private void ApplyFeatureTemplates()
{
// Get a reference to the selected FeatureTemplate
IEditor3 templateEditor = ArcMap.Editor as IEditor3;
IEditTemplate theCurrentTemplate = templateEditor.CurrentTemplate;
// If they didn't select a template, they'll need to
if (theCurrentTemplate == null) { MessageBox.Show("No FeatureTemplate was selected.", "NCGMP Tools"); return; }
// Find out what FeatureClass the selected template belongs to, and what its geometry is
IFeatureClass templateFC = ((IFeatureLayer)theCurrentTemplate.Layer).FeatureClass;
switch (templateFC.ShapeType)
{
case esriGeometryType.esriGeometryPolyline:
// Look for feature selected in line FeatureClasses
#region ContactsAndFaults
IFeatureLayer contactsAndFaultsFL = commonFunctions.FindFeatureLayer(m_theWorkspace, "ContactsAndFaults");
if (contactsAndFaultsFL != null)
{
// Found ContactsAndFaults. Check for a selection
IFeatureSelection selectedFeatures = contactsAndFaultsFL as IFeatureSelection;
if (selectedFeatures.SelectionSet.Count > 0)
{
// ContactsAndFaults were selected. Pass the selection into a cursor.
ISelectionSet featureSelectionSet = selectedFeatures.SelectionSet;
ICursor theCursor;
featureSelectionSet.Search(null, false, out theCursor);
IFeatureCursor theFeatureCursor = (IFeatureCursor)theCursor;
// Some variables to declare before the loops
int idFld = theFeatureCursor.FindField("ContactsAndFaults_ID");
IFeature theFeature;
string thisId;
// Construct a dummy feature to get attributes from
IFeature dummyFeature = templateFC.CreateFeature();
theCurrentTemplate.SetDefaultValues(dummyFeature);
string ExistenceConfidence = dummyFeature.get_Value(templateFC.FindField("ExistenceConfidence")).ToString();
string IdentityConfidence = dummyFeature.get_Value(templateFC.FindField("IdentityConfidence")).ToString();
string Symbol = dummyFeature.get_Value(templateFC.FindField("Symbol")).ToString();
string Label = dummyFeature.get_Value(templateFC.FindField("Label")).ToString();
double LocationConfidenceMeters;
bool result = double.TryParse(dummyFeature.get_Value(templateFC.FindField("LocationConfidenceMeters")).ToString(), out LocationConfidenceMeters);
string Notes = dummyFeature.get_Value(templateFC.FindField("Notes")).ToString();
string RuleID = dummyFeature.get_Value(templateFC.FindField("RuleID")).ToString();
string Type = dummyFeature.get_Value(templateFC.FindField("Type")).ToString();
int IsConcealed = 0;
if (contactsAndFaultsFL.FeatureClass.Equals(templateFC) == true)
{
result = int.TryParse(dummyFeature.get_Value(templateFC.FindField("IsConcealed")).ToString(), out IsConcealed);
}
// Destroy the dummy feature - must happen within an edit operation
ArcMap.Editor.StartOperation();
dummyFeature.Delete();
ArcMap.Editor.StopOperation("Remove Dummy Feature");
//Is the FeatureTemplate also for ContactsAndFaults?
switch (contactsAndFaultsFL.FeatureClass.Equals(templateFC))
{
case true:
// Update the features to the FeatureTemplate
ContactsAndFaultsAccess ContactsAndFaultsUpdater = new ContactsAndFaultsAccess(m_theWorkspace);
theFeature = theFeatureCursor.NextFeature();
while (theFeature != null)
{
// Find the ContactsAndFaults feature to update
thisId = theFeature.get_Value(idFld).ToString();
ContactsAndFaultsUpdater.AddContactsAndFaults("ContactsAndFaults_ID = '" + thisId + "'");
ContactsAndFaultsAccess.ContactsAndFault thisContactsAndFault = ContactsAndFaultsUpdater.ContactsAndFaultsDictionary[thisId];
// Assign values from the FeatureTemplate
thisContactsAndFault.ExistenceConfidence = ExistenceConfidence;
thisContactsAndFault.IdentityConfidence = IdentityConfidence;
thisContactsAndFault.Symbol = Symbol;
thisContactsAndFault.Label = Label;
thisContactsAndFault.LocationConfidenceMeters = LocationConfidenceMeters;
thisContactsAndFault.Notes = Notes;
thisContactsAndFault.RuleID = RuleID;
thisContactsAndFault.Type = Type;
thisContactsAndFault.IsConcealed = IsConcealed;
// Update the feature
ContactsAndFaultsUpdater.UpdateContactsAndFault(thisContactsAndFault);
// Increment the cursor
theFeature = theFeatureCursor.NextFeature();
}
// Save changes
ContactsAndFaultsUpdater.SaveContactsAndFaults();
break;
case false:
// Copy the features into the templateFC using the selected template as a guide
// Build DataAccess Classes for target FeatureClasses
GeologicLinesAccess GeologicLinesInserter = new GeologicLinesAccess(m_theWorkspace);
// Find the target FeatureClass Name
string tableName = (templateFC as IDataset).Name;
// Parse the table name in order to strip out unneccessary bits of SDE tables
ISQLSyntax nameParser = (ISQLSyntax)m_theWorkspace;
string parsedDbName, parsedOwnerName, parsedTableName;
nameParser.ParseTableName(tableName, out parsedDbName, out parsedOwnerName, out parsedTableName);
// Will need to remove the selected feature from ContactsAndFaults
ContactsAndFaultsAccess ContactsAndFaultsRemover = new ContactsAndFaultsAccess(m_theWorkspace);
// Loop through the selected ContactsAndFaults
theFeature = theFeatureCursor.NextFeature();
while (theFeature != null)
{
// Find the ContactsAndFaults feature to remove
thisId = theFeature.get_Value(idFld).ToString();
ContactsAndFaultsRemover.AddContactsAndFaults("ContactsAndFaults_ID = '" + thisId + "'");
ContactsAndFaultsAccess.ContactsAndFault thisContactsAndFault = ContactsAndFaultsRemover.ContactsAndFaultsDictionary[thisId];
// Setup attributes
string DataSourceID = thisContactsAndFault.DataSourceID;
IPolyline Shape = thisContactsAndFault.Shape;
// Create the new feature in the template FeatureClass
switch (parsedTableName)
{
case "GeologicLines":
// Insert the new GeologicLines
GeologicLinesInserter.NewGeologicLine(Type, LocationConfidenceMeters, ExistenceConfidence, IdentityConfidence, Symbol, Label, Notes, DataSourceID, RuleID, Shape);
GeologicLinesInserter.SaveGeologicLines();
// Clear out the dictionary so lines don't get added more than once.
GeologicLinesInserter.ClearGeologicLines();
// Delete the old one
ContactsAndFaultsRemover.DeleteContactsAndFaults(thisContactsAndFault);
break;
default:
// This would happen if there's some other polyline featuretemplate selected. Just need to exit gracefully.
break;
}
// Increment the cursor
theFeature = theFeatureCursor.NextFeature();
}
break;
}
}
}
#endregion
#region GeologicLines
IFeatureLayer GeologicLinesFL = commonFunctions.FindFeatureLayer(m_theWorkspace, "GeologicLines");
if (GeologicLinesFL != null)
{
// Found GeologicLines. Check for a selection
IFeatureSelection selectedFeatures = GeologicLinesFL as IFeatureSelection;
if (selectedFeatures.SelectionSet.Count > 0)
{
// GeologicLines were selected. Pass the selection into a cursor.
ISelectionSet featureSelectionSet = selectedFeatures.SelectionSet;
ICursor theCursor;
featureSelectionSet.Search(null, false, out theCursor);
IFeatureCursor theFeatureCursor = (IFeatureCursor)theCursor;
// Some variables to declare before the loops
int idFld = theFeatureCursor.FindField("GeologicLines_ID");
IFeature theFeature;
string thisId;
// Construct a dummy feature to get attributes from
IFeature dummyFeature = templateFC.CreateFeature();
theCurrentTemplate.SetDefaultValues(dummyFeature);
string ExistenceConfidence = dummyFeature.get_Value(templateFC.FindField("ExistenceConfidence")).ToString();
string IdentityConfidence = dummyFeature.get_Value(templateFC.FindField("IdentityConfidence")).ToString();
string Symbol = dummyFeature.get_Value(templateFC.FindField("Symbol")).ToString();
string Label = dummyFeature.get_Value(templateFC.FindField("Label")).ToString();
double LocationConfidenceMeters;
bool result = double.TryParse(dummyFeature.get_Value(templateFC.FindField("LocationConfidenceMeters")).ToString(), out LocationConfidenceMeters);
string Notes = dummyFeature.get_Value(templateFC.FindField("Notes")).ToString();
string RuleID = dummyFeature.get_Value(templateFC.FindField("RuleID")).ToString();
string Type = dummyFeature.get_Value(templateFC.FindField("Type")).ToString();
int IsConcealed = 0;
if (templateFC.Equals(commonFunctions.OpenFeatureClass(m_theWorkspace, "ContactsAndFaults")) == true)
{
result = int.TryParse(dummyFeature.get_Value(templateFC.FindField("IsConcealed")).ToString(), out IsConcealed);
}
// Destroy the dummy feature - must happen within an edit operation
ArcMap.Editor.StartOperation();
dummyFeature.Delete();
ArcMap.Editor.StopOperation("Remove Dummy Feature");
//Is the FeatureTemplate also for GeologicLines?
switch (GeologicLinesFL.FeatureClass.Equals(templateFC))
{
case true:
// Update the features to the FeatureTemplate
GeologicLinesAccess GeologicLinesUpdater = new GeologicLinesAccess(m_theWorkspace);
theFeature = theFeatureCursor.NextFeature();
while (theFeature != null)
{
// Find the GeologicLines feature to update
thisId = theFeature.get_Value(idFld).ToString();
GeologicLinesUpdater.AddGeologicLines("GeologicLines_ID = '" + thisId + "'");
GeologicLinesAccess.GeologicLine thisGeologicLine = GeologicLinesUpdater.GeologicLinesDictionary[thisId];
// Assign values from the FeatureTemplate
if (ExistenceConfidence != "")
thisGeologicLine.ExistenceConfidence = ExistenceConfidence;
if (IdentityConfidence != "")
thisGeologicLine.IdentityConfidence = IdentityConfidence;
if (Symbol != "")
thisGeologicLine.Symbol = Symbol;
if (Label != "")
thisGeologicLine.Label = Label;
if (LocationConfidenceMeters != 0.0)
thisGeologicLine.LocationConfidenceMeters = LocationConfidenceMeters;
if (Notes != "")
thisGeologicLine.Notes = Notes;
if (RuleID != "")
thisGeologicLine.RuleID = RuleID;
if (Type != "")
thisGeologicLine.Type = Type;
// Update the feature
GeologicLinesUpdater.UpdateGeologicLine(thisGeologicLine);
// Increment the cursor
theFeature = theFeatureCursor.NextFeature();
}
// Save changes
GeologicLinesUpdater.SaveGeologicLines();
break;
case false:
// Copy the features into the templateFC using the selected template as a guide
// Build DataAccess Classes for target FeatureClasses
ContactsAndFaultsAccess ContactsAndFaultsInserter = new ContactsAndFaultsAccess(m_theWorkspace);
// Find the target FeatureClass Name
string tableName = (templateFC as IDataset).Name;
// Parse the table name in order to strip out unneccessary bits of SDE tables
ISQLSyntax nameParser = (ISQLSyntax)m_theWorkspace;
string parsedDbName, parsedOwnerName, parsedTableName;
nameParser.ParseTableName(tableName, out parsedDbName, out parsedOwnerName, out parsedTableName);
// Will need to remove the selected feature from GeologicLines
GeologicLinesAccess GeologicLinesRemover = new GeologicLinesAccess(m_theWorkspace);
// Loop through the selected GeologicLines
theFeature = theFeatureCursor.NextFeature();
while (theFeature != null)
{
// Find the GeologicLines feature to remove
thisId = theFeature.get_Value(idFld).ToString();
GeologicLinesRemover.AddGeologicLines("GeologicLines_ID = '" + thisId + "'");
GeologicLinesAccess.GeologicLine thisGeologicLine = GeologicLinesRemover.GeologicLinesDictionary[thisId];
// Setup attributes
string DataSourceID = thisGeologicLine.DataSourceID;
IPolyline Shape = thisGeologicLine.Shape;
// Create the new feature in the template FeatureClass
switch (parsedTableName)
{
case "ContactsAndFaults":
// Insert the new GeologicLines
ContactsAndFaultsInserter.NewContactsAndFault(Type, IsConcealed, LocationConfidenceMeters, ExistenceConfidence, IdentityConfidence, Symbol, Label, Notes, DataSourceID, RuleID, Shape);
ContactsAndFaultsInserter.SaveContactsAndFaults();
// Clear out the dictionary so lines don't get added more than once.
ContactsAndFaultsInserter.ClearContactsAndFaults();
// Delete the old one
GeologicLinesRemover.DeleteGeologicLines(thisGeologicLine);
break;
default:
// This would happen if there's some other polyline featuretemplate selected. Just need to exit gracefully.
break;
}
// Increment the cursor
theFeature = theFeatureCursor.NextFeature();
}
break;
}
}
}
#endregion
break;
case esriGeometryType.esriGeometryPoint:
// Look for features selected in point FeatureClasses
// Note: I don't care about FeatureTemplates in Station or Sample featureclasses.
#region OrientationPoints
IFeatureLayer OrientationPointsFL = commonFunctions.FindFeatureLayer(m_theWorkspace, "OrientationPoints");
if (OrientationPointsFL != null)
{
// Found OrientationPoints. Check for a selection
IFeatureSelection selectedFeatures = OrientationPointsFL as IFeatureSelection;
if (selectedFeatures.SelectionSet.Count > 0)
{
// OrientationPoints were selected. Pass the selection into a cursor.
ISelectionSet featureSelectionSet = selectedFeatures.SelectionSet;
ICursor theCursor;
featureSelectionSet.Search(null, false, out theCursor);
IFeatureCursor theFeatureCursor = (IFeatureCursor)theCursor;
// Some variables to declare before the loops
int idFld = theFeatureCursor.FindField("OrientationPoints_ID");
IFeature theFeature;
string thisId;
// Construct a dummy feature to get attributes from
IFeature dummyFeature = templateFC.CreateFeature();
theCurrentTemplate.SetDefaultValues(dummyFeature);
string Type = dummyFeature.get_Value(templateFC.FindField("Type")).ToString();
string IdentityConfidence = dummyFeature.get_Value(templateFC.FindField("IdentityConfidence")).ToString();
string Label = dummyFeature.get_Value(templateFC.FindField("Label")).ToString();
int PlotAtScale;
bool result = int.TryParse(dummyFeature.get_Value(templateFC.FindField("PlotAtScale")).ToString(), out PlotAtScale);
double OrientationConfidenceDegrees;
result = double.TryParse(dummyFeature.get_Value(templateFC.FindField("OrientationConfidenceDegrees")).ToString(), out OrientationConfidenceDegrees);
string Notes = dummyFeature.get_Value(templateFC.FindField("Notes")).ToString();
int RuleID;
result = int.TryParse(dummyFeature.get_Value(templateFC.FindField("RuleID")).ToString(), out RuleID);
// Destroy the dummy feature - must happen within an edit operation
ArcMap.Editor.StartOperation();
dummyFeature.Delete();
ArcMap.Editor.StopOperation("Remove Dummy Feature");
//Is the FeatureTemplate also for OrientationPoints?
switch (OrientationPointsFL.FeatureClass.Equals(templateFC))
{
case true:
// Update the features to the FeatureTemplate
OrientationPointsAccess OrientationPointsUpdater = new OrientationPointsAccess(m_theWorkspace);
theFeature = theFeatureCursor.NextFeature();
while (theFeature != null)
{
// Find the OrientationPoints feature to update
thisId = theFeature.get_Value(idFld).ToString();
OrientationPointsUpdater.AddOrientationPoints("OrientationPoints_ID = '" + thisId + "'");
OrientationPointsAccess.OrientationPoint thisOrientationPoint = OrientationPointsUpdater.OrientationPointsDictionary[thisId];
// Assign values from the FeatureTemplate
thisOrientationPoint.Type = Type;
thisOrientationPoint.IdentityConfidence = IdentityConfidence;
thisOrientationPoint.Label = Label;
thisOrientationPoint.PlotAtScale = PlotAtScale;
thisOrientationPoint.OrientationConfidenceDegrees = OrientationConfidenceDegrees;
thisOrientationPoint.Notes = Notes;
thisOrientationPoint.RuleID = RuleID;
// Update the feature
OrientationPointsUpdater.UpdateOrientationPoint(thisOrientationPoint);
// Increment the cursor
theFeature = theFeatureCursor.NextFeature();
}
// Save changes
OrientationPointsUpdater.SaveOrientationPoints();
break;
case false:
// User needs to select an appropriate feature template
MessageBox.Show("Please select a FeatureTemplate appropriate for the type of features you've selected" + Environment.NewLine + "You've selected some Orientation Data on the map but have not selected a structural FeatureTemplate.");
break;
}
}
}
#endregion
break;
case esriGeometryType.esriGeometryPolygon:
// Look for features selected in polygon FeatureClasses
#region MapUnitPolys
IFeatureLayer MapUnitPolysFL = commonFunctions.FindFeatureLayer(m_theWorkspace, "MapUnitPolys");
if (MapUnitPolysFL != null)
{
// Found MapUnitPolys. Check for a selection
IFeatureSelection selectedFeatures = MapUnitPolysFL as IFeatureSelection;
if (selectedFeatures.SelectionSet.Count > 0)
{
// MapUnitPolys were selected. Pass the selection into a cursor.
ISelectionSet featureSelectionSet = selectedFeatures.SelectionSet;
ICursor theCursor;
featureSelectionSet.Search(null, false, out theCursor);
IFeatureCursor theFeatureCursor = (IFeatureCursor)theCursor;
// Some variables to declare before the loops
int idFld = theFeatureCursor.FindField("MapUnitPolys_ID");
IFeature theFeature;
string thisId;
// Construct a dummy feature to get attributes from
IFeature dummyFeature = templateFC.CreateFeature();
theCurrentTemplate.SetDefaultValues(dummyFeature);
string MapUnit = dummyFeature.get_Value(templateFC.FindField("MapUnit")).ToString();
string IdentityConfidence = dummyFeature.get_Value(templateFC.FindField("IdentityConfidence")).ToString();
string Label = dummyFeature.get_Value(templateFC.FindField("Label")).ToString();
string Notes = dummyFeature.get_Value(templateFC.FindField("Notes")).ToString();
string Symbol = dummyFeature.get_Value(templateFC.FindField("Symbol")).ToString();
// Destroy the dummy feature - must happen within an edit operation
ArcMap.Editor.StartOperation();
dummyFeature.Delete();
ArcMap.Editor.StopOperation("Remove Dummy Feature");
//Is the FeatureTemplate also for MapUnitPolys?
switch (MapUnitPolysFL.FeatureClass.Equals(templateFC))
{
case true:
// Update the features to the FeatureTemplate
MapUnitPolysAccess MapUnitPolysUpdater = new MapUnitPolysAccess(m_theWorkspace);
theFeature = theFeatureCursor.NextFeature();
while (theFeature != null)
{
// Find the MapUnitPolys feature to update
thisId = theFeature.get_Value(idFld).ToString();
MapUnitPolysUpdater.AddMapUnitPolys("MapUnitPolys_ID = '" + thisId + "'");
MapUnitPolysAccess.MapUnitPoly thisMapUnitPoly = MapUnitPolysUpdater.MapUnitPolysDictionary[thisId];
// Assign values from the FeatureTemplate
thisMapUnitPoly.MapUnit = MapUnit;
thisMapUnitPoly.IdentityConfidence = IdentityConfidence;
thisMapUnitPoly.Label = Label;
thisMapUnitPoly.Notes = Notes;
thisMapUnitPoly.Symbol = Symbol;
// Update the feature
MapUnitPolysUpdater.UpdateMapUnitPoly(thisMapUnitPoly);
// Increment the cursor
theFeature = theFeatureCursor.NextFeature();
}
// Save changes
MapUnitPolysUpdater.SaveMapUnitPolys();
break;
case false:
// Copy the features into the templateFC using the selected template as a guide
// Build DataAccess Classes for target FeatureClasses
OtherPolysAccess OtherPolysInserter = new OtherPolysAccess(m_theWorkspace);
// Find the target FeatureClass Name
string tableName = (templateFC as IDataset).Name;
// Parse the table name in order to strip out unneccessary bits of SDE tables
ISQLSyntax nameParser = (ISQLSyntax)m_theWorkspace;
string parsedDbName, parsedOwnerName, parsedTableName;
nameParser.ParseTableName(tableName, out parsedDbName, out parsedOwnerName, out parsedTableName);
// Will need to remove the selected feature from MapUnitPolys
MapUnitPolysAccess MapUnitPolysRemover = new MapUnitPolysAccess(m_theWorkspace);
// Loop through the selected MapUnitPolys
theFeature = theFeatureCursor.NextFeature();
while (theFeature != null)
{
// Find the MapUnitPolys feature to remove
thisId = theFeature.get_Value(idFld).ToString();
MapUnitPolysRemover.AddMapUnitPolys("MapUnitPolys_ID = '" + thisId + "'");
MapUnitPolysAccess.MapUnitPoly thisMapUnitPoly = MapUnitPolysRemover.MapUnitPolysDictionary[thisId];
// Setup attributes
string DataSourceID = thisMapUnitPoly.DataSourceID;
IPolygon Shape = thisMapUnitPoly.Shape;
// Create the new feature in the template FeatureClass
switch (parsedTableName)
{
case "OtherPolys":
// Insert the new GeologicLines
OtherPolysInserter.NewOtherPoly(MapUnit, IdentityConfidence, Label, Notes, DataSourceID, Symbol, Shape);
OtherPolysInserter.SaveOtherPolys();
// Clear out the dictionary so lines don't get added more than once.
OtherPolysInserter.ClearOtherPolys();
// Delete the old one
MapUnitPolysRemover.DeleteMapUnitPolys(thisMapUnitPoly);
break;
default:
// This would happen if there's some other polyline featuretemplate selected. Just need to exit gracefully.
break;
}
// Increment the cursor
theFeature = theFeatureCursor.NextFeature();
}
break;
}
}
}
#endregion
#region OtherPolys
IFeatureLayer OtherPolysFL = commonFunctions.FindFeatureLayer(m_theWorkspace, "OtherPolys");
if (OtherPolysFL != null)
{
// Found OtherPolys. Check for a selection
IFeatureSelection selectedFeatures = OtherPolysFL as IFeatureSelection;
if (selectedFeatures.SelectionSet.Count > 0)
{
// OtherPolys were selected. Pass the selection into a cursor.
ISelectionSet featureSelectionSet = selectedFeatures.SelectionSet;
ICursor theCursor;
featureSelectionSet.Search(null, false, out theCursor);
IFeatureCursor theFeatureCursor = (IFeatureCursor)theCursor;
// Some variables to declare before the loops
int idFld = theFeatureCursor.FindField("OtherPolys_ID");
IFeature theFeature;
string thisId;
// Construct a dummy feature to get attributes from
IFeature dummyFeature = templateFC.CreateFeature();
theCurrentTemplate.SetDefaultValues(dummyFeature);
string MapUnit = dummyFeature.get_Value(templateFC.FindField("MapUnit")).ToString();
string IdentityConfidence = dummyFeature.get_Value(templateFC.FindField("IdentityConfidence")).ToString();
string Label = dummyFeature.get_Value(templateFC.FindField("Label")).ToString();
string Notes = dummyFeature.get_Value(templateFC.FindField("Notes")).ToString();
string Symbol = dummyFeature.get_Value(templateFC.FindField("Symbol")).ToString();
// Destroy the dummy feature - must happen within an edit operation
ArcMap.Editor.StartOperation();
dummyFeature.Delete();
ArcMap.Editor.StopOperation("Remove Dummy Feature");
//Is the FeatureTemplate also for OtherPolys?
switch (OtherPolysFL.FeatureClass.Equals(templateFC))
{
case true:
// Update the features to the FeatureTemplate
OtherPolysAccess OtherPolysUpdater = new OtherPolysAccess(m_theWorkspace);
theFeature = theFeatureCursor.NextFeature();
while (theFeature != null)
{
// Find the OtherPolys feature to update
thisId = theFeature.get_Value(idFld).ToString();
OtherPolysUpdater.AddOtherPolys("OtherPolys_ID = '" + thisId + "'");
OtherPolysAccess.OtherPoly thisOtherPoly = OtherPolysUpdater.OtherPolysDictionary[thisId];
// Assign values from the FeatureTemplate
thisOtherPoly.MapUnit = MapUnit;
thisOtherPoly.IdentityConfidence = IdentityConfidence;
thisOtherPoly.Label = Label;
thisOtherPoly.Notes = Notes;
thisOtherPoly.Symbol = Symbol;
// Update the feature
OtherPolysUpdater.UpdateOtherPoly(thisOtherPoly);
// Increment the cursor
theFeature = theFeatureCursor.NextFeature();
}
// Save changes
OtherPolysUpdater.SaveOtherPolys();
break;
case false:
// Copy the features into the templateFC using the selected template as a guide
// Build DataAccess Classes for target FeatureClasses
MapUnitPolysAccess MapUnitPolysInserter = new MapUnitPolysAccess(m_theWorkspace);
// Find the target FeatureClass Name
string tableName = (templateFC as IDataset).Name;
// Parse the table name in order to strip out unneccessary bits of SDE tables
ISQLSyntax nameParser = (ISQLSyntax)m_theWorkspace;
string parsedDbName, parsedOwnerName, parsedTableName;
nameParser.ParseTableName(tableName, out parsedDbName, out parsedOwnerName, out parsedTableName);
// Will need to remove the selected feature from OtherPolys
OtherPolysAccess OtherPolysRemover = new OtherPolysAccess(m_theWorkspace);
// Loop through the selected OtherPolys
theFeature = theFeatureCursor.NextFeature();
while (theFeature != null)
{
// Find the OtherPolys feature to remove
thisId = theFeature.get_Value(idFld).ToString();
OtherPolysRemover.AddOtherPolys("OtherPolys_ID = '" + thisId + "'");
OtherPolysAccess.OtherPoly thisOtherPoly = OtherPolysRemover.OtherPolysDictionary[thisId];
// Setup attributes
string DataSourceID = thisOtherPoly.DataSourceID;
IPolygon Shape = thisOtherPoly.Shape;
// Create the new feature in the template FeatureClass
switch (parsedTableName)
{
case "MapUnitPolys":
// Insert the new GeologicLines
MapUnitPolysInserter.NewMapUnitPoly(MapUnit, IdentityConfidence, Label, Notes, DataSourceID, Symbol, Shape);
MapUnitPolysInserter.SaveMapUnitPolys();
// Clear out the dictionary so lines don't get added more than once.
MapUnitPolysInserter.ClearMapUnitPolys();
// Delete the old one
OtherPolysRemover.DeleteOtherPolys(thisOtherPoly);
break;
default:
// This would happen if there's some other polygon featuretemplate selected. Just need to exit gracefully.
break;
}
// Increment the cursor
theFeature = theFeatureCursor.NextFeature();
}
break;
}
}
}
#endregion
break;
}
}
private Dictionary<string, object> BuildDataAccessFromSelection()
{
// Will be building SQL Where Clauses for each possible selected thing
string MapUnitPolysSearch = "MapUnitPolys_ID = '";
string DataSourcePolysSearch = "DataSourcePolys_ID = '";
string OtherPolysSearch = "OtherPolys_ID = '";
string ContactsAndFaultsSearch = "ContactsAndFaults_ID = '";
string GeologicLinesSearch = "GeologicLines_ID = '";
string StationsSearch = "Stations_ID = '";
string GenericSamplesSearch = "GenericSamples_ID = '";
string OrientationPointsSearch = "OrientationPoints_ID = '";
string GlossarySearch = "Glossary_ID = '";
string DataSourcesSearch = "DataSources_ID = '";
string DescriptionOfMapUnitsSearch = "DescriptionOfMapUnits_ID = '";
// This object will be populated and returned
Dictionary<string, object> dataAccessClasses = new Dictionary<string, object>();
#region Selected FEATURES
// Get an enumeration of the selected features
IEnumFeature selectionEnum = ArcMap.Document.FocusMap.FeatureSelection as IEnumFeature;
// Loop through the features to build queries to find the features
IRow thisFeature = selectionEnum.Next() as IRow;
while (thisFeature != null)
{
// Get the Table Name
string tableName = (thisFeature.Table as IDataset).Name;
// Parse the table name in order to strip out unneccessary bits of SDE tables
ISQLSyntax nameParser = (ISQLSyntax)m_theWorkspace;
string parsedDbName, parsedOwnerName, parsedTableName;
nameParser.ParseTableName(tableName, out parsedDbName, out parsedOwnerName, out parsedTableName);
// Build the SQL Where Clause depending on the table...
switch (parsedTableName)
{
case "MapUnitPolys":
MapUnitPolysSearch += thisFeature.get_Value(thisFeature.Table.FindField("MapUnitPolys_ID")) + "' OR MapUnitPolys_ID = '";
break;
case "DataSourcePolys":
DataSourcePolysSearch += thisFeature.get_Value(thisFeature.Table.FindField("DataSourcePolys_ID")) + "' OR DataSourcePolys_ID = '";
break;
case "OtherPolys":
OtherPolysSearch += thisFeature.get_Value(thisFeature.Table.FindField("OtherPolys_ID")) + "' OR OtherPolys_ID = '";
break;
case "ContactsAndFaults":
ContactsAndFaultsSearch += thisFeature.get_Value(thisFeature.Table.FindField("ContactsAndFaults_ID")) + "' OR ContactsAndFaults_ID = '";
break;
case "GeologicLines":
GeologicLinesSearch += thisFeature.get_Value(thisFeature.Table.FindField("GeologicLines_ID")) + "' OR GeologicLines_ID = '";
break;
case "Stations":
StationsSearch += thisFeature.get_Value(thisFeature.Table.FindField("Stations_ID")) + "' OR Stations_ID = '";
break;
case "GenericSamples":
GenericSamplesSearch += thisFeature.get_Value(thisFeature.Table.FindField("GenericSamples_ID")) + "' OR GenericSamples_ID = '";
break;
case "OrientationPoints":
OrientationPointsSearch += thisFeature.get_Value(thisFeature.Table.FindField("OrientationPoints_ID")) + "' OR OrientationPoints_ID = '";
break;
}
// Iterate the enumeration
thisFeature = selectionEnum.Next();
}
#region "Build Dictionary"
// Clean up the Where Clauses, create the data access classes, and then add it to the dictionary
// MapUnitPolys
if (MapUnitPolysSearch != "MapUnitPolys_ID = '")
{
MapUnitPolysSearch = MapUnitPolysSearch.Remove(MapUnitPolysSearch.Length - 23);
MapUnitPolysAccess MapUnitPolysRecords = new MapUnitPolysAccess(m_theWorkspace);
MapUnitPolysRecords.AddMapUnitPolys(MapUnitPolysSearch);
dataAccessClasses.Add("MapUnitPolys", MapUnitPolysRecords);
}
if (DataSourcePolysSearch != "DataSourcePolys_ID = '")
{
DataSourcePolysSearch = DataSourcePolysSearch.Remove(DataSourcePolysSearch.Length - 25);
DataSourcePolysAccess DataSourcePolysRecords = new DataSourcePolysAccess(m_theWorkspace);
DataSourcePolysRecords.AddDataSourcePolys(DataSourcePolysSearch);
dataAccessClasses.Add("DataSourcePolys", DataSourcePolysRecords);
}
// OtherPolys
if (OtherPolysSearch != "OtherPolys_ID = '")
{
OtherPolysSearch = OtherPolysSearch.Remove(OtherPolysSearch.Length - 23);
OtherPolysAccess OtherPolysRecords = new OtherPolysAccess(m_theWorkspace);
OtherPolysRecords.AddOtherPolys(OtherPolysSearch);
dataAccessClasses.Add("OtherPolys", OtherPolysRecords);
}
// ContactsAndFaults
if (ContactsAndFaultsSearch != "ContactsAndFaults_ID = '")
{
ContactsAndFaultsSearch = ContactsAndFaultsSearch.Remove(ContactsAndFaultsSearch.Length - 28);
ContactsAndFaultsAccess ContactsAndFaultsRecords = new ContactsAndFaultsAccess(m_theWorkspace);
ContactsAndFaultsRecords.AddContactsAndFaults(ContactsAndFaultsSearch);
dataAccessClasses.Add("ContactsAndFaults", ContactsAndFaultsRecords);
}
// GeologicLines
if (GeologicLinesSearch != "GeologicLines_ID = '")
{
GeologicLinesSearch = GeologicLinesSearch.Remove(GeologicLinesSearch.Length - 24);
GeologicLinesAccess GeologicLinesRecords = new GeologicLinesAccess(m_theWorkspace);
GeologicLinesRecords.AddGeologicLines(GeologicLinesSearch);
dataAccessClasses.Add("GeologicLines", GeologicLinesRecords);
}
// Stations
if (StationsSearch != "Stations_ID = '")
{
StationsSearch = StationsSearch.Remove(StationsSearch.Length - 19);
StationsAccess StationsRecords = new StationsAccess(m_theWorkspace);
StationsRecords.AddStations(StationsSearch);
dataAccessClasses.Add("Stations", StationsRecords);
}
// GenericSamples
if (GenericSamplesSearch != "GenericSamples_ID = '")
{
GenericSamplesSearch = GenericSamplesSearch.Remove(GenericSamplesSearch.Length - 23);
GenericSamplesAccess GenericSamplesRecords = new GenericSamplesAccess(m_theWorkspace);
GenericSamplesRecords.AddGenericSamples(GenericSamplesSearch);
dataAccessClasses.Add("GenericSamples", GenericSamplesRecords);
}
// OrientationPoints
if (OrientationPointsSearch != "OrientationPoints_ID = '")
{
OrientationPointsSearch = OrientationPointsSearch.Remove(OrientationPointsSearch.Length - 32);
OrientationPointsAccess OrientationPointsRecords = new OrientationPointsAccess(m_theWorkspace);
OrientationPointsRecords.AddOrientationPoints(OrientationPointsSearch);
dataAccessClasses.Add("OrientationPoints", OrientationPointsRecords);
}
#endregion
#endregion
#region Selected TABLE ROWS
// Loop through the tables in the map
IStandaloneTableCollection tableCollection = ArcMap.Document.FocusMap as IStandaloneTableCollection;
for (int i = 0; i <= tableCollection.StandaloneTableCount - 1; i++)
{
// Get one of the tables
IStandaloneTable thisTable = tableCollection.StandaloneTable[i];
string tableName = null;
if (thisTable.Table == null)
tableName = thisTable.Name;
else
tableName = (thisTable.Table as IDataset).Name;
// Parse the table name in order to strip out unneccessary bits of SDE tables
ISQLSyntax nameParser = (ISQLSyntax)m_theWorkspace;
string parsedDbName, parsedOwnerName, parsedTableName;
nameParser.ParseTableName(tableName, out parsedDbName, out parsedOwnerName, out parsedTableName);
// Find the selection
ITableSelection selectedRows = thisTable as ITableSelection;
ISelectionSet theSelection = selectedRows.SelectionSet;
// Iterate if there are no selected rows
if (theSelection == null)
continue;
else
if (theSelection.Count == 0)
continue;
// Loop through selected rows, build the where clauses up.
ICursor theCursor;
theSelection.Search(null, false, out theCursor);
IRow theRow = theCursor.NextRow();
while (theRow != null)
{
switch (parsedTableName)
{
case "Glossary":
GlossarySearch += theRow.get_Value(thisTable.Table.FindField("Glossary_ID")) + "' OR Glossary_ID = '";
break;
case "DataSources":
DataSourcesSearch += theRow.get_Value(thisTable.Table.FindField("DataSources_ID")) + "' OR DataSources_ID = '";
break;
case "DescriptionOfMapUnits":
DescriptionOfMapUnitsSearch += theRow.get_Value(thisTable.Table.FindField("DescriptionOfMapUnits_ID")) + "' OR DescriptionOfMapUnits_ID = '";
break;
}
// Iterate
theRow = theCursor.NextRow();
}
}
#region Build Dictionary
// Clean up the Where Clauses, create the data access classes, and then add it to the dictionary
// Glossary
if (GlossarySearch != "Glossary_ID = '")
{
GlossarySearch = GlossarySearch.Remove(GlossarySearch.Length - 19);
GlossaryAccess GlossaryRecords = new GlossaryAccess(m_theWorkspace);
GlossaryRecords.AddGlossary(GlossarySearch);
dataAccessClasses.Add("Glossary", GlossaryRecords);
}
// DataSources
if (DataSourcesSearch != "DataSources_ID = '")
{
DataSourcesSearch = DataSourcesSearch.Remove(DataSourcesSearch.Length - 22);
DataSourcesAccess DataSourcesRecords = new DataSourcesAccess(m_theWorkspace);
DataSourcesRecords.AddDataSources(DataSourcesSearch);
dataAccessClasses.Add("DataSources", DataSourcesRecords);
}
// DescriptionOfMapUnits
if (DescriptionOfMapUnitsSearch != "DescriptionOfMapUnits_ID = '")
{
DescriptionOfMapUnitsSearch = DescriptionOfMapUnitsSearch.Remove(DescriptionOfMapUnitsSearch.Length - 32);
DescriptionOfMapUnitsAccess DescriptionOfMapUnitsRecords = new DescriptionOfMapUnitsAccess(m_theWorkspace);
DescriptionOfMapUnitsRecords.AddDescriptionOfMapUnits(DescriptionOfMapUnitsSearch);
dataAccessClasses.Add("DescriptionOfMapUnits", DescriptionOfMapUnitsRecords);
}
#endregion
#endregion
// Okay! Return the dictionary that has been built
return dataAccessClasses;
}
private void UpdateDataSources(Dictionary<string, object> dataAccessClasses)
{
// Get the Data Source to set
string dataSourceID = commonFunctions.GetCurrentDataSourceID();
// Bail if there isn't one
if (dataSourceID == null) { return; }
// Get DataAccess Classes to perform updates
MapUnitPolysAccess mapUnitPolysAccess = new MapUnitPolysAccess(m_theWorkspace);
DataSourcePolysAccess dataSourcePolysAccess = new DataSourcePolysAccess(m_theWorkspace);
OtherPolysAccess OtherPolysAccess = new OtherPolysAccess(m_theWorkspace);
ContactsAndFaultsAccess ContactsAndFaultsAccess = new ContactsAndFaultsAccess(m_theWorkspace);
GeologicLinesAccess GeologicLinesAccess = new GeologicLinesAccess(m_theWorkspace);
StationsAccess StationsAccess = new StationsAccess(m_theWorkspace);
GenericSamplesAccess GenericSamplesAccess = new GenericSamplesAccess(m_theWorkspace);
OrientationPointsAccess OrientationPointsAccess = new OrientationPointsAccess(m_theWorkspace);
GlossaryAccess GlossaryAccess = new GlossaryAccess(m_theWorkspace);
DescriptionOfMapUnitsAccess DescriptionOfMapUnitsAccess = new DescriptionOfMapUnitsAccess(m_theWorkspace);
// Loop through the dictionary
foreach (KeyValuePair<string, object> anEntry in dataAccessClasses)
{
// What table does this come from?
switch (anEntry.Key)
{
case "MapUnitPolys":
// Loop through the records in the data access object that comes in
MapUnitPolysAccess thisMapUnitPolysAccess = (MapUnitPolysAccess)anEntry.Value;
foreach (KeyValuePair<string, MapUnitPolysAccess.MapUnitPoly> MapUnitPolysToUpdate in thisMapUnitPolysAccess.MapUnitPolysDictionary)
{
MapUnitPolysAccess.MapUnitPoly thisMapUnitPoly = (MapUnitPolysAccess.MapUnitPoly)MapUnitPolysToUpdate.Value;
thisMapUnitPoly.DataSourceID = dataSourceID;
mapUnitPolysAccess.UpdateMapUnitPoly(thisMapUnitPoly);
}
mapUnitPolysAccess.SaveMapUnitPolys();
break;
case "DataSourcePolys":
// Loop through the records in the data access object that comes in
DataSourcePolysAccess thisDataSourcePolysAccess = (DataSourcePolysAccess)anEntry.Value;
foreach (KeyValuePair<string, DataSourcePolysAccess.DataSourcePoly> DataSourcePolysToUpdate in thisDataSourcePolysAccess.DataSourcePolysDictionary)
{
DataSourcePolysAccess.DataSourcePoly thisDataSourcePoly = (DataSourcePolysAccess.DataSourcePoly)DataSourcePolysToUpdate.Value;
thisDataSourcePoly.DataSourceID = dataSourceID;
dataSourcePolysAccess.UpdateDataSourcePoly(thisDataSourcePoly);
}
dataSourcePolysAccess.SaveDataSourcePolys();
break;
case "OtherPolys":
OtherPolysAccess thisOtherPolysAccess = (OtherPolysAccess)anEntry.Value;
foreach (KeyValuePair<string, OtherPolysAccess.OtherPoly> OtherPolysToUpdate in thisOtherPolysAccess.OtherPolysDictionary)
{
OtherPolysAccess.OtherPoly thisOtherPoly = (OtherPolysAccess.OtherPoly)OtherPolysToUpdate.Value;
thisOtherPoly.DataSourceID = dataSourceID;
OtherPolysAccess.UpdateOtherPoly(thisOtherPoly);
}
OtherPolysAccess.SaveOtherPolys();
break;
case "ContactsAndFaults":
ContactsAndFaultsAccess thisContactsAndFaultsAccess = (ContactsAndFaultsAccess)anEntry.Value;
foreach (KeyValuePair<string, ContactsAndFaultsAccess.ContactsAndFault> ContactsAndFaultsToUpdate in thisContactsAndFaultsAccess.ContactsAndFaultsDictionary)
{
ContactsAndFaultsAccess.ContactsAndFault thisContactsAndFault = (ContactsAndFaultsAccess.ContactsAndFault)ContactsAndFaultsToUpdate.Value;
thisContactsAndFault.DataSourceID = dataSourceID;
ContactsAndFaultsAccess.UpdateContactsAndFault(thisContactsAndFault);
}
ContactsAndFaultsAccess.SaveContactsAndFaults();
break;
case "GeologicLines":
GeologicLinesAccess thisGeologicLinesAccess = (GeologicLinesAccess)anEntry.Value;
foreach (KeyValuePair<string, GeologicLinesAccess.GeologicLine> GeologicLinesToUpdate in thisGeologicLinesAccess.GeologicLinesDictionary)
{
GeologicLinesAccess.GeologicLine thisGeologicLine = (GeologicLinesAccess.GeologicLine)GeologicLinesToUpdate.Value;
thisGeologicLine.DataSourceID = dataSourceID;
GeologicLinesAccess.UpdateGeologicLine(thisGeologicLine);
}
GeologicLinesAccess.SaveGeologicLines();
break;
case "Stations":
StationsAccess thisStationsAccess = (StationsAccess)anEntry.Value;
foreach (KeyValuePair<string, StationsAccess.Station> StationsToUpdate in thisStationsAccess.StationsDictionary)
{
StationsAccess.Station thisStation = (StationsAccess.Station)StationsToUpdate.Value;
thisStation.DataSourceID = dataSourceID;
StationsAccess.UpdateStation(thisStation);
}
StationsAccess.SaveStations();
break;
case "GenericSamples":
GenericSamplesAccess thisGenericSamplesAccess = (GenericSamplesAccess)anEntry.Value;
foreach (KeyValuePair<string, GenericSamplesAccess.GenericSample> GenericSamplesToUpdate in thisGenericSamplesAccess.GenericSamplesDictionary)
{
GenericSamplesAccess.GenericSample thisGenericSample = (GenericSamplesAccess.GenericSample)GenericSamplesToUpdate.Value;
thisGenericSample.DataSourceID = dataSourceID;
GenericSamplesAccess.UpdateGenericSample(thisGenericSample);
}
GenericSamplesAccess.SaveGenericSamples();
break;
case "OrientationPoints":
OrientationPointsAccess thisOrientationPointsAccess = (OrientationPointsAccess)anEntry.Value;
foreach (KeyValuePair<string, OrientationPointsAccess.OrientationPoint> OrientationPointsToUpdate in thisOrientationPointsAccess.OrientationPointsDictionary)
{
OrientationPointsAccess.OrientationPoint thisOrientationPoint = (OrientationPointsAccess.OrientationPoint)OrientationPointsToUpdate.Value;
thisOrientationPoint.DataSourceID = dataSourceID;
OrientationPointsAccess.UpdateOrientationPoint(thisOrientationPoint);
}
OrientationPointsAccess.SaveOrientationPoints();
break;
case "Glossary":
GlossaryAccess thisGlossaryAccess = (GlossaryAccess)anEntry.Value;
foreach (KeyValuePair<string, GlossaryAccess.Glossary> GlossaryToUpdate in thisGlossaryAccess.GlossaryDictionary)
{
GlossaryAccess.Glossary thisGlossary = (GlossaryAccess.Glossary)GlossaryToUpdate.Value;
thisGlossary.DefinitionSourceID = dataSourceID;
GlossaryAccess.UpdateGlossary(thisGlossary);
}
GlossaryAccess.SaveGlossary();
break;
case "DescriptionOfMapUnits":
DescriptionOfMapUnitsAccess thisDescriptionOfMapUnitsAccess = (DescriptionOfMapUnitsAccess)anEntry.Value;
foreach (KeyValuePair<string, DescriptionOfMapUnitsAccess.DescriptionOfMapUnit> DescriptionOfMapUnitsToUpdate in thisDescriptionOfMapUnitsAccess.DescriptionOfMapUnitsDictionary)
{
DescriptionOfMapUnitsAccess.DescriptionOfMapUnit thisDescriptionOfMapUnit = (DescriptionOfMapUnitsAccess.DescriptionOfMapUnit)DescriptionOfMapUnitsToUpdate.Value;
thisDescriptionOfMapUnit.DescriptionSourceID = dataSourceID;
DescriptionOfMapUnitsAccess.UpdateDescriptionOfMapUnit(thisDescriptionOfMapUnit);
}
DescriptionOfMapUnitsAccess.SaveDescriptionOfMapUnits();
break;
}
}
}