private string namespaceName = "WIP_Test.TestService";//命名空间
/// <summary>
/// 加解密数据
/// </summary>
/// <param name="param"></param>
/// <returns></returns>
public ReturnBody <string> GetEncryptData(GetEncryptData param)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <GetEncryptData>(namespaceName, "GetEncryptData", param);
try
{
string result = "";
if (param.isEncrypt == "0")
{//加密
result = DESEncryptHelper.Encrypt(param.value);
}
else if (param.isEncrypt == "1")
{ //解密
result = DESEncryptHelper.Decrypt(param.value);
}
else
{
return(BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, ResMsg.FAILURE, "是否解密值错误"));
}
return(BLLHelpler.GetReturnBody <string>(ResCode.SUCCESS, ResMsg.SUCCESS, result));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, ResMsg.FAILURE, exception, "出现错误:" + ex.Message));
}
}
/// <summary>
/// 获取单个打印配置
/// </summary>
/// <param name="model"></param>
/// <returns></returns>
public ReturnBody <PrintConfigEntity> GetSinglePrintConfig(QueryPrintConfigParam model)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <QueryPrintConfigParam>(namespaceName, "GetSinglePrintConfig", model);
try
{
#region 验证
if (model == null || string.IsNullOrEmpty(model.printType))
{
exception.exceptionMsg = ResMsg.PARAMETERNOEMPTY;
return(BLLHelpler.GetReturnBody <PrintConfigEntity>(ResCode.PARAMETERNOEMPTY, exception.exceptionMsg, exception));
}
#endregion
var retModel = printConfigBLL.GetModel(model.printType.ToString());
if (retModel == null)
{
exception.exceptionMsg = "没有找到数据";
return(BLLHelpler.GetReturnBody <PrintConfigEntity>(ResCode.FAILURE, exception.exceptionMsg, exception));
}
return(BLLHelpler.GetReturnBody <PrintConfigEntity>(ResCode.SUCCESS, ResMsg.SUCCESS, retModel));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <PrintConfigEntity>(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
public ReturnBody <AuthorizationUserModel> GetAuthorizationuser(AuthorizationUserModel model)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <AuthorizationUserModel>(namespaceName, "GetAuthorizationuser", model);
try
{
#region 验证
if (model == null || string.IsNullOrEmpty(model.s95id))
{
exception.exceptionMsg = ResMsg.PARAMETERNOEMPTY;
return(BLLHelpler.GetReturnBody <AuthorizationUserModel>(ResCode.PARAMETERNOEMPTY, exception.exceptionMsg));
}
#endregion
var retModel = Authorizationbll.GetAuthorization(model.s95id);
if (retModel == null)
{
exception.exceptionMsg = "没有找到相关用户";
return(BLLHelpler.GetReturnBody <AuthorizationUserModel>(ResCode.FAILURE, exception.exceptionMsg));
}
return(BLLHelpler.GetReturnBody <AuthorizationUserModel>(ResCode.SUCCESS, ResMsg.SUCCESS, retModel));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <AuthorizationUserModel>(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 获取单个代码项表
/// </summary>
/// <param name="model"></param>
/// <returns></returns>
public ReturnBody <CodeItemsEntity> GetSingleCodeItems(QueryCodeItemsModel model)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <QueryCodeItemsModel>(namespaceName, "GetSingleCodeItems", model);
try
{
#region 验证
if (model == null || string.IsNullOrEmpty(model.setCode) || string.IsNullOrEmpty(model.code))
{
exception.exceptionMsg = ResMsg.PARAMETERNOEMPTY;
return(BLLHelpler.GetReturnBody <CodeItemsEntity>(ResCode.PARAMETERNOEMPTY, exception.exceptionMsg, exception));
}
#endregion
var retModel = codeItemsBLL.GetModel(model.setCode, model.code);
if (retModel == null)
{
exception.exceptionMsg = "没有找到数据";
return(BLLHelpler.GetReturnBody <CodeItemsEntity>(ResCode.FAILURE, exception.exceptionMsg, exception));
}
return(BLLHelpler.GetReturnBody <CodeItemsEntity>(ResCode.SUCCESS, ResMsg.SUCCESS, retModel));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <CodeItemsEntity>(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 生成token
/// </summary>
/// <param name="user"></param>
/// <returns></returns>
public ReturnBody <string> GenerateToken(GenerateTokenParam user)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <GenerateTokenParam>(namespaceName, "GenerateToken", user);
try
{
string token = JwtHelp.GenerateToken(user.Name, null, user.ExpDays);
return(BLLHelpler.GetReturnBody <string>(ResCode.SUCCESS, ResMsg.SUCCESS, token));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, ResMsg.FAILURE, exception, "出现错误:" + ex.Message));
}
}
/// <summary>
/// 获取打印配置列表（分页）
/// </summary>
/// <returns></returns>
public ReturnBody <PageResultModel <PrintConfigModel> > GetPrintConfigList(QueryPrintConfigParam queryModel)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <QueryPrintConfigParam>(namespaceName, "GetPrintConfigList", queryModel);
try
{
PageResultModel <PrintConfigModel> list = printConfigBLL.GetModelListForPage(queryModel);
return(BLLHelpler.GetReturnBody <PageResultModel <PrintConfigModel> >(ResCode.SUCCESS, ResMsg.SUCCESS, list));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <PageResultModel <PrintConfigModel> >(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 获取代码集表列表
/// </summary>
/// <returns></returns>
public ReturnBody <List <CodeSetsModel> > GetAllCodeSets()
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <string>(namespaceName, "GetAllCodeSets", "");
try
{
List <CodeSetsModel> list = codeSetsBLL.GetModelList();
return(BLLHelpler.GetReturnBody <List <CodeSetsModel> >(ResCode.SUCCESS, ResMsg.SUCCESS, list));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <List <CodeSetsModel> >(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 获取邮件类别列表
/// </summary>
/// <returns></returns>
public ReturnBody <List <MailRuleEntity> > GetMailRuleList()
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <string>(namespaceName, "GetMailRuleList", "", "", "");
try
{
List <MailRuleEntity> list = MailRuleBLL.GetInstance().GetMailRuleList();
return(BLLHelpler.GetReturnBody <List <MailRuleEntity> >(ResCode.SUCCESS, ResMsg.SUCCESS, list));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <List <MailRuleEntity> >(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 获取指定代码集的代码项表列表
/// </summary>
/// <returns></returns>
public ReturnBody <List <CodeSetsModel> > GetAllCodeItemsByCodeSet(GetAllCodeItemsByCodeSetParam param)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <GetAllCodeItemsByCodeSetParam>(namespaceName, "GetAllCodeItemsByCodeSet", param);
try
{
string strWhere = " codeItems.setCode='" + param.codeSet + "' ";
List <CodeSetsModel> list = codeItemsBLL.GetAllModelList(strWhere);
return(BLLHelpler.GetReturnBody <List <CodeSetsModel> >(ResCode.SUCCESS, ResMsg.SUCCESS, list));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <List <CodeSetsModel> >(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 更新权限到Redis
/// </summary>
/// <param name="param"></param>
/// <returns></returns>
public ReturnBody <string> UpdateAuth()
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <string>(namespaceName, "UpdateAuth", "", "", "");
try
{
JwtHelp.UpdateAuthToRedis();
ReturnBody <string> ret = new ReturnBody <string>();
ret.resCode = ResCode.SUCCESS;
return(ret);
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
//*/
/// <summary>
/// 发送邮件
/// </summary>
/// <param name="param"></param>
/// <returns></returns>
public ReturnBody <bool> SendMail(MailParam param)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <MailParam>(namespaceName, "SendMail", param);
try
{
param.describe = "<p class=\"MsoNormal\"><span lang=\"EN-US\"> </span>上汽项目<span lang=\"EN-US\">,ECM</span>联调问题很多<span lang=\"EN-US\">,</span>项目已经红色预警<span lang=\"EN-US\">,</span>我们将在周末继续配合法方修正各个关键点<span lang=\"EN-US\">.<o:p></o:p></span></p>";
IMail _mail = new Mail(MailCategory.缺省);
_mail.MailSending(param.mailSubject, param.describe, param.file_Path);
return(BLLHelpler.GetReturnBody <bool>(ResCode.SUCCESS, ResMsg.SUCCESS, true));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <bool>(ResCode.FAILURE, ResMsg.FAILURE, exception, false));
}
}
/// <summary>
/// 获取邮件人员列表
/// </summary>
/// <returns></returns>
public ReturnBody <List <MailPersonModel> > GetMailPersonList(QueryMailPersonParam param)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <string>(namespaceName, "GetMailPersonList", "", "", "");
try
{
if (param == null || string.IsNullOrEmpty(param.categoryId))
{
return(BLLHelpler.GetReturnBody <List <MailPersonModel> >(ResCode.PARAMETERNOEMPTY, ResMsg.PARAMETERNOEMPTY, null));
}
List <MailPersonModel> list = MailRuleBLL.GetInstance().GetMailPersonList(param.categoryId);
return(BLLHelpler.GetReturnBody <List <MailPersonModel> >(ResCode.SUCCESS, ResMsg.SUCCESS, list));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <List <MailPersonModel> >(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 获取权限
/// </summary>
/// <param name="param"></param>
/// <returns></returns>
public ReturnBody <List <RedisModel> > GetAuth()
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <string>(namespaceName, "GetAuth", "", "", "");
try
{
List <RedisModel> redisModelList = new List <RedisModel>();
redisModelList = JwtHelp.GetAuthFormRedis();
ReturnBody <List <RedisModel> > ret = new ReturnBody <List <RedisModel> >();
ret.resCode = ResCode.SUCCESS;
ret.resData = redisModelList;
return(ret);
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <List <RedisModel> >(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 修改密码
/// </summary>
/// <param name="pwd"></param>
/// <returns></returns>
public ReturnBody <string> Userupdatepwd(UserPassWordParam pwd)
{
ReturnBody <string> retBody = null;
String strMsg = string.Empty;
var strMsg2 = "";
GEBF.BrilliantFactoryClient bfclient = new GEBF.BrilliantFactoryClient("BasicHttpBinding_IBrilliantFactory", GEBFUrl);
bfclient.ClientCredentials.UserName.UserName = "******";
bfclient.ClientCredentials.UserName.Password = "******";
WebHeaderCollection headers = WebOperationContext.Current.IncomingRequest.Headers;
bfclient.UpdatePwd(pwd.uName, pwd.uPwd, pwd.uNewPwd, out strMsg);
if ("Password Updated Success".Equals(strMsg))
{
strMsg2 = "密码修改成功";
retBody = BLLHelpler.GetReturnBody <string>(ResCode.SUCCESS, ResMsg.SUCCESS, strMsg2);
}
else if ("User Name is Incorrect".Equals(strMsg))
{
strMsg2 = "用户不存在";
retBody = BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, ResMsg.FAILURE, strMsg2);
}
else if ("Password is incorrect".Equals(strMsg))
{
strMsg2 = "原密码不正确";
retBody = BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, ResMsg.FAILURE, strMsg2);
}
//if (result)
//{
//}
//else
//{
// strMsg = "密码修改失败";
// retBody = BLLHelpler.GetReturnBody<string>(ResCode.FAILURE, strMsg);
//}
return(retBody);
}
/// <summary>
/// 获取代码项表列表（分页）
/// </summary>
/// <returns></returns>
public ReturnBody <PageResultModel <CodeItemsEntity> > GetCodeItemsList(QueryCodeItemsModel queryModel)
{
var strOrderBy = " codeItems.lastModifyTime DESC";
var strWhere = "";
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <QueryCodeItemsModel>(namespaceName, "GetCodeItemsList", queryModel);
try
{
if (queryModel != null)
{
if (!string.IsNullOrEmpty(queryModel.code))
{
strWhere += " codeItems.code LIKE '%" + queryModel.code + "%',";
}
if (!string.IsNullOrEmpty(queryModel.name))
{
strWhere += " codeItems.name LIKE '%" + queryModel.name + "%',";
}
if (!string.IsNullOrEmpty(queryModel.setCode))
{
strWhere += " codeItems.setCode LIKE '%" + queryModel.setCode + "%',";
}
if (!string.IsNullOrEmpty(queryModel.delFlag))
{
strWhere += " codeItems.delFlag ='" + queryModel.delFlag + "',";
}
if (!string.IsNullOrEmpty(strWhere))
{
strWhere = strWhere.Substring(0, strWhere.Length - 1);
}
}
PageResultModel <CodeItemsEntity> list = codeItemsBLL.GetModelListForPage(strOrderBy, strWhere, queryModel);
return(BLLHelpler.GetReturnBody <PageResultModel <CodeItemsEntity> >(ResCode.SUCCESS, ResMsg.SUCCESS, list));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <PageResultModel <CodeItemsEntity> >(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 删除代码项表
/// </summary>
/// <param name="model"></param>
/// <returns></returns>
public ReturnBody <bool> EnableCodeItems(QueryCodeItemsModel model)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <QueryCodeItemsModel>(namespaceName, "DelCodeItems", model);
try
{
#region 验证
if (model == null || model.id == 0)
{
exception.exceptionMsg = ResMsg.PARAMETERNOEMPTY;
return(BLLHelpler.GetReturnBody <bool>(ResCode.PARAMETERNOEMPTY, exception.exceptionMsg, exception));
}
#endregion
var result = codeItemsBLL.Enable(model.id.ToString(), model.delFlag, JwtHelp.GetCurUserName());
return(BLLHelpler.GetReturnBody <bool>(ResCode.SUCCESS, ResMsg.SUCCESS, result));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <bool>(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 更新邮箱人员
/// </summary>
/// <returns></returns>
public ReturnBody <string> UpdateMailPerson(UpdateMailPersonParam param)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <UpdateMailPersonParam>(namespaceName, "UpdateMailPerson", param, "", "");
try
{
MethodReturnResultModel ret = MailRuleBLL.GetInstance().UpdateMailPerson(param, JwtHelp.GetCurUserName());
if (ret != null && ret.IsSuccess)
{
return(BLLHelpler.GetReturnBody <string>(ResCode.SUCCESS, ResMsg.SUCCESS, ""));
}
else
{
return(BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, ResMsg.FAILURE, ""));
}
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 禁启用代码集表
/// </summary>
/// <param name="model"></param>
/// <returns></returns>
public ReturnBody <bool> EnableCodeSets(QueryCodeSetsModel model)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <QueryCodeSetsModel>(namespaceName, "EnableCodeSets", model);
try
{
#region 验证
if (model == null || string.IsNullOrEmpty(model.code))
{
exception.exceptionMsg = ResMsg.PARAMETERNOEMPTY;
return(BLLHelpler.GetReturnBody <bool>(ResCode.PARAMETERNOEMPTY, exception.exceptionMsg, exception));
}
#endregion
string lastModifier = JwtHelp.GetCurUserName();
var result = codeSetsBLL.Enable(model.code.ToString(), model.delFlag, lastModifier);
return(BLLHelpler.GetReturnBody <bool>(ResCode.SUCCESS, ResMsg.SUCCESS, result));
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <bool>(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 基础数据同步
/// </summary>
/// <param name="basedataList"></param>
/// <returns></returns>
public ReturnBody <BaseDataSynResultModel> datasyn(List <BaseDataSynParamModel> basedataList)
{
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <List <BaseDataSynParamModel> >(namespaceName, "datasyn", basedataList, "", "");
try
{
#region 验证
if (basedataList == null)
{
exception.exceptionMsg = "要同步的基础数据为空";
return(BLLHelpler.GetReturnBody <BaseDataSynResultModel>(ResCode.PARAMETERNOEMPTY, exception.exceptionMsg, exception));
}
List <ColumnsModel> columnsList = null;
ValidateResModel res = null;
int i = 0;
List <BaseDataSynParamModel> newBasedataList = new List <BaseDataSynParamModel>();
List <string> successMaterial = new List <string>();
List <FailureSaveMaterial> failureMaterialList = new List <FailureSaveMaterial>();
FailureSaveMaterial failureSaveMaterial = null;
BaseDataSynResultModel baseModel = new BaseDataSynResultModel();
foreach (var item in basedataList)
{
i++;
//必填项验证
columnsList = new List <ColumnsModel>()
{
new ColumnsModel()
{
ChinaName = "标识", PropertyName = "UID"
},
new ColumnsModel()
{
ChinaName = "出热MES物料号", PropertyName = "heatingOutCode"
},
new ColumnsModel()
{
ChinaName = "物料编码", PropertyName = "materialCode"
},
/*
* new ColumnsModel(){ChinaName="1号线装炉数量",PropertyName="ECM_LINE1"},
* new ColumnsModel(){ChinaName="2号线装炉数量",PropertyName="ECM_LINE2"},
* new ColumnsModel(){ChinaName="3号线装炉数量",PropertyName="ECM_LINE3"},
* new ColumnsModel(){ChinaName="4号线装炉数量",PropertyName="ECM_LINE4"},
* new ColumnsModel(){ChinaName="5号线装炉数量",PropertyName="ECM_LINE5"},
* //*/
new ColumnsModel()
{
ChinaName = "类型", PropertyName = "classification"
},
new ColumnsModel()
{
ChinaName = "物料出ECM后的去向", PropertyName = "directionHeating"
}
};
res = ValidateDataHelper.ValidateNullOrEmpty <BaseDataSynParamModel>(columnsList, item);
if (res != null && !res.IsValidate)
{
failureSaveMaterial = new FailureSaveMaterial();
failureSaveMaterial.failureReason = "第" + i.ToString() + "个" + res.ValidateMsg;
failureSaveMaterial.failureCode = failureCode.empty;
failureSaveMaterial.materialCode = item.materialCode;
failureSaveMaterial.UID = item.UID;
failureMaterialList.Add(failureSaveMaterial);
baseModel.FailureCount++;
continue;
}
else
{
//验证产线装炉量
if (item.ECM_LINE1 == 0 && item.ECM_LINE2 == 0 &&
item.ECM_LINE3 == 0 && item.ECM_LINE4 == 0 && item.ECM_LINE5 == 0)
{
failureSaveMaterial = new FailureSaveMaterial();
failureSaveMaterial.failureReason = "第" + i.ToString() + "个五条产线的装炉量不能全是0";
failureSaveMaterial.failureCode = failureCode.empty;
failureSaveMaterial.materialCode = item.materialCode;
failureSaveMaterial.UID = item.UID;
failureMaterialList.Add(failureSaveMaterial);
baseModel.FailureCount++;
continue;
}
newBasedataList.Add(item);
}
}
#endregion
List <Dictionary <string, string> > modelList = JsonConvert.DeserializeObject <List <Dictionary <string, string> > >(JsonConvert.SerializeObject(newBasedataList));
WIP_PFMD.GEBF.BrilliantFactoryClient bfclient = PFMDHelper.GetInstance().GetPfmdCommObject().bfclient;
Dictionary <string, string> propDict = null;
bool result = false;
List <string> materialCodeList = new List <string>();
foreach (var model in modelList)
{
var new_materialCode = model["materialCode"];
materialCodeList.Add(new_materialCode);
propDict = new Dictionary <string, string>();
foreach (var item in model)
{
if (item.Key == "materialCode" || item.Key == "UID")
{
continue;
}
propDict.Add(item.Key, item.Value);
}
propDict.Add("heatingInCode", new_materialCode);//进热物料号 【EditBy shaocx,2018-12-13】
Dictionary <string, string> dict = bfclient.GetAllProperty(new_materialCode);
if (dict != null && dict.Count > 0)
{//存在
result = bfclient.batchWriteProperty(new_materialCode, propDict);
if (!result)
{//失败
failureSaveMaterial = new FailureSaveMaterial();
failureSaveMaterial.failureReason = "第" + i.ToString() + "个修改物料信息失败";
failureSaveMaterial.failureCode = failureCode.savefail;
failureSaveMaterial.materialCode = model["materialCode"];
failureMaterialList.Add(failureSaveMaterial);
baseModel.FailureCount++;
}
else
{//成功
baseModel.SuccessCount++;
successMaterial.Add(model["materialCode"]);
}
}
else
{ //不存在
//逻辑删除标记记为0
propDict.Add("delFlag", "0"); //逻辑删除为不删除
result = bfclient.createMaterial(new_materialCode, "");
if (result)
{
result = bfclient.batchWriteProperty(new_materialCode, propDict);
}
if (result)
{
baseModel.SuccessCount++;
successMaterial.Add(model["materialCode"]);
}
else
{
failureSaveMaterial = new FailureSaveMaterial();
failureSaveMaterial.failureReason = "第" + i.ToString() + "个修改物料信息失败";
failureSaveMaterial.failureCode = failureCode.savefail;
failureSaveMaterial.materialCode = model["materialCode"];
failureMaterialList.Add(failureSaveMaterial);
baseModel.FailureCount++;
}
}
}
//去掉这里的逻辑 【EditBy shaocx,2019-01-22】
/*
* //获取所有物料号
* //如果所有的物料号大于同步的物料号，那么多余出来的物料号要修改删除标记为1，表示已删除
* string[] allMaterials = bfclient.getAllMaterials();
* if (allMaterials != null && allMaterials.Length > 0)
* {
* if (modelList.Count < allMaterials.Length)
* {
* foreach (var item in allMaterials)
* {
* if (!materialCodeList.Contains(item))
* {//数据库里有，但是推送的内容里没有
* bfclient.writeProperty(item, "delFlag", "1");//逻辑删除
* }
* }
* }
* }
*
* //*/
baseModel.SuccessMaterial = successMaterial;
baseModel.FailureMaterial = failureMaterialList;
if (baseModel.FailureCount > 0)
{
exception.exceptionMsg = ResMsg.FAILURE;
exception.exceptionData = JsonConvert.SerializeObject(baseModel);
return(BLLHelpler.GetReturnBody <BaseDataSynResultModel>(ResCode.FAILURE, ResMsg.FAILURE, exception, baseModel));
}
else
{
return(BLLHelpler.GetReturnBody <BaseDataSynResultModel>(ResCode.SUCCESS, ResMsg.SUCCESS));
}
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
return(BLLHelpler.GetReturnBody <BaseDataSynResultModel>(ResCode.FAILURE, ResMsg.FAILURE, exception));
}
}
/// <summary>
/// 插入代码项表
/// </summary>
/// <param name="model"></param>
/// <returns></returns>
public ReturnBody <string> InsertCodeItems(CodeItemsEntity model)
{
ReturnBody <string> retBody = null;
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <CodeItemsEntity>(namespaceName, "InsertCodeItems", model);
try
{
#region 验证
if (model == null)
{
exception.exceptionMsg = ResMsg.PARAMETERNOEMPTY;
retBody = BLLHelpler.GetReturnBody <string>(ResCode.PARAMETERNOEMPTY, ResMsg.PARAMETERNOEMPTY, exception);
return(retBody);
}
List <ColumnsModel> columnsList = new List <ColumnsModel>()
{
new ColumnsModel()
{
ChinaName = "代码项编码", PropertyName = "code"
},
new ColumnsModel()
{
ChinaName = "代码项名称", PropertyName = "name"
},
new ColumnsModel()
{
ChinaName = "代码编码", PropertyName = "setCode"
},
new ColumnsModel()
{
ChinaName = "说明", PropertyName = "note"
},
new ColumnsModel()
{
ChinaName = "创建时间", PropertyName = "createTime", DataType = typeof(DateTime), IsNullable = true
},
new ColumnsModel()
{
ChinaName = "修改时间", PropertyName = "lastModifyTime", DataType = typeof(DateTime), IsNullable = true
},
};
ValidateResModel res = ValidateDataHelper.ValidateNullOrEmpty <CodeItemsEntity>(columnsList, model);
if (res != null && !res.IsValidate)
{
exception.exceptionMsg = res.ValidateMsg;
retBody = BLLHelpler.GetReturnBody <string>(ResCode.PARAMETERNOEMPTY, res.ValidateMsg, exception);
return(retBody);
}
//验证重复
if (codeItemsBLL.Exists(model.setCode, model.code))
{
exception.exceptionMsg = "数据已经存在";
retBody = BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, exception.exceptionMsg, exception);
return(retBody);
}
#endregion
model.delFlag = false;
model.createTime = model.lastModifyTime = DateTime.Now;
if (codeItemsBLL.Add(model) > 0)
{
retBody = BLLHelpler.GetReturnBody <string>(ResCode.SUCCESS, ResMsg.SUCCESS);
}
else
{//失败
exception.exceptionMsg = "保存数据失败";
retBody = BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, exception.exceptionMsg, exception);
}
return(retBody);
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
retBody = BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, ResMsg.FAILURE + ":" + ex.Message, exception);
return(retBody);
}
}
/// <summary>
/// 更新代码集表
/// </summary>
/// <param name="model"></param>
/// <returns></returns>
public ReturnBody <string> UpdateCodeSets(CodeSetsEntity model)
{
ReturnBody <string> retBody = null;
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <CodeSetsEntity>(namespaceName, "UpdateCodeSets", model);
try
{
#region 验证
if (model == null || model.id == 0)
{
exception.exceptionMsg = ResMsg.PARAMETERNOEMPTY;
retBody = BLLHelpler.GetReturnBody <string>(ResCode.PARAMETERNOEMPTY, exception.exceptionMsg, exception);
return(retBody);
}
List <ColumnsModel> columnsList = new List <ColumnsModel>()
{
new ColumnsModel()
{
ChinaName = "代码编码", PropertyName = "code"
},
new ColumnsModel()
{
ChinaName = "代码名称", PropertyName = "name"
},
new ColumnsModel()
{
ChinaName = "说明", PropertyName = "note"
},
new ColumnsModel()
{
ChinaName = "创建时间", PropertyName = "createTime", DataType = typeof(DateTime), IsNullable = true
},
new ColumnsModel()
{
ChinaName = "修改时间", PropertyName = "lastModifyTime", DataType = typeof(DateTime), IsNullable = true
},
};
ValidateResModel res = ValidateDataHelper.ValidateNullOrEmpty <CodeSetsEntity>(columnsList, model);
if (res != null && !res.IsValidate)
{
exception.exceptionMsg = res.ValidateMsg;
retBody = BLLHelpler.GetReturnBody <string>(ResCode.PARAMETERNOEMPTY, exception.exceptionMsg, exception);
return(retBody);
}
//验证重复
if (codeSetsBLL.Exists(model.code.ToString(), model.id))
{
exception.exceptionMsg = "数据已经存在";
retBody = BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, exception.exceptionMsg, exception);
return(retBody);
}
#endregion
bool result = codeSetsBLL.Update(model);
if (result)
{
retBody = BLLHelpler.GetReturnBody <string>(ResCode.SUCCESS, ResMsg.SUCCESS);
}
else
{
exception.exceptionMsg = "更新失败";
retBody = BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, exception.exceptionMsg, exception);
}
return(retBody);
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
retBody = BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, ResMsg.FAILURE + ":" + ex.Message, exception);
return(retBody);
}
}
/// <summary>
/// 插入打印配置
/// </summary>
/// <param name="model"></param>
/// <returns></returns>
public ReturnBody <string> InsertPrintConfig(PrintConfigEntity model)
{
ReturnBody <string> retBody = null;
ExceptionInfoEntity exception = WipLogHelper.GetExceptionInfo <PrintConfigEntity>(namespaceName, "InsertPrintConfig", model);
try
{
#region 验证
if (model == null)
{
exception.exceptionMsg = ResMsg.PARAMETERNOEMPTY;
retBody = BLLHelpler.GetReturnBody <string>(ResCode.PARAMETERNOEMPTY, ResMsg.PARAMETERNOEMPTY, exception);
return(retBody);
}
List <ColumnsModel> columnsList = new List <ColumnsModel>()
{
new ColumnsModel()
{
ChinaName = "打印类型", PropertyName = "printType"
},
new ColumnsModel()
{
ChinaName = "打印类型描述", PropertyName = "printTypeName"
},
new ColumnsModel()
{
ChinaName = "打印机名称", PropertyName = "printerName"
},
new ColumnsModel()
{
ChinaName = "打印模板", PropertyName = "printTemplete"
}
};
ValidateResModel res = ValidateDataHelper.ValidateNullOrEmpty <PrintConfigEntity>(columnsList, model);
if (res != null && !res.IsValidate)
{
exception.exceptionMsg = res.ValidateMsg;
retBody = BLLHelpler.GetReturnBody <string>(ResCode.PARAMETERNOEMPTY, res.ValidateMsg, exception);
return(retBody);
}
//验证重复
if (printConfigBLL.Exists(model.printType.ToString()))
{
exception.exceptionMsg = "数据已经存在";
retBody = BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, exception.exceptionMsg, exception);
return(retBody);
}
#endregion
model.delFlag = false;
model.createTime = model.lastModifyTime = DateTime.Now;
if (printConfigBLL.Add(model) > 0)
{
retBody = BLLHelpler.GetReturnBody <string>(ResCode.SUCCESS, ResMsg.SUCCESS);
}
else
{//失败
exception.exceptionMsg = "保存数据失败";
retBody = BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, exception.exceptionMsg, exception);
}
return(retBody);
}
catch (Exception ex)
{
WipLogHelper.GetExceptionInfoForError(ex, ref exception);
retBody = BLLHelpler.GetReturnBody <string>(ResCode.FAILURE, ResMsg.FAILURE + ":" + ex.Message, exception);
return(retBody);
}
}