/// <summary>
/// Print the params of the digester to a string, to be displayed on a console
/// </summary>
/// <returns>string for console</returns>
public string print()
{
StringBuilder sb = new StringBuilder();
sb.Append(" ---------- DIGESTER: " + name + " ---------- \r\n");
sb.Append("id: " + id + "\r\n");
sb.Append(" Vtot= " + Vtot.printValue("0") + "\t\t\t");
sb.Append("Vliq= " + Vliq.printValue("0") + "\t\t\t");
sb.Append("Vgas= " + Vgas.Value.ToString("0") + "\n");
sb.Append(" Vliqmax= " + Vliqmax.printValue("0") + "\t\t\t");
sb.Append("Vgasmax= " + Vgasmax.printValue("0") + "\t\t\t");
sb.Append("T= " + T.printValue("0.0") + "\n");
sb.Append(" diam= " + diam.printValue("0.0") + "\t\t\t");
sb.Append("hwall= " + height.printValue("0.0") + "\t\t\t");
sb.Append("hroof= " + h_roof.printValue("0.0") + "\n");
sb.Append(" Awall= " + Awall.printValue("0.0") + "\t\t\t");
sb.Append("Aroof= " + Aroof.printValue("0.0") + "\t\t\t");
sb.Append("Aground= " + Aground.printValue("0.0") + "\n");
sb.Append(" k_wall= " + k_wall.printValue("0.00") + "\t\t");
sb.Append("k_roof= " + k_roof.printValue("0.00") + "\t\t");
sb.Append("k_ground= " + k_ground.printValue("0.00") + "\r\n");
sb.Append(" accum_x= " + accum_x.ToString("0.00") + "\t\t\t");
sb.Append("accum_s= " + accum_s.ToString("0.00") + "\r\n");
// heating
sb.Append(heating.print());
sb.Append(mixers.print()); // stirrer
//
sb.Append(" ---------- ---------- ---------- ---------- \n");
return(sb.ToString());
}
// -------------------------------------------------------------------------------------
// !!! PUBLIC METHODS !!!
// -------------------------------------------------------------------------------------
///// <summary>
///// Calculate needed thermal power to heat the substrate flow Q
///// up to the temperature inside the digester. Q is measured in m³/d
///// </summary>
///// <param name="Q">volumetric flow rate of substrates in m^3/d</param>
///// <param name="mySubstrates"></param>
///// <param name="Pel_kWh_d">thermal or electrical energy per day</param>
///// <param name="Pel_kW">thermal or electrical power</param>
///// <exception cref="exception">Q.Length != mySubstrates.Count</exception>
///// <exception cref="exception">efficiency is zero, division by zero</exception>
//public void heatInputSubstrates(double[] Q, substrates mySubstrates,
// out physValue Pel_kWh_d,
// out physValue Pel_kW)
//{
// heating.heatSubstrates(Q, mySubstrates, T, out Pel_kWh_d, out Pel_kW);
//}
///// <summary>
///// Calculate needed thermal power to heat the substrate flow Q
///// up to the temperature inside the digester. Q is measured in m³/d
///// </summary>
///// <param name="Q">volumetric flow rate of substrates in m^3/d</param>
///// <param name="mySubstrates"></param>
///// <param name="Pel_kWh_d">thermal or electrical energy per day</param>
///// <exception cref="exception">Q.Length != mySubstrates.Count</exception>
///// <exception cref="exception">efficiency is zero, division by zero</exception>
//public void heatInputSubstrates(double[] Q, substrates mySubstrates,
// out physValue Pel_kWh_d)
//{
// heating.heatSubstrates(Q, mySubstrates, T, out Pel_kWh_d);
//}
/// <summary>
/// Calculate thermal power get lost due to radiation through the
/// digester surface.
///
/// TODO: at the moment power is always positive, would it be a problem if
/// it is negative, where is it called? outside hotter than inside of digester, no
/// problem
/// </summary>
/// <param name="pT_ambient">ambient temperature</param>
/// <returns>thermal power get lost in W</returns>
public physValue calcHeatLossDueToRadiation(physValue pT_ambient)
{
physValue T_ambient = pT_ambient.convertUnit("°C");
_T = T.convertUnit("°C");
_k_wall = k_wall.convertUnit("W/(m^2 * K)");
physValue myAwall = Awall.convertUnit("m^2");
// In Ganzheitliche stoffliche und energetische Modellierung S. 56
// eine ausführliche Formel zur Berechnung des Wärmeübergangs bei
// mehrschichtige wänden
// P_{radiation,loss} [W]= Atot * h_{th} * ( T_{digester} - T_{ambient} )
//
// [ W ]= [ m^2 * W/(m^2 * K) * K ]$$
//
// Achtung: es ist total falsch eine temperaturdifferenz im nachhinein
// in Kelvin zu konvertieren. vorher beide temperaturen in Kelvin
// dann differenz bilden
//
physValue P_radiation_loss_wall = myAwall * _k_wall *
/*physValue.max*/ (_T.convertUnit("K") - T_ambient.convertUnit("K")/*,
* new physValue(0, "°C")*/
);
//
_k_roof = k_roof.convertUnit("W/(m^2 * K)");
physValue myAroof = Aroof.convertUnit("m^2");
//
// Achtung: es ist total falsch eine temperaturdifferenz im nachhinein
// in Kelvin zu konvertieren. vorher beide temperaturen in Kelvin
// dann differenz bilden
//
physValue P_radiation_loss_roof = myAroof * _k_roof *
/*physValue.max*/ (_T.convertUnit("K") - T_ambient.convertUnit("K")/*,
* new physValue(0, "°C")*/
);
//
_k_ground = k_ground.convertUnit("W/(m^2 * K)");
physValue myAground = Aground.convertUnit("m^2");
// Achtung: es ist total falsch eine temperaturdifferenz im nachhinein
// in Kelvin zu konvertieren. vorher beide temperaturen in Kelvin
// dann differenz bilden
physValue P_radiation_loss_ground = myAground * _k_ground *
/*physValue.max*/ (_T.convertUnit("K") - T_ambient.convertUnit("K")/*,
* new physValue(0, "°C")*/
);
//
physValue P_radiation_sum = P_radiation_loss_wall + P_radiation_loss_roof + P_radiation_loss_ground;
P_radiation_sum.Symbol = "P_rad_sum";
return(P_radiation_sum);
}
