/// <summary>
/// Reader出貨流程 -2016-02-23
/// 1.檢查ReaderId是否存在於Reader主檔
/// 2.更新或新增數據至Reader主檔(需自行設定顧客識別符號與卡機種別)
/// 3.根據原來的SAM UID將SAM表格資料備份到SAMDIFF
/// 4.刪除SAM表格原來UID的數據
/// 5.重新新增此UID的資料到SAM表格
/// </summary>
/// <param name="obDB">DB模組</param>
/// <param name="uid">SAM UID(OSN)14 hex string</param>
/// <param name="deviceId">卡機DeviceId:32 hex string</param>
/// <param name="reader_type">卡機種別, 00:沒卡機、01:NEC R6 卡機、02:MPG/CRF 卡機、03:CASTLES/V5s 卡機</param>
/// <param name="merc_flg">顧客識別符號, ex:"SET"</param>
public void Shipment_Reader(AL_DBModule obDB, string uid, string deviceId, string reader_type, string merc_flg)
{
string readerId = (Sql_Getter_Reader_D.Reader_Head + uid);//'86' + osn
bool flag = false;
//1.檢查ReaderId是否存在於Reader主檔
if (this.Check_ReaderId_FromReader_D(obDB, readerId))
{
//更新Reader主檔
flag = this.Update_FromReader_D(obDB, uid, deviceId, reader_type, merc_flg);
}
else
{
//新增Reader主檔
flag = this.Insert_FromReader_D(obDB, uid, deviceId, reader_type, merc_flg);
}
if (flag)
{
TransactionOptions option = new TransactionOptions();
option.IsolationLevel = System.Transactions.IsolationLevel.RepeatableRead;
option.Timeout = new TimeSpan(0, 0, 10);//10sec
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required, option))
{
//1.依據UID將SAM_D表格資料備份到SAMDIFF_D表格
this.Copy_SAM_D_To_SAMDIFF(obDB, uid);
//2.依據UID刪除SAM_D資料
this.Delete_SAM_D(obDB, uid);
//3.依據UID新增一筆資料到SAM_D
this.Insert_SAM_D(obDB, uid);
scope.Complete();
}
}
}
/// <summary>
/// 依據uid(osn)將SAM主檔的Row data備份到SAMDIFF_D表格
/// </summary>
/// <param name="obDB"></param>
/// <param name="uid">SAM UID(14 hex string)</param>
/// <returns>true:新增成功/false:新增數據無變動</returns>
protected bool Copy_SAM_D_To_SAMDIFF(AL_DBModule obDB, string uid)
{
try
{
//判斷資料庫連線有無開啟
if (obDB != null && obDB.ALCon.State != ConnectionState.Open)
{
obDB.ALCon.Open();
}
}
catch (SqlException ex)
{
Debug.WriteLine(ex);
throw ex;
}
catch (Exception ex)
{
throw ex;
}
//SqlMod_Chk_Bkl BkL = new SqlMod_Chk_Bkl();//產生sql指令
//Sql_Getter_SAM_D operate_SAM_D = new Sql_Getter_SAM_D();
SqlParameter[] SqlParamSet = null;
String sSql; //查詢SQL
try
{
//依據uid(osn)將SAM主檔的Row data備份到SAMDIFF_D表格
//operate_SAM_D.Insert_To_SAMDIFF_D(uid, out sSql, out SqlParamSet,"21");
this.Operate_SAM_D.Insert_To_SAMDIFF_D(uid, out sSql, out SqlParamSet, "21");
string result = obDB.SqlExec1(sSql, SqlParamSet);
if (IsDebugWriteLine)
{
Debug.WriteLine("Result:" + ((result == "1") ? "Success" : "NoneChange"));
}
return((result == "1") ? true : false);
}
catch (SqlException sqlEx)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Copy_SAM_D_To_SADDIFF]Sql Error:" + sqlEx.Message);
}
throw sqlEx;
}
catch (Exception ex)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Copy_SAM_D_To_SADDIFF]Error:" + ex.Message);
}
throw ex;
}
finally
{
//operate_SAM_D = null;
Array.Resize(ref SqlParamSet, 0);
}
}
/// <summary>
/// 依據OSN來刪除SAM主檔一筆Row data
/// </summary>
/// <param name="obDB">DB連線模組</param>
/// <param name="uid">SAM UID</param>
protected void Delete_SAM_D(AL_DBModule obDB, string uid)
{
try
{
//判斷資料庫連線有無開啟
if (obDB != null && obDB.ALCon.State != ConnectionState.Open)
{
obDB.ALCon.Open();
}
}
catch (SqlException ex)
{
Debug.WriteLine(ex);
throw ex;
}
catch (Exception ex)
{
throw ex;
}
//Sql_Getter_SAM_D operate_SAM_D = new Sql_Getter_SAM_D();//產生sql指令
SqlParameter[] SqlParamSet = null;
String sSql; //查詢SQL
try
{
//依據uid(osn)將SAM主檔的Row data刪除
//operate_SAM_D.Delete(uid, out sSql, out SqlParamSet);
this.Operate_SAM_D.Delete(uid, out sSql, out SqlParamSet);
string result = obDB.SqlExec1(sSql, SqlParamSet);
if (IsDebugWriteLine)
{
Debug.WriteLine("Result:" + ((result == "1") ? "Success" : "NoneChange"));
}
//return (result == "1") ? true : false;
}
catch (SqlException sqlEx)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Delete_SAM_D]Sql Error:" + sqlEx.Message);
}
throw sqlEx;
}
catch (Exception ex)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Delete_SAM_D]Error:" + ex.Message);
}
throw ex;
}
finally
{
//operate_SAM_D = null;
Array.Resize(ref SqlParamSet, 0);
}
}
/// <summary>
/// 依據ReaderId 新增Reader主檔
/// SAM uid(14 hex string), deviceId(16 bytes)
/// 取得更新Reader主檔的SQL參數和命令
/// </summary>
/// <param name="obDB">DB連線模組</param>
/// <param name="uid">SAM uid(14 hex string)</param>
/// <param name="deviceId">deviceId(16 bytes)</param>
/// <returns>true:新增成功/false:新增後數據無變動</returns>
protected bool Insert_FromReader_D(AL_DBModule obDB, string uid, string deviceId)
{
try
{
//判斷資料庫連線有無開啟
if (obDB != null && obDB.ALCon.State != ConnectionState.Open)
{
obDB.ALCon.Open();
}
}
catch (SqlException ex)
{
Debug.WriteLine(ex);
throw ex;
}
catch (Exception ex)
{
throw ex;
}
//Sql_Getter_Reader_D operate_Reader_D = new Sql_Getter_Reader_D();//產生sql指令
SqlParameter[] SqlParamSet = null;
String sSql; //查詢SQL
try
{
//依據ReaderId('86' + uid)新增Reader主檔
//operate_Reader_D.Insert(uid, deviceId, out sSql, out SqlParamSet);
this.Operate_Reader_D.Insert(uid, deviceId, out sSql, out SqlParamSet);
string result = obDB.SqlExec1(sSql, SqlParamSet);
if (IsDebugWriteLine)
{
Debug.WriteLine("Result:" + ((result == "1") ? "Success" : "NoneChange"));
}
return((result == "1") ? true : false);
}
catch (SqlException sqlEx)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Insert_FromReader_D]Sql Error:" + sqlEx.Message);
}
throw sqlEx;
}
catch (Exception ex)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Insert_FromReader_D]Error:" + ex.Message);
}
throw ex;
}
finally
{
//operate_Reader_D = null;
Array.Resize(ref SqlParamSet, 0);
}
}
/// <summary>
/// 依據卡機UID和M_Kind檢查是否存在於SAM主檔
/// </summary>
/// <param name="obDB">DB連線模組</param>
/// <param name="uid">卡機UID(7 bytes=>14 hex string)</param>
/// <param name="m_kind">卡片代別(default:21)</param>
/// <returns>true:存在/false:不存在</returns>
public bool Check_ReaderId_FromSAM_D(AL_DBModule obDB,string uid,string m_kind)
{
try
{
//判斷資料庫連線有無開啟
if (obDB != null && obDB.ALCon.State != ConnectionState.Open)
{
obDB.ALCon.Open();
}
}
catch (SqlException ex)
{
Console.WriteLine(ex);
throw ex;
}
catch (Exception ex)
{
throw ex;
}
//SqlMod_Chk_Bkl BkL = new SqlMod_Chk_Bkl();//產生sql指令
//Sql_Getter_SAM_D operate_SAM_D = new Sql_Getter_SAM_D();
SqlParameter[] SqlParamSet = null;
String sSql; //查詢SQL
try
{
m_kind = String.IsNullOrEmpty(m_kind) ? "21" : m_kind;
//檢查ReaderId('86' + uid)是否存在於SAM主檔
//operate_SAM_D.Exist_ReaderId(uid, out sSql, out SqlParamSet, m_kind);
this.Operate_SAM_D.Exist_OSN(uid, out sSql, out SqlParamSet, m_kind);
string result = obDB.SqlExecuteScalarHasParams(sSql, SqlParamSet);
return (result == "0" || result == "") ? false : true;
}
catch (SqlException sqlEx)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Check_ReaderId_FromSAM_D]Sql Error:" + sqlEx.Message);
}
throw sqlEx;
}
catch (Exception ex)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Check_ReaderId_FromSAM_D]Error:" + ex.Message);
}
throw ex;
}
finally
{
//operate_SAM_D = null;
Array.Resize(ref SqlParamSet, 0);
}
}
/// <summary>
/// 依據卡機UID和M_Kind檢查是否存在於SAM主檔
/// </summary>
/// <param name="obDB">DB連線模組</param>
/// <param name="uid">卡機UID(7 bytes=>14 hex string)</param>
/// <param name="m_kind">卡片代別(default:21)</param>
/// <returns>true:存在/false:不存在</returns>
public bool Check_ReaderId_FromSAM_D(AL_DBModule obDB, string uid, string m_kind)
{
try
{
//判斷資料庫連線有無開啟
if (obDB != null && obDB.ALCon.State != ConnectionState.Open)
{
obDB.ALCon.Open();
}
}
catch (SqlException ex)
{
Console.WriteLine(ex);
throw ex;
}
catch (Exception ex)
{
throw ex;
}
//SqlMod_Chk_Bkl BkL = new SqlMod_Chk_Bkl();//產生sql指令
//Sql_Getter_SAM_D operate_SAM_D = new Sql_Getter_SAM_D();
SqlParameter[] SqlParamSet = null;
String sSql; //查詢SQL
try
{
m_kind = String.IsNullOrEmpty(m_kind) ? "21" : m_kind;
//檢查ReaderId('86' + uid)是否存在於SAM主檔
//operate_SAM_D.Exist_ReaderId(uid, out sSql, out SqlParamSet, m_kind);
this.Operate_SAM_D.Exist_OSN(uid, out sSql, out SqlParamSet, m_kind);
string result = obDB.SqlExecuteScalarHasParams(sSql, SqlParamSet);
return((result == "0" || result == "") ? false : true);
}
catch (SqlException sqlEx)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Check_ReaderId_FromSAM_D]Sql Error:" + sqlEx.Message);
}
throw sqlEx;
}
catch (Exception ex)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Check_ReaderId_FromSAM_D]Error:" + ex.Message);
}
throw ex;
}
finally
{
//operate_SAM_D = null;
Array.Resize(ref SqlParamSet, 0);
}
}
/// <summary>
/// 初始化靜態集合DicBanks,從DB取得銀行最後更新狀態
/// </summary>
private bool InitDicBanks()
{
AL_DBModule obDB = null;
try
{
log.Debug("開始初始化銀行狀態列表");
#region 1.取得資料物件列表
//建立DB模組
obDB = new AL_DBModule();
//建立Network_Msg模組
Network_Msg network_Msg_Module = new Network_Msg();
//開啟連線
obDB.OpenConnection();
//從DB取得銀行連線狀態的table
DataTable dt = network_Msg_Module.Get_NetMsgAll(obDB);
//建立對應用的字典集合key=物件屬性名稱/value=Row的Column名稱
//Dictionary<string,string> dic = new Dictionary<string,string>();
//dic.Add("","BANK_CODE");
//dic.Add("","STATUS");
//dic.Add("","INFO_CODE");
////dic.Add("","REMARK");
//dic.Add("","MOD_TIME");
//將DataTable Mapping成List<NETWORK_MSG>資料物件列表
IList <NETWORK_MSG> bankStatus = Extensions.ToList <NETWORK_MSG>(dt);
#endregion
#region 2.初始化DicBanks內容
foreach (NETWORK_MSG item in bankStatus)
{
string key = item.BANK_CODE.PadLeft(4, '0');//key = 銀行代碼(3碼->4碼),Value = NETWORK_MSG Object
this.DicBanks.Add(key, item);
log.Debug(">> DicBanks[" + key + "] => \n" + item.ToString());
}
//表示已初始化完畢
return(true);
#endregion
}
catch (Exception ex)
{
log.Error(">> [AbsClientRequestHandler][InitDicBanks] Error:" + ex.ToString());
return(false);
}
finally
{
if (obDB != null)
{
obDB.CloseConnection();//關閉連線
}
}
}
/// <summary>
/// 依據卡機ReaderId檢查是否存在於Reader主檔
/// </summary>
/// <param name="obDB">DB連線模組</param>
/// <param name="readerId">卡機ReaderId(14 hex string)</param>
/// <returns>true:存在/false:不存在</returns>
protected bool Check_ReaderId_FromReader_D(AL_DBModule obDB, string readerId)
{
try
{
//判斷資料庫連線有無開啟
if (obDB != null && obDB.ALCon.State != ConnectionState.Open)
{
obDB.ALCon.Open();
}
}
catch (SqlException ex)
{
Debug.WriteLine(ex);
throw ex;
}
catch (Exception ex)
{
throw ex;
}
//Sql_Getter_Reader_D operate_Reader_D = new Sql_Getter_Reader_D();//產生sql指令
SqlParameter[] SqlParamSet = null;
String sSql; //查詢SQL
try
{
//檢查ReaderId('86' + uid)是否存在於SAM主檔
//operate_Reader_D.Exist_ReaderId(readerId, out sSql, out SqlParamSet);
this.Operate_Reader_D.Exist_ReaderId(readerId, out sSql, out SqlParamSet);
string result = obDB.SqlExecuteScalarHasParams(sSql, SqlParamSet);
return((result == "0" || result == "") ? false : true);
}
catch (SqlException sqlEx)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Check_ReaderId_FromReader_D]Sql Error:" + sqlEx.Message);
}
throw sqlEx;
}
catch (Exception ex)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Check_ReaderId_FromReader_D]Error:" + ex.Message);
}
throw ex;
}
finally
{
//operate_Reader_D = null;
Array.Resize(ref SqlParamSet, 0);
}
}
public void Handle(AbsClientRequestHandler absClientRequestHandler)
{
#region variable
byte[] receiveBuffer = null;
int readCount = 0;
string requestJsonStr = null;
string outputCmd = null;
EskmsKeyTxLogPOCO_v2 request = null;
EskmsKeyTxLogPOCO_v2 response = null;
string requestCheckErrMsg = null;
string responseJsonStr = null;
byte[] responseBytes = null;
int sendCount = -1;
AL_DBModule obDB = null;
Shipment shipment = null;
string txLogReturnCode = String.Empty;
#endregion
try
{
receiveBuffer = new byte[0x1000];//4k
readCount = absClientRequestHandler.ClientSocket.Receive(receiveBuffer, SocketFlags.None);
if (readCount == 0) { return; }
//command 輸出狀態 TODO...
else if (readCount == 6 && Encoding.UTF8.GetString(receiveBuffer, 0, readCount).ToLower().Contains("status"))
{
outputCmd = "Hello";
receiveBuffer = Encoding.UTF8.GetBytes(outputCmd);
absClientRequestHandler.ClientSocket.Send(receiveBuffer);
return;
}
else
{
log.Debug(m => m(">> {0}: {1}", this.GetType().Name, absClientRequestHandler.ClientNo));
//resize buffer
Array.Resize(ref receiveBuffer, readCount);
//init
obDB = new AL_DBModule();
shipment = new Shipment();
//casting jsonstring from buffer array
requestJsonStr = Encoding.UTF8.GetString(receiveBuffer);
log.Debug(m => m("[{0}]Request: {1}", this.GetType().Name, requestJsonStr));
request = JsonConvert.DeserializeObject<EskmsKeyTxLogPOCO_v2>(requestJsonStr);
//檢查Request資料長度(Attribute)
//request.CheckLength(true, out requestCheckErrMsg);
//回應資料設定
response = new EskmsKeyTxLogPOCO_v2()
{
SAM_UID = request.SAM_UID,
DeviceId = request.DeviceId,
ReturnCode = "000001",//預設為fail
};
txLogReturnCode = request.TestTxLog.Substring(16, 8);//取第16~23個字串
//簡易判斷:TxLog ReturnCode
if (txLogReturnCode.Equals("00000000"))
{
log.Debug(m => m("1.Open DB Connection"));
obDB.OpenConnection();
log.Debug(m => m("2.Run Shipment DB Operate SAM_UID:{0}, DeviceId:{1}", request.SAM_UID, request.DeviceId));
//若有輸入顧客識別符號和卡機種別則寫入時就依據此資料寫入,若無則使用預設値寫入(在DB_Operate.SQL.Sql_Getter_Reader_D裡)
if (!String.IsNullOrEmpty(request.Merc_Flg) && !String.IsNullOrEmpty(request.Reader_Type))
{
log.Debug(m => m("2-1. 自訂卡機格式與顧客識別[Reader_Type:{0}, Merc_Flg:{1}]", request.Reader_Type, request.Merc_Flg));
//執行Reader出貨的DB操作流程
shipment.Shipment_Reader(obDB, request.SAM_UID, request.DeviceId, request.Reader_Type, request.Merc_Flg);//
}
else
{
log.Debug(m => m("2-2.預設的卡機格式與顧客識別[Reader_Type:{0}, Merc_Flg:{1}]", "03", "ICA"));
//執行Reader出貨的DB操作流程
shipment.Shipment_Reader(obDB, request.SAM_UID, request.DeviceId);//
}
response.ReturnCode = "000000";
log.Debug(m => m("3.Shipment DB Operate End ..."));
}
else
{
log.Error(m => m("UID:{0} DeviceId:{1} TxLog ReturnCode異常:{2}",request.SAM_UID, request.DeviceId, txLogReturnCode));
}
responseJsonStr = JsonConvert.SerializeObject(response);
responseBytes = Encoding.UTF8.GetBytes(responseJsonStr);
log.Debug(m => m("[{0}] Response:{1}", this.GetType().Name, responseJsonStr));
sendCount = absClientRequestHandler.ClientSocket.Send(responseBytes);
if (sendCount != responseBytes.Length)
{
log.Error(m => m("異常:送出資料(length:{0}不等於原始資料(length:{1}))", sendCount, responseBytes.Length));
}
log.Debug(m => m("[{0}] Response End", this.GetType().Name));
}
}
catch (ArgumentOutOfRangeException ex)
{
log.Error(m => m("資料檢核失敗:{0}", ex.ToString()));
}
catch (JsonException ex)
{
log.Error(m => m("Request(JsonString) Parse Request(Object) Failed:{0}", ex.ToString()));
}
catch (Exception ex)
{
log.Error(m => m("[{0}] Error:{1} {2}", this.GetType().Name, ex.Message, ex.StackTrace));
}
finally
{
if (obDB != null && obDB.ALCon != null)
{
obDB.CloseConnection();
shipment = null;
}
absClientRequestHandler.ServiceState = new State_Exit();
}
}
public void RunBatch()
{
byte[] receiveBytes = null;
SocketClient.Domain.SocketClient bankAgent = null;
AutoloadRqt_2Bank requestToBank = null;
AutoloadRqt_2Bank responseFormBank = null;
//建立DB模組
AL_DBModule obDB = new AL_DBModule();
//交易log模組
LogModual logM = new LogModual();
try
{
//初始化DicBankAgents集合
this.InitBankAgentSetting();
//開啟連線
obDB.OpenConnection();
//--------------------------------------------------------------------------------------------
//從字典取出每個要傳批次的電文類型
foreach (BankAgent item in this.DicBankAgents.Keys)
{
log.Debug("開始檢查" + item.BankCode + "銀行的狀態與MQ存放的" + item.MessageType + "資料");
#region 1.當銀行狀態是連線的且MQ有傳資料(Ex:0120類型)回來(放在工作Queue)
while (this.DicBanks[item.BankCode].STATUS == "0" && this.DicBankAgents[item].synTopicSubscriber.Process())
{
if (this.waitForWork.Count == 0)
{
log.Error("待辦工作Queue[waitForWork]內無資料");
break;
}
DateTime dtrqt = DateTime.Now;
DateTime dtrsp = DateTime.Now;
string requestToBankJsonStr = this.waitForWork.Dequeue();//取得要傳送的字串
try
{
using (bankAgent = new SocketClient.Domain.SocketClient(item.IP, item.Port, item.SendTimeout, item.ReceiveTimeout))
{
if (bankAgent.ConnectToServer())
{
log.Debug("送到" + item.IP + ":" + item.Port + "的資料: " + requestToBankJsonStr);
byte[] sendJsonBytes = Encoding.UTF8.GetBytes(requestToBankJsonStr);
receiveBytes = bankAgent.SendAndReceive(sendJsonBytes);//送出資料並取得回應資料
if (receiveBytes == null)
{
log.Debug("接收資料為null,開始將資料加入異常Queue");
//要用Regex來比對嗎 Performance不知好不好//MESSAGE_TYPE:XXX0 --> XXX1
if (Regex.IsMatch(requestToBankJsonStr, "^{\"MESSAGE_TYPE\":\"[0-9]{3}0"))
{
string repeatRequest = Regex.Replace(requestToBankJsonStr, "^{\"MESSAGE_TYPE\":\"[0-9]{3}0",
delegate(Match match)
{
string result = match.Value.Substring(0, match.Value.Length - 1) + "1"; //xxx0 --> xxx1
return(result);
});
log.Debug("送出失敗: 修改MESSAGE_TYPE後的JSON =>" + repeatRequest);
//轉型回物件改MESSAGE_TYPE屬性內的值
//AutoloadRqt_2Bank tmp = JsonConvert.DeserializeObject<AutoloadRqt_2Bank>(requestToBankJsonStr);
//tmp.MESSAGE_TYPE = tmp.MESSAGE_TYPE.Substring(0, 3) + "1";//
//string sendFailRequest = JsonConvert.SerializeObject(tmp);
this.failed.Enqueue(repeatRequest);
}
else
{
//MESSAGE_TYPE:XXX1//格式已是重送的SPEC
this.failed.Enqueue(requestToBankJsonStr);//加入異常列表
}
continue;
}
}
}
}
catch (Exception ex)
{
log.Error("連線BankAgent異常:" + ex.StackTrace);
log.Error("連線異常,開始將資料加入異常Queue");
//只修改第一層message_type的data,第二層message_type的data不動(因為第二層為原始交易資訊)
string repeatRequest = Regex.Replace(requestToBankJsonStr, "^{\"MESSAGE_TYPE\":\"[0-9]{3}0",
delegate(Match match)
{
string result = match.Value.Substring(0, match.Value.Length - 1) + "1";
return(result);
});
log.Debug("[Exception]: 修改MESSAGE_TYPE後的JSON =>" + repeatRequest);
this.failed.Enqueue(repeatRequest);//加入異常列表
continue;
}
finally
{
//寫送出的Tans Log
//轉型
requestToBank = JsonConvert.DeserializeObject <AutoloadRqt_2Bank>(requestToBankJsonStr);
dtrsp = DateTime.Now;
//給銀行需要12碼,給DB紀錄只能8碼,故金額切掉多餘的碼(剩8碼)
requestToBank.AMOUNT = (requestToBank.AMOUNT.Length > 8) ? requestToBank.AMOUNT.Substring(requestToBank.AMOUNT.Length - 8, 8) : requestToBank.AMOUNT;
//記錄此次交易
log.Debug("[紀錄]給銀行的JSON:" + requestToBankJsonStr);
log.Debug("開始寫入Log傳給銀行的Request物件(類型:" + requestToBank.MESSAGE_TYPE + ")");
logM.SaveTransLog2Bank(requestToBank, obDB, dtrqt, dtrsp);
}
//回傳訊息不為空
if (receiveBytes != null)
{
try
{
//寫接收的Tans Log
//轉型
string responseFormBankJsonStr = Encoding.UTF8.GetString(receiveBytes);
responseFormBank = JsonConvert.DeserializeObject <AutoloadRqt_2Bank>(responseFormBankJsonStr);
//記錄此次交易
log.Debug("[紀錄]銀行回來的的JSON:" + responseFormBankJsonStr);
log.Debug("開始寫入Log銀行回傳的Response物件(類型:" + responseFormBank.MESSAGE_TYPE + ")");
//因為銀行回傳無Field 61,所以從給銀行的POCO取
responseFormBank.ICC_info = requestToBank.ICC_info;
//截掉銀行的代碼(DB只能3碼)-DB可以容許5碼_2015-04-28
//rspFromBank.BANK_CODE = rspFromBank.BANK_CODE.Substring((rspFromBank.BANK_CODE.Length - 3), 3);
//銀行回應的有12碼,給DB紀錄只能8碼,故金額切掉多餘的碼(剩8碼)
responseFormBank.AMOUNT = (responseFormBank.AMOUNT.Length > 8) ? responseFormBank.AMOUNT.Substring(responseFormBank.AMOUNT.Length - 8, 8) : responseFormBank.AMOUNT;
dtrsp = DateTime.Now;
logM.SaveTransLog2Bank(responseFormBank, obDB, dtrqt, dtrsp);
}
catch (Exception ex2)
{
logM.SaveErrorLog(obDB, this.GetType().Name + ex2.Message, "BatchAP");
log.Error("[BatchAP][RunBatch] Save Bank Trans Log Failed: " + ex2.StackTrace);
}
}
bankAgent = null;
}
#endregion
#region 2.將異常列表的資料塞回MQ
log.Debug("2.開始將異常列表的資料塞回MQ=>筆數:" + this.failed.Count);
this.DicBankAgents[item].topicPublisher.Start();
int count = 1;
while (this.failed.Count > 0)
{
//從異常Queue取出送到銀行端失敗的Json String
string backToMQJsonStr = this.failed.Dequeue();
log.Debug("開始發佈第 " + (count++) + " 筆發送失敗的POCO到MQ: " + backToMQJsonStr);
//發佈回MQ
this.DicBankAgents[item].topicPublisher.SendMessage <string>(backToMQJsonStr);
}
#endregion
#region 3.清空Queue
log.Debug("開始檢查並清空" + item.MessageType + "格式的暫存Queue");
if (this.waitForWork.Count > 0 || this.failed.Count > 0)
{
log.Debug("見鬼了...(類型:" + item.MessageType + ")Queue還有東西:\n waitForWork:" + this.waitForWork.Count + " \nfailed:" + this.failed.Count);
}
this.waitForWork.Clear();
this.failed.Clear();
#endregion
}
}
catch (Exception ex)
{
log.Error("[BatchAP][RunBatch] Error:" + ex.StackTrace);
}
finally
{
receiveBytes = null;
requestToBank = null;
responseFormBank = null;
obDB.CloseConnection();
}
}
public void Handle(AbsClientRequestHandler absClientRequestHandler)
{
#region variable
byte[] receiveBuffer = null;
int readCount = 0;
string requestJsonStr = null;
string outputCmd = null;
EskmsKeyTxLogPOCO_v2 request = null;
EskmsKeyTxLogPOCO_v2 response = null;
string requestCheckErrMsg = null;
string responseJsonStr = null;
byte[] responseBytes = null;
int sendCount = -1;
AL_DBModule obDB = null;
Shipment shipment = null;
string txLogReturnCode = String.Empty;
#endregion
try
{
receiveBuffer = new byte[0x1000];//4k
readCount = absClientRequestHandler.ClientSocket.Receive(receiveBuffer, SocketFlags.None);
if (readCount == 0)
{
return;
}
//command 輸出狀態 TODO...
else if (readCount == 6 && Encoding.UTF8.GetString(receiveBuffer, 0, readCount).ToLower().Contains("status"))
{
outputCmd = "Hello";
receiveBuffer = Encoding.UTF8.GetBytes(outputCmd);
absClientRequestHandler.ClientSocket.Send(receiveBuffer);
return;
}
else
{
log.Debug(m => m(">> {0}: {1}", this.GetType().Name, absClientRequestHandler.ClientNo));
//resize buffer
Array.Resize(ref receiveBuffer, readCount);
//init
obDB = new AL_DBModule();
shipment = new Shipment();
//casting jsonstring from buffer array
requestJsonStr = Encoding.UTF8.GetString(receiveBuffer);
log.Debug(m => m("[{0}]Request: {1}", this.GetType().Name, requestJsonStr));
request = JsonConvert.DeserializeObject <EskmsKeyTxLogPOCO_v2>(requestJsonStr);
//檢查Request資料長度(Attribute)
//request.CheckLength(true, out requestCheckErrMsg);
//回應資料設定
response = new EskmsKeyTxLogPOCO_v2()
{
SAM_UID = request.SAM_UID,
DeviceId = request.DeviceId,
ReturnCode = "000001",//預設為fail
};
txLogReturnCode = request.TestTxLog.Substring(16, 8);//取第16~23個字串
//簡易判斷:TxLog ReturnCode
if (txLogReturnCode.Equals("00000000"))
{
log.Debug(m => m("1.Open DB Connection"));
obDB.OpenConnection();
log.Debug(m => m("2.Run Shipment DB Operate SAM_UID:{0}, DeviceId:{1}", request.SAM_UID, request.DeviceId));
//若有輸入顧客識別符號和卡機種別則寫入時就依據此資料寫入,若無則使用預設値寫入(在DB_Operate.SQL.Sql_Getter_Reader_D裡)
if (!String.IsNullOrEmpty(request.Merc_Flg) && !String.IsNullOrEmpty(request.Reader_Type))
{
log.Debug(m => m("2-1. 自訂卡機格式與顧客識別[Reader_Type:{0}, Merc_Flg:{1}]", request.Reader_Type, request.Merc_Flg));
//執行Reader出貨的DB操作流程
shipment.Shipment_Reader(obDB, request.SAM_UID, request.DeviceId, request.Reader_Type, request.Merc_Flg);//
}
else
{
log.Debug(m => m("2-2.預設的卡機格式與顧客識別[Reader_Type:{0}, Merc_Flg:{1}]", "03", "ICA"));
//執行Reader出貨的DB操作流程
shipment.Shipment_Reader(obDB, request.SAM_UID, request.DeviceId);//
}
response.ReturnCode = "000000";
log.Debug(m => m("3.Shipment DB Operate End ..."));
}
else
{
log.Error(m => m("UID:{0} DeviceId:{1} TxLog ReturnCode異常:{2}", request.SAM_UID, request.DeviceId, txLogReturnCode));
}
responseJsonStr = JsonConvert.SerializeObject(response);
responseBytes = Encoding.UTF8.GetBytes(responseJsonStr);
log.Debug(m => m("[{0}] Response:{1}", this.GetType().Name, responseJsonStr));
sendCount = absClientRequestHandler.ClientSocket.Send(responseBytes);
if (sendCount != responseBytes.Length)
{
log.Error(m => m("異常:送出資料(length:{0}不等於原始資料(length:{1}))", sendCount, responseBytes.Length));
}
log.Debug(m => m("[{0}] Response End", this.GetType().Name));
}
}
catch (ArgumentOutOfRangeException ex)
{
log.Error(m => m("資料檢核失敗:{0}", ex.ToString()));
}
catch (JsonException ex)
{
log.Error(m => m("Request(JsonString) Parse Request(Object) Failed:{0}", ex.ToString()));
}
catch (Exception ex)
{
log.Error(m => m("[{0}] Error:{1} {2}", this.GetType().Name, ex.Message, ex.StackTrace));
}
finally
{
if (obDB != null && obDB.ALCon != null)
{
obDB.CloseConnection();
shipment = null;
}
absClientRequestHandler.ServiceState = new State_Exit();
}
}
public void Init()
{
this.shipment = new Shipment();
this.shipment.IsDebugWriteLine = true;
this.obDb = new AL_DBModule();
}
/// <summary>
///
/// </summary>
/// <param name="absClientRequestHandler"></param>
public void Handle(AbsClientRequestHandler absClientRequestHandler)
{
#region variable
byte[] receiveBuffer = null;
int readCount = 0;
string requestJsonStr = null;
string outputCmd = null;
IKMSGetter kmsGetter = null;
IList <EskmsKeyPOCO> request_list = null;
IList <EskmsKeyPOCO> response_list = null;
EskmsKeyPOCO response = null;
IList <string> UID_Failed_List;
Stopwatch timer;
//string requestCheckErrMsg = null;
string responseJsonStr = null;
string failed_list = null;
byte[] responseBytes = null;
byte[] diversKey = null;
int sendCount = -1;
AL_DBModule obDB = null;
Shipment shipment = null;
bool hasReaderId = false;
#endregion
try
{
receiveBuffer = new byte[0x4000];//4k
readCount = absClientRequestHandler.ClientSocket.Receive(receiveBuffer, SocketFlags.None);
if (readCount == 0)
{
return;
}
//command 輸出狀態 TODO...
else if (readCount == 6 && Encoding.UTF8.GetString(receiveBuffer, 0, readCount).ToLower().Contains("status"))
{
outputCmd = "Hello";
receiveBuffer = Encoding.UTF8.GetBytes(outputCmd);
absClientRequestHandler.ClientSocket.Send(receiveBuffer);
return;
}
else
{
log.Debug(m => m(">> {0}: {1}", this.GetType().Name, absClientRequestHandler.ClientNo));
//resize buffer
Array.Resize(ref receiveBuffer, readCount);
//init
obDB = new AL_DBModule();
shipment = new Shipment();
UID_Failed_List = new List <string>();
response_list = new List <EskmsKeyPOCO>();
timer = new Stopwatch();
timer.Start();
//casting jsonstring from buffer array
requestJsonStr = Encoding.UTF8.GetString(receiveBuffer);
log.Debug(m => m("[{0}]Request: {1}", this.GetType().Name, requestJsonStr));
request_list = JsonConvert.DeserializeObject <IList <EskmsKeyPOCO> >(requestJsonStr);
//檢查Request資料長度(Attribute) //不能檢查 因為沒有DeviceID
//poco.CheckLength(true, out requestCheckErrMsg);
log.Debug(m => m("1.Open DB Connection"));
obDB.OpenConnection();
log.Debug(m => m("2.Run DB Command"));
foreach (EskmsKeyPOCO request in request_list)
{
hasReaderId = shipment.Check_ReaderId_FromSAM_D(obDB, request.Input_UID, "21");
if (hasReaderId)
{
//設定Authenticate參數
kmsGetter = new KMSGetter()
{
Input_KeyLabel = request.Input_KeyLabel,
Input_KeyVersion = request.Input_KeyVersion,
Input_UID = request.Input_UID,
Input_DeviceID = request.Input_DeviceID
};
log.Debug(m => m("3.開始取Divers Key"));
diversKey = kmsGetter.GetDiversKey();//會傳送數據到KMS並取回DiverseKey後做運算並將結果寫入Output屬性中
if (diversKey == null)
{
UID_Failed_List.Add(request.Input_UID);
}
else
{
//回應資料設定
response = new EskmsKeyPOCO()
{
Input_KeyLabel = request.Input_KeyLabel,
Input_KeyVersion = request.Input_KeyVersion,
Input_UID = request.Input_UID,
Output_DiversKey = diversKey
};
response_list.Add(response);
}
}
else
{
UID_Failed_List.Add(request.Input_UID);
}
}
if (UID_Failed_List.Count > 0)
{
failed_list = JsonConvert.SerializeObject(UID_Failed_List);
log.Debug(m => m("[{0}] 取Key失敗的UID列表:{1}", this.GetType().Name, failed_list));
}
responseJsonStr = JsonConvert.SerializeObject(response_list);
responseBytes = Encoding.UTF8.GetBytes(responseJsonStr);
log.Debug(m => m("[{0}] Response:{1}", this.GetType().Name, responseJsonStr));
sendCount = absClientRequestHandler.ClientSocket.Send(responseBytes);
if (sendCount != responseBytes.Length)
{
log.Error(m => m("異常:送出資料(length:{0}不等於原始資料(length:{1}))", sendCount, responseBytes.Length));
}
timer.Stop();
log.Debug(m => m("[{0}] Response End TimeSpend:{1}ms", this.GetType().Name, timer.ElapsedMilliseconds));
}
}
catch (ArgumentOutOfRangeException ex)
{
log.Error(m => m("資料檢核失敗:{0}", ex.ToString()));
}
catch (System.Data.SqlClient.SqlException sqlEx)
{
log.Error(m => m("DB Operate Failed:{0}", sqlEx.ToString()));
}
catch (JsonException ex)
{
log.Error(m => m("Request(JsonString) Parse Request(Object) Failed:{0}", ex.ToString()));
}
catch (Exception ex)
{
log.Error(m => m("[{0}] Error:{1} {2}", this.GetType().Name, ex.Message, ex.StackTrace));
}
finally
{
if (obDB != null)
{
obDB.CloseConnection();
shipment = null;
}
absClientRequestHandler.ServiceState = new State_Exit();
}
}
/// <summary>
/// Reader出貨流程 -2016-02-23
/// 1.檢查ReaderId是否存在於Reader主檔
/// 2.更新或新增數據至Reader主檔(需自行設定顧客識別符號與卡機種別)
/// 3.根據原來的SAM UID將SAM表格資料備份到SAMDIFF
/// 4.刪除SAM表格原來UID的數據
/// 5.重新新增此UID的資料到SAM表格
/// </summary>
/// <param name="obDB">DB模組</param>
/// <param name="uid">SAM UID(OSN)14 hex string</param>
/// <param name="deviceId">卡機DeviceId:32 hex string</param>
/// <param name="reader_type">卡機種別, 00:沒卡機、01:NEC R6 卡機、02:MPG/CRF 卡機、03:CASTLES/V5s 卡機</param>
/// <param name="merc_flg">顧客識別符號, ex:"SET"</param>
public void Shipment_Reader(AL_DBModule obDB, string uid, string deviceId, string reader_type, string merc_flg)
{
string readerId = (Sql_Getter_Reader_D.Reader_Head + uid);//'86' + osn
bool flag = false;
//1.檢查ReaderId是否存在於Reader主檔
if (this.Check_ReaderId_FromReader_D(obDB, readerId))
{
//更新Reader主檔
flag = this.Update_FromReader_D(obDB, uid, deviceId, reader_type, merc_flg);
}
else
{
//新增Reader主檔
flag = this.Insert_FromReader_D(obDB, uid, deviceId, reader_type, merc_flg);
}
if (flag)
{
TransactionOptions option = new TransactionOptions();
option.IsolationLevel = System.Transactions.IsolationLevel.RepeatableRead;
option.Timeout = new TimeSpan(0, 0, 10);//10sec
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required, option))
{
//1.依據UID將SAM_D表格資料備份到SAMDIFF_D表格
this.Copy_SAM_D_To_SAMDIFF(obDB, uid);
//2.依據UID刪除SAM_D資料
this.Delete_SAM_D(obDB, uid);
//3.依據UID新增一筆資料到SAM_D
this.Insert_SAM_D(obDB, uid);
scope.Complete();
}
}
}
/// <summary>
/// 依據卡機ReaderId檢查是否存在於Reader主檔
/// </summary>
/// <param name="obDB">DB連線模組</param>
/// <param name="readerId">卡機ReaderId(14 hex string)</param>
/// <returns>true:存在/false:不存在</returns>
protected bool Check_ReaderId_FromReader_D(AL_DBModule obDB, string readerId)
{
try
{
//判斷資料庫連線有無開啟
if (obDB != null && obDB.ALCon.State != ConnectionState.Open)
{
obDB.ALCon.Open();
}
}
catch (SqlException ex)
{
Debug.WriteLine(ex);
throw ex;
}
catch (Exception ex)
{
throw ex;
}
//Sql_Getter_Reader_D operate_Reader_D = new Sql_Getter_Reader_D();//產生sql指令
SqlParameter[] SqlParamSet = null;
String sSql; //查詢SQL
try
{
//檢查ReaderId('86' + uid)是否存在於SAM主檔
//operate_Reader_D.Exist_ReaderId(readerId, out sSql, out SqlParamSet);
this.Operate_Reader_D.Exist_ReaderId(readerId, out sSql, out SqlParamSet);
string result = obDB.SqlExecuteScalarHasParams(sSql, SqlParamSet);
return (result == "0" || result == "") ? false : true;
}
catch (SqlException sqlEx)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Check_ReaderId_FromReader_D]Sql Error:" + sqlEx.Message);
}
throw sqlEx;
}
catch (Exception ex)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Check_ReaderId_FromReader_D]Error:" + ex.Message);
}
throw ex;
}
finally
{
//operate_Reader_D = null;
Array.Resize(ref SqlParamSet, 0);
}
}
/// <summary>
/// 依據uid來新增一筆資料到SAM_D表格
/// </summary>
/// <param name="obDB">DB模組</param>
/// <param name="uid">SAM UID(OSN)7 bytes</param>
protected void Insert_SAM_D(AL_DBModule obDB, string uid)
{
try
{
//判斷資料庫連線有無開啟
if (obDB != null && obDB.ALCon.State != ConnectionState.Open)
{
obDB.ALCon.Open();
}
}
catch (SqlException ex)
{
Debug.WriteLine(ex);
throw ex;
}
catch (Exception ex)
{
throw ex;
}
//Sql_Getter_SAM_D operate_SAM_D = new Sql_Getter_SAM_D();//產生sql指令
SqlParameter[] SqlParamSet = null;
String sSql; //查詢SQL
try
{
//依據uid(osn)將SAM主檔的Row data刪除
//operate_SAM_D.Insert(uid, out sSql, out SqlParamSet);
this.Operate_SAM_D.Insert(uid, out sSql, out SqlParamSet);
string result = obDB.SqlExec1(sSql, SqlParamSet);
if (IsDebugWriteLine)
{
Debug.WriteLine("Result:" + ((result == "1") ? "Success" : "NoneChange"));
}
//return (result == "1") ? true : false;
}
catch (SqlException sqlEx)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Insert_SAM_D]Sql Error:" + sqlEx.Message);
}
throw sqlEx;
}
catch (Exception ex)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Insert_SAM_D]Error:" + ex.Message);
}
throw ex;
}
finally
{
//operate_SAM_D = null;
Array.Resize(ref SqlParamSet, 0);
}
}
/// <summary>
/// 依據ReaderId 更新Reader主檔(需有顧客識別符號與reader_type, null=>default value)
/// 資料物件必須有資料的欄位(READER_ID,READER_TYPE,READER_STS,TERMINAL_PSN,SAM_ID,SH_DATE,UPT_DATE,UPT_TIME,READER_ID)
/// 取得更新Reader主檔的SQL參數和命令
/// </summary>
/// <param name="obDB">DB連線模組</param>
/// <param name="uid">SAM uid(14 hex string)</param>
/// <param name="deviceId">deviceId(16 bytes)</param>
/// <param name="reader_type">卡機種別, 00:沒卡機、01:NEC R6 卡機、02:MPG/CRF 卡機、03:CASTLES/V5s 卡機</param>
/// <param name="merc_flg">顧客識別符號, ex:"SET"</param>
/// <returns>true:更新成功/false:更新後數據無變動</returns>
protected bool Update_FromReader_D(AL_DBModule obDB, string uid, string deviceId, string reader_type, string merc_flg)
{
try
{
//判斷資料庫連線有無開啟
if (obDB != null && obDB.ALCon.State != ConnectionState.Open)
{
obDB.ALCon.Open();
}
}
catch (SqlException ex)
{
Debug.WriteLine(ex);
throw ex;
}
catch (Exception ex)
{
throw ex;
}
//Sql_Getter_Reader_D operate_Reader_D = new Sql_Getter_Reader_D();//產生sql指令
SqlParameter[] SqlParamSet = null;
String sSql; //查詢SQL
try
{
//依據ReaderId('86' + uid)更新Reader主檔
this.Operate_Reader_D.Update(uid, deviceId, out sSql, out SqlParamSet, reader_type, merc_flg);
string result = obDB.SqlExec1(sSql, SqlParamSet);
//if (IsDebugWriteLine)
//{
// Debug.WriteLine("Result:" + ((result == "1") ? "Success" : "NoneChange"));
//}
return (result == "1") ? true : false;
}
catch (SqlException sqlEx)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Update_FromReader_D]Sql Error:" + sqlEx.Message);
}
throw sqlEx;
}
catch (Exception ex)
{
if (IsDebugWriteLine)
{
Debug.WriteLine("[Shipment][Update_FromReader_D]Error:" + ex.Message);
}
throw ex;
}
finally
{
//operate_Reader_D = null;
Array.Resize(ref SqlParamSet, 0);
}
}
public void Init()
{
this.shipment = new Shipment();
this.shipment.IsDebugWriteLine = true;
this.obDb = new AL_DBModule();
}
/// <summary>
///
/// </summary>
/// <param name="absClientRequestHandler"></param>
public void Handle(AbsClientRequestHandler absClientRequestHandler)
{
#region variable
byte[] receiveBuffer = null;
int readCount = 0;
string requestJsonStr = null;
string outputCmd = null;
IKMSGetter kmsGetter = null;
IList<EskmsKeyPOCO> request_list = null;
IList<EskmsKeyPOCO> response_list = null;
EskmsKeyPOCO response = null;
IList<string> UID_Failed_List;
Stopwatch timer;
//string requestCheckErrMsg = null;
string responseJsonStr = null;
string failed_list = null;
byte[] responseBytes = null;
byte[] diversKey = null;
int sendCount = -1;
AL_DBModule obDB = null;
Shipment shipment = null;
bool hasReaderId = false;
#endregion
try
{
receiveBuffer = new byte[0x4000];//4k
readCount = absClientRequestHandler.ClientSocket.Receive(receiveBuffer, SocketFlags.None);
if (readCount == 0) { return; }
//command 輸出狀態 TODO...
else if (readCount == 6 && Encoding.UTF8.GetString(receiveBuffer, 0, readCount).ToLower().Contains("status"))
{
outputCmd = "Hello";
receiveBuffer = Encoding.UTF8.GetBytes(outputCmd);
absClientRequestHandler.ClientSocket.Send(receiveBuffer);
return;
}
else
{
log.Debug(m => m(">> {0}: {1}", this.GetType().Name, absClientRequestHandler.ClientNo));
//resize buffer
Array.Resize(ref receiveBuffer, readCount);
//init
obDB = new AL_DBModule();
shipment = new Shipment();
UID_Failed_List = new List<string>();
response_list = new List<EskmsKeyPOCO>();
timer = new Stopwatch();
timer.Start();
//casting jsonstring from buffer array
requestJsonStr = Encoding.UTF8.GetString(receiveBuffer);
log.Debug(m => m("[{0}]Request: {1}", this.GetType().Name, requestJsonStr));
request_list = JsonConvert.DeserializeObject<IList<EskmsKeyPOCO>>(requestJsonStr);
//檢查Request資料長度(Attribute) //不能檢查 因為沒有DeviceID
//poco.CheckLength(true, out requestCheckErrMsg);
log.Debug(m => m("1.Open DB Connection"));
obDB.OpenConnection();
log.Debug(m => m("2.Run DB Command"));
foreach (EskmsKeyPOCO request in request_list)
{
hasReaderId = shipment.Check_ReaderId_FromSAM_D(obDB, request.Input_UID, "21");
if (hasReaderId)
{
//設定Authenticate參數
kmsGetter = new KMSGetter()
{
Input_KeyLabel = request.Input_KeyLabel,
Input_KeyVersion = request.Input_KeyVersion,
Input_UID = request.Input_UID,
Input_DeviceID = request.Input_DeviceID
};
log.Debug(m => m("3.開始取Divers Key"));
diversKey = kmsGetter.GetDiversKey();//會傳送數據到KMS並取回DiverseKey後做運算並將結果寫入Output屬性中
if (diversKey == null)
{
UID_Failed_List.Add(request.Input_UID);
}
else
{
//回應資料設定
response = new EskmsKeyPOCO()
{
Input_KeyLabel = request.Input_KeyLabel,
Input_KeyVersion = request.Input_KeyVersion,
Input_UID = request.Input_UID,
Output_DiversKey = diversKey
};
response_list.Add(response);
}
}
else
{
UID_Failed_List.Add(request.Input_UID);
}
}
if (UID_Failed_List.Count > 0)
{
failed_list = JsonConvert.SerializeObject(UID_Failed_List);
log.Debug(m => m("[{0}] 取Key失敗的UID列表:{1}", this.GetType().Name, failed_list));
}
responseJsonStr = JsonConvert.SerializeObject(response_list);
responseBytes = Encoding.UTF8.GetBytes(responseJsonStr);
log.Debug(m => m("[{0}] Response:{1}", this.GetType().Name, responseJsonStr));
sendCount = absClientRequestHandler.ClientSocket.Send(responseBytes);
if (sendCount != responseBytes.Length)
{
log.Error(m => m("異常:送出資料(length:{0}不等於原始資料(length:{1}))", sendCount, responseBytes.Length));
}
timer.Stop();
log.Debug(m => m("[{0}] Response End TimeSpend:{1}ms", this.GetType().Name, timer.ElapsedMilliseconds));
}
}
catch (ArgumentOutOfRangeException ex)
{
log.Error(m => m("資料檢核失敗:{0}", ex.ToString()));
}
catch (System.Data.SqlClient.SqlException sqlEx)
{
log.Error(m => m("DB Operate Failed:{0}", sqlEx.ToString()));
}
catch (JsonException ex)
{
log.Error(m => m("Request(JsonString) Parse Request(Object) Failed:{0}", ex.ToString()));
}
catch (Exception ex)
{
log.Error(m => m("[{0}] Error:{1} {2}", this.GetType().Name, ex.Message, ex.StackTrace));
}
finally
{
if (obDB != null)
{
obDB.CloseConnection();
shipment = null;
}
absClientRequestHandler.ServiceState = new State_Exit();
}
}
