = mTraverseLine.KnowedObsData.bb.Count; // 观测夹角个数
double alpha; // 近似方位角
double beta; // 观测夹角
if (mTraverseLine.NetType == 1)
{
for (var i = 1; i <= n; i++)
{
beta = mTraverseLine.KnowedObsData.bb[i - 1];
alpha = BaseFunction.DirectAB(mTraverseLine.Lines[i - 1], beta, mTraverseLine.AngleType);
mTraverseLine.Lines[i].Direction = alpha;
}
}
else
{
if (mTraverseLine.AngleType == 1)
{
mTraverseLine.KnowedObsData.bb[0] = 2 * Math.PI - mTraverseLine.KnowedObsData.bb[0];
}
mTraverseLine.KnowedObsData.bb[n - 1] = mTraverseLine.KnowedObsData.bb[n - 1] + (2 * Math.PI - mTraverseLine.KnowedObsData.bb[0]); // 最后一个夹角（转为附和导线)
if (mTraverseLine.KnowedObsData.bb[n - 1] >= 2 * Math.PI)
{
mTraverseLine.KnowedObsData.bb[n - 1] = mTraverseLine.KnowedObsData.bb[n - 1] - 2 * Math.PI;
}
mTraverseLine.AngleType = 2; // 转换为附和导线后，夹角固定为右角
for (var i = 1; i <= n; i++)
{
beta = mTraverseLine.KnowedObsData.bb[i - 1];
alpha = BaseFunction.DirectAB(mTraverseLine.Lines[i - 1], beta, mTraverseLine.AngleType);
mTraverseLine.Lines[i].Direction = alpha;
}
}
mDspStr = ">>> 1.近似方位角计算 <<<\r\n";
for (var i = 1; i <= n; i++)
{
mDspStr += mTraverseLine.Lines[i].Name + " 边的近似方位角=" + BaseFunction.Hu2DMS(mTraverseLine.Lines[i].Direction).ToString("0.0000") + "\r\n";
}
}
// 初始化导线
private void Intil()
{
MyPoint startPt, endPt;
MyLine line;
int n = mTraverseLine.KnowedObsData.Pnames.Count; // 总点数（已知点4+未知点数)
// 赋值第一条起始边
startPt = new MyPoint();
startPt.Name = mTraverseLine.KnowedObsData.Pnames[0];
startPt.X = mTraverseLine.KnowedObsData.X0[0];
startPt.Y = mTraverseLine.KnowedObsData.Y0[0];
startPt.Type = 1;
endPt = new MyPoint();
endPt.Name = mTraverseLine.KnowedObsData.Pnames[1];
endPt.X = mTraverseLine.KnowedObsData.X0[1];
endPt.Y = mTraverseLine.KnowedObsData.Y0[1];
endPt.Type = 1;
line = new MyLine();
line.StartPt = startPt;
line.EndPt = endPt;
line.Name = startPt.Name + endPt.Name;
line.Distance = BaseFunction.DistAB(line);
line.Direction = BaseFunction.DirectAB(line);
line.Type = 1;
mTraverseLine.Lines.Add(line);
// 赋值中间未知边
for (int i = 2; i <= n - 2; i++)
{
startPt = endPt;
endPt = new MyPoint();
endPt.Name = mTraverseLine.KnowedObsData.Pnames[i];
endPt.Type = 2;
if (i == n - 2)
{
endPt.Type = 1;
endPt.X = mTraverseLine.KnowedObsData.X0[2];
endPt.Y = mTraverseLine.KnowedObsData.Y0[2];
}
line = new MyLine();
line.StartPt = startPt;
line.EndPt = endPt;
line.Name = startPt.Name + endPt.Name;
line.Distance = mTraverseLine.KnowedObsData.SS[i - 2]; // 赋值实测距离
line.Type = 2;
mTraverseLine.Lines.Add(line);
}
// 赋值最后一条已知边
startPt = endPt;
endPt = new MyPoint();
endPt.Name = mTraverseLine.KnowedObsData.Pnames[n - 1];
endPt.Type = 1;
endPt.X = mTraverseLine.KnowedObsData.X0[3];
endPt.Y = mTraverseLine.KnowedObsData.Y0[3];
line = new MyLine();
line.StartPt = startPt;
line.EndPt = endPt;
line.Name = startPt.Name + endPt.Name;
line.Distance = BaseFunction.DistAB(line);
line.Direction = BaseFunction.DirectAB(line);
line.Type = 1;
mTraverseLine.Lines.Add(line);
}
