/// <summary>
/// Initializes a new instance of the NAStationModule class.
/// </summary>
/// <param name="type">Included in every device or module. It defines
/// the type of the device/module. Its values are among :
/// NAMain : for the base station
/// NAModule1 : for the outdoor module
/// NAModule4 : for the additionnal indoor module
/// NAModule3 : for the rain gauge module
/// NAPlug : for the thermostat relay/plug
/// NATherm1 : for the thermostat module
/// </param>
/// <param name="dashboardData">It contains all the measurements that
/// can be displayed on the dashboard</param>
/// <param name="batteryVp">It contains the current battery status. The
/// threshold depends on the kind of module, below is the list of the
/// different threshold to take into account according the module type.
/// "Indoor module Battery range: 6000 ... 4200" |
/// INDOOR_BATTERY_LEVEL_FULL = 5640
/// INDOOR_BATTERY_LEVEL_HIGH = 5280
/// INDOOR_BATTERY_LEVEL_MEDIUM = 4920
/// INDOOR_BATTERY_LEVEL_LOW = 4560
/// "Below 4560: very low" |
///
/// "Raingauge and outdoor module Battery range: 6000 ... 3600" |
/// BATTERY_LEVEL_FULL = 5500
/// BATTERY_LEVEL_HIGH = 5000
/// BATTERY_LEVEL_MEDIUM = 4500
/// BATTERY_LEVEL_LOW = 4000
/// "Below 4000: very low" |
///
/// "Thermostat Battery range: 4500 ... 3000" |
/// THERMOSTAT_BATTERY_LEVEL_FULL = 4100
/// THERMOSTAT_BATTERY_LEVEL_HIGH = 3600
/// THERMOSTAT_BATTERY_LEVEL_MEDIUM = 3300
/// THERMOSTAT_BATTERY_LEVEL_LOW = 3000
/// "Below 3000: very low"
/// </param>
/// <param name="batteryPercent">It contains the current battery level
/// in percentage.</param>
/// <param name="rfStatus">"It contains the current radio status. The
/// different thresholds to take into account are :" |
/// RADIO_THRESHOLD_SIGNAL_LOW = 90
/// RADIO_THRESHOLD_SIGNAL_MEDIUM = 80
/// RADIO_THRESHOLD_SIGNAL_HIGH = 70
/// RADIO_THRESHOLD_SIGNAL_FULL = 60
/// </param>
public NAStationModule(string _id = default(string), string type = default(string), int?lastMessage = default(int?), int?lastSeen = default(int?), NADashboardData dashboardData = default(NADashboardData), IList <string> dataType = default(IList <string>), string moduleName = default(string), int?lastSetup = default(int?), int?batteryVp = default(int?), int?batteryPercent = default(int?), int?rfStatus = default(int?), int?firmware = default(int?))
{
this._id = _id;
Type = type;
LastMessage = lastMessage;
LastSeen = lastSeen;
DashboardData = dashboardData;
DataType = dataType;
ModuleName = moduleName;
LastSetup = lastSetup;
BatteryVp = batteryVp;
BatteryPercent = batteryPercent;
RfStatus = rfStatus;
Firmware = firmware;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the NAHealthyHomeCoach class.
/// </summary>
/// <param name="type">Included in every device or module. It defines
/// the type of the device/module. Its values are among :
/// NHC: Healthy Home Coach
/// </param>
/// <param name="dashboardData">It contains all the measurements that
/// can be displayed on the dashboard</param>
/// <param name="wifiStatus">It contains the current wifi status. The
/// different thresholds to take into account are
/// RSSI_THRESHOLD_0 = 86 bad signal
/// RSSI_THRESHOLD_1 = 71 middle quality signal
/// RSSI_THRESHOLD_2 = 56 good signal
/// </param>
public NAHealthyHomeCoach(string _id = default(string), string cipherId = default(string), int?lastStatusStore = default(int?), NAPlace place = default(NAPlace), string type = default(string), NADashboardData dashboardData = default(NADashboardData), IList <string> dataType = default(IList <string>), bool?co2Calibrating = default(bool?), int?dateSetup = default(int?), int?lastSetup = default(int?), int?firmware = default(int?), int?lastUpgrade = default(int?), int?wifiStatus = default(int?), string name = default(string))
{
this._id = _id;
CipherId = cipherId;
LastStatusStore = lastStatusStore;
Place = place;
Type = type;
DashboardData = dashboardData;
DataType = dataType;
Co2Calibrating = co2Calibrating;
DateSetup = dateSetup;
LastSetup = lastSetup;
Firmware = firmware;
LastUpgrade = lastUpgrade;
WifiStatus = wifiStatus;
Name = name;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the NAModule class.
/// </summary>
/// <param name="type">Included in every device or module. It defines
/// the type of the device/module. Its values are among :
/// NAMain : for the base station
/// NAModule1 : for the outdoor module
/// NAModule4 : for the additionnal indoor module
/// NAModule3 : for the rain gauge module
/// NAPlug : for the thermostat relay/plug
/// NATherm1 : for the thermostat module
/// </param>
/// <param name="rfStatus">"It contains the current radio status. The
/// different thresholds to take into account are :" |
/// RADIO_THRESHOLD_SIGNAL_LOW = 90
/// RADIO_THRESHOLD_SIGNAL_MEDIUM = 80
/// RADIO_THRESHOLD_SIGNAL_HIGH = 70
/// RADIO_THRESHOLD_SIGNAL_FULL = 60
/// </param>
/// <param name="batteryVp">It contains the current battery status. The
/// threshold depends on the kind of module, below is the list of the
/// different threshold to take into account according the module type.
/// "Indoor module Battery range: 6000 ... 4200" |
/// INDOOR_BATTERY_LEVEL_FULL = 5640
/// INDOOR_BATTERY_LEVEL_HIGH = 5280
/// INDOOR_BATTERY_LEVEL_MEDIUM = 4920
/// INDOOR_BATTERY_LEVEL_LOW = 4560
/// "Below 4560: very low" |
///
/// "Raingauge and outdoor module Battery range: 6000 ... 3600" |
/// BATTERY_LEVEL_FULL = 5500
/// BATTERY_LEVEL_HIGH = 5000
/// BATTERY_LEVEL_MEDIUM = 4500
/// BATTERY_LEVEL_LOW = 4000
/// "Below 4000: very low" |
///
/// "Thermostat Battery range: 4500 ... 3000" |
/// THERMOSTAT_BATTERY_LEVEL_FULL = 4100
/// THERMOSTAT_BATTERY_LEVEL_HIGH = 3600
/// THERMOSTAT_BATTERY_LEVEL_MEDIUM = 3300
/// THERMOSTAT_BATTERY_LEVEL_LOW = 3000
/// "Below 3000: very low"
/// </param>
/// <param name="dashboardData">It contains all the measurements that
/// can be displayed on the dashboard</param>
public NAModule(string _id = default(string), NADate dateSetup = default(NADate), int?firmware = default(int?), string type = default(string), string moduleName = default(string), string mainDevice = default(string), int?lastMessage = default(int?), int?lastSeen = default(int?), bool?publicExtData = default(bool?), int?rfStatus = default(int?), int?batteryVp = default(int?), int?thermOrientation = default(int?), int?thermRelayCmd = default(int?), NADashboardData dashboardData = default(NADashboardData), IList <string> dataType = default(IList <string>))
{
this._id = _id;
DateSetup = dateSetup;
Firmware = firmware;
Type = type;
ModuleName = moduleName;
MainDevice = mainDevice;
LastMessage = lastMessage;
LastSeen = lastSeen;
PublicExtData = publicExtData;
RfStatus = rfStatus;
BatteryVp = batteryVp;
ThermOrientation = thermOrientation;
ThermRelayCmd = thermRelayCmd;
DashboardData = dashboardData;
DataType = dataType;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the NAMain class.
/// </summary>
/// <param name="type">Included in every device or module. It defines
/// the type of the device/module. Its values are among :
/// NAMain : for the base station
/// NAModule1 : for the outdoor module
/// NAModule4 : for the additionnal indoor module
/// NAModule3 : for the rain gauge module
/// NAPlug : for the thermostat relay/plug
/// NATherm1 : for the thermostat module
/// </param>
/// <param name="dashboardData">It contains all the measurements that
/// can be displayed on the dashboard</param>
/// <param name="wifiStatus">It contains the current wifi status. The
/// different thresholds to take into account are
/// RSSI_THRESHOLD_0 = 86 bad signal
/// RSSI_THRESHOLD_1 = 71 middle quality signal
/// RSSI_THRESHOLD_2 = 56 good signal
/// </param>
public NAMain(string _id = default(string), string cipherId = default(string), int?lastStatusStore = default(int?), IList <NAStationModule> modules = default(IList <NAStationModule>), NAPlace place = default(NAPlace), string stationName = default(string), string type = default(string), NADashboardData dashboardData = default(NADashboardData), IList <string> dataType = default(IList <string>), bool?co2Calibrating = default(bool?), int?dateSetup = default(int?), int?lastSetup = default(int?), string moduleName = default(string), int?firmware = default(int?), int?lastUpgrade = default(int?), int?wifiStatus = default(int?))
{
this._id = _id;
CipherId = cipherId;
LastStatusStore = lastStatusStore;
Modules = modules;
Place = place;
StationName = stationName;
Type = type;
DashboardData = dashboardData;
DataType = dataType;
Co2Calibrating = co2Calibrating;
DateSetup = dateSetup;
LastSetup = lastSetup;
ModuleName = moduleName;
Firmware = firmware;
LastUpgrade = lastUpgrade;
WifiStatus = wifiStatus;
CustomInit();
}
/// <summary>
/// Initializes a new instance of the NADevice class.
/// </summary>
/// <param name="modules">It lists which modules are linked with this
/// device</param>
/// <param name="type">Included in every device or module. It defines
/// the type of the device/module. Its values are among :
/// NAMain : for the base station
/// NAModule1 : for the outdoor module
/// NAModule4 : for the additionnal indoor module
/// NAModule3 : for the rain gauge module
/// NAPlug : for the thermostat relay/plug
/// NATherm1 : for the thermostat module
/// </param>
/// <param name="wifiStatus">It contains the current wifi status. The
/// different thresholds to take into account are
/// RSSI_THRESHOLD_0 = 86 bad signal
/// RSSI_THRESHOLD_1 = 71 middle quality signal
/// RSSI_THRESHOLD_2 = 56 good signal
/// </param>
/// <param name="dashboardData">It contains all the measurements that
/// can be displayed on the dashboard</param>
public NADevice(string _id = default(string), int?behavior = default(int?), string cipherId = default(string), NADate dateSetup = default(NADate), int?firmware = default(int?), int?hwVersion = default(int?), NAHeatingSystem heatingSystem = default(NAHeatingSystem), NAHouseModel houseModel = default(NAHouseModel), string ip = default(string), int?lastFwUpdate = default(int?), int?lastRadioStore = default(int?), int?lastStatusStore = default(int?), int?lastUpgrade = default(int?), string moduleName = default(string), IList <string> modules = default(IList <string>), NAPlace place = default(NAPlace), object setpoint = default(object), int?setpointDefaultDuration = default(int?), IDictionary <string, IList <NAObject> > setpointOrder = default(IDictionary <string, IList <NAObject> >), bool?publicExtData = default(bool?), string stationName = default(string), IDictionary <string, NAThermProgram> thermProgram = default(IDictionary <string, NAThermProgram>), IDictionary <string, IList <NAThermProgram> > thermProgramBackup = default(IDictionary <string, IList <NAThermProgram> >), IDictionary <string, IList <NAObject> > thermProgramOrder = default(IDictionary <string, IList <NAObject> >), string type = default(string), IList <string> userOwner = default(IList <string>), bool?udpConn = default(bool?), int?wifiStatus = default(int?), bool?newFeatureAvail = default(bool?), bool?firstPidAvail = default(bool?), NADashboardData dashboardData = default(NADashboardData), IList <string> dataType = default(IList <string>))
{
this._id = _id;
Behavior = behavior;
CipherId = cipherId;
DateSetup = dateSetup;
Firmware = firmware;
HwVersion = hwVersion;
HeatingSystem = heatingSystem;
HouseModel = houseModel;
Ip = ip;
LastFwUpdate = lastFwUpdate;
LastRadioStore = lastRadioStore;
LastStatusStore = lastStatusStore;
LastUpgrade = lastUpgrade;
ModuleName = moduleName;
Modules = modules;
Place = place;
Setpoint = setpoint;
SetpointDefaultDuration = setpointDefaultDuration;
SetpointOrder = setpointOrder;
PublicExtData = publicExtData;
StationName = stationName;
ThermProgram = thermProgram;
ThermProgramBackup = thermProgramBackup;
ThermProgramOrder = thermProgramOrder;
Type = type;
UserOwner = userOwner;
UdpConn = udpConn;
WifiStatus = wifiStatus;
NewFeatureAvail = newFeatureAvail;
FirstPidAvail = firstPidAvail;
DashboardData = dashboardData;
DataType = dataType;
CustomInit();
}