Esempio n. 1
0
        public FrameSequence(IStreamReader reader) : base(reader)
        {
            // FRAME = Frame Begin LineFormat AreaFormat [GELFRAME] [SHAPEPROPS] End

            // Frame
            this.Frame = (Frame)BiffRecord.ReadRecord(reader);

            // Begin
            this.Begin = (Begin)BiffRecord.ReadRecord(reader);

            // LineFormat
            this.LineFormat = (LineFormat)BiffRecord.ReadRecord(reader);

            // AreaFormat
            this.AreaFormat = (AreaFormat)BiffRecord.ReadRecord(reader);

            // [GELFRAME]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.GelFrame)
            {
                this.GelFrameSequence = new GelFrameSequence(reader);
            }

            // [SHAPEPROPS]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.ShapePropsStream)
            {
                this.ShapePropsSequence = new ShapePropsSequence(reader);
            }

            // End
            this.End = (End)BiffRecord.ReadRecord(reader);
        }
Esempio n. 2
0
        public AxsSequence(IStreamReader reader)
            : base(reader)
        {
            //AXS = [IFmtRecord] [Tick] [FontX] *4(AxisLine LineFormat) [AreaFormat] [GELFRAME] *4SHAPEPROPS [TextPropsStream *ContinueFrt12]

            //[IFmtRecord]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.IFmtRecord)
            {
                this.IFmtRecord = (IFmtRecord)BiffRecord.ReadRecord(reader);
            }

            //[Tick]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.Tick)
            {
                this.Tick = (Tick)BiffRecord.ReadRecord(reader);
            }

            //[FontX]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.FontX)
            {
                this.FontX = (FontX)BiffRecord.ReadRecord(reader);
            }

            //*4(AxisLine LineFormat)
            this.AxisLineFormatGroups = new List <AxisLineFormatGroup>();
            while (BiffRecord.GetNextRecordType(reader) == RecordType.AxisLine)
            {
                this.AxisLineFormatGroups.Add(new AxisLineFormatGroup(reader));
            }

            //[AreaFormat]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.AreaFormat)
            {
                this.AreaFormat = (AreaFormat)BiffRecord.ReadRecord(reader);
            }

            //[GELFRAME]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.GelFrame)
            {
                this.GelFrame = (GelFrame)BiffRecord.ReadRecord(reader);
            }

            //*4SHAPEPROPS
            this.ShapePropsSequences = new List <ShapePropsSequence>();
            while (BiffRecord.GetNextRecordType(reader) == RecordType.ShapePropsStream)
            {
                this.ShapePropsSequences.Add(new ShapePropsSequence(reader));
            }

            //[TextPropsStream *ContinueFrt12]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.TextPropsStream)
            {
                this.TextPropsStream = (TextPropsStream)BiffRecord.ReadRecord(reader);
                while (BiffRecord.GetNextRecordType(reader) == RecordType.ContinueFrt12)
                {
                    this.ContinueFrt12s.Add((ContinueFrt12)BiffRecord.ReadRecord(reader));
                }
            }
        }
Esempio n. 3
0
 private static void ProcessAreaFormat(AreaFormat af, XmlWriter xmlw)
 {
     xmlw.WriteStartElement("AreaFormat");
     xmlw.WriteAttributeString("EnableHideForDrillDown", af.EnableHideForDrillDown.ToStringSafe());
     xmlw.WriteAttributeString("EnableKeepTogether", af.EnableKeepTogether.ToStringSafe());
     xmlw.WriteAttributeString("EnableNewPageAfter", af.EnableNewPageAfter.ToStringSafe());
     xmlw.WriteAttributeString("EnableNewPageBefore", af.EnableNewPageBefore.ToStringSafe());
     xmlw.WriteAttributeString("EnablePrintAtBottomOfPage", af.EnablePrintAtBottomOfPage.ToStringSafe());
     xmlw.WriteAttributeString("EnableResetPageNumberAfter", af.EnableResetPageNumberAfter.ToStringSafe());
     xmlw.WriteAttributeString("EnableSuppress", af.EnableSuppress.ToStringSafe());
     xmlw.WriteEndElement();
 }
Esempio n. 4
0
        private static void GetAreaFormat(AreaFormat areaFormat, XmlWriter writer)
        {
            WriteAndTraceStartElement(writer, "AreaFormat");

            writer.WriteAttributeString("EnableHideForDrillDown", areaFormat.EnableHideForDrillDown.ToString());
            writer.WriteAttributeString("EnableKeepTogether", areaFormat.EnableKeepTogether.ToString());
            writer.WriteAttributeString("EnableNewPageAfter", areaFormat.EnableNewPageAfter.ToString());
            writer.WriteAttributeString("EnableNewPageBefore", areaFormat.EnableNewPageBefore.ToString());
            writer.WriteAttributeString("EnablePrintAtBottomOfPage", areaFormat.EnablePrintAtBottomOfPage.ToString());
            writer.WriteAttributeString("EnableResetPageNumberAfter", areaFormat.EnableResetPageNumberAfter.ToString());
            writer.WriteAttributeString("EnableSuppress", areaFormat.EnableSuppress.ToString());

            writer.WriteEndElement();
        }
Esempio n. 5
0
        private void insertFillProperties(AreaFormat areaFormat, GelFrameSequence gelFrameSequence)
        {
            // EG_FillProperties (from AreaFormat)
            if (areaFormat != null)
            {
                if (gelFrameSequence != null && gelFrameSequence.GelFrames.Count > 0)
                {
                    insertDrawingFillProperties(areaFormat, (ShapeOptions)gelFrameSequence.GelFrames[0].OPT1);
                }
                else
                {
                    if (areaFormat.fls == 0x0000)
                    {
                        // a:noFill (CT_NoFillProperties)
                        this._writer.WriteElementString(Dml.Prefix, Dml.ShapeEffects.ElNoFill, Dml.Ns, string.Empty);
                    }
                    else if (areaFormat.fls == 0x0001)
                    {
                        RGBColor fillColor;
                        if (this.ChartSheetContentSequence.Palette != null && areaFormat.icvFore >= 0x0000 && areaFormat.icvFore <= 0x0041)
                        {
                            // there is a valid palette color set
                            fillColor = this.ChartSheetContentSequence.Palette.rgbColorList[areaFormat.icvFore];
                        }
                        else
                        {
                            fillColor = areaFormat.rgbFore;
                        }
                        // a:solidFill (CT_SolidColorFillProperties)
                        this._writer.WriteStartElement(Dml.Prefix, Dml.ShapeEffects.ElSolidFill, Dml.Ns);
                        writeValueElement(Dml.Prefix, Dml.BaseTypes.ElSrgbClr, Dml.Ns, fillColor.SixDigitHexCode.ToUpper());
                        this._writer.WriteEndElement(); // a:solidFill
                    }

                    // a:gradFill (CT_GradientFillProperties)

                    // a:blipFill (CT_BlipFillProperties)

                    // a:pattFill (CT_PatternFillProperties)

                    // a:grpFill (CT_GroupFillProperties)
                }
            }
        }
Esempio n. 6
0
 get => string.Format(AreaFormat, Area);
Esempio n. 7
0
        private static void GetAreaFormat(AreaFormat areaFormat, XmlWriter writer)
        {
            WriteAndTraceStartElement(writer, "AreaFormat");

            writer.WriteAttributeString("EnableHideForDrillDown", areaFormat.EnableHideForDrillDown.ToString());
            writer.WriteAttributeString("EnableKeepTogether", areaFormat.EnableKeepTogether.ToString());
            writer.WriteAttributeString("EnableNewPageAfter", areaFormat.EnableNewPageAfter.ToString());
            writer.WriteAttributeString("EnableNewPageBefore", areaFormat.EnableNewPageBefore.ToString());
            writer.WriteAttributeString("EnablePrintAtBottomOfPage", areaFormat.EnablePrintAtBottomOfPage.ToString());
            writer.WriteAttributeString("EnableResetPageNumberAfter", areaFormat.EnableResetPageNumberAfter.ToString());
            writer.WriteAttributeString("EnableSuppress", areaFormat.EnableSuppress.ToString());

            writer.WriteEndElement();
        }
Esempio n. 8
0
        private void insertDrawingFillProperties(AreaFormat areaFormat, ShapeOptions so)
        {
            var rgbFore = areaFormat.rgbFore;
            var rgbBack = areaFormat.rgbBack;

            uint fillType = 0;

            if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillType))
            {
                fillType = so.OptionsByID[ShapeOptions.PropertyId.fillType].op;
            }
            switch (fillType)
            {
            case 0x0:     //solid
                // a:solidFill (CT_SolidColorFillProperties)
                this._writer.WriteStartElement(Dml.Prefix, Dml.ShapeEffects.ElSolidFill, Dml.Ns);
                {
                    // a:srgbColor
                    this._writer.WriteStartElement(Dml.Prefix, Dml.BaseTypes.ElSrgbClr, Dml.Ns);
                    this._writer.WriteAttributeString(Dml.BaseTypes.AttrVal, rgbFore.SixDigitHexCode.ToUpper());
                    this._writer.WriteEndElement(); // a:srgbColor
                }
                this._writer.WriteEndElement();     // a:solidFill
                break;

            case 0x1:     //pattern
                //uint blipIndex1 = so.OptionsByID[ShapeOptions.PropertyId.fillBlip].op;
                //DrawingGroup gr1 = (DrawingGroup)this._ctx.Ppt.DocumentRecord.FirstChildWithType<PPDrawingGroup>().Children[0];
                //BlipStoreEntry bse1 = (BlipStoreEntry)gr1.FirstChildWithType<BlipStoreContainer>().Children[(int)blipIndex1 - 1];
                //BitmapBlip b1 = (BitmapBlip)_ctx.Ppt.PicturesContainer._pictures[bse1.foDelay];

                //_writer.WriteStartElement(Dml.Prefix, "pattFill", Dml.Ns);

                //_writer.WriteAttributeString("prst", Utils.getPrstForPatternCode(b1.m_bTag)); //Utils.getPrstForPattern(blipNamePattern));

                //_writer.WriteStartElement(Dml.Prefix, "fgClr", Dml.Ns);
                //_writer.WriteStartElement(Dml.Prefix, "srgbClr", Dml.Ns);
                //_writer.WriteAttributeString("val", Utils.getRGBColorFromOfficeArtCOLORREF(so.OptionsByID[ShapeOptions.PropertyId.fillColor].op, slide, so));
                //_writer.WriteEndElement();
                //_writer.WriteEndElement();

                //_writer.WriteStartElement(Dml.Prefix, "bgClr", Dml.Ns);
                //_writer.WriteStartElement(Dml.Prefix, "srgbClr", Dml.Ns);
                //if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillBackColor))
                //{
                //    colorval = Utils.getRGBColorFromOfficeArtCOLORREF(so.OptionsByID[ShapeOptions.PropertyId.fillBackColor].op, slide, so);
                //}
                //else
                //{
                //    colorval = "ffffff"; //TODO: find out which color to use in this case
                //}
                //_writer.WriteAttributeString("val", colorval);
                //_writer.WriteEndElement();
                //_writer.WriteEndElement();

                //_writer.WriteEndElement();

                break;

            case 0x2:     //texture
            case 0x3:     //picture
                //uint blipIndex = 0;
                //if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillBlip))
                //{
                //    blipIndex = so.OptionsByID[ShapeOptions.PropertyId.fillBlip].op;
                //}
                //else
                //{
                //    blipIndex = so.OptionsByID[ShapeOptions.PropertyId.Pib].op;
                //}

                ////string blipName = Encoding.UTF8.GetString(so.OptionsByID[ShapeOptions.PropertyId.fillBlipName].opComplex);
                //string rId = "";
                //DrawingGroup gr = (DrawingGroup)this._ctx.Ppt.DocumentRecord.FirstChildWithType<PPDrawingGroup>().Children[0];

                //if (blipIndex <= gr.FirstChildWithType<BlipStoreContainer>().Children.Count)
                //{
                //    BlipStoreEntry bse = (BlipStoreEntry)gr.FirstChildWithType<BlipStoreContainer>().Children[(int)blipIndex - 1];

                //    if (_ctx.Ppt.PicturesContainer._pictures.ContainsKey(bse.foDelay))
                //    {
                //        Record rec = _ctx.Ppt.PicturesContainer._pictures[bse.foDelay];
                //        ImagePart imgPart = null;
                //        if (rec is BitmapBlip)
                //        {
                //            BitmapBlip b = (BitmapBlip)_ctx.Ppt.PicturesContainer._pictures[bse.foDelay];
                //            imgPart = _parentSlideMapping.targetPart.AddImagePart(ShapeTreeMapping.getImageType(b.TypeCode));
                //            imgPart.TargetDirectory = "..\\media";
                //            System.IO.Stream outStream = imgPart.GetStream();
                //            outStream.Write(b.m_pvBits, 0, b.m_pvBits.Length);
                //        }
                //        else
                //        {
                //            MetafilePictBlip b = (MetafilePictBlip)_ctx.Ppt.PicturesContainer._pictures[bse.foDelay];
                //            imgPart = _parentSlideMapping.targetPart.AddImagePart(ShapeTreeMapping.getImageType(b.TypeCode));
                //            imgPart.TargetDirectory = "..\\media";
                //            System.IO.Stream outStream = imgPart.GetStream();
                //            byte[] decompressed = b.Decrompress();
                //            outStream.Write(decompressed, 0, decompressed.Length);
                //        }

                //        rId = imgPart.RelIdToString;

                //        _writer.WriteStartElement(Dml.Prefix, "blipFill", Dml.Ns);
                //        _writer.WriteAttributeString("dpi", "0");
                //        _writer.WriteAttributeString("rotWithShape", "1");

                //        _writer.WriteStartElement(Dml.Prefix, "blip", Dml.Ns);
                //        _writer.WriteAttributeString("r", "embed", OpenXmlNamespaces.Relationships, rId);



                //        _writer.WriteEndElement();

                //        _writer.WriteElementString(Dml.Prefix, "srcRect", Dml.Ns, "");

                //        if (fillType == 0x3)
                //        {
                //            _writer.WriteStartElement(Dml.Prefix, "stretch", Dml.Ns);
                //            _writer.WriteElementString(Dml.Prefix, "fillRect", Dml.Ns, "");
                //            _writer.WriteEndElement();
                //        }
                //        else
                //        {
                //            _writer.WriteStartElement(Dml.Prefix, "tile", Dml.Ns);
                //            _writer.WriteAttributeString("tx", "0");
                //            _writer.WriteAttributeString("ty", "0");
                //            _writer.WriteAttributeString("sx", "100000");
                //            _writer.WriteAttributeString("sy", "100000");
                //            _writer.WriteAttributeString("flip", "none");
                //            _writer.WriteAttributeString("algn", "tl");
                //            _writer.WriteEndElement();
                //        }

                //        _writer.WriteEndElement();
                //    }
                //}
                break;

            case 0x4:     //shade
            case 0x5:     //shadecenter
            case 0x6:     //shadeshape
            case 0x7:     //shadescale
                this._writer.WriteStartElement(Dml.Prefix, "gradFill", Dml.Ns);
                this._writer.WriteAttributeString("rotWithShape", "1");
                {
                    this._writer.WriteStartElement(Dml.Prefix, "gsLst", Dml.Ns);
                    {
                        this._writer.WriteStartElement(Dml.Prefix, "gs", Dml.Ns);
                        this._writer.WriteAttributeString("pos", "0");

                        this._writer.WriteStartElement(Dml.Prefix, "srgbClr", Dml.Ns);
                        this._writer.WriteAttributeString("val", rgbFore.SixDigitHexCode.ToUpper());
                        //if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillOpacity))
                        //{
                        //    _writer.WriteStartElement(Dml.Prefix, "alpha", Dml.Ns);
                        //    _writer.WriteAttributeString("val", Math.Round(((decimal)so.OptionsByID[ShapeOptions.PropertyId.fillOpacity].op / 65536 * 100000)).ToString()); //we need the percentage of the opacity (65536 means 100%)
                        //    _writer.WriteEndElement();
                        //}
                        this._writer.WriteEndElement();
                        this._writer.WriteEndElement();

                        this._writer.WriteStartElement(Dml.Prefix, "gs", Dml.Ns);
                        this._writer.WriteAttributeString("pos", "100000");
                        this._writer.WriteStartElement(Dml.Prefix, "srgbClr", Dml.Ns);
                        this._writer.WriteAttributeString("val", rgbBack.SixDigitHexCode.ToUpper());
                        //if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillBackOpacity))
                        //{
                        //    _writer.WriteStartElement(Dml.Prefix, "alpha", Dml.Ns);
                        //    _writer.WriteAttributeString("val", Math.Round(((decimal)so.OptionsByID[ShapeOptions.PropertyId.fillBackOpacity].op / 65536 * 100000)).ToString()); //we need the percentage of the opacity (65536 means 100%)
                        //    _writer.WriteEndElement();
                        //}
                        this._writer.WriteEndElement();
                        this._writer.WriteEndElement();
                    }

                    this._writer.WriteEndElement();     //gsLst

                    switch (fillType)
                    {
                    case 0x5:
                    case 0x6:
                        this._writer.WriteStartElement(Dml.Prefix, "path", Dml.Ns);
                        this._writer.WriteAttributeString("path", "shape");
                        this._writer.WriteStartElement(Dml.Prefix, "fillToRect", Dml.Ns);
                        this._writer.WriteAttributeString("l", "50000");
                        this._writer.WriteAttributeString("t", "50000");
                        this._writer.WriteAttributeString("r", "50000");
                        this._writer.WriteAttributeString("b", "50000");
                        this._writer.WriteEndElement();
                        this._writer.WriteEndElement();         //path
                        break;

                    case 0x7:
                        decimal angle = 90;
                        if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillAngle))
                        {
                            if (so.OptionsByID[ShapeOptions.PropertyId.fillAngle].op != 0)
                            {
                                var     bytes      = BitConverter.GetBytes(so.OptionsByID[ShapeOptions.PropertyId.fillAngle].op);
                                int     integral   = BitConverter.ToInt16(bytes, 0);
                                uint    fractional = BitConverter.ToUInt16(bytes, 2);
                                decimal result     = integral + ((decimal)fractional / (decimal)65536);
                                angle = 65536 - fractional;         //I have no idea why this works!!
                                angle = angle - 90;
                                if (angle < 0)
                                {
                                    angle += 360;
                                }
                            }
                        }
                        this._writer.WriteStartElement(Dml.Prefix, "lin", Dml.Ns);

                        angle *= 60000;
                        if (angle > 5400000)
                        {
                            angle = 5400000;
                        }

                        this._writer.WriteAttributeString("ang", angle.ToString());
                        this._writer.WriteAttributeString("scaled", "1");
                        this._writer.WriteEndElement();
                        break;

                    default:
                        this._writer.WriteStartElement(Dml.Prefix, "path", Dml.Ns);
                        this._writer.WriteAttributeString("path", "rect");
                        this._writer.WriteStartElement(Dml.Prefix, "fillToRect", Dml.Ns);
                        this._writer.WriteAttributeString("r", "100000");
                        this._writer.WriteAttributeString("b", "100000");
                        this._writer.WriteEndElement();
                        this._writer.WriteEndElement();         //path
                        break;
                    }
                }
                this._writer.WriteEndElement();     //gradFill

                break;

            case 0x8:     //shadetitle
            case 0x9:     //background
                break;
            }
        }
Esempio n. 9
0
        public SsSequence(IStreamReader reader)
            : base(reader)
        {
            // SS = DataFormat Begin [Chart3DBarShape] [LineFormat AreaFormat PieFormat]
            // [SerFmt] [GELFRAME] [MarkerFormat] [AttachedLabel] *2SHAPEPROPS [CRTMLFRT] End

            //// SS = DataFormat Begin [Chart3DBarShape] [LineFormat AreaFormat PieFormat]
            //// [SerFmt] [LineFormat] [AreaFormat] [GELFRAME] [MarkerFormat] [AttachedLabel] *2SHAPEPROPS [CRTMLFRT] End

            // DataFormat
            this.DataFormat = (DataFormat)BiffRecord.ReadRecord(reader);

            // Begin
            this.Begin = (Begin)BiffRecord.ReadRecord(reader);

            // [Chart3DBarShape]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.Chart3DBarShape)
            {
                this.Chart3DBarShape = (Chart3DBarShape)BiffRecord.ReadRecord(reader);
            }

            // [LineFormat AreaFormat PieFormat]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.LineFormat)
            {
                this.LineFormat = (LineFormat)BiffRecord.ReadRecord(reader);
            }
            if (BiffRecord.GetNextRecordType(reader) == RecordType.AreaFormat)
            {
                this.AreaFormat = (AreaFormat)BiffRecord.ReadRecord(reader);
            }
            if (BiffRecord.GetNextRecordType(reader) == RecordType.PieFormat)
            {
                this.PieFormat = (PieFormat)BiffRecord.ReadRecord(reader);
            }


            //// this is for the case that LineFormat and AreaFormat
            //// exists and is behind the SerFmt which doesn't exists
            //if (this.PieFormat == null)
            //{
            //    if (this.LineFormat1 != null)
            //    {
            //        this.LineFormat2 = this.LineFormat1;
            //        this.LineFormat1 = null;
            //    }
            //    if (this.AreaFormat1 != null)
            //    {
            //        this.AreaFormat2 = this.AreaFormat1;
            //        this.AreaFormat1 = null;
            //    }
            //}

            // [SerFmt]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.SerFmt)
            {
                this.SerFmt = (SerFmt)BiffRecord.ReadRecord(reader);
            }

            // [LineFormat] [AreaFormat] [GELFRAME] [MarkerFormat] [AttachedLabel] End

            //if (BiffRecord.GetNextRecordType(reader) == RecordType.LineFormat)
            //{
            //    this.LineFormat2 = (LineFormat)BiffRecord.ReadRecord(reader);
            //}

            //// [AreaFormat]
            //if (BiffRecord.GetNextRecordType(reader) ==
            //    RecordType.AreaFormat)
            //{
            //    this.AreaFormat2 = (AreaFormat)BiffRecord.ReadRecord(reader);
            //}

            // [GELFRAME]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.GelFrame)
            {
                this.GelFrameSequence = new GelFrameSequence(reader);
            }

            // [MarkerFormat]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.MarkerFormat)
            {
                this.MarkerFormat = (MarkerFormat)BiffRecord.ReadRecord(reader);
            }

            // [AttachedLabel]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.AttachedLabel)
            {
                this.AttachedLabel = (AttachedLabel)BiffRecord.ReadRecord(reader);
            }

            // *2SHAPEPROPS
            this.ShapePropsSequences = new List <ShapePropsSequence>();
            while (BiffRecord.GetNextRecordType(reader) == RecordType.ShapePropsStream)
            {
                this.ShapePropsSequences.Add(new ShapePropsSequence(reader));
            }

            // [CRTMLFRT]
            if (BiffRecord.GetNextRecordType(reader) == RecordType.CrtMlFrt)
            {
                this.CrtMlfrtSequence = new CrtMlfrtSequence(reader);
            }

            // End
            this.End = (End)BiffRecord.ReadRecord(reader);
        }
        private void insertDrawingFillProperties(AreaFormat areaFormat, ShapeOptions so)
        {
            RGBColor rgbFore = areaFormat.rgbFore;
            RGBColor rgbBack = areaFormat.rgbBack;

            uint fillType = 0;

            if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillType))
            {
                fillType = so.OptionsByID[ShapeOptions.PropertyId.fillType].op;
            }
            switch (fillType)
            {
            case 0x0:     //solid
                // a:solidFill (CT_SolidColorFillProperties)
                _writer.WriteStartElement(Dml.Prefix, Dml.ShapeEffects.ElSolidFill, Dml.Ns);
                {
                    // a:srgbColor
                    _writer.WriteStartElement(Dml.Prefix, Dml.BaseTypes.ElSrgbClr, Dml.Ns);
                    _writer.WriteAttributeString(Dml.BaseTypes.AttrVal, rgbFore.SixDigitHexCode.ToUpper());
                    _writer.WriteEndElement(); // a:srgbColor
                }
                _writer.WriteEndElement();     // a:solidFill
                break;

            case 0x1:     //pattern
                //uint blipIndex1 = so.OptionsByID[ShapeOptions.PropertyId.fillBlip].op;
                //DrawingGroup gr1 = (DrawingGroup)this._ctx.Ppt.DocumentRecord.FirstChildWithType<PPDrawingGroup>().Children[0];
                //BlipStoreEntry bse1 = (BlipStoreEntry)gr1.FirstChildWithType<BlipStoreContainer>().Children[(int)blipIndex1 - 1];
                //BitmapBlip b1 = (BitmapBlip)_ctx.Ppt.PicturesContainer._pictures[bse1.foDelay];

                //_writer.WriteStartElement(Dml.Prefix, "pattFill", Dml.Ns);

                //_writer.WriteAttributeString("prst", Utils.getPrstForPatternCode(b1.m_bTag)); //Utils.getPrstForPattern(blipNamePattern));

                //_writer.WriteStartElement(Dml.Prefix, "fgClr", Dml.Ns);
                //_writer.WriteStartElement(Dml.Prefix, "srgbClr", Dml.Ns);
                //_writer.WriteAttributeString("val", Utils.getRGBColorFromOfficeArtCOLORREF(so.OptionsByID[ShapeOptions.PropertyId.fillColor].op, slide, so));
                //_writer.WriteEndElement();
                //_writer.WriteEndElement();

                //_writer.WriteStartElement(Dml.Prefix, "bgClr", Dml.Ns);
                //_writer.WriteStartElement(Dml.Prefix, "srgbClr", Dml.Ns);
                //if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillBackColor))
                //{
                //    colorval = Utils.getRGBColorFromOfficeArtCOLORREF(so.OptionsByID[ShapeOptions.PropertyId.fillBackColor].op, slide, so);
                //}
                //else
                //{
                //    colorval = "ffffff"; //TODO: find out which color to use in this case
                //}
                //_writer.WriteAttributeString("val", colorval);
                //_writer.WriteEndElement();
                //_writer.WriteEndElement();

                //_writer.WriteEndElement();

                break;

            case 0x2:     //texture
            case 0x3:     //picture
                //uint blipIndex = 0;
                //if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillBlip))
                //{
                //    blipIndex = so.OptionsByID[ShapeOptions.PropertyId.fillBlip].op;
                //}
                //else
                //{
                //    blipIndex = so.OptionsByID[ShapeOptions.PropertyId.Pib].op;
                //}

                ////string blipName = Encoding.UTF8.GetString(so.OptionsByID[ShapeOptions.PropertyId.fillBlipName].opComplex);
                //string rId = "";
                //DrawingGroup gr = (DrawingGroup)this._ctx.Ppt.DocumentRecord.FirstChildWithType<PPDrawingGroup>().Children[0];

                //if (blipIndex <= gr.FirstChildWithType<BlipStoreContainer>().Children.Count)
                //{
                //    BlipStoreEntry bse = (BlipStoreEntry)gr.FirstChildWithType<BlipStoreContainer>().Children[(int)blipIndex - 1];

                //    if (_ctx.Ppt.PicturesContainer._pictures.ContainsKey(bse.foDelay))
                //    {
                //        Record rec = _ctx.Ppt.PicturesContainer._pictures[bse.foDelay];
                //        ImagePart imgPart = null;
                //        if (rec is BitmapBlip)
                //        {
                //            BitmapBlip b = (BitmapBlip)_ctx.Ppt.PicturesContainer._pictures[bse.foDelay];
                //            imgPart = _parentSlideMapping.targetPart.AddImagePart(ShapeTreeMapping.getImageType(b.TypeCode));
                //            imgPart.TargetDirectory = "..\\media";
                //            System.IO.Stream outStream = imgPart.GetStream();
                //            outStream.Write(b.m_pvBits, 0, b.m_pvBits.Length);
                //        }
                //        else
                //        {
                //            MetafilePictBlip b = (MetafilePictBlip)_ctx.Ppt.PicturesContainer._pictures[bse.foDelay];
                //            imgPart = _parentSlideMapping.targetPart.AddImagePart(ShapeTreeMapping.getImageType(b.TypeCode));
                //            imgPart.TargetDirectory = "..\\media";
                //            System.IO.Stream outStream = imgPart.GetStream();
                //            byte[] decompressed = b.Decrompress();
                //            outStream.Write(decompressed, 0, decompressed.Length);
                //        }

                //        rId = imgPart.RelIdToString;

                //        _writer.WriteStartElement(Dml.Prefix, "blipFill", Dml.Ns);
                //        _writer.WriteAttributeString("dpi", "0");
                //        _writer.WriteAttributeString("rotWithShape", "1");

                //        _writer.WriteStartElement(Dml.Prefix, "blip", Dml.Ns);
                //        _writer.WriteAttributeString("r", "embed", OpenXmlNamespaces.Relationships, rId);



                //        _writer.WriteEndElement();

                //        _writer.WriteElementString(Dml.Prefix, "srcRect", Dml.Ns, "");

                //        if (fillType == 0x3)
                //        {
                //            _writer.WriteStartElement(Dml.Prefix, "stretch", Dml.Ns);
                //            _writer.WriteElementString(Dml.Prefix, "fillRect", Dml.Ns, "");
                //            _writer.WriteEndElement();
                //        }
                //        else
                //        {
                //            _writer.WriteStartElement(Dml.Prefix, "tile", Dml.Ns);
                //            _writer.WriteAttributeString("tx", "0");
                //            _writer.WriteAttributeString("ty", "0");
                //            _writer.WriteAttributeString("sx", "100000");
                //            _writer.WriteAttributeString("sy", "100000");
                //            _writer.WriteAttributeString("flip", "none");
                //            _writer.WriteAttributeString("algn", "tl");
                //            _writer.WriteEndElement();
                //        }

                //        _writer.WriteEndElement();
                //    }
                //}
                break;

            case 0x4:     //shade
            case 0x5:     //shadecenter
            case 0x6:     //shadeshape
            case 0x7:     //shadescale
                _writer.WriteStartElement(Dml.Prefix, "gradFill", Dml.Ns);
                _writer.WriteAttributeString("rotWithShape", "1");
                {
                    _writer.WriteStartElement(Dml.Prefix, "gsLst", Dml.Ns);
                    {
                        _writer.WriteStartElement(Dml.Prefix, "gs", Dml.Ns);
                        _writer.WriteAttributeString("pos", "0");

                        _writer.WriteStartElement(Dml.Prefix, "srgbClr", Dml.Ns);
                        _writer.WriteAttributeString("val", rgbFore.SixDigitHexCode.ToUpper());
                        //if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillOpacity))
                        //{
                        //    _writer.WriteStartElement(Dml.Prefix, "alpha", Dml.Ns);
                        //    _writer.WriteAttributeString("val", Math.Round(((decimal)so.OptionsByID[ShapeOptions.PropertyId.fillOpacity].op / 65536 * 100000)).ToString()); //we need the percentage of the opacity (65536 means 100%)
                        //    _writer.WriteEndElement();
                        //}
                        _writer.WriteEndElement();
                        _writer.WriteEndElement();

                        _writer.WriteStartElement(Dml.Prefix, "gs", Dml.Ns);
                        _writer.WriteAttributeString("pos", "100000");
                        _writer.WriteStartElement(Dml.Prefix, "srgbClr", Dml.Ns);
                        _writer.WriteAttributeString("val", rgbBack.SixDigitHexCode.ToUpper());
                        //if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillBackOpacity))
                        //{
                        //    _writer.WriteStartElement(Dml.Prefix, "alpha", Dml.Ns);
                        //    _writer.WriteAttributeString("val", Math.Round(((decimal)so.OptionsByID[ShapeOptions.PropertyId.fillBackOpacity].op / 65536 * 100000)).ToString()); //we need the percentage of the opacity (65536 means 100%)
                        //    _writer.WriteEndElement();
                        //}
                        _writer.WriteEndElement();
                        _writer.WriteEndElement();
                    }

                    _writer.WriteEndElement();     //gsLst

                    switch (fillType)
                    {
                    case 0x5:
                    case 0x6:
                        _writer.WriteStartElement(Dml.Prefix, "path", Dml.Ns);
                        _writer.WriteAttributeString("path", "shape");
                        _writer.WriteStartElement(Dml.Prefix, "fillToRect", Dml.Ns);
                        _writer.WriteAttributeString("l", "50000");
                        _writer.WriteAttributeString("t", "50000");
                        _writer.WriteAttributeString("r", "50000");
                        _writer.WriteAttributeString("b", "50000");
                        _writer.WriteEndElement();
                        _writer.WriteEndElement();         //path
                        break;

                    case 0x7:
                        decimal angle = 90;
                        if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillAngle))
                        {
                            if (so.OptionsByID[ShapeOptions.PropertyId.fillAngle].op != 0)
                            {
                                byte[]  bytes      = BitConverter.GetBytes(so.OptionsByID[ShapeOptions.PropertyId.fillAngle].op);
                                int     integral   = BitConverter.ToInt16(bytes, 0);
                                uint    fractional = BitConverter.ToUInt16(bytes, 2);
                                decimal result     = integral + ((decimal)fractional / (decimal)65536);
                                angle = 65536 - fractional;         //I have no idea why this works!!
                                angle = angle - 90;
                                if (angle < 0)
                                {
                                    angle += 360;
                                }
                            }
                        }
                        _writer.WriteStartElement(Dml.Prefix, "lin", Dml.Ns);

                        angle *= 60000;
                        if (angle > 5400000)
                        {
                            angle = 5400000;
                        }

                        _writer.WriteAttributeString("ang", angle.ToString());
                        _writer.WriteAttributeString("scaled", "1");
                        _writer.WriteEndElement();
                        break;

                    default:
                        _writer.WriteStartElement(Dml.Prefix, "path", Dml.Ns);
                        _writer.WriteAttributeString("path", "rect");
                        _writer.WriteStartElement(Dml.Prefix, "fillToRect", Dml.Ns);
                        _writer.WriteAttributeString("r", "100000");
                        _writer.WriteAttributeString("b", "100000");
                        _writer.WriteEndElement();
                        _writer.WriteEndElement();         //path
                        break;
                    }
                }
                _writer.WriteEndElement();     //gradFill

                break;
                //case 0x7: //shadescale
                //_writer.WriteStartElement(Dml.Prefix, "gradFill", Dml.Ns);
                //_writer.WriteAttributeString("rotWithShape", "1");
                //_writer.WriteStartElement(Dml.Prefix, "gsLst", Dml.Ns);

                //bool switchColors = false;
                //decimal angle = 90;
                //if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillAngle))
                //{
                //    if (so.OptionsByID[ShapeOptions.PropertyId.fillAngle].op != 0)
                //    {
                //        byte[] bytes = BitConverter.GetBytes(so.OptionsByID[ShapeOptions.PropertyId.fillAngle].op);
                //        int integral = BitConverter.ToInt16(bytes, 0);
                //        uint fractional = BitConverter.ToUInt16(bytes, 2);
                //        decimal result = integral + ((decimal)fractional / (decimal)65536);
                //        angle = 65536 - fractional; //I have no idea why this works!!
                //        angle = angle - 90;
                //        if (angle < 0)
                //        {
                //            angle += 360;
                //            switchColors = true;
                //        }
                //    }
                //}

                //Dictionary<int, string> shadeColorsDic = new Dictionary<int, string>();
                //List<string> shadeColors = new List<string>();
                //if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillShadeColors))
                //{
                //    uint length = so.OptionsByID[ShapeOptions.PropertyId.fillShadeColors].op;

                //    //An IMsoArray record that specifies colors and their relative positions.
                //    //Each element of the array contains an OfficeArtCOLORREF record color and a FixedPoint, as specified in [MS-OSHARED]
                //    //section 2.2.1.6, that specifies its relative position along the gradient vector.
                //    byte[] data = so.OptionsByID[ShapeOptions.PropertyId.fillShadeColors].opComplex;

                //    int pos = 0;
                //    string colval;
                //    FixedPointNumber fixedpoint;
                //    UInt16 nElems = BitConverter.ToUInt16(data, pos);
                //    pos += 2;
                //    UInt16 nElemsAlloc = BitConverter.ToUInt16(data, pos);
                //    pos += 2;
                //    UInt16 cbElem = BitConverter.ToUInt16(data, pos);
                //    pos += 2;

                //    if (cbElem == 0xFFF0)
                //    {
                //        //If this value is 0xFFF0 then this record is an array of truncated 8 byte elements. Only the 4 low-order bytes are recorded. Each element's 4 high-order bytes equal 0x00000000 and each element's 4 low-order bytes are contained in data.
                //    }
                //    else
                //    {
                //        while (pos < length)
                //        {
                //            colval = Utils.getRGBColorFromOfficeArtCOLORREF(BitConverter.ToUInt32(data, pos), slide, so);

                //            pos += 4;
                //            fixedpoint = new FixedPointNumber(BitConverter.ToUInt16(data, pos), BitConverter.ToUInt16(data, pos + 2));
                //            shadeColors.Insert(0, colval);
                //            pos += 4;
                //        }
                //    }

                //}
                //else
                //{
                //    bool switchcolors = false;
                //    if (switchColors & so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillBackColor))
                //    {
                //        colorval = Utils.getRGBColorFromOfficeArtCOLORREF(so.OptionsByID[ShapeOptions.PropertyId.fillBackColor].op, slide, so);
                //    }
                //    else
                //    {
                //        if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillColor))
                //        {
                //            colorval = Utils.getRGBColorFromOfficeArtCOLORREF(so.OptionsByID[ShapeOptions.PropertyId.fillColor].op, slide, so);
                //        }
                //        else
                //        {
                //            colorval = "FFFFFF"; //TODO: find out which color to use in this case
                //            switchcolors = true;
                //        }
                //    }

                //    if (switchColors | !so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillBackColor))
                //    {
                //        colorval2 = Utils.getRGBColorFromOfficeArtCOLORREF(so.OptionsByID[ShapeOptions.PropertyId.fillColor].op, slide, so);
                //    }
                //    else
                //    {
                //        colorval2 = Utils.getRGBColorFromOfficeArtCOLORREF(so.OptionsByID[ShapeOptions.PropertyId.fillBackColor].op, slide, so);
                //    }

                //    if (switchcolors)
                //    {
                //        //this is a workaround for a bug. Further analysis necessarry
                //        string dummy = colorval;
                //        colorval = colorval2;
                //        colorval2 = dummy;
                //    }

                //    shadeColors.Add(colorval);
                //    shadeColors.Add(colorval2);
                //}


                //int gspos;
                //string col;
                //for (int i = 0; i < shadeColors.Count; i++)
                //{
                //    col = shadeColors[i];
                //    if (i == 0)
                //    {
                //        gspos = 0;
                //    }
                //    else if (i == shadeColors.Count - 1)
                //    {
                //        gspos = 100000;
                //    }
                //    else
                //    {
                //        gspos = i * 100000 / shadeColors.Count;
                //    }

                //    _writer.WriteStartElement(Dml.Prefix, "gs", Dml.Ns);
                //    _writer.WriteAttributeString("pos", gspos.ToString());
                //    _writer.WriteStartElement(Dml.Prefix, "srgbClr", Dml.Ns);
                //    _writer.WriteAttributeString("val", col);
                //    if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillOpacity))
                //    {
                //        _writer.WriteStartElement(Dml.Prefix, "alpha", Dml.Ns);
                //        decimal alpha = Math.Round(((decimal)so.OptionsByID[ShapeOptions.PropertyId.fillOpacity].op / 65536 * 100000)); //we need the percentage of the opacity (65536 means 100%)
                //        _writer.WriteAttributeString("val", alpha.ToString(CultureInfo.InvariantCulture));
                //        _writer.WriteEndElement();
                //    }

                //    if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillShadeType))
                //    {
                //        uint flags = so.OptionsByID[ShapeOptions.PropertyId.fillShadeType].op;
                //        bool none = Tools.Utils.BitmaskToBool(flags, 0x1);
                //        bool gamma = Tools.Utils.BitmaskToBool(flags, 0x1 << 1);
                //        bool sigma = Tools.Utils.BitmaskToBool(flags, 0x1 << 2);
                //        bool band = Tools.Utils.BitmaskToBool(flags, 0x1 << 3);
                //        bool onecolor = Tools.Utils.BitmaskToBool(flags, 0x1 << 4);

                //        if (gamma) _writer.WriteElementString(Dml.Prefix, "gamma", Dml.Ns, "");
                //        if (band)
                //        {
                //            _writer.WriteStartElement(Dml.Prefix, "shade", Dml.Ns);
                //            _writer.WriteAttributeString("val", "37255");
                //            _writer.WriteEndElement();
                //        }
                //        if (gamma) _writer.WriteElementString(Dml.Prefix, "invGamma", Dml.Ns, "");
                //    }
                //    _writer.WriteEndElement();
                //    _writer.WriteEndElement();
                //}



                //////new colorval
                ////_writer.WriteStartElement(Dml.Prefix, "gs", Dml.Ns);
                ////_writer.WriteAttributeString("pos", "100000");
                ////_writer.WriteStartElement(Dml.Prefix, "srgbClr", Dml.Ns);
                ////_writer.WriteAttributeString("val", colorval2);
                ////if (so.OptionsByID.ContainsKey(ShapeOptions.PropertyId.fillBackOpacity))
                ////{
                ////    _writer.WriteStartElement(Dml.Prefix, "alpha", Dml.Ns);
                ////    _writer.WriteAttributeString("val", Math.Round(((decimal)so.OptionsByID[ShapeOptions.PropertyId.fillBackOpacity].op / 65536 * 100000)).ToString()); //we need the percentage of the opacity (65536 means 100%)
                ////    _writer.WriteEndElement();
                ////}

                ////_writer.WriteEndElement();
                ////_writer.WriteEndElement();

                //_writer.WriteEndElement(); //gsLst

                //_writer.WriteStartElement(Dml.Prefix, "lin", Dml.Ns);

                //angle *= 60000;
                //if (angle > 5400000) angle = 5400000;

                //_writer.WriteAttributeString("ang", angle.ToString());
                //_writer.WriteAttributeString("scaled", "1");
                //_writer.WriteEndElement();

                //_writer.WriteEndElement();
                break;

            case 0x8:     //shadetitle
            case 0x9:     //background
                break;
            }
        }