public static void Main()
{
#region debug
debugLed = new OutputPort(device.DebugLed, false);
debugBtn = new InputPort(device.Socket6.Pin3, false, Port.ResistorMode.Disabled);
ifDebug = false;
currentDebugBtnValue = false;
oldDebugBtnValue = false;
#endregion
// Initialisation des entrées
capteurFrontal = new AnalogInput(device.Socket9.AnalogInput3);
capteurGauche = new AnalogInput(device.Socket9.AnalogInput4);
capteurDroite = new AnalogInput(device.Socket9.AnalogInput5);
// Initialisation des sorties
roueDroite = new PWM(device.Socket11.Pwm7, 2500, (int)VITESSE_MAX_D, PWM.ScaleFactor.Microseconds, false);
roueGauche = new PWM(device.Socket11.Pwm8, 2500, (int)VITESSE_MAX_G, PWM.ScaleFactor.Microseconds, false);
// Démarrage des roues
roueGauche.Start();
roueDroite.Start();
while (true)
{
#region debug
/*
* currentDebugBtnValue = debugBtn.Read();
* if (currentDebugBtnValue == false && oldDebugBtnValue == true)
* {
* roueGauche.Duration++;
* }
*
* oldDebugBtnValue = currentDebugBtnValue;
*/
#endregion
// Calcul de la vitesse en fonction des données des capteurs
//double vitesseG = -((((capteurFrontal.Read() - 0.5) * 2.0) -0.5)- (capteurGauche.Read() - capteurDroite.Read())) / 2 * VMAX;
//double vitesseD = ((((capteurFrontal.Read() - 0.5) * 2.0) -0.5)+ (capteurGauche.Read() - capteurDroite.Read())) / 2 * VMAX;
double vitesseG = -(((capteurFrontal.Read() - 0.5) * 2.0) - 0.5) * VMAX;
double vitesseD = (((capteurFrontal.Read() - 0.5) * 2.0) - 0.5) * VMAX;
// Régulation des vitesses des roues
roueGauche.Duration = (uint)(VITESSE_MAX_G + vitesseG);
roueDroite.Duration = (uint)(VITESSE_MAX_D + vitesseD);
#region debug (affichage des données)
//Debug.Print("Capteurs : " + capteurDroite.Read() + " || " + capteurFrontal.Read() + " || " + capteurGauche.Read());
Debug.Print("Moteurs : " + roueDroite.Duration.ToString() + " || " + roueGauche.Duration.ToString());
#endregion
}
}
private static void ReadPhotoCell()
{
WriteLog(INFO, "Reading photocell");
//2014-09-24 loop testing showed max of 1 in full light, min of 0.09 with lights out
//2014-10-19 loop testing with soldered board and 3.3v showing light condition as lower value, dark condition approaching 1
photocellReading = photoCellPin.Read();
WriteLog(INFO, "Photocell raw value: " + photocellReading.ToString());
//may need to convert value here
//boundaries: 1 to 0.75
if (photocellReading >= 0.75 && photocellReading < 1)
{
photocellReadingLevel = 1; //dark
}
else if (photocellReading >= 0.5 && photocellReading <= 0.74)
{
photocellReadingLevel = 2; //twilight
}
else if (photocellReading <= 0.49)
{
photocellReadingLevel = 3; //light
}
}
static void SendFridgeReport()
{
// Generate egg positions
string eggPositions = ((eggReader0.Read() == true) ? "1" : "0") + ","
+ ((eggReader1.Read() == true) ? "1" : "0") + ","
+ ((eggReader2.Read() == true) ? "1" : "0") + ","
+ ((eggReader3.Read() == true) ? "1" : "0") + ","
+ ((eggReader4.Read() == true) ? "1" : "0") + ","
+ ((eggReader5.Read() == true) ? "1" : "0");
// Read weights
//double weightReader0 = 0.745;
//double weightReader1 = 0.00000;
weights[0] = CalculateWeight(weightReader0.Read());
weights[1] = CalculateWeight(weightReader1.Read());
#if CreatingJson
JsonObject jo = new JsonObject();
jo.Add("eggs", eggPositions);
jo.Add("fridgeid", fridgeId.ToString());
jo.Add("slot1weight", weights[0].ToString());
jo.Add("slot2weight", weights[1].ToString());
Debug.Print(jo.ToString());
#endif
#if SendingToSparkfun
// https://data.sparkfun.com/input/*********
try
{
byte[] postData = Encoding.UTF8.GetBytes(jo.ToString());
HttpWebRequest request = (HttpWebRequest)WebRequest.Create(@"http://data.sparkfun.com/input/********");
request.Method = "POST";
request.Headers.Add("Phant-Private-Key", "xxxxxxxxxxxxxx");
request.ContentType = "application/json";
request.ContentLength = postData.Length;
request.KeepAlive = false;
Debug.Print("request set");
Stream postDataStream = request.GetRequestStream();
postDataStream.Write(postData, 0, postData.Length);
postDataStream.Close();
HttpWebResponse response = (HttpWebResponse)request.GetResponse();
request.Dispose();
Debug.Print(response.StatusCode.ToString());
Debug.Print("response done");
}
catch (Exception ex)
{
Debug.Print(ex.Message.ToString());
}
#endif
}
/// <summary>
/// Sensor Tests for Relay Control
/// </summary>
/// <param name="WaterLevel">Water Level Sensor</param>
/// <param name="LDR">LDR Sensor</param>
/// <param name="MotionDetection"> Motion Detection Sensor</param>
static void sensorTest(AnalogInput WaterLevel, AnalogInput LDR, AnalogInput MotionDetection)
{
if (!sensorAction((WaterLevel.Read() * 100), waterLimit))
{ //Stop the pumping water relay
RelayController(RelaySelection(1), false); //In this case, 1st Relay will be closed
timeMode = false;
}
else
{
RelayController(RelaySelection(1), true);
timeMode = true;
}
if (sensorAction((LDR.Read() * 100), ldrLimit))
{ //If LDR shows value that is under 20, then close chicken's door
RelayController(RelaySelection(4), true); //In this case, 4th Relay will be opened
timeMode = false;
}
else
{
RelayController(RelaySelection(4), false);
timeMode = true;
}
if (sensorAction((MotionDetection.Read() * 100), motionLimit))
{ //If motion is understood, then open the light
RelayController(RelaySelection(6), true); //In this case, 6nd Relay will be opened
timeMode = false;
}
else
{
RelayController(RelaySelection(6), false);
timeMode = true;
}
}
public static void Main()
{
AnalogInput capt = new AnalogInput((Cpu.AnalogChannel)Cpu.AnalogChannel.ANALOG_0);
OutputPort dir = new OutputPort(FEZSpider.Socket8.Pin9, true);
InputPort microswitch = new InputPort(FEZSpider.Socket4.Pin3, false, Port.ResistorMode.PullDown);
double frequence = 38000; // Période en microseconde
double rapportCyclique = 0.5; // Période en microseconde
PWM motorDriver = new PWM(FEZSpider.Socket8.Pwm7, frequence, rapportCyclique, false);
motorDriver.Stop();
while (true)
{
if (microswitch.Read())
{
motorDriver.Stop();
}
Debug.Print("Distance : " + capt.Read().ToString());
Debug.Print(microswitch.Read().ToString());
Thread.Sleep(50);
}
}
public static void Main()
{
var currentState = GetCurrentState();
Debug.Print(currentState);
AnalogInput analogInput = new AnalogInput(AnalogChannels.ANALOG_PIN_A0);
var data = analogInput.Read() * 10D;
try
{
var setStateResult = SetCurrentState((int)data);
Debug.Print(setStateResult);
}
catch (WebException wex)
{
//I expect this to time out - the gateway blocks the call and my netduino is going to
//give up before completing.
Debug.Print("Call did not return, check state manually");
}
while (true)
{
currentState = GetCurrentState();
Debug.Print(currentState);
Thread.Sleep(5000);
}
}
public static void MeasureBattery()
{
const double AVG = 4.0;
double ad5, ad6, mVr;
int mV5, mV6;
// param read
ad5 = 0;
ad6 = 0;
for (int i = 0; i < 4; i++)
{
ad5 += Ain5.Read();
ad6 += Ain6.Read();
}
ad5 /= AVG;
ad6 /= AVG;
mV6 = (int)(3300.0 * ad6 + 0.5);
iBatt[battIdx] = mV6 / RCURR;
mV5 = (int)(3300.0 * ad5 + 0.5);
mVr = (3300.0 * ad5 * (10.0 + 15.0)) / 15.0 + 0.5;
vBatt[battIdx] = (int)mVr - mV6;
}
public static void Main()
{
AnalogInput analogSensor1 = new AnalogInput
(
Pins.Analog.Socket1Pin1
//Pins.Analog.Socket2Pin1
//Pins.Analog.Socket3Pin1
//Pins.Analog.Socket4Pin1
);
AnalogInput analogSensor2 = new AnalogInput
(
Pins.Analog.Socket1Pin2
//Pins.Analog.Socket2Pin2
//Pins.Analog.Socket3Pin2
//Pins.Analog.Socket4Pin2
);
Debug.Print("Program running");
while (true)
{
double sensorValue1 = analogSensor1.Read();
double sensorValue2 = analogSensor2.Read();
Debug.Print("Value 1:" + sensorValue1.ToString("F2") + " Value 2:" + sensorValue2.ToString("F2"));
Thread.Sleep(500);
}
}
public double Read()
{
var analogValue = _analogInput.Read();
// now, if we want, we can calculate the number of volts by multiplying
// the converted value by 3.3
var voltageValue = analogValue * 3.3;//convert analog_x-->voltage value(v)
var rangeValue = voltageValue - _voltage;
var gramValue = rangeValue / 0.8;//calculate the gram value
if (gramValue > 1)
{
return(90);
}
if (gramValue < -1)
{
return(-90);
}
var degrees = System.Math.Asin(gramValue) * 180.0 / System.Math.PI;
var multiplier = System.Math.Pow(10, Precision);
return(System.Math.Round(degrees * multiplier) / multiplier);
}
private static void ReadPhotoCell()
{
WriteLog(INFO, "Reading photocell");
//2014-09-24 loop testing showed max of 1 in full light, min of 0.09 with lights out
photocellReading = photoCellPin.Read();
WriteLog(INFO, "Photocell raw value: " + photocellReading.ToString());
//may need to convert value here
//boundaries: 1 to 0.75
if (photocellReading >= 0.75 && photocellReading < 1)
{
photocellReadingLevel = 1; //dark
}
else if (photocellReading >= 0.5 && photocellReading <= 0.74)
{
photocellReadingLevel = 2; //twilight
}
else if (photocellReading <= 0.49)
{
photocellReadingLevel = 3; //light
}
}
public static void Main()
{
strip = new NeoPixelStrip(50, "LaughOMeter");
analogPin = new AnalogInput(Cpu.AnalogChannel.ANALOG_3);
while (true)
{
try
{
Debug.Print(analogPin.Read().ToString());
strip.SetLevel(((ushort)(analogPin.Read() * 100 / maxVal)), palette);
}
catch { }
Thread.Sleep(500);
}
}
//This loop polls the aio value set by the trimpot to determine the duty cycle which
// determines the amplitude on the sin curve of a given itteration.
private void SinLEDLoop(AnalogInput pot, PWM led, OutputPort relay, LCD_Display display)
{
double startValue = 0;
bool laststate = false;
double potValue = 0.0;
TimeSpan lastPeak = Utility.GetMachineTime();
while (true)
{
potValue = pot.Read();
startValue += .5 * potValue;
if (startValue > 2 * System.Math.PI)
{
startValue = 0;
laststate = !laststate;
//relay.Write(laststate);
if (display != null)
{
display.writeValue("Frequency: " + getFreq(lastPeak) + " Hz");
}
lastPeak = Utility.GetMachineTime();
}
Thread.Sleep(5);
led.DutyCycle = System.Math.Max(0, System.Math.Sin(startValue));
}
}
public static void Main()
{
// AnalogInput przetwarza różnicę poziomów pomiędzy 0 a 3,3V na 1024 poziomy odczytu, lub liczbę niecałkowitą z zakresu 0;1
AnalogInput lux = new AnalogInput(AnalogChannels.ANALOG_PIN_A0);
// SerialPort połączony jest na COM2 (piny 2 i 3) do modułu Bluetooth na parametrach 38400, 8, N, 1
SerialPort sp = new SerialPort(SerialPorts.COM2, 38400, Parity.None, 8, StopBits.One);
sp.Open();
// na wieczność
while (true)
{
// wykonaj odczyt, przetwórz na string, dodaj znak końca linii
var data = lux.Read().ToString() + "\r\n";
Debug.Print(data);
// wyślij przez Bluetooth
var buf = Encoding.UTF8.GetBytes(data);
sp.Write(buf, 0, buf.Length);
// czekaj 200 milisekund do następnego pomiaru
Thread.Sleep(200);
}
sp.Close();
}
/// <summary>
/// Calculate Temperature value
/// </summary>
/// <returns>Float value of current Temperature reading</returns>
/// <remarks>Assuming AREF of 3.3v, the default for Rev. B Netduino Plus boards.
/// It's an internal value, no feed to AREF required.
/// Using code tutorial from adafruit http://www.ladyada.net/learn/sensors/thermistor.html </remarks>
private float CalculateTemperature()
{
AnalogInput ain = new AnalogInput(AnalogChannels.ANALOG_PIN_A0);
// take 10 readings to even out the noise
float average = 0.0F;
for (int i = 0; i < 10; i++)
{
average += (int)ain.Read();
}
average /= 10;
if (average == 0)
{
return(10.0F);
}
// convert to a resistance
average = 1023 / average - 1;
average = SeriesResistor / average;
// apply steinhart
float tempValue = average / ThermistorNominal;
tempValue = Extensions.Math.Log(tempValue);
tempValue /= BetaCoefficient;
tempValue += 1.0F / (TemperatureNominal + 273.15F);
tempValue = 1.0F / tempValue;
tempValue -= 273.15F;
ain.Dispose();
return(tempValue);
}
private double get_voltage(AnalogInput input)
{
// read a digital value from the ADC
double digitalValue = input.Read();
// convert digital value to analog voltage value
return(digitalValue * AnalogReference);
}
public static void Main()
{
var axisX = new AnalogInput(Pins.GPIO_PIN_A0);
var axisY = new AnalogInput(Pins.GPIO_PIN_A1);
var axisZ = new AnalogInput(Pins.GPIO_PIN_A2);
var IrFloorSensor = new AnalogInput(Pins.GPIO_PIN_A3);
var out1 = new OutputPort(Pins.GPIO_PIN_D1, false);
var out2 = new OutputPort(Pins.GPIO_PIN_D12, false);
var in1 = new InputPort(Pins.GPIO_PIN_D2, false, Port.ResistorMode.Disabled);
var in2 = new InputPort(Pins.GPIO_PIN_D4, false, Port.ResistorMode.PullUp);
var servo1 = new PWM(Pins.GPIO_PIN_D9);
servo1.SetDutyCycle(0);
var servo2 = new PWM(Pins.GPIO_PIN_D10);
servo2.SetDutyCycle(0);
var stopWatch = Stopwatch.StartNew();
stopWatch.Start();
int i = 0;
bool digState = false;
while (i < 5000)
{
axisX.Read();
axisY.Read();
axisZ.Read();
IrFloorSensor.Read();
in1.Read();
in2.Read();
digState = !digState;
out1.Write(digState);
out2.Write(digState);
servo1.SetPulse(20000, 1500);
servo2.SetPulse(20000, 1500);
i++;
}
stopWatch.Stop();
Debug.Print("Elapsed: " + stopWatch.ElapsedMilliseconds.ToString());
}
public AnalogInputPin(Cpu.AnalogChannel pin, double updateFrequency = DefaultUpdateFrequency)
: base(updateFrequency)
{
input = new AnalogInput(pin, -1);
var initialValue = input.Read();
Analog = AddPort("Analog", Units.Ratio, initialValue);
}
public static void Main()
{
OutputPort led = new OutputPort(Pins.ONBOARD_LED, false);
AnalogInput an0 = new AnalogInput(AnalogChannels.ANALOG_PIN_A0);
//an0. SetRange(0, 100);
trimpot = an0.Read().ToString();
Listener webServer = new Listener(RequestReceived);
while (true)
{
// Blink LED to show we're still responsive
led.Write(!led.Read());
trimpot = an0.Read().ToString();
Thread.Sleep(500);
}
}
/// <summary>
/// Read the sensor output and convert the sensor readings into acceleration values.
/// </summary>
public void Update()
{
X = ((_x.Read() * SupplyVoltage) - _zeroGVoltage) / XVoltsPerG;
Y = ((_y.Read() * SupplyVoltage) - _zeroGVoltage) / YVoltsPerG;
Z = ((_z.Read() * SupplyVoltage) - _zeroGVoltage) / ZVoltsPerG;
if ((_updateInterval != 0) &&
((Math.Abs(X - _lastX) > AccelerationChangeNotificationThreshold) ||
(Math.Abs(Y - _lastY) > AccelerationChangeNotificationThreshold) ||
(Math.Abs(Z - _lastZ) > AccelerationChangeNotificationThreshold)))
{
Vector lastNotifiedReading = new Vector(_lastX, _lastY, _lastZ);
Vector currentReading = new Vector(X, Y, Z);
_lastX = X;
_lastY = Y;
_lastZ = Z;
AccelerationChanged(this, new SensorVectorEventArgs(lastNotifiedReading, currentReading));
}
}
public static void Main()
{
//tidy up
File.Delete("\\SD\\Data.csv");
try
{
//retrive and set device time via NTP
var networkTime = NtpClient.GetNetworkTime();
Utility.SetLocalTime(networkTime);
_macAddress = GetMAC();
_blobClient = new BlobClient(AccountName, AccountKey);
_tableClient = new TableClient(AccountName, AccountKey);
_tableClient.CreateTable("netmfdata");
_onBoardButton = new InterruptPort(Pins.ONBOARD_SW1, true,
Port.ResistorMode.Disabled,
Port.InterruptMode.InterruptEdgeHigh);
_onBoardButton.OnInterrupt += onBoardButton_OnInterrupt;
_analogInput = new AnalogInput(AnalogChannels.ANALOG_PIN_A0);
}
catch (Exception ex)
{
Debug.Print("Error setting up Device: " + ex.ToString());
}
int counter = 0;
while (true)
{
counter++;
var data = _analogInput.Read() * 40D;
_tableClient.AddTableEntityForTemperature("netmfdata", _macAddress, counter.ToString(), DateTime.Now, data, "UK");
lock (Padlock)
{
using (FileStream fs = File.Open("\\SD\\Data.csv", FileMode.Append, FileAccess.Write))
{
Debug.Print(data.ToString());
var dataBytes = Encoding.UTF8.GetBytes(
StringUtility.Format("{0}, {1}, {2}\r\n",
_macAddress, DateTime.Now.ToString(),
data)
);
fs.Write(dataBytes, 0, dataBytes.Length);
fs.Flush();
}
}
Thread.Sleep(1000);
Debug.Print("Working");
}
}
public static void Main()
{
AnalogInput capt = new AnalogInput((Cpu.AnalogChannel)Cpu.AnalogChannel.ANALOG_0);
while (true)
{
Debug.Print("Distance : " + capt.Read().ToString());
Thread.Sleep(250);
}
}
public static bool CheckReady()
{
bool state = false;
if (activePin.Read() >= 0.9)
{
state = true;
}
return(state);
}
public static void Main()
{
DeviceAssist.SetupDefault();
try
{
if (File.Exists("\\SD\\Data.csv"))
{
File.Delete("\\SD\\Data.csv");
}
_onBoardButton = new InterruptPort(Pins.ONBOARD_SW1, true,
Port.ResistorMode.Disabled,
Port.InterruptMode.InterruptEdgeHigh);
_onBoardButton.OnInterrupt += onBoardButton_OnInterrupt;
_macAddress = "holding";
_blobClient = new BlobClient(new netmfazurestorage.Account.CloudStorageAccount(AccountName, AccountKey));
}
catch (Exception ex)
{
//there was an error setting up the device
throw;
}
_analogInput = new AnalogInput(AnalogChannels.ANALOG_PIN_A0);
int counter = 0;
while (true)
{
counter++;
var data = _analogInput.Read() * 40D;
lock (Padlock)
{
using (FileStream fs = File.Open("\\SD\\Data.csv", FileMode.Append, FileAccess.Write))
{
Debug.Print(data.ToString());
var dataBytes = Encoding.UTF8.GetBytes(
StringUtility.Format("{0}, {1}, {2}\r\n",
_macAddress, DateTime.Now.ToString(),
data)
);
fs.Write(dataBytes, 0, dataBytes.Length);
fs.Flush();
}
}
System.Threading.Thread.Sleep(1000);
Debug.Print("Working");
}
}
/// <summary>
/// Returns a new sample.
/// If the sensor is not open, Open is called first.
/// Postconditions
/// Result is double
/// (Result greaterOrEqual MinValue) && (Result lessOrEqual MaxValue)
/// </summary>
public object HandleGet()
{
if (port == null)
{
Open();
}
double value = port.Read();
// NETMF has already done the scaling
return(value);
}
protected int ReadAverageDistance(AnalogInput analogInput)
{
var count = AverageMeasurementCount;
var total = 0;
while (--count >= 0)
{
total += analogInput.Read();
}
return(total / AverageMeasurementCount);
}
public static void Main()
{
AnalogInput dial = new AnalogInput(Cpu.AnalogChannel.ANALOG_0);
while (true)
{
Thread.Sleep(100);
Debug.Print(dial.Read().ToString());
}
;
}
private void UpdateSensors()
{
_left = photoCellL.Read();
_right = photoCellR.Read();
//_bottomLeft = photoCellBL.Read();
//_bottomRight = photoCellBR.Read();
Debug.Print("TL: " + _left);
Debug.Print("TR: " + _right);
//Debug.Print("BL: " + _bottomLeft);
//Debug.Print("TR: " + _bottomRight);
}
public double ReadDistance()
{
var total = 0d;
var min = double.MaxValue;
var max = double.MinValue;
var count = _data.Length;
for (int i = 0; i < count; i++)
{
var raw = _input.Read();
_data[i] = raw;
total += raw;
if (raw < min)
{
min = raw;
}
if (raw > max)
{
max = raw;
}
}
var average = total / count;
var stDev = StandardDeviation(_data, average);
if (stDev > 0.01)
{
var position = 0;
min = average - stDev;
max = average + stDev;
for (int i = 0; i < count; i++)
{
var data = _data[i];
if (data > min && data < max)
{
_data[position++] = data;
}
}
average = Average(_data, position);
}
var volts = average * 3.3;
return(8.30330497051182 * Math.Pow(volts, 6d)
- 89.8292932369688 * Math.Pow(volts, 5d)
+ 391.808954977875 * Math.Pow(volts, 4d)
- 885.170571942885 * Math.Pow(volts, 3d)
+ 1106.23720332132 * Math.Pow(volts, 2d)
- 753.770168858126 * volts
+ 250.173288592975);
}
//This is the method that gets run by the threadpool persistently... notice its name is
//listed above as a parameter...
private void DumpAccelData()
{
//keeps track of the current index in the packet... notice how it increments
// as we continue adding data to it...
var currentDataIndex = MetaDataCount;
//get our stopwatch's elapsed ms, stick it in our packet
var time = BitConverter.GetBytes(Clock.Instance.ElapsedMilliseconds);
_dataArray[currentDataIndex++] = time[0];
_dataArray[currentDataIndex++] = time[1];
_dataArray[currentDataIndex++] = time[2];
//anything beyond simply filling RAM with data is S-L-O-W on the .NetMF due to the
// overhead associated with it.
//
//The switch statement decides whether we're on x, y, or z... our first index is
//0, and 0 % 3 is 0, so it makes sense to store x here...
// 1 % 3 is 1, so it makes sense to store y here... and so on.
for (var i = 0; i < _dataCount / 2; i++)
{
short raw = 0;
switch (i % 3)
{
case 0:
raw = (short)(XPin.Read() * 1000);
break;
case 1:
raw = (short)(YPin.Read() * 1000);
break;
case 2:
raw = (short)(ZPin.Read() * 1000);
break;
}
var msb = (byte)((raw >> 8) & 0xFF);
var lsb = (byte)(raw & 0xff);
_dataArray[currentDataIndex++] = msb;
_dataArray[currentDataIndex++] = lsb;
}
time = BitConverter.GetBytes(Clock.Instance.ElapsedMilliseconds);
//last 8 bytes store end time stamp
_dataArray[currentDataIndex++] = time[0];
_dataArray[currentDataIndex++] = time[1];
_dataArray[currentDataIndex] = time[2];
//pass this off to the packet so it gets recorded to the sd card.
Array.Copy(_dataArray, _workItem.PacketData, _dataArray.Length);
}
public static void Main()
{
var photoresistor = new AnalogInput(Pins.GPIO_PIN_A3);
int ambientLight = 0;
int averageAmbientLight = 0;
float sensorVoltage = 0;
float lightThresholdVoltage = 0.85f;
float darkThresholdVoltage = 2.1f;
// setup an array to hold our samples
int numberOfSamplesToAverage = 3;
int[] previousSamples = new int[numberOfSamplesToAverage];
for (int i = 0; i < numberOfSamplesToAverage; i++)
{
previousSamples[i] = 0;
}
while (true)
{
// read the analog input
ambientLight = photoresistor.Read();
// average (oversample) the last two readings
averageAmbientLight = AverageAndStore(ref previousSamples, ambientLight);
// convert the digital value back to voltage
// sensorVoltage = AnalogValueToVoltage(ambientLight);
sensorVoltage = AnalogValueToVoltage(averageAmbientLight);
// output
Debug.Print("Light Level = Raw: " + ambientLight.ToString() +
", Average: " + averageAmbientLight.ToString() +
", Voltage: " + AnalogValueToVoltage(averageAmbientLight).ToString());
if (sensorVoltage < lightThresholdVoltage)
{
Debug.Print("Very bright.");
}
else if (sensorVoltage > darkThresholdVoltage)
{
Debug.Print("Dark.");
}
else
{
Debug.Print("Moderately Bright.");
}
// wait 1/4 second
Thread.Sleep(250);
}
}
/// <summary>
/// Calculate Temperature value
/// </summary>
/// <returns>Float value of current Temperature reading</returns>
/// <remarks>Assuming AREF of 3.3v, the default for Rev. B Netduino Plus boards.
/// It's an internal value, no feed to AREF required.
/// Using code tutorial from adafruit http://www.ladyada.net/learn/sensors/thermistor.html </remarks>
private float CalculateTemperature()
{
AnalogInput ain = new AnalogInput(Pins.GPIO_PIN_A0);
// take 10 readings to even out the noise
float average = 0.0F;
for (int i = 0; i < 10; i++) { average += ain.Read(); }
average /= 10;
// convert to a resistance
average = 1023 / average - 1;
average = SeriesResistor / average;
// apply steinhart
float tempValue = average / ThermistorNominal;
tempValue = Controller.Math.Log(tempValue);
tempValue /= BetaCoefficient;
tempValue += 1.0F / (TemperatureNominal + 273.15F);
tempValue = 1.0F / tempValue;
tempValue -= 273.15F;
ain.Dispose();
return tempValue;
}