private void ShowActions(long customID)
{
ALS.BLL.actions bllact = new ALS.BLL.actions();
DataSet dsact = bllact.GetList("customID='" + customID + "'", true);
this.dgActions.DataSource = dsact.Tables[0];
this.dgActions.Columns[0].Visible = this.dgActions.Columns[1].Visible = false;
this.dgActions.Refresh();
}
private void btnVeinOpen_Click(object sender, EventArgs e)
{
ALS.Model.actions modact = new ALS.Model.actions();
ALS.BLL.actions bllact = new ALS.BLL.actions();
Button b = sender as Button;
if (b.Tag != null)
{
switch (b.Tag.ToString())
{
case "1":
modact.arrCommand = Cls.Comm_Main.LiquidLevel.liquidLevel1Up;
modact.actionInfo = "静脉壶液面上升";
break;
case "2":
modact.arrCommand = Cls.Comm_Main.LiquidLevel.liquidLevel1Down;
modact.actionInfo = "静脉壶液面下降";
break;
case "3":
modact.arrCommand = Cls.Comm_Main.LiquidLevel.liquidLevel2Up;
modact.actionInfo = "动脉壶液面上升";
break;
case "4":
modact.arrCommand = Cls.Comm_Main.LiquidLevel.liquidLevel2Down;
modact.actionInfo = "动脉壶液面下降";
break;
case "5":
modact.arrCommand = Cls.Comm_Main.LiquidLevel.liquidLevel3Up;
modact.actionInfo = "M1液面上升";
break;
case "6":
modact.arrCommand = Cls.Comm_Main.LiquidLevel.liquidLevel3Down;
modact.actionInfo = "M1液面下降";
break;
}
}
modact.customID = m_customID;
modact.portName = Port_Main.PortName;
modact.cmdLength = modact.arrCommand.Length;
if (bllact.Add(modact))
{
ShowActions(m_customID);
}
}
private void btnVoiseClose_Click(object sender, EventArgs e)
{
ALS.Model.actions modact = new ALS.Model.actions();
ALS.BLL.actions bllact = new ALS.BLL.actions();
Button b = sender as Button;
switch (b.Tag.ToString())
{
case "voise1":
modact.arrCommand = Cls.Comm_Main.CmdAlarmLamp.Alarm1;
modact.actionInfo = "报警音1";
break;
case "voise2":
modact.arrCommand = Cls.Comm_Main.CmdAlarmLamp.Alarm2;
modact.actionInfo = "报警音2";
break;
case "lightclose":
modact.arrCommand = Cls.Comm_Main.CmdAlarmLamp.AllLightClose;
modact.actionInfo = "所有灯关闭";
break;
case "lightred":
modact.arrCommand = Cls.Comm_Main.CmdAlarmLamp.RedTwinkle;
modact.actionInfo = "红灯闪烁";
break;
case "lightyellow":
modact.arrCommand = Cls.Comm_Main.CmdAlarmLamp.YellowTwinkle;
modact.actionInfo = "黄灯闪烁";
break;
case "lightgreen":
modact.arrCommand = Cls.Comm_Main.CmdAlarmLamp.GreenAlways;
modact.actionInfo = "绿灯常亮";
break;
}
modact.customID = m_customID;
modact.portName = Port_Main.PortName;
modact.cmdLength = modact.arrCommand.Length;
if (bllact.Add(modact))
{
ShowActions(m_customID);
}
}
public bool GetCustCmd(string method)
{
ShowCustomActions(method);
ALS.BLL.customactions bllCust = new ALS.BLL.customactions();
m_lstCust = bllCust.GetModelList("methodName='" + method + "'");
if (m_lstCust.Count > 0)
{
m_queueCustSendCmd = new Queue <Cls.Model_CustomCMD>();
ALS.BLL.actions bllact = new ALS.BLL.actions();
for (int i = 0; i < m_lstCust.Count; i++)
{
//重新计算时间点
if (i > 0)
{
m_lstCust[i].timeCount = m_lstCust[i - 1].timeCount + m_lstCust[i - 1].timeSpan;
}
//读取步骤下相应的动作列表
int customID = (int)m_lstCust[i].ID;
List <ALS.Model.actions> lstModAct = bllact.GetModelList("customID='" + customID + "'");
List <Cls.Model_SendCMD> lstActions = new List <Cls.Model_SendCMD>();
if (lstModAct.Count > 0)
{
lstActions = GetlstActions(lstModAct);
}
Cls.Model_CustomCMD modCustCmd = new Cls.Model_CustomCMD();
modCustCmd._TimesCount = (int)m_lstCust[i].timeCount;
modCustCmd._LstSendCMDs = lstActions;
modCustCmd._LastTime = (int)m_lstCust[i].timeSpan;
modCustCmd._ActionName = m_lstCust[i].actionName;
modCustCmd._Index = m_queueCustSendCmd.Count;
//将该动作列表加入步骤里
m_queueCustSendCmd.Enqueue(modCustCmd);
}
//最后一项提取总时间
int timefull = (int)(m_lstCust[m_lstCust.Count - 1].timeCount + m_lstCust[m_lstCust.Count - 1].timeSpan);// (int)modCust.timeCount + (int)modCust.timeSpan;
this.lblFullTime.Text = Cls.utils.SecondsToTime(timefull);
return(true);
}
else
{
this.lblFullTime.Text = "00:00:00";
return(false);
}
}
private void btnDelAction1_Click(object sender, EventArgs e)
{
if (m_ActionID != -1)
{
ALS.BLL.actions bllact = new ALS.BLL.actions();
//获取该步骤信息
if (DialogResult.Yes == MessageBox.Show("确认删除该动作?", "警告", MessageBoxButtons.YesNo, MessageBoxIcon.Question))
{
if (bllact.Delete(m_ActionID))
{
ShowActions(m_customID);
}
m_ActionID = -1;
}
}
else
{
MessageBox.Show("请选择要删除的动作", "警告", MessageBoxButtons.OK, MessageBoxIcon.Warning);
}
}
private void rbtnAddActionOfAD_Click(object sender, EventArgs e)
{
if (m_ADID == 0)
{
MessageBox.Show("请选择气泡检测器");
return;
}
if (!(this.rbtnOpenAD.Checked) && !(this.rbtnCloseAD.Checked))
{
MessageBox.Show("请选择气泡检测器状态");
return;
}
ALS.Model.actions modact = new ALS.Model.actions();
ALS.BLL.actions bllact = new ALS.BLL.actions();
switch (m_ADID)
{
case 1:
if (rbtnOpenAD.Checked)
{
modact.arrCommand = Cls.Comm_Main.CmdBubble.OpenBubble1;
modact.actionInfo = "气泡检测器1打开";
}
else
{
modact.arrCommand = Cls.Comm_Main.CmdBubble.CloseBubble1;
modact.actionInfo = "气泡检测器1关闭";
}
break;
case 2:
if (rbtnOpenAD.Checked)
{
modact.arrCommand = Cls.Comm_Main.CmdBubble.OpenBubble2;
modact.actionInfo = "气泡检测器2打开";
}
else
{
modact.arrCommand = Cls.Comm_Main.CmdBubble.CloseBubble2;
modact.actionInfo = "气泡检测器2关闭";
}
break;
case 3:
if (rbtnOpenAD.Checked)
{
modact.arrCommand = Cls.Comm_Main.CmdBubble.OpenBubble3;
modact.actionInfo = "气泡检测器3打开";
}
else
{
modact.arrCommand = Cls.Comm_Main.CmdBubble.CloseBubble3;
modact.actionInfo = "气泡检测器3关闭";
}
break;
}
modact.customID = m_customID;
modact.portName = Port_Main.PortName;
modact.cmdLength = modact.arrCommand.Length;
if (bllact.Add(modact))
{
ShowActions(m_customID);
}
}
private void btnAddActionOfV_Click(object sender, EventArgs e)
{
byte[] vstate = new byte[6];
StringBuilder sb = new StringBuilder();
ALS.Model.actions modact = new ALS.Model.actions();
ALS.BLL.actions bllact = new ALS.BLL.actions();
if (chkV1.Checked)
{
sb.Append("V1夹管,"); vstate[0] = 0x01;
}
else
{
sb.Append("V1松管,"); vstate[0] = 0x00;
}
if (chkV2.Checked)
{
sb.Append("V2夹管,"); vstate[1] = 0x01;
}
else
{
sb.Append("V2松管,"); vstate[1] = 0x00;
}
if (chkV3.Checked)
{
sb.Append("V3夹管,"); vstate[2] = 0x01;
}
else
{
sb.Append("V3松管,"); vstate[2] = 0x00;
}
if (chkV4.Checked)
{
sb.Append("V4夹管,"); vstate[3] = 0x01;
}
else
{
sb.Append("V4松管,"); vstate[3] = 0x00;
}
if (chkV5.Checked)
{
sb.Append("V5夹管,"); vstate[4] = 0x01;
}
else
{
sb.Append("V5松管,"); vstate[4] = 0x00;
}
if (chkV6.Checked)
{
sb.Append("V6夹管."); vstate[5] = 0x01;
}
else
{
sb.Append("V6松管."); vstate[5] = 0x00;
}
string info = sb.ToString();
if (DialogResult.OK == MessageBox.Show("请确认夹管阀状态是否正确:[" + info + "] ?", "提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Question))
{
modact.actionInfo = info;
modact.customID = m_customID;
modact.portName = Port_Main.PortName;
modact.arrCommand = Cls.Comm_Main.CmdValve.SetVState(vstate[0], vstate[1], vstate[2], vstate[3], vstate[4], vstate[5]);
modact.cmdLength = modact.arrCommand.Length;
if (bllact.Add(modact))
{
ShowActions(m_customID);
}
}
}
private void btnAddActionOfPump_Click(object sender, EventArgs e)
{
if (m_pumpID == 0)
{
MessageBox.Show("请选择泵!");
return;
}
if ((!rbtnClockwise.Checked) && (!rbtnAntiClockwise.Checked) && (!rbtnIsRun.Checked))
{
MessageBox.Show("请选择泵运转方向!");
return;
}
//当选择所有泵时，必须选择rbtnIsRun
if (rbtnAllPump.Checked)
{
if (rbtnIsRun.Checked == false)
{
MessageBox.Show("请选择所有泵的运转状态,此处必须选择停止!");
return;
}
}
//if (lblPumpSpeed.Text == "0.0" && (!rbtnIsRun.Checked))
//{
// MessageBox.Show("请设定泵速!");
// return;
//}
if (m_modc != null)
{
//当前选择的自定义步骤
m_customID = (int)m_modc.ID;
//添加泵动作
//针对创新模式中，预计 预冲量的确认需要计算：
//第一部分：预冲量 以自定义步骤中 BP运转时间 * 速度；
//第二部分：预冲量 以自定义步骤中 RP运转时间 * 速度；
//当添加的动作里包含 BP 或 RP 运转时，需要更新该步骤中的累计流量字段；
//注：原有字段 timeCount ,存储 累计流量
ALS.Model.actions modact = new ALS.Model.actions();
modact.customID = m_customID;
m_bPumpDirection = rbtnClockwise.Checked ? true : false;
m_bPumpRun = rbtnIsRun.Checked ? false : true;
modact.arrCommand = Cls.Comm_PeristalticPump.Command(m_pumpID, Convert.ToDouble(this.lblPumpSpeed.Text), m_bPumpRun, m_bPumpDirection);
modact.portName = _port_Pump.PortName;
modact.cmdLength = modact.arrCommand.Length;
if (m_bPumpRun)
{
modact.actionInfo = m_strPumpText + "," + m_strPumpDirection + "," + lblPumpSpeed.Text + "mL/min,持续时间:" + lbltsPump.Text + ",预计流量:" + lblml.Text + "mL";
}
else
{
modact.actionInfo = m_strPumpText + ",停止运行!";
}
ALS.BLL.actions bllact = new ALS.BLL.actions();
if (bllact.Add(modact))
{
////如果泵ID为1
//if(m_pumpID==1)
//{
// m_modc.timeCount = int.Parse(lblml.Text);
// new BLL.customactions().Update(m_modc);
//}
DataSet dsact = bllact.GetList("customID='" + m_customID + "'", true);
this.dgActions.DataSource = dsact.Tables[0];
this.dgActions.Refresh();
}
}
else
{
MessageBox.Show("请选择需要添加操作的步骤", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return;
}
}
private void btnAddActionOfV_Click(object sender, EventArgs e)
{
if (m_VID == 0)
{
MessageBox.Show("请选择夹管阀");
return;
}
if (!(rbtnClampV.Checked) && !(rbtnLooseV.Checked))
{
MessageBox.Show("请选择夹管阀动作状态");
return;
}
ALS.Model.actions modact = new ALS.Model.actions();
ALS.BLL.actions bllact = new ALS.BLL.actions();
switch (m_VID)
{
case 1:
if (rbtnClampV.Checked)
{
modact.arrCommand = Cls.Comm_Main.CmdValve.ClampV1;
modact.actionInfo = "夹管阀1夹管";
}
else
{
modact.arrCommand = Cls.Comm_Main.CmdValve.LoosenV1;
modact.actionInfo = "夹管阀1松管";
}
break;
case 2:
if (rbtnClampV.Checked)
{
modact.arrCommand = Cls.Comm_Main.CmdValve.ClampV2;
modact.actionInfo = "夹管阀2夹管";
}
else
{
modact.arrCommand = Cls.Comm_Main.CmdValve.LoosenV2;
modact.actionInfo = "夹管阀2松管";
}
break;
case 3:
if (rbtnClampV.Checked)
{
modact.arrCommand = Cls.Comm_Main.CmdValve.ClampV3;
modact.actionInfo = "夹管阀3夹管";
}
else
{
modact.arrCommand = Cls.Comm_Main.CmdValve.LoosenV3;
modact.actionInfo = "夹管阀3松管";
}
break;
case 4:
if (rbtnClampV.Checked)
{
modact.arrCommand = Cls.Comm_Main.CmdValve.ClampV4;
modact.actionInfo = "夹管阀4夹管";
}
else
{
modact.arrCommand = Cls.Comm_Main.CmdValve.LoosenV4;
modact.actionInfo = "夹管阀4松管";
}
break;
case 5:
if (rbtnClampV.Checked)
{
modact.arrCommand = Cls.Comm_Main.CmdValve.ClampV5;
modact.actionInfo = "夹管阀5夹管";
}
else
{
modact.arrCommand = Cls.Comm_Main.CmdValve.LoosenV5;
modact.actionInfo = "夹管阀5松管";
}
break;
case 6:
if (rbtnClampV.Checked)
{
modact.arrCommand = Cls.Comm_Main.CmdValve.ClampV6;
modact.actionInfo = "夹管阀6夹管";
}
else
{
modact.arrCommand = Cls.Comm_Main.CmdValve.LoosenV6;
modact.actionInfo = "夹管阀6松管";
}
break;
}
modact.customID = m_customID;
modact.portName = Port_Main.PortName;
modact.cmdLength = modact.arrCommand.Length;
if (bllact.Add(modact))
{
ShowActions(m_customID);
}
}
private void btnAddActionOfPump_Click(object sender, EventArgs e)
{
if (m_pumpID == 0)
{
MessageBox.Show("请选择泵!");
return;
}
if ((!rbtnClockwise.Checked) && (!rbtnAntiClockwise.Checked) && (!rbtnIsRun.Checked))
{
MessageBox.Show("请选择泵运转方向!");
return;
}
//当选择所有泵时，必须选择rbtnIsRun
if (rbtnAllPump.Checked)
{
if (rbtnIsRun.Checked == false)
{
MessageBox.Show("请选择所有泵的运转状态,此处必须选择停止!");
return;
}
}
if (lblPumpSpeed.Text == "0.0" && (!rbtnIsRun.Checked))
{
MessageBox.Show("请设定泵速!");
return;
}
if (m_modc != null)
{
m_customID = (int)m_modc.ID;
ALS.Model.actions modact = new ALS.Model.actions();
modact.customID = m_customID;
m_bPumpDirection = rbtnClockwise.Checked ? true : false;
m_bPumpRun = rbtnIsRun.Checked ? false : true;
modact.arrCommand = Cls.Comm_PeristalticPump.Command(m_pumpID, Convert.ToDouble(this.lblPumpSpeed.Text), m_bPumpRun, m_bPumpDirection);
modact.portName = _port_Pump.PortName;
modact.cmdLength = modact.arrCommand.Length;
if (m_bPumpRun)
{
modact.actionInfo = m_strPumpText + "," + m_strPumpDirection + "," + lblPumpSpeed.Text + "mL/min,持续时间:" + lbltsPump.Text + ",预计流量:" + lblml.Text + "mL";
}
else
{
modact.actionInfo = m_strPumpText + ",停止运行!";
}
ALS.BLL.actions bllact = new ALS.BLL.actions();
if (bllact.Add(modact))
{
DataSet dsact = bllact.GetList("customID='" + m_customID + "'", true);
this.dgActions.DataSource = dsact.Tables[0];
this.dgActions.Refresh();
}
}
else
{
MessageBox.Show("请选择需要添加操作的步骤", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return;
}
}