| public readBits ( int numBits ) : int | ||
| numBits | int | number of bits to read /// |
| Résultat | int | |
private static int parseECIValue(BitSource bits)
{
int firstByte = bits.readBits(8);
if ((firstByte & 0x80) == 0)
{
// just one byte
return firstByte & 0x7F;
}
else if ((firstByte & 0xC0) == 0x80)
{
// two bytes
int secondByte = bits.readBits(8);
return ((firstByte & 0x3F) << 8) | secondByte;
}
else if ((firstByte & 0xE0) == 0xC0)
{
// three bytes
int secondThirdBytes = bits.readBits(16);
return ((firstByte & 0x1F) << 16) | secondThirdBytes;
}
throw new ArgumentException("Bad ECI bits starting with byte " + firstByte);
}
internal static DecoderResult decode(sbyte[] bytes, Version version, ErrorCorrectionLevel ecLevel)
{
var bits = new BitSource(bytes);
var result = new StringBuilder(50);
CharacterSetECI currentCharacterSetECI = null;
bool fc1InEffect = false;
var byteSegments = new List<byte[]>(1);
Mode mode;
do
{
// While still another segment to read...
if (bits.available() < 4)
{
// OK, assume we're done. Really, a TERMINATOR mode should have been recorded here
mode = Mode.TERMINATOR;
}
else
{
try
{
mode = Mode.forBits(bits.readBits(4)); // mode is encoded by 4 bits
}
catch (ArgumentException)
{
throw ReaderException.Instance;
}
}
if (!mode.Equals(Mode.TERMINATOR))
{
if (mode.Equals(Mode.FNC1_FIRST_POSITION) || mode.Equals(Mode.FNC1_SECOND_POSITION))
{
// We do little with FNC1 except alter the parsed result a bit according to the spec
fc1InEffect = true;
}
else if (mode.Equals(Mode.STRUCTURED_APPEND))
{
// not really supported; all we do is ignore it
// Read next 8 bits (symbol sequence #) and 8 bits (parity data), then continue
bits.readBits(16);
}
else if (mode.Equals(Mode.ECI))
{
// Count doesn't apply to ECI
int value_Renamed = parseECIValue(bits);
currentCharacterSetECI = CharacterSetECI.getCharacterSetECIByValue(value_Renamed);
if (currentCharacterSetECI == null)
{
throw ReaderException.Instance;
}
}
else
{
// How many characters will follow, encoded in this mode?
int count = bits.readBits(mode.getCharacterCountBits(version));
if (mode.Equals(Mode.NUMERIC))
{
decodeNumericSegment(bits, result, count);
}
else if (mode.Equals(Mode.ALPHANUMERIC))
{
decodeAlphanumericSegment(bits, result, count, fc1InEffect);
}
else if (mode.Equals(Mode.BYTE))
{
decodeByteSegment(bits, result, count, currentCharacterSetECI, byteSegments);
}
else if (mode.Equals(Mode.KANJI))
{
decodeKanjiSegment(bits, result, count);
}
else
{
throw ReaderException.Instance;
}
}
}
} while (!mode.Equals(Mode.TERMINATOR));
return new DecoderResult(bytes, result.ToString(), (byteSegments.Count == 0) ? null : byteSegments, ecLevel);
}
private static void decodeAlphanumericSegment(BitSource bits, StringBuilder result, int count, bool fc1InEffect)
{
// Read two characters at a time
int start = result.Length;
while (count > 1)
{
int nextTwoCharsBits = bits.readBits(11);
result.Append(ALPHANUMERIC_CHARS[nextTwoCharsBits/45]);
result.Append(ALPHANUMERIC_CHARS[nextTwoCharsBits%45]);
count -= 2;
}
if (count == 1)
{
// special case: one character left
result.Append(ALPHANUMERIC_CHARS[bits.readBits(6)]);
}
// See section 6.4.8.1, 6.4.8.2
if (fc1InEffect)
{
// We need to massage the result a bit if in an FNC1 mode:
for (int i = start; i < result.Length; i++)
{
if (result[i] == '%')
{
if (i < result.Length - 1 && result[i + 1] == '%')
{
// %% is rendered as %
result.Remove(i + 1, 1);
}
else
{
// In alpha mode, % should be converted to FNC1 separator 0x1D
result[i] = (char) 0x1D;
}
}
}
}
}
private static void decodeNumericSegment(BitSource bits, StringBuilder result, int count)
{
// Read three digits at a time
while (count >= 3)
{
// Each 10 bits encodes three digits
int threeDigitsBits = bits.readBits(10);
if (threeDigitsBits >= 1000)
{
throw ReaderException.Instance;
}
result.Append(ALPHANUMERIC_CHARS[threeDigitsBits/100]);
result.Append(ALPHANUMERIC_CHARS[(threeDigitsBits/10)%10]);
result.Append(ALPHANUMERIC_CHARS[threeDigitsBits%10]);
count -= 3;
}
if (count == 2)
{
// Two digits left over to read, encoded in 7 bits
int twoDigitsBits = bits.readBits(7);
if (twoDigitsBits >= 100)
{
throw ReaderException.Instance;
}
result.Append(ALPHANUMERIC_CHARS[twoDigitsBits/10]);
result.Append(ALPHANUMERIC_CHARS[twoDigitsBits%10]);
}
else if (count == 1)
{
// One digit left over to read
int digitBits = bits.readBits(4);
if (digitBits >= 10)
{
throw ReaderException.Instance;
}
result.Append(ALPHANUMERIC_CHARS[digitBits]);
}
}
private static void decodeKanjiSegment(BitSource bits, StringBuilder result, int count)
{
// Each character will require 2 bytes. Read the characters as 2-byte pairs
// and decode as Shift_JIS afterwards
var buffer = new sbyte[2*count];
int offset = 0;
while (count > 0)
{
// Each 13 bits encodes a 2-byte character
int twoBytes = bits.readBits(13);
int assembledTwoBytes = ((twoBytes/0x0C0) << 8) | (twoBytes%0x0C0);
if (assembledTwoBytes < 0x01F00)
{
// In the 0x8140 to 0x9FFC range
assembledTwoBytes += 0x08140;
}
else
{
// In the 0xE040 to 0xEBBF range
assembledTwoBytes += 0x0C140;
}
buffer[offset] = (sbyte) (assembledTwoBytes >> 8);
buffer[offset + 1] = (sbyte) assembledTwoBytes;
offset += 2;
count--;
}
// Shift_JIS may not be supported in some environments:
try
{
byte[] byteArray = SupportClass.ToByteArray(buffer);
result.Append(Encoding.GetEncoding(SHIFT_JIS).GetString(byteArray, 0, byteArray.Length));
}
catch (IOException)
{
throw ReaderException.Instance;
}
}
private static void decodeByteSegment(BitSource bits, StringBuilder result, int count,
CharacterSetECI currentCharacterSetECI, List<byte[]> byteSegments)
{
var readBytes = new sbyte[count];
if (count << 3 > bits.available())
{
throw ReaderException.Instance;
}
for (int i = 0; i < count; i++)
{
readBytes[i] = (sbyte) bits.readBits(8);
}
String encoding;
if (currentCharacterSetECI == null)
{
// The spec isn't clear on this mode; see
// section 6.4.5: t does not say which encoding to assuming
// upon decoding. I have seen ISO-8859-1 used as well as
// Shift_JIS -- without anything like an ECI designator to
// give a hint.
encoding = guessEncoding(readBytes);
}
else
{
encoding = currentCharacterSetECI.EncodingName;
}
try
{
byte[] byteArray = SupportClass.ToByteArray(readBytes);
result.Append(Encoding.GetEncoding(encoding).GetString(byteArray, 0, byteArray.Length));
}
catch (IOException)
{
throw ReaderException.Instance;
}
byteSegments.Add(SupportClass.ToByteArray(readBytes));
}
/// <summary> See ISO 16022:2006, 5.2.9 and Annex B, B.2</summary>
private static void decodeBase256Segment(BitSource bits, StringBuilder result, List<byte[]> byteSegments)
{
// Figure out how long the Base 256 Segment is.
int d1 = bits.readBits(8);
int count;
if (d1 == 0)
{
// Read the remainder of the symbol
count = bits.available()/8;
}
else if (d1 < 250)
{
count = d1;
}
else
{
count = 250*(d1 - 249) + bits.readBits(8);
}
var bytes = new sbyte[count];
for (int i = 0; i < count; i++)
{
bytes[i] = unrandomize255State(bits.readBits(8), i);
}
byteSegments.Add(SupportClass.ToByteArray(bytes));
try
{
var byteArray = SupportClass.ToByteArray(bytes);
result.Append(Encoding.GetEncoding("ISO8859_1").GetString(byteArray, 0, byteArray.Length));
}
catch (IOException uee)
{
throw new SystemException("Platform does not support required encoding: " + uee);
}
}
/// <summary> See ISO 16022:2006, 5.2.8 and Annex C Table C.3</summary>
private static void decodeEdifactSegment(BitSource bits, StringBuilder result)
{
bool unlatch = false;
do
{
// If there is only two or less bytes left then it will be encoded as ASCII
if (bits.available() <= 16)
{
return;
}
for (int i = 0; i < 4; i++)
{
int edifactValue = bits.readBits(6);
// Check for the unlatch character
if (edifactValue == 0x2B67)
{
// 011111
unlatch = true;
// If we encounter the unlatch code then continue reading because the Codeword triple
// is padded with 0's
}
if (!unlatch)
{
if ((edifactValue & 32) == 0)
{
// no 1 in the leading (6th) bit
edifactValue |= 64; // Add a leading 01 to the 6 bit binary value
}
result.Append(edifactValue);
}
}
} while (!unlatch && bits.available() > 0);
}
/// <summary> See ISO 16022:2006, 5.2.7</summary>
private static void decodeAnsiX12Segment(BitSource bits, StringBuilder result)
{
// Three ANSI X12 values are encoded in a 16-bit value as
// (1600 * C1) + (40 * C2) + C3 + 1
var cValues = new int[3];
do
{
// If there is only one byte left then it will be encoded as ASCII
if (bits.available() == 8)
{
return;
}
int firstByte = bits.readBits(8);
if (firstByte == 254)
{
// Unlatch codeword
return;
}
parseTwoBytes(firstByte, bits.readBits(8), cValues);
for (int i = 0; i < 3; i++)
{
int cValue = cValues[i];
if (cValue == 0)
{
// X12 segment terminator <CR>
result.Append('\r');
}
else if (cValue == 1)
{
// X12 segment separator *
result.Append('*');
}
else if (cValue == 2)
{
// X12 sub-element separator >
result.Append('>');
}
else if (cValue == 3)
{
// space
result.Append(' ');
}
else if (cValue < 14)
{
// 0 - 9
result.Append((char) (cValue + 44));
}
else if (cValue < 40)
{
// A - Z
result.Append((char) (cValue + 51));
}
else
{
throw ReaderException.Instance;
}
}
} while (bits.available() > 0);
}
/// <summary> See ISO 16022:2006, 5.2.6 and Annex C, Table C.2</summary>
private static void decodeTextSegment(BitSource bits, StringBuilder result)
{
// Three Text values are encoded in a 16-bit value as
// (1600 * C1) + (40 * C2) + C3 + 1
// TODO(bbrown): The Upper Shift with Text doesn't work in the 4 value scenario all the time
bool upperShift = false;
var cValues = new int[3];
do
{
// If there is only one byte left then it will be encoded as ASCII
if (bits.available() == 8)
{
return;
}
int firstByte = bits.readBits(8);
if (firstByte == 254)
{
// Unlatch codeword
return;
}
parseTwoBytes(firstByte, bits.readBits(8), cValues);
int shift = 0;
for (int i = 0; i < 3; i++)
{
int cValue = cValues[i];
switch (shift)
{
case 0:
if (cValue < 3)
{
shift = cValue + 1;
}
else
{
if (upperShift)
{
result.Append((char) (TEXT_BASIC_SET_CHARS[cValue] + 128));
upperShift = false;
}
else
{
result.Append(TEXT_BASIC_SET_CHARS[cValue]);
}
}
break;
case 1:
if (upperShift)
{
result.Append((char) (cValue + 128));
upperShift = false;
}
else
{
result.Append(cValue);
}
shift = 0;
break;
case 2:
// Shift 2 for Text is the same encoding as C40
if (cValue < 27)
{
if (upperShift)
{
result.Append((char) (C40_SHIFT2_SET_CHARS[cValue] + 128));
upperShift = false;
}
else
{
result.Append(C40_SHIFT2_SET_CHARS[cValue]);
}
}
else if (cValue == 27)
{
// FNC1
throw ReaderException.Instance;
}
else if (cValue == 30)
{
// Upper Shift
upperShift = true;
}
else
{
throw ReaderException.Instance;
}
shift = 0;
break;
case 3:
if (upperShift)
{
result.Append((char) (TEXT_SHIFT3_SET_CHARS[cValue] + 128));
upperShift = false;
}
else
{
result.Append(TEXT_SHIFT3_SET_CHARS[cValue]);
}
shift = 0;
break;
default:
throw ReaderException.Instance;
}
}
} while (bits.available() > 0);
}
/// <summary> See ISO 16022:2006, 5.2.3 and Annex C, Table C.2</summary>
private static int decodeAsciiSegment(BitSource bits, StringBuilder result, StringBuilder resultTrailer)
{
bool upperShift = false;
do
{
int oneByte = bits.readBits(8);
if (oneByte == 0)
{
throw ReaderException.Instance;
}
else if (oneByte <= 128)
{
// ASCII data (ASCII value + 1)
oneByte = upperShift ? (oneByte + 128) : oneByte;
upperShift = false;
result.Append((char) (oneByte - 1));
return ASCII_ENCODE;
}
else if (oneByte == 129)
{
// Pad
return PAD_ENCODE;
}
else if (oneByte <= 229)
{
// 2-digit data 00-99 (Numeric Value + 130)
int value_Renamed = oneByte - 130;
if (value_Renamed < 10)
{
// padd with '0' for single digit values
result.Append('0');
}
result.Append(value_Renamed);
}
else if (oneByte == 230)
{
// Latch to C40 encodation
return C40_ENCODE;
}
else if (oneByte == 231)
{
// Latch to Base 256 encodation
return BASE256_ENCODE;
}
else if (oneByte == 232)
{
// FNC1
//throw ReaderException.getInstance();
// Ignore this symbol for now
}
else if (oneByte == 233)
{
// Structured Append
//throw ReaderException.getInstance();
// Ignore this symbol for now
}
else if (oneByte == 234)
{
// Reader Programming
//throw ReaderException.getInstance();
// Ignore this symbol for now
}
else if (oneByte == 235)
{
// Upper Shift (shift to Extended ASCII)
upperShift = true;
}
else if (oneByte == 236)
{
// 05 Macro
result.Append("[)>\u001E05\u001D");
resultTrailer.Insert(0, "\u001E\u0004");
}
else if (oneByte == 237)
{
// 06 Macro
result.Append("[)>\u001E06\u001D");
resultTrailer.Insert(0, "\u001E\u0004");
}
else if (oneByte == 238)
{
// Latch to ANSI X12 encodation
return ANSIX12_ENCODE;
}
else if (oneByte == 239)
{
// Latch to Text encodation
return TEXT_ENCODE;
}
else if (oneByte == 240)
{
// Latch to EDIFACT encodation
return EDIFACT_ENCODE;
}
else if (oneByte == 241)
{
// ECI Character
// TODO(bbrown): I think we need to support ECI
//throw ReaderException.getInstance();
// Ignore this symbol for now
}
else if (oneByte >= 242)
{
// Not to be used in ASCII encodation
throw ReaderException.Instance;
}
} while (bits.available() > 0);
return ASCII_ENCODE;
}